Run payroll simulation in ABAP and get the payroll result in ABAP
Dear Expert,
Is there anyway I can simulate the payroll for a particular payperiod and employee in ABAP and then get the pay result for it in ABAP?
Please help
Best Regards,
WF
I doubt it. If you run payroll in simulation mode then no clusters gets created. This means no physical commit on DB takes places once results are generated. On the other hand capturing the results in flow is not probably achieveable too. This would mean interfering in payroll inner calucation or capturing them at the end (once results are dispalyed). You can of course send them to spool but importing its content to ABAP would be meaningless as the output is in tree form.
So in my opinion there is no such way.
Regards
Marcin
Similar Messages
-
How to sample an analog signal, simulated on labview and get the sample values.
My project involves this particular detail where i have to sample a simulated sine wave and get the samples and compare them so as to select a particular length for hanning window.Then it also requires me to experiment with the window size so as to get more efficient data out of the sampled signals. please help me with the sampling part and guide me as to how to perform a hanning window operation on the sampled signal. I have directly used the spectral analysis tool which involves getting a FFT spectrum by a default hanning window setting. But since i have to experiment with the window size and variations, guide me with the sampling part and applying a separate hanning window. Thank you.
bhardoo wrote:
My project involves this particular detail where i have to sample a simulated sine wave and get the samples and compare them so as to select a particular length for hanning window.Then it also requires me to experiment with the window size so as to get more efficient data out of the sampled signals. please help me with the sampling part and guide me as to how to perform a hanning window operation on the sampled signal. I have directly used the spectral analysis tool which involves getting a FFT spectrum by a default hanning window setting. But since i have to experiment with the window size and variations, guide me with the sampling part and applying a separate hanning window. Thank you.
What do you mean by i have to sample a simulated sine wave?
the sine generator will provide you with a waveform (or an array of values you can use), there are basic vis to do all this, rigth click on the vi and select help to get detailed information.
Post your vi if you have trouble with details.
How much do you know about LabVIEW and signal theorie?
Greetings from Germany
Henrik
LV since v3.1
“ground” is a convenient fantasy
'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ' -
I tried to install yosemite yesterday and my computer goes through the whole installation process and then to a blank white screen. I've rebooted, I've reinstalled several times and get the same result. Two days wasted and I can't use my computer!!
I don't know if you've already resolved your problem, but I had the same thing, it took me 6 hours to fix it. I had the exact same as you, installed the update and then it went to a white screen. After trying start up holding down cmmd r or holding down the alt key to try to install it again, nothing worked, same result every time. Then an angel came to me here somewhere but I can't find it now to thank him. Start in safe mode, press shift once you hear the start up chime and hold it down until you hear it again. Installation completion box came up and it was working. turn off computer and start up again normally and all is well. Except my final cut pro x doesn't work with it, have to update that now too. same as when I updated to mavericks.
Hope this helps. -
My iphone 6 connects to the car via bluetooth, the music works good, but the phone calls does not work. It looks like it is working but doesn't. I have tried in my Hyundai Sonata and a Dodge Dart rent car and get the same results. I updated the last 8.0.2. It worked the first day i had the phone, and then i updated to Ios 8.0.2 and it quit working.
Now when i get in the car, it acts like it is connected and makes the same call it was on after syncing to bluetooth, but it really isn't on a call. This is happening on both cars.
Does anyone know if this is the phone and i need to take it to Apple or if there is an issue that Apple is working on getting a fix for?
My son in law has the exact same phone as me, we both got the on 10/6, he had a Dodge Dart and his is working via bluetooth.
Someone HELP please, as i consider this a safety issue by not having my calls go to bluetooth.We had the same problem, but figure out the solution.
You MUST have at least 1 song added to your ITUNE! After you add a free song, then everything else should work as normal!
Hope this helps! -
Running report and get the report result with coding
Hi all,
In our R/3 system, there is a custom sales report.
My question is: is there possibility to get data by running this report and grab it the result with code and store it in internal table?
Sorry if my question too basic because I am not abaper
I am just wondering to find new solution for my project.
Regards,
StephMy requirement is: I want to get the result from this report
(rather than try to get the data from SAP original table, because this report is very complicated with a lot of selection data) and use it this result into my new program.
The mechanism that I want is pull the result from the current report, not to add some code in current report to push into new program, to avoid changed the report.
Btw, the output of this report not only the excel file, we can also run this report on foreground mode and see the result.
The report is not ALV report.
Regards,
Steph -
I'm trying to download the latest version of iTunes and get the message "There is a problem with this Windows Installer package. A program required for this install to complete could not be run." I have no clue what to do with this to resolve the issue. Thanks for any help!
Repair your Apple software update.
Go to START > ALL PROGRAMS > Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START > CONTROL PANEL/ > Add n Remove Programs, highlight ASU and click CHANGE then REPAIR -
trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT adminstrator or Adobe customer support for help
I already Uninstalled and reinstalled the product and it still does not work.Hi,
Try to uninstall the software again and you have to manually
Delete the following folders:
[Startup Disk]/Library/Application Support/Adobe/Adobe PCD
[Startup Disk]/Library/Application Support/Adobe/caps
[Startup Disk]/Library/Application Support/Adobe/backup
[Startup Disk]/Library/Preferences/FLEXnet Publisher/
[Startup Disk]/Library/Application Support/FLEXnet Publisher/
Go to Applications-->Utilities-->Disk Utility, Open it and Select the MAC HD and then click on Repair permissions.
After that try to run the cleaner tool as mentioned by kglad.
Restart machine and then try to install again.
*** Make sure , you only delete these folders if there is no other adobe applications installed on the machine. As if you have any other Adobe application of the suite ( not free applications ) then it will be a problem. -
Having trouble in running a unix command and getting the output
Hi,
I am trying to run a unix command from within the java code. I am not able to make it work. I am enclosing the code and the error message that I am getting. Any help is highly appreciated.
import java.io.*;
public class RunCommand {
public static void main(String args[]) {
String s = null;
try {
Process p = Runtime.getRuntime().exec("cat UNIX_ASCII_TEXT_FILE | A_UNIX_PROGRAM -d");
BufferedReader stdInput = new BufferedReader(new InputStreamReader(p.getInputStream()));
BufferedReader stdError = new BufferedReader(new InputStreamReader(p.getErrorStream()));
// read the output from the command
System.out.println("Here is the standard output of the command:\n");
while ((s = stdInput.readLine()) != null) {
System.out.println(s);
// read any errors from the attempted command
System.out.println("Here is the standard error of the command (if any):\n");
while ((s = stdError.readLine()) != null) {
System.out.println(s);
System.exit(0);
catch (IOException e) {
System.out.println("exception happened - here's what I know: ");
e.printStackTrace();
System.exit(-1);
}The error message that I am getting is
Here is the standard output of the command:
SLu|%%$$=
Here is the standard error of the command (if any):
cat: cannot open |
cat: cannot open A_UNIX_PROGRAM
cat: cannot open -dLooks like the cat command is working and not the pipe command and the command after the pipe. But when I run the UNIX command from the command prompt I get the expected result.You might read this article and see if its approach works.
http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html -
Downloaded Safari 6.0.4 and my software is not up to date to run it. I can not get the old version of Safari to work again.
Open > About this Mac, and tell us what OS X version you have. If it's 10.8, reinstall OS X 10.8.3 > http://support.apple.com/kb/DL1640
If, after reinstalling the update, you still can't use Safari, hold Command and R keys while your computer is starting and reinstall Lion or Mountain Lion -
How to run commands like "ipconfig" and get the output in adobe AIR in windows?
import flash.desktop.NativeProcess;
import flash.desktop.NativeProcessStartupInfo;
if (NativeProcess.isSupported) {
var npsi:NativeProcessStartupInfo = new NativeProcessStartupInfo();
var processpath:File = File.applicationDirectory.resolvePath("MyApplication.whatever");
var process:NativeProcess = new NativeProcess();
npsi.executable = processpath;
process.start(npsi);
The above can only run a sub-application, but how to run an independent application(command) like ipconfig and get the result?Hi,
here is an example of running a net Use command line from AIR, unig the new NativeProcess. Hope it will help !
function launchProcess()
var file = air.File.applicationDirectory;
// set command path
file = file.resolvePath("C:/Windows/system32/net.exe");
var nativeProcessStartupInfo = new air.NativeProcessStartupInfo();
nativeProcessStartupInfo.executable = file;
// prepare command parameters
var args = new runtime.Vector["<String>"]();
args.push('USE');
args.push('W:');
args.push('/delete');
args.push('/y');
// set arguments
nativeProcessStartupInfo.arguments = args;
// add listeners to catch command outputs
process.addEventListener(air.ProgressEvent.STANDARD_OUTPUT_DATA, onOutputData);
process.addEventListener(air.ProgressEvent.STANDARD_ERROR_DATA, onErrorData);
process.addEventListener(air.NativeProcessExitEvent.EXIT, onExit);
// create and run Native process
process = new air.NativeProcess();
process.start(nativeProcessStartupInfo);
function onOutputData(ProgressEvent)
var processResults = process.standardOutput.readUTFBytes(process.standardOutput.bytesAvailable);
air.trace("Results: \n" + processResults);
function onErrorData(ProgressEvent)
var processResults = process.standardError.readUTFBytes(process.standardError.bytesAvailable);
if(processResults.search('password') > -1){
window.alert('Bad password');
air.trace("Errors: \n" + processResults);
function onExit(NativeProcessExitEvent)
air.trace("Process ended with code: " + NativeProcessExitEvent.exitCode); -
Whenever I run Firfox 4.0, my computer fan runs continuously. I have disabled all Firefox plug-ins, but I get the same result. This did not happen with Firefox 3.x, and it doesn't happen with IE 8.0. Any ideas?
I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6. -
I have Photoshop CS5 Extended and it says updates available but when i download the updates it says updates failed please try again later, i have tried a few times and get the same message any help would be great i am running 64bit on windows 8.
I am running Windows 7 64 bit ultimate and have the same problem. My hard drive crashed, installed a new one and then reinstalled CS5 extended. Installation went fine, but can no longer open my camera RAW files from Photoshop (camera is a Canon EOS T2i. The message also tells me I am not eligible for the update. I am... and I cannot open my files and I could before. I can find nowhere to contact Adobe to tell me how to proceed. My daughter is all a registered user of the same product and she had no problems upgrading... we purchased ours each at the same time. I do know the difference is that I had to reinstall and she did not. If that means anything.
-
Help please, I have an old iMac running OS X 10.2.8 and lost internet capabilities, how do I update and get the internet back?
Was it connected to the internet before, and if so how?
-
To upload the ZIP file and get the filenames available in ZIP file in ABAP
Hi Experts,
For my requirement, file from legacy comes as ZIP file with number of files in that.
Please provide one code sample to upload the ZIP file from local workstation and get the filenames available in ZIP file to check few filename validation checks for the available files in report program.
Thanks in Advance,
Regards,
Basani1. Copy the ZIP file into App server
2. Call function
call function 'RFC_REMOTE_PIPE'
destination 'SERVER_EXEC'
exporting
command = command " Unzip command gunzip /path & file
read = 'X'
tables
pipedata = std_lines
then you can read the files and can validate the file names
a® -
Bind Variable in SELECT statement and get the value in PL/SQL block
Hi All,
I would like pass bind variable in SELECT statement and get the value of the column in Dynamic SQL
Please seee below
I want to get the below value
Expected result:
select distinct empno ,pr.dept from emp pr, dept ps where ps.dept like '%IT' and pr.empno =100
100, HR
select distinct ename ,pr.dept from emp pr, dept ps where ps.dept like '%IT' and pr.empno =100
TEST, HR
select distinct loc ,pr.dept from emp pr, dept ps where ps.dept like '%IT' and pr.empno =100
NYC, HR
Using the below block I am getting column names only not the value of the column. I need to pass that value(TEST,NYC..) into l_col_val variable
Please suggest
----- TABLE LIST
CREATE TABLE EMP(
EMPNO NUMBER,
ENAME VARCHAR2(255),
DEPT VARCHAR2(255),
LOC VARCHAR2(255)
INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (100,'TEST','HR','NYC');
INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (200,'TEST1','IT','NYC');
INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (300,'TEST2','MR','NYC');
INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (400,'TEST3','HR','DTR');
INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (500,'TEST4','HR','DAL');
INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (600,'TEST5','IT','ATL');
INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (700,'TEST6','IT','BOS');
INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (800,'TEST7','HR','NYC');
COMMIT;
CREATE TABLE COLUMNAMES(
COLUMNAME VARCHAR2(255)
INSERT INTO COLUMNAMES(COLUMNAME) VALUES ('EMPNO');
INSERT INTO COLUMNAMES(COLUMNAME) VALUES ('ENAME');
INSERT INTO COLUMNAMES(COLUMNAME) VALUES ('DEPT');
INSERT INTO COLUMNAMES(COLUMNAME) VALUES ('LOC');
COMMIT;
CREATE TABLE DEPT(
DEPT VARCHAR2(255),
DNAME VARCHAR2(255)
INSERT INTO DEPT(DEPT,DNAME) VALUES ('IT','INFORMATION TECH');
INSERT INTO DEPT(DEPT,DNAME) VALUES ('HR','HUMAN RESOURCE');
INSERT INTO DEPT(DEPT,DNAME) VALUES ('MR','MARKETING');
INSERT INTO DEPT(DEPT,DNAME) VALUES ('IT','INFORMATION TECH');
COMMIT;
PL/SQL BLOCK
DECLARE
TYPE EMPCurTyp IS REF CURSOR;
v_EMP_cursor EMPCurTyp;
l_col_val EMP.ENAME%type;
l_ENAME_val EMP.ENAME%type;
l_col_ddl varchar2(4000);
l_col_name varchar2(60);
l_tab_name varchar2(60);
l_empno number ;
b_l_col_name VARCHAR2(255);
b_l_empno NUMBER;
begin
for rec00 in (
select EMPNO aa from EMP
loop
l_empno := rec00.aa;
for rec in (select COLUMNAME as column_name from columnames
loop
l_col_name := rec.column_name;
begin
l_col_val :=null;
l_col_ddl := 'select distinct :b_l_col_name ,pr.dept ' ||' from emp pr, dept ps where ps.dept like ''%IT'' '||' and pr.empno =:b_l_empno';
dbms_output.put_line('DDL ...'||l_col_ddl);
OPEN v_EMP_cursor FOR l_col_ddl USING l_col_name, l_empno;
LOOP
l_col_val :=null;
FETCH v_EMP_cursor INTO l_col_val,l_ename_val;
EXIT WHEN v_EMP_cursor%NOTFOUND;
dbms_output.put_line('l_col_name='||l_col_name ||' empno ='||l_empno);
END LOOP;
CLOSE v_EMP_cursor;
END;
END LOOP;
END LOOP;
END;user1758353 wrote:
Thanks Billy, Would you be able to suggest any other faster method to load the data into table. Thanks,
As Mark responded - it all depends on the actual data to load, structure and source/origin. On my busiest database, I am loading on average 30,000 rows every second from data in external files.
However, the data structures are just that - structured. Logical.
Having a data structure with 100's of fields (columns in a SQL table), raise all kinds of questions about how sane that structure is, and what impact it will have on a physical data model implementation.
There is a gross misunderstanding by many when it comes to performance and scalability. The prime factor that determines performance is not how well you code, what tools/language you use, the h/w your c ode runs on, or anything like that. The prime factor that determines perform is the design of the data model - as it determines the complexity/ease to use the data model, and the amount of I/O (the slowest of all db operations) needed to effectively use the data model.
Maybe you are looking for
-
Problem Connecting with SAP R3 for creating new model
Hi, i have a problem with connecting to the SAP R/3 when i want to create a new model with BAPIs. The error is: Internal Error has occured. Plugin name: Web Dynpro Model Editor Services Method: next Pressed Message: Internal error - see detail inform
-
Making a movie in 100% mode....
I need some help please, I want to have my movie at 100% so it sizes to the viewers screen. However, I dont want it to go any bigger than the actually movie size itself. My images start to pixelate. How can I avoid this without making my images bigge
-
Safe to add a credit card to my i pad 2
Is it ok to add a CC to my I pad or do I need to down load protrction?
-
Using WHEN-LIST-CHANGED on T-list to navigate block records
I have a form on which I use a T-List to list all of the child records in a block based on the selected parent record of the form. I am using the T-List almost strictly for navigational purposes (and eventually later for delete purposes as well). Abo
-
Pricing Error on CRM 5.0
When I enter a product number in Sales or Quotations I got the following error. Pricing error: Mandatory condition 0TTE is missing Checked Note 844575 but it didn't help. Anyone can help?