Back date change problem in run result

Dear Experts,
Navigate:
Work Structure>Organization>Description
i implement organization structure Jan 2010 in R12 HRMS Global . now change appear in organization structure effective date Jan2011. but this change not done till date in system. i date track to 01-Jan-2011 and create new organization structure (Work Structure>Organization>Description) & attach to employees assignments by opening all old pay periods (Payroll>Description) from jan 11 to aug 11. now when i run payroll the run result cannot match our hard copies payslip tht ws run in jan 11.(before change of organization structure)
i am new dont know if the above way is rite or wrong?
i confuse ...not kno what is cause?
plz help urgently!
Edited by: 890115 on Oct 21, 2011 3:44 AM

You will have to explain the steps properly -
What is it that you want to achieve ?
What is it that you have done, so far ?
Unless others in the forum understand what you want to convey, it is really difficult to expect responses.
So, help others to help you :)
cheers,
VB

Similar Messages

ORDERS05 IDOC - ZTERM "Critical credit data changed" problem

Hello everyone!
I have configured a scenario where XI sends an IDOC (ORDERS.ORDERS05) to an SAP system to create a Sales Order (SO).
I have a problem with the Payment Terms (...EDI_DC40/ZTERM) field. Whenever I send an SO with the ZTERM field mapped, I get an error "Critical credit data changed" and as a result, the SO is not created; however, when I leave the field blank, the message goes through successfully.
Apparently, a popup saying "Critical credit data changed" shows even when creating SOs manually. My question is this, is there any way I can bypass this message through XI, so that I can create the SO with the ZTERM field populated? Are there any qualifiers I should be looking into?
Looking forward to your responses!
Warm regards,
Glenn

Hello Anil,
Thank you very much for your reply! Unfortunately, that configuration is part of the auto credit checking. When I create SOs manually and change the payment terms field, a popup says "Critical credit data changed", I can simply tick the 'check' mark and the SO saves. However, if the SO is sent via XI, the popup causes an error. Is there any information we can provide in the IDOC so that it bypasses those kinds of popup messages?

Date change problem on 6110 Navigator

Hi,
On Sat morning I noticed my phone had not changed date and still showed Fridays date, yet the time was correct. I changed the date to Sat, and again on Sunday I noticed the same thing - still showed Saturdays date. On Monday and other days of the week the date changes correctly to the next day.
I tried setting the clock to 23h59 on Friday and watched the date change to Saturday correctly. I also tried this with the phone off and it was correct. Yet if I leave it to run its course there is a problem.
Can't find any help with this on the net and hoping someone else has experienced this and knows how to fix it. I have the latest firmware for this phone.

Mine is set to off and always has been. I don't know if my network actually broadcasts time / date for update anyway.
Either way the phone is OFF when the date change is supposed to happen so cannot get incorrect time from network.
I have also tested with the phone off. i.e. Set time to 23h59 on Friday, switched off phone and when I switched it back on again the date was correct. Don't know what the difference is between this and just leaving it to run as normal. Its all too weird.

Batch date change problem in iPhoto

I have hundreds of printed photos I scanned in 2009. Even though they were taken over three decades iPhoto thinks they were all taken in 2009. I separated them into years, numbered them, and put them in folders which became events. I tried using batch date change -- the first one in the event is OK, but the others changed all different. Example: I changed picture one, in event folder "1999" from 3/5/2009 to 1/1/1999. All of the rest of the pictures changed to the same time difference that they were when I scanned them. I didn't scan them all in chronological order, so that doesn't help at all. Do I have to manually change each of my 9000 photos? This is a problem when I try to show a chronological slide show on Apple TV.

Scanned photos do not have an EXIF Capture Date field in the file like photos taken with a digital camera do. Therefore iPhoto uses the file created date or import date for those photos.
You will have to group all 1999 photos into an album, arrange them in the order you want and then use the Photos ➙ Batch Change ➙ Date menu option and add a 1 minute or so between photos.
Then do the same for the next year's photos.
OT

BADI n-step SC approval - Approval Index and Data Change Problems

Dear forum gurus,
We are implementing SRM 5.0 (SRM SERVER 5.5 SP 9) in Extended classic. I am developing the BADI's to use the n-step SC approval workflow WS14000133.
Our approval process is as follows:
1. Cost Centre approver (based on CC with the largest value in the SC)
2. Financial approver (based on the total value of the SC)
I have done this now and it works as long as every step is approved!
I have implemented the BADI 'BBP_WFL_EMPL_WI_BADI' - method 'CHECK_REQUESTER_WI' to send back any changes to the cost centre to the shopper to review. The standard also sends back total value changes to the shopper in the same way.
My problem is that if the main CC or the total value of the SC are changed, the logic goes back to the shopper and then if the shopper 'Accepts changes', the logic skips the first apporver again and goes directly to the second (financial approver).
I think there are 2 options:
1. After the shopper accepts chnages, to restart the WF so a new WF template is generated. Then my logic will show the new CC and FI approvers again.
2. I change my logic in the 'GET_REMAING_APPROVERS' method so the apporval index is not assumed to be 1 or 2 only. I guess I will have to work with logic to read the history and apporval index, but this seems very complex.
Option 1 - I can't get this to work. After the shopper accepts changes I can't get the WF to restart in the 'BBP_WFL_SECUR_BADI'.
Has anyone fixed this?
Option 2 - The logic for checking apporval index and apporval history tables seems to me very complex. Has anyone done this and can they explain the logic to me if so? The problem here is that the sample code for this BADI assumes the approval indexis always 1 for the first step and 2 for the second step, but this is not the case!
Thanks in advance,
Best regards,
Nick

Hi,
I feel setting the parameter BBP_WFL_SECURITY for the Approver should do the trick.i.e. Restart the workflow adn the same approval process should be followed again.So plese adjust the value of this parameter for the Approver role in trascn PFCG.Also if you want to overwrite the settings of this paramtere(as maintained in PFCG),you can implement the BADI "BBP_WFL_SECUR_BADI".
For more info,refer the foll links:
http://help.sap.com/saphelp_srm50/helpdata/en/37/830b3b7e7ef74de10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/f7/a6a3415e34b05fe10000000a1550b0/frameset.htm
BR,
Disha.
<b>Pls reward points for useful answers.</b>

HCM Master Data Loan repayments date change after payroll run

I am facing a challenge in a case in which the car loan has been posted in the month of Dec’13 and payroll have been executed till Feb’14.
Now, the employee has taken relevant approvals for getting the car loan moved from Dec’13 to Nov’13 loan payment and this will also result in change in the end date of the loan.
Is there any option/possibility in SAP that we can change the start and end date of an employee who has taken Loan keeping in mind that the payrolls have been executed.
Hope it clarifies my problem if this still need to be explain further, please let me know.

Hi Sonu16,
The Query is not very clear to me.
I think u want to change the date of joining after the payroll run along with position. If that is the case then u can do it.
Please followw the given steps :-
1) Go to PU03 for Payroll Status and delete all the dates, before doing it take a snapshot of the PU03. So that after changing it u can revert back to what it was.
2) Go to PA41, move to HIRING action and u'll get BEGDA in modifiable mode, then change it. Save it. But the noticeable thing is that ur present Position shud have a creation date well before ur new HIRING date otherwise u won't be allowed to change.
3) Thinking u have changed the date in Step #2, then go to SE16 and select PA0001, go to debugger mode and change the POSITION id. save it and come out and refresh it. Changes will be updated.
Hope this solves the purpose.
Regards,
ARNAV...

IPhoto Time/Date Change problem

There is one particular event in my iPhoto program that registered the wrong date when downloaded. In trying to change it, the program automatically sets the date about 130 years earlier, regardless of what date I type in. It only happens with this one file. I have had to change others and they have worked fine. Does anyone know how I can fix this problem? After repeated attempts, I'm back to the 1600s!

How are you trying to change the date? iPhoto has two methods - "Photos > Adjust Date and Time" and "Photos > Batch Change > Set Date and Time".
If you not yet have tried "Batch Change", try if that will help, if you use the option "Modify Original File".
Only "Batch Change" will set all selected photos to the same date and time, with an optional increment. So you to correct the images in groups of photos taken at the same time.
Regards
Léonie

Deferred task date change problem

Hi,
Every user in IDM has a deferred task as shown below. The requirement is to change the 'Date' value to set the time as 23:59:59.00Z.
At the moment different users have different times set for them. All need to be same as mentioned above. Please assist me in this with a faster way as there are more than 5K users.
<Object name='WF - Expire Contractor'>
<Attribute name='authorized' value='true'/>
<Attribute name='date'>
<Date>2011-04-14T06:00:00.000Z</Date>
</Attribute>
<Attribute name='executeOnce' value='true'/>
<Attribute name='owner' value='C670635'/>
<Attribute name='subject' value='ProxyAdmin'/>
<Attribute name='task' value='WF - Expire Contractor'/>
</Object>
Thanks,
Santoshanand

A code in xpress would be of great help.But much more lines of code :-(
I am not sure if we have any already existing java or need to write
a new one. So, I think writing a custom workflow will be a good way.I avoid writing XPRESS code unless it is absolutely necessary, so here I cannot help you :-( I think a
stand-alone Java program of ~20 lines would complete your task.
Also, task.setStartDate(<the date>); requires a date object. Problem
here is to set the time to 23:59 for the same date.
(new SimpleDateFormat("yyyy-MM-dd hh:mm")).parse("2011-04-14 23:59", new ParsePosition(0));

Scedule lines data change after MRP run

I generates a schedule lines when I run the MRP for certains articles. When I run again MRP, It modifies the data's of schedule line (quantity per ex) even thoough I have already transmetted the request (schedule lines) to the vendor.
How to prevent to make changes in the schedule line once I sent the info to the vendor. Instead I would like that the MRP creates new schedule line.
Than you for any help.
Ahmed.

Hi Ahmed,
In MRP-4 view have you maintained 1 or 2 for Indv. / Coll indicator?
Regards,
Vivek

Date change problem in Calendar object

Hi i have a calendar object for date representation.
When i need to go ahead a day i use a add method that adds a day to the Calendar object, and if the date is out of range it adjustes proerly to the next montha and proper date in that next month.
But it fails for 2 instances in a year.
From May to June and From October to November.
This i think is happenning because of the Daylight saving times in the May and October.
I try to go from May to June but it never does on it's own !! Do i have to explicitly check that for those 2 months or there is any other method ?
How can i get over it ??
Please help me with this.
Shailendra

Hi
There may be some other reason for it, coz Day light savings starts in last week of March, not in May.
And day light savings ends in Last week of October
Suresh

Documents "Modifed Date" changes just by opening?

We're seeing that Word, Excel & various other doc's change their "Date Modified" to today's date where they are ONLY opened...not modified.
All we're doing is opening and closing, no changes....
Is this a Micro$oft issue or can I change a preference somewhere??
many thanks

After seeing that the date-change problem seems to happen when you look at a document to which you have group access, but you aren't the owner of it, I just tried marking a similar document "read-only" using the Workgroup manager, then I went back to my desktop machine, opened it in Word, closed it again, responded 'no' to the dialog question about saving, and this time the date didn't change - and there was no MS Word error message..
I'm haven't tested what happens if you try to do the same in finder from a client machine -- of course, usng Work Group manager that way is not really a practical solution.
Also I'm going to see if the problem happens with a non MS Office application.

Problem writing meta data changes in xmp in spite of enabled settings

Dear Adobe Community
After struggling with this for two full days and one night, you are my last hope before I give up and migrate to Aperture instead.
I am having problems with Lightroom 5 writing meta data changes into xmp and including development settings in JPEG, inspite of having ticked all three boxed in catalog settings.
In spite of having checked all boxes, Lightroom refused to actually perform the actions. I allowed the save action to take a lot longer than the saving indicator showed was needed, but regardless of this no edits made in the photo would be visible outside Lightroom. I also tried unticking and ticking and restarting my compute.
Therefore, I uninstalled the program and the reinstalled it again (the trial version both times). I added about 5000 images to Lightroom (i.e. referenced). After having made a couple of changes for one photo in development settings, I tried closing the program. However, then this message was then displayed:
I left the program open and running for about 5-5 hours, then tried closing the program, but the message still came up so I closed the program and restarted the computer. I tried making changes to another photo, saving and then closing and the same message comes up. The program also becomes unresponsive, and of course still no meta data has been saved to the photo, i.e. when opening it outside Lightroom, the edits of the photos is not shown.
What do do? I would greatly appreciate any insights, since I have now completely hit the wall.
Oh yes, that´s right:
What version of Lightroom? Include the minor version number (e.g., Lighroom 4 with the 4.1 update).
Lightroom 5.3
Have you installed the recent updates? (If not, you should. They fix a lot of problems.)
I installed the program two days ago and then for the second time today.
What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
Mozilla/5.0 (Macintosh; Intel Mac OS X 10_8_5) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/31.0.1650.63 Safari/537.36
What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
JPEG
If you are getting error message(s), what is the full text of the error message(s)?
Please see screen dumps above
What were you doing when the problem occurred?
Trying to save metadata + trying to open images that it seemed I had saved meta data to
Has this ever worked before?
No
What other software are you running?
For some time Chrome, Firefox, Itunes. Then I closed all other software.
Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
4 GB 1333 MHz DDR3
Has this ever worked before? If so, do you recall any changes you made to Lightroom, such as adding Plug-ins, presets, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers, or installing/uninstalling any programs?
No, the problems have been there all the time.

AnnaK wrote:
Hi Rob
I think you succeeded in partly convincing me. : ) I think I will go for a non-destrucitve program like LR when I am back in Sweden, but will opt for a destructive one for now. Unfortuntately, I have an Olypmus- so judging from your comment NX2 might not be for me.
Hi AnnaK (see below).
AnnaK wrote:
My old snaps are JPEG, but I recently upgraded to an Olympus e-pl5 and will notw (edited by RC) start shooting RAW.
Note: I edited your statement: I assume you meant now instead of not.
If you start shooting raw, then you're gonna need a raw processor, regardless of what the next step in the process will be. And there are none better for this purpose than Lightroom, in my opinion. As has been said, you can export those back to Lightroom as jpeg then delete the raws, if storage is a major issue, or convert to Lossy DNG. Both of those options assume you're willing to adopt a non-destructive workflow, from there on out anyway (not an absolute requirement, but probably makes the most sense). It's generally a bad idea to edit a jpeg then resave it as a jpeg, because quality gets progressively worse every time you do that. Still, it's what I (and everybody else) did for years before Lightroom, and if you want to adopt such a workflow then yeah: you'll need a destructive editor that you like (or as I said, you can continue to use Lightroom in that fashion, by exporting new jpegs and deleting originals - really? that's how you want to go???). Reminder: NX2 works great on jpegs, and so is still very much a candidate in my mind - my biggest reservation in recommending it is uncertainty of it's future (it's kinda in limbo right now).
AnnaK wrote:
Rob Cole wrote:
There is a plugin which will automatically delete originals upon export, but relying on plugins makes for additional complication too.
Which plugin is this?
Exportant (the option is invisible by default, but can be made visible by editing a text config file). To be clear: I do not recommend using Exportant for this purpose until after you've got everything else setup and functioning, and even then it would be worth reconsidering.
AnnaK wrote:
Rob Cole wrote:
What I do is auto-publish to all consumption destinations after each round of edits, but that takes more space.
How do you do this?
Via Publish Services.
PS - I also use features in 'Publish Service Assistant' and 'Change Manager' plugins (for complete automation), but most people just select publish collections and/or sets and click 'Publish' - if you only have a few collections/services it's convenient enough.
AnnaK wrote:
Would you happen to have any tips on which plugins I may want to use together with Photoshop Elements?
No - sorry, maybe somebody else does.
Did I get 'em all?
Rob

How to reflect data changes back to the external XML

Hi,
In one of my application,
I use data for (any of) my Flex component from an external XML (thru a HTTPService) request & a Java backend function provides the XML data.
I bind the HTTPService result to XMLListCollection & I supply this data for the dataprovider for my component.
So, if I make any data changes (by adding / creating new items ) in the component, it will be reflected in the XMLListCollection (resulting in adding / modifying new nodes)
My Question is how to make these data changes reflect back in the external XML?
- Sen

Well not necessarily. While binding directly to the service in view is fast is
also not very clean and reusable. Try to put your data inside model classes,
view binds to those classes instead of the service. Also use a custom class to
wrap your service and that gives you flexibility to change server properties or
make 2 different calls with the same service. You need to write code yourself
but in the end it will be easier to adjust changes. So when you load data you
actually populate the model instead of bringing data straight to the view. This
code usually gets executed inside a command class. So to be more specific:
CustomService
- var HTTPService
function getData
-- in here you have the service calling the get data method on the service
function setData
-- in here you have the service calling the save data on the server
View
var model:DataModel
- controls binds to the model and display data from model
- when click on save or whatever gesture you use for saving you dispatch an
event with the new data.
You should use some MVC framework to do this for you..
When event is dispatched the framework will create a command class instance and
run it ...
GetSaveCommand
- var service:CustomService
service.saveData(event.Data)
service.getData()
function result()
function fault() - for the success or fault of the service call ...
you can perform additional data transformation here id needed or employ the use
of other class to do that if necessary ...
Hope this makes sense. It is more work involved as you can see.
Or you can go with 2 HTTPService instance in the view ...
C

Is anyone else having problems with an iPhone 6 delivery date changing on them?

I sat up until 12:01am to pre order (2) iPhone 6's and (2) iPhone 6 +'s and they had a delivery date of 9/19 for both of the phones at the time I logged on to Verizon's preorder site. The system would not allow me to log in as an existing customer but it would allow me to order as a new customer. I kept trying to order new phones as an existing customer on two different computers and three different browsers without any luck. I finally decided to order them as a new customer and the order went right through the Verizon system without any problem. Two minutes later I received an email from Verizon requesting that I call them as soon as possible to complete the order. I called in and spoke to a rep that explained that I already was an existing customer and that I would need to use the "Existing Customer" preorder link. I explained the issues I was having and she said that I would still need to use that system when it was available. So I tried the existing customer link and it now let me through but the date for the iPhone 6 plus had slipped to 10/7 (It is now 1:30 am). I completed the transaction and it stated 9/19 delivery for iPhone 6 and 10/7 for the iPhone Plus. However once I received the email confirmation it stated that the delivery date for the phones was 10/7. I called Verizon customer service and stated my concern about the later delivery date for the iPhone 6 and they told me that the iPhone 6's would arrive on the 19th and the pluses would arrive on 10/7 so I did not change my order. This morning 9/19 8:00am I called in to inquire about my shipping confirmation numbers for the (2) iPhone 6's and the customer service rep (Robanya) told me that he would call me back at 1:00pm PST and give me the shipping confirmation numbers. He asked specifically which phone number he should call me back on and I gave him my cell number. After not receiving a call back from Robanya, I called Verizon customer service at 5:30pm and spoke Ryan James and he confirmed that the orders were placed on the 12th of Sept and that one system showed all of them due to be delivered 10/7. After insisting that Robanya that I spoke with earlier in the day said they were shipping today, Ryan got off the phone for 5-10 mins and then got back on and said that the iPhone 6's shipped yesterday on the 18th but he did not have a confirmation number. After pressing him that someone should have this confirmation number in Verizon he stated that the delivery dates were subject to change and that all the phones would probably ship on 10/7 and left it at that.
So after loosing sleep to pre order phones on Verizon, speaking with (3) different Verizon reps, I am rewarded by having my delivery date changed to 10/7 on my iPhone 6's which is the same delivery date they were quoting yesterday 9/18.
Did any one else have the same disappointing experience that I had?

Yes, pre-ordered iPhone 6 with a guaranteed delivery date of 19 September; took screen shots after the order just to have record of it.
Called Verizon 18 Sept because I hadn't received a tracking number yet, and was informed my phone would now ship 7 October. When I expressed that was different than what was promised and had proof, a manager came on the phone and confirmed that I should have a 19 Sept delivery date based on their records. She told me however she could not confirm when my order would ship.
19 Sept came and went with no phone delivery. I have tried calling Verizon, posting here, and posting on their FB page for customer service. Every rep I talked to (except for the first manager on 18 Sept) has been unable to admit that they mislabeled their product sales page, and mislead the customer. One rep told me the guaranteed delivery date was an "estimate"; when I asked her to show me on the website where it uses the term "estimate", she admitted it didn't communicate that, but still was unable to utter the words "we made a mistake".
VZW needs to take a 101 class in customer service and crises management; rule #1 is if you screw up, admit it! I know I am not going to get my iPhone as promised, but pretending like there is nothing wrong with that customer service experience is just making things worse. Not a single employee I have communicated with to date has attempted to do anything proactive to correct or mitigate the customer failure. I am truly amazed at how poorly VZW has been handling this to date; again (removed) happens with supply/demand, website errors, etc, but the failure to acknowledge how the screw up shafted a lot of (formally) loyal long time customers is criminal.
>> Edited to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator

Office Telemetry Agent Last Run Result 0x800700005 and machines not reporting back in the Telemetry Dashboard

We have had the Office Telemetry Dashboard setup for a while now as part of our Office 2013 evaluation and it currently reports back on 117 Computers which roughly matches up with the number of agents we have deployed. However, I have recently discovered
that some computers do not show up on the dashboard when searching under either their computer name or username. Having looked locally at these machines they report a Last Run Result code of 0x800700005 on the Task Scheduler. Not exactly sure what this
means as I know its a fairly generic code. I can run the telemetry dashboard locally on the effected machines and all appears ok. I have looked at the main Telemetry Processor Log file on our server (%windows%\ServiceProfiles\NetworkService\AppData\Local\Temp\dperrorlog.txt)
and can see there are quite a few machines reporting that Office Telemetry Processor deleted the folder \\ServerName\SharedFolderName\ComputerNameReference because the files in the folder haven't been uploaded for more than 2 hours. I tried googling this error
but got nothing back.
The machines in question are running Windows 7 Enterprise SP1, Office 2013 and the telemetry agent is configured through Group Policy. We also have a number of Office 2007 clients
running the agent but I have not yet checked to see if any of these ones are not reporting back.
Can anyone help troubleshoot this issue further to try and establish why some machines are not showing up in the dashboard logs. I have gone through the troubleshooting info here http://technet.microsoft.com/en-us/library/jj219431.aspx#tshooting
but so far can't find a solution.
Thanks.

I tried running the agent as admin and it returned a last run result of 0x41301 which I believe means the Task is currently running but its been like this for several days with nothing being reported back yet.
For all the other agents that appear to be running fine they show up on the dashboard with each non-admin username which is what we need to run reports based on individual users so I cant understand why this would be a permissions problem. The permissions
on the shared folder were setup using the automated option when installing the telemetry processor on the server. I have tried just adding in one of the problem users to have full control to see if this makes a difference but have not tested this yet.
Anyone have any tips on troubleshooting the DPErrorLog file? There doesn't appear to be much out there in the way of documentation for this stuff. Is anyone else using the Telemetry Dashboard successfully as part of their Office 2013 evaluation?
Thanks.

Back date change problem in run result

Similar Messages

Maybe you are looking for