Output type not proposed in Message Control when PO is created

Hi,
DETAILS
I have set up the system to send a IDOC when a PO is created. I have done the following settings in the system to send the IDOC using the message control functionality in the PO creation screen.
1). Created a new output type ZNEU which is an exact copy of NEU output type provided by the SAP system.
2). Assigned the new output type to the output determination procedure.
3). Enabled the new output type ZNEU for ALE distribution.
4). Maintained the condition records in the system for the output type ZNEU such that for the P org, endor and Docmuent type combination the output shall be proposed.
5). Maintained a partner profile( Logical System ) and assigned the output type ZNEU to this partner profile.
6). Created a Distribution model for Sender ~ Receiver for ORDERS message type.
PROBLEM
When i create a PO the new output type is not getting proposed by the system. I am not sure why it is not getting porposed in the message control.
I tried to manually enter the ZNEU output type in the system to see if the system is accepting. I am getting an error
Partner % does not exist for partner function LS
Any idea what i am missing? Am i missing any configuration or am i doing something wrong?
cheers

The output is not being proposed automatically is becuase you are missing "Condition Records" for the output type ZNEU.
Go to NACE.
Select EF - Purchase Order
Select "Condition Records"
Select ZNEU and select condition records
Now, system will bring the combinations of access sequence. Maintain appopriate record.
This will enable you to get the output type automatically in the purchase order.
Regards,
Naimesh Patel

Similar Messages

Why are not pop up message window when message type I and W

Hi All,
I am working in BADI ( me_purchdoc_posted~posted) for t-code ME21N. Actually i want show material number, material description and ABC indicator of material at saving point of PO if material is significant.
code is properly working but does not showing error message window when I am using message type I (information) or W (worming message) .
if i am using message type E ( error message )then showing message window just link Information message.
So i can no understand why are not message window pop up when i take message type I and W.
my code is that
method IF_EX_ME_PURCHDOC_POSTED~POSTED
IF SY-TCODE EQ 'ME21N' OR SY-TCODE EQ'ME21'.
DATA : wa LIKE LINE OF IM_EKPO.
DATA : VAR_MAKTX TYPE MAKT-MAKTX.
DATA : VAR_MAABC TYPE MARC-MAABC.
DATA : P TYPE STRING.
DATA : P1 TYPE STRING.
LOOP AT IM_EKPO INTO wa.
    SELECT SINGLE MAABC FROM MARC INTO VAR_MAABC WHERE matnr EQ wa-matnr AND werks EQ wa-werks.
    SELECT SINGLE MAKTX FROM MAKT INTO VAR_MAKTX WHERE matnr EQ wa-matnr. " AND werks EQ wa-werks.
      IF VAR_MAABC EQ 'A'.
        P = 'is significant material'.
        CONCATENATE WA-MATNR '(' VAR_MAKTX ')' P INTO P1.
        MESSAGE P1 TYPE 'E'.
        EXIT.
        ENDIF.
ENDLOOP.
ENDIF.
endmethod.
guide me...............

Hi vinod,
thanks for reply......
yes, my requirement is to show the popup window with material number, material description and ABC indicator of material at saving point of PO if material is significant.
I find Badi to transaction me21n at saving PO. Badi ME_PROCESS_PO_CUST does not exist.
so i am using Badi me_purchdoc_posted~posted.
This Badi ( me_purchdoc_posted~posted ) is properly working But showing message "system error ( error in method po_post ) "
when I am click on OK then automatic leave from transaction.
guide me..........

SmartForm - Output could not be issued,Message no. VL086

Hi , i had create a smart form for the DO and it is working when i try to view it through the function. However, when i want to try it through issue the Delivery Output, system throw error , "Output could not be issued,Message no. VL086"
Please kindly advise.
thank you

Hi,
Pls check if it helps
VL086: Output cannot be issued
Siraj

Output could not be issued message whlie handling smartforms.

while executing the smartform i am getting Output could not be issued message and i am getting no display.
My functinal consultant had created new output type for VF03 tcode ( a copy of existing one), and i copied the same program and smartforms with slight modifications.
now while executing the output type through VF03 I am getting the abouve message.
and while checking there is no data in JOB_OUTPUT_INFO internal table of the smartform.
what will be the reason? and how to correct this.
<b>this is an urgent task.</b>

Hi,
This might be mostly becoz of due to data not getting passed to the Smartform.
First ensure that, you get the data in the internal table of the Driver program and then check the same in the SM...
So please check and let me know if the problem persists.
Thanks,
Vishnu.

Output could not be issued Message no. V1104

Hi Expert,
I have done output configuration properly for Zsalesorder and Zsmartform ,I can able to see print view in order but when I will give print then print is not coming and below error is coming
Output could not be issued Message no. V1104

Hi,
it seems there is no connection between printer and sap server.
Firstly send normal world doc from server to printer.
If normal world document is not printed in this case you should check connection.
Regards

Output type not triggered during Delivery Order - pls help

Hi,
Need some help.
I'm trying to setup output determination for delivery. It's a new output type for delivery.
There are some checking that I want to build in to determine whether the output type is to be generated. Therefore I have to make sure of requirement (routine). However, after putting in the configuration, coding the requirement and creating the condition record, the output type still cannot be generated. When I go to VL02N to check the Output Determination Analysis it says the requirement " " is not fulfilled. It's not even calling out the requirement number that I assigned in the access sequence.
Any idea what could be wrong?
This is what I've done :
1. Creating condition tables
2. Creating access sequence & assigning the condition tables to the access sequence
3. In the access sequence, assign requirement number 999. The "Exclusive" indicator is not ticked.
4. Ensure that the requirement 999 is activated in tcode VOFM.
5. Create output type, assign the access sequence to the condition type.
6. Assign the condition type to the output determination procedure. Make sure the "Manual" checkbox is not ticked.
7. Assign the delivery type to the output determination procedure.
8. Create condition record.
Note : when i created the condition record, I am not able to assign a Partner Function (for eg. SH) to the record. However in the config for the output type I've already configured for that Partner Function "SH" to be allowed for that output type.
Appreciate suggestions & feedback.
Thanks
Rgds,
L

Hi,
When I go to VL02N to check the Output Determination Analysis it says the requirement " " is not fulfilled. It's not even calling out the requirement number that I assigned in the access sequence.
This is because in requirement you put certain conditions should be fulfill then out put should trigered,
Example - if you maintained condition in requirement that user must maintain loading point
Now when creating delivery user not maintained loading point then output will not trigered, so user must maintain that then only it will trigered output.
Same problem just now solved, check which data maintenance conditions in routine and try to maintain that.
Kapil

My Photoshop elements 11 and 13 organizer suddenly exits. photoshop elements is not responding. Message occurs when the error is found. solicit help

My Photoshop elements 11 and 13 organizer suddenly exits. photoshop elements is not responding. Message occurs when the error is found. solicit help, That's all.

We really cannot know. So far you haven't told us anything about your system nor is there any feasible way to diagnose what this "missing file" could be, no matter what. That is, short of elaborate tracking and observation using specialised system diagnosis tools. The welcome screens can be brough back via the Help menu, but well, this might bring back the problems as well. Anyway, this is most likely nothing that a forum can help you with. If you know a computer geek, give him a call. Otherwise I don't see what we could do for you.
Mylenium

Table type not defined for table control "T_CONTROL" (Custom table)

Hi All,
I m facing a problem in ITS mobile service.
The Table control designed by me in R/3 (Module pool program) is
not getting displayed in ITS mobile page.
It is giving me an error "Table type not defined for table control "T_CONTROL" (Custom table) ".
Can you please let me how this issue can be resolved.
With Regards,
Mahesh

CONTROLS: table_ctr TYPE TABLEVIEW USING SCREEN '0010'.
try using this....
Regards
Vasu

Some output types are adding in messages when the changes are done

Hi Friends,
In PO, some output types(which are already there in display mode in messages) are adding in EDIT mode in messages when I change any thing in Purchase order(ME22N). Some outputs are not adding.
Example, i have created two output types (AAA and BBB) successfully in ME22n. Now i am changing some thing in PO and going to MESSAGES. Now I am seeing one extra output type AAA is added in MESSAGES with EDIT mode, But i am seeing output type BBB is in display mode and also not added extra.
Could you please tell me, what is the reason for this?
Thanks
Kumar

Hi Kumar,
Looks like your Question is not pertaining to SAP-MDM.
This forum is for SAP Master data management queries .
Kindly post your question in the right forum to get quick replies.
Hope It Helped
Thanks & Regards
Simona

IDoc output type not getting configured in IDoc-File scenario

Hello
I am having IDoc to file scenario where I want to post Delivery Document to legacy system. For this I have configured following EDI configuration for Delivery through NACE transaction
1] Created output type
2] Created partner function as EDI LS for this output type
3] Configured RSNASTED as Processing Routines for output type
4] Included this output type in the Header output procedure
5] Configured XI system as the partner in partner profile with appropriate Message control
Still when I attempt to include this output type in the Delivery it gives me "Output for partner could not be configured". The detail message says "In Customizing, the 'CannotBeChanged' indicator has been set for output type".
I checked in SPRO but could not find such flag.
Does anyone had came across such output type configuration.
Thanks in advance.
I know this question might be not appropriate in XI forum as it comes under EDI but it has become necessary for XI profs -:)
Regards
Rajeev

Hi,
Please check the following
1. Condition Table
SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
Copy NEU to ZNEU or YNEU
4. Message Determination Schemas
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type ZNEU or YNEU.
G.Ganesh Kumar

Output type not getting defaulted in PO

Hi.....
I have configured output type as printout for purchase order, i have set the default value for message type NEU, even than when i create a PO system is not picking the message type NEU..
i have also mainatined condition record in MN04 for the purc. document type..
any other setting need to be maintained....
Kindly suggest....
Regards
Sarfraz

Hi,
Please check the following
1. Condition Table
SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
Copy NEU to ZNEU or YNEU
4. Message Determination Schemas
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type ZNEU or YNEU.
G.Ganesh Kumar

Output Type not triggred at P.O creation but at Change

Dear All,
Iam experiencing a weird error inregards to defaulting of Output Type while P.O creation.
Here is the breif background:
1) We are maintaining Condition Table for a Custom Output Type with Key Combo - P-ORG/Doc.Type/Mat.Type/Plant
2) This output should trigger while P.O creation to send an IDOC to a third party system
3) All the necessary Profiles and partners are maintained for the Output type
4) The condition does not default when I first create the P.O but defaults when I come back and do any change and save it.
Has anybody experienced this before, this seems really weird to me, I tried finding Notes if any but could not.
Thanks in Advance.
Chand

Go to SPRO-MM-Purchasing-Messages-Outptu control-message types-define message type for PO
then select Fine-Tuned Control: Purchase Order
Here you have to maintain your output type with operation 1 which is for PO create and 2 is for change
I am sure in your case the output type is maintained only for 2

Output type not defaulting on PO?

Hi,
I am trying to get the NEU Output type (we use this output type used to send the PO to the vendor through email) to default onto the PO.
I have maintained all relevent customization, and master data:
1.     Output Type NEU defined with external send medium (5)
2.     Communication strategy CS01 defined
3.     Communication strategy assigned to output type NEU
4.     Condition record maintained in MN04 for order type / porg / pgroup using medium 5 (external send)
5.     E-mail address maintained in vendor master record
6.     E-mail address maintained in my user master record
When I create a PO, no output is automatically created. If you check the output determination analysis, it actually finds the condition record, but does not generate the output for some reason.
Diagnosis
A valid output condition has been found for the application object.
System response
An output proposal is created.
Procedure
Execute function
Any thoughts on why?
Cheers,

Hi MD Patel,
I tried assigning a form to the output type, however this doesn't make a difference.
The requirement I have here, is upon save of the PO, they want to send an internal email message to the PO creator / approver / requisition creator (ihat tells them the PO# that was created, vendor, the header details from the PO, etc.) WITHOUT the PDF PO form attachment. The way I decided to implement this was to configure a new output type for simple mail, and configure it to default onto the PO messages screen (however the defaulting is the piece that is not working). I then plan to add some custom logic to determine the recipient list for the email and send the email (e.g. if this output type is defaulted on the PO messages screen, then obtain PO creator, approver and Requisition creator's email addresses, populate the communication tab of the output message with these email addresses, and then upon save of the PO, the message would be sent to the users).
When I look at the message type determination analysis in the PO messages screen, it finds the output condition record.
Diagnosis
A valid output condition has been found for the application object.
System response
An output proposal is created.
Procedure
Execute function
However, there is also a message in the message determination analysis screen saying that there is no partner found for partner function MP
Condition type Message     Description
ZEMA     539                         No partner was found for Partner function MP
Could this be the cause? In my condition record, I have specified the "Dummy recipient for output" as I obviously cannot set it to a certain email address as the recipient needs to be determined uniquely for each PO.
Any thoughts?
Cheers,

Output type not trigerring Automatically for inbound delivery

Hi all
We have created a custom output type for Delivery idoc processing ZPOD copy of OPOD and maintained all the settings also condition record for the same has been maintained.
But when we are creating inbound delivery the output type ZPOD is not coming automatically.
In the Delivery document and in the Output screen i have checked Determine analysis for output(VL32N -> Enter IBD No -> Select menu option Extras -> Delivery output -> Header
Go to menu option GoTo -> Determin.Analysis.)
It is showing me ->Message 502-Output ignored (requirement 017 not fulfilled)
Can u please throw some light so that in output message determination the Output type should come automatically for Proof of delivery
Thanks and regards
shailesh

Um... I think the message is pretty clear on this - the reason is "requirement 017 not fulfilled".
Requirements for output control may be found in VOFM transaction, under Requirements -> Output control. 017 is the standard one, the description says 'POD on goods issue'. According to the comments, the output is not issued if "POD status is initial" or "No output, if no goods receipt".
Either correct the document or remove this requirement in output configuration, if it's not applicable.

Output type not showing automatically

Hi All,
I'm creating IDocs thru Message control for Purchase Order ME21N. When I create a PO, after filling all the heade and item details on the screen of ME21N for a particular vendor, I go to 'Messages' tab but can't find the output, medium, partner etc on that screen. I manually enter the details here and IDoc is created.
Earlier, this ouput detail was populating automatically but now It's not coming. I checked all settings in NACE, WE20 etc for that particular vendor but I couldn't find any clue.
Please help me. It's very urgent.

Hi,
Just check whether earlier condition records were maintained for the PO output type which you are using.
Condition records missing situation can create such problem.
Thanks.
Mark points if helpful

Output type not proposed in Message Control when PO is created

Similar Messages

Maybe you are looking for