Output type not getting defaulted in PO

Hi.....
I have configured output type as printout for purchase order, i have set the default value for message type NEU, even than when i create a PO system is not picking the message type NEU..
i have also mainatined condition record in MN04 for the purc. document type..
any other setting need to be maintained....
Kindly suggest....
Regards
Sarfraz

Hi,
Please check the following
1. Condition Table
SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
Copy NEU to ZNEU or YNEU
4. Message Determination Schemas
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type ZNEU or YNEU.
G.Ganesh Kumar

Similar Messages

  • Output type not getting saved in the PO

    Hello Team
    we are facing one issue where output type is not getting saved in the PO.
    we give one output type and than save it , after going back to the PO we see that it is not there.and no output issued
    the PO is released properly and there is no issue , any idea what could be the reason for it

    Hi,
    Check in SU3 t.code, did check box selected u201CDelete After Outputu201D in Spool Control segment in Default TAB
    Also check Partner Function VN maintained in Default values TAB in NACR--- > EF Application for your output type
    Cross check partners {VN, PI, GS) are assigned to your PO output type in Partner Roles per Message Type
    Regards,
    Biju K

  • IDoc output type not getting configured in IDoc-File scenario

    Hello
    I am having IDoc to file scenario where I want to post Delivery Document to legacy system. For this I have configured following EDI configuration for Delivery through NACE transaction
    1] Created output type
    2] Created partner function as EDI LS for this output type
    3] Configured RSNASTED as Processing Routines for output type
    4] Included this output type in the Header output procedure
    5] Configured XI system as the partner in partner profile with appropriate Message control
    Still when I attempt to include this output type in the Delivery it gives me "Output for partner could not be configured". The detail message says "In Customizing, the 'CannotBeChanged' indicator has been set for output type".
    I checked in SPRO but could not find such flag.
    Does anyone had came across such output type configuration.
    Thanks in advance.
    I know this question might be not appropriate in XI forum as it comes under EDI but it has become necessary for XI profs -:)
    Regards
    Rajeev

    Hi,
    Please check the following
    1. Condition Table
    SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
    Select:
    Purchasing Doc. Type,
    Purch. Organization,
    Vendor
    2. Access Sequences
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
    3. Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
    Copy NEU to ZNEU or YNEU
    4. Message Determination Schemas
    4.1. Message Determination Schemas
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
    4.2. Assign Schema to Purchase Order
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
    5. Partner Roles per Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
    6. Condition Record
    Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
    Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type ZNEU or YNEU.
    G.Ganesh Kumar

  • Excise rate and value is not getting defaulted from the purchase order

    Hi all,
    While capturing excise invoice , the excise rate and value is not getting defaulted from the purchase order and in Excise Item Tab BED,AED,ECS is Zero at both header as well as item level for only one material in STO process and if we are doing same process taking other material all things are coming perfectly and We are maintaining condition with respect to vendor,plant and material combination.Any input related to this will be helpfull and rewarded.
    Regards
    Vishal

    Hi,
    Follow STO Process for this;
    1.Create a vendor for the company code of receiving plant, using account group: 0007 using T-Code XK01.
    2. Assign this vendor to Delivering plant
    Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
    3. Create internal customer with the sales area of the vendor. Go To XD01
    4. In pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
    5. Maintain condition records for the relevant pricing condition.
    6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
    7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
    8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
    Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
    9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
    Assign the document type NB to supplying plant and receiving plant
    10. After all settings, Create the STO using T-Code: ME21N and maintain pricing conditions of freight and Save.
    11. In supplying plant Maintain condition record in sales using VK11 the same will flow in receiving plant when referring the OBD no during MIGO.
    10. Create Delivery: VL10G
    12. Picking, PGI: VL02N
    13. Billing: VF01
    Save the document and its done
    14. J1IIN - Outgoing Excise Invoice
    15. MIGO - Goods Receipt against outbound Delivery
    16. J1IEX - Capture & Post Excise Invoice
    Rgs

  • Org unit is not getting defaulted for the selected position in infotype0001

    Org unit is not getting defaulted for the selected position in infotype 0001 during the hiring action.
    In OM Org. units and positions have been created.
    The Org. unit to Position relationship is also created.
    But inspite of this, In infotype 0001, the after selecting a position, the Org unit is still getting defaulted to "00000000" instead of the Org. unit Id to which the position belongs. (Please note: At the time of selecting the position, I do structure search and the position is shown under the correct Or. unit)
    Have I missed any step?

    Have u run the RHINTE programmes properly ?
    are u able to save the record?
    As some times it may be display probolem, if u r able to save the record then check the relationship in pp10/po13.
    and U have not answered what Mr. Valeri is asking about your Implementation/support because these type we come accress if data is not uploaded properly.
    Regards
    vinmax

  • Entries in T510 are not getting defaulted in IT0008

    Hi Experts,
    Entries maintined in T510  are not getting defaulted in IT0008.
    According to the wagetype model  (LGMST - Feature ) the wage types are defaulting accurately  but the amount is coming blank.
    Please advice.
    Regards,
    IFF

    V_T511 - Wage Type Characteristics maintian the indirect valuation model. Select the module variant as per ur req.
    V_T539A - Default Wage Types for Basic Pay
    LGMST - Feature
    V_T539J - Base Wage Type Valuation
    V_T7INA1 - Pay scale grouping for allowances
    V_T7INA3 - Associating pay parameters to pay scale grouping
    V_T7INB1 - Basic Wages
    V_T7INA5 - Wage type model for pay scale grouping for allowances
    V_T7INA9 - Reimbursement allowances perks - eligibility and calculation

  • HRA not getting defaulted in IT - 0008

    Hi SAP users,
    This will be the most basic configuration but don't know how I am facing a problem in defaulting HRA wage type in IT - 0008 (Basic Pay)
    I have created a wage type 9001 which was copied from M230,
    In T511 the wage type has INVAL B,   Amount = + & Number/unit = -
    In T7INA9
    WT        Amt               RAP indc 
    9001     Blank          A Allowance      INR      01.01.1990      31.12.9999
    In T7INT9
    WT          Tax Type                         Frequency      Exmpt It     Tax Code    
    9001      R Tax exemption is Rule      Blank               00.00     SHRA
    Also, I have maintained T510 in which 9001 amt is kept as Blank
    T539A the below values are maintained;
    TM 1 01.01.1990 31.12.9999 O 9000 Basic Salary
    TM 2 01.01.1990 31.12.9999 O 9001 HRA
    TM 3 01.01.1990 31.12.9999 O 9003 Conveyance Allowance
    TM 4 01.01.1990 31.12.9999 O 9006 Personal Pay
    TM 5 01.01.1990 31.12.9999 O 9008 Education Allow.
    T539J the below values are maintained;
    PRZNT 9001 HRA  1 01.01.1990 31.12.9999 9000 Basic Salary     50.00
    LGMST
    T = Test Basic
    PERSK Employee Subgroup
            TM = EXECUTIVE – SM3
                          20/TM
    TARIF
    T = Test Basic
        PERSK Employee Subgroup
            TM = EXECUTIVE – SM3
                     TM/GM
    T7INA1 - TM01 (EXECUTIVE – SM3)
    T7INA3 - GM TM 3 TM  TM01
    T7INA5 - TM01 --> 20/TM
    All the configuration is correctly done in the system still it is not defaulting in IT - 0008. Also, I saw a post in whcih it was mentioned that remove HRA from Table T7INT9 then it will be defaulted which i did & it worked. However, as per my understanding it is worng to remove the wt from there as it is used for Tax exemption nd linked with tax code.
    Please let me know wht measures should I take to resolve this issue.
    Regards,
    Prasad lad

    Hi Prasad,
    The configuration done from your side are correct . As per SAP standard, the HRA will not get defaulted unless IT581 is maintained. So we need to change the procedure to default the HRA WT
    1. In Hiring Action, Insert IT581 after the infotype IT0008 so that once you save the infotype 581 , HRA will get defaulted in Infotype 0008
    2. In IT581, If you dont know whether the Employee is staying in Rented house or Own house,Then inform your user to select always 'Own Accomodation' and then save it.
    3. In ESS, the employee can change the option in IT581 (IT declaration) later.
    Only way to get default other than i have mentioned above is removing the Wagetype from Table T7INT9, But the Exemption will not get calculated for the same.
    If you have any clarifications, then raise the Oss Message. SAP will definitely say the same thing.
    I hope this would resolve this issue.
    Thanks
    Rajini

  • Output type not determined during background Job

    Hi Experts,
    we have scheduled a Job to create Billing. In few of the billing documents, output type is not getting determined. Condition records are maintained correctly. This is happening only for few billing documents in spite of maintaining condition records?
    Can some one help me on this issue.

    shravan,
    added: How do users come to know that in few documents output is not getting determined?
    To check determination of output record - In VF02, give the billing document for which output was not determined.
    Goto > Header > Output, check if the output has got determined.
    If not then it is not getting determined.
    any difference between the documents in which output is getting determined and in which not?
    TW
    Message was edited by: TW Typewriter

  • I am not getting default currency in "Anual salary" fiield - IT0008

    Hi,
    I am not getting default currency in Anual salary fileld while creating data in IT0008.
    Please help me where I need to maintain this values, this is for few countries only.
    Thanks in advance.
    RS.

    Hi,
    Maintian the table V_T510F_B for your pay scalre type and payscale area with respective to your country grouping.
    Regs,
    Brahma

  • EDI Output ZB00 not getting determined in case of Split Deliveries.

    Hello All,
    A very Good Morning to you,
    Hope you are doing good,
    We have come across one critical Issue where the EDI Output ZB00 Dispatch Advice is not getting determined in case of few Split Deliveries in PROD.
    Issue : On a daily basis our Client is generating Split Delivery Process used for some specific customers only.
    These specific customers we are maintaining in ZPARAMS Table. The Flow of the Process is as below.
    Sales Order -->Parent Delivery ZLF--> Split Delivery ZLS--> Invoice ZF2.
    First the Sales Order ZOR is created through VA01 or EDI.
    This ZOR is processed via ZVL10A to create parent delivery ZLF.
    Once the parent delivery ZLF is created an Outbound IDoc SHPOD gets triggered which goes to the Distribution Centre Technicolor UK to check the confirmed qty and materials that needs to be delivered.
    Once the Quantity is verified and confirmed from DC an Inbound IDoc SHCON interface SAP.
    This Inbound SHPCON IDoc checks the entry in ZPARAMS for that customer. If the entry is found it creates one more Split Delivery ZLS doing picking and post Goods Issue in one step. This is the point where the ZB00 output is determined automatically in ZLS Delivery and processed successfully immediately.
    After that the Normal Invoice ZF2 is created.
    We have given the process flow details in the attachment along with Functional Modules used by the EDI Team.
    Now the Issue we are currently facing on a daily basis in PRD Out of the Total Count of ZLS Deliveries in few of ZLS Deliveries ZB00 Output is not getting determined at all which is causing a huge revenue loss. For remaining ZLS Deliveries it is getting determined correctly and processed.For Split Delivery we have only 2 Customers.
    We would like to know why this is happening in case of only few ZLS Deliveries.
    As a work around we have just write one program for these disputed deliveries where it will go in VL02N of these deliveries and save it without doing any changes. This will make ZB00 determined and processed immediately.
    We have even check the scenario in Quality Client no Issues at all. It is getting determined and processed successfully for all the test cases we created.
    Please could you help us on this so that we can fix this critical Issue.
    Many Thanks,
    Farhan.

    if QA system works correct
    you probably need to find the difference between it and PRD client.
    I guess it is a huge job.
    but who does if not you?
    because you have  a lot of custom things included coding
    also request abaper.

  • VA00 condition type not getting determined for the returns order

    Hi All,
    I have a case where VA00 condition type not getting determined for the returns order that has been created with respect to the billing document.
    When the pricing conditions are being copied from invoice it is getting copied but later it is getting deleted in the include LV61AA42.
    Note:VA00 condition type is getting deleted from the  internal table tkomv[].
    If any one came across  this scenario can you please help me.
    Request your valuable inputs

    Hi,
    Please check the copy control setting in VTAA.
    Maintain the pricing type as "D" at item category level for the respective document type .
    Hope this will resolve your issue.
    Regards,
    Krishna O

  • Employee percentage not getting defaulted in additional actions

    Hi all,
    My employement percentage & position is not getting defaulted in 0001 - while running additional actions. I need to manually key in the percentage and in case of any promotion i need to manually key in the changed position number.  Can somebody help.
    Regards,
    LN Bhattacharya
    Edited by: Lakshminarasimhan Bhattacharya on Mar 15, 2011 5:02 PM

    Hi,
    your problem is because U didnt maintain intigration b/w om &pa
    thats why ur getting that prob.... To make integration between PA and OM (also read as integration between PA and PD)
    IMG> PA> OM--> Basic settings > integration>set up integration with PA or u can go by using table T77S0
    set the integration switch PLOGI ORGA to X
    Check the switch PLOGI PLOGI is marked as 01- for active plan version integration
    Table T77S0 is the major table for OM - PA integration
    u can do that through running the reports like;
    Reports in relation to PA - OM
    Report RHINTE00 is used to transfer data from PA to OM
    RHINTE10 is to transfer OM data to PA tables
    RHINTE30 is to update IT0001 (org assignment) for the person you have selected
    RHINTE20 is to determine whether the data relevant for integration is available in PA and OM
    if u maintained percentages and positions in om.... after doing integration those will default in pa
    hope this helpful to u ,
    all the best,
    regards
    hima bindu
    Edited by: Hima Bindu4 on Mar 15, 2011 10:02 PM

  • In Italy, for IT 0002 State is not getting defaulted.

    Hi,
    While maintaining Personal data IT 0002 for Italy, when I select the birth place, the municipality key is getting defaulted but the state field is not getting defaulted. As a result, I can select any state and when I press the save button system is accepting it; which should not happen. Please help me how I can solve this issue.
    Regards,
    Sai

    Hi Sai,
    check T5ITM4 table once may be it helps you
    Regards,
    Kitchlu

  • Message output condition typ for PO not getting defaulted during PO create

    Hi,
    I have created a ZNEU output type for purchase order print out for ZNB purchase document type by copying the stndard NEU output  type ,
    I have mainatined the condition record in NACE for ZNEU out put type against the Purchase docuemnt type ZNB, but when i create a PO and save i am not getting the ZNEU message output type as default in PO,
    Kindy provide your valuable input.
    My requirement is to default z output type in PO

    Hi
    SPRO-MM-Purchasing-messages-ouput control-message type-define message type for PO-Fine tuned control PO
    Here you can define which message type needs to be defaulted
    Regards
    Sandeep

  • Output type not defaulting on PO?

    Hi,
    I am trying to get the NEU Output type (we use this output type used to send the PO to the vendor through email) to default onto the PO.
    I have maintained all relevent customization, and master data:
    1.     Output Type NEU defined with external send medium (5)
    2.     Communication strategy CS01 defined
    3.     Communication strategy assigned to output type NEU
    4.     Condition record maintained in MN04 for order type / porg / pgroup using medium 5 (external send)
    5.     E-mail address maintained in vendor master record
    6.     E-mail address maintained in my user master record
    When I create a PO, no output is automatically created.  If you check the output determination analysis, it actually finds the condition record, but does not generate the output for some reason.
    Diagnosis
    A valid output condition has been found for the application object.
    System response
    An output proposal is created.
    Procedure
    Execute function
    Any thoughts on why?
    Cheers,

    Hi MD Patel,
    I tried assigning a form to the output type, however this doesn't make a difference.
    The requirement I have here, is upon save of the PO, they want to send an internal email message to the PO creator / approver / requisition creator (ihat tells them the PO# that was created, vendor, the header details from the PO, etc.) WITHOUT the PDF PO form attachment.  The way I decided to implement this was to configure a new output type for simple mail, and configure it to default onto the PO messages screen (however the defaulting is  the piece that is not working).  I then plan to add some custom logic to determine the recipient list for the email and send the email (e.g. if this output type is defaulted on the PO messages screen, then obtain PO creator, approver and Requisition creator's email addresses, populate the communication tab of the output message with these email addresses, and then upon save of the PO, the message would be sent to the users). 
    When I look at the message type determination analysis in the PO messages screen, it finds the output condition record.
    Diagnosis
    A valid output condition has been found for the application object.
    System response
    An output proposal is created.
    Procedure
    Execute function
    However, there is also a message in the message determination analysis screen saying that there is no partner found for partner function MP
    Condition type  Message     Description
    ZEMA     539                         No partner was found for Partner function MP
    Could this be the cause?  In my condition record, I have specified the "Dummy recipient for output" as I obviously cannot set it to a certain email address as the recipient needs to be determined uniquely for each PO.
    Any thoughts?
    Cheers,

Maybe you are looking for