Outputs using Crystal Reports

Hello,
We are currently using Jetform as the designer for our outputs like Invoice, Order confirmation, etc.....
We would like to switch to Crystal instead, but don't really know where to start from.
- We already have crystal on our B/W instance
- The additional need for Crystal is in R/3, and would be triggered trough ABAPs.
Thank you in advance for yours hints

Thanks for your help!
What I am looking for. I guess, is the equivalent for older medium, like:
we call up smartforms from ABAP using the generated function modules
we call up sapscript from ABAP using the predefine function call (write_form open_form close_form, etc)
we call up Jetform using special control code along with the data, sent to a jetform configured printer
What kind of call would we then make to send data to Crystal Reports place holder and print them?
Regards

Similar Messages

  • Again: Using Crystal Report to export excel sheet.

    Morning every one, first Iu2019d like to apologize for my last question see Using Crystal Report to export excel sheet. Itu2019s pretty hard to understand and wastes your precious time. Now here is a new one hopefully it will do myself a lot of help:)
    First, we have a table called HOURLY_PORTUTIL in the Database:
    Column Name...........Data Type  
    STARTTIME ................DATE
    CIRCLE.......................VARCHAR2
    SERVICENAME...........VARCHAR2
    PORTUTIL....................NUMBER
    The data in this table looks like:
    9/25/2008 00:00:00 AM...AP...(456)...0.01
    9/25/2008 01:00:00 AM...AP...(456)...0.04
    9/25/2008 02:00:00 AM...AP...(456)...5.04
    9/25/2008 12:00:00 PM...AP...(456)...0.02
    9/25/2008 00:00:00 AM...AP...AL-MOD...0.01
    9/25/2008 01:00:00 AM...AP...AL-MOD...0.04
    9/25/2008 02:00:00 AM...AP...AL-MOD...0.04
    9/25/2008 12:00:00 PM...AP...AL-MOD...0.02
    9/26/2008 00:00:00 AM...AP...(456)...1.01
    9/26/2008 01:00:00 AM...AP...(456)...0.34
    9/26/2008 02:00:00 AM...AP...(456)...5.24
    9/26/2008 12:00:00 PM...AP...(456)...7.72
    9/26/2008 00:00:00 AM...AP...AL-MOD...12.0
    9/26/2008 01:00:00 AM...AP...AL-MOD...0.23
    9/26/2008 02:00:00 AM...AP...AL-MOD...0.44
    9/26/2008 12:00:00 PM...AP...AL-MOD...8.11
    9/25/2008 00:00:00 AM...Delhi...(456)...1.01
    9/25/2008 01:00:00 AM...Delhi...(456)...2.04
    9/25/2008 02:00:00 AM...Delhi...(456)...6.04
    9/25/2008 12:00:00 PM...Delhi...(456)...7.02
    Then we have a Cross-Table:
    Columns:
    .............HOURLY_PORTUTIL.SERVICENAME
    Rows:
    ............HOURLY_PORTUTIL.CIRCLE
    ............HOURLY_PORTUTIL.STARTTIME
    ............@hourly
    Summarized Fields:
    ..............................Sum HOURLY_PORTUTIL.PORTUTIL
    The Formula @hourly converts, say, '9/25/2008 01:00:00 AM' to '01:00-02:00'.
    The above all is the information of our Cross-Table configuration, but the outcome is not what we want. I find that this forum doesn't want the user to post image, so I post the actually outcome and the outcome we want in my Picasa.
    Actually outcome:
    [http://picasaweb.google.com/enel.guo/ForWork#5288743968250408770]
    What we want:
    [http://picasaweb.google.com/enel.guo/ForWork#5288743974292750610]
    I know that the outcome looks good enough, but our customers don't think so. They want export the report to Excel sheet and have every row with exact CIRCLE and STARTTIME.
    Thanks again guys:)

    Hi  Ashwini Yadav,
    Thanks for your reply:)
    I'm afraid that your answer is not perfectly right. Again I'm sorry for my vague description. The suggestion you gave us is already adopted. The total and grand total part disappeared but we still can't get what we want.
    Please have a look at the new image link below, Hopefully it will give you a clear picture of what's going on:)
    Cross-table:
    [http://picasaweb.google.com/enel.guo/ForWork#5289122850514299506]
    Cross-Table configuration:
    [http://picasaweb.google.com/enel.guo/ForWork#5289123604007267826]
    Cross-Table configuration::
    [http://picasaweb.google.com/enel.guo/ForWork#5289122854967734466]
    The original output:
    [http://picasaweb.google.com/enel.guo/ForWork#5289120017105336914]
    The output we want:
    [http://picasaweb.google.com/enel.guo/ForWork#5289120018508824882]
    Edited by: Yu-Lin Liang on Jan 9, 2009 3:51 AM

  • How to use crystal report in php

    hello
    i need help for how to use crystal report for view the database report spacilly crosstab report i need it very much to complete my project ill be very thank full for help
    from farooq

    Hello sir
    i am sudeep and i need to deploy crstal reports in php
    i want to integrate it in sugar crm (open source project(
    can u plz tell me how to do it
    i have written this code
    <?php
    //echo phpinfo();exit;
    $ObjectFactory= New COM("CrystalReports11.ObjectFactory.1");
    $crapp = $ObjectFactory->CreateObject("CrystalDesignRunTime.Application");
    //$crapp = new COM("CrystalRuntime.Application.10");
    $reportToRun="C:\Report4.rpt";
    $creport = $crapp->OpenReport($reportToRun, 1);
    //reportToRun=full path to *.rpt file
    $creport->Database->Tables->
    Item(1)->ConnectionProperties['User ID'] = $user;
    $creport->Database->Tables->
    Item(1)->ConnectionProperties['Password'] = $pass;
    //fomatType = integer 22=xls, 31=pdf etc
    $creport->ExportOptions->FormatType = $formatType;
    //type 1 is to output to a file I think 2 is email
    $creport->ExportOptions->DestinationType = 1;
    //location = full path to report output file
    $creport->ExportOptions->DiskFileName = $location;
    $creport->DiscardSavedData();
    $creport->Export(False);
    ?>
    thanks in advance

  • How to use Crystal Report in JDeveloper

    Hi all,
    I'm a JDeveloper fresher. To day, i want to use Crystal Report 2008 in JDeveloper.
    Please support to me: how to setup, config Crystal Report to use with JDeveloper.
    share to me your demo if you have.
    Thanks!

    No, I don't have example (I usually work with Crystal Reports inside MS Visual Studio and C#)
    But some very basic example would be:
    1. Create rpt file in Crystal Report Designer
    2. Download CR Java Runtime files from here: SAP Crystal Reports, version for Eclipse - Down... | SCN
    3. Add necessary jar files from previous step to your jdev project
    4. Create new java servlet and map to some url (for example: /reports)
    5. Add button/link to invoke this servlet, for example <a href="reports" target="_blank">click here</a>
    6. Inside your servlet add code similar to this:
    public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
        ReportClientDocument reportClientDoc = new ReportClientDocument();
        try {
            reportClientDoc.open("Path to your report file", 0);
    // for example, to output pdf file
    response.setContentType("application/pdf");
            reportClientDoc.getPrintOutputController().export(ReportExportFormat.PDF, response.getOutputStream());
        } catch (Exception e) {
            e.printStackTrace();
    If you want to use Crystal Reports JSF Viewer then you need to copy "crystalreportviewers" folder from downloaded CR Java Runtime to public_html location inside your app
    and adjust code in servlet:
    public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
        ReportClientDocument reportClientDoc = new ReportClientDocument();
        try {
            reportClientDoc.open("Path to your report file", 0);
            Object reportSource = reportClientDoc.getReportSource();
            CrystalReportViewer viewer = new CrystalReportViewer();
            viewer.setOwnPage(true);
            viewer.setReportSource(reportSource);
            viewer.setPrintMode(CrPrintMode.PDF);
            viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), response.getWriter());
        } catch (Exception e) {
            e.printStackTrace();
    Of course, you can embed this viewer in existing page(instead of opening in new page/tab)
    Dario

  • Creating Employee Badges using Crystal Report.

    Hi,
    I have a requirement where i have to create Badges for Employees using Crystal Reports. The report is created but the issue here is when i generate the PDF output, apart from the portion of the rectangular Badge, there is lot of white spaces on the report and when i give it for printing, the entire PDF with white space is also coming up. I tried with resizing the crystal report but it did not worked. I want only the rectangular portion of the badge to come on the PrintPreview which can then be given for Print. Is it something to do with the print setting? I am using a special kind of printer(Evolis-Pebble) which is used to print badge cards.
    Any help will be greatly appreciated.
    Thanks,
    Ashish.

    Thanks Jayaprakash, we have asked for the installation of printer driver on the server machine where we design the report. Hopefully, we should get options to customize the report template to correct size as of the Badge size. Currently only default options are coming which doesnot allow us to use custom option to have the report to exact size of the Badge in the page setup.
    Thanks,
    Ashish.

  • Using Crystal Report to create reports from ABAP

    Hello,
    We are currently using Jetform as the designer for our outputs like Invoice, Order confirmation, etc.....
    We would like to switch to Crystal instead, but don't really know where to start from.
    - We already have crystal on our B/W instance
    - The additional need for Crystal is in R/3, and would be triggered trough ABAPs.
    What I am looking for. I guess, is the equivalent to when:
    we call up smartforms from ABAP using the generated function modules
    we call up sapscript from ABAP using the predefine function call (write_form open_form close_form, etc)
    we call up Jetform using special control code along with the data, sent to a jetform configured printer
    => What kind of call would we then make to send data to Crystal Reports place holder and print them?
    => What kind basis set-up is needed to have to comunication between Crystal and SAP established?
    Thank you in advance for yours hints

    Hi,
    You will likely be able to access the tables directly using the Opensql driver using Crystal Reports.  I don't understand why you are assuming that an Infoset is necessary.  Can you point me to the documentation that states that an Infoset is necessary?
    In any case, if you want to create an Infoset, this is done in SQ02.  You need to make sure that you belong to a user group in order for Crystal Report to see the infoset.

  • Can we create Multi Tabbed excel Sheet using Crystal Reports 2008

    Hi,
      We want to create a Crystal Report which will export the output as multiple Tab's ( we can use sub reports).  Can we create a Multi Tabbed excel Sheet using Crystal Reports 2008 ( not  Crystal reports Basic 2008). Please share any information/links on how to do that.
    Also if it is not supported please let us know which version supports it.
    Thanks,
    Vasu

    At least one of the 3rd-party Crystal Reports Desktop Scheduling tools listed at: http://www.kenhamady.com/bookmarks.html provides that functionality.  It allows you to burst a single report so that each Group at level 1 becomes a separate tab.  You can control the tab names (and tab colors) via fields/formulas inside the report.
    You can also automate the process of exporting to (and also replacing or appending to) specified tabs inside existing workbooks.

  • How to use crystal report with php

    Hello every body
    can any body know how to use crystal report with php any helping material, code or tutorial for my problem ill be very thankful for helping me
    farooq

    Hello sir
    i am sudeep and i need to deploy crstal reports in php
    i want to integrate it in sugar crm (open source project(
    can u plz tell me how to do it
    i have written this code
    <?php
    //echo phpinfo();exit;
    $ObjectFactory= New COM("CrystalReports11.ObjectFactory.1");
    $crapp = $ObjectFactory->CreateObject("CrystalDesignRunTime.Application");
    //$crapp = new COM("CrystalRuntime.Application.10");
    $reportToRun="C:\Report4.rpt";
    $creport = $crapp->OpenReport($reportToRun, 1);
    //reportToRun=full path to *.rpt file
    $creport->Database->Tables->
    Item(1)->ConnectionProperties['User ID'] = $user;
    $creport->Database->Tables->
    Item(1)->ConnectionProperties['Password'] = $pass;
    //fomatType = integer 22=xls, 31=pdf etc
    $creport->ExportOptions->FormatType = $formatType;
    //type 1 is to output to a file I think 2 is email
    $creport->ExportOptions->DestinationType = 1;
    //location = full path to report output file
    $creport->ExportOptions->DiskFileName = $location;
    $creport->DiscardSavedData();
    $creport->Export(False);
    ?>
    thanks in advance

  • Print Preview using crystal report in SAP B1 slow.

    Dear all,
    I face another problem. Print preview using crystal report in SAP B1 is very slow. Although i have create a query view in SQL server but it's still slow for my user. First time i create using table in crystal report. just drag the table. It's take more than 10 minutes. After that i move all the query to view in SQL server , it's take 1-2 minutes to print preview some time more.. But i think that it's still slow. Does any one know how to print preview fast. Just like in PLD.
    Thanks in advance
    bodhi86

    Hello,
    How do you answered to this question ?
    Malika
    Edited by: Malika Sanoune on May 13, 2011 1:48 PM

  • Performace Issue using Crystal Report For enterprise and BEx Queries

    Hi all;
        We are generating the following error stack when trying to build a report on top of a BEX query using Crystal Report for Enterprise :
        |7C4F8ECE44034DB897AD88D6F98B028B3|2011 12 12 17:24:21.277|+0100|>>|E| |crj|20380|  56|ModalContext    | |2|0|0|0|BIPSDK.InfoStore:query|CHVXRIL0047:20380:56.174:1|-|-|BIPSDK.InfoStore:query|CHVXRIL0047:20380:56.174:1|Cut2PbOe3UdzgckPBHn8spEab|||||||||com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects||Assertion failed: Java plugin for CommonConnection is not loaded.
    java.lang.AssertionError
         at com.businessobjects.foundation.logging.log4j.Log4jLogger.assertTrue(Log4jLogger.java:52)
         at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.newInfoObject(InfoObjects.java:576)
         at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.continueUnpackHelper(InfoObjects.java:548)
         at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.continueUnpack(InfoObjects.java:489)
         at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.startUnpack(InfoObjects.java:464)
         at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore$XRL3WireStrategy.startUnpackTo(InternalInfoStore.java:1484)
         at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore$XRL3WireStrategy.startUnpackTo(InternalInfoStore.java:1464)
         at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.unpackAll(InternalInfoStore.java:910)
         at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.queryHelper(InternalInfoStore.java:944)
         at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.queryHelper(InternalInfoStore.java:929)
         at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.query_aroundBody24(InternalInfoStore.java:798)
         at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.query(InternalInfoStore.java:1)
         at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.query_aroundBody20(InfoStore.java:175)
         at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.query_aroundBody21$advice(InfoStore.java:42)
         at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.query(InfoStore.java:1)
         at com.businessobjects.mds.securedconnection.cms.services.olap.OlapCmsSecuredConnectionService.getConnectionObject(OlapCmsSecuredConnectionService.java:125)
         at com.businessobjects.mds.securedconnection.cms.services.olap.OlapCmsSecuredConnectionService.getOlapSecuredConnection(OlapCmsSecuredConnectionService.java:191)
         at com.businessobjects.mds.securedconnection.loader.internal.SecuredConnectionLoaderImpl.getOlapConnectionFromSecuredConnection(SecuredConnectionLoaderImpl.java:83)
         at com.businessobjects.mds.securedconnection.loader.internal.SecuredConnectionLoaderImpl.getConnectionFromSecuredConnection(SecuredConnectionLoaderImpl.java:60)
         at com.businessobjects.dsl.services.workspace.impl.DirectOlapAccessDataProviderBuilder.loadSecuredConnection(DirectOlapAccessDataProviderBuilder.java:193)
         at com.businessobjects.dsl.services.workspace.impl.DirectOlapAccessDataProviderBuilder.loadSecuredConnection(DirectOlapAccessDataProviderBuilder.java:176)
         at com.businessobjects.dsl.services.workspace.impl.DirectOlapAccessDataProviderBuilder.provideUniverseFromCms(DirectOlapAccessDataProviderBuilder.java:63)
         at com.businessobjects.dsl.services.datasource.impl.AbstractUniverseProvider.provideUniverse(AbstractUniverseProvider.java:41)
         at com.businessobjects.dsl.services.workspace.impl.AbstractDataProviderBuilder.updateQuerySpecDataProvider(AbstractDataProviderBuilder.java:119)
         at com.businessobjects.dsl.services.workspace.impl.AbstractDataProviderBuilder.updateDataProvider(AbstractDataProviderBuilder.java:106)
         at com.businessobjects.dsl.services.workspace.impl.AbstractDataProviderBuilder.addDataProvider(AbstractDataProviderBuilder.java:49)
         at com.businessobjects.dsl.services.workspace.impl.WorkspaceServiceImpl.addDataProvider(WorkspaceServiceImpl.java:56)
         at com.businessobjects.dsl.services.workspace.impl.WorkspaceServiceImpl.addDataProvider(WorkspaceServiceImpl.java:45)
         at com.crystaldecisions.reports.dsl.shared.DSLTransientUniverseServiceProvider.createSessionServicesHelper(DSLTransientUniverseServiceProvider.java:72)
         at com.crystaldecisions.reports.dsl.shared.DSLServiceProvider.createSessionServices(DSLServiceProvider.java:428)
         at com.businessobjects.crystalreports.designer.qpintegration.DSLUtilities.getServiceProvider(DSLUtilities.java:279)
         at com.businessobjects.crystalreports.designer.qpintegration.InitializeDSLRunnable.run(InitializeDSLRunnable.java:82)
         at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:121)
    Here seems to be that a plugin is not loaded : com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects||Assertion failed: Java plugin for CommonConnection is not loaded.
    could this affect the performance of Crystal Reports for Enterprise and how could I fix this ?
    Best Regards
    Anis

    Venkat,
    Thanks for your response. Please note, however, the transaction RAD1 does not exist. Let me provide more details about the current settings of the InfoObject.
    The Characteristic is 'Item' (0CS_ITEM) and upon going to RSA1 >  Modeling > InfoObjects > Item (0CS_ITEM) > Right Click > Display > Business Explorer (tab) > Text Type is set to 'Long Text' and BEx description is set to 'Long description' already.
    When I run/execute the query with this Item characteristic, the results in BEx Analyzer is showing appropriate long text, however, Crystal Report for Enterprise shows short text only
    K
    Edited by: Kumar Pathak on Feb 3, 2012 6:18 PM

  • Problem on using Crystal Report Viewer on windows application ("specified type is not valid ")

    Hi
    I am having problem on using Crystal Report Viewer on one of my windows application.
    I am not sure how to put the Crystal Report Viewer 11 Control onto the tool box.
    I could found a Crystal Report Viewer control on my computer, but it is version 8.5.
    I have also found another one which is Called Crytal ActiveX Report Viewer, i don't think it is the one I can use. As when I try to load a dummy report on to the Crytal ActiveX Report Viewer, It return an error. "specified type is not valid"
    Please see the Code sample below.
    private sub loadReport()
         Dim r as New ReportDocument
         'v is the name of the Crystal ActiveX Report Viewer Control
         r.Load("C:\Report1.rtp")
         v.ReportSource(r) <---It throw error on this line.
    End Sub
    Could you give me some advice about what have I done wrong, How to check if I have set up the Crystal Report Component correctly in my Visual Studio 2005 Standard edition.
    Thanks in advances.
    Many thanks
    Chi

    VS 2005 Standard and Express editions do not come with Crystal Reports; only the Professional and higher editions will have CR bundled. However, I believe you can purchase CR XI R2 Developer and it will give you the components you need to create a VS .NET 2005 application using the Standard edition.
    -MJ

  • Print preview using crystal report in SAP B1 is very slow.

    Dear all,
    I face another problem. Print preview using crystal report in SAP B1 is very slow. Although i have create a layout in AR invoice form  and applying the print sequences (ie 4 prints). Does any one know how to print preview fast. Just like in PLD.
    Thanks in advance
    Kamlesh Naware

    Hi,
    Basically Crystal report run with SQL statement, I would suggest to do well performance tuning on SQL query / Store Procedure.
    Structure your query in DBA manner that will make some how faster such as use ( inner join, less condition,...)..
    also if it simple query then use Command in Crystal report rather store Procedure..that make some how Faster your report.
    Thanks
    Kevin
    Edited by: Kevin Shah on May 27, 2011 4:21 PM

  • Get error when preview marketing documents by using crystal report layout

    Hi experts,
    I want to switch to using Crystal Report for marketing documents layout.  I have import Sales Quotation u2013 Generic (CR) layout which provided by XX-1.2.b1p package. I can preview added records but it doesn't work on drafting documents and saved drafts. The system prompt u201CThe system cannot find the path specifiedu201D and u201CObject reference not set to an instance of an objectu201D. On the same server, it was working fine in our other company database. I don't think this is the problem of database location setting in Crystal Report.  Can anyone give me advices, thanks!
    Regards,
    Ivan

    Hi! Rahul,
    Thank you for your reply first. Your method doesn't work in my case.  Can you tell me the steps of creating a new layout for added records and draft documents.  I have created a quotation layout which work with added records only, the steps has been show below and please comments, thanks.
    1. In Crystal Report > new blank report > create new connection > Choose "SAP Business One" > Select OQUT under "B1 Tables".
    2. Insert "CardName" field to report > Create DocKey@ parameter and  set it equal to DocEntry in select expert record function
    3. Click Add-ins > SAP Business One > Save > Choose company database and input manager password.
    Regards,
    Ivan

  • Server error in printing in server using crystal report 2008 with VS2008

    Hi,
    We are using Crystal report 2008 in VS 2008. Everything working fine in local but when we deployed it in the server we are getting the below while print the report.
    "An error occurred on the server. Printing will be stopped. Would you like to view the error information"
    Anyhow the report is printing but I don't know why this error is occur and how to stop this. I had installed the CR runtime in the server. I dont know what is going wrong. The same we tested locally in a non crystal report installed PC.
    Please help me to get rid out of this error.
    Thanks
    Natraj

    Soemthing strange going on here.
    Typically this Integrated vs Classic is an issue with images where Classic uses web.config tags between <system.web><httpHandlers><u2026 crystalimagehandler../></httphandlers></system.web>
    Integrated uses tags between <system.webserver>u2026<handlers><..crystalimagehandler/></handlers></system.webserver>
    Not sure why this would affect printing.  Do you have tags that specifying where to download the printcontrol from?  On the other hand, I would think that if images had anything to do with it, then you'd get red Xs when viewing.  As far as I know, the printcontrol.cab doesnu2019t need to be specified in the <system.webserver> tags.
    This one may be best resolved over the phone. Phone support can be obtained here:
    http://store.businessobjects.com/store/bobjamer/en_US/pd/productID.98078100?resid=S6I@hgoHAkEAAGsiyVkAAAAR&rests=1282226845369
    Ludek

  • Sub report group tree in main report Using crystal report 12

    Hi experts,
        I have a strange requirement like, same data needs to be grouped two different ways in a same report.  Like
    Store1:
        Summary of sales on each item chart
    Store2:
        Summary of sales on each item chart
    .....it goes like this
    Department1(multiple stores)
          summary of sale on each item chart - store1
          summary of sale on each item chart - store2
         --........ it goes
    Department2
          summary of sale on each item chart - store3
    --........ it goes
       Its in single report, the first part is grouped only with store and in second part the store is under department. How to do this in same report?
        I achieved  this by creating a sub report to display the first part of data and in the main report sup report data plus the second part of data will be displayed. And its working well but now the problem is the group tree, I'm not able to see the sub report group tree in the main report.
       How to get the sub report group tree in the main report, Or is there any other better way is there so i can get both the data as well the group tree. Please help me to solve this. CryCryCry
    I'm using crystal report 2008(installed separately) with Visual Studio2008 (.Net3.5)
    Thanks in advance.

    Hi
    Thanks for the reply.
        Yea both data source are same(Datasource is SQL Stored Procedure). I cant use like that, because my client needs the group tree also. In case if there is no group tree, we can create one more group and supress it conditionaly. But here the problem is there is no way to suppress any of the group item in group tree as we can do it in the detail section.
        So please me with some different ways and also , please clarrify the following doubts
    1. Can we supress one or more items in the group tree.
    2. Can we get the sub report group tree in main report(Everything is working when i used the sub reports except the group tree). So I'm trying for different ways to do, but none is helping me
    Please help me

Maybe you are looking for

  • MigratingBW to BO but not from the BW system from R/3 system.

    Dear sap, we are migrating the Reports from BW3.5 to BO but the thing is we want to take data from the cProjects . few functionmodules are there like dpr_bw_get_transaction.they are normal functionmodules. need to get the data from tham if we create

  • Close reference needed for step object reference open? If so, how?

    Hello, We are using an activex method call to open an object reference to a step and programatically rename it.  This is done many many times during our test run, thousands.  We ran into an "out of memory" problem we had never seen before during a 72

  • UCCX 9.0 CAD Logout non-activity time

    I'm trying to find a way to automatically log agents out of CAD after they've been sitting idle for a certain period of time.  I know this exists from seeing it at previous jobs where I was an agent.  I've searched for any articles or forum posts I c

  • I do not have any phones with SMS messaging, so how can I use iCloud?

    iCloud asks for a phone number with SMS for verification. I have no such phones. I have plenty of phones and phone numbers, but NO SMS on anything. Why isn't there some other way?

  • Problems printing to Sieko SLP 200 printer

    I have a Sieko SLP 200 label printer connected to a USB port and set as my default printer.  Using the report generation tool kit, I have tried several combinations to print.  The label will advance, but the text I want to print, a single line 10 dig