Outputting multiple docs in 1 PDF

Using WDA, we're Currently, we're printing a project summary (1 page) pdf .
The users would like to be able to send in 1 - 10 project numbers and have the single output pdf display 1 page for each project they choose.
I think I have my Context set up properly:
PDF_CONTAINTER 1:1
PDF_TABLE 1:N
Several Item level tables & attributes
Where PDF_TABLE and its subnodes/attributes hold the project data.
I have defined my (only) Page as Positioned, Allow Page Breaks within Content, Repeat Subform for Each Data Item (min 1, no max), and have bound it using $record.PDF_TABLE.DATA[*]
However, when I run the program for 2 projects, I only get 1 page and the data is printing on top of each other.
So, this leads me to believe I am not populating my PDF_TABLE appropriately. How do I properly append an entirely NEW set of data to that PDF_TABLE context object?
thanks,
rp.

Try using conditional break at pagination settings of you subform.
E.g.
Language: FormCalc
RunAt: Server
Code: DATA[-1].{your field with project number} ne DATA.{your field with project number}
Break: Before
To: Top of Next Page
Regards,
Pjotr Perstnev

Similar Messages

SCRIPT TO IMPORT MULTIPLE PLACED IMAGES..AND OUTPUT MULTIPLE IMAGES TO SINGLE PDF.

Anyone got a script to import multiple placed images into CS4? or is this possible in CS5?
and can we output multiple layers into a single PDF in illustrator? Or multiple layers into single JPEGS from illustrator with one command instead of individually saving out each page... would be a huge time saver for me.
Currently I output each completed layer individually and then right click those outputted jpegs in their output folder and choose "combine supported files into acrobat..." to make a single acrobat file..
I`d also like to be able to CTRL click multiple layers and go save as... only those layers get saved out...
And so adding something in the Save for PDF output dialogue box to save layers to multiple pages would be a helpful time saver..

In CS 4 and CS 5 you can drag and drop fro m the finder or the Bridge, and I guess any other similar type viewer, multiple number of image files to a document. You can configure the bridge in such a way as to allow you to see the Bridge and your document at the same time for this very purpose.
If you just drag and drop the files are linked if you drag while holding the shift key then the files will be embedded.
ID and PS CS 5 have a minibridge which works the sam way but is an actually panel and will stay in the front.
I separate the images but they import one on top of another.

Automator: Cannot convert multiple .doc files to PDF

Hi everyone!
I can't get my automator to print PDF files correctly. Once I have run the workflow I try to open the files and they are "messed up" preview and adobe both tell me that the "File cannot be opened. It may be damaged or use a file format that Preview doesn’t recognize."
When I go to Automator I see an error message - (1728) The object you are trying to access does not exist. However, if I manually create the PDF from Word or Pages, I have no problem.
I really appreciate the help, I need this to grade student papers and I have 200 students. Figuring this out would really make my life better.
Thank you for your time!
Diana

Here's the screenshot.
I tried using several different files and it seems not to be the problem.
/Users/arqanaid/Desktop/Screen shot 2011-03-04 at 2.32.46 PM.png
Thank you all for being so helpful!

Scanning multiple docs

I have a psc 1310 and am trying to scan multiple docs to one pdf file.

Hey , Welcome to the HP Support Forum. I hope you enjoy your experience here. I understand you're curious about your HP PSC 1310 All-in-One Printer's scanning functinality. I would like to assist you with this. I have a suggestion that might help you configure the setting you're looking for. Click on the 'How to scan a multi-page original text document into a single file' heading in this HP article for instructions. The setting you're looking for is described therein. Please let me know the result of your troubleshooting by responding to this post. If I have helped you resolve the issue and you liked this post, feel free to give me virtual props by clicking on the 'Thumbs Up' icon below and clicking to accept this solution. Thank you for posting in the HP Support Forum. Have a great day!

Creating pdf from multiple docs in PS8

i need to create a multi page PDF docs from multiple docs using photoshop elements 8. source docs will be other formats (e.g. MS WORD), but i could convert to pdf.
any help would be greatly appreciated.

Yes you can open Writer (the word processing/text module) and use it like a blank word document. You can copy and paste from other sources, import image files, tables and objects and save as PDF.
This is how it looks:
Click to enlarge

Word 2008 doc saves into multiple docs instead of one PDF

I have installed Acrobat 9 Pro and am trying to print a Word 2008 doc to a PDF. Instead of creating and saving as one document it splits it into several whenever the page set up changes from profile to landsacape or vice versa. This happens whether I use the PDF print button or the Adobe Printer option. Any advice would be gratefully appreciated. Cheers.

I am afraid to break the news to you, this has been an on going problem with Acrobat converting Word File to PDF. Its been a problem from the get go. Adobe says, its Microsoft's Problem. Microsoft says its Adobe Problem, they both blame Apple. Problem, is Apple licenses the PDF subsystem used OSX since day one from Adobe; and, the problem existed in OS9 which didn't use PDF as the the underlying print/display engine, which tends to point the finger to Adobe. Another thing point to its adobe's problem, is that Microsoft has been waiting patiently for adobe to fix the problem since day one about 10-15 years, So they desided in Office 2008 to use their own built in Converter for PDF. This reduces the problem of breaking the pdf up only if you have a shift orientation. The problem lies in Adobe either doesn't know how or can't figure out how, or doesn't want to be bothered with finding out how microsoft Page and Section breaks work. They are unique to Microsoft.
The cure is to either use Word 2008's Save as... Command then choose PDF. In which case unless you have a chart or something that should be in Landscape mode, will make a complete PDF.
Or to take the pieces that are created by Acrobat/Distiller AdobePDF Print Drive and doe the following:
Open the first part, scroll to end
Then go to Edit menu and choose Edit menu > Insert Pages
Locate second part and choose okay or insert.
repeat 1-3 with next section
Continue doing this until all the pieces are together.
There is no way around this problem other than not using page and section breaks and not using charts or items that require viewing in Landscape orientation. Which may or may not be realistic.
If you must use items in landscape mode my suggestion would be create them separately and, then when printing, print them speparately one copy, then place the chart where you want and use a Copy machine to make the copies in the right order. Or use my direction above to insert them in proper place.

MULTIPLE place image import...& "save as.." multiple layers to multipage PDF

Hello,
just some suggestions I`d like to see to speed up my set up and output..
i`d like to import multiple placed images into illustrator CS4. So open dialogue box place, and multiple select images for placing.
regards output save as...
Can we output multiple layers into a single PDF in illustrator? Or multiple layers into single JPEGS from illustrator with one command instead of individually saving out each layer... would be a huge time saver for me.I create different artworks on different layers..
Currently I output each completed layer individually and then right click those outputted jpegs in their output folder and choose "combine supported files into acrobat..." to make a single acrobat file..i`d like to do this right in the illustrator "save for PDF" dialogue box. Adding something in the Save for PDF output dialogue box to save layers to one PDF as multiple pages would be a helpful time saver..
I`d also like to be able to CTRL click multiple layers and go " save as..." only those layers get saved out...

, bridge -FILE/PLACE into ai, goes to separate layers in AI as placed.
in PS, bridge/tools/ps/load files into ps layers.. CS4.
just using right click in explorer on individual PDF docs from layers saved from PS to combine to PDF. but cannot output multiple pds from layers in AI in CS4.

Combining Office 2010 word docx files or doc files into pdf freezes Adobe Acrobat 9.X

When combining multiple Office 2010 Word docs into one pdf causes Adobe to freeze. A word dialog box pops-up prompting to save the pdf to start out(which is incorrect). Naming the pdf should be the last step. It does save the first doc into the pdf you name but does not merge the rest of the pages and just freezes. I have uninstalled, repaired Office, etc. Any suggestion would help or it looks like a complete rebuild of the system.

Thanks again Bill
I tried printing to the Adobe PDF printer as you suggested, the process was successful and no errors came up. Close examination of the file did not reveal ant weird formatting or fonts. I tried repairing the file with Word to no avail.
I eventually found that replacing the last two paragraphs of the document which contained a couple of links did the trick. Something weird and unexplained. All I know for sure is the issue is dealt with on my end.

Sending ALV output in a mail in PDF format

Hi folks,
            I have a requiremtnt. If i execute my ALV report in background, the output should be sent to the reciepient's mail in pdf format. i have used the function moudles CONVERT_ABAPSPOOLJOB_2_PDF and SO_DOCUMENT_SEND_API1. Now i am able to see my report output in spool in some pdf formt. how can i send this to the reciever mail as an attachement...pls send me any sample report which suits my reqirement...thanks in advance,
           Ram.

REPORT ZSAP_EMAIL MESSAGE-ID Z001.
*TABLES: rlgrap, btcxpm." zlookup.
DATA:
V_ZCODE(3) TYPE C,
*svrname LIKE zlookup-zdesc,
WA_ERROR(80) TYPE C,
GLOBAL_FILEMASK_ALL(80).
DATA: T_SOUD LIKE SOUD.
DATA: P_INFOLDER LIKE SOFDK.
DATA: P_OUTFOLDER LIKE SOFDK.
DATA: OBJECT_HD_DISPLAY LIKE SOOD2.
DATA: OBJECT_ID LIKE SOODK.
DATA: DOCUMENT LIKE SOOD4.
DATA: HEADER_DATA LIKE SOOD2.
DATA: LINK_FOLDER_ID LIKE SOODK.
DATA: FOLDER_SELECTIONS LIKE SOFDS.
DATA: FOLDER_LIST LIKE SOXLI OCCURS 0 WITH HEADER LINE.
DATA: RECEIVERS LIKE SOOS1 OCCURS 0 WITH HEADER LINE.
DATA: OBJCONT LIKE SOLI OCCURS 0 WITH HEADER LINE.
DATA: OBJHEAD LIKE SOLI OCCURS 0 WITH HEADER LINE.
DATA: OBJECT_CONTENT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
DATA: OBJECT_HD_CHANGE LIKE SOOD1.
DATA: BEGIN OF FILES OCCURS 0,
LINE(200) TYPE C,
END OF FILES.
DATA: LISTOBJECT LIKE ABAPLIST OCCURS 1 WITH HEADER LINE.
*Email to addresses
SELECTION-SCREEN: BEGIN OF BLOCK BL1 WITH FRAME TITLE TEXT-BL1.
PARAMETERS: P_MAILTO(240) TYPE C.
*PARAMETERS:P_MAILTO TYPE SOLI-LINE.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN COMMENT 10(2) TEXT-001.
*Use zlookup-ztype as group to define multiple email to addresses
*SELECT-OPTIONS: s_mailto FOR zlookup-ztype.
SELECTION-SCREEN: END OF BLOCK BL1.
*Subject
SELECTION-SCREEN: BEGIN OF BLOCK BL2 WITH FRAME TITLE TEXT-BL2.
PARAMETERS: P_SUBJ LIKE DOCUMENT-OBJDES.
SELECTION-SCREEN: END OF BLOCK BL2.
*Body
SELECTION-SCREEN: BEGIN OF BLOCK BL3 WITH FRAME TITLE TEXT-BL3.
PARAMETERS: P_BODY1 LIKE SOLISTI1-LINE LOWER CASE.
PARAMETERS: P_BODY2 LIKE SOLISTI1-LINE LOWER CASE.
PARAMETERS: P_BODY3 LIKE SOLISTI1-LINE LOWER CASE.
PARAMETERS: P_BODY4 LIKE SOLISTI1-LINE LOWER CASE.
PARAMETERS: P_BODY5 LIKE SOLISTI1-LINE LOWER CASE.
PARAMETERS: P_BODY6 LIKE SOLISTI1-LINE LOWER CASE.
SELECTION-SCREEN: END OF BLOCK BL3.
*Attachments
SELECTION-SCREEN: BEGIN OF BLOCK BL4 WITH FRAME TITLE TEXT-BL4.
PARAMETERS: P_FNAME1 LIKE FILES-LINE.
PARAMETERS: P_FNAME2 LIKE FILES-LINE.
PARAMETERS: P_FNAME3 LIKE FILES-LINE.
PARAMETERS: P_FNAME4 LIKE FILES-LINE.
PARAMETERS: P_FNAME5 LIKE FILES-LINE.
PARAMETERS: P_FNAME6 LIKE FILES-LINE.
SELECTION-SCREEN: END OF BLOCK BL4.
AT SELECTION-SCREEN.
PERFORM CHK_SELECTION.
IF NOT WA_ERROR IS INITIAL.
    MESSAGE E001 WITH WA_ERROR.
ENDIF.
START-OF-SELECTION.
END-OF-SELECTION.
PERFORM SEND_EMAIL.
FORM chk_selection
FORM CHK_SELECTION.
CLEAR WA_ERROR.
*Loop only once ???
*If more checkings to be done.
*Think about it and if not clear.
*Let it sink in for a couple of minutes.
*Still doesn't make sence? Go home and sleep on it.
DO 1 TIMES.
*Check Email to
    IF P_MAILTO IS INITIAL .
*AND s_mailto IS INITIAL.
      WA_ERROR = 'Invalid or no EMAIL TO selection'.
      EXIT.
    ENDIF.
ENDDO.
ENDFORM.                    "chk_selection
*& Form send_email
*text
*--> p1 text
*<-- p2 text
FORM SEND_EMAIL.
PERFORM GET_FOLDER_INFO.
PERFORM FILL_BODY.
PERFORM INS_NEW_OBJECT.
PERFORM CRT_ATTACHMENTS.
PERFORM FILL_RECEIVERS_INFO.
PERFORM SND_EMAIL.
ENDFORM. " send_email
*--+--
*FORM Get_folder_info
FORM GET_FOLDER_INFO.
CLEAR T_SOUD.
*Small so should be quick.
SELECT * FROM SOUD
INTO T_SOUD
WHERE SAPNAM = SY-UNAME.
    P_INFOLDER-FOLTP = 'FOL'.
    P_INFOLDER-FOLYR = T_SOUD-INBYR. "inbox
    P_INFOLDER-FOLNO = T_SOUD-INBNO.
    P_OUTFOLDER-FOLTP = 'FOL'.
    P_OUTFOLDER-FOLYR = T_SOUD-OUTYR. "outbox
    P_OUTFOLDER-FOLNO = T_SOUD-OUTNO.
ENDSELECT.
ENDFORM.                    "get_folder_info
*FORM fill_body *
FORM FILL_BODY.
OBJECT_CONTENT-LINE = P_BODY1.
APPEND OBJECT_CONTENT.
OBJECT_CONTENT-LINE = P_BODY2.
APPEND OBJECT_CONTENT.
OBJECT_CONTENT-LINE = P_BODY3.
APPEND OBJECT_CONTENT.
OBJECT_CONTENT-LINE = P_BODY4.
APPEND OBJECT_CONTENT.
OBJECT_CONTENT-LINE = P_BODY5.
APPEND OBJECT_CONTENT.
OBJECT_CONTENT-LINE = P_BODY6.
APPEND OBJECT_CONTENT.
ENDFORM.                    "fill_body
*FORM ins_new_object *
FORM INS_NEW_OBJECT.
OBJECT_HD_CHANGE-OBJNAM = 'Notes'.
OBJECT_HD_CHANGE-OBJDES = P_SUBJ.
CALL FUNCTION 'SO_OBJECT_INSERT'
    EXPORTING
      FOLDER_ID                  = P_OUTFOLDER
      OBJECT_HD_CHANGE           = OBJECT_HD_CHANGE
      OBJECT_TYPE                = 'RAW'
      OWNER                      = SY-UNAME
    IMPORTING
      OBJECT_HD_DISPLAY          = OBJECT_HD_DISPLAY
      OBJECT_ID                  = OBJECT_ID
    TABLES
      OBJCONT                    = OBJECT_CONTENT
      OBJHEAD                    = OBJHEAD
    EXCEPTIONS
      ACTIVE_USER_NOT_EXIST      = 1
      COMMUNICATION_FAILURE      = 2
      COMPONENT_NOT_AVAILABLE    = 3
      DL_NAME_EXIST              = 4
      FOLDER_NOT_EXIST           = 5
      FOLDER_NO_AUTHORIZATION    = 6
      OBJECT_TYPE_NOT_EXIST      = 7
      OPERATION_NO_AUTHORIZATION = 8
      OWNER_NOT_EXIST            = 9
      PARAMETER_ERROR            = 10
      SUBSTITUTE_NOT_ACTIVE      = 11
      SUBSTITUTE_NOT_DEFINED     = 12
      SYSTEM_FAILURE             = 13
      X_ERROR                    = 14
      OTHERS                     = 15.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "ins_new_object
*FORM crt_attachments *
*--> P_SUBJ *
FORM CRT_ATTACHMENTS.
DOCUMENT-FOLTP = P_OUTFOLDER-FOLTP.
DOCUMENT-FOLYR = P_OUTFOLDER-FOLYR.
DOCUMENT-FOLNO = P_OUTFOLDER-FOLNO.
DOCUMENT-OBJTP = OBJECT_ID-OBJTP.
DOCUMENT-OBJYR = OBJECT_ID-OBJYR.
DOCUMENT-OBJNO = OBJECT_ID-OBJNO.
DOCUMENT-OBJNAM = 'Notes'.
DOCUMENT-OBJDES = P_SUBJ.
DOCUMENT-OKCODE = 'CHNG'.
DOCUMENT-FILE_EXT = 'TXT'.
LINK_FOLDER_ID = OBJECT_ID.
HEADER_DATA-OBJLA = 'EN'.
HEADER_DATA-OBJNAM = DOCUMENT-OBJNAM.
HEADER_DATA-OBJDES = DOCUMENT-OBJDES.
HEADER_DATA-OBJPRI = '5'.
HEADER_DATA-OBJSNS = 'O'.
HEADER_DATA-FILE_EXT = 'TXT'.
REFRESH FILES.
CLEAR FILES.
IF NOT P_FNAME1 IS INITIAL.
    FILES-LINE = P_FNAME1.
    APPEND FILES.
ENDIF.
IF NOT P_FNAME2 IS INITIAL.
    FILES-LINE = P_FNAME2.
    APPEND FILES.
ENDIF.
IF NOT P_FNAME3 IS INITIAL.
    FILES-LINE = P_FNAME3.
    APPEND FILES.
ENDIF.
IF NOT P_FNAME4 IS INITIAL.
    FILES-LINE = P_FNAME4.
    APPEND FILES.
ENDIF.
IF NOT P_FNAME5 IS INITIAL.
    FILES-LINE = P_FNAME5.
    APPEND FILES.
ENDIF.
IF NOT P_FNAME6 IS INITIAL.
    FILES-LINE = P_FNAME6.
    APPEND FILES.
ENDIF.
IF NOT FILES[] IS INITIAL.
    CALL FUNCTION 'SO_DOCUMENT_REPOSITORY_MANAGER'
      EXPORTING
        METHOD      = 'ATTCREATEFROMPC'
      TABLES
        FILES       = FILES
      CHANGING
        DOCUMENT    = DOCUMENT
        HEADER_DATA = HEADER_DATA.
    IF SY-SUBRC = 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
      WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDIF.
ENDFORM.                    "crt_attachments
*FORM fill_receivers_info *
FORM FILL_RECEIVERS_INFO.
DATA: BEGIN OF RECLIST OCCURS 0,
REC LIKE RECEIVERS-RECEXTNAM,
END OF RECLIST.
*Build reclist
REFRESH RECLIST.
IF NOT P_MAILTO IS INITIAL.
    RECLIST-REC = P_MAILTO.
    APPEND RECLIST.
ENDIF.
*IF NOT s_mailto IS INITIAL.
*SELECT zdesc
*INTO reclist-rec
*FROM zlookup
*WHERE ztype IN s_mailto.
*APPEND reclist.
*ENDSELECT.
*ENDIF.
REFRESH RECEIVERS.
LOOP AT RECLIST.
    FOLDER_SELECTIONS-FOLNAM = 'INBOX'.
    CALL FUNCTION 'SO_FOLDER_LIST_READ'
      EXPORTING
        FOLDER_SELECTIONS          = FOLDER_SELECTIONS
        OWNER                      = SY-UNAME
        REGION                     = 'P'
      TABLES
        FOLDER_LIST                = FOLDER_LIST
      EXCEPTIONS
        COMPONENT_NOT_AVAILABLE    = 1
        OPERATION_NO_AUTHORIZATION = 2
        OWNER_NOT_EXIST            = 3
        PARAMETER_ERROR            = 4
        X_ERROR                    = 5
        OTHERS                     = 6.
    IF SY-SUBRC = 0.
      CLEAR RECEIVERS.
      MOVE: SY-DATUM TO RECEIVERS-RCDAT,
SY-UZEIT TO RECEIVERS-RCTIM,
' ' TO RECEIVERS-RECESC,
P_MAILTO TO RECEIVERS-RECNAM,
'X' TO RECEIVERS-SNDEX.
      APPEND RECEIVERS.
     RECEIVERS-RCDAT = SY-DATUM.
     RECEIVERS-RCTIM = SY-UZEIT.
     RECEIVERS-RECNAM = RECLIST-REC.
     RECEIVERS-RECNO = FOLDER_LIST-PARNO.
     RECEIVERS-RECTP = FOLDER_LIST-PARTP.
     RECEIVERS-RECYR = FOLDER_LIST-PARYR.
     RECEIVERS-SNDTP = FOLDER_LIST-PARTP.
     RECEIVERS-SNDYR = FOLDER_LIST-PARYR.
     RECEIVERS-SNDNO = FOLDER_LIST-PARNO.
     RECEIVERS-SNDNAM = SY-UNAME.
     RECEIVERS-SNDPRI = '1'.
     RECEIVERS-MSGID = 'SO'.
     RECEIVERS-MSGNO = '619'.
     RECEIVERS-DELIVER = 'X'.
     RECEIVERS-NOT_DELI = 'X'.
     RECEIVERS-READ = 'X'.
     RECEIVERS-MAILSTATUS = 'E'.
**receivers-ADR_NAME
     RECEIVERS-RESEND = ' '.
     RECEIVERS-SORTFIELD = ' '. "'USER WF_BATCH INDIGO BATCH'.
     RECEIVERS-SORTCLASS = '5'.
     APPEND RECEIVERS.
    ELSE.
      CLEAR RECEIVERS.
      RECEIVERS-SEL = 'X'.
      RECEIVERS-RECESC = 'U'.
      RECEIVERS-RECNAM = 'U-'.
      RECEIVERS-RECEXTNAM = RECLIST-REC.
      RECEIVERS-DELIVER = 'X'.
      RECEIVERS-NOT_DELI = 'X'.
      RECEIVERS-READ = 'X'.
      RECEIVERS-MAILSTATUS = 'E'.
      RECEIVERS-ADR_NAME = RECLIST-REC.
      RECEIVERS-SORTFIELD = RECLIST-REC.
      RECEIVERS-SORTCLASS = '5'.
      APPEND RECEIVERS.
    ENDIF.
ENDLOOP.
ENDFORM.                    "fill_receivers_info
*FORM snd_email *
FORM SND_EMAIL.
CALL FUNCTION 'SO_OBJECT_SEND'
    EXPORTING
      FOLDER_ID                  = P_OUTFOLDER
      OBJECT_ID                  = OBJECT_ID
      OUTBOX_FLAG                = 'X'
      OWNER                      = SY-UNAME
      CHECK_SEND_AUTHORITY       = 'X'
      ORIGINATOR_TYPE            = 'J'
      LINK_FOLDER_ID             = LINK_FOLDER_ID
    TABLES
      OBJCONT                    = OBJECT_CONTENT
      RECEIVERS                  = RECEIVERS
    EXCEPTIONS
      ACTIVE_USER_NOT_EXIST      = 1
      COMMUNICATION_FAILURE      = 2
      COMPONENT_NOT_AVAILABLE    = 3
      FOLDER_NOT_EXIST           = 4
      FOLDER_NO_AUTHORIZATION    = 5
      FORWARDER_NOT_EXIST        = 6
      NOTE_NOT_EXIST             = 7
      OBJECT_NOT_EXIST           = 8
      OBJECT_NOT_SENT            = 9
      OBJECT_NO_AUTHORIZATION    = 10
      OBJECT_TYPE_NOT_EXIST      = 11
      OPERATION_NO_AUTHORIZATION = 12
      OWNER_NOT_EXIST            = 13
      PARAMETER_ERROR            = 14
      SUBSTITUTE_NOT_ACTIVE      = 15
      SUBSTITUTE_NOT_DEFINED     = 16
      SYSTEM_FAILURE             = 17
      TOO_MUCH_RECEIVERS         = 18
      USER_NOT_EXIST             = 19
      ORIGINATOR_NOT_EXIST       = 20
      X_ERROR                    = 21
      OTHERS                     = 22.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "snd_email
go through this.
Thanks

Conversion of smartform output to DOC format

Hi,
I have a requirement to convert Smartform output to DOC format. Could anyone provide me any direction for this?
SS

Hi SS,
In the link sent by Anki Reddy... you can follow the same but in this FM change PDF to DOC thats it.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'DOC' * Change from 'PDF' * to DOC
MAX_LINEWIDTH = 132
ARCHIVE_INDEX = ' '
COPYNUMBER = 0
ASCII_BIDI_VIS2LOG = ' '
PDF_DELETE_OTFTAB = ' '
IMPORTING
BIN_FILESIZE = W_bin_filesize
BIN_FILE =
TABLES
otf = T_OTF
lines = T_pdf_tab
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
ERR_BAD_OTF = 4
OTHERS = 5
Regards,
sg

Converting Multiple .EPS files into .PDF

Dear Forum: We have tried converting multiple .eps files into PDF using article 325977. This article in Adobe help is really designed to convert .ai files into either .eps or.pdf, our situation is to convert multiple .eps files into PDF. Everytime we run the macro, it simply takes the eps file and saves it as another eps file and does not convert. We have a "Save As" step that we have in the macro that is set to "Save As" PDF, but it still does not work. What are we doing wrong?

Hi mephisto11757,
You can convert the following file types to PDF with the Adobe CreatePDF service:
Adobe Creative Suite® file formats Examples include: .psd, .ai, .indd
Microsoft Word (2000, XP, 2003, 2007, 2010, & 2011) .doc, .docx
Microsoft Excel (2000, XP, 2003, 2007, 2010, & 2011) .xls, .xlsx
Microsoft PowerPoint (2000, XP, 2003, 2007, 2010, & 2011) .ppt, .pptx
Microsoft Publisher (2000, XP, 2003, 2007, 2010, & 2011) .pub
Text Files .txt
Rich Text Format .rtf
Adobe PostScript .ps
OpenOffice Format .odt
Star Office .sxw, .sxi, .sxc, .sxd, .stw
Corel WordPerfect .wpd
Image file formats .gif, .png, .jpg, .bmp, .tiff
Regards,
Florence

Generate Multiple Invoices in One PDF

Hi,
I have requirement whereby I need to generate multiple invoices in one PDF file. I am using Oracle BI Publisher with Oracle APEX 4.0.2
If there is only one invoice that needs to be generated in one PDF file then I already have the solution whereby I print the APEX page item session state values on Invoice Header and get the invoice line items from a SQL Query in my RTF template.
However how to the do the same when multiple invoice needs to be generated in one single PDF file ?
Any pointers will highly appreciated.
Thanks & Regards,
Ashish

asagarwal wrote:
However how to the do the same when multiple invoice needs to be generated in one single PDF file ?It should be pretty straight forward.
Once you've got the query returning multiple rows, then just add a repeating group to your report (if an existing report, just select the section of the document that will repeat -> add-ins menu -> insert repeating group...; or right click selection -> BI Publisher -> Create group...), wherein the column values exist. You can even specify a page break at the end.
By the way, this question is probably more suited for the {forum:id=245} forum.
Ta,
Trent

How do I scan multiple pages into one pdf document on a HP Envy 4501 Printer

My HP Envy 4501 Printer won't let me scan multiple pages into one pdf document.
I went to "Advanced Settings", clicked on "file" and made sure that the check box next to "Create a separate file for each scanner page" was unchecked.
When I clicked the Save button it showed the page that I scanned and showed 1/1. On the right side it had options for changing the brightness and Contrast, Rotate and Crop and "Back", "Save" and "Done" buttons, but nothing about scanning another page.
Not to mention HP's Customer Support is useless!
I'd appreciate any help I can get with this problem.
Thanks,
Mark

Hi BH,
I see your diagram. I just scanned something. The screen that I'm looking at right now shows the preview page and the scroll box to the left of that just like in your diagram. The screen does not show the + button nor does it show the red x button under the scroll box as in your diagram. I can't see the plus sign because it is not there.
I tried re-installing the software and drivers as you suggested but that did not have any affect.
Thank you for trying to help me with this problem but it hasn't worked, therefore I can't mark the reply "Accept as Solution".
I've noticed that on HP's support forum web page there is only 1 solved request for assistance. That doesn't give me much confidence in HP.
Please reply back to this post to let me know if there is anything else that I can try or if you know someone else at HP that can help.
If I don't here back from you, I'm returning this HP Envy 4501 Printer to get my money back to use it to buy a printer from one of HP's competitors.
Thanks,
Mark

Problem with Multiple Page convert in PDF

Hi all,
I done one invoice printing and convert in pdf report. but with smartform i get all thing and giving perfect out put.
But when i give second option for direct create a file of PDF this time only one page can convert in PDF. Means when i give multiple input like print invoice 0000910 to 0000925 so this time only invoice no. 0000925 is convert in pdf. But actually i need all invoice like 910 to 925 convert in one PDF with 25 pages.
And i done coding which is show below for this issue.
so please help me out and kindly guide me what is the mistake in my below code for make multiple page in one pdf.
FORM get_FORM1.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = w_form_name
* VARIANT = ' '
* DIRECT_CALL = ' '
IMPORTING
fm_name = w_fmodule
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
w_cparam-no_dialog = 'X'.
w_cparam-preview = space. " Suppressing the dialog box
                                                    " for print preview
w_cparam-getotf = 'X'.
* Printer name to be used is provided in the export parameter
* OUTPUT_OPTIONS
w_outoptions-tddest = 'LP01'.
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ITABz[]                       = itab[].
ITABz1[]                      = itab1[].
IT_ADDRESSz[]                = it_address[].
LOOP at itab1.
    delete ITABz where vbeln ne itab1-vbeln.
    delete ITABz1 where vbeln ne itab1-vbeln.
    delete it_addressz where KUNNR ne itab1-KUNRG.
*      delete itab1 where vbeln ne itab1-vbeln.
    TOTAL_QNT                  = ITAB1-TOTAL_QNT.
    TOTAL_AMT                  = itab1-TOTAL_AMT.
    I_FKIMG = itab1-I_FKIMG.
    BILL_DATE                  = itab1-BILL_DATE.
    IJ_1ICSTNO                 = itab1-IJ_1ICSTNO.
    VECHICAL_NO                = itab1-VECHICAL_NO.
    TAX                        = itab1-TAX.
    INV_TXT                    = ITAB1-INV_TXT.
    inv_name                   = ITAB1-INV_NAME.
    INVOICE                    = ITAB1-INVOICE.
    TAX1                       = itab1-TAX1.
    TAX_VAL                    = itab1-TAX_VAL.
    TAX_ADD_VAL                = itab1-TAX_ADD_VAL   .
    Text_inv                   = itab1-Text_inv.
    TEXT1                      = itab1-TEXT1.
    TEXT2                      = itab1-TEXT2.
    TEXT3                      = itab1-TEXT3.
    TEXT4                      = itab1-TEXT4.
    TEXT5                      = itab1-TEXT5.
    P_DOCNO                    = itab1-vbeln.
CALL FUNCTION w_fmodule
EXPORTING
          WERKS                      = WERKS
          TOTAL_QNT                  = TOTAL_QNT
          TOTAL_AMT                  = TOTAL_AMT
          I_FKIMG                    = I_FKIMG
          STATE                      = STATE
          LAND1                      = LAND1
          LANDX                      = LANDX
          P_DOCNO                    = P_DOCNO
          BILL_DATE                  = BILL_DATE
          IJ_1ICSTNO                 = IJ_1ICSTNO
          T_WERKS                    = T_WERKS
          VECHICAL_NO                = VECHICAL_NO
          TAX                        = TAX
          TAX1                       = TAX1
          TAX_VAL                    = TAX_VAL
          TAX_ADD_VAL                = TAX_ADD_VAL
          inv_txt                    = inv_txt
          inv_name                   = inv_name
          INVOICE                    = INVOICE
          Text_inv                   = Text_inv
          TEXT1                      = TEXT1
          TEXT2                      = TEXT2
          TEXT3                      = TEXT3
          TEXT4                      = TEXT4
          TEXT5                      = TEXT5
*   ARCHIVE_INDEX              =
*   ARCHIVE_INDEX_TAB          =
*   ARCHIVE_PARAMETERS         =
   CONTROL_PARAMETERS         = w_cparam
*   MAIL_APPL_OBJ              =
*   MAIL_RECIPIENT             =
*   MAIL_SENDER                =
    OUTPUT_OPTIONS             = w_outoptions
*   USER_SETTINGS              = 'X'
IMPORTING
* DOCUMENT_OUTPUT_INFO =
job_output_info = t_otf_from_fm
* JOB_OUTPUT_OPTIONS =
TABLES
        ITAB                       = itabz
        ITAB1                      = itabz1
        IT_ADDRESS                 = it_addressz
     EXCEPTIONS
       FORMATTING_ERROR           = 1
       INTERNAL_ERROR             = 2
       SEND_ERROR                 = 3
       USER_CANCELED              = 4
       OTHERS                     = 5
iF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ITABz[]                       = itab[].
    ITABz1[]                      = itab1[].
    IT_ADDRESSz[]                = it_address[].
ENDLOOP.
t_otf[] = t_otf_from_fm-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
* ARCHIVE_INDEX = ' '
* COPYNUMBER = 0
* ASCII_BIDI_VIS2LOG = ' '
* PDF_DELETE_OTFTAB = ' '
IMPORTING
BIN_FILESIZE = W_bin_filesize
* BIN_FILE =
TABLES
otf = T_OTF
lines = T_pdf_tab
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
ERR_BAD_OTF = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* To display File SAVE dialog window
CALL METHOD cl_gui_frontend_services=>file_save_dialog
CHANGING
filename = w_FILE_NAME
path = w_FILE_PATH
fullpath = w_FULL_PATH
* USER_ACTION =
* FILE_ENCODING =
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2
NOT_SUPPORTED_BY_GUI = 3
others = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Use the FM GUI_DOWNLOAD to download the generated PDF file onto the
* presentation server
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE = W_bin_filesize
filename = w_FULL_PATH
FILETYPE = 'BIN'
tables
data_tab = T_pdf_tab
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
EndFORM .               "get_FORM1
thanks
Keyur
Edited by: keyur chauhan on Aug 30, 2010 11:56 AM
Edited by: keyur chauhan on Aug 30, 2010 11:57 AM
Edited by: keyur chauhan on Aug 30, 2010 12:37 PM

Thank you!
Unfortunately I didn't find any work around.
Thanks,
Federico

Output same Deski report as PDF and XLS

Hello,
will it be possible to generate (not schedule) a Deski - Report using Java SDK ?
desired workflow:
- generate/refresh the report to hold new data (User specific, Local specific)
- output this report in Formats PDF and XLS
- store the output - reports in Users inbox
The goal is to generate the report only once and output the same twice - as pdf and as xls.
As far as i saw in scheduling a report, it is only possible to produce one output (pdf or xls), if we need both, we have to schedule twice. And therefor we will have to generate the same report twice.
I found somthing like
binaryView = (BinaryView)documentInstance.getView(OutputFormatType.XLS);
binaryView = (BinaryView)documentInstance.getView(OutputFormatType.PDF);
in RBean for Webi - reports.
Looking forward for any idea.
Thanks in advance.
Johannes
Edited by: Johannes Kammerer on Sep 15, 2009 4:55 PM

If you're on XI 3.x, then you can specify multi-format exports using Publications.
Otherwise, you'd need to export to a file using REBean SDK, then Enterprise SDK to create a new InfoObject for that artifact.
Sincerely,
Ted Ueda

Outputting multiple docs in 1 PDF

Similar Messages

Maybe you are looking for