Ova template for cucm

hi,
If I use the template for 2500 users, and my cluster with 9 cucm servers, with only 4 of them have callmanager service, does it mean that i can have 2500 x 4 = 10000 phones in my cluster?
I am wondering if we can deploy different capacity of cucm within a cluster, e.g. publisher and subscriber with call manager service deployed using 10000 users template, while those servers without callmanager service deployed using 2500 users template?
thanks.

Technically, if you build no redundancy. Keep in mind that CUCM should be deployed either in 1:1 or 2:1 redundancy model which means for each call processing server there should be backup server or for 2 call processing servers there is 1 backup server. Also, the phone count is marketing term, 2500 phones would be supported if the server does nothing else which is never the case as you will have gateways, trunks, media resources, etc, etc so the count goes down fast. You can use the Cisco sizing tool described in SRND to size your cluster appropriately.
Technically you can use different OVA templates for different servers, but that is never recommended.
HTH, please rate all useful posts!
Chris

Similar Messages

Update hadrware resources for CUCM in UCS

Hello all,
We have CUCM 8.6 running in UCS.
The ova file used before installing CUCM 8.6 on UCS was for less number of resources ( 1xvCPU, 1x80GB, 4GB RAM ).
I need to increase resources of VM, so instead of 1=vCPU & 1x80GB, 4GB RAM i want 2 vCPU and 2 x 80 GB, 6GBM RAM.
If i increase the number of vCPU, RAM & HD from vSphere Client manually, what is the risk in CUCM database, will it effect or it will be safe ?
Is there any way to upgrade the ova file in running VM instead of building new VM with new OVA file ?
Kindly help.
Regards,

Hello bernhardczapp,
We were upgrading CUCM 8.6 to 10.5 but unfortunately it failed with an error saying there is no disk space available, we opened case wtih cisco & we were advised to perform following tasks to free disk space:
Clear the logs is from RTMT tool, download the old log/traces and delete them from the server with this process:
1)      Login to RTMT
2)      Go to Trace & log central
3)      Select Collect File
4)      Select All service checkbox and All server checkbox, click next.
5)      Select a period of time. Select all the time frame for the logs that you do not need anymore, example from January until July. (Also there is a drop down so you can clear the ones from the inactive partition.)
6)      Select the Delete file Checkbox.
7)      Click finish
We followed procedure & after 8 hours it made 6495 MB space free. Before was 36444MB & after process 29949MB.
Reason i mentioned about new ova file for CUCM 10.5 is that while creating VM i will have option to select 7,500 users (this will give me 2x80GB, 2xvCPU, 1x6GB RAM)
I will try installing your suggested cop files & will update you. Do i need to restart Servers after cop file installation ?
But if you have alternate solution please share.
Kind Regards

CCX 8.5 OVA template with 4x 146G HD

Hi guys,
I'm currently in the process of upgrading my client's CCX environment from 7.0(1)SR5 on existing MCS 7835 hardware to CCX 8.5(1) on UCS C-series 210-M2.
The install guide for CCX 8.5 table 6 on page 16 showed that MCS 7845 with 4x 146G HD is supported.
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/installation/guide/uccx851ig.pdf
This is to support a maximum 20G HR DB so that the client can keep 3 yrs worth of historical records.
However when I look in DocWiki to find the appropriate OVA template, unfortunately there isn't an equipvalent one that's available for it.
http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Downloads_(including_OVA/OVF_Templates)#Cisco_Unified_Contact_Center_Express.2FCisco_Unified_IP_Intelligent_Voice_Response_.28IP_IVR.29
All the vDisk on these OVA templates for CCX 8.5 are only for 2x 146G HD.
Does anyone know where I can download the appropriate OVA template for CCX 8.5 with 4x 146G HD?
Or is this a gap that Cisco is not aware of?
Kind regards
Daniel

Hi Daniel,
1. As part of this this upgrade UCCX 7.x to 8.5, the maximum historical data that you can bring it to the new version is either 10GB or 51 weeks of old data. The PUT tool will not allow you to take backup exceeding 10GB of historical data, it will prompt a message saying that you need to purger the oldest data before proceeding with a successful backup.
Please refer the below link for it.
http://docwiki.cisco.com/wiki/Database_size_is_not_supported_during_backup_using_PUT
2. Also discussed with the UCCX development team on the requirement of having an OVA template with 146*4 but as of now its not there.
What that means is you can have a max of 13GB of HR Database with the 146*2 GB HDD's in the currently existing OVA templates for UCCX.
Hope it clarifies.
Thanks,
Anand Choudhari
Please rate helpful posts..

IS CUC 8.6 OVA Template compatilbe for 10.5

Hi,
We have installed Cisco unity connection 8.6 on UCS with 8.6 OVA Template CUC_8.6.2_vmv8_v1.5.ova.
Now am planning to upgrade to 10.5. Will this OVA Template suffice the 10.5 requirements.
Has any one faced this issue...
Any solutions. Pls suggest.

Hi,
The specs of both OVAs are same. When we deploy the same the CPU says 2.53 Ghz, once deployed and after the installations of CUC OS and if we see in VMware hardware or cli login we see 2.50 Ghz.
So this .03 Ghz was cribbing me.
Just ignored and went on for upgrade, no issues observed. CUC was upgraded to 10.5 without any issues.
thanks.

OVM 3.0.3 import VirtualBox OVM Manager 3.0.3 OVA template

VirtualBox Template for Oracle VM Manager 3.0.3,
http://www.oracle.com/technetwork/server-storage/vm/template-1482544.html
The OVM 3.0.3 host should be configured with enough space to accommodate import of OVA template. In
this case 36G was allocated for "sda",
[root@ovm303 ~]# fdisk -l /dev/sda
Disk /dev/sda: 38.6 GB, 38654705664 bytes
255 heads, 63 sectors/track, 4699 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 4189 33648111 83 Linux
/dev/sda2 4190 4699 4096575 82 Linux swap / Solaris
Post OVA import disk usage,
[root@ovm303 ~]# df -T -t ext3
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/sda1 ext3 32594216 24105604 6806208 78% /.
[root@ovm303 ~]# cat /etc/motd
Warning: making manual modifications in the management domain
might cause inconsistencies between Oracle VM Manager and the server.
[root@ovm303 ~]# head -4 /etc/ovs-info
OVS summary
release: 3.0.3
date: 201111300901
build: 123
The contents of "ovs-info" also include package information.
The "vbox-img" package is something new in OVM 3.0.3,
[root@ovm303 ~]# grep vbox-img /etc/ovs-info
vbox-img-1.0-2
[root@ovm303 ~]# rpm -ql vbox-img
/usr/bin/vbox-img
/usr/share/doc/vbox-img-1.0
/usr/share/doc/vbox-img-1.0/COPYING
[root@ovm303 ~]# vbox-img --help
Oracle VM VirtualBox Disk Utility 4.1.3
(C) 2005-2011 Oracle Corporation
All rights reserved.
Usage: vbox-img
setuuid --filename <filename>
[--format VDI|VMDK|VHD|...]
[--uuid <uuid>]
[--parentuuid <uuid>]
[--zeroparentuuid]
convert --srcfilename <filename>
--dstfilename <filename>
[--stdin]|[--stdout]
[--srcformat VDI|VMDK|VHD|RAW|..]
[--dstformat VDI|VMDK|VHD|RAW|..]
[--variant Standard,Fixed,Split2G,Stream,ESX]
info --filename <filename>
compact --filename <filename>
createcache --filename <filename>
--size <cache size>
Download "OracleVMManager3" OVA,
[root@ovm303 xen]# mkdir /etc/xen/ovm303-m
[root@ovm303 ~]# cd /etc/xen/ovm303-m
[root@ovm303 xen]# wget http://download.oracle.com/otn-pub/otn_software/OracleVMManager3.ova
--2012-03-14 17:06:01-- http://download.oracle.com/otn-pub/otn_software/OracleVMManager3.ova
Length: 4234452992 (3.9G) [text/plain]
Saving to: `OracleVMManager3.ova'
100%[====================================>] 4,234,452,992 834K/s in 55m 36s
2012-03-14 18:01:38 (1.21 MB/s) - `OracleVMManager3.ova' saved [4234452992/4234452992]
[root@ovm303 xen]# md5sum OracleVMManager3.ova
75fc334422eda6c3425a2f09fb88f9e0 OracleVMManager3.ova
Unpack OVA,
[root@ovm303 xen]# tar tvf OracleVMManager3.ova
-rw------- someone/someone 59626 2012-01-12 17:42:49 OracleVMManager3.ovf
-rw------- someone/someone 1987182592 2012-01-12 17:48:06 OracleVMManager3-disk1.vmdk
-rw------- someone/someone 2247208960 2012-01-12 17:51:24 OracleVMManager3-disk2.vmdk
[root@ovm303 ovm303-m]# tar xvf OracleVMManager3.ova
OracleVMManager3.ovf
OracleVMManager3-disk1.vmdk
OracleVMManager3-disk2.vmdk
Use "vbox-img" to show "OracleVMManager3-disk1.vmdk",
[root@ovm303 ovm303-m]# vbox-img info --filename OracleVMManager3-disk1.vmdk
--- Dumping VD Disk, Images=1
Dumping VD image "OracleVMManager3-disk1.vmdk" (Backend=VMDK)
Header: Geometry PCHS=16383/16/63 LCHS=1024/255/63 cbSector=52428800
Header: uuidCreation={f3859e00-962c-440f-a63d-feb7b731d5da}
Header: uuidModification={00000000-0000-0000-0000-000000000000}
Header: uuidParent={00000000-0000-0000-0000-000000000000}
Header: uuidParentModification={00000000-0000-0000-0000-000000000000}
Convert "OracleVMManager3-disk1.vmdk" to RAW,
[root@ovm303 ovm303-m]# vbox-img convert srcfilename OracleVMManager3-disk1.vmdk dstfilename OracleVMManager3-disk1.img srcformat VMDK dstformat RAW
Converting image "OracleVMManager3-disk1.vmdk" with size 26843545600 bytes (25600MB)...
[root@ovm303 ovm303-m]# file OracleVMManager3-disk1.img
OracleVMManager3-disk1.img: x86 boot sector; partition 1: ID=0x83, active, starthead 1, startsector 63, 208782 sectors; partition 2: ID=0x8e, starthead 0, startsector 208845, 52211250 sectors, code offset 0x48
[root@ovm303 ovm303-m]# fdisk -l OracleVMManager3-disk1.img
last_lba(): I don't know how to handle files with mode 8180
You must set cylinders.
You can do this from the extra functions menu.
Disk OracleVMManager3-disk1.img: 0 MB, 0 bytes
255 heads, 63 sectors/track, 0 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
OracleVMManager3-disk1.img1 * 1 13 104391 83 Linux
OracleVMManager3-disk1.img2 14 3263 26105625 8e Linux LVM
Partition 2 has different physical/logical endings:
phys=(1023, 254, 63) logical=(3262, 254, 63)
Use "vbox-img" to show "OracleVMManager3-disk2.vmdk",
[root@ovm303 ovm303-m]# vbox-img info --filename OracleVMManager3-disk2.vmdk
--- Dumping VD Disk, Images=1
Dumping VD image "OracleVMManager3-disk2.vmdk" (Backend=VMDK)
Header: Geometry PCHS=16383/16/63 LCHS=1024/255/63 cbSector=20971520
Header: uuidCreation={abc43be0-7a43-4ba2-a205-eaf37184a4d3}
Header: uuidModification={00000000-0000-0000-0000-000000000000}
Header: uuidParent={00000000-0000-0000-0000-000000000000}
Header: uuidParentModification={00000000-0000-0000-0000-000000000000}
Convert "OracleVMManager3-disk2.vmdk" to RAW,
[root@ovm303 ovm303-m]# vbox-img convert srcfilename OracleVMManager3-disk2.vmdk dstfilename OracleVMManager3-disk2.img srcformat VMDK dstformat RAW
Converting image "OracleVMManager3-disk2.vmdk" with size 10737418240 bytes (10240MB)...
[root@ovm303 ovm303-m]# file OracleVMManager3-disk2.img
OracleVMManager3-disk2.img: x86 boot sector; partition 1: ID=0x83, starthead 1, startsector 63, 20964762 sectors, extended partition table (last)\011
[root@ovm303 ovm303-m]# fdisk -l OracleVMManager3-disk2.img
last_lba(): I don't know how to handle files with mode 8180
You must set cylinders.
You can do this from the extra functions menu.
Disk OracleVMManager3-disk2.img: 0 MB, 0 bytes
255 heads, 63 sectors/track, 0 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
OracleVMManager3-disk2.img1 1 1305 10482381 83 Linux
Partition 1 has different physical/logical endings:
phys=(1023, 254, 63) logical=(1304, 254, 63)
Update disk image "/boot" configuration using loopback mount,
[root@ovm303 ovm303-m]# mkdir boot
[root@ovm303 ovm303-m]# kpartx -l OracleVMManager3-disk1.img
loop1p1 : 0 208782 /dev/loop1 63
loop1p2 : 0 52211250 /dev/loop1 208845
loop deleted : /dev/loop1
[root@ovm303 ovm303-m]# kpartx -a OracleVMManager3-disk1.img
[root@ovm303 ovm303-m]# mount /dev/mapper/loop1p1 boot
Update "/boot/grub/device.map",
[root@ovm303 ovm303-m]# cat boot/grub/device.map
# this device map was generated by anaconda
(hd0) /dev/hda
Update "/boot/grub/grub.conf" to use non-UEK kernel to avoid issues with OL5u7 default UEK boot and HVM,
[root@ovm303 ovm303-m]# grep default boot/grub/grub.conf
default=1
Mount "/" logical volume,
[root@ovm303 ovm303-m]# vgscan
Reading all physical volumes. This may take a while...
Found volume group "VolGroup00" using metadata type lvm2
[root@ovm303 ovm303-m]# vgchange -ay VolGroup00
2 logical volume(s) in volume group "VolGroup00" now active
[root@ovm303 ovm303-m]# lvs
LV VG Attr LSize Origin Snap% Move Log Copy% Convert
LogVol00 VolGroup00 -wi-a- 19.06G
LogVol01 VolGroup00 -wi-a- 5.81G
[root@ovm303 ovm303-m]# mkdir root
[root@ovm303 ovm303-m]# ls /dev/VolGroup00/
LogVol00 LogVol01
[root@ovm303 ovm303-m]# mount /dev/VolGroup00/LogVol00 root
Update "/etc/inittab" to boot single user,
[root@ovm303 ovm303-m]# grep id root/etc/inittab
id:1:initdefault:
Update "/etc/fstab" to ignore "/u01" block device mount,
[root@ovm303 ovm303-m]# grep sdb root/etc/fstab
#/dev/sdb1 /u01 ext3 defaults 1 1
Unmount "/boot" and "/",
[root@ovm303 ovm303-m]# umount boot
[root@ovm303 ovm303-m]# umount root
[root@ovm303 ovm303-m]# vgchange -an VolGroup00
0 logical volume(s) in volume group "VolGroup00" now active
[root@ovm303 ovm303-m]# kpartx -d OracleVMManager3-disk1.img
loop deleted : /dev/loop1
The OVM 3.0.3 network bridge configuration uses "bond0" vs "xenbr0".
Configure "vm.cfg",
[root@ovm303 ovm303-m]# cat vm.cfg
# (H)ardware (V)irtual (M)achine configuration
# /etc/xen/xmexample.hvm
kernel = 'hvmloader'
builder = 'hvm'
memory = '4096'
# The number of cpus guest platform has, default=1
#vcpus=1
# PXE boot
#bootloader = '/usr/bin/pypxeboot'
#bootloader = '/usr/bin/pygrub'
# Virtual block device configuration using file:
# dd if=/dev/zero of=/$VM_PATH/$VM_NAME/System.img bs=1M count=$MB
# disk = [ 'file:/$VM_PATH/$VM_NAME/System.img,ioemu:hda,w', ]
# Configuration using physical disk logical volume:
# lvcreate --size ${GB}G --name $VM_NAME $VG_NAME
# disk = [ 'phy:/dev/$VG_NAME/$VM_NAME,xvda,w',]
# CDROM configuration using file:
# disk = [ 'file:/$BOOT_ISO_NAME,hdc:cdrom,r', ]
disk = [ 'file:/etc/xen/ovm303-m/OracleVMManager3-disk1.img,ioemu:hda,w', 'file:/etc/xen/ovm303-m/OracleVMManager3-disk2.img,ioemu:hdb,w', ]
# Domain name
name = "ovm303-m"
# Networking
# Network bridge status:
# /etc/xen/scripts/network-bridge status
# 'bridge' should be proper interface e.g. xenbr0
vif = ['type=ioemu, bridge=bond0']
# boot on floppy (a), hard disk (c), Network (n) or CD-ROM (d)
# default: hard disk, cd-rom, floppy
boot = "cdn"
# Enable HV VNC console
# Uses avaiablle next VNC port $OVM_SERVER_HOST:0 == 5900, :1 == 5901 etc
# Use "xm list -l" to determince VNC port "location"
vnc=1
vncunused=1
vnclisten="0.0.0.0"
vncpasswd=''
sdl=0
# Set the real time clock to local time [default=0 i.e. set to utc]
# Allows Win VM clock to work with UTC on OVM host system.
#localtime=1
Start VM,
[root@ovm303 ovm303-m]# xm create vm.cfg
Using config file "./vm.cfg".
Error: Device 0 (vif) could not be connected. Hotplug scripts not working.
Current bridge,
[root@ovm303 ~]# brctl show
bridge name bridge id STP enabled interfaces
Update "/etc/xen/xend-config.sxp" to enable "network-bridge",
[root@ovm303 ovm303-m]# cp /etc/xen/xend-config.sxp /etc/xen/xend-config.sxp.orig
[root@ovm303 ovm303-m]# diff /etc/xen/xend-config.sxp /etc/xen/xend-config.sxp.orig
165,167d164
< # Enable network-bridge, JAP 20120322
< (network-script network-bridge)
<
[root@ovm303 ~]# service xend restart
Restarting xend...
xend daemon (pid 8848) is running...
[root@ovm303 ~]# brctl show
bridge name bridge id STP enabled interfaces
bond0 8000.002128d5ce86 no pbond0
Start VM,
[root@ovm303 ovm303-m]# xm create vm.cfg
Using config file "./vm.cfg".
Started domain ovm303-m (id=1)
Determine VNC console session,
[root@ovm303 ovm303-m]# xm list -l ovm303-m | grep location
(location 0.0.0.0:5900)
(location 3)
VNC console session. The "oraclevm-template" tools are not run in single user so hostname is "localhost",
[root@localhost ~]# who -r
run-level S 2012-03-23 09:09 last=1
Update "/etc/fstab" for "/u01" mount to use label,
[root@localhost ~]# grep /u01 /etc/fstab
#/dev/sdb1 /u01 ext3 defaults 1 1
[root@localhost ~]# blkid
/dev/mapper/VolGroup00-LogVol01: TYPE="swap"
/dev/mapper/VolGroup00-LogVol00: UUID="2751f1b2-836b-4786-ae71-8b402e0f8503" TYPE="ext3"
/dev/VolGroup00/LogVol00: UUID="2751f1b2-836b-4786-ae71-8b402e0f8503" SEC_TYPE="ext2" TYPE="ext3"
/dev/VolGroup00/LogVol01: TYPE="swap"
/dev/hda1: LABEL="/boot" UUID="8701866e-5ed5-49f7-9597-bb9709d22359" TYPE="ext3"
/dev/hdb1: UUID="5f9a7bef-3a6d-4a83-b288-638537424fa7" SEC_TYPE="ext2" TYPE="ext3"
[root@localhost ~]# e2label /dev/hdb1 u01
[root@localhost ~]# grep u01 /etc/fstab
LABEL=u01 /u01 ext3 defaults 1 1
[root@localhost ~]# mount /u01
[root@localhost ~]# df /u01
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/hdb1 10317828 4250832 5542880 44% /u01
As configured the default run level will be elevated to "5" by the "/etc/rc.local" script. This enables a
console desktop for user "ovm". This is unneeded and will be implemented by VNC session for user
"ovm".
Update "/etc/inittab" to enable full multiuser mode run level 3,
[root@localhost ~]# grep id /etc/inittab
id:3:initdefault:
Disable "/etc/rc.local" run level elevation,
[root@localhost ~]# tail -2 /etc/rc.local
# Disable local forced runlevel 5, JAP 20120404
#telinit 5
Disable firewall to allow VNC connections,
[root@localhost ~]# chkconfig --list iptables
iptables 0:off 1:off 2:on 3:on 4:on 5:on 6:off
[root@localhost ~]# chkconfig iptables off
[root@localhost ~]# chkconfig --list ip6tables
ip6tables 0:off 1:off 2:on 3:on 4:on 5:on 6:off
[root@localhost ~]# chkconfig ip6tables off
Reboot,
[root@localhost ~]# reboot
Broadcast message from root (pts/0) (Mon Apr 2 09:22:17 2012):
The system is going down for reboot NOW!
Post "oraclevm-template" configuration e.g. defining FQDN and static IP addresss etc. OVM Manager 3.0.3 is up.
Configure VNC for "ovm",
[root@ovm303-m ~]# su - ovm
[ovm@ovm303-m ~]$ vncserver
You will require a password to access your desktops.
Password: Welcome1
Verify: Welcome1
xauth: creating new authority file /home/ovm/.Xauthority
New 'ovm303-m:1 (ovm)' desktop is ovm303-m:1
Creating default startup script /home/ovm/.vnc/xstartup
Starting applications specified in /home/ovm/.vnc/xstartup
Log file is /home/ovm/.vnc/ovm303-m:1.log
[ovm@ovm303-m ~]$ vncserver -kill :1
Killing Xvnc process ID 12499
Update "xstartup",
[ovm@ovm303-m ~]$ cat /home/ovm/.vnc/xstartup
#!/bin/sh
# Uncomment the following two lines for normal desktop:
unset SESSION_MANAGER
exec /etc/X11/xinit/xinitrc
#[ -x /etc/vnc/xstartup ] && exec /etc/vnc/xstartup
#[ -r $HOME/.Xresources ] && xrdb $HOME/.Xresources
#xsetroot -solid grey
#vncconfig -iconic &
#xterm -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" &
#twm &
[ovm@ovm303-m ~]$ vncserver
New 'ovm303-m:1 (ovm)' desktop is ovm303-m :1
Starting applications specified in /home/ovm/.vnc/xstartup
Log file is /home/ovm/.vnc/ovm303-m:1.log
Configure "/etc/sysconfig/vncservers",
[root@ovm303-m ~]# chkconfig --list vncserver
vncserver 0:off 1:off 2:off 3:off 4:off 5:off 6:off
[root@ovm303-m ~]# chkconfig vncserver on
[root@ovm303-m ~]# chkconfig --list vncserver
vncserver 0:off 1:off 2:on 3:on 4:on 5:on 6:off
[root@ovm303-m ~]# tail -2 /etc/sysconfig/vncservers
# Start VNC session for ovm, JAP 20120404
VNCSERVERS="1:ovm"

Thanks Jim - looks great!

Can not add intercom button to phone template in cucm 8.5

For some reason I can not add the intercom button to phone template in cucm 8.5

Hi Matthew,
You may be seeing this (it's older info);
Intercom Support for Cisco Unified IP Phones
Cisco Unified IP Phone Model
SCCP
7931
7941
7941G-GE
7942
7945
7961
7961G-GE
7962
7965
7970
7971
7975
You can check your version;
Intercom Support for Cisco Unified IP Phones
The list of devices that support the Intercom feature varies per version and device pack.
Use the Cisco Unified Reporting application to generate a complete list of devices that support the Intercom feature for a particular release and device pack. To do so, follow these steps:
1. Start Cisco Unified Reporting by using any of the methods that follow.
The system uses the Cisco Tomcat service to authenticate users before allowing access to the web application. You can access the application
–by choosing Cisco Unified Reporting in the Navigation menu in Cisco Unified Communications Manager Administration and clicking Go.
–by choosing File > Cisco Unified Reporting at the Cisco Unified Real Time Monitoring Tool (RTMT) menu.
–by entering https://:8443/cucreports/ and then entering your authorized username and password.
2. Click System Reports in the navigation bar.
3. In the list of reports that displays in the left column, click the Unified CM Phone Feature List option.
4. Click the Generate a new report link to generate a new report, or click the Unified CM Phone Feature List link if a report already exists.
5. To generate a report of all devices that support Intercom, choose these settings from the respective drop-down list boxes and click the Submit button:
Product: All
Feature: Intercom
The List Features pane displays a list of all devices that support the Intercom feature. You can click on the Up and Down arrows next to the column headers (Product or Protocol) to sort the list.
Cheers!
Rob

CVP 8.5(1) .ova template

All, we're implementing CVP 8.5 on UCS B series and trying to download the ova fiile. On the download website I'm only seeing 8.0(1) ova template. Can anyone please confirm if this also support CVP 8.5 since I also read the following statement:
'Updated page to note that CVP 8.5(1) features the same level of support for virtualization that is available in CVP 8.0(1)"
I really appreciate if someone can please clarify.
Thanks.

Yes, the same 8.0.1 OVA template will work for CVP 8.5 installation. The statement you read actually interprets to that only.
http://docwiki.cisco.com/wiki/Virtualization_for_Unified_CVP#Updates_to_this_Page
Pls rate the post if it helps.
GP.

Dynamically set template for Print Quote report

We need to customize "Print Quote" in Quoting
As part of this we will be having 2 custom templates (will be related to data definition "Quote Printing", ASOPRT).
These two templates have to be defaulted based on the quote status - one for status "Approved", and the other template for other non "Approved" statuses.
How can this be achieved dynamically? (OAF CO customization / personilization)
There doesn't seem to be any setup for assigning different templates based on status.
Profile option "ASO: Default Layout Template" can be utilized to change the default template, but we need this template to be defaulted dynamically based on the Quote status.
Thanks,
Sumanth
Edited by: user1131947 on Oct 25, 2011 3:51 AM

If you want to create a custom report using concurrent program then refer:
http://apps2fusion.com/apps/apps/63-xml-publisher-concurrent-program-xmlp
If you want to create a custom report using OAF page then refer:
http://apps2fusion.com/at/51-ps/260-integrating-xml-publisher-and-oa-framework
-Anand

How to use one WAD template for all the available queries

Hi,
I have created a WAD template... Now we have close to 25 queries which will use that template for displaying their output at Portal...
Is there any way that i don`t have to create multiple copies of my WAD template...
I.e. all queries would call that same template through portal...

Hi,
The Bex report uses the Standard Template 0ANALYSIS_PATTERN while it is executed.
So if your sure that the look and feel of all the Reports is going to remain same, you don't need to even attach all these Queries to Templates in WAD.
When you execute the BEx query, it would pick up the standard template and run it in portal.
But if you want to customize the Report Template:
1) You can change this standard template 0ANALYSIS_PATTERN and customize it according to ur requrement in WAD.
2) Or you can create a copy of this standard template and change it as required. Then change the template in spro (transaction RSCUSTV27) to point to this Z template.
Let me know if you need more details.
Regards,
Forum

How to crate a page template for multiple page instances?

Hello,
When I use the Administration Portal to create a page with portlets in the Portal Resource Library, I can choose to use that page it in my portal. The problem is that I can use it only once. How can I crate a page template with portlets so I can use use it as a template for many page instances in one portal?
I'm using Portal 8.1.6.
Regards,
Eirik

Hey Dave, See the image below:

Error while updating phone button template in CUCM 8.6

Experts,
I'm getting following error while updating phone button template in CUCM 8.6;
Update failed. java.sql.SQLException: System catalog (sysprocbody) corrupted.
Please check the screen shot attached here with.
What could be the reason?
Thanks
Vivek

I'm not a Cisco employee, so I can't do anything with your backup.!
You need to take a backup as a precaution (You should have been doing this anyway) Then you need to call Cisco TAC to get the underlying problem fixed. CalManager is a locked-down environment, and only TAC can get the low-level access needed to fix database problems.
GTG

Oracle Sesame Adaptater - missing template for creation of a new SAIL repo.

Hi,
I'm trying to deploy the Sesame Adaptater on my TOMCAT server.
At the point 8.9 of the doc ( http://docs.oracle.com/cd/E18283_01/appdev.112/e11828/sem_sesame.htm#BABFFEFA) I'm suppose to type in the sesame console the following comand :
"create oracle."
I got this error :
ERROR : No template called Oracle found in C:\Users\<Username>\AppData\Roaming\Aduna\OpenRDF Sesame Console\templates
By reading the Sesame doc and according to this page (http://www.openrdf.org/doc/sesame2/users/ch07.html) I suppose that I have to add in the "C:\Users\<Username>\AppData\Roaming\Aduna\OpenRDF Sesame Console\templates" directory a file based on this template :
# Sesame configuration template for a main-memory repository
@prefix rdfs: <http://www.w3.org/2000/01/rdf-schema#>.
@prefix rep: <http://www.openrdf.org/config/repository#>.
@prefix sr: <http://www.openrdf.org/config/repository/sail#>.
@prefix sail: <http://www.openrdf.org/config/sail#>.
@prefix ms: <http://www.openrdf.org/config/sail/memory#>.
[] a rep:Repository ;
rep:repositoryID "{%Repository ID|memory%}" ;
rdfs:label "{%Repository title|Memory store%}" ;
rep:repositoryImpl [
rep:repositoryType "openrdf:SailRepository" ;
sr:sailImpl [
sail:sailType "openrdf:MemoryStore" ;
ms:persist {%Persist|true|false%} ;
ms:syncDelay {%Sync delay|0%}
Do anyone have the correct template ?
I didn't find any other thread about this problem, so I supose it's an easy issue to solve, but the Semantic Technologies are totally new for me.
Arthur

I finally find the answer to my question. The template used in the tutorial is present in the sesame adapter.
I just had to extract the files into the "sdordfsesame.jar", the template is locate in "sdordfsesame.jar/org/openrdf/console/oracle.ttl".
After adding the "oracle.ttl" to the correct directory, it's work fine.
Arthur

Reseting page number in Word RTF template for BI Publisher PDF generation

Hi!
Apex 4.0.2, Oracle 10.2.0.4, BIP 10.2
Bills are created based on Word RTF file with BI Publisher. Reszulting file is one big PDF file, which has many pages.
Word RTF template is grouped on BILLS.ID field with page break option. So one BILLS.ID may have one or many pages (according data).
How to create RTF template (for PDF BI Publisher generation) with reseting page numbers when grouping value change.
Page numbers are in footer in format
curr_group_page/total_group_pages
where:
curr_group_page is current page number in group (defined with BILLS.ID field),
total_group_pages is total page number of pages in group (defined with BILLS.ID field).
I need to reset numbering whenever BILLS.ID (group) change.
Example:
ID=1 (4 pages)
1/4, 2/4, 3/4, 4/4
ID=2 (1 pages)
1/1
ID=3 (2 pages)
1/2, 2/2
ID=4 (3 pages)
1/3, 2/3, 3/3
etc.
How to achieve that kind of numbering?
Any help appreciated.
Regards,
Damir Vadas
Edited by: Damir Vadas on May 16, 2011 12:49 PM

Simple question.. Does your posting deal with an APEX issue or a BI Publisher issue? The posting you have deals with the RTF add-on for Word that builds report layouts for BI Publisher. I suggested in my response that you move it to a more relevant forum..
If you feel that me alerting you to the fact your are VIOLATING forum policy is an issue, please feel free to ask others their view.. (posting to a 3 year old closed thread, creating MULTIPLE threads for a single issue..) You do NOT seem to get the idea that posting this in the Bi Publisher support forum would probably get you a BETTER response than here.. Asking pl/sql questions here will also get people to refer your questions to the PL/Sql Support forum..
Also, here is a POSSIBLE answer from the BI Publisher Forum: http://forums.oracle.com/forums/thread.jspa?threadID=594805
This Is The APEX SUPPORT forum, we deal with SUPPORT questions on APEX (Application Express)..
Thank you,
Tony Miller
Webster, TX
You know, I used to think that it was awful that life was so unfair. Then I thought, wouldn't it be much worse if life were fair, and all the terrible things that happen to us come because we actually deserve them? So, now I take great comfort in the general hostility and unfairness of the universe.
If this question is answered, please mark the thread as closed and assign points where earned..

Creating Parameters in RTF Template for BI Publisher Report

hi,
I have created Parameters in my BI Publisher Report and in SQL query. But i need to create same parameters in RTF Template , so that when i publish this report in dashboard , parameters will be visible. Can you please tell me how to create Parameters in RTF Template for BI Publisher Report ? I am not finding option. Please let me know .
Thanks in advance
Gayathri.

all the parameter's value will be there in your xml .
just you need to add parameter heading and corresponding xml tag name to get the parameter value on the report.
if u dont have you can try like below
https://blogs.oracle.com/xmlpublisher/entry/get_your_parameters_here_guv
Declare Parameter in RTF Template
Before you use the parameter in the RTF template file you need to declare it first. You can do so by having the following syntax.
<?param@begin:%parameter_name%?>
Note: where %parameter_name% is the parameter name that you have created at the BI Publisher Server UI.
Here is an example:
<?param@begin:param1?>
Use it in RTF Template!
Once it’s declared in the RTF template you can start using it as the same way you use the variable. You need to just add ‘$’ prefix in front of the parameter name. Here is the example:
<?$param1?>
The above example would print the parameter value in the report output. If you want to use this value in your condition or calculation you can simply use it as ‘$param1’. Yes, it’s that simple.
If you are not sure if and how the parameter values are passed to the report when you run the report you can use this command in your RTF template, which will return all the parameter values passed to the RTF template at the runtime.
<?xdoxslt:getXDOProperties($_XDOCTX)?>
http://kirti-bi-solutions.blogspot.com/2009/06/passing-parameters-from-obiee.html

Fix Cheque position in RTF Templates for AP Payments R12

Hi,
I created rtf template for check printing. I have to print invoices details first and after that check at the bottom of the page. I need to print invoices on the cheque page only when total invoice count < = 3 which I am able to control. I am facing issue when for 3 invoices the table height is variable, depends on invoice description this table size is changing. How I can give the fixed-height for invoice table or how I can specify exact place for check (at the bottom of each page )
Thanks
Mital

Hi Prakhar,
Please note the cheque is not an image its in a table.
Even if I fix a table using table positioning in the output it doesnot print at the fixed position which I have provided in my RTF.
Please let me know if you would want to see the sample XML Data and RTF that I have created which can be easier to debug.
Thanks for your help,
Mital

Ova template for cucm

Similar Messages

Maybe you are looking for