Over the last week, my external hard drive is not seen by mac, over the last week, my external hard drive is not seen by mac
My laptop is Macbook Pro and I used to use an external hard disk, which used to work fine with me. However, over the last week, the Mac system started not to recognize the hard disk and accordingly does not see it.
Any solutions / suggesions?
Regards
Did you test your external hd in another machine? did you test with another cable?
I don't know if its helps, but try to reset the PRAM.
Similar Messages
-
I wanted to move my home folder to an external drive. I created a new home folder and in advanced options I moved it over. I didn't however move my files over first, my bad. Now I can't see the hard drive on my mac mini. Is it possible to reverse it or get access to the old home folder and is it possible to still use the mac mini's internal hard drive for storage? How do I find my shared folder, it was on the internal drive. I'm new to macs as you might have guessed at this debockle. Can anyone help?
I'm using Mavricks. I wanted to move my home directory to an external and went into sys prop/users/advanced options and moved the folder ok. Being a noobie on Macs I didn't copy my data and such. So my settings were all new. Basicly now I don't see the internal drive on my mini. There is a lot of strage I'm not able to access. The internal drive doesn't show up. How can I put a folder back onto it so it shows up?
-
I just bought a mac mini over the weekend. I saved items from my old G4 to an external hard drive. I go to plug in the external hard drive and the new computer is not recognizing it. Help.
Here is the information I have. The external hard drive is a 120GB Acomdata. It has both USB and Firewire. When I go to plug in to the mac mini through USB, it is not being recognized. When I switch to Firewire on the old computer I can see it, however when I go to USB it is not being recognized (even on the old computer).
I'm at a loss as to what to do. Any advice would be helpful.Shalese wrote:
Have you ever tried the FW 400 to 800 adapter?
I have used them on multiple occasions and they work just fine.
Try this (maybe you already have):
-Boot Mini with drive disconnected.
-Do not connect drive but turn it on
-wait a few seconds for drive to spin up
-plug cable into the Mini then into drive.
This is an old drive and may have some timing
issues.
I had an Acomdata drive a long time ago. It
worked fine with FW but USB was flakey. -
when i click on my external hard drive the screen goes dark and a msg pops up saying i have to shut down my computer by holding the power button and then restart it. when i do that i get the same result every time. it worked perfectly last night..
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Ifou don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway. -
My new external hard drive appears in Finder, but none of the files stored on it show up in recent documents (today/yesterday/past week).
what format is the external drive? How is it connected?
The drive must be formatted Mac OS extended (journaled) - if it is try Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - from the resulting first aid window repair permissions and if necessary rebuild your database
Note that multiple libraries is not necessary and is generally a bad idea.
LN -
I tried moving images from lLR3 on my
into an external hard drive in order to free up some space on the mac. something went wrong. ater all the images were moved there is still no added room on my mac, but the folder with the images reads 0. please helpThe folder on your internal drive, as viewed in LR, should read zero photos.
The new folder on your external drive, as viewed in LR, should contain the proper number of photos.
I don't know why the internal drive doesn't have extra space now -
QUESTION.
Hallo , my question is ;whenever I delete a photo and restore it through Time machine and Western digital external hard drive , I am able to restore the photo but not the titles and descriptions . Western Digital inform me that it isn't their external hard drive problem and suggest that it is an Apple software problem ?
I am using a Macbook 4.1 , with Mac OSX 10.5.8 . I photo 7.1.5 , last modifie4d 01/05/2010 -universal . Should I be upgrading Iphoto ?
I hope that someone is able to help in this matter , as i have to restore 12000 photos !
Thanking you in anticipation.
Alan from WigtonHallo Kieth ,
I am not quite ready to restore the full iphoto library , as I have days of work re - imputting titles,descriptions and enhancement . I hope that your suggestion works , as I use my Macbook basically to work with digital photography. Through time , I will need to delete my library to recover more disc space and I would hate to have to spend more time re - imputting titles and descriptions all over again .
Thanks for your interest and advice.
regards - Alan -
So I am really stressed out right now.
I have a macbook pro, with a 750 gb hard drive in it. My internal hard drive filled up a while back so I bought a 3TB external hard drive. I backed up my files onto my external a while ago, but I don't really remember how... There is a folder on my hard drive that is called " wd smartware.swstor" , and inside that folder is about 1.7 TB of files (when I click 'get info')... So I'm guessing that is where all my stuff is being backed up. But I also moved files from my computer onto that hard drive, like pictures and videos, that I wanted to delete off my internal... So I may have duplicates?
But my 3TB hard drive is almost full, it has 400GB free on it. And my 750gb internal hard drive on my macbook pro, has filled up again so it only has 10gb free space. So basically I have almost 3TB of files on my external hard drive, and 740gb on my internal.. This can't be right. There is no way I have this many files. I am guessing I have some of the same files on my internal that I do on my external.. Most of my files are high quality HD video files that I imported through final cut pro x....
So I bought another 3TB external hard drive that I haven't used yet. Basically, I just want to move all my files that are on my internal hard drive (roughly 750gb) onto my NEW external 3TB hard drive- and then delete the files off my internal so I have more free space. I just don't know if these files are already being backed up on my OLD external 3TB hard drive.
Can someone please help? Thank you!craigbuckley wrote:
If I get rid of my TIme Machine, will I lose all my files from the past?
Yes it will unless you back it up first out of TM.
TimeMachine is a self rotating image of your boot drive with saved states, it manages itself based upon the available space on the drive. As new states are created, old ones are deleted along with older versions of your files.
Also if you incur a drastic large change to your boot drive, TimeMachine will DELETE older versions of your files.
TimeMachine is not a archival solution!
To rescue yourself from TimeMachine, you will first need to save the recent copy of file(s) to the new 3TB, then restore the older version of the file from TimeMachine to the boot drive and then rename it/date it and save that older copy to the new 3TB drive.
This way you have both the new copy and the old copy of the file pernamently archived on the new 3TB drive.
Once you have exhausted all of TimeMachines older files, you can free yourself from it, erase the drive.
For your needs, I suggest this.
Internal drive and bootable clone
1: Your internal 750GB boot drive contains active working files.
2: You have another external drive that's either 750GB or 1TB, you use Carbon Copy Cloner to make a bootable clone of your boot drive, update it when you know you have a stable OS X system on your boot drive and before updates or changes, this way if the update goes bad and the machine will not boot. You can connect the clone, hold the option key down and boot the comptuer from the clone. You then can get online to get help, or simply reverse clone your software problems away.
CCC has the ability like TimeMachine to save states between clones, it's on be default but you can turn this off as to maintain a pure clone, this is what I advise you do as to avoid confusion. You clone is a perfect copy since the last update of the clone, which you can setup to do nightly if you wish or every few days or every few weeks, whatever.
Your bootable clone is your lifesaver if your boot hard drive dies or refuses to boot up, you can boot from the clone in seconds and only be slightly off since the last update of the clone. TM won't run the computer like a clone will.
I highly adise keeping your clone in a very safe place, away from theft, fire, electrical, etc.
http://www.bombich.com/
External Storage Drives
3: Your first external 3TB drive (sans TimeMachine) will be your storage drive, this will contain any files that you don't wish to have on the internal drive and as a result also not on the clone.
You maintain folders that are dated, with older copies of files in those folders if you wish. This way you can control the space on the drive and not make multiple duplicates of all the large files like TM does.
For instance if you work on a 100GB project for three days, instead of having three copies taking up 300GB like what TM does, you can rather choose to have just one older copy at 100GB. You can decide you don't need a particular older version of a file and remove it, thus managing your drive space yourself.
4: Your other external 3TB is a Carbon Copy Cloner backup of the first 3TB, maintain a perfect clone of that as well and update it periodically as your needs change. Since CCC can be schedualed and works in the background, you can have it update your clones overnight or another time your not using the machine. This free's up performance as TM isn't running in the background while your trying to work.
Also with no TM local cache file, that also will free up space on the boot drive.
The general rule is you need both hardware AND software protection for your data, thus with too much data to fit on the boot drive, you need a external storage drive and then a backup of that as to maintain TWO hardware copies of your data at all times.
This method is also scaleable, if you need more room than 3TB externally, you then get another 2 3TB drives, one for the new data and one for backup.
The bootable clone of your bootdrive is kept in a very safe place, it's designed to protect your OS X investment in software etc. and espectially, to get your Mac booting in as short as a time as possible while you plan on a replacement boot hard drive/repair.
Read more about the advanced options bootable clones give here.
Most commonly used backup methods
With your large storage needs, you basically have outgrown TimeMachine by hitting the hardware limit of drives.
If there were 10-20TB drives, you likely could keep on going with TimeMachine, but you can't.
Your clearly in the more "professional" catagory with your storage management needs, not in the TM "newbie to computers" where it's managed for you.
If your finding your needs are going to exceed 6TB, you might want to consider a external hardware RAID 5 box with 5+ drives, they will self redundancy so if a drive dies you just switch it with a new one and the missing data is copied from the other drives.
https://en.wikipedia.org/wiki/RAID
http://www.macgurus.com/
Good Luck -
I have a macbook air and I am having an issue with space.
When I rent a movie most times I rather just buy it because its sometimes only a few extra dollors more but im having the space issue.
If I transfer my itunes files to an external hard drive will I be able to delete the movies off my computer after so I dont have a 100% full hard drive, and if I delete the files off my itunes on my computer will I come to a problem when I plug in the external hard drive and go to watch them?
please help!!
thank you so much!If you have a router with a USB port (I have the AirPort Extreme with a USB port, for example) you can hook up just about any hard drive to it and have it recognized on the network. But first I would consider what you want your backup scheme(s) to actually do... personally, I use three backup schemes - I've two Time Machine drives to backup my internal drive, I've three clones of my internal drive, I've one clone of my Thunderbolt 2TB 'working' drive, and I regularly backup to dual-layer DVDs (not full backups, just archived material).
So you need to use one or more backup schemes - at least two for your internal drives (Time Machine and a clone) and one for archival purposes. A Time Capsule would be perfect as a wireless Time Machine backup and you can purchase a small (well, at least the size of your internal drive) external drive to make a clone copy. Time Machine offers incremental backups (a plus when you want to go 'back in time' - at least to a time within the space limitations of your Time Capsule) while a clone gives you a 'snapshot' of your internal drive from the last time you cloned. Both have their advantages, which is why I suggest using both. For purely archival purposes, however, I use DVD - I've been doing this for over a decade now and haven't had one fail yet.
So those are your basic options - a Time Capsule would work great for wireless Time Machine backups, but i would also keep a clone and use DVDs for archiving data.
Good luck,
Clinton -
When I plug in my Lacie (thunderbolt) External Drive it doesn't show up on the desktop. I need to move some stuff out of my hard drive to make room. I have very little room left on the hard drive and need to move an iPhoto library.
i have a lacie, and i encrypted it. i had to wipe it, because it kept dropping off over and over and re-logging in. so unencrypted i went.
at some point it wasn't recognized at all. sometimes disk utility would open it, but then it got to the point that it wouldn't recognize it either.
i hadn't realized that the power supply was dysfunctional. but i was able to recover it using disk warrior at the last deep breath it took. the disk itself still works, but not in that housing. -
just got Prosoft drive genius 3 software, and it's telling me that the external hard drive that i am using for my time machine back up drive needs to be defragmented. is it wise to do this or should i not??
Let's hope a couple things: that you have bootable clones of your drives also; that the backup drive for TimeMachine has over 3x capacity of the data you plan and are storing. I would also switch TM backup drives so you have a 2nd.
Fragmented free space affecting performance happens when the drive is too full which may mean there isn't enough free space for a full backup set.
1.5TB for backing up 500GB, while WD Green 3TB is $140 and WD Black 1.5TB is, about the same price.
I'd be worried about the integrity and directory, and whether you can afford to lose that drive. Defragging is also a very slow operation. the ideal: to just clone a drive, or start over with another drive and wait. cloning TM volumes has not been done or has it? SuperDuper hoped to but I don't think they or Bombich's CCC made it there.
Trouble with highly fragged is when free space gets to 20% normally, 1/3 or so though for TM volumes, and finding where and a chunk of space for the file being written. Does TM use large spare image files of like 2GB?
Best would be to ask in the TimeMachine section Snow Leopard
https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard?view= discussions#/?tagSet=1009
where there are some good FAQ and tutorials, and people that know the ins-and-outs and shortcomings. -
The drive stopped showing up consistently at first, then stopped all together. Disk Utilities could see it, verify it but not repair. I need it backed up. I took it to a local computer shop who tried a different cord. Nothing. When I got home, I read through several support forums dealing with this issue. One said I needed to zap my PRAM on my MacBook. I did so. Now the external won't even turn on! Any hope of getting the data off that drive? It is still under warranty but undoubtedly the firm will NOT attempt to back up the drive before issuing a new one. I downloaded something called TestDisk 6 that another forum suggested but no one offered any clue how to use it. I cannot figure the first thing to do with it! It appears to may be a Windows formatted program, anyway as most of the instructions end in the suffix .exe. I'm at a total loss...both personally as well as having already lost a complete week of business. Any suggestions would be appreciated but please note - I am NOT that computer literate. Just telling me to download something won't help me if I can't figure out what to do once it is downloaded. Also, taking this hard drive apart will void my warranty. Not that that is the biggest of my worries at this point but I wouldn't have the first clue anyway! I live in an area where we have something called Mac Authority in the mall and a Best Buy. Those are the only 2 connections to Mac-related stuff I have access to. Help!!! Please?
If your external drive does not have an independent power supply, you may wish to consider a couple of lower-cost options before tossing the drive. Bus-powered drives have no external power source and must get all their power from the computer. They can exceed the computer's USB energy budget.
Cheapest option:
1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
This gets power from two of the computers USB porst sna can provide enough power to wake up an under-performaing bus-powered drive.
If you don't have enough ports to use this, try the next cheapest option:
Newer Technology 7 Port Hi-Speed USB 2.0 Hub with Power Adapter for Mac & PC
Such a hub has a an independent power supply to make up for wahat the comptuer fails to provide. -
IS it possible to share external hard drive Mac To Mac, over a PC network,
I would like to explain this situation in it's own post so it's clear. I am at my brother's house (PC user) and both my wife and I are Mac users who are on the network. I have an external hard drive which is plugged directly into my wife's Macbook. I am trying to access it from my Macbook pro. This is my first time sharing and this is what I have done:
I went into "sharing" on her Macbook and turned file sharing on.
I added the mounted drive as a 'shared folder' and made everyone able to read and write.
Under 'options' I checked all of the boxes, including AFT, SMB and FTP (was I suppose to do this?)
Now, when I am on my Macbook Pro I look at the network and I see the PC network server, and her Macbook there (along with another weird network folder called "Mac001ff3cdf6ff", which I'll get to in a minute)
When I click on her computer and connect, I see the folders there which I've previously been able to share.
However, there is no external drive to be seen, even though it is mounted on her desktop of her Macbook downstairs.
When I go back and connect to this strange network folder called "Mac001ff3cdf6ff", however, I see again all the folders that I see when I click on my wife's Macbook folder AND the external hard drive..which is great...BUT, why can't I see this when I click on her Macbook folder? I did notice too that the icon is a PC icon for "Mac001ff3cdf6ff" when I click on 'more info, says "PC server".
Does this mean that the only way for me to access the external hard drive is through a PC server and this is the 'long way around' to get into the external drive? And why can't I connect directly from my wife's Macbook icon in the network folder?
Help please! Thank you. I hope this is more clear.Is there anyone out there who has had success with sharing an external hard drive over a network from Mac to Mac? I just can't figure this out! It's so weird. When I look in the network places I see the icon for my wife's computer, and the PC ones of my brother in law's drives connected to the network. And ONE of those PC icons (you know, the one with the blue screen of death on them?) is labeled with "mac934ffsg" or something similar. I've been experimenting and when I add the hard drive in "shared", or if I add another folder in 'shared' on her computer it is THIS icon in the network that is updated.
Does anybody come close to my situation? Is there anyone sharing a couple different Macs over a network set up with PC's?
This is driving me batty... -
In FCP X How do I capture tape-based media (hdv clips)- which I want to import-to my external hard drive? There is only one firewire 800 port on the back of my I mac. The FCPX manual says to import tape footage directly into final cut, which works, but then I lose my external hard drive Do I have to import it into an event, then copy it over to an external hard drive? On Larry Jordan's tutorial, he has 3 external hard drives that show up on his monitor WHILE he imports his tape based media. How is that done? I can only get either the camera to appear OR my external hard drive. thanks for your help.
Thanks for your response, but that doesn't solve the problem. Yes, the LaCie hard drive has 2 firewire ports-
I have always done what you suggest (works fine in FCP7), but in FCPX when I do that the camcorder icon
does not appear. It only shows up when I DIRECTLY import the footage via firewire. ???? -
I purchased a macbook air about 5 months ago and lately i keep recieving a warning that the hard drive or disk is full and that I will need to move items to trash in order to free up space on it. I purchased a external hard drive 1 TB but I'm very new to mac and ios and unsure as to how I'm suppose to transfer my files (video, pics, music etc.) from my mac over to the external hard drive in the correct way so I won't end up deleting them permenately or screwing anything up with my mac as far as the applications and programs being able to run. Am I supposed to just copy to the external hard drive and then move to and empty the trash? That's pretty much all I could come up with, but then what if i need or want to access that file again at a later time. Also, I have an i Phone and i pad so with i cloud it automatically syncs all my purcheses and if i delete something from itunes on my mac it deletes from my ipad.
I'd appreciate any kind of input i think im just a little lost here. I have to say i love my Mac and wouldn't trade it for anything (except maybe a macbook pro w/more memory)... Is there something I'm missing???To free up hard drive space the best bet is to move data files that you don't need access to all the time. Likely candidates are music, video, and photos. Things like word processing and spreadsheet files can also be moved but they tend not to be very large and so don't free up much space. The problem with moving the above mentioned files is that iTunes and iPhoto need to know where the files are stored.
Here's an article explaining how to move the iTunes folder. You can move the iPhoto library using the Finder but there is a slight complication. Start iPhoto, open the Preferences and click on the Advanced tab. The first option is "Copy items to the iPhoto Library". If this option is checked, copy the iPhoto library to your external folder (drag it from the Pictures folder to your external drive) and then delete it from your Picture folder. If this option is not checked, it is a bit more complicated and we'll need to talk a bit. -
Me compre un ipod classic de 160gb cada vez que trato de ponerle musica de mi disco duro externo solo copia hasta 1500 canciones y luego me congela el Itune y no lo puedo cerrar, me pide que restaure el ipod como de fabrica, lo hago y nada. Trato de cerrar el programa de itune y no me deja, trato de apagar el computador y no lo puedo apagar, he buscado para ver si tiene errores el disco del Ipod y me dice que esta bien. Lo he restaurado como 8 veces y le he puesto musica y videos pero siempre me borra todo. He aplastado Menu y Seleccion para entrar al sistemade diagnostic o del ipod y le pongo el test manual donde entro al IO y me dice q todo esta bien. Le he dado ya varios Format directamente desde el Windows 7 y nada tampoco, siempre me borra todo desde que pasan mas de 1300 canciones y me congeal todo el equipo. Ya no se que pensar de esta compania Apple porque no da ninguna solucion ha este tema.
I bought a 160gb iPod classic every time I try to put music on my external hard drive only copy up to 1500 songs and then freezes Itune me and I can not close, asks me to restore the ipod as factory, and do nothing . I try to close the program and itune will not let me, I try to turn off the computer and I can not shut, I looked to see if the iPod disk errors and says it's okay. I restored it about 8 times and I've put music and videos but I always delete everything. I crushed and Selection Menu to enter diagnostic sistemade or ipod and I put the manual test where I enter the IO and q tells me everything is fine. I have already given several Format directly from the Windows 7 and anything either, I always delete everything from passing over 1300 songs and I congeal whole team. No longer have to think of this company because Apple gives no solution has this issue.06-sep-2012 0:14
Me compre un ipod classic de 160gb cada vez que trato de ponerle musica de mi disco duro externo solo copia hasta 1500 canciones y luego me congela el Itune y no lo puedo cerrar, me pide que restaure el ipod como de fabrica, lo hago y nada. Trato de cerrar el programa de itune y no me deja, trato de apagar el computador y no lo puedo apagar, he buscado para ver si tiene errores el disco del Ipod y me dice que esta bien. Lo he restaurado como 8 veces y le he puesto musica y videos pero siempre me borra todo. He aplastado Menu y Seleccion para entrar al sistemade diagnostic o del ipod y le pongo el test manual donde entro al IO y me dice q todo esta bien. Le he dado ya varios Format directamente desde el Windows 7 y nada tampoco, siempre me borra todo desde que pasan mas de 1300 canciones y me congeal todo el equipo. Ya no se que pensar de esta compania Apple porque no da ninguna solucion ha este tema.
I bought a 160gb iPod classic every time I try to put music on my external hard drive only copy up to 1500 songs and then freezes Itune me and I can not close, asks me to restore the ipod as factory, and do nothing . I try to close the program and itune will not let me, I try to turn off the computer and I can not shut, I looked to see if the iPod disk errors and says it's okay. I restored it about 8 times and I've put music and videos but I always delete everything. I crushed and Selection Menu to enter diagnostic sistemade or ipod and I put the manual test where I enter the IO and q tells me everything is fine. I have already given several Format directly from the Windows 7 and anything either, I always delete everything from passing over 1300 songs and I congeal whole team. No longer have to think of this company because Apple gives no solution has this issue.
iPod classic, Windows 7, ME BORRA TODO Y SE CONGELA
Maybe you are looking for
-
How to set the size of applet when invoking forms through formsserver
HI, I m using forms server to display my forms in browser, my problem is to change the size of applet at runtime so that the entire forms is displayed. right now the forms whose size is more r displayed with scrollbars. and thats giving me problem wi
-
Gnome 3 delete menue shortcuts [solved]
Hi, I tried wine under archlinux and installed some programms. After most don't worked and I removed wine. But now my Gnome 3 menue is full of wine apps. How can I delete them? Regards Last edited by archer42 (2011-09-04 08:15:55)
-
Hi All, We are facing a recurring issue which happens in BW QA system after we refresh is from the BW production system. After about a week or so after the refresh, the data loads halt in the BW QA system and the BW team gets an error "EDI partner pr
-
How to push Texts along with attributes to MDM
Hi All! There are lot of information how to push data to MDM via OHD. But all of that is regarding Attributes(and it works fine). Anybody knows how to push Texts data along with attributes?
-
Adobe Encoder CS6 stopped working, not start.
Hello, I have a PC with the following characteristics: Motherboard: Intel DX58SO CPU: Intel i7 2.97GHz RAM: 8 Gb Hard Disks: 2 in RAID (7200RPM) The problem is: Adobe Encoder CS6 stopped working, not start, what can I do? No works wanting to export f