Overall Network Scheduling (CN24N)
Hi Experts,
In ECC 6.0 ,while executing CN24N for a project with subnetworks, I am getting the error 'No Order Corresponds to Selection Criteria'.
I have done the following configuration :
1. Defined the Level for the networks ( mentioned as '2' and allowed he subnetwork scheduling).
2. Implemented the BADI for the Overall Network Scheduling with the default code.
And I have authorisation to do scheduling for the project but still I am gettting error message mentioned above.
Can you help me with this issue.
Thanks in advance....
K Ramaiah
HI
You may have set up the following pre-requisites:
In Customizing for the Project System, you have created network types and parameters (see Maintain Network Types, Specify Parameters for Network Scheduling and Define Parameters for Subnetworks).
When you create subnetwork structures in projects, make sure the actual level definitions correspond to the entries in this table. The system does not check if the combination of level and network parameter in this activity matches the combination in the actual subnetwork structure.
Example
For level 1, you enter network type PS02 and order 4000000 to 4999999.
If you enter level 1 as the selection condition in overall network scheduling, the system selects all networks with network type PS02, whose number lies within this range, and assigns them to level 1.
Hope the above helps.
Regards
Srikrishna
Similar Messages
-
What is overall networking schedule
Hi guys,
what is the field overall networking schedule we can find this in VA01....>EDIT....>Overall Networking ScheduleHI
IT IS USED FOR SCHEDULING THE ASSEMBLING PRODUCTS
A MATERIAL COMPONENT PRODUCED OR ASSEMBLED IN A NETWORK ACTIVITY AND IS USED AGAIN FOR EXAMPLE FOR A DELIVERY
In a complex project, different networks can exist for substructures. The dependencies in a project can make the activities in one network dependent on the completion of activities in another network. You can use the function for scheduling the entire network to take these dependencies into account during the calculation of dates.
In overall network scheduling, the system then schedules all networks that are linked with relationships.
Procedure
In the SAP Easy Access menu choose Logistics ® Project System ® Dates ® Overall network scheduling.
Enter the network that is to be scheduled.
Select the set of dates by choosing Basic dates or Forecast.
Enter the necessary start or finish date.
Choose Execute.
On the initial screen for overall network scheduling you can determine the scheduling type (backwards/forwards) and whether service/maintenance orders are taken into account.
In the info line, you receive a message that scheduling has been successfully carried out and that there is a log. With this log you receive information, warning or error messages. -
Network scheduling,Network error
Dear SAP PS Experts,
Can any one explain step by step of network scheduling.
User has been created number of networks,in one project,now its all networks are released,is there any solution to me to make single network.
Thanks in AdvanceHi,
Network scheduling is the process of calculating the dates when the activities assigned to networks should be performed. If the user has created several network activities, it is still possible to schedule them and plan dates for project separately. If for some reason only one network should be used, then if network status allows that, you may still delete the networks that are not needed and create all activities under one network header.
You may read more on scheduling in sections PS -> Dates, under the following link
[http://help.sap.com/saphelp_erp60_sp/helpdata/en/c0/1885347860ea35e10000009b38f83b/frameset.htm]
Kind regads, -
Native Vlan Effect on the Overall Network Performance
Dear Experts,
I would like to know that did Native Vlan affect the overall Network performance and make the whole network slow and can be cause for all Network devices to be failure or disconnect. I am facing this issue for the network that after apply Vlan dot1q tag native" in global Config the user disconnect from the network and also the devices.
Kindly assist on this issue with the practical scenario and result oriented conclusion.
Further I have following Devices in the Network Catalyst 4500, Nexus 5548, FIC 6248, UCS 5018 and Catalyst 3750.
The issue is this the VLAN 50 which is for UCS is not able to access from the LAN network even we added the VLAN 50 on all the Switches and it propogated to whole network so we make Vlan 50 as Native and added "switchport trunk native vlan 50 on trunks ports from Nexux 5548 to Fabric Interconnect and to Core Switch 4500. After added vlan 50 as native vlan we can access the UCS from LAN.
But after adding native vlan 50 on all trunks the Network Administrator complaining that network is slow and few servers are disconnecting.
here for the information that server vlan is 1.
Waiting for the answer.
Thanks,
JH
Thanks,
JHHello.
1. Could you please draw interconnectivity diagram of all the devices?
2. Could you chose any LAN device (on the same switch as UCS) and post here running config of the device that interconnects them? -
Hi
I have maintained network scheduling tpye as backwards in OPU6 and also maintained as "backwards" in control parameters for WBS scheduling. This is meant for both template project and operative project/network profiles.
I have created a template project with WBS heirarchy along with network activity scheduling types set as backwards.
Now while "including" the template project in an operative project, the system copies all the WBS elements and network activities from template project. However, the network schedulihng type is coming as FORWARDS, instead of "backwards".
Can anyone suggest what could be the problem here??
Best Regards
SrikrishnaHi,
your cust. is correct.
activating check box for template profile data while copying the project hopes will resolve the issue.
if the check box is active it copies the data from profile or else it copies data from the project which you copy.
rgds
Anish -
Actual dates should not impact the Network scheduled dates
Hi
I have planned schdeuled dates (Early/latest).
When i am confirming the activity the actual dates get updated
When i schedule the network the scheduled planned dates are recalulated
This should not happen for this client i am working for
The requirement is that the Planned Scheduled should remain fixed and
should only change if duration, relationship etc changes.
I have tried different option to solve this but still no clue
Adjust basic date 1, 2, 3 option
Shift Order
No date Update - this seems to work but not visible in CN22/CN25/CJ20n
Kindly highlight if any of you have come with similar requirement & provided solution to it
Either thru standard functionality, configuration or any development
CheersHi Manoj,
I had the same requirement and able to achieve it by std. settings. Keep in mind that the planned dates wil get changed when you do the final confirmation. You should have the control on the planned dates until the activity get Fianlly confirmed.
psconsultant -
Restrictions on APO Network scheduling?
Hi,
We are in the process of researching the restrictions of using APO to perform detailed scheduling on network orders. The last document I found (SAP note 708517 way back from 2005) listed the following restrictions present in SCM 4.1 - I need to know if these still exist in more recent versions, like 7.0:
-No transfer of relationships across networks. Relationships across
networks are also used for Subnetworks. So subnetworks will be
treated as independent APO project orders.
-No transfer of activity elements from R/3 to APO
o No transfer of relationships across networks. Relationships
-R/3 activity constraints (e.g. 'must start before') are not taken
into account
-Manual requirement dates will not be fixed in APO, but will be
transferred as offset times between activities and manual component
requirement date to APO.
Thank you very much for your help,
Andrew
Edited by: Andrew Schutsky on Dec 15, 2010 5:43 PM
Edited by: Andrew Schutsky on Dec 15, 2010 5:43 PMScott has a lot of important things to consider listed. I agree with him that you must make sure you know what you are getting yourself into. My thoughts to add are:
1. I would highly recommend some sort of bandwidth limiting. Unless you have an unlimited pipe to the Internet, someone will try to run bittorrent and chew up your bandwidth.
2. I would definitely disallow peer-to-peer communications on your wireless to avoid security issues Scott mentioned. (if you use wireless for VoIP, this will be a problem. you cannot currently disable peer-to-peer on a per SSID basis).
3. You need to have a good disclaimer page. If you have a lawyer, I would put the task to them to see what you have to include to protect yourself. If you are using LWAPP APs, you can use the built-in capabilities to present a splash page with your terms and an accept button. You can do this without having to do user authentication.
4. I agree with Scott about not claiming to filter, but if there are any schools nearby, or even kids living nearby, you may be at risk if you do not filter. My customers go different ways on this one. Some filter and say they filter. Some do not say they filter, but do anyways. Some leave it wide open. This is a liability question you need to work out with someone who knows more about the law than I do.
5. You absolutely should restrict available ports. I have set up public hotspots for many public sector organizations, particularly schools. We always restrict ports, usually just to http, https, and DNS, and sometimes VPN. Do not allow SMTP unless you want to be blacklisted. Spammers are starting to use open WiFi networks more and more to send untraceable spam.
6. As Scott mentioned, make sure your ISP is ok with it. If you have business service, it should not be a problem. If you are using residential DSL or Cable modem, they almost all forbid sharing your connection.
-Eric -
Windows 7 file copy and overall network performance
I have noticed some major problems with network performance when trying to access files stored on our NSS based file servers when using Windows 7 Pro.
Our file servers are OES2 SP1 and SLES 10 SP3. I did not have this type of problem when I was on Windows XP. I am currently using the Novell Client 2 SP1 on Windows 7. I did have the BSOD referring to the nccache.sys file. I read a TID that said to turn off file caching, but since doing that it is painfully slow.
Any help in advance will be greatly appreciated. If I should post this elsewhere please let me know as well. Thanks again.Originally Posted by mrosen
On 27.01.2011 20:06, dshofkom33 wrote:
>
> Our file servers are OES2 SP1 and SLES 10 SP3.
I sure hope that's incorrect, as OES2SP1 runs on SLES10 SP2, not 3.
Also, you should really be running OES2 SP2 at aleast (SP3 just having
been released).
> I did not have this type
> of problem when I was on Windows XP. I am currently using the Novell
> Client 2 SP1
No IR5?
> on Windows 7. I did have the BSOD referring to the
> nccache.sys file. I read a TID that said to turn off file caching, but
> since doing that it is painfully slow.
Caching doesn't have any noticeable or even measurable performance
impact on more copying of files, as caching doesn't come into play here.
It can only have an effect on repeated activity on the same file, which
fily copying by design isn't.
> Any help in advance will be greatly appreciated. If I should post this
> elsewhere please let me know as well. Thanks again.
This would probably be better suited for the client forums, but you need
to post more information. Being "Painfully slow" isn't a technically
precise nor helpful description.
CU,
Massimo Rosen
Novell Product Support Forum Sysop
No emails please!
Untitled Document
You are correct with our Server installations. Sorry for the mistype.
As far as my client goes. I will try the IR5 client version to see if that is any better.
As far as being "Painfully slow" i mean it was taking hours to install a product from a .ISO hosted on one of our NSS mapped drives. It would take 15 minutes to copy a 3MB file wile the .ISO was installing. It took even longer to try to copy the file down. I had no problems with any of the forementioned when running on Windows XP SP3 with client 4.91 SP5. What other details do you need? -
Scheduling with Forecast Dates
Dear Experts,
I want to know whether following is possible.
When creating a project initial schedule dates based on Activity Duration and Activity Relationships should reflect as Basic Dates. After project creation, when ever the Project Manager reschedule the project, those reschedule dates should be reflect as Forecasted dates.
By doing this the Project Manager will be able to identify Initial Plan as Basic Dates, Reschedule Plan as Forecasted Dates and Actual as Actual Dates.
Very Much Appreciate your Support,
Dileepa.Dear All,
I did reschedule Forecasting Dates using CN24 (Overall Network Scheduling) transaction. But after doing this, overall Project and WBS Elements dates does not changes based on the reschedule Network Time lines.
Further I have define "Network determines dates" as the Scheduling method in WBS Schedule Profile.
Very much appreciate your guidance,
Dileepa. -
Exit/Badi in the transaction of production order create or change (CO02)
hi all,
I need an exit/Badi in the transaction of production order create or change (preferably during SAVE).
I want to change structure AFVGD-usr02,AFVGD-usr03 .
<b>PPCO0007 Exit when saving production order</b>
the exit is not applicable EXIT_SAPLCOZV_001 .Hi
we around 200 exit for this tcode i found only three badi for this tcode.
AFABD_CHANGE Change Relationship
CAUFVD_CHANGE BAdI: Overall Network Scheduling with Selection Option
SIDAT_UPDATE Change date of price simulation.
check with this goto se18 and F4 thn give the Package as CO.enter u get this three.
reward pointd if use full -
BADI /BAPI /Function Module in PP
PP Experts,
I need help to identify the BADI /BAPI /Function Module in PP for
BOM Explosion multilevel (TXn CS11)
Planned Order Create and Change (Txn MD11/MD12)
Production Order Create and Change (CO01/CO02)
Simulation Order (Co01S/Co02S)
Appreciate your valuable inputs.
Thanks and Regards,
PradeepHi,
Following Enhancements available for the said T-Codes
Transaction Code - CS11 Display BOM Level by Level
Enhancement
PCSD0014 Wissensbasierte AuftragsStl:Status setzen beim fixieren
PCSD0013 Customer-specific processing of an explosion for BOM browse
PCSD0012 Customer - Mat. number/mat. number during material exchange
PCSD0011 Knowledge-based order BOM, parallel update
PCSD0010 Order/WBS BOM, determine explosion date
PCSD0009 Order/WBS BOM, determine URL page
PCSD0008 WBS BOM: Customer-specific explosion for creating
PCSD0001 Applications development R/3 BOMS
PCSD0002 BOMs: Customer fields in item
PCSD0003 BOMs: Customer fields in header
PCSD0004 BOM comparison
PCSD0005 BOMs: component check for material items
PCSD0006 Mass changes user exit
PCSD0007 Check changes in STKO
Business Add-in
BOM_EXIT BOM User Exit
BOM_IPPE iPPE Checks Within BOM Maintenance
BOM_UPDATE Maintain BOMS
CEWB_BOM_CUS_FIELDS EWB: Customer Fields with BOM Header (Screen Enhancement)
CEWB_BOM_UPDATE Check Bill of Material on Saving
CEWB_ITM_CUS_FIELDS EWB: Customer Fields with BOM Item (Screen Enhancement)
Transaction Code - MD11/MD12 Create Planned Order
Enhancement
LMDR2001 User exits restr. profiles of opt. pur.ord.-based load bldg
LMDZU001 User exits in additional planning
Transaction Code - CO01/CO02/CO01S/CO02s Create production order
Enhancement
PPCO0010 Enhancement in make-to-order production - Unit of measure
PPCO0012 Production Order: Display/Change Order Header Data
PPCO0013 Change priorities of selection crit. for batch determination
PPCO0015 Additional check for document links from BOMs
PPCO0016 Additional check for document links from master data
PPCO0017 Additional check for online processing of document links
PPCO0018 Check for changes to production order header
PPCO0019 Checks for changes to order operations
PPCO0021 Release Control for Automatic Batch Determination
PPCO0022 Determination of Production Memo
PPCO0023 Checks Changes to Order Components
STATTEXT Modification exit for formatting status text lines
PPCO0009 Enhancement in goods movements for prod. process order
CCOWB001 Customer exit for modifying menu entries
COIB0001 Customer Exit for As-Built Assignment Tool
COZF0001 Change purchase req. for externally processed operation
COZF0002 Change purchase req. for externally procured component
PPCO0001 Application development: PP orders
PPCO0002 Check exit for setting delete mark / deletion indicator
PPCO0003 Check exit for order changes from sales order
PPCO0004 Sort and processing exit: Mass processing orders
PPCO0005 Storage location/backflushing when order is created
PPCO0006 Enhancement to specify defaults for fields in order header
PPCO0007 Exit when saving production order
PPCO0008 Enhancement in the adding and changing of components
Business Add-in
SIDAT_UPDATE Change date of price simulation
CAUFVD_CHANGE BAdI: Overall Network Scheduling with Selection Option
AFABD_CHANGE Change Relationship
PPPI_SEL_ORD_EXT_REL
Regards
Ahsan -
Hi All,
I am BW consultant.Interested in PLM .Could you please tell about PLM and if I want learn PLM what shall i do? This module comes under functional or technical?
Thanks,
RakeshHi Rakesh,
There are different tracktion for PLM in SAP
1. <b>Product Data Management</b>
which covers Material Management, Bill of Material, Document Managment System, Classification System, Variant Configurations, CAD Interfaces. etc.
Most of the Industries will be using these cross application components for their Engineering Departments.
2. <b>Program Management</b>
Where Entire Program is capture i.e. From Customer Enquirry to the Order execution and till Dispatch.
Here again Project System, CFolder, CProjects, DMS, MM, BOM, Workflow etc can be a part of the PLM
3. <b>Asset LifeCylce Management</b>
This is used in different Scenarios where companies wants to trace there assets
or lifecycle of their assets.
Project Systems and DMS will be mostly involved.
4.<b> Quality Managment</b>
Strictly Speaking PLM Products are used in R& D Department, Engineering Department, Design & Drafting Departments of the Companies/organizations,
Where they try to modify their existing Products, try to Design as per the customer requirements, Try to launch new Product by doing R & D works.
PLM is Mostly used in these Departments of the Organizations
SAP Material Material Details:-
http://help.sap.com/saphelp_ppm400/helpdata/en/index.htm
http://help.sap.com/saphelp_cpro31/helpdata/en/home.htm
For Certification on SAP PLM follow the below link:
https://websmp203.sap-ag.de/certification
(Note you need Service ID to access this link)
Certification - Solution Consultant
Certificate Name Exam Topics Duration (h)/
No. of questions Software
Components Curriculum Booking Code
(SAP internal)
mySAP PLM Quality Management (2005) German/English 3 / 80 mySAP ERP2005 (ECC 6.0) C_TPLM40_05
PLM - Maintenance & Repair with mySAP ERP 2005 German/English 3 / 80 SAP ECC 6.0 C_TPLM30_05
PLM - Project Management with mySAP ERP 2005 German/English 3 / 80 SAP ERP Central Component 6.0 English/German C_TPLM22_05
mySAP PLM Quality Management (2003) German/English 3 / 80 SAP R/3 Enterprise English/German C_TPLM40_03
mySAP PLM - Project Management (2003) German/English 3 / 80 SAP R/3 Enterprise German/English C_TPLM22_03
mySAP PLM - Asset Life Cycle Management - Plant Maintenance (2003) German/English 3 / 80 SAP R/3 Enterprise German/English C_TPLM30_03
mySAP PLM - Asset Life Cycle Management - Customer Service (2003) German/English 3 / 80 SAP R/3 Enterprise German/English C_CS47_03
SAP Consultant Certification
Solution Consultant PLM - Project Management with mySAP ERP 2005
Software components: SAP ERP Central Component 6.0
Certification exam is included in course TPLM22 and is also offered in separate certification events at many SAP locations.
Certification ID (Booking code): C_TPLM22_05
Certification duration: 3 hours
Number of certification questions: 30
Required certificates for participation in this certification test: None
Consultant Academy courses for certification preparation: TPLM20 (Project Management I), TPLM22 (Project Management II (Case Study))
Alternative Project Team Training courses for certification preparation: PLM200 (Project Management), PLM210 (Project Management - Structuring), PLM 220 (Project Management Logistic), PLM230 (Project Management Controlling), PLM240 (Project Management Reporting)
Please note that you are not allowed to use any reference materials during the certification test (no access to online documentation or to any SAP system).
The certification test Solution Consultant PLM Project Management with mySAP ERP 2005 verifies the knowledge in the area of the mySAP Product Lifecycle Management for the consultant profile Project Management. This certificate proves that the candidate has a basic understanding within this consultant profile, and can implement this knowledge practically in projects.
The certification test consists of questions from the areas specified below:
Topic Areas
1. Project Structuring (+++)
Basic data in PS: work breakdown structure, network and activities, milestones, PS texts, documents
Project Builder and project planning board
Project simulation
Standard work breakdown structure, standard network
Assembly processing
2. Dates
Time scheduling and scheduling (network scheduling, project scheduling, overall network scheduling)
Actual dates
3. Resources
Work center
Capacity planning and capacity evaluation
Workforce planning to HR resource
Confirmation and working time sheet
Internet scenarios
Workflows in PS
4. Material
Work breakdown structure BOM
BOM PS interface
Component assignment in the network
Material procurement through in-house production or external procurement
Collective stock and project stock
Requirements grouping
Progress tracking
ProMan
Delivery from the project
5. Costs and Budget (++)
Cost planning in the work breakdown structure
Network costing
Assigning orders to the project
Budgeting and availability control
Commitment and actual costs through account assignment and order assignment
6. Revenue and Payments
Revenue and payment planning in the project
Sales pricing and quotation creation
Resource-related billing
Milestone billing and down payment processing
7. Period-End Closing
Template allocation
Application of overhead
Interest calculation
Progress analysis and Progress Analysis Workbench.
Results analysis
Incoming orders
Settlement
8 Miscellaneous
Exernal service and service activities
Organizational units in SAP ERP
Info systems in project management
Field selection
OpenPS
Amount of questions by topic (as percentage of test):
+ = 1 - 10%
++ = 11 - 20%
+++ = over 20%
SAP Consultant Certification
Solution Consultant mySAP PLM Quality Management (2003)
Software components: R/3 Enterprise (SAR R/3 Enterprise Core 4.70/SAP R/3 Enterprise Extension Set 1.10)
Certification duration: 3 hours
Number of certification questions: 80 multiple choice questions
Required certificates for participation in this certification test: None
Courses for certification preparation:
PLM400 (Quality Management) or LO170 (Quality Management)
PLM405 (Quality Inspections) or LO705 (Quality Inspections)
PLM410 (Quality Notifications) or LO710 (Quality Notifications)
PLM415 (QM in Procurement) or LO715 (QM in Procurement)
PLM420 (QM in Discrete Manufacturing) or LO720 (QM in Discrete and Repetitive Manufacturing)
PLM421 (QM in the Process Industry) or LO721 (QM in the Process Industry)
PLM425 (QM in Sales and Distribution/Quality Certificates) or LO725 (QM in Sales and Distribution/Quality Certificates)
Participants who have attended the prerequisite courses in SAP R/3 4.6C, can learn about the new developments for SAP R/3 Enterprise by attending the delta course D47QM.
TPLM40 Quality Management (Case Study)
Please note that you are not allowed to use any reference materials during the certification test (no access to online documentation or to any SAP system).
The certification test Solution Consultant mySAP PLM Quality Management (2003) verifies the knowledge in the area of the mySAP Product Lifecycle Management for the consultant profile Quality Management. This certificate proves that the candidate has a basic understanding within this consultant profile, and can implement this knowledge practically in projects.
The certification test consists of questions from the areas specified below:
Topic Areas
1. Integration of QM and MM (++)
Material master
Quality info record: Procurement
Source inspection, GR inspection
Vendor evaluation, vendor release, vendor selection
Manufacturer part number
Handling Unit Management
Warehouse Management
2. QM in Discrete Manufacturing (++)
Integrated inspection planning
Routing, reference operation set, rate routing
Inspection during production
Inspection at end of production
Inspection for external processing
Inspection during repetitive manufacturing
Statistical Process Control (SPC)
3. QM in the Process Industry
Integrated inspection planning
Master recipe
Integrated inspection processing
Inspection during production
Inspection at end of production
Batch valuation
Recurring inspections
Statistical process control (SPC)
Engineering change management
Digital signature
Batch record
4. Integration of QM in the areas Service and Sales and Distribution
Inspections for delivery
Quality info. record: Sales and Distribution
Make-to-order production
Make-to-stock production
Repairs and returns processing
5. Quality Planning (++)
Basic data
Inspection planning
Logistics master data
6. Quality Inspections (++)
Inspection lot
Defects recording
Results recording
Usage decision
7. Quality Certificates
Certificate planning
Certificate creation
Quality certificates on the Web
Quality data interchange
8. Quality Notifications
Notification systems
Customer complaint
Complaints against vendors
Internal problem notification
Simplified notification
ISR
SAP Support Desk
Solution database
9. Quality Control (++)
Dynamic modification
Statistical Process Control (SPC)
Quality key figures, results history
Quality-related costs
Standard analyses, flexible analyses, early warning system
Business Information Warehouse
Interfaces to subsystems (QM-STI)
10. Test Equipment Management
Test equipment
Calibration planning
Calibration inspection
Test equipment tracking
11. Sample Management
Physical samples
Physical-sample categories
Confirmation requirement
Sample-drawing procedure
12. Stability Studies
Creating a stability study
Initial test
Stability planning
Stability tests
Completing a stability study
13. Configuration and Organization
Customizing
Enhancements
BAPIs
BAdIs
Field selection
Lists
Status management
User roles
Analysis tools
Interfaces
Follow-up actions
SAPScript Forms
Authorization concept
Amount of questions by topic (as percentage of test):
+ = 1 - 10%
++ = 11 - 20%
+++ = over 20%
SAP Consultant Certification
Solution Consultant PLM - Maintenance & Repair with mySAP ERP 2005
Software components: SAP ECC 6.0 ( SAP ERP Central Component 6.0)
Certification exam is included in course TPLM30 and is also offered in separate certification events at many SAP locations.
Certification ID (Booking code): C_TPLM30_05
Certification duration: 3 hours
Number of certification questions: 80 multiple choice questions
Required certificates for participation in this certification test: none
Courses for certification preparation: PLM300 (Business Processes in Plant Maintenance), PLM305 (Structuring and Managing Technical Objects), PLM310 (Preventive Maintenance and Service), PLM315 (Maintenance Processing: Operational Functions), PLM318 (Analytics in Enterprise Asset Management), TPLM30 (Asset Life-Cycle Management - Plant Maintenance (Case Study))
Please note that you are not allowed to use any reference materials during the certification test (no access to online documentation or to any SAP system).
The certification test Solution Consultant PLM - Maintenance & Repair with mySAP ERP 2005 verifies the knowledge in the area of solution mySAP Product Lifecycle Management for the consultant profile Maintenance & Repair. This certificate proves that the candidate has a basic understanding within this consultant profile, and can implement this knowledge practically in projects.
The certification test consists of questions from the areas specified below:
Topic Areas
1. Organizational Units and Master Data in Plant Maintenance (++)
Organizational Units
Maintenance Plant and Planning Plant
Work Centers
Functional Locations
Structure Indicator
Reference Location and Functional Location
Creation Options
Data Transfer
Equipment
Installation/Dismantling at Functional Locations
Equipment Hierarchy
Change Documentation
Equipment Category
Synchronization of material/construction type
Synchronization of equipment/serial number
Material and Serial Numbers
Serial Number Profile
Goods Movement and Warehouse Stock
Valuation Batches
Bills of Material (BOM)
Assemblies
BOM Categories
Item Categories
Change Documentation
Additional Functions
Classification
Measuring Points and Counters
Partners and Addresses
Document Link
Status Management
2. Maintenance Processing (+++)
Corrective Maintenance
Notification Types
Objects and Object Information
Catalogs and Catalog Profiles
Integration Notification/Order
List Viewer for Notifications and Orders
Order Type
Object List
Operation List
Relationships
Material List
Availability Check
Order Release and Printing
Material Withdrawal
Completion Confirmation in Time
Technical Completion Confirmation
Technical Completion
Action Log and Document Flow
Processing External Services
External Services as Individual Purchase Order
External Services with External Work Centers
External Services with Service Entry Sheets
Processing Refurbishment Tasks
Valuation Type and Valuation Category in the Material Master
Refurbishment Without Serial Numbers
Refurbishment with Serial Numbers
Inventory Management and Controlling
Processing Maintenance Projects
Planning and Executing Maintenance Projects
Completion, Settlement, and Monitoring of Maintenance Projects
Capacity Planning
Scheduling
Work Center and Available Capacity
3. Controlling Functions in Plant Maintenance (++)
Plant Maintenance in the Organizational Structures of Accounting
Cost Estimation
Planned/Actual Cost Determination
Order Settlement
Logistics Information System (LIS)
Plant Maintenance Information System (PMIS)
4. Preventive Maintenance (+++)
Task List Management
Task List Types
Profile and User Fields
Component Assignment
Task List and Order
Single Cycle Plan
Structure
Scheduling Indicator
Deadline Monitoring
Change Documentation
Strategy Plan
Maintenance Strategy
Task List and Maintenance Strategy
Change Documentation
Performance-Based Maintenance Planning
Counters and Measurement Documents
Maintenance Plan Scheduling
Deadline Monitoring
Maintenance Planning with Multi-Counter Plans
Cycle Sets
Link Type
Weighting Key in the Test:
+ = 1 - 10%
++ = 11 - 20%
+++ = over 20%
Regards
Rehman
Reward Your Points If Useful -
Hi Guys
I am have working on PDM(Team center), VPM(Enovia DPM) and Catia V5 since 2 years now and I am planning to change to SAP PLM. Can any one help me Do i need to Have knowledge in any other things other then PDM, VPM to start up with SAP PLM.
If I want to take p my certification in SAP PLM where can i get it,( Do i need to contact Siemens for it or i can try with some other place)
Your help will be Appreciated
PradeepHi Pradeep,
1.As you have worked in PDM (Team Center), and other CAD packages, you will be knowing the Functional processes/activities involved in the PLM which is very much required to learn and give solutions in SAP PLM.
2. As you must have worked with BOM, Documents, workflows, Organizational hierarchies, Roles & Responsibilities (Draftsmen, Junior/Assist Design Engineer, Design Engineer, Project Manager etc etc) and their authorizations.
3. So with these things it is very easy to learn & work with SAP PLM, if you are currently working in non-sap or any functional domain, you can join any SAP implementation company as a Trainee or Fresher and get trained on SAP
or there are many training institutes which train SAP even for 25-30K without certification. (You will get a fare idea about what SAP is )
Even SAP PLM starts with PDM Objects like, Material Master, Document Managment System, Engineering Change Managment (Versioning/Revisioning for BOM, MM, DIR), Bill of Materials, Classification System (Classes, Characteristics, Object Dependencies etc) all this are PDM Objects in SAP.
And there is Collaboration Projects, Collabortion Folders and CAD Integrations. etc these all together constitutes a SAP PLM
For Certification on SAP PLM below mentioned are details. and follow the link as well
https://websmp203.sap-ag.de/certification
SAP Consultant Certification
Solution Consultant PLM - Project Management with mySAP ERP 2005
Software components: SAP ERP Central Component 6.0
Certification exam is included in course TPLM22 and is also offered in separate certification events at many SAP locations.
Certification ID (Booking code):
C_TPLM22_05
Certification duration: 3 hours
Number of certification questions: 30
Required certificates for participation in this certification test: None
Consultant Academy courses for certification preparation: TPLM20 (Project Management I), TPLM22 (Project Management II (Case Study))
Alternative Project Team Training courses for certification preparation:
PLM
200 (Project Management), PLM210 (Project Management - Structuring), PLM 220 (Project Management Logistic), PLM230 (Project Management Controlling), PLM240 (Project Management Reporting)
Please note that you are not allowed to use any reference materials during the certification test (no access to online documentation or to any SAP system).
The certification test Solution Consultant PLM Project Management with mySAP ERP 2005 verifies the knowledge in the area of the mySAP Product Lifecycle Management for the consultant profile Project Management. This certificate proves that the candidate has a basic understanding within this consultant profile, and can implement this knowledge practically in projects.
The certification test consists of questions from the areas specified below:
Topic Areas
1. Project Structuring (+++)
Basic data in PS: work breakdown structure, network and activities, milestones, PS texts, documents
Project Builder and project planning board
Project simulation
Standard work breakdown structure, standard network
Assembly processing
2. Dates (+)
Time scheduling and scheduling (network scheduling, project scheduling, overall network scheduling)
Actual dates
3. Resources (+)
Work center
Capacity planning and capacity evaluation
Workforce planning to HR resource
Confirmation and working time sheet
Internet scenarios
Workflows in PS
4. Material (+)
Work breakdown structure BOM
BOM PS interface
Component assignment in the network
Material procurement through in-house production or external procurement
Collective stock and project stock
Requirements grouping
Progress tracking
ProMan
Delivery from the project
5. Costs and Budget (++)
Cost planning in the work breakdown structure
Network costing
Assigning orders to the project
Budgeting and availability control
Commitment and actual costs through account assignment and order assignment
6. Revenue and Payments (+)
Revenue and payment planning in the project
Sales pricing and quotation creation
Resource-related billing
Milestone billing and down payment processing
7. Period-End Closing (+)
Template allocation
Application of overhead
Interest calculation
Progress analysis and Progress Analysis Workbench.
Results analysis
Incoming orders
Settlement
8 Miscellaneous (+)
Exernal service and service activities
Organizational units in SAP ERP
Info systems in project management
Field selection
OpenPS
Amount of questions by topic (as percentage of test):
+ = 1 - 10%
++ = 11 - 20%
+++ = over 20%
No responsibility is taken for the correctness of this information. Copyright © SAP AG 2006.
Very Important:
http://mysapbi.blogspot.com/2007/01/sap-help-in-pdf-files.html
Regards
Rehman
Reward Points if Useful -
Hi everybody,
I m faced with a development where in i need to send a mail whenever a production order is being changed.
And i need to capture the changes (addition/deletion and change in quantity of a particular component) in a production order.
Can anybody suggest me which is the user exit or BADI to be used?
Helpful answers will surely be rewarded.
Thanks in advance,
Sanghamitra.Hi,
You can use the userexit:PPCO0010 for u r requirement.
The following userexits available.
Enhancement
PPCO0010 Enhancement in make-to-order production - Unit of measure
PPCO0012 Production Order: Display/Change Order Header Data
PPCO0013 Change priorities of selection crit. for batch determinat
PPCO0015 Additional check for document links from BOMs
PPCO0016 Additional check for document links from master data
PPCO0017 Additional check for online processing of document links
PPCO0018 Check for changes to production order header
PPCO0019 Checks for changes to order operations
PPCO0021 Release Control for Automatic Batch Determination
PPCO0022 Determination of Production Memo
PPCO0023 Checks Changes to Order Components
STATTEXT Modification exit for formatting status text lines
PPCO0009 Enhancement in goods movements for prod. process order
CCOWB001 Customer exit for modifying menu entries
COIB0001 Customer Exit for As-Built Assignment Tool
COZF0001 Change purchase req. for externally processed operation
COZF0002 Change purchase req. for externally procured component
PPCO0001 Application development: PP orders
PPCO0002 Check exit for setting delete mark / deletion indicator
PPCO0003 Check exit for order changes from sales order
PPCO0004 Sort and processing exit: Mass processing orders
PPCO0005 Storage location/backflushing when order is created
PPCO0006 Enhancement to specify defaults for fields in order heade
PPCO0007 Exit when saving production order
PPCO0008 Enhancement in the adding and changing of components.
The follwing badis available:
Business Add-in
IDAT_UPDATE Change date of price simulation
FABD_CHANGE Change Relationship
AUFVD_CHANGE BAdI: Overall Network Scheduling with Selection Option
If it is helpful rewards points.
Regards
Pratap.M -
User exit for Production Order release
Hi Experts,
Any User eixt for Prouction Order Mass processing.
Before releasing the production order i have to do some checks. Can you please provide right user exit. More reward points with best solutions.
Thanks
CrisHi,
check the following userexits and BADI's for Production Order
Enhancement/ Business Add-in Description
Enhancement
PPCO0010 Enhancement in make-to-order production - Unit of measure
PPCO0012 Production Order: Display/Change Order Header Data
PPCO0013 Change priorities of selection crit. for batch determinati
PPCO0015 Additional check for document links from BOMs
PPCO0016 Additional check for document links from master data
PPCO0017 Additional check for online processing of document links
PPCO0018 Check for changes to production order header
PPCO0019 Checks for changes to order operations
PPCO0021 Release Control for Automatic Batch Determination
PPCO0022 Determination of Production Memo
PPCO0023 Checks Changes to Order Components
STATTEXT Modification exit for formatting status text lines
PPCO0009 Enhancement in goods movements for prod. process order
CCOWB001 Customer exit for modifying menu entries
COIB0001 Customer Exit for As-Built Assignment Tool
COZF0001 Change purchase req. for externally processed operation
COZF0002 Change purchase req. for externally procured component
PPCO0001 Application development: PP orders
PPCO0002 Check exit for setting delete mark / deletion indicator
PPCO0003 Check exit for order changes from sales order
PPCO0004 Sort and processing exit: Mass processing orders
PPCO0005 Storage location/backflushing when order is created
PPCO0006 Enhancement to specify defaults for fields in order header
PPCO0007 Exit when saving production order
PPCO0008 Enhancement in the adding and changing of components
Business Add-in
AFABD_CHANGE Change Relationship
CAUFVD_CHANGE BAdI: Overall Network Scheduling with Selection
PPPI_SEL_ORD_EXT_REL
SIDAT_UPDATE Change date of price simulation
Regards
Maybe you are looking for
-
Erro na geração da NFe - Devolução de Transferência em Trânsito
Bom dia a todos. Estou tentando fazer o cenário de devolução de transferência entre filiais quando o produto ainda estiver em trânsito. Utilizei como referência para todas as etapas o documento encontrado aqui no próprio fórum Stock Transfer Order (S
-
Is it possible to save an Xcelsius chart that has been exported to BOE and is in a dashboard to a pdf or Excel file? This is a popular feature for Webi reports, but it seems to be unavailable for Xcelsius/SWF documents. We can print using the Print
-
IPad 1 screen goes blank. Touch response continues to work.
I have iPad 1 with latest supported software (5.1.1). The screen has gone blank. Touchscreen response continues with no issues. iTunes also recognizes iPad without any issue. The problem is not gone even after restore. Kindly help.
-
Hi, This is request to you that in sap any standard report for customer wise collection report/receipt report in SAP.?. Please provide the tcode. Regards Jibanjyoti
-
Is there a list of drivers in the kernel?
hey everyone... i'm searching for a list of drivers included in the linux kernel. i knew modprobe -l but this method is not really handy. as example a website with categories or filters would be good. i hope anyone can help.