Overlaping in Standard Reports with Layout

Dear friends,
When I am trying to take the Standard SAP Statutory Reports then the Values in the report are overlaping with the Layout of the form... How to resolve this...
Any Replies please
Thanks & Regards,
Satya.
Edited by: Satya Garikapati on Jul 10, 2009 12:34 PM

I think you are doing clasical reporting isn't ?
If so move the column of that field
for example starting point of field xxxx1 is 10 it has 10 charecter
next field xxx2 should starts at 22 becouse you ill be having two line in between.
You need to count like that
Second Cause
You might mapped both fileds to same location
Please check
Warm Regards

Similar Messages

Standard Report with IDOC Number and PR number

Hi
My client need the Standard report with the combination fields of " Purchasing Number , Requirements tracking number in PR,
IDOC number , IDOC Processing status. "
(Our PR will generates through IDOC from other system via XI interface)

Hi Nagendra,
for Purchasing Number , Requirements tracking number in PR you can use -ME5A
Purchasing Number-EBAN-BANFN
Tracking number goto- MELB.
table name-EKPO
for IDOC number , IDOC Processing status -we09
For IDOC number -EDID4-DOCNUM
IDOC Processing status-EDIDC-STATUS
Regards,
Krishna.
Edited by: kris_hna on Sep 8, 2011 1:14 PM
Edited by: kris_hna on Sep 8, 2011 1:19 PM

How to call standard report with in zprogram?

Hi Sap experts,
How to call standard report with in zprogram.
For example if country is 'US' then call Zprogram(zprog_US).Inside zprogram call standard report(rhecm_change_proc_status).If country is 'CA' then call zprogram.Inside zprogram call standard report.For same othercountres like 'PR','GB','ES'.Actually HR_ECM_READ_FEATURE_CARGP will having the input as employee id and will return the CAREA(County like 'US','PR'......).Kindly help me what is the procedure?
Regards,
Sujan

>
sujan T wrote:
> Thanks for your reply.
>
> What is the logic to call the standard report from zprogram?Inside the zpogram how to call standard report?
>
> Regards,
> Sujan
no special logic is required
If u want to use
RPUAUDOO IN THE ZREPORT.
Put the submit button where ever required
ex: In zreport after certain process reacedu want to call then use
submit rpuaudoo and return.
Regards
Sas

Standard Reports with T codes.

Hi All,
How to get all the Standard reports with T-codes as a list in MM functionality.

U can get reports from MC01 Transaction also.
Copy the reports from following link,
http://www.sap-img.com/materials/list-of-standard-reports-in-mm.htm
Edited by: Anand K on Apr 17, 2008 12:28 PM

Standard Report with Condition Type and Condition Records

Hello to all,
Is there any standard report available in which Condition Type and Condition values are displayed in either column or row format? The selection criteria can be either Quotation, Contract, Sales Order, Delivery, Invoice or Billing. Thanks anyways...

Hi Huzefa,
Pls check the relevant table where the condition records are stored. then do a query with that condition table and KONP. say for eg: condn type ZINV,ZMRP gets stored in condition table A821, then combine A821 and KONP, u can input condition type and get the values........................
go to vk13, display and click on layout, u will able to see the condition table.
Rgds,
Anitha J

Download ALV report with layout to application server

Hi Gurus,
I have a problem as follows:
I have one ALV Grid report. This report is very time consuming.
That is why, user wants this to be run in background every night and in the morning when user comes to the office that ALV report should be on user's drive in excel format.
However, it should run with one specific variant and that variant should be dynamically populated. (I have handled this part)
It should also apply specific layout that has many filtering conditions.
As I can not download ALV to excel in background, I decided to download it to the Application server.
My problem is that when run in background, in spool ALV report shows o/p with proper filter conditions that is 5 out of 20 records.
But, when I write this report o/p to Application server, it writes all the records in there, i.e., all 20 records. It does not take into account all the filters. [:(]
I also tried downloading spool to excel, but o/p is not neatly formatted. All columns are fying here and there.
Any suggestion, how can I write ALV o/p to Application server with layout into consideration?
P.S. I have searched forum for this type of query, but no apt responses.
Thanks

did u downloaded the report with standard option provided in the alv and checked the data? that is populating all 20 records?. if so then use coding for achieving the standard one
at the end of selection do like this ..
SET USER-COMMAND ' %PC' .
and in the user-command use like this..
case sy-ucomm.
when ' %PC'.
give the file name ..
do processing ..
endcase.

Standard report with po released date

hi mm experts,
request pl let me know is there any standard report which gives the po details and release indicator with released date of po.
pl help.
regards
Srihari

Hi
U can get Po release date per release code, use CDHDR and CDPOS tables in SE16
Enter transaction as ME28/ ME29N, Enter the range date,enter the object value as PO number (PO number should be 10 digit if the PO is not 10 digit, then add zero value for the prefix).
Then you can find the release date
Rest details u can find from ME2N report i.e Po details and Release indicator using dyanamic selection
Vishal...

Standard report with fixed position.

Hello,
I have a page where i want the first report to have a fixed position.
I have 3 regions with reports, the first will only display product name and number, the next report will display sales. The last report is very long so I have to scroll quite a bit. That's why i want the first report with names to have a fixed position so i can see which product i'm looking at.
I have tried to make a copy of the standard report template, and in the before rows i have this code
<table class="t3standard" summary="Report" style="position:fixed;">
this didn't work
Is this a way of making changes to the report template? Is it possible to make theese kind of changes in the report template or du I have to go inside the CSS file to add position:fixed somewhere?
Anders

What browser(s) are you using? Win IE doesn't support fixed positioning :-(
How about setting a fixed height for the last report and making it scrollable using overflow: scroll? This would make the first 2 reports "fixed" by default...

Standard Report's Layout not displaying 'SAVE LAYOUT' Option

Dear All,
Using Tcode VF44, i am getting output list.But in that list when i click on select layout option from toolbar its not displaying 'save layout' Option. can anybody give me soln for the same.How can i get that option?
Regards,
Mayank

HI,
No yaar, This one is standard report and i am getting 'SAVE LAYOUT' option in 300 but not in Production Server.There must be settings for this. If u hv any idea ?
Regards,
Mayank

Standard Reports with Links

I'm trying to create a dashboard on the home page of my application for the logged in user. The page ideally would have 2 interactive reports they could click on to navigate to edit the record. It seems I can only use 1 interactive report per page. Is it possible to add links on standard reports to map to the edit page?
Thanks,
Blake

You're right that you can't use more than one IR on a page. And Jeff is absolutely right that you can use the Form with Report.
However, if you already have an edit form built on the data you want to edit, you can indeed create a standard report and then link it to the existing form.
Just create the report on your Dashboard Page as you normally would. When that is done and working the way you want it to, edit the dashboard page and then edit the Report Attributes of that report. Chose the column that you want to make a link to the form and click on the edit icon (on the far left) for that column. Scroll down to the COLUMN LINK region on the page. This is where you can set up the column to be a link to another page (or url).
Depending on which column you chose, you'll probably want to use either one of the built-in images, or the actual column value for the link text. The quick links below this field will help you out with this.
For TARGET, select "Page in this Application", and then enter the page number of the edit screen in PAGE.
You'll also want to pass across the ID of the item you want to edit to the page. You do this by placing that item's name (i.e. P29_ORDER_ID) in the NAME and the replacement variable for the value (i.e. #ORDER_ID#) . Luckily the little flashlights help with this as well.
Once you've got that done, apply your changes and your link should show up in your report!
Hope this helps.
Doug
www.sumneva.com

Connecting SAP standard report with Crystal report

Hi all,
I've a SAP standard report S_ALR_87012284 using which I need to develop a dashboard using Xcelsius but before that I need
to build that report in Crystal reports.
Now is there any way to connect directly to SAP standard report from Crystal report ??
Thanks
John

Hi John
I am not sure about the link to a standard Report. I don't think it is possible, As far as I can work out the closest you will get to what you want in CR2008 is a link to Data Clusters, Data Dictionary and Function Modules CR. Perhaps someone with more experience than me can offer more insight though.
If your goal is to utilize CR2008 just for the ability to link to Xcelcius you should check out the following site, as it may help you approach your goal differently. This shows a great method for linking directly from Xcelcius to SAP.
http://enterprisegeeks.com/blog/2009/02/18/abap-freak-show-february-18-2009/
regards
Phillip

How to dispay report with layout option in selection screen?

Hi all,
I have designed a report which also has a list box in the selection screen for the type of saved layout that users have saved. I want the report to be displayed in the layout that the user has entered.
Eg: if user chooses \RP from the listbox in the selection screen; then the layout format for \RP should be displayed as output of the report.Can anyone tell me how to do this?Thanks in Advance.

Hi ,
parameters:p_vari type disvariant.
data: v_save type c.
v_save = 'A'.
data:i_variant type disvariant.
write the code in the At selection screen on value request p_vari.use the FM reuse_alv_variant_f4.
then in the at selection screen check weather the selected variant is existed by using the FM reuse_alv_variant_existance
and in the main GRID FM pass the variant internal table.
or check BALV* in the Se38 for examples
Regards,
Bharani,

Need help with customizing standard reports in Fusion Applications

Hi,
   I have requirement to customize 'Asset Transfer Report' in Oracle Fusion.
   This report is a BI Publisher report and Data Model lies in folder '/Share Folders/Financials/Fixed Assets/Tracking/Data Model' and report lies in folder '/Share Folders/Financials/Fixed Assets/Tracking'.
    Steps which i have completed
   I am trying to customize this report, i followed the below steps
Step 1:-
   Copied Data Model into '/Shared Folder/Custom/Financials/Fixed Assets/Tracking/Data Model' and report into '/Shared Folder/Custom/Financials/Fixed Assets/Tracking/'
Step 2:-
   Opened task 'Manage Custom Enterprise Scheduler Jobs for Ledger and Related Applications' and created a job with the following details.
Job Definition
Field Name
Value
Display Name
XX Asset Transfers Report
Name
XX_ASSET_TRANSFERS_REPORT
Path
/FA/
Application
Financials Common Module
Description
XX Asset Transfers Report
Job Application Name
FinancialsEss
Enable Submission from Enterprise Manager
Job Type
BIPJobType
Class Name
oracle.xdo.service.client.scheduler.BIPJobExecutable
Default Output Format
Report ID
/Custom/Financials/Fixed Assets/Tracking/Asset Transfers Report.xdo
Priority
Allow Multiple Pending Submissions
False
Enable Submission From Scheduled Processes
Yes
User Properties
Field Name
Value
PDF
.*\.pdf$
jobDefinitionName
FAS430
XML
.*\.xml$
jobPackageName
/oracle/apps/ess/financials/assets/tracking/transfers
EXT_PortletContainerWebModule
Ledger
Since the standard report has the below parameter i have created same set of parameters for the Job which i have created, but i do not know how to assign the list of values to these parameters
Parameter Prompt
Data Type
Page Element
Default Value
Required
Book
String
Text box
Yes
Currency
String
Text box
Yes
Period
String
Text box
Yes
Batch
String
Text box
No
Step 4:-
   Now when i navigate to schedule process, when i click Schedule New Process Button in the list of values i can see the job which i created. When i submit the job is completing with error.
   When i open the xml file, file is blank and no data is available in the file.
   When i open the log file i see the below error
dummy file is deleted
================ BIPJobExecutable Execution Started ============
OutputFile : /u01/APPLTOP/instance/ess/rfd/67068/out/67068.xml
Request ID: 67068 ClassLoader is weblogic.utils.classloaders.GenericClassLoader@1c85c3a finder: weblogic.utils.classloaders.CodeGenClassFinder@1c85cb3 annotation: FinancialsEssApp#V2.0@
RequestId:67068
ReportID : /Custom/Financials/Fixed Assets/Tracking/FLY FA Transfers Report.xdo
Process : BIPDocGen
The bipJobID : 6252
bipJobID is updated to ESSRuntimeService
BIP_STATUS_URL is added to ESSRuntimeService
================ BIPJobExecutable is running in async mode. ============
================ Please check the ess status for more detail info. ============
    Am i doing anything wrong while creating the job?
Note :- I created another test data model and report with 'Select SYSDATE from dual' and am able to see the report completing successfully.
Please kindly help, i am failing to meet my deadlines.
Regards,
Prasad R

Hello Jani Rautiainen,
    Thanks a lot for replying my question.
    This is the first time i am working with the BI Publisher reports and fusion applications.
    My requirement is to add few columns to the standard report with out loosing the functionality.
    I was not aware that there is two ways of doing this, i was always copying data model and report to a new folder and trying to create a new job for the report.
    As mentioned in the document 7.2.1.4 Using the Customize Feature    , i clicked on the more button on my report but i do not see the customize option. Do i need to have any specific role for this to appear in the menu? Please kindly let me know.
    Also i see below limitations while customizing report
Limitations
Following are limitations of the Customize report option:
The Customize option is only available through direct access to the BI Publisher server using the /xmlpserver URL (for example:http://hostname.com:7001/xmlpserver). The Customize option is not available through the /analytics URL used to access Oracle Business Intelligence Enterprise Edition.
The Customize option is available only for reports. The Customize option is not available for data models, style templates, or sub templates.To customize data models, style templates or sub templates and insulate them from potential changes from patching: Make a copy of the data model, style template, or sub-template and either rename it or place it in a custom folder. Ensure that you update any reports to point to the customized data model, style template, or sub template.
    My requirement is to add few additional columns which needs Data Model to be modified, Can i copy the data model to the custom folder and do my modifications and point this data model in the report(as mentioned in the point 2 in the limitations)? In that case, will the original report submission works?
Regards,
Prasad R

Report with goods supplier data

Hi Gurus,
Any standard report with purchase orders showing also general data of the goods supplier including number, name, address?
Regards,
Alberto

Hi,
I've never seen for standard report in purchasing that can suit your requirement to show PO list with detail vendor info into one layout report.
You may use ME80FN report that might have close feature to your query, which you need one more step to press 'Vendor" button to see the detail of the vendor.
Cheers,
Girang

Standard report for production order

Dear all
Is there any standard report with reference to material for all procuction orders ie open,closed etc

Hi,
COOIS - Production order information system
For Open Prod orders
Enter material number and sys. status CNF tick Excl.
For Closed Prod orders
Enter material number and sys. status CNF, DLV.
Regards,
Sankaran

Overlaping in Standard Reports with Layout

Similar Messages

Maybe you are looking for