Override values do not rollup to parent

I'm getting some confusing results. i have an account for which i have overrides values. The children work nicely, the problem is that the parent does not add the override amounts, it calcs it own value based on the current exchange rate.
Is that the way it's suppose to be or am i missing something
Thanks in advance
Exchange Rate assume it .075
Entity Currency USD
Parent 1500 112.50
Child 1 1000 100
Child 2 500 50

Guys this is HFM Consolidation hope there is no time balance settings in accounts attributes and we have not mentioned grouplabel to parent entity if that is the case it is as group label base entities will not aggrigate to parent entity but here few accounts are not aggrigating parent entity.
Thanks / Rama

Similar Messages

Base level entities data is not rollup to parent level entity for few ac's

Hi guys,
Can some one pls help me i am not able to consolidate the base level entitys data to parent level for few accounts.
remaining all accounts are consolidating to parent level entity from base level.
Accounts which are not rolling up to parent level those accounts are few flow accounts and some accounts are Dynamic accounts.
Thanks in advance............Pls revert me earliest........
Rama.

Guys this is HFM Consolidation hope there is no time balance settings in accounts attributes and we have not mentioned grouplabel to parent entity if that is the case it is as group label base entities will not aggrigate to parent entity but here few accounts are not aggrigating parent entity.
Thanks / Rama

Grand total values are not matching with Detail report

Report has grand totals and when I drill to the detail report, grand total values are NOT matching with parent report totals, I did some analysis but I'm clueless on this issue.
Please provide your thoughts and insight on this issue..
Thanks

is your summary and detail reports hitting different facts, like summary hitting aggregate and detail report hitting it's corresponding detail level fact..?
if then,
From Front-end:
Fix the filter values in detail report that are passing from master report then try delete each columns then check the grand total. If you found your values is matching by deleting particular column then you need to investigate what is the issue around with that dimension table..
From Database side:
1. check first aggregate table has proper aggregate data of it's detail..
2. Take the detail report obiee generated query and try to comment each dimension table and it's corresponding joins to the facts, (before, this delete all the dimensional columns and other measures from select statement and put only that measure where you are getting wrong value, so that you need not to comment all the select and group by columns which saves your time.. ). Need to check by commenting each dimensional wid and it's table from clause, if you found that values is matching then there is some problem with wid columns data population in your ETL.
Is that BI-Apps project?
btw, whtz ur name?

[svn:osmf:] 11359: Fixing MetadataWatcher not invoking a value change callback when the parent facet of the target value is added or removed .

Revision: 11359
Author:   [email protected]
Date:     2009-11-02 05:20:01 -0800 (Mon, 02 Nov 2009)
Log Message:
Fixing MetadataWatcher not invoking a value change callback when the parent facet of the target value is added or removed.
Modified Paths:
    osmf/trunk/framework/MediaFramework/org/osmf/metadata/MetadataWatcher.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/metadata/TestMetadataUtils.as

mikeporter wrote:
I'm sorry I'm not aware of any "cumbersome" subpanels - unless of course you don't know what you're doing. There is this wonderful invention called a "subVI" that can be used to organize and simplify your code, or are they too "cumbersome" as well? You should really learn a bit about what you are pontificating over before you start running off at the mouth.
Mike...
I didn't want to step on your toes. No need to get personal.
Subpanels make some additional code necessary that hasn't got to do anything with the actual program. And I AM using subIVs as I wrote in my first post, which is exactly the root of the problem.
Nevertheless I now solved it in a way that comes close to what I wanted. I don't know if some of you meant your suggestions to be understood that way (at least I didn't ). The subVIs will now "insert" themselves (via invoke node) into a subpanel on the main vi, which they are given a reference of at call. This adds minimal aditional code, especially on the main VI which I want to keep as clean as possible. By clustering the panel reference into the parameters the subVIs are already given (not used in the example I attached below), there isn't even a change on the terminals of the subVIs.
I got to check now if this works well with event structures within the subVIs or if it can create the same problems like multiple event structures within a single VI.
So no global variables anymore and no writing values by property node. I don't know if this just wasn't possible in previous Labview versions I had a try at that (I guess it was 8.6 and/or 2009) or I just didn't come up with the idea back then.
And if the text wasn't that helpful, here are two screens:
Parent VI:
SubVI:
Attachments:
main.png ‏2 KB
subvi.png ‏5 KB

Avoid child rollup to parent using Business rule

Hi iam new to this hyperion planning.
I want to spread values from parent to child. Once i spreaded the value from parent to child if any other user changed child data it should not be rollup to parent. By using business rule only
Thanks in advance

Then you must not run an aggregation on this data, at least for the dimension that you are spreading on.
If you have a broad aggregation you run you could try fixing on non-Target versions only:
FIX(@UDA("Standard Bottom Up")) before your aggregation should restrict to the versions you are safe to aggregate,

Change Default Export Value to Not "Off"

Hi,
I'm using a form for data collection and have multiple checkboxes. I have it set so that the export value of each checkbox is "1" when checked, but I can't figure out how to change their default export values when not checked. The default is "Off," but I'd like it to be "0." Is there a way to do this (possibly using Javascript)?
Thanks in advance.

The setting I was thinking of is Implied_share
Here is the text from the tech reference
IMPLIED_SHARE
Sets the default implied shared behavior for the Essbase Server, or for the specified application.
This setting does not apply to aggregate storage databases.
Syntax
IMPLIED_SHARE [app_name] TRUE|FALSEapp_name—Optional. If provided, the setting applies only to the specified application; otherwise, the setting applies to the Essbase Server.
TRUE—Default value. Parent is treated as an implied share because it has only one child or because it has only one child that consolidates to the parent.
FALSE—Never use Implied Share unless explicitly set in the outline.
Notes
If the IMPLIED_SHARE configuration setting is absent from Essbase.cfg, the default setting of TRUE is used.
Application-specific settings overrides any general Essbase Server settings.
Outlines settings (specified using the Outline Editor or through the API) override all Essbase.cfg file settings.
You must stop and restart the Essbase Server for it to read any changes to IMPLIED_SHARE settings made in the configuration file.
The outline must be opened, saved, and then restructured for any changes in the IMPLIED_SHARE configuration setting now read by the Essbase Server to take effect.
For IMPLIED_SHARE configuration settings to have any effect, the outline-specific setting must be one of these default values:
ESS_IMPLIEDSHARE_DEFAULT—Outline setting depends on Essbase.cfg. If returned, no IMPLIED_SHARE entry existed in Essbase.cfg at the time the outline was saved.
ESS_IMPLIEDSHARE_DEFAULT_ON—Outline setting depends on Essbase.cfg. If returned, IMPLIED_SHARE was set to TRUE in Essbase.cfg at the time the outline was saved.
ESS_IMPLIEDSHARE_DEFAULT_OFF—Outline setting depends on Essbase.cfg. If returned, IMPLIED_SHARE was set to FALSE in Essbase.cfg at the time the outline was saved.

Translation and overrides value

i am confused, which isn't hard to do. We have a USD currency entity that reports to a BRL currency entity.
In the USD entity we have placed an override value for common stock so that it maintains the same value on BRL regardless of latest exchange rate.
This works fine.
The problem is that at the parent level when we want to look value back in USD it does not give me the vlaue i expect in this case i get $74,000 instead of $77,000
Is this normal?
Parent Entity (Parent) has default currency of BRL
Child Entity (700) has default currency of USD
Enitity Currency BRL USD
Parent $128,000 $128,000 $74,000
i
700 $77,000 $128,000 $ 77,000

Here are the steps:
In <Entity Currency> and <Entity Curr Adjs> of each USD base entitiy (it should be written for all foreign currency entities but that would take more metadata and rules updates)
1) Create a list of [Ancestors] of the entity being calculated
2) If any ancestor is not USD then copy the balance sheet amount to a USD override account (we're assuming that if an ancestor is not USD then that data will at some point need to be translated back to USD)
- This requires that you add USD override accounts similar to your BRL override accounts using the same mapping to the balance sheet account (it does not appear from your rules that these accounts exist) and loop through them to copy the data using that mapping
After translation (HS.Value.IsTransCur) into USD (HS.Value.Currency = "USD")
3) Copy the USD override amounts from the USD override accounts into the corresponding balance sheet accounts (similar to how you are using the BRL overrides but this should not be dependent on whether the USD override amount is 'RealData' so it should always use the current period's amount and not last year's translated ending amount)
A few notes:
It is better to use a custom dimension to separate the override data from the trial balance date. It is more efficient from a consolidation perspective and less maintenance in regards to when new accounts are added or designated to use overrides.
Your rules seem to indicate that you are only using BRL overrides which is unusual for (I'm assuming) a USD application. That would mean there are either no other foreign currency entities are they don't have any equity/investement accounts. The rule I outlined above might not work if other USD overrides are being used.
The way your overrides are written restrict how you can build/change your Entity dimension - all translation into BRL must occur at a base entity or you could get incorrect data. If you had 2 USD entities consolidating to another USD entity and then into a BRL entity and one of those base USD entities had a manually entered BRL override it would use that one override for the entire amount in the BRL parent though it should represent a BRL amount from the 2 USD base entities.
Hopefully you understand that I do not want to attempt to write the above rules given that I am not familiar with your application but I could let you know if you are on the right track if you attempt to write them yourself and show me the rules.
Hope this helps.
Brian
Edited by: Brian Maguire on May 25, 2012 10:31 AM

List of values is not displayed in web inteligence report

I created a web inteligence report and put into my favourite folder. The report consist of a selectable list of values in a prompt but it does not appear in my favourites folder.
The users with administrator rights that copied this report into their own favourites folder are able to see the list of values in the prompt.
It seemed that the list of values does not display in the prompt when non administrator rights opened this report in their own favourites folder.
Anyone can figure out how to set the access rights so that non administrator can see the list of values when the web inteligence report is opened in their own folder.
I am using Business Objects XI 3.1 ..

SOLVED
     CMC -> Connections
-     Right click connection name, Click u201CTools > Check Relationshipu201D
-     In u201CQuery Resultsu201D, Right click Connections, Click u201CUser Securityu201D
-     Assign Security for u201CEveryoneu201D
-     UNTICK both Inherit from Parent Folder and Inherit from Parent Group
-     Assign u201CView on Demandu201D
     CMC -> Universes
-     Right click u201CUniversesu201D folder, click u201CPropertiesu201D
-     Under u201CUser Securityu201D, click Everyone and assign security
-     UNTICK both Inherit from Parent Folder and Inherit from Parent Group
-     Assign u201CView on Demandu201D

EA Version 4.0 - Partition high-values are not displayed (NULL)

The partition high values are not schon in the "partitions" tab of the table. Only NULL was displayed.

Sorry i slept, this is referenced partitioned table. Only in the parent rtable there will be the high-values displayed.

Problem in Passing the value from child window to Parent window.

Hi Frenz,
I have a requirement like this. i have to pass a value from child window to parent window to one test field. That text field is not a normal text field.
It was created like the following as SQL query.
select
''LNo,
apex_item.text(25,'',0,15,
'style="width:100px;" onblur="javascript:showUpsell(this.value);" onkeypress="javascript:validateKeyPress(event,this.value,this.id);" onkeyup="javascript:this.value=this.value.toUpperCase();" id="P37_ITEMNO"') ItemNo
Now i want to pass a value to the Item no from child window.
i wrote the java script like this,
opener.document.forms[0].f25.value="100";
It was not working..Any suggestions for that..
Thanks in advance

Dear Baaju,
How do you redirect your control from Child to Parent window.
If you use a button to do this, then you can set this value in the branching of page.
Rana

WLC Applying cached RADIUS Override values for mobile

Hello!
We have a WiSM2 (version 7.4.110.0) with approx 200 APs. We are doing RADIUS authentication via a PacketFence backend. Everything usually works fine, but we are having an intermittent issue...
The WiSM2 gets its VLAN assignment for a client from the PacketFence server and does AAA override. If a client has not registered their device, go on one VLAN. Once they register, PacketFence disconnects them via RADIUS to the WiSM2, and then they should get their new VLAN assignment. This works fine in the majority of cases, but occasionally, after registering, the client disconnects and reconnects but is still put back on registration VLAN.
debug client mac shows this in the logs:
Applying cached RADIUS Override values for mobile 00:25:56:3d:f6:7b (caller pem_api.c:2210)
And I do not see the WiSM2 asking the PacketFence server for a VLAN assignment in the PacketFence logs.
Eventually, if the client stays disconnected long enough (5+ minutes), they can reconnect and get the proper VLAN assignment. I had previously opened a TAC about this, and they suggested a WiSM2 software upgrade and setting the Session Timeout on the WLAN to 900 seconds, which I did. This issue then disappeared for several weeks, but it has started happening again today (we saw it happen to about 15 clients throughout the day).
Anyone have any ideas on why this is happening, and how to stop the caching? Any thoughts would be greatly appreciated.
Here is the output from a show wlan of one of our WLANs we have seen this on:
WLAN Identifier.................................. 2
Profile Name..................................... BlitzNet
Network Name (SSID).............................. BlitzNet
Status........................................... Enabled
MAC Filtering.................................... Enabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Enabled
Network Admission Control
Client Profiling Status ....................... Disabled
   DHCP ......................................... Disabled
   HTTP ......................................... Disabled
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
Number of Active Clients......................... 538
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 900 seconds
User Idle Timeout................................ 300 seconds
User Idle Threshold.............................. 0 Bytes
NAS-identifier................................... WISM2_SDC
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ blitznet
Multicast Interface.............................. Not Configured
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
mDNS Status...................................... Disabled
mDNS Profile Name................................ unconfigured
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Static IP client tunneling....................... Disabled
PMIPv6 Mobility Type............................. none
Quality of Service............................... Silver
Per-SSID Rate Limits............................. Upstream          Downstream
Average Data Rate................................   0                      0
Average Realtime Data Rate.......................   0                      0
Burst Data Rate..................................   0                      0
Burst Realtime Data Rate.........................   0                      0
Per-Client Rate Limits........................... Upstream          Downstream
Average Data Rate................................   0                      0
Average Realtime Data Rate.......................   0                      0
Burst Data Rate..................................   0                      0
Burst Realtime Data Rate.........................   0                      0
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
Passive Client Feature........................... Disabled
Peer-to-Peer Blocking Action..................... Drop
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
   Authentication................................ ipofradiusserver 1812
   Accounting.................................... Global Servers
      Interim Update............................. Disabled
   Dynamic Interface............................. Disabled
   Dynamic Interface Priority.................... wlan
Local EAP Authentication......................... Disabled
Security
   802.11 Authentication:........................ Open System
   FT Support.................................... Disabled
   Static WEP Keys............................... Disabled
   802.1X........................................ Disabled
   Wi-Fi Protected Access (WPA/WPA2)............. Disabled
   WAPI.......................................... Disabled
   Wi-Fi Direct policy configured................ Disabled
   EAP-Passthrough............................... Disabled
   CKIP ......................................... Disabled
   Web Based Authentication...................... Disabled
   Web-Passthrough............................... Disabled
   Conditional Web Redirect...................... Disabled
   Splash-Page Web Redirect...................... Disabled
   Auto Anchor................................... Disabled
   FlexConnect Local Switching................... Disabled
   flexconnect Central Dhcp Flag................. Disabled
   flexconnect nat-pat Flag...................... Disabled
   flexconnect Dns Override Flag................. Disabled
   FlexConnect Vlan based Central Switching ..... Disabled
   FlexConnect Local Authentication.............. Disabled
   FlexConnect Learn IP Address.................. Disabled
   Client MFP.................................... Optional but inactive (WPA2 not configured)
   PMF........................................... Disabled
   PMF Association Comeback Time................. 1
   PMF SA Query RetryTimeout..................... 200
   Tkip MIC Countermeasure Hold-down Timer....... 60
AVC Visibilty.................................... Disabled
AVC Profile Name................................. None
Flow Monitor Name................................ None
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Enabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Assisted Roaming Prediction Optimization......... Disabled
802.11k Neighbor List............................ Disabled
802.11k Neighbor List Dual Band.................. Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Multicast Buffer................................. Disabled
Mobility Anchor List
WLAN ID     IP Address            Status
802.11u........................................ Disabled
MSAP Services.................................. Disabled

There is nothing in the RADIUS server logs. It is as if the WiSM2 does not talk to it for the 2nd request. The flow for a problem client is like this:
1. New client associates
2. WiSM asks RADIUS server for VLAN
3. RADIUS Server hasn't seen it, so it puts it on VLAN 84 (our registration VLAN)
4. Client goes through captive portal
5. RADIUS server sends disconnect client message to WiSM
6. Client disconnects, reconnects
7. WiSM2 puts it back on VLAN 84, when it should put it on a VLAN determined by the SSID. The WiSM2 never asks the RADIUS server for the VLAN again, until the client has stayed disconnected for 5+ minutes, and I see the message in the wism2 log that I wrote above.
In the vast majority of cases, step 7 works properly. That is, when the client reconnects, it asks the RADIUS server what VLAN to put it on (I see it in the RADIUS server logs). I see the second request come in, and the RADIUS server replies with appropriate VLAN for the SSID.
After they get their proper VLAN, this doesn't occur again. It is as if the RADIUS server caches the client's VLAN override attribute somewhere and uses that, rather than asking the RADIUS server.

Mapping param override values

I have 2 supposedly identical environments running the DAC v 10.1.3.4.1 and Informatica 9, in one environment all is well, in the other a number of vanilla mappings fail because parameters are null. In the environment that doesn't work the session logs shows this:
Severity     Timestamp     Node     Thread     Message Code     Message
INFO     11/06/2012 20:12:59     node01_udapbia1     DIRECTOR     VAR_27027     Use default value [] for mapping parameter:[MPLT_ADI_CODES.$$CATEGORY].
In the environment that does work its shows this:
Severity     Timestamp     Node     Thread     Message Code     Message
INFO     10/06/2012 20:15:27     node01_utapbia1     DIRECTOR     VAR_27028     Use override value ['ABSENCE_TYPE'] for mapping parameter:[MPLT_ADI_CODES.$$CATEGORY].
Clearly the second one works because the the value ABSENCE_TYPE has been substituted, but why isn't it in the first one,this is a vanilla mapping - SDE_ORA_CodeDimension_Absence_Type,it hasn't been changed.
Both environments have identical, paths to indentical parameter files.
The same issue happens for most of the other CodeDimension related mappings.
Many thanks
Ed
Can anyone advise me where these override values are stored and why they are used in one environemnt but not the other, please?

Can check this proparty is set at Integration Service using AdminConsole
overwriteMpltVarWithMapVar=Yes
If it is helpful, please mark as correct or helpful

Error : This balancing segment value is not valid for the current ledger

Dear friend,
Error : This balancing segment value is not valid for the current ledger.
when I click Account Assignment in Budget Organization.
I used R12
Thank you
Best regards,
Hareyuya, Junior.

Hi,
Please see these documents.
Note: 756765.1 - Cannot Use Parent Balancing Segment Values In Massbudget or MassAllocation Formula
Note: 790339.1 - Cannot Select Parent Values In Mass Budgets
Note: 437588.1 - Rel 12: Balancing Segment Value Is Not Valid For Current Ledger
Regards,
Hussein

Default Value is not getting displayed in SUN ONE Ldap

Hello,
I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
The attribute default value is given through SUN ONE Console. But, In our application the default value is not getting displayed.
We need the default value to run our applicatin. Can anyone help me for this issue
Regards,
K. Senthil Kumar

Hi anandkumar,
I belive this issue can be resolved by changing the Query proprties for the perticular field.
Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
__Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
Hope this helps you!!
Best Regards,
Maruthi

Open Sale Order Value (FD33) not getting diminished even after closing SO?

Hi,
Upon Executing FD33 and clicking the status view for a Customer say XYZ , and then choosing EXTRAS-Open Sale Order . Say the value of open sale orders being shown is 75000. Even after closing the open sale orders (By Selecting VA05 and Putting reason for Rejection), and then also the Open Sales Order value is not getting diminished.
What could be the reason ?
Pls help.
Regrds,
Binayak

Hi Binayak,
As mentioned by you, running of Credit re-org program 'RVKRED77' is the only solution for this problem and it is known problem in SAP.
Some precautions
1. Always run the program in background by scheduling a job.
2. The idle time is around midnight when no user is working on SAP.
3. Some time the job fails as some other program may be updating same tables as this program. In such cases re-schedule the job at different time.
4. You may run the program 'RVKRED88' which will simulate without actual updation of credit values.
Hope this clarifies..
Regards,
Madhu.

Override values do not rollup to parent

Similar Messages

Maybe you are looking for