Mapping param override values

I have 2 supposedly identical environments running the DAC v 10.1.3.4.1 and Informatica 9, in one environment all is well, in the other a number of vanilla mappings fail because parameters are null. In the environment that doesn't work the session logs shows this:
Severity     Timestamp     Node     Thread     Message Code     Message
INFO     11/06/2012 20:12:59     node01_udapbia1     DIRECTOR     VAR_27027     Use default value [] for mapping parameter:[MPLT_ADI_CODES.$$CATEGORY].
In the environment that does work its shows this:
Severity     Timestamp     Node     Thread     Message Code     Message
INFO     10/06/2012 20:15:27     node01_utapbia1     DIRECTOR     VAR_27028     Use override value ['ABSENCE_TYPE'] for mapping parameter:[MPLT_ADI_CODES.$$CATEGORY].
Clearly the second one works because the the value ABSENCE_TYPE has been substituted, but why isn't it in the first one,this is a vanilla mapping - SDE_ORA_CodeDimension_Absence_Type,it hasn't been changed.
Both environments have identical, paths to indentical parameter files.
The same issue happens for most of the other CodeDimension related mappings.
Many thanks
Ed
Can anyone advise me where these override values are stored and why they are used in one environemnt but not the other, please?

Can check this proparty is set at Integration Service using AdminConsole
overwriteMpltVarWithMapVar=Yes
If it is helpful, please mark as correct or helpful

Similar Messages

Map params confusion.... What goes in for new value?

I have an action button with several methods dropped into it. In using the following:
Map params = OperationBinding.getParamsMap();
params.put("UserID", userName);
I am receiving errors ... many of them. What exactly is supposed to go in the ( ) after params.put? Im guessing UserID in quotes because that is the paramater name I gave in the named query but where do I get the value that's also required. Here as you can see, I have userName, which is wrong. Please help.
Thanks.

Hi,
the syntax is correct. You don't share the error message which is too bad because there isn't much I see from the posted code.Make sure you didn't misspelled the UserID argument (must be the same case of the method argument - which usually start lower case)
Frank

Java Mapping to override namespace prefix (startPrefixMapping)

Does anyone have an example of using a Java Map to override the default XI namespace prefix. The method startPrefixMapping looks like it might do the job but I can't find any example of how this works.

You can use the Anonymizer Module Processor.
In your adapter, go to the "Modules" tab, than insert a new entry before the default adapter module processor. Enter module name localejbs/AF_Modules/XMLAnonymizerBean and Local Enterprise Bean type. In the parameters tab, enter parameter anonymizer.acceptNamespaces and parameter value '<namespace>' <prefix>. You can enter more than one namespace, like in '<namespace1>' <prefix1> '<namespace2>' <prefix2>.
Note that your namespace must be inside apostrophes by default. If instead you want to use quotes to define the namespace, you must use another parameter before the one above: parameter name anonymizer.quote and in the value enter a single quote ".
To define an empty prefix (meaning, that namespace is the default namespace) use '' (two apostrophes) instead of <prefix> (or "" (two quotes), if you have used anonymizer.quote).
Check SAP Note 880173 for more information.
Regards,
Henrique.

Translation and overrides value

i am confused, which isn't hard to do. We have a USD currency entity that reports to a BRL currency entity.
In the USD entity we have placed an override value for common stock so that it maintains the same value on BRL regardless of latest exchange rate.
This works fine.
The problem is that at the parent level when we want to look value back in USD it does not give me the vlaue i expect in this case i get $74,000 instead of $77,000
Is this normal?
Parent Entity (Parent) has default currency of BRL
Child Entity (700) has default currency of USD
Enitity Currency BRL USD
Parent $128,000 $128,000 $74,000
i
700 $77,000 $128,000 $ 77,000

Here are the steps:
In <Entity Currency> and <Entity Curr Adjs> of each USD base entitiy (it should be written for all foreign currency entities but that would take more metadata and rules updates)
1) Create a list of [Ancestors] of the entity being calculated
2) If any ancestor is not USD then copy the balance sheet amount to a USD override account (we're assuming that if an ancestor is not USD then that data will at some point need to be translated back to USD)
- This requires that you add USD override accounts similar to your BRL override accounts using the same mapping to the balance sheet account (it does not appear from your rules that these accounts exist) and loop through them to copy the data using that mapping
After translation (HS.Value.IsTransCur) into USD (HS.Value.Currency = "USD")
3) Copy the USD override amounts from the USD override accounts into the corresponding balance sheet accounts (similar to how you are using the BRL overrides but this should not be dependent on whether the USD override amount is 'RealData' so it should always use the current period's amount and not last year's translated ending amount)
A few notes:
It is better to use a custom dimension to separate the override data from the trial balance date. It is more efficient from a consolidation perspective and less maintenance in regards to when new accounts are added or designated to use overrides.
Your rules seem to indicate that you are only using BRL overrides which is unusual for (I'm assuming) a USD application. That would mean there are either no other foreign currency entities are they don't have any equity/investement accounts. The rule I outlined above might not work if other USD overrides are being used.
The way your overrides are written restrict how you can build/change your Entity dimension - all translation into BRL must occur at a base entity or you could get incorrect data. If you had 2 USD entities consolidating to another USD entity and then into a BRL entity and one of those base USD entities had a manually entered BRL override it would use that one override for the entire amount in the BRL parent though it should represent a BRL amount from the 2 USD base entities.
Hopefully you understand that I do not want to attempt to write the above rules given that I am not familiar with your application but I could let you know if you are on the right track if you attempt to write them yourself and show me the rules.
Hope this helps.
Brian
Edited by: Brian Maguire on May 25, 2012 10:31 AM

How to map a missing value to a member?

Hi all,
Let say I have 3 dimensions in my data source file:
Account, Entity, Product, Data
A400, E100, P200, 10000
A401, E110, P300, 20000
A401, ,P400, 30000
As you can see in the third record, Entity is missing. How can I map this to, let's say, No_Entity? In my Entity mapping table, Type: Like, I have tried using Null and Missing as the Rule Definition, but neither worked.
Couple of clarifications: This is for an Essbase BSO cube. In my real case, the missing values are not Entity members, but 3 custom dimension members.
Any ideas?
We are on 11.1.2.2.
Thanks,
Mehmet

You have a couple of options:
1) Add a wilcard mapping to your entity maps which maps anything you have not explicitly mapped to NoEntity i.e. * --> NoEntity
2) You cannot have an empty string as a source value so in your import format, associate an import script with the Entity dimension source field entry and check the length of the string of the source field as it comes in. If the length is 0 assign a value of NoEntity to be returned and map that source value explicitly inyour Entity map

Need of value mapping and fixed values in (conversions)under graphical map

hi.
helo all.
i just want to know what is the need of value mapping and fixed values in (conversions)under graphical mappping.
can any body explain me with real time example .
waiting for your response.
bye.
regards.
seeta ram.

Hi Seetha Ram,
Value mapping: Where we maintain a table of values which are mapped.
based on the incoming value we can send the respective resultant value.
for Eg: for language SAP maintains as EN --> English etc
can u refer these
http://help.sap.com/saphelp_nw04/helpdata/en/2a/9d2891cc976549a9ad9f81e9b8db25/frameset.htm
Re: Value mapping table
Thanks and Regards
Harsha Vardhan.P
**Reward points if found useful**

How to map the Resultset values to multiple tags on target strcture

Hi All,
We have an UDF ,whihc is returing Resultset . How do we map/extract the each element of resultset to diffrent fields on the target strcure in graphical mapping.
Let me know,if any blog exist for same.
Thanks for your support and advice.
MK

Hi,
you should be having some condition based on which you will map your resultset values to different target fields.......so have that condition as an input to your UDF in graphical mapping.............then use this condition value in your UDF and output the data which should come on this condition in the resultset..........then in graphical mapping, map your target fields with this UDF and condition and output the UDF output to the target node.........
Regards,
Rajeev Gupta

How to map single context value attribute to multiple value attributes?

Hello,
is there any way to map a single value attribute
from view's context into several value attributes
in controller's context?
The business context of what I want to achieve
is the following: I have a view which can be called
in two modes: read only (RO) and read-write (RW).
The input parameters to the view are the same for
both modes, however when in RO mode, the view calls
a different set of web services than when called
in RW mode. Before calling each of the web services
I need to populate their context value attributes
with appropriate input values.
I know I can do it in Java code, but is it possible
to do it without any programming (doing it in the
source code is prone to errors)?
Any help highly appreciated.
Greetings,
Tomek.

Hi Kishore,
than you very much for your kind help.
I have already created a value attribute of type
boolean and mapped it into the read-only property
of the UI elements. This however does not solve all
of the problems... I will describe it with an
example:
Let's say the form I want to implement will be
used to: create (read-write mode), update (read-
write mode) or show (read-only mode) customer's
data. The customer's data is complex (lots of
data, including tree structures).
The problem is that:
- when the form is called in read-only mode,
it should populate its fields with values
provided by the getCustomerData web service,
- when the form is called to create a new
customer (in read-write) mode, it should
not use the getCustomerData web service.
Instead it should map the input values
entered by the user into input parameters
of the createNewCustomer web service,
- when the form is called to update customer's
data, it should first display values returned
by the getCustomerData web service, and then
it should map the modified values entered by
the user into input parameters of the
updateCustomer web service,
In all the above cases I must map my view's
context data to different controller's context
elements. Doing it directly in the source code
is not a nice solution. Is there any other
way to achieve this?
Calling a form in different modes in not an
unusual thing, so I was hoping that maybe
there are any built-in mechanisms that would
solve the obove problem...
Greetings,
Tomek.

WLC Applying cached RADIUS Override values for mobile

Hello!
We have a WiSM2 (version 7.4.110.0) with approx 200 APs. We are doing RADIUS authentication via a PacketFence backend. Everything usually works fine, but we are having an intermittent issue...
The WiSM2 gets its VLAN assignment for a client from the PacketFence server and does AAA override. If a client has not registered their device, go on one VLAN. Once they register, PacketFence disconnects them via RADIUS to the WiSM2, and then they should get their new VLAN assignment. This works fine in the majority of cases, but occasionally, after registering, the client disconnects and reconnects but is still put back on registration VLAN.
debug client mac shows this in the logs:
Applying cached RADIUS Override values for mobile 00:25:56:3d:f6:7b (caller pem_api.c:2210)
And I do not see the WiSM2 asking the PacketFence server for a VLAN assignment in the PacketFence logs.
Eventually, if the client stays disconnected long enough (5+ minutes), they can reconnect and get the proper VLAN assignment. I had previously opened a TAC about this, and they suggested a WiSM2 software upgrade and setting the Session Timeout on the WLAN to 900 seconds, which I did. This issue then disappeared for several weeks, but it has started happening again today (we saw it happen to about 15 clients throughout the day).
Anyone have any ideas on why this is happening, and how to stop the caching? Any thoughts would be greatly appreciated.
Here is the output from a show wlan of one of our WLANs we have seen this on:
WLAN Identifier.................................. 2
Profile Name..................................... BlitzNet
Network Name (SSID).............................. BlitzNet
Status........................................... Enabled
MAC Filtering.................................... Enabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Enabled
Network Admission Control
Client Profiling Status ....................... Disabled
   DHCP ......................................... Disabled
   HTTP ......................................... Disabled
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
Number of Active Clients......................... 538
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 900 seconds
User Idle Timeout................................ 300 seconds
User Idle Threshold.............................. 0 Bytes
NAS-identifier................................... WISM2_SDC
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ blitznet
Multicast Interface.............................. Not Configured
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
mDNS Status...................................... Disabled
mDNS Profile Name................................ unconfigured
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Static IP client tunneling....................... Disabled
PMIPv6 Mobility Type............................. none
Quality of Service............................... Silver
Per-SSID Rate Limits............................. Upstream          Downstream
Average Data Rate................................   0                      0
Average Realtime Data Rate.......................   0                      0
Burst Data Rate..................................   0                      0
Burst Realtime Data Rate.........................   0                      0
Per-Client Rate Limits........................... Upstream          Downstream
Average Data Rate................................   0                      0
Average Realtime Data Rate.......................   0                      0
Burst Data Rate..................................   0                      0
Burst Realtime Data Rate.........................   0                      0
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
Passive Client Feature........................... Disabled
Peer-to-Peer Blocking Action..................... Drop
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
   Authentication................................ ipofradiusserver 1812
   Accounting.................................... Global Servers
      Interim Update............................. Disabled
   Dynamic Interface............................. Disabled
   Dynamic Interface Priority.................... wlan
Local EAP Authentication......................... Disabled
Security
   802.11 Authentication:........................ Open System
   FT Support.................................... Disabled
   Static WEP Keys............................... Disabled
   802.1X........................................ Disabled
   Wi-Fi Protected Access (WPA/WPA2)............. Disabled
   WAPI.......................................... Disabled
   Wi-Fi Direct policy configured................ Disabled
   EAP-Passthrough............................... Disabled
   CKIP ......................................... Disabled
   Web Based Authentication...................... Disabled
   Web-Passthrough............................... Disabled
   Conditional Web Redirect...................... Disabled
   Splash-Page Web Redirect...................... Disabled
   Auto Anchor................................... Disabled
   FlexConnect Local Switching................... Disabled
   flexconnect Central Dhcp Flag................. Disabled
   flexconnect nat-pat Flag...................... Disabled
   flexconnect Dns Override Flag................. Disabled
   FlexConnect Vlan based Central Switching ..... Disabled
   FlexConnect Local Authentication.............. Disabled
   FlexConnect Learn IP Address.................. Disabled
   Client MFP.................................... Optional but inactive (WPA2 not configured)
   PMF........................................... Disabled
   PMF Association Comeback Time................. 1
   PMF SA Query RetryTimeout..................... 200
   Tkip MIC Countermeasure Hold-down Timer....... 60
AVC Visibilty.................................... Disabled
AVC Profile Name................................. None
Flow Monitor Name................................ None
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Enabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Assisted Roaming Prediction Optimization......... Disabled
802.11k Neighbor List............................ Disabled
802.11k Neighbor List Dual Band.................. Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Multicast Buffer................................. Disabled
Mobility Anchor List
WLAN ID     IP Address            Status
802.11u........................................ Disabled
MSAP Services.................................. Disabled

There is nothing in the RADIUS server logs. It is as if the WiSM2 does not talk to it for the 2nd request. The flow for a problem client is like this:
1. New client associates
2. WiSM asks RADIUS server for VLAN
3. RADIUS Server hasn't seen it, so it puts it on VLAN 84 (our registration VLAN)
4. Client goes through captive portal
5. RADIUS server sends disconnect client message to WiSM
6. Client disconnects, reconnects
7. WiSM2 puts it back on VLAN 84, when it should put it on a VLAN determined by the SSID. The WiSM2 never asks the RADIUS server for the VLAN again, until the client has stayed disconnected for 5+ minutes, and I see the message in the wism2 log that I wrote above.
In the vast majority of cases, step 7 works properly. That is, when the client reconnects, it asks the RADIUS server what VLAN to put it on (I see it in the RADIUS server logs). I see the second request come in, and the RADIUS server replies with appropriate VLAN for the SSID.
After they get their proper VLAN, this doesn't occur again. It is as if the RADIUS server caches the client's VLAN override attribute somewhere and uses that, rather than asking the RADIUS server.

Override values do not rollup to parent

I'm getting some confusing results. i have an account for which i have overrides values. The children work nicely, the problem is that the parent does not add the override amounts, it calcs it own value based on the current exchange rate.
Is that the way it's suppose to be or am i missing something
Thanks in advance
Exchange Rate assume it .075
Entity Currency USD
Parent 1500 112.50
Child 1 1000 100
Child 2 500 50

Guys this is HFM Consolidation hope there is no time balance settings in accounts attributes and we have not mentioned grouplabel to parent entity if that is the case it is as group label base entities will not aggrigate to parent entity but here few accounts are not aggrigating parent entity.
Thanks / Rama

Value Mapping and Dynamic Value Mapping

Hi Experts,
Could you please give a example for Value Mapping and Dynamic Value Mapping?
Regards
Sara

Sara,
I am assuming that you are going to use the Receiver JDBC adapter to select the data from the database.
In this case, take a look at this blog of mine to understand how te dataypes should be created for the request and response JDBC Select Query.
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
The only difference would be that in the mapping when you create the Request Message for the JDBC adapter, the columns you create would be determined from the Source,
i.e, if value = 1 , only the required Columns should be mapped as Blank constants,
likewise for the other requirement.
the columns you do not want to select you should not create them in theoutput of your request mapping.
Regards
Bhavesh

How to map single input value to Two columns of Database table using format file of Bulk Copy Process

Hi All,
Am using OPENROWSET to load the file data into table, here the problem is i need to map same input value to two different columns of table, As format file doesn't allow the duplicate numbers am unable to insert same value to two columns, please help me to
find a solution for this.
i can use only OPENROWSET because i need to insert some default values also which come based on file. only the problem is how to map same input value to two different columns of table. please give me the suggestions.
Thanks,
Sudhakar

From what you say:
INSERT tbl(col1, col2)
SELECT col1, col1
FROM OPENROWSET(....)
But I guess it is more difficult. You need to give more details. What sort of data source do you have? What does your query look like? The target table?
Erland Sommarskog, SQL Server MVP, [email protected]
Hi Erland,
Thanks for your response
my source file is text file with | symbol separate for ex:
1002|eTab |V101|eTablet|V100|Logic|LT-7|Laptops|SCM
Database table have columns like
column1,column2,column3...etc, now i need to insert same value from input file into two columns for ex:
the eTab value from text file has to be insert into column2 and column3 of
table
we cannot change format file like below one
for the above situation how can we insert eTab into column2 and column3
Thanks,
Sudhakar.

Can JWS accept somekind of param's values from JavaScript

Like in Applet we could pass a param's value from JavaScript. Is it possible to do something similar to JWS?.
Thanks.

Java Web Start is implemented as a browser helper application, the browser downloads
the jnlp file, and launches javaws with that downloaded temp file as an arg. Because of this
you cannot pass args to javaws except thru the jnlp file.
The most common way to dynamically generate args and parameters to a javaws app is
to dynamically generate the jnlp file use a jsp page or a servlet.

Is there a standard map sorted by values

Tree Map is sorted by keys..Is there standard jdk map sorted by values ?

You can also use a method similar to the following:
private static final Collator PL_COLLATOR = Collator.getInstance(new Locale("PL"));
 public static <E> Map<E, String> sortMapByValue(Map<E, String> unordered) {
 Map<E, String> ret = new LinkedHashMap<E, String>();
 Set<Entry<E, String>> sort = new TreeSet<Entry<E, String>>(new Comparator<Entry<E, String>>() {
 public int compare(Entry<E, String> o1, Entry<E, String> o2) {
 Entry<E, String> e1 = o1;
 Entry<E, String> e2 = o2;
 String s1 = e1.getValue();
 String s2 = e2.getValue();
 return PL_COLLATOR.compare(s1.toLowerCase(), s2.toLowerCase());
 sort.addAll(unordered.entrySet());
 for (Iterator<Entry<E, String>> iterator = sort.iterator(); iterator.hasNext();) {
 Entry<E, String> e = iterator.next();
 ret.put(e.getKey(), e.getValue());
 return ret;
 }

Redirection causes loss of param/attribute values

Hello I am new to JSF and I have a few questions regarding the same .
I am using (JSf-struts) for a web application in which I redirect a page (in the config class) .I am not able to access param/attribute values in the action class after redirection.
Does redirection cause the loss of param values , if so what should be the remidy.
If I want add an attribute (with session scope) how do I add it in the JSF
can I do something like this ....
<f:param name="datasets" scope="session" value="Master.txt" />

Put in session
FacesContext.getCurrentInstance().getExternalContext().getSessionMap().put(key,
obj);

Mapping param override values

Similar Messages

Maybe you are looking for