OVMM 2.2 "Save as Template" Error messages

Hi,
does anyone can tell me where to find the log files from the procedure "Save as Template".
I try to migrate a VM from an OVM 2 to OVM 3 and an metalink how to instruct me to save the VM as a template.
The process start and after it finished the state of the template is Error. I do not find any additional information
regarding these error.
Thanks !
*T

on the ovmS /var/log/ovs-agent

Similar Messages

ME_PROCESS_PO_CUST allows save in ME21n - error message triggered

All,
Purchase order is getting saved even though there are error messages triggered via BADI in the POST method.
I've tried both:
MMPUR_MESSAGE_FORCED 'A' 'ME' '303' TEXT-001 '' '' '' .
MMPUR_MESSAGE_FORCED 'E' 'ME' '303' TEXT-001 '' '' '' .
Still the purchase order gets saved when the save button is clicked.
Any ideas
Meghna

Hi Meghana,
You can use method CHECK. I am using CHECK method and able to raise a error message.
Sample code I am using is as follows:
DATA i_items TYPE purchase_order_items.
DATA: wa_item LIKE LINE OF i_items ,
lv_if_item TYPE REF TO if_purchase_order_item_mm ,
lt_itm_data TYPE mepoitem ,
lv_table_count TYPE i .
To get Header Data
ls_header1 = im_header->get_data( ).
To get item data
    CALL METHOD im_header->get_items
      RECEIVING
        re_items = i_items.
Get actual line item data using Hask Key for line item
    READ TABLE i_items INTO wa_item INDEX 1.   --- you can use LOOP as per your requirement
    lv_if_item = wa_item-item.
    CALL METHOD lv_if_item->get_data
      RECEIVING
        re_data = lt_itm_data.
IF ( v_result > 10000 ) . " If the difference between net-prices is more than 10000 then gives Error message
        MESSAGE e368(00) WITH 'Tolerance is more than $10000' .
ENDIF.
Let me know if you need further help.
Thanks & Regards,
Anil Salekar

Ds4 can't save files. Error message: while executing onload in_opOpen.htm

All of a sudden I'm getting this error message. I can view files and create files but can no longer save files.
If I try to save a file, I get the following message:
Full text of message: While executing onLoad in_opOpen.htm, the following Javascript error(s) occurred: In file "_opOpen": onOpen is not defined
If I click ok in the alert,
The following translators were not loaded due to errors:
ASP.html has configuration information that is invalid.
Data.htm: has configuration information that is invalid.
ICERegionals.htm has configuration information that is invalid
Not sure how these were corrupted. How do I fix this problem? The resolutions I've found on line are not working.An example: delete the file called ‘WinFileCache-[random numbers].dat’.. That did not work. I'm using Windows 7 Professional.

If you've already tried clearing the cache file and personal config folder: Deleting a corrupted cache file
A good next step would be restoring preferences: Restore preferences | Dreamweaver CS4, CS5, CS5.5, CS6
Here are some other troubleshooting steps: http://helpx.adobe.com/dreamweaver/kb/troubleshoot-javascript-errors-dreamweaver-cs4.html
If nothing works, a clean reinstall will probably do the trick: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Can't save a file; error message says file couldn't be opened

Using Pages '09 ver. 4.3 and OSX 10.8.4
When I try to save a new document in pages, I get an error message that says "the file 'xxxx.pages-tef" couldn't be opened.
How can I fix this so that I can start saving files again?

Pages 5.2 Mac OSX 10.9.2
Start Pages app
Create a blank document
File > Save or <Command>+S
Select Mac Device and find your user folder or favorite, Desktop (not iCloud)
Error: the file "Untitled.pages" couldn't be opened!?!
Repeat giving the document a different name and it works
Since when do we write error messages with "n't"?
Usually a well written error message offers a suggestion as to what you might do about it?
Since it says opened and I clicked on Save, there is a bug in there somewhere.
All I was trying to do today was copy and paste some text from a website into numbers spreadsheet
Both Edit > Paste options but the text in one cell so I tried to save it as a text file first to try and import the data
Text Edit does not have a text only export format so before loading Terminal and starting vi or emacs, I tried pages. I'll go try XCode's editor or my Windows 7 vm with notepad and openoffice
I miss the old Pages with the Appleworks importer, this one needs more Quality Assurance Testing IMHO
WWSJD "What Would Steve Jobs do?"

Can't save from editor; error message

I use Windows and have Elements 5.
Every time I try to save an edited photo I get an error message that reads, "Problem accessing Organizer Catalog. It may be in use by another process or disk error occurred."
I can't save any edits.
Thank you!
Sharon

Try repairing the catalog through File->Catalog->repair.In case you uncheck the options to include the edited image in organizer and don't form the version set then also are you getting the error.

Approval Templates Error Message

Hello Expert,
I am a new user of SAP B1:
I need a user to be able to create A/P Invoice Draft instead of posting the A/P Invoice to G\L...
When I go to Administration>Approval Procedures>Approval Templates, I have a list of users who usually create A/P Invoice Draft for Approval..., I notice that the user who have to create draft is not listed.
When I insert the user in the list, sap return this error message after clicking on 'Update Button' :
*Fixed terms cannot be selected when the 'use terms flag' is false Message 3621-12*
How can I resolve this issue?...
Thank you...
Ben

Hi Ben,
Please check the following Notes if they help in your case/senario :
[Note No. 1024874|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1024874]
AND
[Note No. : 1144345|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1144345]
Check if it helps.
Regards,
Jitin
SAP Business One Forum Team

Can't paste into template - error message

I've got a site that was made years ago (I inherited it). I'm
converting it to CSS.
I made a template, but when I try to copy and paste from the
old web pages into an editable region I get an error message:
"Making this change would require changing code that is
locked by a template or a translator. The change will be
discarded."
If I copy one paragraph at a time, it will work. Below is an
example. If I copy just the Viewing Distance..., it's ok. Likewise
with Reprinted from... Both of them at a time won't work.
Viewing Distance at Computer
Workstations<br></font>
<font color="#000080" face="Arial" size="4">(Guidelines
for monitor placement)<br>
</font></big></strong></p>
<p><em><font face="Arial">Reprinted from
WorkPlace Ergonomics, Sept./Oct. 1996, p. 10-12, by permission.
How can I efficiently strip out the code that is causing the
problem? I've tried a few things that have not worked.
Thanks.

Here's why nothing is working -

DW thinks that this Template file is OUTSIDE the root of this
site. You
have other similarly broken links on this page suggesting
that your Local
site's definition is incorrect.
You also have oodles of Template parameters defined. Why?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"DennyA" <[email protected]> wrote in
message
news:[email protected]...
> It is a child. I had validated the page. I found a few
problems and fixed
> them
> but that didn't solve the problem. I just noticed that
the editable region
> is
> outside of the main content section in the code. I made
the changes in
> design
> view, so I don't know for sure if that's an error. I
tried putting the
> editable
> region within the main content section, but that didn't
seem to work
> either.
>
> I've attached the code. I could go back and start from
scratch and check
> it
> after every change, but I'd like to figure out the
problem. I'm also
> taking
> chemo pills which are making me easily fatigued.
> Thanks.
>
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=utf-8" />
> 
> <title>Untitled Document</title>
> 
> <link href="file:///H|/1-office-ergo/style.css"
rel="stylesheet"
> type="text/css" />
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> <meta name="Keywords" content="office ergonomics,
ergonomics, offices,
> computers, computer ergonomics, keyboards, monitors,
eyestrain, eye
> strain,
> back pain, lower back, lower backs, back strain, chairs,
sitting,
> ergonomic
> chairs, ergonomic seating, alternative keyboards, mice,
ergonomic mice,
> offices, computers, split keyboards, chord keyboards,
ergonomic keyboards,
> natural keyboards, NIOSH, keyboards, alternative
keyboards, split
> keyboards,
> chord keyboards, ergonomic keyboards, natural keyboards,
keyboards,
> alternative
> keyboards, ergonomic keyboards, natural keyboards,
viewing distance,
> office
> lighting, computer workstations, CVS, computer vision
syndrome, office
> chairs"
> />
> </head>
>
> <body class="thrColHybHdr">
>
> <div id="container">
> <div id="header">
> <h1><font face="Arial, Helvetica, sans-serif"
color="#000080"
> size="5">Office Ergonomics
Training</font></h1>
> </div>
> <div id="sidebar1">
> <p><a href="
http://office-ergo.com/index.html"
> class="holder">Home</a></p>
> <p><a href="
http://office-ergo.com/12things.htm"
class="holder">Low
> back
> pain ergonomics</a></p>
> <p><a href="
http://office-ergo.com/12things1.htm"
> class="holder">Eyestrain
> basics</a></p>
> <p>Viewing distance</p>
> <p><a href="
http://office-ergo.com/setting.htm"
class="holder">Monitor
> placement and lighting</a></p>
> <p><a href="
http://office-ergo.com/alternat.htm"
class="holder">Hand
> and
> arm basics</a></p>
> <p><a href="
http://office-ergo.com/pros-cons.htm"
> class="holder">Ergonomic
> products: pros/cons</a></p>
> <p><a href="
http://office-ergo.com/power.htm"
class="holder">Being
> effective</a></p>
> <p><a href="
http://office-ergo.com/conventi.htm"
> class="holder">Conventional vs. current
wisdom</a></p>
> <p><a href="
http://office-ergo.com/ergonomic_seating.htm"
> class="holder">Ergonomic chairs</a></p>
> <p><a href="
http://office-ergo.com/12things2.htm"
> class="holder">Alternative
keyboards</a></p>
> <p><a href="
http://office-ergo.com/a.htm"
class="holder">A
> checklist</a></p>
> <p><a
> href="
http://office-ergo.com/SolvingtheProblemsofVDTReflections.htm"
> class="holder">Solving VDT Reflections (Mark
Rea)</a></p>
> <p><a href="
http://office-ergo.com/goodergo.htm"
class="holder">Good
> ergo
> links</a></p>
> <p><a href="
http://office-ergo.com/good.htm"
class="holder">Good
> periodicals</a></p>
>
>
> </div>
> <div id="sidebar2">
>
> </div>
> <div id="mainContent">
> <p>
> 
> </p>
> </div>
> <br
> class="clearfloat" />
> <div id="footer">
> <p><a href="
http://www.ankrumassociates.com">Ankrum
Associates</a>
> Oak
> Park, Illinois USA</p>
> </div>
> </div>
> </body></html>
>

Suddenly can't save project, getting error message. VERY FRUSTRATING!!

I've been working on a project for a client over the last couple of weeks and is nearing completion. Everything was working great, when suddenly I tried saving and I got the error message:
"An error occurred. Please save your work and restart Edge Animate."
Please help, this is very aggravating!
If I have to restart or can't get this problem fixed soon, I won't make the deadline for my client.
I am willing to send the project file to anyone who feels they can help.

Your project is broken on Edge Animate CC (2.0.1). You can try clearing your preferences to see if that clears it up for you:
http://helpx.adobe.com/edge-animate/kb/restore-preferences-edge-animate.html
I'm still working with a developer to see if something weird happened with your project.
Thanks,
-Elaine

Fill-in PDF forms and save with no error messages. How?

I've saved a Reader Extended PDF enabling form fill-in and save, but users report error saying, "WITHOUT THE OWNER PASSWORD YOU DO NOT HAVE PERMISSION TO SAVE THIS DOCUMENT." What do I need to do enable them to fill-in and save with no errors?

BTW, most users of this form (which was created in Adobe Acrobat v. XI on a Mac w/iOS version 10.7.5) have no problem with it. Only certain users (on Macs) have this "password required" error show up. How do I make it workable for everyone, including these Mac users?

Can't Save on palm error message

I will apologize in advance if i am not posting this in the correct section, i couldn't find a section that seemed to fit my question. I use a tungsten E2 palm I synched the palm and what i synched was excel files. I was able to enter my information into the palm excel file however when i went to save the edits to the excel file i got a message on the pam "An unexpected error occured! Error number 0x07371BFF" Does any one know why i can't save new info entered into excel file on palm?
thanks in advance for anyone who helps Jenn
Post relates to: Tungsten E2

Most Docs To Go errors can be fixed by reinstalling the Palm components for the program.
Open the computer client of Docs To Go on your PC, then go up to Tools/Reinstall Palm programs. Hotsync, then try the task again.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Error message when saving a file in DW -CS6

When I go to save a file in Dreamweaver CS6, using Windows 7 -
I get this error message.
"While Executing onLoad in bc_afterSave.htm, the follwing javascript errors occured"
In File "bc_aftersave.htm";
onload is not defined
Everything was fine for years now I get this annoying error message. The file saves but the error message always pops up.
I am using the Adobe Application Manager and getting my software through the Adobe Cloud.
I tried deleting the configuration file with th expectation that DW would automatically create a new one but that did not work.
I'd hate to have to unintsall and reinstall DW because I have dozens of sites that I would need to resetup
Any help on this??

bc_aftersave.htm is a file that lies within Dreamweaver's Configuration Commands. Usually is required when working with Business Catalyst.
The error you see may be caused due to a faulty file.
I'm attaching the file at fault - 'bc_aftersave.htm' in this thread. Download and restore it to the following folder:
C:\Users\<username>\AppData\Roaming\Adobe\Dreamweaver CS6\<language>\Configuration\Commands
Locate the file bc_aftersave.htm, replace that file with the one I'm attaching here to see if it solves the issue.
-ST

Production Order with follow-up material unble to save due to error CKBK009

Dear Expert,
When we apply discontintion/follow-up material setting, production order is not able to save. <b>Error message "CKBK009 - No price could be determine for material....."</b>.
<b><u>SAP Help indicates :</u></b>
"No price could be determined for material .......... Message no. CKBK009
<b>Diagnosis :</b>
The system could not determine a price for valuation view 0, because no valuation
strategy succeeded from valuation variant 006.
<b>System Response :</b>
Since the input quantity is zero for this material item, the costing result is not
affected by this error at the pricing stage.
The standard system defines this message as an error message. However, you
can use user-defined error management to specify that the message is a warning
or an information message, or that it is not issed at all.
<b>However, in Controlling's User-Defined Error Management, CKBK009 is already warning only.
What other setting is needed ?</b>
Thanks for helping !

Dear all,
        Manage to solve the problem via Note 1008643, per following.
       <b> THANK YOU for all your guidance & Have a nice day !</b>
<u><b>NOTE 1008643 :</b></u>Symptom
In a production order error message CKBK-009 is raised during cost calculation.
This message cannot be modified into a warning or information message.
Other terms
CKBK009, CO01, CO02, CO03
Reason and Prerequisites
System design
Solution
Please make a new entry in TA OPR8 with the following characteristics:
ErrorManagID    ApplicationArea   MsgNo MinMsgType    MaxMsgType
PPCO            CKBK              009
Then run TA OPR4_PPCO to modify the message type for CKBK009.

Sql Developer 1.5 error message

Hi %,
I've just installed sql developer 1.5; but every time I start it and everytime I open a directory in the file browser a window pops up with the title "Windows - no disk" and the error message "Exception Processing Message c0000013 Parameters <some hex>".
What can I do?
best regards
Andreas

Hello,
I have the same problem since I virtualized my desktop machine and no longer have a floppy drive in the VMware. I started digging around for the use of any "a:" references in the SQL developer config files and I found some in the file
"Files.jpr"
found in
"%appdata%\SQL Developer\system1.5.4.59.40\o.sqldeveloper.11.1.1.59.40" (open a console and type "echo %appdata%" to get the location on your machine)
it will looke like this:
<?xml version = '1.0' encoding = 'UTF-8'?>
<jpr:project xmlns:jpr="http://xmlns.oracle.com/ide/project">
<hash n="oracle.jdeveloper.runner.RunConfigurations">
<hash n="runConfigurationDefinitions">
<hash n="Standard">
<value n="custom" v="false"/>
<value n="name" v="Standard"/>
</hash>
</hash>
<list n="runConfigurationList">
<string v="Standard"/>
</list>
</hash>
<hash n="RaptorFiles">
<list n="pattern-filters">
<string v="+**"/>
</list>
<list n="url-path">
<url path="../../../../../../"/>
<url protocol="file" path="/D:/"/>
<url protocol="file" path="/I:/"/>
<url protocol="file" path="/M:/"/>
<url protocol="file" path="/S:/"/>
<url protocol="file" path="/T:/"/>
<url protocol="file" path="/U:/"/>
<url protocol="file" path="/X:/"/>
<url protocol="file" path="/Y:/"/>
<url protocol="file" path="/Z:/"/>
</list>
</hash>
</jpr:project>
Just delete the "<url protocol="file" path=..." lines with drive letters no longer present on your system, save and the error message should be gone.
Regards,
Stefan

Error message:FRM-12001: Cannot Create the record group(check your query)

Requirement: Need to get employee name and number in the LOV in search criteria.
So I created LOV "full_name" and Record group Query under Employee Name property palette with
select papf.title||' '||papf.last_name||', '||papf.first_name||' '||papf.middle_names emp_full_name
,papf.employee_number
from apps.per_all_people_f papf, apps.per_person_types ppt
where sysdate between papf.effective_start_date and papf.effective_end_date AND papf.person_type_id=ppt.person_type_id AND ppt.system_person_type IN ('EMP', 'OTHER', 'CWK','EMP_APL')
AND PPT.default_flag='Y' and papf.BUSINESS_GROUP_ID=1
order by papf.full_name
I was unable to save and getting error message "FRM-12001: Cannot Create the record group(check your query)".
I cant use PER_ALL_PEOPLE_F.FULL_NAME since full name here is last_name||title||middle_names||firstname.
But my requiremnet is papf.title||' '||papf.last_name||', '||papf.first_name||' '||papf.middle_names emp_full_name .
Can any one of you help me.

First, Magoo wrote:
<pre><font face = "Lucida Console, Courier New, Courier, Fixed" size = "1" color = "navy">create or replace function emp_full_name ( p_title in varchar2,
p_last_name in varchar2,
p_first_name in varchar2,
p_mid_names in varchar2 ) return varchar2 is
begin
for l_rec in ( select decode ( p_title, null, null, p_title || ' ' ) ||
p_last_name || ', ' || p_first_name ||
decode ( p_mid_names, null, null, ' ' || p_mid_names ) full_name
from dual ) loop
return ( l_rec.full_name );
end loop;
end;</font></pre>
Magoo, you don't ever need to use Select from Dual. And the loop is completely unnecessary, since Dual always returns only one record. This would be much simpler:
<pre><font face = "Lucida Console, Courier New, Courier, Fixed" size = "1" color = "navy">create or replace function emp_full_name
( p_title in varchar2,
p_last_name in varchar2,
p_first_name in varchar2,
p_mid_names in varchar2 ) return varchar2 is
begin
Return ( Ltrim( Rtrim ( p_title
||' ' ||p_last_name
||', '||p_first_name
||' ' ||p_middle_names )));
end;</font></pre>
And second:
user606106, you did not mention how you got your record group working. However, you DO have an issue with spaces. If you change this:
<pre><font face = "Lucida Console, Courier New, Courier, Fixed" size = "1" color = "navy">select papf.title||' '||papf.last_name||', '||papf.first_name||' '||papf.middle_names emp_full_name
,papf.employee_number </font></pre>
to this:
<pre><font face = "Lucida Console, Courier New, Courier, Fixed" size = "1" color = "navy">select Ltrim(Rtrim(papf.title||' '||papf.last_name||', '
||papf.first_name||' '||papf.middle_names)) AS emp_full_name,
papf.employee_number</font></pre>
it should work. The Ltrim(Rtrim()) removes leading and trailing spaces from the resulting full name.

Item 000010 does not exist - Error Message V1331 in VA41

Dear Experts,
We r implementing PS module for a client.
I am using a exit MV45AFZZ, in which i have a perform ZVALIDATEWBS, i am calling this include through a subroutine.
In this ZVALIDATEWBS routine -> i have validated 2 conditions
1. Validation for Partner function and
2. Validation for WBS element.
For 1 ---> I am comparing with VBPA partner and throwing error message if the partner entered doesnt match with the project code
For 2 ---> i am checking the status in JEST table if STAT = 'I001' and INACT field = 'X' for a object number i am throwing error as " WBS must be in u2018 Created-CRTDu2019 status".
The problem which iam facing is...
After entering the line item and WBS for the material and after doing Incompletion log and pressing save i am getting a error stating
"Item 000010 does not exist" ( Message no. V1331)
When i comment the error message which is thrown in my exit i am able to save without any error message, i am not getting the standard error - "Item 000010 does not exist" (Message no V1331).
When i debug the code i am not able to predict, becuse if i comment the messages(only message not the whole exit) the standard program called is different, when i uncomment and check them its going for some different program.
Kindly help me in this regard.
thanks
Krish

Hello Krishna,
Thanks for the reply
this message was from the standard SAP i just copy pasted the message.
a STOP icon in the front along with this following message -> "Item 000010 does not exist",
If u can able to give ur mail id i can send the screen shot also. But any clues w.r.to this error.. anything should i need to check in.
kindly advice
thanks
Krish.

OVMM 2.2 "Save as Template" Error messages

Similar Messages

Maybe you are looking for