OWB and AWM for loading DWH

Hello,
I am on the following version:
DB: Oracle 10.2.0.1 (both source DB and target DWH)
OWB : 10.2.0.1
AWM : 10.2.0.1
I have the following process:
From the source DB I use OWB to load relational dimensions (SCD 2). I use AWM to load data from these dimensional tables to a Analytic workspace. I use OWB because I need to track changes (SCD) and use AWM because OWB currently does not support Parent-Child dimensions where as AWM supports. I would love to load AW from OWB directly if it had parent-child support.
My question is:
All the load should be trigger-based, When my process (SQL) completes on the source table the OWB process of loading the relational dimension should start which is not a problem, I using the run_owb_code.sql for this. once the run_owb_code is complete, I want the AWM's maintain data process to start. I don't know how to do it. I tried saving the maintenance task to script and tried executing it, it doesn't seem to work. I don't want to AWM and run cube maintenance every time the cube needs to be refreshed.
Please note I don't have a cube in the relation world. My fact(cube) in the AW is a direct load from a table (as I don't need SCD here) so basically use OWB just to load the dimensions alone. AWM creates the actual cube with the dimension tables loaded using OWB and the fact table from source, So I don't think I can use the "dbms_awm.refresh_awcube(...".
Can somebody please help me in automating this load process
Thanks a lot in advance!
Maruthi

Hello,
I am sorry, after some research, I came across this post
Re: Cube and dimension refresh proactively
As per the above post, the script that is generated using AWM will work if the AW is not attached by any user.
I detached the AW and executed the script and the cube was populated with data.
Thanks,
Maruthi

Similar Messages

Basic datawarehouse implementation concept in context to owb and awm

Hi
I am in the evaluation phase of a project where by i have to comment on tools for warehouse implementation. WHAT WE CAN DO AND CAN NOT DO
ROLAP or MOLAP or should we go hybrid
There will be high volume of records DAILY going to the warehouse scd2, scd2 ,scd3 etc.
So suggested ROLAP implementation at the lowest granularity...transaction detail. OWB as tool
then there will be marts for specific business area ...should be lowest granularity ..so ROLAP implementation. USING OWB as tool
There will be one MOLAP implementation for aggregation and materialized view as cube . ( take advantage of query rewerite for aggregated results) USING AWM
now the question is CAN WE CREATE ONLY MOLAP warehouse using AWM that can serve aggregate as well as low gran transaction details.
we have to have owb for transformations as awm does not provide transformation .
for value based hierarchies and multiple hierarchies per dimension options there is no support in OWB for ROLAP implementation.
this only works for molap ..USING AWM
so how do we go about it ..OR A MIXED SCHEMA POSSIBLE
any suggestions pls
Cheers
Yojj

The local bind/rebind/unbind restriction is still there and it will always be there.
I would look at
(a) RMI/IIOP, where you use COSNaming as a registry, which doesn't have that registriction, and which also has location-independent object identifiers
(b) Jini.

Verbose logging jdk1.6 no longer contains path and file for loading msgs

The javac verbose option underjdk 1.6 logs LOADING Line as follows:
[javac] [loading javax\naming\InitialContext.class(javax\naming:InitialContext.class)]
That is different that what I had been getting under jdk 1.5
[javac] [loading Z:\WebSphere\AppServer\java\jre\lib\core.jar(javax/naming/InitialContext.class)]
Given a choice I would have prefered the orginal.
It resolves to a jar. I find the 1.6 line of no more use than the original, and in fact of much less use.
I see no signs of this being reported as a bug, or even noticed (not a single person other than myself complaining on the internet...)
I can find no flags to revert to original, and see no snippits of postings showing the former format in any samples of Verbose dumps...
Help....???
Why do I care.... I had scripts that using this output to identify our internally written jars being "found" by the compiler, so that they could be "graphed" and packaged in the wars that needed them. Not perfect, but easy.... At least it was easy.

Solved my own issue. Turns out my IP address for the served was changed by the router. I have now assigned it a permanent IP. It's working again.

Loading pl/sql scripts into OWB and running it

Hi,
Does anyone have an example for loading and executing PL/SQL Scripts in OWB?.
Thanks
Mehdi

Hi Mehdi,
Can you be more specific about what you want to achieve?
Do you mean running a package that OWB generated as a mapping?
Or running some external code?
Please check the User Guide, especially chapters 6 (Creating Mappings), 9 (Using Oracle Warehouse Builder Transformations) and 11 (Deploying to Target Schemas and Executing ETL Logic).
Good luck, Patrick

How do I use the NI 9481 to switch a load on for 30s and off for 30s?

I am attempting to turn a load on and monitor voltages using Signal Express and a cDAQ. I have a NI 9481 Relay module but I am having a problem figuring out how to set it up. I need to have the relay close for 30 seconds and open for 30 seconds.

Hi M.Fish and welcome to the NI Discussion Forums!
Try looking at this forum post as it may lead you in the right direction. http://forums.ni.com/ni/board/message?board.id=70&message.id=7113&requireLogin=False
PBear
NI RF

Can I load Microsoft Office Word 2011 for MAC on an IPAD 2? If yes, then how? I have the software and one more load opportunity left.

Can I load Microsoft Office Word 2011 for MAC on an IPAD 2? If yes, then how? I have the software and one more load opportunity left.
Reason that I ask is that I'm worried that I will not be able to read or work word or excel docs that people send me.

No. Office 2011 for Mac is coded to run with OS X. In order to work on the iPad the app must be coded for iOS instead.
If you look in the iTunes App Store, you will find that there are many apps that allow you to work with Office files on an iPad.
Allan

Any possibility for loading and changing XFL/... data at run time of Flash app?

Hi everybody,
I have a quick and general question for the following case:
I want to produce some transitions and effects for a kinetic typography project in After Effects and then import these parts into Flash Professional via XFL and Bridge.
So my actual problem is this one: my Flash application should be able to load these made transitions and effects dynamically at run-time and not from a pre-configured timeline made upfront. Because there should be dynamic text fields in these XFL data from After Effects I also need to be loaded at run-time for the kinetic typography thing.
So is there any possible way to do / load / change the dynamic text fields in these XFL data or the order of all transitions and effects in Flash Professional at run-time or anything else?
I know this is a special question, but I hope there would be an answer...
Thanks for your help in advance
Regards,
Kevin

Something along this model is what I had in mind:
public class MainPanel extends JPanel
    private DrawPanel drawPanel = new DrawPanel();
    private JComboBox comboLeft = new JComboBox();
    private JComboBox comboRight = new JComboBox();
    public MainPanel()
        // add drawpanel and comboboxes to main panel
        // add item listener to comboboxes
    private class ComboListener implements ItemListener
        @Override
        public void itemStateChanged(ItemEvent arg0)
            if (...) // both comboboxes changed
                // get values from comboboxes
                drawPanel.setValues(left, right); // call drawpanel's method
public class DrawPanel extends JPanel
    private int left = 0;
    private int right = 0;
    public DrawPanel()
        //setPreferredSize(....); // set panel size
    @Override
    protected void paintComponent(Graphics g)
        super.paintComponent(g);
        //... draw the line depending on the left and right value
    public void setValues(int left, int right)
        this.left = left;
        this.right = right;
        repaint();
}

For some reason, I can not delete bookmarks. I did one at a time, then tried 5 or 6 and it worked once then no more. I then tried 1 at a time and it worked once the no more. This is a brand new computer (Win7) and FF just loaded about 3 hours ago.

# Question
For some reason, I can not delete bookmarks. I did one at a time, then tried 5 or 6 and it worked once then no more. I then tried 1 at a time and it worked once the no more. Why is this happening? This is a brand new computer (Win7) and FF just loaded about 3 hours ago. Do not know how the bookmarks even got in there. Some were ok, but no order and some that were never bookmarks. Looks like FF tried to import some BM's from the Virtual XP installed, but did not get it any where near right. I need to completely delete all of them and install from a saved .html file.

Well, I did not see the exact problem that I was having listed in the articles, BUT the problem is solved for now.
I opened FF and the Bookmarks to Organize again. I deleted all of the folders and entries, ONE AT A TIME, AND IT WORKED. Evidently, for what ever reason, FF did not like "Batch" deletes of ANY amount greater than 1 and the HANG UP would occur.
Deleting one at a time then importing the good .html from a good file, loaded the wanted Bookmarks. Yea

Load balancing and HA for office web apps server Lync 2013

Hi,
I have 12000 users, 3 FE servers in a pool, 2 edge server in a pool, HA required, IM/presence, A/V, WEb conferencing required. plan to have 2 office web apps server a farm with HA, below are my queries
1. which type of load balancing i need....DNS or HLB for office web app servers? if its HLB then is it mandatory?
2. i have already 2 HLB for FE pool .. one for externa url , one for internal URL...can i use the same HLB for office web app servers ?
3. one more question regarding EDGE pool load balancing, can i use the same HLB in EDge pool also that i am using for FE pool?

Hi,
1. which type of load balancing i need....DNS or HLB for office web app servers? if its HLB then is it mandatory?
WebApps runs on https and you cannot load balance http traffic using DNS load balancing. you need to have a HLB.
2. i have already 2 HLB for FE pool .. one for externa url , one for internal URL...can i use the same HLB for office web app servers ?
you can use the same HLB for that
3. one more question regarding EDGE pool load balancing, can i use the same HLB in EDge pool also that i am using for FE pool?
for that one, you probably need a separate HLB.
Z-Hire -- Automate Lync User Account creation process ( AD / Exchange / Lync )

FireFox hangs up for a long time on most pages and sometimes never loads them. This is new phenomenon. What can I do to resolve this issue?

I attempt to open up a site. Firefox hangs for a 20-30 seconds on most sites and sometimes never opens the page, despite leaving it open for a long, long time. I find that if I go up to the address bar and hit "enter" on the page I'm trying to go to that most of the time I can then load the page after a couple of tries. This is obviously annoying and never used to happen. I'm looking for a fix. Thanks!

I had done that already. I brought it down to 30, which was recommended in another thread.
For most sites, Firefox works fine. But some of the primary sites I use for work hang up for long periods of time and frequently never load. I've tested the same sites with other browsers and they load quickly, so it is a Firefox issue.
Please help me keep Firefox! Thanks!!

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

When trying to download apps on my new iPad I keep getting prompted to update my security questions for my safety. When I choose this option it freezes and won't load the questions, however, when I hit not now it won't let me download. What do I do?

When trying to download apps on my new iPad I keep getting prompted to update my security questions for my safety. When I choose this option it freezes and won't load the questions, however, when I hit not now it won't let me download. What do I do?

Reboot your iPad and then see if you can set the security questions.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

I use BT Yahoo! but when I try and navigate to email from the home page it keeps jumping between 'connected and waiting for login' and never loads up.

My internet service provider is BT in the UK. The home page is www.btinternet.com. After I've logged on, the home page displays fine - I can see the summary of my emails in one of the windows on the home page. The problem comes when I click on the mail application. The page then tries to load the email application. However, it never actually loads, it keeps jumping between connected and waiting for login. It never achieves it so I just have to click the 'back' button to get to the home page. I use chrome and ie but neither has this problem.

I retraced my steps to how i got the Google app:
App Store icon on Home Screen > Search, at bottom > entered Google
The first Google App on the screen appears:
Google logo small g in blue square: Google Search; Open (because it is already installed). Below that is a picture of the iPod with the usual Google Search screen. I have never inserted a link into a discussion group so i hope you can open this.
http://https://itunes.apple.com/us/app/google-search/id284815942?mt=8
Does this bring us any closer?

My screen load times have slowed down to a crawl. I have to wait and wait for a page to load. (I know --dial -up) It used to be much faster a month ago before 5.0. Is it FireFox or do I look to Yahoo for the problem? I don't know how to sort it out.

I use dial-up, FireFox 5.0, Yahoo addition 1.8. My screen load times have slowed down to a crawl. I have to wait and wait for a page to load. (I know --dial -up) It used to be much faster a month ago before 5.0. Is it FireFox or do I look to Yahoo for the problem? I don't know how to sort it out. Using Vista

I'm having the same problem. Dreamweaver is supper slow. Uploading and downloads from the server... any server I use two different servers. It times out all the time. Menus are slow too.
I'm on a MAC Pro, 6 gigs of ram no issues with anything else. I have talked to Apple they have checked everything for me. They say it's Dreamweaver. I've noticed the Dreamweaver is talking to the FTP even when I'm not doing anything.
I've tried cleaning out my MAC caches, turning off file check and check out. Still really slow. I've worked with Dreamweaver for 6 years never any issues like this before. 18 seconds to upload a 4 kb file. 11 seconds to download the same file.

I cannot load Maverick on my iMac HD. It reports that my HD is used for Time Machine backups and will not load to that drive. I do not use this drive for backups. Help.

I cannot load Maverick on my iMac HD. It reports that my HD is used for Time Machine backups and will not load to that drive. I do not use this drive for backups. I use an external 1 TB WD My Book for backups as well as Super Duper Backups. Can anyone offer advice. Thanks.

Welcome to Apple Support Communities
You have got the "Backups.backupdb" folder in the root level of your hard drive. This is the folder used by Time Machine to save backups to, and the OS X Mavericks installer thought that your hard drive is being used to store Time Machine backups
To fix this, open a Finder window, select the Go menu (on the menu bar) > Go to Folder, and type:
Then, delete "Backups.backupdb" and empty the Trash. Finally, open the Mavericks installer from the Applications folder and follow the steps

OWB and AWM for loading DWH

Similar Messages

Maybe you are looking for