P/S module and Process Module

hi,
could someone tell me what the difference is between P/S module and Process Module?
in BTE ( T-code FIBF), i saw the two terms but i have no idea abot team.
thanks in advance

P/S - Publish and Subscribe Interface
You cannot use external software
Process Interfaces
Allows external sotware or external developments that intervene the standard process

Similar Messages

P/S Modules and Process modules

Hi All,
Can anybody tell me the difference between P/S Modules and Process modules? I came across these when I tried to implement a BTE. I could only do FIBF->Settings->P/S module and was successful in that. So please let me know what is the basic difference and also how to go about enhancement using Process modules.
Thanks,
Sowrabha.

P/S - Publish and Subscribe Interface
You cannot use external software
Process Interfaces
Allows external sotware or external developments that intervene the standard process

Process Chain hangs on AND process

Help Super gurus!
I've tried several versions of a chain that loads multiple InfoPackages serially then multiple DTP in parallel using filtering from the PSA to a DSO. All load successfully. Then I have the DTPs all meet at an 'AND' process before processing should continue to a cube.
The 'AND' process also shows green but it does not continue to the next process step. It just stops there, no more jobs running, no yellow, nothing. It thinks it's all done, everything after that is still blue.
Why does it hang there and what can I do to get it to continue?
Thanks,
Al
Points available.

Hi,
Not sure what is the root cause in your case.
Try this. It may work. Normally this is done after a step turns red and no repeat is available.
Method 1 (when it fails in a step/request)
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
How is it possible to restart a process chain at a failed step/request?
Sometimes, it doesn't help to just set a request to green status in order to run the process chain from that step on to the end.
You need to set the failed request/step to green in the database as well as you need to raise the event that will force the process chain to run to the end from the next request/step on.
Therefore you need to open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.
Of course you can also set the state of a specific step in the chain to any other possible value like 'R' = ended with errors, 'F' = finished, 'X' = cancelled ....
Check out the value help on field rspcprocesslog-state in transaction se16 for the possible values.
Thanks,
JituK

Attachment Buttons not coming in Task TS17900101 of HCM Forms and Process

Hi ,
We are using HCM Forms and process for changing employee organization unit which is linked with workflow for approvals.
In this workflow we are calling standard task TS17900101 .Till now every thing is working fine but the problem is with attachments as their is a requirement to show attachments button with this Approve and Reject Task. But as per my knowledge SAP has not given any option to attach documents with this task which is however only possibe through TS17900100.
So can u suggest any way to attach documents with Approve and Reject Task which is TS17900101.
Thanks,
Rahul

Hi,
i have the same problem and no idea how to solve it.
Please let me know, what enhancing module pool code helped you
Thanks,
Galina

AND Process

Hi Every one,
My Process chain is getting failed in the AND Process.Due to this all my dependent Process chains also not running.
How can i make the AND process sttaus to green?Please drop all your valuable suggestions on this.
Below is the error message.Is there any Function module to change the status to green and resume the loads?
*This AND process is not waiting for event RSPROCESS, parameter 4FCRJ6Y13IB4REHCKENODFOK0 E RSP
Thanks in advance,
Chandu.

Hi,
1. Right click on the failed AND process and goto chain tab, there you will find the Instance and variante take those.
2. goto SE16, give table name as RSPCPROCESSLOGpress enter give the variant and instance that you have taked previously-- execute.
3. take the LogID and Process Type from the entry it is displayed.
4. Goto SE37, give the FM name RSPC_PROCESS_FINISH and execute.
5. in the entries give the Log ID, Process Type , Variant and Instance and Status as 'G' and presss execute.
Now the further processes will tirgger when you execute that.
Hope this helps.
Veerendra.

What Message type and Process Code to use for Purchase Order Change in 4.6C

I like to implement in SAP R/3 4.6C a scenario for Purchase Order Change, via inbound IDoc.
I have been searching, but could not find what Message Type, Idoc Basic Type and Process Code to use.
I can not imagine this functionality does not exist in 4.6C.
Any suggestions for my problem are welcome.

Hello,
In this case you should use the message PORDCH and BAPI method BAPI_PO_CHANGE but only exist as of release 4.7.
Function module    BAPI_IDOC_INPUT1
Idoc Type              PORDCH01
Message Type      PORDCH
So check carefully the following OSS notes:
[Notes 589066 - BAPI_PO_CHANGE: Incorrect account assignment to network |https://service.sap.com/sap/support/notes/589066] (not be fooled by the description)
[ Notes 197958 - BAPIs for purchase orders - Missing Functions|https://service.sap.com/sap/support/notes/197958]
Regards,
Andrea
Edited by: Andrea Olivieri on Sep 3, 2009 10:17 AM

P&S and process BTE's

Hi All,
What is the technical difference between the P&S BTE's and process BTE's. I know that the P&S are publish and subcribe BTE's but what does that exactly mean ?
I am facing a problem where one BTE is not getting called for a mass run of a particular process. If I run the single run for the same account the BTE is called. I had also raised this with SAP and they say the same BTE should be called.
I think it could be the difference between the P&S BTE's and process BTE. Currently the BTE is defined under process modules on an SAP application. It might need to be defined somewhere else to be called by both processes.
The same problem also exists for a BADI in another process, called for Single run but not for Mass Run.
Can somebody suggest what can be the possible problem ?
Thanks in advance,
Archana

Hello Ramana,
The difference between the two is like this:
- Publish and Subscribe Interface
Means the Event FM only provides the Document number or anything that is coming in the FM Import interface in order to trigger some other external process. You have no vontrol on changing SAP code from this FM. You can just use that info and do additional tasks outside of that SAP process
- Process Interface
Means that Event FM provides both Import and changing parameters which allows you to take control of the process and influence what the changing parameters values are going to be used once the control returns back from this FM back to its caller.
Hope this helps.
Thanks.

Transaction code to find Process message and Process Instruction

Hi
I am new to PP module
Where do i find (In which Transaction) the list of
a) Process Message Category
b) Process message
c) Process Instruction Category
in SAP ERP system??
Regards
Sweety

Hi
Thank u all for responding
Still I was not able to find certain Process Messages like YQ_AIR, YQ_RPM, YQ_TEMP, YQ_CONS, YQ_PHCO, YQ_PHCO2.
and Process Instructions like
YQ_AIR, YQ_ENDPI,YQ_HEAD, YQ_INSTR, YQ_LAY, YQ_MATLI, YQ_PROD, YQ_PTEXT,YQ_RPM, YQ_TEMP, YQ_CON1, YQ_CON2..
do I need to do some (Basis) configuration to get these?? or the above mentioned Process Messages and Process Instructions are not pre defined??
Regards
Sweety

How to Integrate Oracle Imaging and Process Management(IPM) 7.7.10 with EBS

Hi All,
We are implementing the following modules from Oracle Content Management to one of our Client, the following are the versions of the tools:
Configure and deploy Oracle Forms Recognition (OFR) 10GR3
Configure the Oracle Adopter for integration of OFR with EBS Version 11.5.10.2
Configure the Adopter for integration of OFR with Oracle Imaging and Process Management (IPM) 7.7.10
I really like to have any technical design document on integrations front, especially from OFR -> EBS and also IPM -> EBS.
Please feel reach me on my following contact details:
[email protected]
Phone: 1865-582-2369
Mobile: 1865-202-6430
Any pointers for the same is well appreciated.
Regards
Chandra

Try replacing the .dll file with the one in your WINDOWS directory. I had that problem and I copied the .dll from C:/WINDOWS/system32 to overwrite the one located in the install directory.

How to develp a subreport in the same page of the main report and processed when is called

SSRS 2012
Hi guys,
I am developing a report that includes a subreport.
therefore The report is made up by 2 sections:
1) Show a grid (several rows - may be 100 or more - and some columns). It represent high level info (Each row represent a specific item)
2) The user click on a Row/column (eg: Item1, to see details that must be shown as graph.
Here the problem: Searching info about SSRS reporting for subreports, drilldown, nested report and so on, no ones accomplish the requirements for the following reasons:
1) Subreports: NOT open in the same page. The user must <go back> to see detail for other items, such as Item 2....
2) Nested and DrillDown: Process data as the Main report (they are hidden and displayed after user action). In my case this leads to performance problem, because: if the main report has 200 objects (it means 200 graphs processed and hidden at the same time
for the main reports).
3) DrillThrough and Subreport: The detail data are processed only when the user select the interested item in the main report. Here the problem: the report is shown externally.
Please, it there any possibility to have a subreport (or anything else) to be executed in the same report as the main report and processed only when the user make action?
Thanks for your help.

Hi Fasttrack2,
According to your description, there is a main report with more than 100 rows of summary information, when users click the item of the row, the report need to jump to detail information shows as graph. The problem you are facing is that you are not sure
subreport, drilldown or drillthrough report should be used? You hope to set display detail information in the main report and keep high performance of report.
In Reporting Services, each subreport instance is a separate query execution and a separate report processing task. Subreports are recommended when there are just a few subreport instances. We should not use subreports inside a group when there are many
group instances, instead, consider using drillthrough reports. Drilldown reports process all data even when the data is first hidden. In order to improve the performance of the report, we can split drilldown reports into parameterized drillthrough reports,
because Drillthrough reports do not run until a user clicks the drillthrough link in the main report.
In this case, we can consider using drilldown or drillthrough report. In drilldown report, when we click a plus or minus button to expand or collapse a section of a report, the detail data will be displayed in place. By using drillthrough report, when we
click the link in the main report, the detail data will be displayed, we can come back to the main report by click return button in the drillthrough report.
Reference:
Troubleshooting Reports: Report Performance
Drillthrough, Drilldown, Subreports, and Nested Data Regions
If you have any more questions, please feel free to ask.
Best Regards,
Wendy Fu
If you have any feedback on our support, please click
here.

Difference between connection, session and process

Hi all,
Can anyone please update me on the difference between connection,session and process.
Thanks in advance,
- Sri

I got this useful note by googled in net. It describes session,connection,process gracefully.
A connection is a physical circuit between you and the database.A connection
might be one of many types -- most popular begin DEDICATED server and SHARED
server. Zero, one or more sessions may be established over a given connection
to the database as show above with sqlplus. A process will be used by a session
to execute statements. Sometimes there is a one to one relationship between
CONNECTION->SESSION->PROCESS (eg: a normal dedicated server connection).
Sometimes there is a one to many from connection to sessions (eg: like
autotrace, one connection, two sessions, one process). A process does not have
to be dedicated to a specific connection or session however, for example when
using shared server (MTS), your SESSION will grab a process from a pool of
processes in order to execute a statement. When the call is over, that process
is released back to the pool of processes.

Can i use labview to capture and process images from ip cameras connected to a switch.

Hi,
i have more then one ip cameras conneted in LAN by a switch. i have a PC conneted to same switch. is it possible to capture images from these ip cameras and process them(for example performing simple barcode scan or QR-code scan or OCR)? Which IP cameras will be supported?

There is functionally no difference whether the camera is connected directly to the system or via a switch. Both should work the same. The only real requirement that you'd need to care about is whether the switch can pass multicast UDP traffic correctly (this is used for network discovery of IP cameras). Generally all unmanaged switches (probably what you are using) will treat multicast traffic identical to broadcast traffic, but some managed switches/routers may need to be configured to pass multicast.
Eric

Why do I have to Open and physically Save a provided .xlsx File in order to source it and process it in SSIS?

It sounds CRAZY...but it's true and I proved it out over many tests...
We receive a .xlsx File from an outside vendor. If we simply move the file over to our processing Path and then try to source it and process it in SSIS, we get this error...
Exception from HRESULT: 0xC02020E8
Error at Data Flow Task [Excel Source [1]]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB Error has occurred.
Error code: 0x80004005
However, if we open the file and Save It and/or Save As to our processing library path, we can source the .xlsx File and process it accordingly.
Why is this? Is it because something funky is happening under the covers when the the vendor creates and saves the .xlsx File and then when we open and save it on our network it then cleans it up?
Is there anyway that we can get around this? I hate for the processing clerk to have to go through what seems like a meaningless task....but I cannot think of any way around this if we cannot source the original file. And a C# Edit Script using Microsoft.Interpol.Excel
is not possible because we are not allowed to put Microsoft Office on the Server where the SSIS Package will eventually reside.
Any thoughts...suggestions...etc...would be GREATLY appreciated.
Thanks for your review and am very hopeful (Holding my breath) for a reply and possible solution and answer to this strangeness.
ITBobbyP85

First of all...THANK YOU ARTHUR!
You're probably sick and tired of seeing my posts out here on this.
We are running Microsoft Office 32-bit which is why I downloaded the 32-bit driver of Microsoft Access Database Engine 2010 from...
http://www.microsoft.com/en-us/download/details.aspx?id=13255
Sooooo I think what you're saying is that it is a Microsoft Office 2010 .xlsx File but utilizing the 32-bit Microsoft Access Database Engine 2010 only allows me to source as Microsoft Excel 2007.
Nowwww....this will run on a Server...soooo a couple of questions...
1.) Are you saying I need to use the 64-bit Microsoft Access Database Engine 2010 in order to process this file without having to open and Save it? Can I do that if we're running Microsoft Office 32-bit? Will I be able to source this on the Server because
we cannot install Microsoft Office 2010 on the Server where this SSIS Package will live and breathe.
2.) How can I tell which Microsoft Access Database 2010 Engine is on the server where this will eventually reside and run? 32-bit or 64-bit?
Welllll...maybe a 3rd question...
3.) Is there anyway to get around this driver dependency? Can I create a script to bulkcopy it and it would simply take what's on the server.
Now mind you...we DO NOT have Microsoft Office installed on our server where this will reside...a licensing issue...
So maybe now this explains my struggles with this damn file(excuse my French and frustration)...and why I was using a C# Edit Script to Open and Save the File until I then deployed it to the server and the Microsoft.Office.Interop.Excel DLL was not available
on the Server because we cannot install Microsoft Office on the Server.
Sooooo it seems as though I'm back at square one.
UGH!
Any additional help you can suggest or even if we can continue this "offline" would be GREATLY GREATLY appreciated.
Thanks!

'AND' process in a process chain failure - need help

For the first time and out of no where, two separate 'AND' processes in two separate process chains failed on two separate days. It displayed error the same messages in both isntances as below. It seems that when the first load completed and the second was still in progress, this 'AND' attempted excecute and failed.
I had to manually resume the chain by setting the 'AND' status'to 'G' in RSPCPROCESSLOG table. I also plan to recreate those 'AND'.
But did anyone here experience this problem and know the root cause?
Thanks for any assistance!
Julian
This AND process is not waiting for event RSPROCESS, parameter
Job cancelled after system exception ERROR_MESSAGE

Thanks, Shambhu!
I am planning to create new ones. But my problem is that I hate to recreate all 'AND's I have in all our chains. There are a lot of them. But if I don't, I have no idea which is the next victim ...
Julian

How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.

How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.

If the data is on a remote server (for example, PHP running on a web server, talking to a MySQL server) then you do this in an AIR application the same way you would do it with any Flex application (or ajax application, if you're building your AIR app in HTML/JS).
That's a broad answer, but in fact there are lots of ways to communicate between Flex and PHP. The most common and best in most cases is to use AMFPHP (http://amfphp.org/) or the new ZEND AMF support in the Zend Framework.
This page is a good starting point for learning about Flex and PHP communication:
http://www.adobe.com/devnet/flex/flex_php.html
Also, in Flash Builder 4 they've added a lot of remote-data-connection functionality, including a lot that's designed for PHP. Take a look at the Flash Builder 4 public beta for more on that: http://labs.adobe.com/technologies/flashbuilder4/

P/S module and Process Module

Similar Messages

Maybe you are looking for