P6N gets stuck at post screen

Whenever I boot my PC it gets stuck at the post screen and says press delete to enter bios. However, when I press delete it does nothing at all. When I hold the insert key during bootup it takes me to the screen below in the second picture and then gets stuck.
-p6N Platinum
-1.7 BIOS
-Core 2 Duo E6600
-mushkin 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400)
-XFX PVT84JUDD3 GeForce 8600GT
-Rosewill Turbo series RT550-135-SL 550W ATX 12V ver.2.2

Quote from: Alex.Ethuba on 13-August-09, 15:43:25
Try clear the cmos with the jumpers
P6N platinum doesnt have jumpers to clear cmos, so dont bother looking.
You can try by taking battery out for a few min and then restart,like mentioned.
Also, did it just work before or is it a new build?

Similar Messages

I have snow leopard installed as an OS. When trying to reboot a MacBook Pro I am getting stuck on grey screen with apple logo and rotating symbol. What can I do?

I have snow leopard installed as an OS. When trying to reboot a MacBook Pro I am getting stuck on grey screen with apple logo and rotating symbol. What can I do?

Maybe this might help.
http://support.apple.com/kb/TS2570

Images get stuck in full screen mode

In Lightroom, images get stuck in full screen mode, i.e. won't go back to develop or grid mode. Please help!!

In Lightroom, images get stuck in full screen mode, i.e. won't go back to develop or grid mode. Please help!!

Lightroom 5.4 is getting stuck in full screen mode. I need to force-quit the app in order to re-start and use again. How can I fix this?

Lightroom 5.4 is getting stuck in full screen mode. I need to force-quit the app in order to re-start and use again. How can I fix this?
I am using Mac osX 10.9.2
I can see that I am not the only one with this problem.

LOL... this is what I just had to look up... it's not exactly clear or apparent, is it?
When in Full screen mode.. just press Command-F. Voila!

Photoshop touch gets stuck on load screen on samsung grand, neo, core and most of the samsung phones

photoshop touch gets stuck on load screen on samsung grand, neo, core and most of the samsung phones

Hi,
which version are you using of the app?
Does it help to set the phone in flight mode?
Thanks,
Ignacio

Direct linking from Premiere gets stuck at post processing

Hi Guys,
I have a huge project from Premiere. It's a feature about 1hr 32mins that i tried to direct link to speed grade. Speed grade loads up and it gets stuck at post processing. I read that people recommend exporting as an EDL but you only have 1 track of video? and I have like 9 tracks. What do you guys recommend doing?
heres the setup I have.
Macbook Pro Retina 15".
256gb SSD
16gb Ram
Adobe CC
Project sits on 2 thunderbolt drives.

i turned off the intel gpu and only ran on the 1gb card. still nothing. left it alone for 5 hours while it was in "post processing" and didn't load. im getting nervous, even if I got it to work and it crashes on me; I cant afford to wait on it.
I went ahead and exported my project to quicktime and currently working in Resolve 10 Lite. The scene detection was a lot faster than speedgrades. Im not here to knock on adobe/speed grade. hopefully you guys can fix this soon?
thanks
P-

My I phone 4s wont start correctly. I turned on audio reader and it just gets stuck on lovk screen and i cant enter my phone

I starrteaudio reader and mi phone wont start it just gets stuck on lock screen and is slow

Hey tessatony,
Thanks for the question. I understand that your iPhone 4s is not functioning properly, and that you wish to try to make a backup before troubleshooting. From the information you have provided, it sounds like the device is indeed turning on and responding when plugged in, however the display is not lighting up. Have you attempted to plug the iPhone into a computer with iTunes? If iTunes recognizes the phone, you can attempt to back it up:
iTunes: About iOS backups
http://support.apple.com/kb/ht4946
Afterwards, attempt to restart and/or reset the phone:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If your issue persists, your iPhone may need to be serviced. The following link should help you get started with the process. Included, you will find information on topics such as warranty, service pricing, and express replacement service.
Apple - Support - Service Answer Center
http://www.apple.com/support/iphone/service/faq/
Thanks,
Matt M.

HP CP4025 getting stuck on loading screen

I have an HP CP4025 Color Laserjet printer and when i try starting it up it will get stuck on the screen with the following info on it:
6/6 (On the Left Side)
HP Animated Icon
A/F (On the Right Side)
The 3 lights right below it blink in order from left to right.
I suspect it is a firmware issue but i have no way of loading new firmware from the website since the computer it is USB connected to cannot recognize it as being connected. I have tried googling this problem but cannot find anything even close to what might be causing this issue or how to resolve it. Thank you for your time and any help would be very appreciated.

Did you ever figure this out? I'm having this issue also!

After update to ios 7 my 4s gets stuck in lock screen

Every now and then my iphone 4s gets stuck in lock screen, I can't slide to unlock. The only way to solve the problem is to switch off and then on the iphone and then it works again.
Any clues?

Hi zzcool,
Welcome to the Support Communities!
To address this issue, I would suggest restarting and/or resetting the iPhone:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If that does not resolve the issue, refer to page 146 in the iPhone User Guide to Reset All Settings:
iPhone User Guide for iOS 7
manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
Cheers,
- Judy

ITunes getting stuck on iPod screen

Basically, whenever I connect my iPod to my computer, iTunes opens but then gets stuck on this screen:
I can click off to Music or Films or a playlist or something, but I can't for the life of me get my iPod to do anything.
Does anyone have any form of solution to this? I don't want to reinstall iTunes because that tends to cause a whole heap of problems. I'm running Windows 7, 64 bit and my iPod is a white 4G with iOS 5.1.1
Thanks!

Hi,
You could see if this helps...
DFU Mode / Unable to Update or Restore
http://support.apple.com/kb/HT1808
DFU Mode
Open iTunes and Connect the iPod to your Mac
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time
After 10 Seconds release the Sleep/Wake Button until iTunes tells you it has Detected an iPod in Recovery Mode...
The Phone Screen will remain Black... Now Restore.
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

My iphone 5 get stuck in locked screen when two or more missed calls or messages shown on locked screen list

My iphone 5 get stuck in locked screen when two or more missed calls or messages shown on locked screen list

Hi bhagath1339,
Welcome to the Apple Support Communities!
The first troubleshooting steps I would recommend in this situation would be restarting and if the issue continues, resetting the iPhone.
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
If the issue continues after restarting and resetting, it may be necessary to restore your iPhone to isolate software versus hardware. Please follow the attached article if you need assistance restoring the device.
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Have a great day,
Joe

Getting stuck in POST instead of restarting

Hi guys.
I would appreciate some help here...
Whenever I apply (or at least try to) a setting in my BIOS menu, there is chance my mobo cannot handle it, which is fair and square.
BUT: Instead of rebooting and then rebooting again to say that my OC has failed or aomething like that to declare failure to apply settings, it just gets stuck before it posts! So here I am with a blank computer screen but with a pc which is apparently working... Of course no windows booting or HDD movement at all.. What can I do to fix this? I am tired of reseting the CMOS using the backplate button. Even though the SAVE SETTINGS menu is incredibly time earning in those cases, I dare say I am fed up with ClearingCMOS for a small mistake!!
What should I do?
Oh, I thought it was good to apply the lowest - close to auto - setting for some of the voltages in the cell menu. I guessed it would help not overdo it with pumping the voltages up for no reason. I have not OCed now, but until then I would like to check if this minimum 1.10 (a notch above the Auto setting) is OK.
Thank you in advance.

iraklisvel, I will post a screenshot from the mainboard's user manual, page 3-23:
[Click image to enlarge it]
As you can see, there are two procedures in case the system does not boot because of a failed overclock and I can promise you that you will save a lot of time if you clear CMOS instead of waiting for the the system to reboot a fourth time.
My suggestion is to save the last stable and your experimental settings in independent profiles under "USER SETTINGS" in BIOS. These profiles are not erased when your clear CMOS and provide and easy and fast way to load a set of custom settings.
To answer your other questions:
Quote
1. Undervolting. When I apply 1.10Vcore instea of 1.11, the mobo hangs. It just does not POST. We all know that such a minor decrease in vCore would hurt anyone so bad right?
I had no problems undervolting my E6600 as long as the clock speeds matched the voltage values.
Quote
2. Memory settings that are supposed to work 100% sure. Do you find it reasonable not being able to POST in ddr2 - 800 4-4-412 with 1066 modules? Because they actually do it on other mobos.
I had no problems to make a set of G.Skill F2-6400PHU2-2GBHZ run stably @4-4-4-12/2.1V on the P45 Platinum (@DDR2-800 of course). Never tested with the Kingston HyperX KHX8500D2K2/2G memory I got though.
Quote
3. Multiplier Setting. Not all of them worked in the BIOS that came with the mobo. I guess this was a mistake which was not mine, right? It got (not fully) fixed when I updated the BIOS.
Overclocking my E6600 to 400 MHz FSB x9 was no problem with a small voltage bump from 1.250V to 1.330V (EIST & C1E enabled). 450 MHz FSB Clock speed x 9 was a problem, however it worked with the x8 multiplier. @500 MHz FSB the x8 multiplier became a problem but I could stabilize the system using x7. Maybe 500 MHz x 8 is possible with a couple of voltage adjustions. But testing these things takes time and I did not have that time yet.
The bottom line is: The stability of a multiplier depends on a bunch of other settings as well. I don't know under what conditions you have tested the different multipliers. To be able to comment on more precise conditions, more details are needed to get a picture of what you actually tried to accomplish with certain settings.

Mac book air crashed, when restarted it gets stuck on grey screen

I was using my MacBook Air (mountain lion osx) this afternoon as normal when the screen froze on me as if the computer had crashed. After a minute or two I decided to restart it by holding down the power button. The air turned off and back on, and got the the grey screen with the apple symbol as if it was re-booting but has been stuck there ever since?.
Any idea what's happened and how to resolve please.
Thanks in advance.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery is separate from the main battery of a portable. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. If you can't get to an Apple Store, go to another authorized service provider.

Blackberry gets stuck on reboot screen

Hello, was in the middle of updating my blackberry and it came up with a message saying it had failed, so I unplugged my phone and from then onwards it gets stuck on the reboot screen and I cannot use my phone. All that happens is that the white bar at the bottom (the one that shows how much longer the reboot is going to be) , when it gets to the end instead of starting up my phone it just stays like it and nothing happens for a while. Then a white screen comes up and says " app error 200 "
anyone know what to do now?

Hey Charlierogers,
Welcome to the BlackBerry Support Community Forums.
Please try completing a clean reload of the device software as shown here:
How to perform a clean reload of the BlackBerry Device Software for Windows
http://btsc.webapps.blackberry.com/btsc/KB11320
I hope this helps.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

HELP PLEASE! Blackberry curve 8520 - keep getting stuck on "white screen"

Hi i only have this blackberry curve 8520 for like 3 days and already its getting stuck on the "white screen" i experienced this problem with my previous blackberry and after several battery removals it broke and wouldnt turn on again and NOW this new blackberry with the same white screen problem! please HELP ME ANYONE PLEASEEEEEEEEE!!!
thanks

Do you have a media card installed? If so, remove the battery while the phone is powered on, remove the media card (leave it out), then reinsert the battery and let the phone fully reboot. See if that makes a difference or not.
"Cats may taste like chicken, but they have more bones than rabbits."
Blackberry 101
Tips & Tricks
Videos to learn from on youtube

P6N gets stuck at post screen

Similar Messages

Maybe you are looking for