PA30, PA40 Showing dump error

Hi Experts,
When i run the tcode PA30 and PA40 getting short dump attached here with.
Kindly suggest how to overcome from this issue.
Our current SAP_HR support pack level is SAPKE60429
Thanks,
Narasimhan Krishna

Similar Messages

PCUI showing dump errors after EEWB enhancement

Hi Experts,
I'm using CRM5.0.
After adding some fields by EEWB(Easy Enhancement Workbench) the PCUI application showing several dump errors in several places. How to correct this problem, should I regenerate all the layout by CRMC_BLUEPRINT or any other way is there to correct these errors. Please suggest a solution for that.This is very urgent.
Thanks In Advance
Rana

Hi Fred,
1>
Whenever I'm clicking F4 help button beside service prospect,contact person etc the following dump is coming as in opportunity transaction (CRMD_BUS2000111) likewise other transactions also.
Note
     The following error text was processed in the system CS1 : CRM_BSP_LIBRARY:structureEdit: Act. table parameter gt_layout is empty
     The error occurred on the application server nmpcsssb1_CS1_01 and in the work process 0 .
     The termination type was: ERROR_MESSAGE_STATE
     The ABAP call stack was:
Method: IF_BSP_ELEMENT~DO_AT_BEGINNING of program CL_CRM_BSP_STRUCTUREEDIT======CP
What can I do?
     If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system CS1 in transaction ST22.
     If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server nmpcsssb1_CS1_01 in transaction SM21.
     If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server nmpcsssb1_CS1_01 . In some situations, you may also need to analyze the trace files of other work processes.
     If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 500 -u: ABAP1 -l: E -s: CS1 -i: nmpcsssb1_CS1_01 -w: 0 -d: 20070521 -t: 115438 -v: ERROR_MESSAGE_STATE -e: CRM_BSP_LIBRARY:structureEdit: Act. table parameter gt_layout is empty
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
second error:
2>
Whenever any business partner is selected in partner id of partner tab ,partner fn(sold-to-party) then it is showing the following dump error.
SAP Note
     The following error text was processed in the system:
An exception with the type CX_SY_DYN_CALL_PARAM_NOT_FOUND occurred, but was neither handled locally, nor declared in a RAISING clause
Exception Class     CX_SY_DYN_CALL_PARAM_NOT_FOUND
Error Name
Program     CL_CRM_BSP_INTLAY_PARTNER=====CP
Include     CL_CRM_BSP_INTLAY_PARTNER=====CM002
ABAP Class     CL_CRM_BSP_INTLAY_PARTNER
Method     PUT_DATA
Line     1269
Long text     Call of the function CRM_PARTNER_GET_COM_BY_STRUCT failed: The formal parameter ET_RETURN_VALUES does not exist.
EEWB used to add a field Account No in Service order transaction.
which is now reflecting to all the transaction as a customer field.
Thanks
Koustav

Regarding dump error in smartforms

hi experts,
               my one driver program along with smartforms is working fine in the development server after transportation to production server it is showing dump error :::
the error is:
Function module " " not found.
What happened?
The function module " " was called, but cannot be
    found in the Function Library.
Error in ABAP application program.
The current ABAP program "ZSD_DELIVERY_ORDER_DRIVER_PREP" had to be terminated
     because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
    and make a note of the actions and input that caused the
    error.
To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer
     termination messages, especially those beyond their normal deletion
    date.
is especially useful if you want to keep a particular message.
Error analysis
An exception occurred. This exception will be dealt with in more detail
    below. The exception, assigned to the class 'CX_SY_DYN_CALL_ILLEGAL_FUNC', was
     not caught, which
led to a runtime error. The reason for this exception is:
    The program "ZSD_DELIVERY_ORDER_DRIVER_PREP" contains a CALL FUNCTION
     statement. The name
of the function module to be called is " ".
No function module exists with the name " ".
    All function modules are stored in the Function Library (SE37).
Possible reasons:
a) Wrong name specified. Particular attention should be paid
       to upper/lower case and underscores ("_")
    b) Transport error
c) If an enqueue/dequeue module has been used, the lock object
       may not have been activated (ABAP Dictionary)
       may not have been activated (ABAP Dictionary).
i have checked in the production server but i m not finding <b>" "</b> this thing in the program ..plz help me to solve this.

Hi Ravi,
Can you show me the code where you have called the smart form in driver program.Becaus the FM generated in Development server may differ from the FM generated in Production server.Make sure u r passing the FM which is generated from the function module SSF_FUNCTION_MODULE_NAME.

Regarding dump error in MMBE

hi experts good morning,
                  when i execute tc mmbe it is showing dump error sometimes back it worked fine and now it is showing dump error ,,i m giving the error below plz have a look and help me.....
ShrtText
    Syntax error in program "SAPLMBBS ".
What happened?
    Error in ABAP application program.
    The current ABAP program "RMMMBESTN" had to be terminated because one of the
    statements could not be executed.
    This is probably due to an error in the ABAP program.
    In program "SAPLMBBS ", the following syntax error occurred
    in the Include "LMBBSU07 " in line 75:
    "The column name "WAERS" has two meanings. ABAP/4 Open SQL statement."
    Author and last person to change the Include are:
    Author "SAP "
    Last changed by "SAP "
Error analysis
    In program "SAPLMBBS ", the following syntax error occurred:
    "The column name "WAERS" has two meanings. ABAP/4 Open SQL statement."
Trigger Location of Runtime Error
    Program                                 RMMMBESTN
    Module type                             (FORM)
    Module Name                             EKPO_LESEN

Hi,
Please find the SAP notes. There are several notes for this.
Regards,

While saving the delivery no in VA02 dump error showing (Arithmatic overflo

Hi,
while saving the delivery no in VA02, one dump error getting displayed.
Arithmatic over flow occurs.
Can any one can say how to rectify the program to avoid dump error
The below lines are showing in dump.
Waiting for quick response.
Error analysis
               An exception occurred that is explained in detail below.
               The exception, which is assigned to class 'CX_SY_ARITHMETIC_OVERFLOW', was not
                caught in
               procedure "USEREXIT_SAVE_DOCUMENT_PREPARE" "(FORM)", nor was it propagated by a
                RAISING clause.
               Since the caller of the procedure could not have anticipated that the
               exception would occur, the current program is terminated.
               The reason for the exception is:
               An overflow was discovered in an ongoing arithmetical operation with
               operands of type P. Possible causes are:
               1. The result field of type P is too small for the result.
               2. The result or a intermediate result has more than 31 decimal places.
     How to correct the error
               The result field must be enlarged, if this is still possible. It may
               also be possible to break up the current process into subprocesses so
               that only smaller values occur.
               There may already be a solution to the error in the SAP notes system.
               If you have access to the SAP notes system first try searching with the
               following keywords:
                "COMPUTE_BCD_OVERFLOW"
                "BCD_FIELD_OVERFLOW" (Until release 4.0a, this runtime error occurred at this
                position)
                "SAPMV50A" or "ZSDI_MV50AFZ1_CRPC_CALC_4QA"
                "USEREXIT_SAVE_DOCUMENT_PREPARE"               ***----
     Information on where terminated
               Termination occurred in the ABAP program "SAPMV50A" - in
                "USEREXIT_SAVE_DOCUMENT_PREPARE".
               The main program was "SAPMV50A ".
               In the source code you have the termination point in line 666
               of the (Include) program "ZSDI_MV50AFZ1_CRPC_CALC_4QA".
               The termination is caused because exception "CX_SY_ARITHMETIC_OVERFLOW"
                occurred in
               procedure "USEREXIT_SAVE_DOCUMENT_PREPARE" "(FORM)", but it was neither handled
                locally nor declared
               in the RAISING clause of its signature.
               The procedure is in program "SAPMV50A "; its source code begins in line
               208 of the (Include program "MV50AFZ1 ".
657                           ADD: xvbap-brgew TO l_w_tot_list_vals-brgew,
     658                                xvbap-zzlogpoint TO l_w_tot_list_vals-zlogpoint,
     659                               xvbap-zztotgrossvalue TO
     660                               l_w_tot_list_vals-totgrossvalue.
     661
     662
     663                           l_w_tot_list_vals-gewei = xvbap-gewei.
     664
     665                           IF NOT xvbap-pstyv IN zzt_free.
     >>>>>                             ADD xvbap-volum TO l_w_tot_list_vals-volum.
     667                           ELSE.
     668                             ADD xvbap-volum TO l_w_tot_list_vals-volum_f.
     669                           ENDIF.
     670                           ADD 1 TO l_w_tot_list_vals-zw_nbitem.
Best Regards,
BDP
Edited by: Bansidhar Padhy on Jan 26, 2010 8:24 AM

ADD xvbap-volum TO l_w_tot_list_vals-volum.
Declare l_w_tot_list_vals-volum as "like vbap-volum" or (preferably) "type volum_ap".
If you're using a packed decimal, you've done something like.... volum(5) type p decimals 2, which is a great way to get an overflow...if you use packed decimals in a program...declare <field> type p decimals <n> without a length attribute, so that SAP can use the full 8 bytes for the calculation.....the put it into a alpha field for display, if needed....

Error in creating Table Maintenance for TABLES: J_2IRG1BAL ,Dump error show

Dear Gurus
I have Created one Table Maintenance for TABLES: J_2IRG1BAL ,
1) I have take function group as same as table name like J_2IRG1BAL
3) Authorization Group &NC&
4) Authorization object S_TABU_DIS
5) Function group J_2IRG1BAL
6) Package J1I5
7) Maintenance type one step.
8) Maint. Screen No.    Overview screen 2009.
9) Recording routine STD recording routines .
I have assign screen single screen 1 but it will not take the screen so ill put screen 2009 ,the system will not not accept the screen but I proposed to Save and activate the table maintenance generator and created and save the function group ,the table is ready to save the entries
We have to go to SM30 then put 4-5 entries ,after that a dump error shows
Which i have attachéd in this mail kindly help me out
Its effect in production server.
I have found that the error is given below I have mentioned all the details
Kindly read this
I have created function group J_2IRG1BAL and assign Package J1I5 and function group,J1I5 is already a Function group so problem occurs a dump error message displays
Kindly give me the right solution all the Clients are effected
110,100 150,250 these all are effected development clients
300 is prod client this is also affected because I have created a table maintenance generator and send the req to production .
*Dump Error Shows in Production*
Runtime Errors         SYNTAX_ERROR
Date and Time          11.12.2008 09:26:30
What happened?
|    Error in ABAP application program.
Error analysis
In program "SAPLJ1I5 ", the following syntax error occurred:
"The program "SAPLJ1I5" is not Unicode-compatible, according to its pro"
"gram attributes."
The current ABAP program "SAPLSVIM" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "SAPLJ1I5 ", the following syntax error occurred
in the Include "SAPLJ1I5 " in line 0:
"The program "SAPLJ1I5" is not Unicode-compatible, according to its pro"
"gram attributes."
rigger Location of Runtime Error                                                                 |
Program                                 SAPLSVIM
Include                                 LSVIMU01
Row                                     107
Module type                             (FUNCTION)
|    Module Name                             VIEW_MAINTENANCE
Author and last person to change the Include are:
Author "TTLABAP2 "
Last changed by "TTLABAP2 "
105
Initialisierung des Abgleichsmandanten zum View                     *
106
>>>>>
vim_default_upgr_clnt-viewname = x_header-viewname.
108
vim_default_upgr_clnt-client   = client_for_upgrade.
109
PERFORM vim_set_global_field_value IN PROGRAM (fpool)
| 110|            USING 'VIM_DEFAULT_UPGR_CLNT' 'C' vim_default_upgr_clnt rc.

I have send you all the details regarding the table maintenance generator
error is shown below
                                       I have Created one Table Maintenance for TABLES: J_2IRG1BAL ,
1) I have take function group as same as table name like J_2IRG1BAL
3) Authorization Group &NC&
4) Authorization object S_TABU_DIS
5) Function group J_2IRG1BAL
6) Package J1I5
7) Maintenance type one step.
8) Maint. Screen No.    Overview screen 2009.
9) Recording routine STD recording routines .
I have assign screen single screen 1 but it will not take the screen so ill put screen 2009 ,the system will not not accept the screen but I proposed to Save and activate the table maintenance generator and created and save the function group ,the table is ready to save the entries
We have to go to SM30 then put 4-5 entries ,after that a dump error shows
Which i have attachéd in this mail kindly help me out
Its effect in production server.
I have found that the error is given below I have mentioned all the details
Kindly read this
I have created function group J_2IRG1BAL and assign Package J1I5 and function group,J1I5 is already a Function group so problem occurs a dump error message displays
Kindly give me the right solution all the Clients are effected
110,100 150,250 these all are effected development clients
300 is prod client this is also affected because I have created a table maintenance generator and send the req to production .
                                                                                Runtime Errors         SYNTAX_ERROR
Date and Time          11.12.2008 09:26:30
ShrtText
Syntax error in program "SAPLJ1I5 ".
What happened?
Error in ABAP application program.
The current ABAP program "SAPLSVIM" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "SAPLJ1I5 ", the following syntax error occurred
in the Include "SAPLJ1I5 " in line 0:
"The program "SAPLJ1I5" is not Unicode-compatible, according to its pro"
"gram attributes."
Author and last person to change the Include are:
Author "TTLABAP2 "
Last changed by "TTLABAP2 "
Error analysis
In program "SAPLJ1I5 ", the following syntax error occurred:
"The program "SAPLJ1I5" is not Unicode-compatible, according to its pro"
"gram attributes."
Trigger Location of Runtime Error
Program                                 SAPLSVIM
Include                                 LSVIMU01
Row                                     107
Module type                             (FUNCTION)
Module Name                             VIEW_MAINTENANCE
Source Code Extract
Line
SourceCde
77
TRANSPORTING NO FIELDS.
78
IF sy-subrc NE 0.
79
SELECT SINGLE * FROM tfdir WHERE funcname EQ <function_name>.
80
IF sy-subrc NE 0.
81
RAISE no_editor_function.
82
ELSE.
83
length = strlen( function_name1 ).
84
ASSIGN function_name1(length) TO <function_name>.
85
SELECT SINGLE * FROM tfdir WHERE funcname EQ <function_name>.
86
IF sy-subrc NE 0.
87
RAISE no_database_function.
88
ENDIF.
89
ENDIF.
90
INSERT x_header-viewname INTO alr_checked_views INDEX sy-tabix.
91
ELSE.
92
length = strlen( function_name1 ).
93
ASSIGN function_name1(length) TO <function_name>.
94
ENDIF.
95
96
Initialisierung der RFC-Destination zum View                        *
97
98
FPOOL+4 = X_HEADER-AREA.
99
fpool   = x_header-fpoolname.
100
vim_default_rfc_dest-viewname = x_header-viewname.
101
vim_default_rfc_dest-rfcdest = rfc_destination_for_upgrade.
102
PERFORM vim_set_global_field_value IN PROGRAM (fpool)
103
USING 'VIM_DEFAULT_RFC_DEST' 'C' vim_default_rfc_dest rc.
104
105
Initialisierung des Abgleichsmandanten zum View                     *
106
>>>>>
vim_default_upgr_clnt-viewname = x_header-viewname.
108
vim_default_upgr_clnt-client   = client_for_upgrade.
109
PERFORM vim_set_global_field_value IN PROGRAM (fpool)
110
USING 'VIM_DEFAULT_UPGR_CLNT' 'C' vim_default_upgr_clnt rc.
111
112
set flag if complex selection conditions in sellist                  *
113
114
IF complex_selconds_used NE space.
115
READ TABLE dba_sellist INDEX 1.
116
IF sy-subrc EQ 0 AND dba_sellist-cond_kind EQ space.
117
dba_sellist-cond_kind = 'C'. MODIFY dba_sellist INDEX 1.
118
ENDIF.
119
ENDIF.
120
121
direkter Vergleich: Flagge setzen usw.                              *
122
123
IF view_action EQ vim_direct_upgrade.
124
view_action = aendern.
125
PERFORM vim_set_global_field_value IN PROGRAM (fpool)
126
USING 'VIM_SPECIAL_MODE' 'C' vim_direct_upgrade rc.

When i executed program , it go to dump, show this error

Hi Gurs
when i executed program , it go to dump, show this error .
Short text
     The ABAP program lines are wider than the internal table.
Error in the ABAP Application Program
The current ABAP program "SAPLSKBH" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
it show this lines.
    read report l_prog_tab_local into l_abap_source.
366 *      catch cx_sy_read_src_line_too_long into ex_too_long.
367 *    endtry.
368     check sy-subrc eq 0.
Edited by: Rob Burbank on Feb 17, 2010 2:54 PM

d022s length is only 72 char
so u have to copy D022S Structure to ZD022S Structure and
and define like LINE CHAR(data type) 1500(length)
then u define internal table like
data: begin of itab occurs 0.
        include structure Zd022s.
data: end of itab.

Authorisation error with PA30/PA40 transaction

Hi Experts,
In our system, the transactions PA30/PA40 are giving some authorisation error
(No read/maintain authorisation for Personal Data) for all operations
create/change/display of data. (even though in su01 transaction,
we have given all authorisations SAP_ALL under profiles and also removed all roles)
Also checked the possibility of any custom BADI getting called, but none exists.
Any solutions / suggestions are appreciated.
Thanks in Advance,
Mirza.

Hi!
Right after you have the authority error, enter the following transaction code /NSU53.
SU53 trasnaction will collect the missing autority objects.
Regards
Tamá

Dump error while creating a new page in smartforms URGENT pls!!!

while creating a new page it is showing me a dump error , that the superior program execption was not intercepted , i have even given the next page field also correctly, i have attached a mainwindow to that page and a text element to that . .
thanks
sridhar

Hi Deena,
This error:
"[2012-07-10T14:50:30.005+05:30] [wls_ods1] [ERROR] [] [oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JXkC9dU3FClqwsJb6G1FyhO000003D,0] [APP: odsm#11.1.1.2.0] Server Exception during PPR, #7[[
javax.servlet.ServletException: Could not initialize class com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub"
is known issue
Go to metalink, article: Unable To Connect To OVD 11g Webinterface Using ODSM. [ID 1282757.1]
You need to apply that patch.
I hope this helps,
Thiago Leoncio.

Short dump error report

What is the purpose of short dump error report generated by the system? What r the major parts/section of this report?

hi please look through this:
Whenever any transaction or any process is executed it hits an ABAP code.
If there is any issue in executing the code the situation is called "ABAP DUMP" or 'Short Dump'
Transaction ST22 is used to check any ABAP Dump within a given duration.
U can also fix the issue with the help of ABAP editor (Transaction Code SE38) if u r good with ABAP.
you can select back to the last 14 days if you are
running the SAP_REORG_ABAPDUMPS job (program RSSNAPDL) which deletes te
old ABAP dumps every day, possibly further if you run it weekly or
monthly.
sap-basis sap-basisAll Groups Ignore this text box. It is used to detect spammers.If you enter anything into this text box, no search results will be displayed.
SAP Groups > Technical-functional > sap-basis > Message
About This Group | Invite peers to join this group
<< Prev thread < Prev msg Next msg > Next thread >>
short dump----urgent
Reply from Keith Lewis on 5/2/2003 3:22:00 AM
Good explanation Joy, but it is not only limited to the current day and
yesterday. If you click on the Selection button you can select previous
days as well. In fact you can select back to the last 14 days if you are
running the SAP_REORG_ABAPDUMPS job (program RSSNAPDL) which deletes te
old ABAP dumps every day, possibly further if you run it weekly or
monthly.
Cheers
Keith
SAP R/3 Support Specialist
Information Services International
Tel +44 1664 41 6178 Mobile +44 7887 627818
E-mail email@removed
Archive Page - http://www.ittoolbox.com//I/sap-r3-basis.asp
Dear sreenivas
If you receive an error message in the R/3 System log (SM21), or if you
see
a terminated update in the update service analysis transaction (SM13), or
DB
realated error ,check for dumps using the dump analysis transaction
(transaction ST22), or choose Tools -> Administration -> Monitoring ->
Dump
analysis.
Transaction ST22 enables you to analyze short dumps from the current and
previous day.
The dump analysis function shows you:
What happened
What you can do
How to correct the error
The dump analysis function also provides an error ID and keywords that you
can use to search in SAPNet, as well as information about:
The system environment
Users and transactions
Transaction ST22 enables you to analyze the following data:
Date, time, user, client
Contents of system and data fields
Contents of internal tables and application tables
ST22 is a very nice feature in SAP. This is where all the system errors
and users mistakes showed up. If there is a problem that you cannot
solve and you contact SAP support, they look at this area to analyze it.
This gives us lead where to handle the problems.
Error analysis
How to correct the error
System environment
User, transaction...
Information on where termination occurred
Contents of system fields
Chosen variables
Active calls / events
Internal notes
Active calls in SAP kernel
List of ABAP programs affected
List of internal tables
Directory of application tables (contents)
Directory of data areas (administration information)
Directory of data areas (contents)
ABAP control blocks CONT
End of runtime analysis
i think this would be helpful
regards
sravani

Short dump error when using count(*)

Hi Experts
I am getting a short dump error when selecting the records >= current date - 30 see the coding and comment please correct the coding I want to know the ztable records it is important for command interface.
I have 1402345 records available after deleting the records but as the memory is not enough it is giving short dump error
select count(*) from ZINT_TABLE
select count(*) from ZINT_MSGS
   select * from zint_data
             nto table izint_d2 . "PACKAGE SIZE 20000
   where STATUS = 'OK' AND CREATED_ON >= w_date1.          " VALUE
endselect.**
report z_eslp_command_records.
data: cnt type i.
data: cnt2 type i.
data: cnt3 type i.
data: cnt4 type i.
DATA:
     w_date1 like sy-datum .
DATA:
     w_date2 like sy-datum.
data: izint_msgs type table of zint_msgs.
data: izint_data type table of zint_data.
data: izint_m2 type table of zint_msgs.
data: izint_d2 type table of zint_data.
INITIALIZATION.
w_date1 = sy-datum - 30.
w_date2 = sy-datum - 30.
select * from zint_data
             into table izint_data PACKAGE SIZE 3000
             where STATUS = 'OK' AND CREATED_ON <= w_date1.   " ZERO
endselect.
select * from zint_msgs
             into table izint_msgs PACKAGE SIZE 3000
              where CREATED_ON <= w_date2.              " ZERO
endselect.
select * from zint_data
             into table izint_d2 PACKAGE SIZE 20000
   where STATUS = 'OK' AND CREATED_ON >= w_date1.          " VALUE
endselect.
select * from zint_msgs
             into table izint_m2 PACKAGE SIZE 20000
where CREATED_ON >= w_date2.                            " VALUE
endselect.
select * from zint_data
            into table izint_data2
where STATUS = 'OK' AND CREATED_ON >= CONVERT(CHAR(8), GETDATE() - 30, 112)).
ENDSELECT.
select * from zint_msgs
            into table izint_msgs2
where CREATED_ON >= CONVERT(CHAR(8), GETDATE() - 30, 112)).
ENDSELECT.
sort izint_data by created_on ascending.
sort izint_msgs by created_on ascending.
sort izint_d2 by created_on ascending.
sort izint_m2 by created_on ascending.
describe table izint_data lines cnt.
describe table izint_msgs lines cnt2.
describe table izint_d2 lines cnt3.
describe table izint_m2 lines cnt4.
write:/ ' Note: THE RECORDS COUNTED SHOULD SHOW ZERO ELSE THE SCRIPT FAILED TO RUN' color 3.
skip.
write:/ '1. Records counted in ZINT_DATA   <=current date - 30                   :' color 2,                        cnt color 4.
write:/ '2. Records available in ZINT_DATA >=current date - 30                   'color 4,                   cnt3 color 4 .
skip.
write:/ '2. Records counted in ZINT_MSGS   <=current date - 30                   :' color 2                 ,                      cnt2 color 4.
write:/ '4. Records available in ZINT_MSGS >=current date - 30                   'color 4 ,            cnt4 color 4 .
TOP-OF-PAGE.
WRITE:/55(60) ' WAGNERS INVESTMENT LIMITED '.
WRITE:/50(40) ' Command Interface Data' CENTERED .
WRITE:/50(40) '----
' CENTERED .
FORMAT INTENSIFIED ON.
SKIP.
"FORMAT COLOR COL_HEADING.
ULINE.
FORMAT COLOR 1.
END-OF-PAGE.

Answer

Dump error while filling the Setup table

Hi All,
I am trying to fill the setup table.While filling the stup table for 2lis_03_BF datasource, i got the Dump error after some time. I have checked the data in Setup table and found 9000 records.
Shall i proceed further by pulling the data from R/3 to BW.I have checked the data in RSA3 and got some data.
Shall i schedule the data from BW side.
Pls help on this issue.
Thanks,
Siva.

Thanks Reddy and JS.
I have checked the TCODE SM37 and found no jobs are available. I have checked the TCODE : NPRT and found some logs.In this, it is not showing any errors.
I have checked in SM21 and found some errors.
Time_______________Text
17:08:10____________Transaction Canceled M2 630 ( )
17:23:47____________Run-time error "TIME_OUT" occurred
17:23:47____________> Short dump "090302 172347 sand1_W2 2_00 " generated
17:30:08____________Status: 80% of IL00.DAT is in use
17:30:17____________Status: 90% of IL00.DAT is in use
17:30:18____________Overflow of Paging File (032768 Blocks)
17:30:18____________Run-time error "MEMORY_NO_MORE_PAGING" occurred
17:30:19____________> Short dump "090302 173018 sand1_W2 2_00 " generated
Shall i execute filling the setup table again. Do i need to give termination time More ( 2 Hrs difference)
Any issue on refilling the setup table again.
Pls suggest.
Thanks,
Siva.

Dump error while running termination action

I'm facing a dump error while running termination action, please, if some one wud help me out of this error. here when im termination action the system is opening action infotype when given the date of termination and try to save, system shows a warning message that "Record valid from 08.08.1995 to 31.12.9999 delimited at end" then I press enter and system is asking me to save. when I do so, rather than it taking me to another screen its throwing a dump error.
Runtime Errors         SYNTAX_ERROR
Date and Time          21.10.2008 18:54:05
Short dump has not been completely stored (too big)
Short text
     Syntax error in program "SAPLCACS_BU_PARTNER ".
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLBUD_CHECK" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
     The following syntax error occurred in program "SAPLCACS_BU_PARTNER " in
      include "LCACS_BU_PARTNERU44 " in
     line 19:
     "The key of internal table "LT_BUT0BK" contains components of type "X" "
     "or "XSTRING". The "READ TABLE LT_BUT0BK" statement is not permitted fo"
     "r such tables in a Unicode context."
     The include has been created and last changed by:
     Created by: "SAP "
     Last changed by: "SAP "
     Error in the ABAP Application Program
     The current ABAP program "SAPLBUD_CHECK" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
     The following syntax error was found in the program SAPLCACS_BU_PARTNER :
     "The key of internal table "LT_BUT0BK" contains components of type "X" "
     "or "XSTRING". The "READ TABLE LT_BUT0BK" statement is not permitted for
"r such tables in a Unicode context."
ger Location of Runtime Error
Program                                 SAPLBUD_CHECK
Include                                 LBUD_CHECKF01
Row                                     1.129
Module type                             (FORM)
Module Name                             RLDEL_CHECK
ce Code Extract
SourceCde
9
0 *------ ... Funktionsbausteine ermitteln -
1   CALL FUNCTION 'BDT_TBZ1F_GET'
2     EXPORTING
3       iv_objcn = gc_objcn_bupa
4       iv_objap = gc_objap_bupa
5     TABLES
6       et_tbz1f = lt_tbz1f
7     EXCEPTIONS
8       not_found = 1
9       OTHERS    = 2.
0   READ TABLE lt_tbz1f INDEX 1.
1   IF sy-subrc = 0.
2     CALL FUNCTION 'BUP_PARTNER_GET'
3       EXPORTING
4         i_partner    = is_but100-partner
5         i_cp_exclude = gc_x
i_is_exclude = gc_x
PORTING
e_but000_int = ls_but000_int
CEPTIONS
OTHERS       = 1.
... Funktionsbausteine aufrufen -
T lt_tbz1f WHERE     ztpkt = 'RLDEL'
             AND NOT fname IS INITIAL.
Datümer alt = neu = SPACE => Löschung, sonst Update -
(Einschränkung der Gültigkeit)
FUNCTION lt_tbz1f-fname
PORTING
i_partner        = is_but100-partner
i_partnerguid    = ls_but000_int-partner_guid
i_role           = is_but100-rltyp
i_dfval          = is_but100-dfval
i_calltp         = iv_calltp
i_valid_from     = is_but100-valid_from_dats
i_valid_from_old = iv_valid_from_old
i_valid_to       = is_but100-valid_to_dats
i_valid_to_old   = iv_valid_to_old
PORTING
e_result         = lv_result.
... Ergebnis merken, wenn höher als bisheriges Zwischenergebnis-
v_result > gv_wu_result.                          "#EC PORTABLE
wuresult = lv_result.
F.
... Ergebnis ist 'Nicht löschen': Zeitpunkt abbrechen -

HI Mallik,
for termination action the operation that i've set is
lis9 0001
cop 0002
lis9 0007
cop 0008
lis9 0014
lis9 0015
lis9 0587
so just want to know if the set format for termination action is right
and other option is that if there is some change to settings of infotype charateristics in table v_t582A this may cause change in the date that is cause of error.
can u please suggest the above alignment of operations and infotype is right and provide me the idle settings for infotype characteristics which may solve my query.
thanks mallik.

At the time of RFQ creation dump error

Dear All,
                    At the time of RFQ creation one Dump error is coiming... please advise to solve this issue...
the error message is :
Runtime errors         SYNTAX_ERROR
       Occurred on     09.09.2009 at   12:10:27
Syntax error in program "SAPLV61A ".
What happened?
The following syntax error occurred in the program SAPLV61A :
"Incorrect logical expression: Instead of "X" a field, a function or "("
Error in ABAP application program.
The current ABAP program "SAPLMEVA" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "SAPLV61A ".
You can also perform the syntax check from the ABAP/4 Editor.
If the problem persists, proceed as follows:
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
The following syntax error was found in the program SAPLV61A :
"Incorrect logical expression: Instead of "X" a field, a function or "("
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
   print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.
System environment
SAP Release.............. "620"
Application server....... "ARCHIVAL"
Network address.......... "172.26.2.145"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "4x Intel 80686"
Character length......... 8 Bits
Pointer length........... 32 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "ARCHIVAL"
Database type............ "MSSQL"
Database name............ "EDP"
Database owner........... "dbo"
Terminal................. "cheeid92corit"
Character set............ "English_United State"
SAP kernel............... "640"
Created on............... "Mar 9 2009 22:54:07"
Created in............... "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version......... "SQL_Server_9.00 "
Patch level.............. "274"
Patch text............... " "
Supported environment....
Database................. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2,
Windows NT 6.0"
User, transaction...
Client.............. 777
User................ "MMCORE"
Language key........ "E"
Transaction......... "ME47 "
Program............. "SAPLMEVA"
Screen.............. "SAPMM06E 0311"
Screen line......... 54
Information on where terminated
The termination occurred in the ABAP program "SAPLMEVA" in
"ME_LOAD_VARIANTS_PRICING".
The main program was "SAPMM06E ".
The termination occurred in line 55 of the source code of the (Include)
program "LMEVAU08"
of the source code of program "LMEVAU08" (when calling the editor 550).
Source code extract
000250       ENDIF.
000260   *--> Initialisieren
000270   *--> not necessary anymore (Raimond Buchholz)
000280   *   CALL FUNCTION 'CUD0_CONFIGURATION_INITIALIZER'.
000290   *--> Preisteile der Varianten besorgen
000300       CALL FUNCTION 'CEI0_GET_CONDITIONS'
000310            EXPORTING
000320                 INSTANCE    = I_CUOBJ
000330                 APPLICATION = 'MM'
000340            TABLES
000350   *              CONDITIONS = T_VCKEY.                 "del 194053
000360                 CONDITIONS = T_VCKEY                   "ins 194053
000370            exceptions                                   "ins 194053
000380                 error_message = 01                     "ins 194053
000390                 others         = 02.                    "ins 194053
000400   *--> Preisteile der Varianten mit Belegnummer versorgen
000410       LOOP AT T_VCKEY.
000420         T_VCKEY-KAPPL = 'M '.
000430         T_VCKEY-VBELN = I_EBELN.
000440         T_VCKEY-POSNR = I_EBELP.
000450         MODIFY T_VCKEY.
000460       ENDLOOP.
000470     ENDIF.
000480
000490   *--> Preisteile der Varianten an Preisfindung übergeben
000500   *- pricing_load_variant_key muß auch bei Positionen ohne Konfiguration
000510   *- laufen, da die Logik im PRICING zu 4.0 umgestellt wurde
000520     IF I_NO_LOAD IS INITIAL.
000530       DATA: I_POSNR LIKE VBAP-POSNR.
000540       I_POSNR = I_EBELP.
      CALL FUNCTION 'PRICING_LOAD_VARIANT_KEYS'
000560            EXPORTING
000570                 APPLICATION = 'M '
000580                 VBELN       = I_EBELN
000590                 POSNR       = I_POSNR
000600            TABLES
000610                 TVCKEY      = T_VCKEY
000620            EXCEPTIONS
000630                 OTHERS      = 1.
000640     ENDIF.
000650
000660   ENDFUNCTION.
Contents of system fields
SY field contents..................... SY field contents.....................
SY-SUBRC 0                             SY-INDEX 0
SY-TABIX 1                             SY-DBCNT 1
SY-FDPOS 1                             SY-LSIND 0
SY-PAGNO 0                             SY-LINNO 1
SY-COLNO 1                             SY-PFKEY GVP
SY-UCOMM
SY-TITLE Maintain Quotation : Item 00001
SY-MSGTY E                             SY-MSGID AIPLOC
SY-MSGNO 002                           SY-MSGV1 303632
SY-MSGV2                               SY-MSGV3
SY-MSGV4
Kind regards
P.Anandhakumar

Hi Anandhakumar,
Debugg the transaction with help of ABAPER.
System will show you the reason for the above error.
Hope this should solve your problem.
Thanks and regards
Gitesh

I purchased bioshock 2 on the app store on my macbook pro (running lion) and it shows 'an error has occured' every time I try to download the app. How do I install it properly, I have restarted my mac and reset the app on the debug menu?

I purchased bioshock 2 on the app store on my macbook pro (running lion) and it shows 'an error has occured' every time I try to download the app. How do I install it properly, I have restarted my mac and reset the app on the debug menu?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

PA30, PA40 Showing dump error

Similar Messages

Maybe you are looking for