Package body greater than 2160 bytes does not compile in Object Browser

Hi there,
I initially created a package in Apex 2.1.0.0.39 using the Object Browser and it compiled OK. The message in the box above the source code says "PL/SQL code successfully compiled (17:51:08)". I then added more code and eventually when I clicked the "Compile" button" the message to say successfull compilation or any error message was not displayed. The box above the source code remains blank. After much trial and error I found that by adding just one more letter to the end of a comment that it would not compile, but by removing the letter then it would compile most of the time. I downloaded the package and found that the size of the download .PLB file was 2160 bytes. Editing the PLB file using a text editor to increase the size and executing it in SQL*PLUS does work.
Is this a fundamental limit on the size of packages that can be compiled using the Object Browser, or is there an Apex configuration parameter that can be modified to allow larger packages? If this is a limit then why isn't an informational message displayed? Or is this in fact an installation issue or an issues with Apex Object Browser?
Further information:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
I installed this version back at the beginning of the year for training purposes and have not made any conifiguration changes that I am aware of, or installed any further upgrades/software since.
All help gratefully received by this "definitely a nubie".
Regards.
John.

John,
If you are using, as you said, Application Express version 2.1.0.0.39, be aware that this is a very old (and not a supported) version. If you have trouble with the latest version (currently 3.2), feel free to report them here.
Scott

Similar Messages

Package body does not compile in Object Browser

Hi there,
I am trying to compile a package body using the Apex Object Browser. However, when I click the "Compile" button no message is displayed in the box above the package body code. I reduced the amount of code by removing comments and extra carriage returns and it then compiled ie the message "PL/SQL code successfully compiled (18:35:55) " was displayed. After trial and error I found that by adding just one character to the end of a comment line would cause this problem and by removing it the problem would dis-appear.
I raised this issue back on 19th June, and sspadafo responded by suggesting that I upgrade from Apex 2.1 to Apex 3.2. (Thanks by the way). This I have now done but the problem is still occurring. Is there some parameter that I have to increase in order to compile packages greater than a couple of kilobytes in size?
Database is 10.2 XE running on Windows Vista Home Premium.
Thanks.
John.

What would you say is a large package that sometimes causes the compilation to fail? For example, in excess of 10000 lines of code.
I've just tried a package with the minimal amount of code, with as many comments as required to demonstrate the problem as follows:
Note: The last comment is on line number 108!
create or replace package body "TEST_PACKAGE" is
--Comments comments comments comments comments
--Comments comments comments comments comments
--Comments comments comments comments comments
--Comments comments comments comments comments
--Comments comm...
... comments comments comments
--Comments comments comments comments comments
--Comments comments comments comments commen
procedure TEST_PROC
as
begin
null; /* insert procedure code */
end TEST_PROC;
end "TEST_PACKAGE";
{end code}
You will notice that the last comment line is truncated. The above compiles everytime, but by adding one more character to the last comment line will cause it not to compile everytime. Downloading the above to disk gives a size of 5134 bytes, which is twice the size of the other package, which has a little more code, that I was trying to compile. When I say a "a little more code", I mean two procedures and one function of approximately 20 lines each!
Oh well! Looks like I'll have to give SQLDeveloper a try as I don't fancy going through the "edit file/action file" loop in SQL*Plus or the "submit script/wait for results/examine results" loop in SQL Scripts.
(For info, I am using Internet Explorer 7)
Thanks.

I have a manual that contains headings and index entries that contain less than and greater than characters, and . The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the C

I have a manual that contains headings and index entries that contain less than and greater than characters, < and >. The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the Contents or the Index of the generated HTML. In the Contents the words are completely missing and in the index entries the '\' characters that are required in the markers remain in the entry but the leading less than symbol and the first character of the word is deleted; hence what should appear as <dataseries> appears as \ataseries\>. I believe this is a FMv12 bug. Has anyone else experienced this? Is the FM team aware and working on a fix. Any suggestions for a workaround?

The Index issue is more complicated since in order to get the < and > into the index requires the entry itself to be escaped. So, in order to index '<x2settings>' you have to key '\<x2settings\>'. Looking at the generated index entry in the .js file we see '<key name=\"\\2settings\\>\">. This is a bit of a mess and produces an index entry of '\2settings\>'. This ought to be '<key name=\"&lt;x2settings&gt;\" >'. I have tested this fix and it works - but the worst of it is that the first character of the index entry has been stripped out. Consequently I cannot fix this with a few global changes - and I have a lot of index entries of this type. I'm looking forward to a response to this since I cannot publish this document in its current state.

I use different languages in my daily activities, when typing other than English Mac does not recognize them, is there anyway can Mac stop suggesting or automatically correcting me?

I use different languages in my daily activities, when typing other than English Mac does not recognize them, is there anyway can Mac stop suggesting or automatically correcting me?

Is this a problem with the computer or with the word processor? MS Word for example seems to think its grammar and spelling are better than mine - they are not. You have to go into MS Word preferences and uncheck all the useless "help" it wants to provide.

Why is elements better at photomerge than CC- CC does not appear to automatically fill image based on content but elements does when merging a panorama. Also the stitching is visable in CC but almost perfect in elements- why?

I took 6 panorama shots of a scene and used CC to Photomerge them as one. Couldn't see where to automatic blend the edges and there was 'stitch' lines when the images were merged. So i did the same in Elements 11 and it was perfect. Am i doing something wrong in CC or perhaps not doing something at all?
Any help, please?
Dave

Hi - Thanks for taking the time to reply and i appreciate the remarks- if a little harsh- we all have to start somewhere and i am fully aware of the limitations of Elements which is why i decided to add CC to my software. I can only say that if an inferior quality software from Adobe does the job well then CC must also be suited to doing the same which is why i can only think, from your comments, that i have not done something simple- however- following tutorials to get to the end result should have sufficed- it didn't so perhaps i will consider posting the difference between the two applications- and, perhaps suffer a few more 'harsh' comments. The learning curve is quite steep and i am a visual learner, but i'm also not totally incompetent:)
Kind Regards
Dave Munn
Original message----
From : [email protected]
Date : 02/02/2015 - 06:45 (GMTST)
To : [email protected]
Subject : why is elements better at photomerge than CC- CC does not appear to automatically fill image based on content but elements does when merging a panorama. Also the stitching is visable in CC but almost perfect in elements- why?
why is elements better at photomerge than CC- CC does not appear to automatically fill image based on content but elements does when merging a panorama. Also the stitching is visable in CC but almost perfect in elements- why?
created by station_two in Photoshop General Discussion - View the full discussion
First a clarification: you are not addressing Adobe here in these user forums. You are requesting help from volunteers users just like you who give their time free of charge. No one has any obligation to answer your questions.
I'll give it my best shot anyway.
Few folks in this forum are really familiar with Elements, for which there's a dedicated, totally separate forum.
Different engineering teams, also.
From this perspective, it will be difficult to give you a direct answer to your "why?" question.
Personally, I blend very large panorama shots in Photoshop proper since I can't even remember when without any issues whatsoever, up to and including in Photoshop CS6 13.0.6.
Without being at your computer and without looking at your images, I couldn't even begin to speculate what you are doing wrong in Photoshop, which I suspect you are. The least you could show is post examples from your panoramas that have gone wrong.
I can tell you that panorama stitching requires significant overlap between the individual shots, besides common-sdense techniques like a very solid tripod and precision heads.
The only version of Elements I have ever used for any significant time was Elements 6 for Windows, which I bought in 2008 to use on a PC (I've been an avid Mac user for 30 years). I found Elements so limited and so bad that I successfully demanded a refund from Adobe. IU mention this only to emphasize that I can truly only address your question from a Photoshop (proper) and Mac user point of view. I couldn't care less about Elements, but if you have comparison examples of panoramas processed in both applications, by all means post those two.
Generally speaking Photoshop is a professional level application that makes no apologies for its very long and steep learning curve, while Photoshop has many hand-holding features for amateurs and beginners.
Perhaps the bottom line is that you should stick with Elements if you personally manage to get better results there.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7152397#7152397 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7152397#7152397
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Package com.adobe.flashaccess.sdk.policy does not exist

[ Problem ]
We are trying to create policy. We have set the class path and referring adobe-flashaccess-sdk.jar, adobe-flashaccess-certs.jar and also we have copied jsafe.jar into class path directory.
I am getting error. package com.adobe.flashaccess.sdk.policy does not exist error.
Is any other .jar file needs to be included.
[ Solution ]
Page 11 of the Protecting Content document lists all of the .jar files required to use the Flash Access SDK:
adobe-flashaccess-certs.jar
adobe-flashaccess-sdk.jar
bcmail-jdk15-141.jar
bcprov-jdk15-141.jar
commons-discovery-0.4.jar
commons-logging-1.1.1.jar
jaxb-api.jar
jaxb-impl.jar
jaxb-libs.jar
relaxngDatatype.jar
rm-pdrl.jar
xsdlib.jar
jsafe.jar or jsafeWithNative.jar
Please check to make sure you have all the above .jar files on your classpath. You also may want to check out the sample code and Ant built script located in the samples directory of the Reference Implementation Command Line Tools. The Ant script contains targets for both compiling and running the samples, including creating a policy.

No, I don't think you want to just copy the 4 jar files to your /lib/ext Java SDK directory. What you want to do is to run the Java3D install program to install Java 3D to the Java SDK or JRE you specify. The install will also copy some .DLL files since part of Java3D is implemented using native methods. Without the DLLs, I would guess that you can compile programs okay but will run into errors trying to run them. No clue why the install wouldn't work on XP, but maybe the install needs a JRE to run and you need to install Sun's JRE or SDK using their install program - Microsoft used to include their own Java SDK implementation in Windows, but then took it out for Windows XP to try and deprecate Java. The install EXE might be expecting a Windows registry setting that points to a JRE or SDK for it to use.

RuntimeError in mapping.......package com.itc.xi.mapping.udf does not exist

while testing a maaping, one of the UDFs threw the following runtime error...
Error: package com.xxx.xi.mapping.udf does not exist...
moreover, whats the CLASSPATH of the java package com.itc.xi.mapping.*
Message was edited by:
sudeep dhar

Hi,
You seem to be referring to some extrenal class in your UDF and this class is not available under imported archives.
Please check what is the class being refefferd and make sure it is in the imported archives,.
Regards
Bhavesh

HTTP 414 Status code for POST messages greater than 4096 bytes.

Hello,
I am using Sun One 6.0 sp2 and Weblogic 6.1 sp3 for my application. All the requests
are being sent to the Weblogic server using the NSAPI plug-in.
For all POST messages with size greater than 4096 bytes, I am getting a HTTP Status
Code 414.
I have set the MaxPOSTSize to 10240 both on the Weblogic server side, but it still
gives same error.
Can someone please guide me as to how to enable processing of POST messages greater
than 4096 bytes ?
Thank You.
Sanjay.

Hi, I am trying to PUT to update contact info and I get following error:
2015-01-16 11:00:17,970 INFO [main] oracle.eloqua.connector.eloqua.EloquaConnector.putWithBasicAuth(97) | accessHttpsPut.url=https://secure.eloqua.com/API/REST/2.0//data/contact/7606838, text={"id":"7606838","accountName":"openIdStr001","emailAddress":"[email protected]","type":"Contact"}
2015-01-16 11:00:18,931 ERROR [main] oracle.eloqua.connector.eloqua.EloquaConnector.putWithBasicAuth(140) | ClientProtocolException
org.apache.http.client.HttpResponseException: Request is malformed.
Is there any idea?
Thanks so much.
Sincerely.

Java Importer: import of java.lang.Boolean does not compile?

I have created a webservicestub for the Reports webservice with JDeveloper.
Now I want to use it in Forms. All methods work correctly, except the runJob method, which uses a boolean argument. I think I need to import java.lang.Boolean for it, but the created package body does not compile ("wrong number or type of arguments" in jni calls).
Does anybody have suggestions how to get it compiling, or how to call the runJob method without the import of java.lang.Boolean?

Downloading 1.4 sdk does not have the javac, it just has the JRENo, you apparently downloaded the JRE runtime. Do this to get the compiler, etc:
Go here: http://java.sun.com/j2se/1.4/download.html
and in the section titled:
Download J2SETM v 1.4.0_01 JRE SDK
look in this row:
Windows (all languages, including English)
and click download in the column headed SDK at the far right

The ANE library is compiled to MacOS, but does not compile on Windows.

ANE lbrary FPHockeyApp http://flashpress.ru/blog/contents/ane/hockeyapp/FPHockeyApp-6.1.ane
Application:
package
    import flash.display.Sprite;
    import ru.flashpress.hockeyapp.FPHockeyApp;
    import ru.flashpress.hockeyapp.ns.haIOS;
    public class TestHockeyApp extends Sprite
        public function TestHockeyApp()
            super();
            use namespace haIOS;
            var APP_ID:String = 'you app id';
            FPHockeyApp.manager.configureWithIdentifier(APP_ID);
            FPHockeyApp.manager.startManager();
            FPHockeyApp.manager.authenticator.authenticateInstallation();
Compiled in MacOS, but does not compile on Windows:
Why so?

Windows 64-bit.
On a single MacBookPro installed OSX and Windows(not virtual).

Hello I am on a macbook pro (retina IOS 9) i have installed xcodes and command line tools but codeblocks does not compile, terminal gives this message /Users/MacPc/Desktop/Untitled1: Permission denied      any one has a solution

Hello I am on a macbook pro (retina IOS 9) i have installed xcodes and command line tools but codeblocks does not compile, terminal gives this message /Users/MacPc/Desktop/Untitled1: Permission denied      any one has a solution?? please...

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
          Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
           ▹ Restart
from the menu bar.

Discovery does not remove deleted objects

Well,
another issue with discoveries.
We are running discoveries via datafile:
The discovery DataSource script reads the datafile and creates the objects.
That's very nice and works perfectly.
Added entries in the datafile are discovered on the next discovery cycle.
Unfortunately if you delete some entries from the datafile the discovery does not delete the objects in SCOM.
Discovery's datasource writes a logfile and the deleted entries from the datafile are really no longer discovered
( I'm happy that reading files is a reliable function...).
So for this cycle discovery data contains some objects less than before.
But this new discovery does not lead to a deletion of no longer existing objects.
As a workaround we put these superflues objects in maintenance mode.
Would be gratefull if somebody has a good solution
regards
sebastian

Please run "Remove-SCOMDisabledClassInstance” from the Operations Manager PowerShell
console.
You might get some errors after running this. Errors are about the ObjectIDs and RuleIDs, but you can ignore those errors and should keep running this command until it completes successfully.
After completing successfully, the deleted objects will be removed the discovery and SCOM.
Hope this helps.
Thanks, S K Agrawal

Javascript does not work in web browser

Hello friends.
I have a problem with javascript in my Captivate project.
This script only works in preview in Captivate, but does not work in web browser (IE 9, Mozilla, Chrome).
Anybody knows why?
Thank you for your answers.

Common JS interface
That is the official documentation for JS in Captivate 8. For more information, have a look at Jim Leichliter's website: CaptivateDev.com - eLearning Development with Adobe Captivate

A "for" expression that does not compile

This is a for loop from a snippet of code that does not compile in my J2SE 1.4.2 environment:
for (int i: Units.parseRange(range_, 1, pagecnt)) {
Can someone tell me what it means and what the 1.4.2 equivalent is?

Does this mean there is no way that I can compile it in 1.4.2?
I mean, is there an option that enables it?Yes and No... That is, yes using the 5.0 ( 1.5.0 ) beta 2, you can compile to 5.0 ( 1.5.0 ) to 1.4 using the -source and -target switches using 1.4 features only...
but if you use 5.0 ( 1.5.0 ) features, it will not compile to 1.4 , it will give you an error stating that the feature is not supported by 1.4...
So your code snippet would need to be re-written to 1.4 code to work with 1.4.x JVMs ...
Here is an example of the For-Each aka Enhanced For loop written in 5.0 ( 1.5.0 ) beta2 :
public class ForEachArray {
        public static void main ( String [] args ){
                    int[] ar = {1,2,3,4,5,6,7,8,9,0};
                    for (int i:ar){ // For-Each loop
                         System.out.println(i);
}Which the equivalent in 1.4 would be :
public class ForLoopArray {
        public static void main ( String [] args ){
                    int[] ar = {1,2,3,4,5,6,7,8,9,0};
                    for (int i = 0; i < ar.length; i++ ){ // for loop
                         System.out.println(ar);
Hope this answers some of your question, now if you want help with that code snippet, naturally I will need to see some more code related to the snippet so that I can assist you in re-writing it to 1.4 version...
- MaxxDmg...
- ' He who never sleeps... '

My source does not compile in 1.5 because of generics in libraries

Hi,
I have a problem with my source codes written for 1.3 and 1.4 java. I have been implementing Iterator, Collection, List and extending ArrayList in many ocassions. All works as expected in 1.4 but if I try to compile it with 1.5 it does not compile. I do receive many errors which generally speaking are showing that compiler does think that X subclass is not the same as a subclass of X<?> generic which simply makes all my code to not compile.
Does anybody had similar problems with their code? Does anybody knows how to rewrite problematic code so that it will compile under BOTH 1.4 and 1.5 without -source 1.4 option?
Some examples, stripped to problematic parts:
public class CSectionList extends ArrayList
public final boolean add(Object element)
             int p = Collections.binarySearch(this,element);
/** Here comes error:
cannot find symbol
symbol : method binarySearch(sztejkat.utils.CSectionList,java.lang.Object)
location: class java.util.Collections
                int p = Collections.binarySearch(this,element);
          if (p<0)
public class CMemoryViewTable extends JTable
/** Here comes error:
name clash: setDefaultRenderer(java.lang.Class,javax.swing.table.TableCellRenderer) in sztejkat.hdl.debugger.ui.CMemoryViewTable and setDefaultRenderer(java.lang.Class<?>,javax.swing.table.TableCellRenderer) in javax.swing.JTable have the same erasure, yet neither overrides the other
public class CMemoryViewTable extends JTable
    public void setDefaultRenderer(Class columnClass,
                                         TableCellRenderer renderer)
          if (renderer!=null)
               super.setDefaultRenderer(columnClass,new CCursorRenderer(renderer));
          }else
           super.setDefaultRenderer(columnClass,null);
}In first example it seems to not catch that my CSectionList is a List<>, while in second it does not treat Class and Class<> equally what makes compiler to think that I don't override setDefaultRenderer method what I actually wanted to do (and did in 1.4).
Please help...
regards,
Tomasz Sztejka
P.S.
Where the source compatibility have gone between 1.4 and 1.5? If it will look like this I strongly vote to NOT touch java language specification - it was very nice, simple and clear language. With autoboxing and generics it starts to do a lot of things behind my back what I don't like - this is why I moved from C++ to Java - hate what C++ did with overloaded operators. But maybe I'm just to stupid.

Hi,
I'm still not getting a good grip on generics, and still think they are not necessary.True, but when you have assembler you might not need C or Java. With assembler, you can write the most efficient programmes, but fixing a bug is not easy. With the higher level of C and Java, fewer trivial errors are made. The introduction of generics is another step towards compile-time bug prevention.
Will your request block me from having a set of different classes,
derived from different superclasses, all
implementing Comparable in the way, that they use
instanceof to check for proper relation (ie. I would
like to sorting to sort all classes A by some value
and all classes B to land in front of list)?Regarding raw classes, my request will change the erased interface of Comparable from
int compareTo(Object o);to
int compareTo(Comparable o);This would mean that all non-generic implementions of Comparable would have to be modified. I should have requested this enhancement ten years ago, but back then I did not know about Java at all :(
Where largest common superclass is Object (ie Asuper
is not instanceof Bsuper and vice-versa).
Will soring list of such objects (both A and B) will
be legal after your RFE ?Both A and B implement Comparable, so that should not be a problem.

Package body greater than 2160 bytes does not compile in Object Browser

Similar Messages

Maybe you are looking for