Package creation error
I had done something like this before, but successfully, with no errors.
Any idea why I'm getting the error now? It's telling me I have failed to declare the package name.
Here's the code
PROCEDURE insert_vote_dev
(p_ctid IN NUMBER,
p_busvp IN VARCHAR2,
p_branch IN VARCHAR2,
p_vote IN VARCHAR2) IS
BEGIN INSERT INTO votetbl_dev (title, branch, id, vote)
VALUES (p_busvp, p_branch, p_ctid, p_vote);
END;
-- insert_vote_dev
PROCEDURE update_cc_admin_dev(p_ctrl IN NUMBER) IS
BEGIN
UPDATE change_control_admin_dev SET status1 = 'Active',status2 = 'Approved' WHERE
change_ctrl_id = p_ctrl;
END;
PROCEDURE ccstatus_proc_dev
(p_ctid IN NUMBER,
p_busvp IN VARCHAR2,
p_branch IN VARCHAR2,
p_vote IN VARCHAR2)
IS
BEGIN insert_vote_dev(p_ctid, p_busvp, p_branch, p_vote);
END;
-- ccstatus_proc 4 param
PROCEDURE ccstatus_proc_dev
(p_ctid IN NUMBER,
p_busvp IN VARCHAR2,
p_branch IN VARCHAR2,
p_vote IN VARCHAR2,
p_ctid2 IN NUMBER) IS
BEGIN insert_vote_dev(p_ctid, p_busvp, p_branch, p_vote);
update_cc_admin_dev(p_ctid2);
END;
-- ccstatus_proc 5 param
END; -- Package Body
/Any insight is appreciated!
Here are the errors!
LINE/COL ERROR
0/0 PL/SQL: Compilation unit analysis terminated
1/14 PLS-00201: identifier 'STAT_PKG_DEV' must be declared
1/14 PLS-00304: cannot compile body of 'STAT_PKG_DEV' without its
specification
Does that work after putting the slash at the end of both the create commands?
SQL> CREATE PACKAGE stat_dev_pkg AS
2 PROCEDURE ccstatus_dev_proc (p_ctid IN NUMBER,
3 p_busvp IN VARCHAR2,
4 p_branch IN VARCHAR2,
5 p_vote IN VARCHAR2);
6
7 PROCEDURE ccstatus_dev_proc (p_ctid IN NUMBER,
8 p_busvp IN VARCHAR2,
9 p_branch IN VARCHAR2,
10 p_vote IN VARCHAR2,
11 p_ctid2 IN NUMBER);
12
13
14 END;
15 /
Package created.
SQL>
SQL> CREATE PACKAGE BODY stat_dev_pkg AS
2 BEGIN
3 UPDATE CHANGE_CONTROL_ADMIN_DEV
4 SET status1 = 'Active',
5 status2 = 'Approved'
6 WHERE CHANGE_CTRL_ID = p_ctrl;
7 END;
8
9 PROCEDURE insert_vote_dev (p_ctid IN NUMBER,
10 p_busvp IN VARCHAR2,
11 p_branch IN VARCHAR2,
12 p_vote IN VARCHAR2) IS
13 BEGIN
14 INSERT INTO votetbl_dev (CHANGE_CTRL_ID,BUSVP,BRANCH,VOTE,VOTE_TIMESTAMP)
15 VALUES (p_ctid,LOWER(p_busvp),p_branch,p_vote,SYSDATE);
16 END; -- insert_vote_dev
17
18 PROCEDURE update_cc_admin_dev(p_ctrl IN NUMBER) IS
19 BEGIN
20 UPDATE CHANGE_CONTROL_ADMIN_DEV
21 SET status1 = 'Active',
22 status2 = 'Approved'
23 WHERE CHANGE_CTRL_ID = p_ctrl;
24 END;
25
26 PROCEDURE ccstatus_dev_proc (p_ctid IN NUMBER,
27 p_busvp IN VARCHAR2,
28 p_branch IN VARCHAR2,
29 p_vote IN VARCHAR2) IS
30 BEGIN
31 insert_vote_dev(p_ctid, LOWER(p_busvp), p_branch, p_vote);
32 END; -- ccstatus_dev_proc 4 param
33
34 PROCEDURE ccstatus_dev_proc (p_ctid IN NUMBER,
35 p_busvp IN VARCHAR2,
36 p_branch IN VARCHAR2,
37 p_vote IN VARCHAR2,
38 p_ctid2 IN NUMBER) IS
39 BEGIN
40 insert_vote_dev(p_ctid, LOWER(p_busvp), p_branch, p_vote);
41 update_cc_admin_dev(p_ctid2);
42 END; -- ccstatus_dev_proc 5 param
43 END; -- Package Body
44
45 /
Warning: Package Body created with compilation errors.
SQL> show errors
Errors for PACKAGE BODY STAT_DEV_PKG:
LINE/COL ERROR
9/1 PLS-00103: Encountered the symbol "PROCEDURE"
43/1 PLS-00103: Encountered the symbol "END" when expecting one of the
following:
begin function package pragma procedure form
SQL>
Similar Messages
-
We've got a customer who gets this error when attempting to install our software. My Google-fu makes me think this is a rare error. Chris, would you have any ideas as to the cause of this?
Many thanks,
Taylor
[2011-09-18:14:36:24] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-18:14:36:24] Commandline is:
[2011-09-18:14:36:24] No installed runtime detected
[2011-09-18:14:36:44] Relaunching with elevation
[2011-09-18:14:36:44] Launching subprocess with commandline c:\users\sawhit~1\appdata\local\temp\air9728.tmp\adobe air installer.exe -ei
[2011-09-18:14:36:52] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-18:14:36:52] Commandline is: -stdio \\.\pipe\AIR_6756_0 -ei
[2011-09-18:14:36:52] No installed runtime detected
[2011-09-18:14:36:54] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-18:14:36:54] Installing msi at c:\users\sawhit~1\appdata\local\temp\air9728.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-18:14:37:29] Runtime Installer end with exit code 0
[2011-09-18:14:37:30] Elevated install completed
[2011-09-18:14:37:37] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
[2011-09-18:14:37:37] Runtime Installer end with exit code 0
[2011-09-18:14:37:43] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-18:14:37:43] Commandline is: -installupdatecheck
[2011-09-18:14:37:43] Installed runtime (2.7.1.19610) located at c:\Program Files\Common Files\Adobe AIR
[2011-09-18:14:37:48] Performing pingback request
[2011-09-18:14:37:49] Pingback request completed with HTTP status 200
[2011-09-18:14:37:49] Starting runtime background update check
[2011-09-18:14:37:49] Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/2.7.1.19610/update
[2011-09-18:14:37:49] Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/2.7.1.19610/update to C:\Users\sawhitman\AppData\Roaming\Adobe\AIR\Updater\Background
[2011-09-18:14:37:50] Runtime update not available
[2011-09-18:14:37:50] Unpackaging cancelled
[2011-09-18:14:37:50] Runtime Installer end with exit code 0
[2011-09-18:14:42:13] Application Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-18:14:42:13] Commandline is: C:\Users\SAWHIT~1\AppData\Local\Temp\YNAB3_Live_3.5.3.4-2.air
[2011-09-18:14:42:13] Installed runtime (2.7.1.19610) located at c:\Program Files\Common Files\Adobe AIR
[2011-09-18:14:42:16] Unpackaging file:///C:/Users/SAWHIT~1/AppData/Local/Temp/YNAB3_Live_3.5.3.4-2.air to C:\Users\sawhitman\AppData\Local\Temp\flaB571.tmp
[2011-09-18:14:42:39] Application signature verified
[2011-09-18:14:42:39] Unpackaging/validation complete
[2011-09-18:14:42:39] No app located for appID 'com.youneedabudget.YNAB3.Live' and pubID '9C763150EFAB05FD2A2B78705C7A54E2FCDDE07D.1'
[2011-09-18:14:42:50] Converting unpackaged application to a native installation package in C:\Users\sawhitman\AppData\Local\Temp\fla3A1C.tmp
[2011-09-18:14:43:03] Native installation package creation failed: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Unhandled exception Error: EndUpdateResource: Windows Error #5" errorID=0]
[2011-09-18:14:43:13] Application Installer end with exit code 7
[2011-09-18:14:43:20] Application Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-18:14:43:20] Commandline is: C:\Users\SAWHIT~1\AppData\Local\Temp\YNAB3_Live_3.5.3.4-2.air
[2011-09-18:14:43:20] Installed runtime (2.7.1.19610) located at c:\Program Files\Common Files\Adobe AIR
[2011-09-18:14:43:24] Unpackaging file:///C:/Users/SAWHIT~1/AppData/Local/Temp/YNAB3_Live_3.5.3.4-2.air to C:\Users\sawhitman\AppData\Local\Temp\flaC01C.tmp
[2011-09-18:14:43:37] Application signature verified
[2011-09-18:14:43:37] Unpackaging/validation complete
[2011-09-18:14:43:37] No app located for appID 'com.youneedabudget.YNAB3.Live' and pubID '9C763150EFAB05FD2A2B78705C7A54E2FCDDE07D.1'
[2011-09-18:14:43:59] Converting unpackaged application to a native installation package in C:\Users\sawhitman\AppData\Local\Temp\fla47B3.tmp
[2011-09-18:14:44:16] Native installation package creation failed: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Unhandled exception Error: EndUpdateResource: Windows Error #5" errorID=0]
[2011-09-18:14:44:28] Application Installer end with exit code 7On Windows 7, make sure you are running as Administrator:
Download and install Adobe AIR from this page
Download YNAB3_Live_3.5.3.4.air to a folder on your computer.
Navigate to the folder on your computer where you saved the YNAB3_Live_3.5.3.4.air. If you are on Windows Vista or Windows 7, right-click on the file and choose “Run as Administrator.” For Mac, Linux, and all other versions of Windows, simply double-click on it to install YNAB 3.
Thanks,
Lisa Chao
Adobe Flash Runtime Team -
Hi ,
I created package name BBP_ESI, with the following information:
Appl. Component - MM
software component - SAP_APPL
Assign BBP_ESI as a sub package to PI-B2B .
1, Where can i find Allowed Objects types in the package creation ,i am using SAP 6.0 version .
2, When i create a report and save it in this package BBP_ESI, its giving error Customer object PROG ZFCI_BBP_ESI_IDOC_SETUP cannot be assigned to package BBP_ESI . Please let me know why i am getting this error .
Thanks In Advance .
Regards,
Neelimasee SAP documentation for package naming convention:
Packages
The following namespaces are available for packages:
Package names beginning with a letter from A to S, or from U to X.
Package names beginning with these letters are reserved for objects of the SAP standard system from the SAP namespace. You cannot create customer objects or objects from prefix namespaces in these packages.
Note that the package name must be no more than 30 characters long. The name of the main package should reflect the content of the package Adjacent packages should have similar names.
The Transport Organizer records changes to objects in these packages, so that they can be transported.
These packages belong to the "SAP" transport layer and are assigned to an SAP software component (such as SAP_BASIS, SAP_APPL).
Package names beginning with Y or Z
You can create customer-specific objects from the customer namespace in these packages.
The Transport Organizer records changes to objects in these packages, so that they can be transported, provided the SAP System has been set up appropriately. (For more information, see Setting the System Change Option). These packages are assigned to the software component HOME.
So create the packages accordingly... -
Hi all, i have tried to define a new VIP on my ORACLE 11gR2 RAC cluster, in order to manage third-party component by using ORACLE Clusterware.
I have used the info written on the ORACLE manual "Oracle Clusterware Administration and Deployment Guide E10717-04" at page 5-15.
I have executed the command "/u01/app/grid/bin/appvipcfg create -network=1 -ip=xx.xxx.xxx.140 -vipname=appsVIP -user=root", as the manual says, from root user.
My environment is AIX 6.1.
Unfortunately, i get an error (reported following) but i am not able to solve it.
Please, may you help me?
Thanks
Marco
CUSTOM VIP CREATION ERROR
[nodo01][]>/u01/app/grid/bin/appvipcfg create -network=1 -ip=xx.xxx.xxx.140 -vipname=appsVIP -user=root
Production Copyright 2007, 2008, Oracle.All rights reserved
2010-05-31 18:39:54: Creating Resource Type
2010-05-31 18:39:54: Executing cmd: /u01/app/grid/bin/crsctl add type app.appvip.type -basetype cluster_resource -file
/u01/app/grid/crs/template/appvip.type
2010-05-31 18:39:55: Create the Resource
2010-05-31 18:39:55: Executing cmd: /u01/app/grid/bin/crsctl add resource appsVIP -type app.appvip.type -attr
USR_ORA_VIP=xx.xxx.xxx.,START_DEPENDENCIES=hard(ora.net1.network)
pullup(ora.net1.network),STOP_DEPENDENCIES=hard(ora.net1.network),ACL='owner:root:rwx,pgrp:root:r-x,other::r--,user:root:r-x'
CRS-0247: User name or group name is invalid
CRS-4000: Command Add failed, or completed with errors.
Command return code of 1 (256) from command: /u01/app/grid/bin/crsctl add resource appsVIP -type app.appvip.type -attr
USR_ORA_VIP=xx.xxx.xxx.,START_DEPENDENCIES=hard(ora.net1.network)
pullup(ora.net1.network),STOP_DEPENDENCIES=hard(ora.net1.network),ACL='owner:root:rwx,pgrp:root:r-x,other::r--,user:root:r-x'
2010-05-31 18:39:56: ###### Begin Error Stack Trace ######
2010-05-31 18:39:56: Package File Line Calling
2010-05-31 18:39:56: --------------- -------------------- ---- ----------
2010-05-31 18:39:56: 1: crsconfig_lib crsconfig_lib.pm 7474 crsconfig_lib::error
2010-05-31 18:39:56: 2: main appvipcfg.pl 241 crsconfig_lib::system_cmd
2010-05-31 18:39:56: 3: main appvipcfg.pl 93 main::config
2010-05-31 18:39:56: 4: main appvipcfg.pl 74 main::process_arguments
2010-05-31 18:39:56: ####### End Error Stack Trace #####
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Hi,
On Solaris 10 and Oracle Grid Infrastructure 11.2.0.2 did the following. Posting this as it might be useful to someone else. Installed Grid Infrastructure as oracle.
As root:
# ${GRID_HOME}/bin/appvipcfg create -network=1 -ip=<vip_address> -vipname=<vip_name> -user=root
In the above command, if you are wondering what -network=1 is, got useful info from "Oracle GoldenGate high availability using Oracle Clusterware" white paper at http://www.oracle.com/technetwork/middleware/goldengate/overview/ha-goldengate-whitepaper-128197.pdf
As per the white paper, if you do
crsctl status resource -p | egrep -i 'network|subnet' | egrep -i 'name|subnet'
output will look something like this:
NAME=ora.net1.network
USR_ORA_SUBNET=10.2.0.0
net1 in NAME indicates this is network 1, and second line indicates the subnet on which the vip will be created.
# ${GRID_HOME}/bin/crsctl setperm resource <vip_name> -u user:oracle:r-x
I did the following as oracle:
Oracle_Prompt> ${GRID_HOME}/bin/crsctl start resource <vip_name>
If you want to relocate this vip to other node in the cluster:
Oracle_Prompt> ${GRID_HOME}/bin/crsctl relocate resource <vip_name> -s <source_node> -n <target_node>
Hope this helps.
Thanks,
Moorthy.
帖子经 Moorthy Rekapalli编辑过 -
hi,
i am totally new to this technology.
i had created 3 Zone's on X86 Sun Fire X4270 M2 Hardware (OS - Solaris 10 update 9)
& during OS Installation i had selected Software installations using the Entire Distribution.
every thing worked fine but during zone installation steps, got some package installation error (refer the below output)
bash-3.00# zoneadm -z OFSMU-PWM-zone1 install
Preparing to install zone <OFSMU-PWM-zone1>.
Creating list of files to copy from the global zone.
Copying <158400> files to the zone.
Initializing zone product registry.
Determining zone package initialization order.
Preparing to initialize <1240> packages on the zone.
Initialized <1240> packages on zone.
Zone <OFSMU-PWM-zone1> is initialized.
Installation of these packages generated errors: <SUNWpostgr-82-libs SUNWpostgr-82-devel SUNWpostgr-83-server-data-root SUNWpostgr-82-server SUNWpostgr-82-contrib SUNWpostgr-82-client SUNWpostgr-82-server-data-root>
The file </zone/OFSMU-PWM-zone1/root/var/sadm/system/logs/install_log> contains a log of the zone installation.
i checked the log file "/zone/OFSMU-PWM-zone1/root/var/sadm/system/logs/install_log"
its show below error's
*** package <SUNWpostgr-82-libs> failed to install with fatal errors:
*** package <SUNWpostgr-82-devel> failed to install with fatal errors:
need your help my friends..
thanks in advance....
Edited by: Raja Kondar on Dec 9, 2010 11:59 AMhi DR,
thnks for reply..
but i can see that "postgres" already exist in the system as user &l group.
postgres:x:90:90:PostgreSQL Reserved UID:/:/usr/bin/pfksh
also the failed packages duirng zone creation steps are already installed in the global zone..
is thr any other way to resolve this issue....
Edited by: Raja Kondar on Dec 16, 2010 11:00 AM -
Package installation error during zone installation
Hi All
I am getting a lot of errors from package installations during zone installation
Installation of these packages generated errors: <SUNWcsu SUNWckr SUNWgnome-base-libs SUNWgnome-audio SUNWtltk SUNWzoner SUNWzfskr SUNWzfsr SUNWzfsu SUNWzoneu SUNWtoo SUNWssad SUNWusb SUNWtavor SUNWudapltu SUNWopenssl-libraries SUNWwbsup SUNWPython SUNWbip SUNWxge SUNWxcu4 SUNWxcu6 SUNWcry SUNWntp4u SUNWqlc SUNWqlcu SUNWgnome-im-client SUNWgnome-img-editor SUNWsndmr SUNWsndmu SUNWsshcu SUNWsshdu SUNWsshu SUNWgnome-text-editor>
When I look into /var/sadm/system/logs/install_log in the zone, I am seeing the erros are relate to file corruption:
*** package <SUNWckr> failed to install - interrupted:
pkgadd: ERROR: packaging file </var/sadm/pkg/SUNWckr/save/pspool/SUNWckr/pkginfo
is corruptfile size <17259> expected <17199> actual
*** package <SUNWsshcu> failed to install - interrupted:
pkgadd: ERROR: packaging file </var/sadm/pkg/SUNWsshcu/save/pspool/SUNWsshcu/pkg
info> is corrupt
file size <6235> expected <7087> actual
as an example, the pkginfo file referred to above has size 17199 and 7087 in the global zone so why is it thinking it should be 17259 and 6235? Could this be due to the patching done before the zone creation?
thanksI just realized what is causing this but no sure what is the best way to get around this:
we have another home grown package the overwrite the problematic files reported thay lay on top of the sun packages and zone installation does not like that. The original file size and check sum is checked against what was installed in the global zone and hence the warning messages.
I would have thought it should pick the most updated ones especially it was overwritten by another package (and therefore it should have the updated information in the package database)? -
Download Helper Screen Capture worked to capture video if the default "no audio" option is active. But, no audio. The "speakers" or "microphone" audio options are confusing....the audio to be captured is from the video, so what do you choose? With either "speakers" or "microphone" selected, the captured file has poor audio and no video. Re-capture efforts (speakers) get "Invalid capture file error" and "File Creation error- Unable to rename/copy audio file"
The paid upgrade of "Converter" doesn't work.
Instructive documentation - not very good.
Suggestions - Need time delay between initiation of "Record" and starting the video to be recorded.
Could use timer tracking of the record process.
Are there operating system limitations? (Have Windows XP Pro)That is an issue for the developer of that Download Helper.
-
Failed to load Execute Package Task error.
Hello Experts,
Excuse my newbie question.
Execute Package Task: Error: The task has failed to load. The contact information for the task is "Microsoft Corporation; Microsoft SQL Server; Microsoft corporation; All Rights Reserved http://www.microsoft.com/sql/support/default.asp:1"
We have a windows service running on our app server that deploys a package that executes other packages using execute package task. This package and rest of the packages are in the same folder at the same level under integration services
catalog. The package fails to execute with the above said error.
Execute package task is configured to run in 'in-process' mode. Changing delay validation to true/false in child packages didn't help.
ironically if the package is deployed using a console application from the app server the package gets executed just fine. I checked permissions, everything seem fine.
Is there anyway to get details of this error to understand the problem better? I am looking at reports > standard reports > all executions.
Thanks.As it turns out, the 63bit ExecPackageTask.dll was not found under "C:\Program Files\Microsoft SQL Server\110\DTS\Binn". Installing "SQL Server Data Tools" installed only 32 bit version of the component under "C:\Program Files (x86)\Microsoft SQL
Server\110\DTS\Binn".
Is there a way to get 64bit version of this component without installing "Integration Services" (to avoid possible license issues)?
Hi Jayakarthiks,
To make use of the 64-bit ExecPackageTask.dll, you also need the 64-bit SSIS runtime and 64-bit DTExec utility tool. To obtain the 64-bit SSIS runtime and tools, you have to install the SQL Server Integration Services service from your SQL Server 2012 install
media.
Reference:
http://msdn.microsoft.com/en-us/library/ms143731.aspx
Regards,
Mike Yin
If you have any feedback on our support, please click here
Mike Yin
TechNet Community Support -
Hi all
when i run yaourt to install any things :
package-query: error while loading shared libraries: libcurl.so.4: cannot open shared object file: No such file or directory
why?
what can i do?
I'm very newbie so help me with easy commands!
thankstry to reinstall yahourt :
https://wiki.archlinux.org/index.php/Yaourt -
I sometimes get the following error randomly -
Package Validation Error
ADDITIONAL INFORMATION:
Error at MY_PACKAGE_PLUS[Connection manager "MY_DATABASE"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80040E4D Description: "Login failed for user 'USERNAMEZ'.".
Error at MY_PACKAGE_PLUS [Log provider "SSIS log provider for SQL Server"]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "MY_DATABASE" failed with error
code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
(Microsoft.DataTransformationServices.VsIntegration)
My package name in SSIS/BIDS is MY_PACKAGE, but in the error I see MY_PACKAGE_PLUS, which was the name of an older version of the package. This error goes away when I close SSIS and then restart it. I wonder why this happens and how do I fix it
? Is this some bug in SSIS ? The same package runs without errors in SQL server agent.
Thanks.It seems the old package reference still exists in your project bin folder or inside stproj file. WHich is why it tries to validate the older package each time when you start the project.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Hi
I may have come to the wrong Forum and if so my apologies but if there is some one who could let me know if i need be concerned of the following errors i have just noticed in Console after having done recent Java And Safari update today.both installations i believe were completed successfully but console is showing the following message.
13/03/2011 13:43:52 Software Update[133] Software Update Package Authoring Error: installation-check results requires a message
13/03/2011 13:38:58 Software Update[136] Software Update Package Authoring Error: <choices-outline ui='SoftwareUpdate'> should only have one <line> element. Put additional <line> elements in a <choices-outline ui='invisible'> element.
Thanks in advance
Colemach_kernel file missing in root of harddrive
replaced, now working again -
Service Contracts Billing Schedule Creation Error
Hi,
I have a requirement of creating service contracts from back-end for which I am using the oks_contracts_pub.create_contract_header, create_service_line, and create_bill_schedule. I am creating my contracts with active status and renewal type of EVN (Header level), FUL(Line Level). My contract is of type subscription. The contract header and line are creating fine but the Bill schedule API is throwing an UNEXPECTED ERROR. The billing schedules need to be created based on accounting rule which can be quarterly or monthly. I have included the bill schedule code (hard coded values) for review. Any help is greatly appreciated.
Also the version I am working on is R12
________________________________________________CODE___________________________________________________________________
CREATE OR REPLACE PROCEDURE BILLING_SCHEDULE AS
l_strm_level_tbl OKS_BILL_SCH.STREAMLVL_TBL;
v_bill_qtrs NUMBER := 0;
v_bill_mths NUMBER := 0;
v_bill_days NUMBER := 0;
v_net_amount NUMBER := 468;
v_acct_rule_name VARCHAR2(50) := 'QUARTERLY';
v_amt_per_day NUMBER;
x_error_locator VARCHAR2(2000);
v_start_date DATE := '04-MAY-2010';
v_end_date DATE := '25-MAY-2010';
x_return_status VARCHAr2(3);
x_msg_count NUMBER;
x_msg_data VARCHAR2(2000);
v_billing_sequence NUMBER;
x_chr_id NUMBER := 17000;
x_line_id NUMBER := 223248604345353294444923586786456728480;
g_day_uom VARCHAR2(10) := 'DAY';
g_month_uom VARCHAR2(10) := 'MTH';
g_quarter_uom VARCHAR2(10) := 'QTR';
v_amt NUMBER;
v_invoicing_rule_id NUMBER := -2;
BEGIN
--Create Billing Schedule based on accounting rule
okc_context.set_okc_org_context;
MO_GLOBAL.INIT('OKS');
MO_GLOBAL.SET_POLICY_CONTEXT('S', 83);
v_bill_qtrs := 0;
v_bill_days := 0;
v_bill_mths := 0;
SELECT NVL(v_net_amount, 0)/(v_end_date - v_start_date)
INTO v_amt_per_day
FROM dual;
dbms_output.put_line('Calculated amt per day ' || v_amt_per_day);
IF v_acct_rule_name LIKE '%QUARTERLY%' THEN
--Quarterly billing schedule
SELECT FLOOR(MONTHS_BETWEEN( v_end_date,
v_start_date)/3),
v_end_date - ADD_MONTHS(v_start_date, (FLOOR(MONTHS_BETWEEN(v_end_date, v_start_date)/3)*3))
INTO v_bill_qtrs,
v_bill_days
FROM dual;
dbms_output.put_line('Calculated the qtrs and days');
IF v_bill_qtrs > 0 THEN
SELECT (ADD_MONTHS(v_start_date, (FLOOR(MONTHS_BETWEEN(v_end_date, v_start_date)/3)*3)) - v_start_date)*v_amt_per_day
INTO v_amt
FROM dual;
dbms_output.put_line('Calculated qtr amt');
SELECT NVL(MAX(sequence_no), 0) + 1
INTO v_billing_sequence
FROM oks_stream_levels_b
WHERE dnz_chr_id = x_chr_id
AND cle_id = x_line_id;
--Populating the stream line variables
l_strm_level_tbl(v_billing_sequence).sequence_no := v_billing_sequence;
l_strm_level_tbl(v_billing_sequence).dnz_chr_id := x_chr_id;
-- l_strm_level_tbl(v_billing_sequence).id := x_line_id;
l_strm_level_tbl(v_billing_sequence).cle_id := x_line_id;
l_strm_level_tbl(v_billing_sequence).uom_code := g_quarter_uom;
l_strm_level_tbl(v_billing_sequence).uom_per_period := 1;
l_strm_level_tbl(v_billing_sequence).level_periods := v_bill_qtrs;
l_strm_level_tbl(v_billing_sequence).start_date := v_start_date;
l_strm_level_tbl(v_billing_sequence).end_date := v_end_date;
l_strm_level_tbl(v_billing_sequence).invoice_offset_days := NULL;
l_strm_level_tbl(v_billing_sequence).amount := v_amt/v_bill_qtrs;
l_strm_level_tbl(v_billing_sequence).level_amount := v_amt/v_bill_qtrs;
l_strm_level_tbl(v_billing_sequence).lines_detailed_yn := 'Y';
l_strm_level_tbl(v_billing_sequence).due_arr_yn := 'Y';
dbms_output.put_line('Before calling the Bill Sch API for QTR');
OKS_CONTRACTS_PUB.CREATE_BILL_SCHEDULE ( p_billing_sch=>'E',
p_strm_level_tbl=>l_strm_level_tbl,
p_invoice_rule_id=>v_invoicing_rule_id,
x_return_status=>x_return_status);
dbms_output.put_line('After calling the Bill Sch API for QTR');
IF x_return_status <> 'S' THEN
x_msg_count := 1;
dbms_output.put_line('Quarterly schedule creation error ' || x_msg_data);
---DBMS_TRANSACTION.ROLLBACK_SAVEPOINT('OKS_A');
-- RETURN;
END IF;
END IF;
IF v_bill_days > 0 THEN
SELECT NVL(MAX(sequence_no), 0) + 1
INTO v_billing_sequence
FROM oks_stream_levels_b
WHERE dnz_chr_id = x_chr_id
AND cle_id = x_line_id;
dbms_output.put_line('sequence '||v_billing_sequence);
--Populating the stream line variables
l_strm_level_tbl(v_billing_sequence).sequence_no := v_billing_sequence;
l_strm_level_tbl(v_billing_sequence).dnz_chr_id := x_chr_id;
--l_strm_level_tbl(v_billing_sequence).id := x_line_id;
l_strm_level_tbl(v_billing_sequence).cle_id := x_line_id;
l_strm_level_tbl(v_billing_sequence).uom_code := g_day_uom;
l_strm_level_tbl(v_billing_sequence).uom_per_period := v_bill_days;
l_strm_level_tbl(v_billing_sequence).level_periods := 1;
l_strm_level_tbl(v_billing_sequence).start_date := v_start_date;
l_strm_level_tbl(v_billing_sequence).end_date := v_end_date;
l_strm_level_tbl(v_billing_sequence).invoice_offset_days := NULL;
l_strm_level_tbl(v_billing_sequence).amount := v_net_amount;--v_amt_per_day*v_bill_days;
l_strm_level_tbl(v_billing_sequence).level_amount := v_net_amount;--v_amt_per_day*v_bill_days;
l_strm_level_tbl(v_billing_sequence).lines_detailed_yn := 'Y';
l_strm_level_tbl(v_billing_sequence).due_arr_yn := 'Y';
dbms_output.put_line('Before calling the Bill Sch API for QTR days');
OKS_CONTRACTS_PUB.CREATE_BILL_SCHEDULE ( p_billing_sch=>'E',
p_strm_level_tbl=>l_strm_level_tbl,
p_invoice_rule_id=>v_invoicing_rule_id,
x_return_status=>x_return_status);
dbms_output.put_line('After calling the Bill Sch API for QTR days ' || v_bill_days || ' ' || x_return_status);
IF x_return_status <> 'S' THEN
x_msg_count := 1;
dbms_output.put_line('Day schedule, for quarterly accounting rule, creation error ' || x_msg_data);
--DBMS_TRANSACTION.ROLLBACK_SAVEPOINT('OKS_A');
--RETURN;
END IF;
END IF;
ELSE
--Monthly billing schedule
SELECT FLOOR(MONTHS_BETWEEN( v_end_date,
v_start_date)),
v_end_date - ADD_MONTHS(v_start_date, FLOOR(MONTHS_BETWEEN(v_end_date, v_start_date)))
INTO v_bill_mths,
v_bill_days
FROM dual;
dbms_output.put_line('Calculated the mths and days');
IF v_bill_mths > 0 THEN
SELECT (ADD_MONTHS(v_start_date,FLOOR(MONTHS_BETWEEN(v_end_date, v_start_date))) - v_start_date)*v_amt_per_day
INTO v_amt
FROM dual;
dbms_output.put_line('Calculated the mths amt');
SELECT NVL(MAX(sequence_no), 0) + 1
INTO v_billing_sequence
FROM oks_stream_levels_b
WHERE dnz_chr_id = x_chr_id
AND cle_id = x_line_id;
--Populating the stream line variables
l_strm_level_tbl(v_billing_sequence).sequence_no := v_billing_sequence;
l_strm_level_tbl(v_billing_sequence).dnz_chr_id := x_chr_id;
--l_strm_level_tbl(v_billing_sequence).id := x_line_id;
l_strm_level_tbl(v_billing_sequence).cle_id := x_line_id;
l_strm_level_tbl(v_billing_sequence).uom_code := g_month_uom;
l_strm_level_tbl(v_billing_sequence).uom_per_period := 1;
l_strm_level_tbl(v_billing_sequence).level_periods := v_bill_mths;
l_strm_level_tbl(v_billing_sequence).start_date := v_start_date;
l_strm_level_tbl(v_billing_sequence).end_date := v_end_date;
l_strm_level_tbl(v_billing_sequence).invoice_offset_days := NULL;
l_strm_level_tbl(v_billing_sequence).amount := v_amt/v_bill_mths;
l_strm_level_tbl(v_billing_sequence).level_amount := v_amt/v_bill_mths;
l_strm_level_tbl(v_billing_sequence).lines_detailed_yn := 'Y';
l_strm_level_tbl(v_billing_sequence).due_arr_yn := 'Y';
dbms_output.put_line('Before calling the Bill Sch API for MTHS');
OKS_CONTRACTS_PUB.CREATE_BILL_SCHEDULE ( p_billing_sch=>'E',
p_strm_level_tbl=>l_strm_level_tbl,
p_invoice_rule_id=>v_invoicing_rule_id,
x_return_status=>x_return_status);
dbms_output.put_line('After calling the Bill Sch API for MTHS');
IF x_return_status <> 'S' THEN
x_msg_count := 1;
dbms_output.put_line('Monthly schedule creation error ' || x_msg_data);
--DBMS_TRANSACTION.ROLLBACK_SAVEPOINT('OKS_A');
--RETURN;
END IF;
END IF;
IF v_bill_days > 0 THEN
SELECT NVL(MAX(sequence_no), 0) + 1
INTO v_billing_sequence
FROM oks_stream_levels_b
WHERE dnz_chr_id = x_chr_id
AND cle_id = x_line_id;
--Populating the stream line variables
l_strm_level_tbl(v_billing_sequence).sequence_no := v_billing_sequence;
l_strm_level_tbl(v_billing_sequence).dnz_chr_id := x_chr_id;
--l_strm_level_tbl(v_billing_sequence).id := x_line_id;
l_strm_level_tbl(v_billing_sequence).cle_id := x_line_id;
l_strm_level_tbl(v_billing_sequence).uom_code := g_day_uom;
l_strm_level_tbl(v_billing_sequence).uom_per_period := v_bill_days;
l_strm_level_tbl(v_billing_sequence).level_periods := 1;
l_strm_level_tbl(v_billing_sequence).start_date := v_start_date;
l_strm_level_tbl(v_billing_sequence).end_date := v_end_date;
l_strm_level_tbl(v_billing_sequence).invoice_offset_days := NULL;
l_strm_level_tbl(v_billing_sequence).amount := v_amt_per_day*v_bill_days;
l_strm_level_tbl(v_billing_sequence).level_amount := v_amt_per_day*v_bill_days;
l_strm_level_tbl(v_billing_sequence).lines_detailed_yn := 'Y';
l_strm_level_tbl(v_billing_sequence).due_arr_yn := 'Y';
dbms_output.put_line('Before calling the Bill Sch API for MTH days');
OKS_CONTRACTS_PUB.CREATE_BILL_SCHEDULE ( p_billing_sch=>'E',
p_strm_level_tbl=>l_strm_level_tbl,
p_invoice_rule_id=>v_invoicing_rule_id,
x_return_status=>x_return_status);
dbms_output.put_line('After calling the Bill Sch API for MTH days');
IF x_return_status <> 'S' THEN
x_msg_count := 1;
dbms_output.put_line('Day schedule, for monthly accounting rule, creation error ' || x_msg_data);
--DBMS_TRANSACTION.ROLLBACK_SAVEPOINT('OKS_A');
--RETURN;
END IF;
END IF;
END IF;
COMMIT;
EXCEPTION
when others then
dbms_output.put_line('Error ' || sqlerrm);
END;
Thanks,
Yash.Hi There,
I have a similar requirement to create rental service contracts and create billing schedules.
Can you please pass on your functional docs so that i can refer to them.
Thanks,
Raidu -
Request creation error for mitigation control workflow
Dear Expert,
I had activiate the workflow from RAR to CUP on Mitigated User assignment, I had completed following customizing:
1)RAR->configaration->Workflow
2)CUP->configaration->initiator, stage, path.
but when I created mitigated user assignments in RAR, after click "Submit", error popup: "Request creation error"
can some one help?
thanks!Dear,
the log is below:
ERROR service 'SAPGW00' unknown
TIME Thu May 20 13:33:16 2010
RELEASE 701
COMPONENT NI (network interface)
VERSION 38
RC -3
MODULE niuxi.c
LINE 1732
DETAIL NiPGetServByName2: service 'SAPGW00' not found
SYSTEM CALL getservbyname_r
COUNTER 375
May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
INFO: Exception in Server YYY:
com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
Could not start server: Connect to SAP gateway failed
Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
ERROR service 'SAPGW00' unknown
TIME Thu May 20 13:33:16 2010
RELEASE 701
COMPONENT NI (network interface)
VERSION 38
RC -3
MODULE niuxi.c
LINE 1732
DETAIL NiPGetServByName2: service 'SAPGW00' not found
SYSTEM CALL getservbyname_r
COUNTER 375
May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
INFO: Exception in Server YYY:
com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
Could not start server: Connect to SAP gateway failed
Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
ERROR service 'SAPGW00' unknown
TIME Thu May 20 13:33:16 2010
RELEASE 701
COMPONENT NI (network interface)
VERSION 38
RC -3
MODULE niuxi.c
LINE 1732
DETAIL NiPGetServByName2: service 'SAPGW00' not found
SYSTEM CALL getservbyname_r
COUNTER 375
May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
INFO: Exception in Server YYY:
com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
Could not start server: Connect to SAP gateway failed
Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
ERROR service 'SAPGW00' unknown
TIME Thu May 20 13:33:16 2010
RELEASE 701
COMPONENT NI (network interface)
VERSION 38
RC -3
MODULE niuxi.c
LINE 1732
DETAIL NiPGetServByName2: service 'SAPGW00' not found
SYSTEM CALL getservbyname_r
COUNTER 375
May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
INFO: Exception in Server YYY:
com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
Could not start server: Connect to SAP gateway failed
Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
ERROR service 'SAPGW00' unknown
TIME Thu May 20 13:33:16 2010
RELEASE 701
COMPONENT NI (network interface)
VERSION 38
RC -3
MODULE niuxi.c
LINE 1732
DETAIL NiPGetServByName2: service 'SAPGW00' not found
SYSTEM CALL getservbyname_r
COUNTER 375
May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
INFO: Exception in Server YYY:
com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
Could not start server: Connect to SAP gateway failed
Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
ERROR service 'SAPGW00' unknown
TIME Thu May 20 13:33:16 2010
RELEASE 701
COMPONENT NI (network interface)
VERSION 38
RC -3
MODULE niuxi.c
LINE 1732
DETAIL NiPGetServByName2: service 'SAPGW00' not found
SYSTEM CALL getservbyname_r
COUNTER 375
May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
INFO: Exception in Server YYY:
com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
Could not start server: Connect to SAP gateway failed
Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
ERROR service 'SAPGW00' unknown
TIME Thu May 20 13:33:16 2010
RELEASE 701
COMPONENT NI (network interface)
VERSION 38
RC -3
MODULE niuxi.c
LINE 1732
DETAIL NiPGetServByName2: service 'SAPGW00' not found
SYSTEM CALL getservbyname_r
COUNTER 375
May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
INFO: Exception in Server YYY:
com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
Could not start server: Connect to SAP gateway failed
Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
ERROR service 'SAPGW00' unknown
TIME Thu May 20 13:33:16 2010
RELEASE 701
COMPONENT NI (network interface)
VERSION 38
RC -3
MODULE niuxi.c
LINE 1732
DETAIL NiPGetServByName2: service 'SAPGW00' not found
SYSTEM CALL getservbyname_r
COUNTER 375
May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
INFO: Exception in Server YYY:
com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
Could not start server: Connect to SAP gateway failed
Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
ERROR service 'SAPGW00' unknown
TIME Thu May 20 13:33:16 2010
RELEASE 701
COMPONENT NI (network interface)
VERSION 38
RC -3
MODULE niuxi.c
LINE 1732
DETAIL NiPGetServByName2: service 'SAPGW00' not found
SYSTEM CALL getservbyname_r
COUNTER 375
May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
INFO: Exception in Server YYY:
com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
Could not start server: Connect to SAP gateway failed
Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
ERROR service 'SAPGW00' unknown
TIME Thu May 20 13:33:16 2010
RELEASE 701
COMPONENT NI (network interface)
VERSION 38
RC -3
MODULE niuxi.c
LINE 1732
DETAIL NiPGetServByName2: service 'SAPGW00' not found
SYSTEM CALL getservbyname_r
COUNTER 375
May 20, 2010 2:10:50 PM com.virsa.cc.workflow.bo.WorkflowBO submit
INFO: END POOINT URL: http://9.186.143.129:50100/AEWFRequestSubmissionService_5_2/Config1?style=document
May 20, 2010 2:10:50 PM com.virsa.cc.workflow.bo.WorkflowBO submit
INFO: before submit:
May 20, 2010 2:10:50 PM com.virsa.cc.workflow.bo.WorkflowBO submit
INFO: wftype: MITIOBJ reqid: GRC01
May 20, 2010 2:10:50 PM com.virsa.cc.rulearchitect.dao.dto.MitObjDTO getObjContext
FINEST: validfrom: 2010-05-20 validto: 2011-05-20
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Data Type: String
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Descripton: MITREFNO
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Name: MOMITREFNO
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Value: CT01
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Data Type: String
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Descripton: RISKID
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Name: MORISKID
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Value: ZC02
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Data Type: String
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Descripton: LANG
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Name: LANG
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Value: EN
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Data Type: String
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Descripton: MONITORID
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Name: MONITORID
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Value: GRC01
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Data Type: Integer
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Descripton: STATUS
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Name: MOSTATUS
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Value: 0
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Data Type: DATE
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Descripton: VALIDFROM
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Name: VALIDFROM
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Value: 05/20/2010
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Data Type: DATE
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Descripton: VALIDTO
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Name: VALIDTO
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Value: 05/20/2011
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Data Type: String
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Descripton: BU ID
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Name: BUID
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Value: null
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Data Type: String
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Descripton: Approver ID
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Name: MOAPPROVERID
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Value: null
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Data Type: String
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Descripton: OBJTYPE
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Name: OBJTYPE
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Value: U
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Data Type: String
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Descripton: OBJID
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Name: OBJID
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Value: 207471
May 20, 2010 2:10:50 PM com.virsa.cc.workflow.bo.WorkflowBO submit
INFO: Return code: 2010 Message: com.virsa.ae.core.ObjectNotFoundException: Invalid Priority Value : MO_HIGH workflow id: null Status: null
May 20, 2010 2:10:50 PM com.virsa.cc.workflow.bo.WorkflowBO submit
WARNING: 2010: null -
Transport and package creation
Hello SAP Masters,
I am looking for some details guideline about package creation and sap crm transport layer. I mean how to create different packages and how to transport from one server to another.
Looking for your reply.
Thanks and Regards
RahulHi Rahul,
would recommend the following help links: http://help.sap.com/saphelp_nw70/helpdata/en/57/38ddb14eb711d182bf0000e829fbfe/content.htm
and http://help.sap.com/saphelp_nw70/helpdata/en/af/40bd38652c8c42e10000009b38f8cf/content.htm
Best Regards,
Michael -
How to create a security role to delegate package creation and deployment?
Hi,
I am new to SCCM 2012 and I would like to delegate packaging and deployment based on an AD container and user. For example, I have a US-SCCM-Admin account created in the US OU in Active Directory. I also have computers in the US Computers OU in AD. I am
not sure what settings I need so that the US-SCCM-Admin account only has rights to create and deploy packages to the US OU and no where else? I added US-SCCM-Admin security group from AD to the "Administrative Users" group in SCCM. But now I need
to configure a role for this group but I am not sure which one to copy or import? I tried copying the "Application Deployment Manager" role and renaming it appropriately but when I login to SCCM as this user, they dont have the option to create or
deploy packages? Does anyone have a simple step by step on this or explanation on what to do to delegate package creation and deployment based on the user in an AD group? TIAThe Application Deployment Manager role is only allowed to deploy an already existing application. You would have to use the
Application Administrator role instead.
Torsten Meringer | http://www.mssccmfaq.de
Maybe you are looking for
-
Is it possible 2 use mini sd wificard??? thnks razr127
-
Sudden Change to Slide Show Display/Presenter View Greyed Out
Two weeks ago powerpoint was acting normally. I would come into class, hook my netbook up to the projector, set my monitor output option to extended desktop and start my slideshow in presenter view. This morning I went into class and I was unable to
-
Short question about upgrading
I have CS2 today and im about to upgrade to CS4. I have my original media left but ive lost my serial number. Am I still able to upgrade?
-
Maybe i am not asking this correctly
i manually manage my music, primarily because i don't want to have to sync my podcasts (i like to keep some of them on there forever). so when i click on a playlist and pick sync nothing happens. in the status bar at the top of itunes is says its syn
-
I am trying to update Mountain Lion to 10.8.2, but I get the error message: OS X Update can't be installed on this disk. This volume does not meet the requirements for this update. When trying to install on my hard drive?