Package run error

Dear Friends,
I am not able to run the Package successfully in BPC, because some dimensions are not mapped in BI to BPC which showing the error in BPC after run the package.
I am trying to pull the transactional data from BI to BPC and while mapping in infoprovider BI to BPC, I am not able to find all the dimensions which are created in BPC.
In the Application set I can map the dimensions which are not available in BI. Can anyone please guide me how to map such dimensions with BI.
Thanks in advance.
Regards,
MD.

Hi,
If you have some additional dimensions in BPC, which are not in BI, then you can use *NEWCOL statement in the transformation file, something like:
dimname = *NEWCOL(ABC)
ABC is a valid member of the dimname dimension.
Hope this helps.

Similar Messages

SSIS 2012 package runs under SSDT but fails with permission error from SSMS

I have a simple package that pulls data from a text file located on a Windows file server that runs successfully from SSDT on my client.
However, when deployed and running the package via SSMS from the client, the package fails with a permission error, with the error stating that the data file could not be opened.
I have done some investigation and have seen some info that states that a package run from SSMS runs under the account on which you are logged on to the machine, which I would have thought is correct. This is therefore the same account when running from
SSDT (which works) and I can see from the SSIS Report that the 'Caller' is stated as my account, so if this is the case why isin't the package working.
I've also seen an MSDN forum answer which stated the opposite that the package when run from the IS Catalog in SSMS doesn't run under the account on which the client is logged on with, which is the opposite of the above, but doesn't indicate which account
it is using.
So what account is being used to run SSIS 2012 packages from the IS catalog from within SSMS ?
If it is the account on which you are logged onto the client running SSMS, why is it not working when the account has the necessary permissions (as provent when running from SSDT) ?

I am aware it's using my account and not one of the service. There's nothing in the posts above which suggests I'm using the service account. I don't know why people keep assuming that I'm running the package from a job. I've never stated that in any of
the posts I'm running the package from a job. It's been made quite clear I'm running the package from the IS Catalog on SSMS:
"This is simply selecting a package from the IS Catalog, right-clicking and selecting Execute package.", as per the Nov 18 post, and in the original post "....So what account is being used to run SSIS 2012 packages from the IS catalog from
within SSMS".
Just to be clear, the package is NOT being run from a job. It's using the Execute package option when selecting the package within SSMS from the IS Catalog and it's running under the account on which I am logged on to my client.
Please read carefully. I was just answering your question "So what account is being used to run SSIS 2012 packages from the IS catalog from within SSMS ?" and stating that you where right and that it uses your account to run the package
when you execute a package manually from the Catalog and that you can prove that by logging the system variable.
A good suggestion about using a share in the task to map the drive and I will try this. I would find it strange that SSMS requires this mapping whereas SSDT does not though.
Ok let us know your findings. If it doesn't work you can also test it with a password and username:
net use f: \\financial\public yourpassword /user:username
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

Failed to load Execute Package Task error.

Hello Experts,
Excuse my newbie question.
Execute Package Task: Error: The task has failed to load. The contact information for the task is "Microsoft Corporation; Microsoft SQL Server; Microsoft corporation; All Rights Reserved http://www.microsoft.com/sql/support/default.asp:1"
We have a windows service running on our app server that deploys a package that executes other packages using execute package task. This package and rest of the packages are in the same folder at the same level under integration services
catalog. The package fails to execute with the above said error.
Execute package task is configured to run in 'in-process' mode. Changing delay validation to true/false in child packages didn't help.
ironically if the package is deployed using a console application from the app server the package gets executed just fine. I checked permissions, everything seem fine.
Is there anyway to get details of this error to understand the problem better? I am looking at reports > standard reports > all executions.
Thanks.

As it turns out, the 63bit ExecPackageTask.dll was not found under "C:\Program Files\Microsoft SQL Server\110\DTS\Binn". Installing "SQL Server Data Tools" installed only 32 bit version of the component under "C:\Program Files (x86)\Microsoft SQL
Server\110\DTS\Binn".
Is there a way to get 64bit version of this component without installing "Integration Services" (to avoid possible license issues)?
Hi Jayakarthiks,
To make use of the 64-bit ExecPackageTask.dll, you also need the 64-bit SSIS runtime and 64-bit DTExec utility tool. To obtain the 64-bit SSIS runtime and tools, you have to install the SQL Server Integration Services service from your SQL Server 2012 install
media.
Reference:
http://msdn.microsoft.com/en-us/library/ms143731.aspx
Regards,
Mike Yin
If you have any feedback on our support, please click here
Mike Yin
TechNet Community Support

Package-query: error while loading shared libraries: libcurl.so.4: can

Hi all
when i run yaourt to install any things :
package-query: error while loading shared libraries: libcurl.so.4: cannot open shared object file: No such file or directory
why?
what can i do?
I'm very newbie so help me with easy commands!
thanks

try to reinstall yahourt :
https://wiki.archlinux.org/index.php/Yaourt

Package Validation Error - SSIS Error Code DTS_E_OLEDBERROR - Error code: 0x80040E4D

I sometimes get the following error randomly -
Package Validation Error
ADDITIONAL INFORMATION:
Error at MY_PACKAGE_PLUS[Connection manager "MY_DATABASE"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80040E4D Description: "Login failed for user 'USERNAMEZ'.".
Error at MY_PACKAGE_PLUS [Log provider "SSIS log provider for SQL Server"]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "MY_DATABASE" failed with error
code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
(Microsoft.DataTransformationServices.VsIntegration)
My package name in SSIS/BIDS is MY_PACKAGE, but in the error I see MY_PACKAGE_PLUS, which was the name of an older version of the package. This error goes away when I close SSIS and then restart it. I wonder why this happens and how do I fix it
? Is this some bug in SSIS ? The same package runs without errors in SQL server agent.
Thanks.

It seems the old package reference still exists in your project bin folder or inside stproj file. WHich is why it tries to validate the older package each time when you start the project.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Problem in package run inside stored procedure

i have ssis package to import data from excel to database.
package is running correctly inside BIDS.
but when i run package under stored procedure it is giving error :
Error:   Code: 0xC0014023
   Source: loop sheets in excel
   Description: The GetEnumerator method of the ForEach Enumerator has failed with error 0x80040E21 "(null)". This occurs when the ForEach Enumerator cannot enumerate.

Hi BI_DEV_19,
Does the package connects with network resources? If so, try set the job step to run under a proxy account that is created based on a domain account. In BIDS, the package runs under the Windows account that you log onto the operating system.
The error message “The GetEnumerator method of the ForEach Enumerator has failed with error 0x80040E21” may occur because the ADODB.dll file is corrupted or missing. You can check whether the ADODB.dll exists in the following folder:
C:\program files (x86)\Microsoft.NET\Primary Interop Assemblies
In this situation, you can back up the existing ADODB.dll file, and copy one from another machine to this server.
Regards,
Mike Yin
TechNet Community Support

Currency Translation- Package Status error

I am encountering the following error after running the currency translation package.
The following is the error message in the package log
RUN LOGIC : Run program error,Message Number : ''''
Failed
Application:Sales Package Status :ERROR
Can some one please tell me what does this error mean and how it can be resolved

HI,
This error has been discussed in many threads here in this forum.
Refer these and see if u can get a solution:
Re: Currency conversion issue.
Re: Currency Conversion Problem
Regards
Navin

AIR 15.0 for OSX - ADT: Packaging failed. Packager internal error

Packaging a SWF to AIR with captive runtime and native installer (using "-package bundle"), building on PC worked perfectly fine. After making all of the requisite changes to make it work for Mac, I'm now running into the "Packaging failed. Packager internal error" when building using adt through the command line. My .command script is as follows:
cd [directory]
adt -package -storetype pkcs12 -keystore ../cert/key.p12 -storepass pw -target bundle Bundle ../App.xml App.swf -extdir ../lib icons/16.png icons/32.png icons/128.png
What can cause this vague "Packger interal error" error? Any help would be appreciated. Thank you.

Steve
I have same problem with apple Developer Id Application certificate (downloaded from apple), got past the chain error message by including intermediate and root certificates when I exported from keychain, but got the package error referenced here. Also when I sign on windows machine with my code signing certificate (selecting windows installer) all publishes ok, but the certificate is not attached, says 'unknown developer' when I down load and try and run installer on windows machine. I sent the exe to Comodo (the guys I got the code signing certificate from) and they say the exe is not signed.
Finally I get 'The digital certificate is invalid' error when I try and use 'Developer Id Installer' certificate (downloaded from apple).
I think there must be several problems here with Air SDK.
Stopping me from publishing and I have a very upset Customer. Can someone from Adobe please advise asap.

Security package specific error occurred when trying to connect to Orchestrator with remote Runbook Designer

When I try to connect to Orchestrator server with Runbook Designer installed on my laptop I get an error saying "A security package specific error occurred.".
Entry from Designer log file is below. I've tried to set error level to 3 and 7 but got no additional info about the error. I'm unable to find any details of the error on server or client side in any logs (Event Log or Orchestrator trace logs).
Connecting to Orchestrator Management Server with local Designer installed on the server works fine.
Orchestrator is installed in AD environment and security groups are properly configured.
Can anybody help?
2012-06-12 11:35:51 [7472] 1 Exception caught in long __cdecl `anonymous-namespace'::connectCommunicator(struct HWND__ *,const class std::basic_string<wchar_t,struct std::char_traits<wchar_t>,class std::allocator<wchar_t> > &)
Connections.cpp(238):
<Exception>
<Type>Opalis::Exception</Type>
<Location>
void __thiscall ServiceCommunicator::connect(const class std::basic_string<wchar_t,struct std::char_traits<wchar_t>,class std::allocator<wchar_t> > &)
ServiceCommunicator.cpp(118)
</Location>
<MsgCode>A security package specific error occurred.
</MsgCode>
</Exception>

I'm having a similar issue with one of our runbook servers. i cannot deploy any IPs to it. I get the error "A security package specific error occurred". I can open the designer on the runbook server, connect to the management server, and look at
runbooks. They wont run on the server without the IPs though, but it doesnt seem like a connection issue. i have also tried uninstalling/re-installing the runbook server and i get the same.
Has anybody else run into this?
Edit:
Heres an error fromthe event log:
The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server <Service Account>. The target name used was HOST/server.domain.domain.com. This indicates that the target server failed to decrypt the ticket provided by the client. This can
occur when the target server principal name (SPN) is registered on an account other than the account the target service is using. Please ensure that the target SPN is registered on, and only registered on, the account used by the server. This error can also
happen when the target service is using a different password for the target service account than what the Kerberos Key Distribution Center (KDC) has for the target service account. Please ensure that the service on the server and the KDC are both updated to
use the current password. If the server name is not fully qualified, and the target domain (domain.domain.COM) is different from the client domain (domain.domain.COM), check if there are identically named server accounts in these two domains, or use the fully-qualified
name to identify the server.
So maybe I was just given the wrong account.
- Slow is smooth and smooth is fast.

Combined Update 10.8.3 installation failure JS: Package Authoring Error:

Hi there,
I'm trying to install the combined Update 10.8.3 from 10.8.2.
It doesn't show in the Softwarupdate, so i downloaded it from support.apple.com
Now i get a failure while Installing, or before installing.
Konsole log:
24.04.13 12:06:12,138 CoreServicesUIAgent[3438]: Error: qtn_file_apply_to_path error: Read-only file system
24.04.13 12:06:12,375 Installer[3474]: CoreAnimation: warning, deleted thread with uncommitted CATransaction; set CA_DEBUG_TRANSACTIONS=1 in environment to log backtraces.
24.04.13 12:06:14,355 Installer[3474]: CoreAnimation: warning, deleted thread with uncommitted CATransaction; set CA_DEBUG_TRANSACTIONS=1 in environment to log backtraces.
24.04.13 12:06:14,664 Installer[3474]: *** WARNING: -[NSImage compositeToPoint:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
24.04.13 12:06:14,664 Installer[3474]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
24.04.13 12:06:14,684 Installer[3474]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
24.04.13 12:06:14,684 Installer[3474]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
24.04.13 12:06:14,687 Installer[3474]: CoreAnimation: warning, deleted thread with uncommitted CATransaction; set CA_DEBUG_TRANSACTIONS=1 in environment to log backtraces.
24.04.13 12:06:27,707 SystemUIServer[132]: -[TCMNATPMPPortMapper_Combined refreshExternalIPInThread] NAT-PMP: IP refresh did fail: -7
Install log:
Apr 24 12:06:12 Kid-Mac.local Installer[3474]: @(#)PROGRAM:Install PROJECT:Install-735
Apr 24 12:06:12 Kid-Mac.local Installer[3474]: @(#)PROGRAM:Installer PROJECT:Installer-614
Apr 24 12:06:12 Kid-Mac.local Installer[3474]: Hardware: MacBookPro10,1 @ 2.30 GHz (x 8), 8192 MB RAM
Apr 24 12:06:12 Kid-Mac.local Installer[3474]: Running OS Build: Mac OS X 10.8.2 (12C3012)
Apr 24 12:06:12 Kid-Mac.local Installer[3474]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
Apr 24 12:06:12 Kid-Mac.local Installer[3474]: Env: TMPDIR=/var/folders/s_/kjdj96xj0y50zdqk_zrl0s5h0000gn/T/
Apr 24 12:06:12 Kid-Mac.local Installer[3474]: Env: SHELL=/bin/bash
Apr 24 12:06:12 Kid-Mac.local Installer[3474]: Env: HOME=/Users/KidNoob
Apr 24 12:06:12 Kid-Mac.local Installer[3474]: Env: USER=KidNoob
Apr 24 12:06:12 Kid-Mac.local Installer[3474]: Env: LOGNAME=KidNoob
Apr 24 12:06:12 Kid-Mac.local Installer[3474]: Env: SSH_AUTH_SOCK=/tmp/launch-6bZ1Un/Listeners
Apr 24 12:06:12 Kid-Mac.local Installer[3474]: Env: Apple_Ubiquity_Message=/tmp/launch-vrGAQ6/Apple_Ubiquity_Message
Apr 24 12:06:12 Kid-Mac.local Installer[3474]: Env: Apple_PubSub_Socket_Render=/tmp/launch-faovOF/Render
Apr 24 12:06:12 Kid-Mac.local Installer[3474]: Env: COMMAND_MODE=unix2003
Apr 24 12:06:12 Kid-Mac.local Installer[3474]: Env: __CF_USER_TEXT_ENCODING=0x1F5:0:3
Apr 24 12:06:12 Kid-Mac.local Installer[3474]: Kombiniertes OS X-Update Installation Log
Apr 24 12:06:12 Kid-Mac.local Installer[3474]: Opened from: /Volumes/OS X 10.8.3 Update Combo/OSXUpdCombo10.8.3.pkg
Apr 24 12:06:12 Kid-Mac.local Installer[3474]: Product archive /Volumes/OS X 10.8.3 Update Combo/OSXUpdCombo10.8.3.pkg trustLevel=501
Apr 24 12:06:12 Kid-Mac.local Installer[3474]: JS: Package Authoring Error: Exception thrown while running volume check. TypeError: 'null' is not an object (evaluating 'my.target.systemVersion.ProductVersion')
Found the solution with the ServerVersion.plist but there is nothing in my CoreServices folder.
Thx for Help.

Okay,
finally I reinstall Mountain Lion,
CMD+R, New Install!
The only thing, you have to Install the newest Java Version, thats it!

Xtra package download error 125

I am trying to get an xtra to download automatically in
shockwave but I get an "Xtra package download error 125" everytime
I try and run my published .dcr. The xtra is SequenceXtra 1.9. I
have the download packs on my server, I have added the xtra to my
xtrainfo.txt and I have added the xtra to my movie and set it to
download if needed in the modify->movie->xtras menu (it
checks my server for the download pack then and it seems to pick it
up okay). Is there anything else I need to do or has anyone seen
anything like this before?
Thanks,
DuncanJWitham

What URL is prompting the download, and which browser and OS combination are you running?

My toolbar is missing and there is a button where it used to be that says "Please re-install the Toolbar" but when I click on it nothing happens? Also when I start Firefox I get a script running error how do I solve these issues?

My toolbar is missing and there is a button at the top left that asks me to "Please re-install the Toolbar" but when I click on it nothing happens???
Then when I start Mozilla I get a long delay before it launches and a script running error "A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete.
Script: chrome://tavgp/content/libs/include.js:595"
How do I solve these issues???

No idea - and you provide no clues
what version of iPHoto do you have? Of the OS? is the iPhoto icon you are speaking of in the Dock?
re-read your post and try to provide information using standard Mac terms since we can not see you or your computer and only have your worrds to let us try to help you
Somehow my "IPhoto" icon now says "Preview". When I click on "Preview" nothing opens up except the bar says Preview. When I click on the Preview on the bar, a box opens up with different items, except when I click on any of them, there is nothing there. The only thing that work is the "quit preview". However, it is still there where my IPhoto icon should be. I can't get into my IPhoto. How do I get rid of this "Preview" and how did it end up taking over the IPhoto icon???
If you go to your Applications folder and double click on iPhoto what happen?
LN

I deleted my foxfire profile contents and now get firefox is already running error. reinstall did not help

I deleted the contents of my profile. Now i get the firefox is already running error. i realize that i screwed up. i have restarted, uninstalled, reinstalled, but still firefox will not load.

You can get that error if Firefox can not find the profile folder. For details on what to check see http://kb.mozillazine.org/Profile_in_use

Package Authoring Error

Hi
I may have come to the wrong Forum and if so my apologies but if there is some one who could let me know if i need be concerned of the following errors i have just noticed in Console after having done recent Java And Safari update today.both installations i believe were completed successfully but console is showing the following message.
13/03/2011 13:43:52 Software Update[133] Software Update Package Authoring Error: installation-check results requires a message
13/03/2011 13:38:58 Software Update[136] Software Update Package Authoring Error: <choices-outline ui='SoftwareUpdate'> should only have one <line> element. Put additional <line> elements in a <choices-outline ui='invisible'> element.
Thanks in advance
Cole

mach_kernel file missing in root of harddrive
replaced, now working again

HELP: Oracle VM Manager 3.1.1 VM Server Status Running (Error)

Hi All,
I have updated the latest patch of VM Manager 3.1.1. In my server pool, I have 3 VM servers.
All VM Server shows Status Running (Error). I don't care about the small red x icons displayed on the VM Manager but it stops all my operations:
1. Not able to Edit the virtual machine from one server.
OVMAPI_9013E Cannot perform operation on Virtual Machine: racnode1, no server available.
Wed Nov 07 14:29:32 PST 2012
2. Not able to Remove a VM Server from the Server pool
com.oracle.ovm.mgr.api.exception.RuleException: OVMRU_004004E: - Cannot delete server: vmsvr2.X.com, while it is in a server pool
Wed Nov 07 14:31:21 PST 2012
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:151)
at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:100)
at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:773)
at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:401)
at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:459)
at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
at java.lang.Thread.run(Thread.java:662)
Caused by: com.oracle.ovm.mgr.api.exception.RuleException: OVMRU_004004E: - Cannot delete server: vmsvr2.X.com, while it is in a server pool
Wed Nov 07 14:31:21 PST 2012
at com.oracle.ovm.mgr.rules.modules.api.physical.ServerRules.onPersistableCleanPre(ServerRules.java:249)
at com.oracle.ovm.mgr.api.job.JobEngine.invokeMethod(JobEngine.java:662)
at com.oracle.ovm.mgr.api.job.JobEngine.invokeMethod(JobEngine.java:631)
at com.oracle.ovm.mgr.rules.RulesEngine.runRules(RulesEngine.java:190)
at com.oracle.ovm.mgr.rules.RulesEngine.preProcess(RulesEngine.java:142)
at com.oracle.ovm.mgr.model.ModelEngine.preValidate(ModelEngine.java:547)
at com.oracle.ovm.mgr.model.ModelEngine.access$200(ModelEngine.java:65)
at com.oracle.ovm.mgr.model.ModelEngine$3.notify(ModelEngine.java:352)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:325)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:289)
at com.oracle.odof.core.storage.Transaction.invokeMethod(Transaction.java:826)
at com.oracle.odof.core.Exchange.invokeMethod(Exchange.java:245)
at com.oracle.odof.core.Exchange.invokeMethod(Exchange.java:219)
at com.oracle.ovm.mgr.api.job.JobEngine.invokeMethod(JobEngine.java:744)
at com.oracle.ovm.mgr.api.manager.ModelManagerDbImpl.deleteObject(ModelManagerDbImpl.java:868)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:329)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:289)
at com.oracle.odof.core.storage.Transaction.invokeMethod(Transaction.java:826)
at com.oracle.odof.core.Exchange.invokeMethod(Exchange.java:245)
at com.oracle.ovm.mgr.api.manager.ModelManagerProxy.deleteObject(Unknown Source)
at com.oracle.ovm.mgr.api.manager.OvmManagerImpl.deleteObjectInternal(OvmManagerImpl.java:386)
at com.oracle.ovm.mgr.api.manager.OvmManagerImpl.deleteObject(OvmManagerImpl.java:409)
at com.oracle.ovm.mgr.api.manager.OvmManagerImpl.deleteObject(OvmManagerImpl.java:391)
at com.oracle.ovm.mgr.api.system.FoundryDbImpl.deleteServer(FoundryDbImpl.java:1007)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:329)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:289)
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:136)
... 7 more
I can't help to complain. The VM Manager just have been so buggy. Can't anyone help!
Edited by: 969880 on Nov 7, 2012 2:33 PM
Edited by: 969880 on Nov 7, 2012 2:34 PM

I used to see this message in my Oracle VM.
Your all questions are the same root cause is cause from your VM Servers are not available. If you want edit or remove virtual machine is need your VM Servers are available. If you want to remove Server Pool is need all VM Server are removed from it first and also cannot deleted VM Servers too.
What you have to do first is make all VM Servers up and available.
Option1. You can try to restart VM Serer agent (ovs-agent) and Oracle VM Manager service (ovmm) and try to log out and log in.
Option2. Restore Oracle VM from backup with option --UUID of previous VM Manager.
Thanks and regards,
Vandy

Package run error

Similar Messages

Maybe you are looking for