Pacman cannot find i3-wm [Solved]

Hello...
several weeks ago i installed archlinux and few days ago i update the pacman database and upgrade the whole system. At that time i only had basic archlinux install with no x-server. Today i wanted to try i3 window manager, but when i try to install it, pacman couldn'f find i3-wm package, the other packages were already downloaded by pacman, the only one that missing is i3-wm. Could anyone help me? I also try to install i3 using makepkg, but then pacman couldn't find python2-2.7something which is needed to build i3.
Last edited by ws212 (2012-12-14 14:58:11)

Probably it wasn't i3-wm that was missing, but a particular version of i3-wm that pacman expected to find.
IOW, you probably need to sync your databases (pacman -Sy).

Similar Messages

Pacman cannot find database on repos

Ok, I have no clue what I have done...When I run pacman -Syu here is what I get:
[root@Kolob ~]# pacman -Syu
:: Synchronizing package databases...
error: failed retrieving file 'core.db.tar.gz' from archlinux.unixheads.org : Not Found
error: failed to update core (Not Found)
error: failed retrieving file 'extra.db.tar.gz' from archlinux.unixheads.org : Not Found
error: failed to update extra (Not Found)
error: failed retrieving file 'community.db.tar.gz' from archlinux.unixheads.org : Not Found
error: failed to update community (Not Found)
error: failed to synchronize any databases
I don't really know what to do at this point. Here is my pacman config:
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl %u > %o
#CleanMethod = KeepInstalled
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[testing]
## Add your preferred servers here, they will be used first
#Include = /etc/pacman.d/mirrorlist
[core]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[extra]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
#[community-testing]
## Add your preferred servers here, they will be used first
#Include = /etc/pacman.d/mirrorlist
[community]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
And my /etc/pacman.d/mirrorlist:
# Arch Linux repository mirrorlist
# Generated on 2009-06-16
# United States
#Server = http://mirror.archlinux.com.ve/$repo/os/@carch@
Server = http://archlinux.unixheads.org/$repo/os/@carch@
#Server = ftp://mirror.cs.vt.edu/pub/ArchLinux/$repo/os/@carch@
#Server = http://mirror.cs.vt.edu/pub/ArchLinux/$repo/os/@carch@
#Server = ftp://mirrors.easynews.com/linux/archlinux/$repo/os/@carch@
#Server = http://mirrors.easynews.com/linux/archlinux/$repo/os/@carch@
Perhaps some other useful info:
-i686
-GNOME
-pacman 3.3.2

It seems as if you have only one mirror enabled in your mirrorlist file. Can you try to enable more mirrors. pacman will try them in the order they appear in the file. Also, I have made good experience with ftp mirrors.
What you also could do is try the rankmirrors script. It will sort your mirrors according to speed. See Beginners Guide.

[SOLVED] cannot find root device after pacman -Syu

Today I had a problem after pacman -Syu. Of course, my problem stemmed from not paying attention to the following (from https://bbs.archlinux.org/viewtopic.php?id=57205):
<b>Read pacman's output while upgrading.</b>
I could no longer boot. I received a message "cannot find root device" or something similar indicating a device with the appropriate UUID had not been found and I was being dropped into a recovery shell, then, when I typed exit, an emergency shell, followed shortly by a freeze.
After some investigation it appeared my initramfs was broken/non-existent/something after the install. I booted into a live CD and found that updating pacman again, and mkinitcpio -p linux both displayed the following error: "Failed to create temporary working directory in /tmp". Long story short: mktemp was segfaulting. This should be extremely easy to check if you're having a similar problem. I replaced it with the version on the live CD and ran the pacman update again. Success. If you do this, you may need to make sure your live cd architecture and installed kernel architecture are the same.
I'm not sure of the etiquette here, so I'm posting this in case someone else has the same problem I did; and benefits from a similar solution. I have checked the etiquette post and I don't think it's clear whether it's kosher to post things that don't actually require a solution. However, if I have misinterpreted the rules/etiquette and/or this type of post is considered extraneous please remove it.

You have to use lvm first. As all those vg*, lv*, and pv* commands are actually links to the lvm command, you should have to do something like "lvm vgscan" instead of just "vgscan".
Edit: oh and at that point in the boot process, you are actually in the initramfs still (ash to be specific).
Edit2: I was having issues with a USB keyboard and a new machine (actually just a new bios), and found out that because of windows 8's requriement for a fast POST, the default is to turn off the scanning for usb devices. Though this was for UEFI, and I am not sure if the same would apply for a bios booting machine...
Last edited by WonderWoofy (2013-03-26 23:10:40)

[SOLVED] Cannot compile wallet, cannot find boost

Hello,
When I'm trying to compile piggybank to store my CENT cryptocurrency, I get this error when compiling:
robin-desktop% make
cd /home/robin/Downloads/pennies-master; /bin/sh share/genbuild.sh /home/robin/Downloads/pennies-master/build/build.h
fatal: Not a git repository (or any parent up to mount point /home)
Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).
/usr/lib/qt4/bin/rcc -name bitcoin src/qt/bitcoin.qrc -o qrc_bitcoin.cpp
g++ -c -pipe -fstack-protector-all --param ssp-buffer-size=1 -msse2 -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_REENTRANT -fdiagnostics-show-option -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -Wstack-protector -DQT_GUI -DBOOST_THREAD_USE_LIB -DBOOST_SPIRIT_THREADSAFE -DSCRYPT_CHACHA -DSCRYPT_KECCAK512 -DBOOST_THREAD_PROVIDES_GENERIC_SHARED_MUTEX_ON_WIN -D__NO_SYSTEM_INCLUDES -DUSE_UPNP=1 -DSTATICLIB -DUSE_IPV6=1 -DHAVE_BUILD_INFO -DLINUX -DQT_NO_DEBUG -DQT_GUI_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/share/qt4/mkspecs/linux-g++ -I/usr/include/qt4/QtCore -I/usr/include/qt4/QtGui -I/usr/include/qt4 -Isrc -Isrc/json -Isrc/qt -Ic:/deps -IC:/deps/boost -Ic:/deps/db/build_unix -Ic:/deps/ssl/include -Ibuild -Ibuild -o build/qrc_bitcoin.o qrc_bitcoin.cpp
g++ -Wl,-O1,--sort-common,--as-needed,-z,relro -fstack-protector-all --param ssp-buffer-size=1 -Wl,-O1 -o piggybank build/bitcoin.o build/bitcoingui.o build/transactiontablemodel.o build/addresstablemodel.o build/optionsdialog.o build/sendcoinsdialog.o build/coincontroldialog.o build/coincontroltreewidget.o build/addressbookpage.o build/signverifymessagedialog.o build/aboutdialog.o build/editaddressdialog.o build/bitcoinaddressvalidator.o build/alert.o build/version.o build/sync.o build/util.o build/netbase.o build/key.o build/script.o build/main.o build/init.o build/net.o build/irc.o build/checkpoints.o build/addrman.o build/db.o build/walletdb.o build/clientmodel.o build/guiutil.o build/transactionrecord.o build/optionsmodel.o build/monitoreddatamapper.o build/transactiondesc.o build/transactiondescdialog.o build/bitcoinstrings.o build/bitcoinamountfield.o build/wallet.o build/keystore.o build/transactionfilterproxy.o build/transactionview.o build/walletmodel.o build/bitcoinrpc.o build/rpcdump.o build/rpcnet.o build/rpcmining.o build/rpcwallet.o build/rpcblockchain.o build/rpcrawtransaction.o build/overviewpage.o build/csvmodelwriter.o build/crypter.o build/sendcoinsentry.o build/qvalidatedlineedit.o build/bitcoinunits.o build/qvaluecombobox.o build/askpassphrasedialog.o build/protocol.o build/notificator.o build/qtipcserver.o build/rpcconsole.o build/noui.o build/kernel.o build/scrypt-x86.o build/scrypt-x86_64.o build/scrypt_mine.o build/pbkdf2.o build/scrypt-jane.o build/moc_bitcoingui.o build/moc_transactiontablemodel.o build/moc_addresstablemodel.o build/moc_optionsdialog.o build/moc_sendcoinsdialog.o build/moc_coincontroldialog.o build/moc_coincontroltreewidget.o build/moc_addressbookpage.o build/moc_signverifymessagedialog.o build/moc_aboutdialog.o build/moc_editaddressdialog.o build/moc_bitcoinaddressvalidator.o build/moc_clientmodel.o build/moc_guiutil.o build/moc_optionsmodel.o build/moc_monitoreddatamapper.o build/moc_transactiondesc.o build/moc_transactiondescdialog.o build/moc_bitcoinamountfield.o build/moc_transactionfilterproxy.o build/moc_transactionview.o build/moc_walletmodel.o build/moc_overviewpage.o build/moc_csvmodelwriter.o build/moc_sendcoinsentry.o build/moc_qvalidatedlineedit.o build/moc_qvaluecombobox.o build/moc_askpassphrasedialog.o build/moc_notificator.o build/moc_rpcconsole.o build/qrc_bitcoin.o -L/usr/lib -Lc:/deps/miniupnpc -lminiupnpc -lrt -LC:/deps/boost/stage/lib -Lc:/deps/db/build_unix -Lc:/deps/ssl -lssl -lcrypto -ldb_cxx -lboost_system-mgw46-mt-sd-1_53 -lboost_filesystem-mgw46-mt-sd-1_53 -lboost_program_options-mgw46-mt-sd-1_53 -lboost_thread-mgw46-mt-sd-1_53 -lpthread -lQtGui -lQtCore
/usr/bin/ld: cannot find -lboost_system-mgw46-mt-sd-1_53
/usr/bin/ld: cannot find -lboost_filesystem-mgw46-mt-sd-1_53
/usr/bin/ld: cannot find -lboost_program_options-mgw46-mt-sd-1_53
/usr/bin/ld: cannot find -lboost_thread-mgw46-mt-sd-1_53
collect2: error: ld returned 1 exit status
Makefile:298: recipe for target 'piggybank' failed
make: *** [piggybank] Error 1
I generate the makefile by running qmake-qt4 in the main directory. I already tried to downgrade Boost to version 1_54, but I don't have an older version and I think it should compile fine with a newer version without any problems. Anyone who has similar problems?
When I run pacman -Ss boost-libs I get:
extra/boost-libs 1.55.0-4 [installed]
Free peer-reviewed portable C++ source libraries - Runtime
Seems like nothing out of the ordinary. I'm getting the exact same errors when compiling Foxcoin. I also tried to install Qt again, but that didn't help.
Thanks for helping in advance.
Last edited by robin007bond (2014-06-17 06:18:53)

Neburski wrote:
robin007bond wrote:Can you tell me which keywords you used?
First I looked for one of the boost libraries that the program was looking for (e.g. the error for "cannot find -lboost_system-mgw46-mt-sd-1_53" means ld is looking for libboost_system-mgw46-mt-sd-1_53). I did it because the library name looked rather non-standard.
locate boost_system
After that I knew that the program you used was relying on a very particular boost library and that lead me to actually google for "boost_system-mgw46-mt-sd-1_53" to see what that would turn up and the second link is the one I posted in this forum.
Anyway if you know something about Makefiles then you could have solved it by yourself rather easy as well.
If you look in the Makefile you should find a line somewhere that has
LIBS += -lboost_system-mgw46-mt-sd-1_53 -lboost_filesystem-mgw46-mt-sd-1_53 -lboost_program_options-mgw46-mt-sd-1_53 -lboost_thread-mgw46-mt-sd-1_53
Essentially you can see from the output of "make that" it's looking for those files (look towards the end of the second "g++ -Wl,-O1 ..." line)
g++ -Wl,-O1,--sort-common ....... -Lc:/deps/ssl -lssl -lcrypto -ldb_cxx -lboost_system-mgw46-mt-sd-1_53 -lboost_filesystem-mgw46-mt-sd-1_53 -lboost_program_options-mgw46-mt-sd-1_53 -lboost_thread-mgw46-mt-sd-1_53 -lpthread -lQtGui -lQtCore
My first idea was immediately to have it link against the standard boost libraries by making the proposed changes, but I wanted to first check it on google. I can't tell you if it will make the software run correctly though.
Hmm, I know some C++ basics but I use an IDE most of the time. Making makefiles was never needed so I never bothered with them. Thanks for elaborating! The solution you found worked.
Last edited by robin007bond (2014-01-21 18:02:24)

My iPad shows a message "Cannot find AirPrint printer". I used to use my iPad to print materials using HP wireless printer D110. Now it does not want to print. Is this because I am now using IOS 7? What should I do to solve the problem? Help please.

My iPad shows a message "Cannot find AirPrint printer". I used to use my iPad to print materials using HP wireless printer D110. Now it does not want to print. Is this because I am now using IOS 7? What should I do to solve the problem? Help please.

Restart your WiFi router and printer by removing power for 30 seconds.

HT6437 My itunes cannot locate my ipod. All the sync option are grayed out and diagnostics says that itunes cannot find usb ports and that no device is connected when it is. What should I do to solve this issue?

So itunes is giving me problems. Since around Christmas time, itunes decided to stop reading my ipod. I connect it to my computer with the usb cable and my computer will recognize that a device is connected but itunes will not. If I go to file->devices and try to sync, all of my sync options are grayed out, while before it would just automatically sync.
When I run diagnostics it tells me that under ports that it cannot find usb ports (it has a green circle?), a type of cable isn't found, and that no device is connected with the usb cable (which my ipod is). I have been trying to fix this issue but nothing is working. I've tried restarting my ipod, itunes, and my computer, i've also tried resetting my ipod and uninstalling itunes then reinstalling itunes but nothing seems to be working.
Does anyone know how to solve this issue?

Do the USB ports work for other devices?
Does the iPod charge?
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

Spotlight and finder cannot find files as of a certain date. What can be the problem and how to solve?

Spotlight and search field in Outlook on MacBoon cannot find files as of a certain date. What can be the problem and how to solve?

Reinstall on both.
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it isthree times faster than wireless.
Restore your iPhone to reinstall iOS. Be sure to do this while connected to your computer and iTunes.
     Tap Settings > General > Reset > Erase all content and settings.

Itunes only recognises various artists instead of th dj who mixed the cd and therefore cannot find the artwork. Is there any way to solve this problem?

itunes only recognises various artists and not the dj who mixed cd, and therefore cannot find the artwork as a result. Is there anyway to solve this as I have quite a few cd's with the same title in this series?

I'm happy to report that Sound Studio has corrected its part of the problem, and an updated version is available on its web site: freeverse.com/soundstudio/
I also discovered that attempts to adjust individual song volumes in the Get Info menu won't work if the Sound Check option is selected in Preferences (duh!).
Further good news is Apple's announcement of an arrangement to offer unprotected versions of BMI music in the iTunes store for an extra 30 cents per song. It would be well worth it, in my opinion, if all the music companies agreed to the arrangement, thereby streamlining the task of transferring problem songs to editing programs like Sound Studio.
One minor glitch remains. To differentiate between original and edited versions of a song, I usually append a number to the name. But when I import the edited version back into the iTunes library, iTunes automatically changes the name back to the original. I can tell the difference by referring to other clues in the library file, but not in the abbreviated iPod menu. I could delete the unedited version from the library or, better, create playlistys consisting of only the edited versions.
Thanks to all who contributed to this discussion. I hope others benefit from it as I did.
P.S.: I did download Max, which works fine for its intended purposes.

[SOLVED] Installing on ZFS root: "ZFS: cannot find bootfs" on boot.

I have been experimenting with ZFS filesystems on external HDDs for some time now to get more comfortable with using ZFS in the hopes of one day reinstalling my system on a ZFS root.
Today, I tried installing a system on an USB external HDD, as my first attempt to install on ZFS (I wanted to try in a safe, disposable environment before I try this on my main system).
My partition configuration (from gdisk):
Command (? for help): p
Disk /dev/sdb: 3907024896 sectors, 1.8 TiB
Logical sector size: 512 bytes
Disk identifier (GUID): 2FAE5B61-CCEF-4E1E-A81F-97C8406A07BB
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 3907024862
Partitions will be aligned on 8-sector boundaries
Total free space is 0 sectors (0 bytes)
Number Start (sector) End (sector) Size Code Name
1 34 2047 1007.0 KiB EF02 BIOS boot partition
2 2048 264191 128.0 MiB 8300 Linux filesystem
3 264192 3902828543 1.8 TiB BF00 Solaris root
4 3902828544 3907024862 2.0 GiB 8300 Linux filesystem
Partition #1 is for grub, obviously. Partition #2 is an ext2 partition that I mount on /boot in the new system. Partition #3 is where I make my ZFS pool.
Partition #4 is an ext4 filesystem containing another minimal Arch system for recovery and setup purposes. GRUB is installed on the other system on partition #4, not in the new ZFS system.
I let grub-mkconfig generate a config file from the system on partition #4 to boot that. Then, I manually edited the generated grub.cfg file to add this menu entry for my ZFS system:
menuentry 'ZFS BOOT' --class arch --class gnu-linux --class gnu --class os {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
echo 'Loading Linux core repo kernel ...'
linux /vmlinuz-linux zfs=bootfs zfs_force=1 rw quiet
echo 'Loading initial ramdisk ...'
initrd /initramfs-linux.img
My ZFS configuration:
# zpool list
NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT
External2TB 1.81T 6.06G 1.81T 0% 1.00x ONLINE -
# zpool status :(
pool: External2TB
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
External2TB ONLINE 0 0 0
usb-WD_Elements_1048_575836314135334C32383131-0:0-part3 ONLINE 0 0 0
errors: No known data errors
# zpool get bootfs
NAME PROPERTY VALUE SOURCE
External2TB bootfs External2TB/ArchSystemMain local
# zfs list
NAME USED AVAIL REFER MOUNTPOINT
External2TB 14.6G 1.77T 30K none
External2TB/ArchSystemMain 293M 1.77T 293M /
External2TB/PacmanCache 5.77G 1.77T 5.77G /var/cache/pacman/pkg
External2TB/Swap 8.50G 1.78T 20K -
The reason for the above configuration is that after I get this system to work, I want to install a second system in the same zpool on a different dataset, and have them share a pacman cache.
GRUB "boots" successfully, in that it loads the kernel and the initramfs as expected from the 2nd GPT partition. The problem is that the kernel does not load the ZFS:
ERROR: device '' not found. Skipping fsck.
ZFS: Cannot find bootfs.
ERROR: Failed to mount the real root device.
Bailing out, you are on your own. Good luck.
and I am left in busybox in the initramfs.
What am I doing wrong?
Also, here is my /etc/fstab in the new system:
# External2TB/ArchSystemMain
#External2TB/ArchSystemMain / zfs rw,relatime,xattr 0 0
# External2TB/PacmanCache
#External2TB/PacmanCache /var/cache/pacman/pkg zfs rw,relatime,xattr 0 0
UUID=8b7639e2-c858-4ff6-b1d4-7db9a393578f /boot ext4 rw,relatime 0 2
UUID=7a37363e-9adf-4b4c-adfc-621402456c55 none swap defaults 0 0
I also tried to boot using "zfs=External2TB/ArchSystemMain" in the kernel options, since that was the more logical way to approach my intention of having multiple systems on different datasets. It would allow me to simply create separate grub menu entries for each, with different boot datasets in the kernel parameters. I also tried setting the mount points to "legacy" and uncommenting the zfs entries in my fstab above. That didn't work either and produced the same results, and that was why I decided to try to use "bootfs" (and maybe have a script for switching between the systems by changing the ZFS bootfs and mountpoints before reboot, reusing the same grub menuentry).
Thanks in advance for any help.
Last edited by tajjada (2013-12-30 20:03:09)

Sounds like a zpool.cache issue. I'm guessing your zpool.cache inside your arch-chroot is not up to date. So on boot the ZFS hook cannot find the bootfs. At least, that's what I assume the issue is, because of this line:
ERROR: device '' not found. Skipping fsck.
If your zpool.cache was populated, it would spit out something other than an empty string.
Some assumptions:
- You're using the ZFS packages provided by demizer (repository or AUR).
- You're using the Arch Live ISO or some version of it.
On cursory glance your configuration looks good. But verify anyway. Here are the steps you should follow to make sure your zpool.cache is correct and up to date:
Outside arch-chroot:
- Import pools (not using '-R') and verify the mountpoints.
- Make a copy of the /etc/zfs/zpool.cache before you export any pools. Again, make a copy of the /etc/zfs/zpool.cache before you export any pools. The reason for this is once you export a pool the /etc/zfs/zpool.cache gets updated and removes any reference to the exported pool. This is likely the cause of your issue, as you would have an empty zpool.cache.
- Import the pool containing your root filesystem using the '-R' flag, and mount /boot within.
- Make sure to copy your updated zpool.cache to your arch-chroot environment.
Inside arch-chroot:
- Make sure your bootloader is configured properly (i.e. read 'mkinitcpio -H zfs').
- Use the 'udev' hook and not the 'systemd' one in your mkinitcpio.conf. The zfs-utils package does not have a ported hook (as of 0.6.2_3.12.6-1).
- Update your initramfs.
Outside arch-chroot:
- Unmount filesystems.
- Export pools.
- Reboot.
Inside new system:
- Make sure to update the hostid then rebuild your initramfs. Then you can drop the 'zfs_force=1'.
Good luck. I enjoy root on ZFS myself. However, I wouldn't recommend swap on ZFS. Despite what the ZoL tracker says, I still ran into deadlocks on occasion (as of a month ago). However, I cannot say definitely the cause of the issue; but it resolved when I moved swap off ZFS to a dedicated partition.
Last edited by NVS (2013-12-29 14:56:44)

Error Message:"Cannot find or create the font 'WP-MathA'. Some characters may not display or print correctly." Who can help me solve this problem?

Some of the pdf files I work with (receive) come up with a comment: “Cannot find or create the font ‘WP-MathA’. Some characters may not display or print correctly.” Who can help me solve this problem?
Thank you in advance for your time.
Marlen

Hello Anubha,
I am having a similar problem on my machine. I was using Word 2008 and I created a PDF inside Word.
I am opening the file on the system itself and I am running Windows 8.1. I am using Version 11 of Reader.
When the PDF I created (my resume) attempts to open, it says: cannot find or create the file Times, Bold. Some characters may not display or print correctly.
However, the entire Reader keeps freezing and will not allow me to open or test print the document. Also, it is not displaying any of the Bold Times New Roman Print. Can you please help? Thanks.

How to solve the Cannot find oraInventory problem in R12 installation.

I search many places to find this so, i decided to shared for hopl anyone else.
The note Rw-10003 During Rapidwiz Upgrade Install [ID 1266385.1] tell how to solved, crating the oraInst.loc file, but it miss something important, where I have to put it in the oraInst.loc file ? Fortunately, i have accses to others DB where look. You have to cretate the file in the /etc directory. Follows this steps.
1.- Go to the main directory where you gonna install the R12 app and create the follow directory
oraInventory
in my case was /u01/hab_r12/oraInventory
2.- Go to /etc and create a text file with the name OraInst.loc and put this lines
inventory_loc=/u01/hab_r12/oraInventory*
inst_group=dba**
*you must put the root directory of the installation
** the group who have the privilege in DB
3.- Re run the rapidinstall.
I hope this can help someone.
Cheers.

Hi;
In addition to Hussein Sawwan great post, Please refer:
R12 Insllation Fails With Error "Cannot Find Orainventory" [ID 1281649.1]
How to Create a Clean oraInventory in Release 12 [ID 834894.1]
How to find the location of GLOBAL Inventory and LOCAL inventory on R12.x ? Why Some Times, There are Issues With The oraInventory Registration During The Post Clone ? [ID 878717.1]
Regard

[SOLVED] gcc-4.6 cannot find -lgcc

I am trying to get the MSP430 development toolchain (gcc-msp430, msp430-libc, msp430-binutils, msp430mcu, mspdebug) installed in a fresh Arch Linux install.
For this I need gcc46, because gcc-msp430 doesn't build with GCC 4.8. I successfully built gcc46 from AUR using the PKGBUILD from here, but it cannot compile anything, not even a Hello World program:
/tmp $ gcc-4.6 -o hello hello.c
/usr/bin/ld: cannot find -lgcc
collect2: ld returned 1 exit status
I tried the PKGBUILDs from here, which are recommended in the AUR page for gcc-msp430, but still doesn't work.
What to do?
Last edited by Renan Birck (2013-11-05 20:23:42)

Renan Birck wrote:It works! Marking as solved. Thanks!
How did you compile gcc-msp430 ? I've tryed but it failed the ./configure of libgcc
make[2]: uscita dalla directory "/home/campo/System/Aur/gcc-msp430/src/build/gcc"
Checking multilib configuration for libgcc...
mkdir -p -- msp430/libgcc
Configuring in msp430/libgcc
configure: creating cache ./config.cache
checking for --enable-version-specific-runtime-libs... no
checking for a BSD-compatible install... /usr/bin/install -c
checking for gawk... gawk
checking build system type... i686-pc-linux-gnu
checking host system type... msp430-unknown-none
checking for msp430-ar... msp430-ar
checking for msp430-lipo... msp430-lipo
checking for msp430-nm... /home/campo/System/Aur/gcc-msp430/src/build/./gcc/nm
checking for msp430-ranlib... msp430-ranlib
checking for msp430-strip... msp430-strip
checking whether ln -s works... yes
checking for msp430-gcc... /home/campo/System/Aur/gcc-msp430/src/build/./gcc/xgcc -B/home/campo/System/Aur/gcc-msp430/src/build/./gcc/ -B/usr/msp430/bin/ -B/usr/msp430/lib/ -isystem /usr/msp430/include -isystem /usr/msp430/sys-include
checking for suffix of object files... configure: error: in `/home/campo/System/Aur/gcc-msp430/src/build/msp430/libgcc':
configure: error: cannot compute suffix of object files: cannot compile
See `config.log' for more details.
Makefile:12255: set di istruzioni per l'obiettivo "configure-target-libgcc" non riuscito
make[1]: *** [configure-target-libgcc] Errore 1
make[1]: uscita dalla directory "/home/campo/System/Aur/gcc-msp430/src/build"
Makefile:872: set di istruzioni per l'obiettivo "all" non riuscito
make: *** [all] Errore 2
==> ERRORE: Si è verificato un errore in build().
L'operazione sta per essere interrotta...
makepkg 454,81s user 23,85s system 93% cpu 8:34,53 total
I checked the config.log but I didn't find anything :
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by GNU C Runtime Library configure 1.0, which was
generated by GNU Autoconf 2.64. Invocation command line was
$ /home/campo/System/Aur/gcc-msp430/src/gcc-4.6.3/libgcc/configure --cache-file=./config.cache --enable-multilib --with-cross-host=i686-pc-linux-gnu --prefix=/usr --infodir=/usr/share/info --mandir=/usr/share/man --disable-libssp --disable-nls --with-gnu-as --with-gnu-ld --with-as=/usr/bin/msp430-as --with-ld=/usr/bin/msp430-ld --with-pkgversion=mspgcc_20120406 --enable-languages=c,c++,lto --program-transform-name=s&^&msp430-& --disable-option-checking --with-target-subdir=msp430 --build=i686-pc-linux-gnu --host=msp430 --target=msp430 --srcdir=/home/campo/System/Aur/gcc-msp430/src/gcc-4.6.3/libgcc
## Platform. ##
hostname = enterprise
uname -m = i686
uname -r = 3.12.0-1-ARCH
uname -s = Linux
uname -v = #1 SMP PREEMPT Wed Nov 6 09:22:18 CET 2013
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/bin
PATH: /opt/android-sdk/platform-tools
PATH: /opt/android-sdk/tools
PATH: /usr/local/xenon/bin
PATH: /usr/local/xenon/usr/bin
PATH: /usr/bin/vendor_perl
PATH: /usr/bin/core_perl
PATH: /usr/local/xenon/bin
PATH: /usr/local/xenon/usr/bin
PATH: /opt/android-sdk/tools
PATH: /platform-tools
## Core tests. ##
configure:1742: creating cache ./config.cache
configure:1903: checking for --enable-version-specific-runtime-libs
configure:1916: result: no
configure:1964: checking for a BSD-compatible install
configure:2032: result: /usr/bin/install -c
configure:2048: checking for gawk
configure:2075: result: gawk
configure:2095: checking build system type
configure:2109: result: i686-pc-linux-gnu
configure:2129: checking host system type
configure:2142: result: msp430-unknown-none
configure:2245: checking for msp430-ar
configure:2272: result: msp430-ar
configure:2337: checking for msp430-lipo
configure:2364: result: msp430-lipo
configure:2429: checking for msp430-nm
configure:2456: result: /home/campo/System/Aur/gcc-msp430/src/build/./gcc/nm
configure:2521: checking for msp430-ranlib
configure:2548: result: msp430-ranlib
configure:2613: checking for msp430-strip
configure:2640: result: msp430-strip
configure:2702: checking whether ln -s works
configure:2706: result: yes
configure:2723: checking for msp430-gcc
configure:2750: result: /home/campo/System/Aur/gcc-msp430/src/build/./gcc/xgcc -B/home/campo/System/Aur/gcc-msp430/src/build/./gcc/ -B/usr/msp430/bin/ -B/usr/msp430/lib/ -isystem /usr/msp430/include -isystem /usr/msp430/sys-include
configure:3019: checking for C compiler version
configure:3028: /home/campo/System/Aur/gcc-msp430/src/build/./gcc/xgcc -B/home/campo/System/Aur/gcc-msp430/src/build/./gcc/ -B/usr/msp430/bin/ -B/usr/msp430/lib/ -isystem /usr/msp430/include -isystem /usr/msp430/sys-include --version >&5
xgcc (mspgcc_20120406) 4.6.3 20120301 (mspgcc LTS 20120406 unpatched)
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3039: $? = 0
configure:3028: /home/campo/System/Aur/gcc-msp430/src/build/./gcc/xgcc -B/home/campo/System/Aur/gcc-msp430/src/build/./gcc/ -B/usr/msp430/bin/ -B/usr/msp430/lib/ -isystem /usr/msp430/include -isystem /usr/msp430/sys-include -v >&5
Reading specs from /home/campo/System/Aur/gcc-msp430/src/build/./gcc/specs
Reading specs from /usr/msp430/lib/msp430mcu.spec
COLLECT_GCC=/home/campo/System/Aur/gcc-msp430/src/build/./gcc/xgcc
COLLECT_LTO_WRAPPER=/home/campo/System/Aur/gcc-msp430/src/build/./gcc/lto-wrapper
Target: msp430
Configured with: /home/campo/System/Aur/gcc-msp430/src/gcc-4.6.3/configure CFLAGS_FOR_TARGET=-Os --prefix=/usr --infodir=/usr/share/info --mandir=/usr/share/man --disable-libssp --disable-nls --target=msp430 --enable-languages=c,c++ --with-gnu-as --with-gnu-ld --with-as=/usr/bin/msp430-as --with-ld=/usr/bin/msp430-ld --with-pkgversion=mspgcc_20120406
Thread model: single
gcc version 4.6.3 20120301 (mspgcc LTS 20120406 unpatched) (mspgcc_20120406)
configure:3039: $? = 0
configure:3028: /home/campo/System/Aur/gcc-msp430/src/build/./gcc/xgcc -B/home/campo/System/Aur/gcc-msp430/src/build/./gcc/ -B/usr/msp430/bin/ -B/usr/msp430/lib/ -isystem /usr/msp430/include -isystem /usr/msp430/sys-include -V >&5
xgcc: fatal error: no input files
compilation terminated.
configure:3039: $? = 1
configure:3028: /home/campo/System/Aur/gcc-msp430/src/build/./gcc/xgcc -B/home/campo/System/Aur/gcc-msp430/src/build/./gcc/ -B/usr/msp430/bin/ -B/usr/msp430/lib/ -isystem /usr/msp430/include -isystem /usr/msp430/sys-include -qversion >&5
xgcc: fatal error: no input files
compilation terminated.
configure:3039: $? = 1
configure:3055: /home/campo/System/Aur/gcc-msp430/src/build/./gcc/xgcc -B/home/campo/System/Aur/gcc-msp430/src/build/./gcc/ -B/usr/msp430/bin/ -B/usr/msp430/lib/ -isystem /usr/msp430/include -isystem /usr/msp430/sys-include -o conftest -Os conftest.c >&5
Known MCU names:
msp1
msp2
msp430x110
msp430x112
msp430x1101
msp430x1111
msp430x1121
msp430x1122
msp430x1132
msp430x122
msp430x123
msp430x1222
msp430x1232
msp430x133
msp430x135
msp430x1331
msp430x1351
msp430x147
msp430x148
msp430x149
msp430x155
msp430x156
msp430x157
msp430x167
msp430x168
msp430x169
msp430x1610
msp430x1611
msp430x1612
msp430x2101
msp430x2111
msp430x2121
msp430x2131
msp430x311
msp430x312
msp430x313
msp430x314
msp430x315
msp430x323
msp430x325
msp430x336
msp430x337
msp430x412
msp430x413
msp430x415
msp430x417
msp430xE423
msp430xE425
msp430xE427
msp430xW423
msp430xW425
msp430xW427
msp430xG437
msp430xG438
msp430xG439
msp430x435
msp430x436
msp430x437
msp430x447
msp430x448
msp430x449
Assembler messages:
Fatal error: unknown MCU: cpu=430
configure:3058: $? = 1
configure:3246: checking for suffix of object files
configure:3268: /home/campo/System/Aur/gcc-msp430/src/build/./gcc/xgcc -B/home/campo/System/Aur/gcc-msp430/src/build/./gcc/ -B/usr/msp430/bin/ -B/usr/msp430/lib/ -isystem /usr/msp430/include -isystem /usr/msp430/sys-include -c -Os conftest.c >&5
Known MCU names:
msp1
msp2
msp430x110
msp430x112
msp430x1101
msp430x1111
msp430x1121
msp430x1122
msp430x1132
msp430x122
msp430x123
msp430x1222
msp430x1232
msp430x133
msp430x135
msp430x1331
msp430x1351
msp430x147
msp430x148
msp430x149
msp430x155
msp430x156
msp430x157
msp430x167
msp430x168
msp430x169
msp430x1610
msp430x1611
msp430x1612
msp430x2101
msp430x2111
msp430x2121
msp430x2131
msp430x311
msp430x312
msp430x313
msp430x314
msp430x315
msp430x323
msp430x325
msp430x336
msp430x337
msp430x412
msp430x413
msp430x415
msp430x417
msp430xE423
msp430xE425
msp430xE427
msp430xW423
msp430xW425
msp430xW427
msp430xG437
msp430xG438
msp430xG439
msp430x435
msp430x436
msp430x437
msp430x447
msp430x448
msp430x449
Assembler messages:
Fatal error: unknown MCU: cpu=430
configure:3272: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "GNU C Runtime Library"
| #define PACKAGE_TARNAME "libgcc"
| #define PACKAGE_VERSION "1.0"
| #define PACKAGE_STRING "GNU C Runtime Library 1.0"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL "http://www.gnu.org/software/libgcc/"
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| ;
| return 0;
| }
configure:3286: error: in `/home/campo/System/Aur/gcc-msp430/src/build/msp430/libgcc':
configure:3289: error: cannot compute suffix of object files: cannot compile
See `config.log' for more details.
## Cache variables. ##
ac_cv_build=i686-pc-linux-gnu
ac_cv_env_CC_set=set
ac_cv_env_CC_value='/home/campo/System/Aur/gcc-msp430/src/build/./gcc/xgcc -B/home/campo/System/Aur/gcc-msp430/src/build/./gcc/ -B/usr/msp430/bin/ -B/usr/msp430/lib/ -isystem /usr/msp430/include -isystem /usr/msp430/sys-include '
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value=-Os
ac_cv_env_CPPFLAGS_set=set
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value=
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_build_alias_set=set
ac_cv_env_build_alias_value=i686-pc-linux-gnu
ac_cv_env_host_alias_set=set
ac_cv_env_host_alias_value=msp430
ac_cv_env_target_alias_set=set
ac_cv_env_target_alias_value=msp430
ac_cv_host=msp430-unknown-none
ac_cv_prog_AR=msp430-ar
ac_cv_prog_AWK=gawk
ac_cv_prog_CC='/home/campo/System/Aur/gcc-msp430/src/build/./gcc/xgcc -B/home/campo/System/Aur/gcc-msp430/src/build/./gcc/ -B/usr/msp430/bin/ -B/usr/msp430/lib/ -isystem /usr/msp430/include -isystem /usr/msp430/sys-include '
ac_cv_prog_LIPO=msp430-lipo
ac_cv_prog_NM=/home/campo/System/Aur/gcc-msp430/src/build/./gcc/nm
ac_cv_prog_RANLIB=msp430-ranlib
ac_cv_prog_STRIP=msp430-strip
## Output variables. ##
AR='msp430-ar'
AWK='gawk'
CC='/home/campo/System/Aur/gcc-msp430/src/build/./gcc/xgcc -B/home/campo/System/Aur/gcc-msp430/src/build/./gcc/ -B/usr/msp430/bin/ -B/usr/msp430/lib/ -isystem /usr/msp430/include -isystem /usr/msp430/sys-include '
CFLAGS='-Os'
CPP=''
CPPFLAGS=''
DEFS=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EXEEXT=''
INSTALL_DATA='/usr/bin/install -c -m 644'
INSTALL_PROGRAM='/usr/bin/install -c'
INSTALL_SCRIPT='/usr/bin/install -c'
LDFLAGS=''
LIBOBJS=''
LIBS=''
LIPO='msp430-lipo'
LN_S='ln -s'
LTLIBOBJS=''
MAINT='#'
NM='/home/campo/System/Aur/gcc-msp430/src/build/./gcc/nm'
OBJEXT=''
PACKAGE_BUGREPORT=''
PACKAGE_NAME='GNU C Runtime Library'
PACKAGE_STRING='GNU C Runtime Library 1.0'
PACKAGE_TARNAME='libgcc'
PACKAGE_URL='http://www.gnu.org/software/libgcc/'
PACKAGE_VERSION='1.0'
PATH_SEPARATOR=':'
RANLIB='msp430-ranlib'
SHELL='/bin/sh'
STRIP='msp430-strip'
ac_ct_CC=''
asm_hidden_op=''
bindir='${exec_prefix}/bin'
build='i686-pc-linux-gnu'
build_alias='i686-pc-linux-gnu'
build_cpu='i686'
build_libsubdir='build-i686-pc-linux-gnu'
build_os='linux-gnu'
build_subdir='build-i686-pc-linux-gnu'
build_vendor='pc'
datadir='${datarootdir}'
datarootdir='${prefix}/share'
decimal_float=''
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
enable_decimal_float=''
enable_shared='yes'
exec_prefix='NONE'
extra_parts=''
fixed_point=''
host='msp430-unknown-none'
host_alias='msp430'
host_cpu='msp430'
host_noncanonical='msp430'
host_os='none'
host_subdir='.'
host_vendor='unknown'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='/usr/share/info'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
libgcc_topdir='/home/campo/System/Aur/gcc-msp430/src/gcc-4.6.3/libgcc/..'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='/usr/share/man'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/usr'
program_transform_name='s&^&msp430-&'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
set_have_cc_tls=''
set_use_emutls=''
sharedstatedir='${prefix}/com'
slibdir='$(exec_prefix)/$(host_noncanonical)/lib'
sysconfdir='${prefix}/etc'
target_alias='msp430'
target_noncanonical='msp430'
target_subdir='msp430'
tmake_file=''
toolexecdir='$(exec_prefix)/$(target_noncanonical)'
toolexeclibdir='$(toolexecdir)/lib'
vis_hide=''
## confdefs.h. ##
/* confdefs.h */
#define PACKAGE_NAME "GNU C Runtime Library"
#define PACKAGE_TARNAME "libgcc"
#define PACKAGE_VERSION "1.0"
#define PACKAGE_STRING "GNU C Runtime Library 1.0"
#define PACKAGE_BUGREPORT ""
#define PACKAGE_URL "http://www.gnu.org/software/libgcc/"
configure: exit 1
Can you help me ?

[SOLVED] Cannot find package "flashplugin" or "archey".

[EDIT - yaourt and archey now installed, thanks]
I am running Arch 2.6.34 with GNOME desktop. When I type the command sudo pacman -S flashplugin or sudo pacman -S archey it tells me that it cannot find the package.
I had this problem previously when I was trying arch in a VM, and I couldn't figure out what I had missed. I have everything else properly installed and working fine, it's just these two packages I've come across that I cannot locate. I'm guessing there's probably more packages that I just haven't run into yet that wouldn't work either.
Last edited by Socialsymbol (2010-06-29 23:00:00)

Shazzam6999 wrote:
That's because archey is in the AUR. You can use yaourt to install packages from the aur similar to how you're trying, read the wikis and check it out.
http://wiki.archlinux.org/index.php/Arc … Repository
http://wiki.archlinux.org/index.php/Yaourt
Ok, thanks, I had forgotten about that.
When do they suspect they'll fix the flashplugin bug/vulnerability? And what is recommended to do until then as far as flash playback goes?
Last edited by Socialsymbol (2010-06-29 22:51:14)

[SOLVED] internal error Cannot find suitable emulator for x86_64

Hi,
After a reboot due to unrelated issues, virt-manager is not showing any of the VMs I had configured via qemu:
I checked connection properties, and everything else is showing up correctly, like the networks and storage. I tried to create new VMs out of existing storage and got this message:
Googling it suggested this happens when KVM module is not loaded. I modprobed kvm, kvm_intel and still got same result.
Systemd gave me the following:
% systemctl status libvirtd
libvirtd.service - Virtualization daemon
Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled)
Active: active (running) since Sat 2013-06-08 08:55:19 IST; 29min ago
Main PID: 1499 (libvirtd)
CGroup: name=systemd:/system/libvirtd.service
├─ 834 /sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf
├─ 863 /sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/nat_static.conf
├─ 881 /sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/closed_dhcp.conf
└─1499 /usr/bin/libvirtd -p /var/run/libvirtd.pid
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:08:20 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:08:20 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:08:35 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:08:35 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Googling that seems to indicate that this happens when virtualization is disabled by BIOS. But cpuinfo tells me that vm is supported:
% grep vmx /proc/cpuinfo | uniq -c
8 flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid
Can anyone help me? Has anyone else faced a similar problem?
Here are some version info:
local/libvirt 1.0.6-1
API for controlling virtualization engines (openvz,kvm,qemu,virtualbox,xen,etc)
local/qemu 1.4.2-1
A generic and open source processor emulator which achieves a good emulation speed by using dynamic translation.
Of which, qemu got updated just today. I will try rolling back to older version and post and update.
Ninja edit: Looks to be qemu. Just running qemu gives me this error:
% qemu-system-x86_64
qemu-system-x86_64: error while loading shared libraries: libiscsi.so.1: cannot open shared object file: No such file or directory
EDIT: The resolution was
pacman -S libiscsi libaio
systemctl restart libvirtd
EDIT2: Made subject line better searchable
Last edited by railmaniac (2013-06-08 04:19:24)

HI,
First of all thanks a lot for this post. I am facing the same issue since yest.
After reboot, my VMs gone missing and even virt-manager was not working (as shown in the screenshots which you have pasted in your post).
Now after trying out the workout which you had mentioned, I am able to get the virt-manager working.
But I am not sure if I can get back my missing VMs .
I am new to linux. Kindly guide me on how I can get back those VMs.
[root@skoduri lib64]# ls /etc/libvirt/qemu/
networks rhel6-vm2.xml rhel6.xml
[root@skoduri lib64]#
[root@skoduri lib64]# ls /etc/libvirt/storage/
autostart default.xml storage_1.xml
[root@skoduri lib64]#
[root@skoduri lib64]#
Thanks,
Soumya

[SOLVED] LyX cannot find layout/document classes

LyX refuses to produce any output for me because it cannot find article.layout, or any other common layout. This file is installed in /usr/share/lyx/layouts/article.layout.
I have installed texlive-most and texlive-bin. I have installed dvips and the other programs necessary to render files.
I have tried clearing my LyX config several times (rm -rf ~/.lyx) and it hasn't helped. I have removed and reinstalled texlive with various options, including -Rn and -Rc, multiple times. I have also manually removed leftover files from both LyX and texlive. I have told LyX to reconfigure itself several times.
No output will be produced. I thought maybe this was caused by some stray old config file floating somewhere out there but heretofore have not been able to find it or remove it via -Rn. Someone told me that a fresh install of LyX works.
Any help would be deeply appreciated.
EDIT: I have also tried updating my PATH to include /opt/texlive/bin as suggested somewhere else on these boards and then running and reconfiguring LyX. It doesn't help.
Last edited by cookiecaper (2010-08-17 17:49:20)

Ugh, just solved it. Hopefully this helps someone. I hadn't removed ~/.texlive. Removing that and restarting LyX fixed it.

Pacman cannot find i3-wm [Solved]

Similar Messages

Maybe you are looking for