PAE kernel?

Hi,
I am using PAE kernel and the package I use is abandoned: https://aur.archlinux.org/packages/linux-pae/
What should I use instead?
There is linux-libre-pae package but there are some strange dependencies that I dont like. Perhaps there is another possibility...
Thanks

And Phoronix backs that up with numbers:
http://www.phoronix.com/scan.php?page=a … _pae&num=1
Edit:
And again a couple years later:
www.phoronix.com/vr.php?view=15873
Last edited by Ziusudra (2015-04-06 00:06:03)

Similar Messages

  • Help! About the pae kernel

    I wanna to compile the pae kernel from AUR, but the size of /tmp is only 1.6GB. So i failed.
    Anyone to help?

    *headdesk*
    Then don't compile it in /tmp
    http://www.catb.org/esr/faqs/smart-questions.html
    EDIT: clarkok, I'd like to clarify why I will not be providing any further assistance.  Some of these are rules on this forum, others should just be common sense on how to interact with others, all of them will ensure you get the help you are looking for.
    1) Putting "Help!" in your title is presumptious and borderline rude which means many users will already be a bit offput before they open this thread.
    2) Posting a question that has clear and well documented answers when you have clearly done none of your own research means you value your own time more than anyone else's.  Valuing your own time more than mine is fine, just don't flaunt that fact when you are *asking* for help.
    3) When you are given an answer, you should not immediately ask "how to do that", this is why I posted the link I did: read it.
    4) If you are going to ask a follow up question, ask it in the forums, not in a private email.  I have no need for a pen pal.  While I have chosen to share my email through the forum, I'd expect other users to be more sensible about when it is appropriate to use it.
    EDIT 2: as you are new I'll offer suggestions that may get you back on the right track.
    1) Read the makepkg wiki and/or man page.
    2) I suspect you are not actually using makepkg, but rather something like yaourt; don't.
    3) Don't leave other users to guess and suspect - provide this information clearly.
    4) All this, and other helpful points, can be found in the link above.  Again, read it.
    Last edited by Trilby (2013-02-03 12:46:28)

  • Is there a PAE kernel for Arch?

    I don't see any in the Packages page.

    If you're sure you need it, it's in the AUR http://aur.archlinux.org/packages.php?ID=24469
    I see that you're new here, so please read the wiki about AUR.
    Welcome to the forums :-)
    Last edited by karol (2011-07-24 11:04:31)

  • Can't install oracle-validated with kernel-PAE

    I can't install oracle-validated when using kernel-PAE.... Anyone help?
    Take a look at the following actions:
    [root@db ~]# up2date -i oracle-validated
    Fetching Obsoletes list for channel: el5_i386_latest...
    Fetching rpm headers...
    Name                                    Version        Rel    
    oracle-validated                        1.0.0          18.el5            i386 
    Testing package set / solving RPM inter-dependencies...
    There was a package dependency problem. The message was:
    Unresolvable chain of dependencies:
    glibc-headers  2.5-34                    requires kernel-headers
    glibc-headers-2.5-34                     requires kernel-headers >= 2.2.1
    oracle-validated  1.0.0-18.el5           requires kernel-headers
    The following packages were added to your selection to satisfy dependencies:
    Package                                Required by
    gcc-4.1.2-44.el5.i386                   oracle-validated-1.0.0-18.el5           gcc                                    
    gcc-c++-4.1.2-44.el5.i386               oracle-validated-1.0.0-18.el5           gcc-c++                                
    libstdc++-devel-4.1.2-44.el5.i386       oracle-validated-1.0.0-18.el5           libstdc++-devel                        
    [root@db ~]# rpm -q kernel-PAE
    kernel-PAE-2.6.18-92.el5
    kernel-PAE-2.6.18-128.1.10.0.1.el5
    [root@db ~]# Best Regards,
    Joao

    Problem was that up2date config had marked to not install kernel* packages :)
    ran up2date-config and removed that ...
    Regards
    Joao Oliveira

  • Does kernel-uek for i686 support PAE features ?

    Hello,
    I have a new database server with 128 GB of RAM. On this server I'm obliged to install 11gR2 32 bit, so to receive full support I'm obliged also to install a 32bit OEL.
    If I use the el5 kernel with OEL 5.7 I can see only 64 GB of RAM, but I would like to install UEK . I didn't find any PAE unbreakable kernel, how can I modify UEK to see 64 GB of RAM ?
    Regards .

    Installing Linux x86_64 will probably be your only option if you use RHEL or Oracle Linux 5 or later.
    Under Enterprise Linux 5 there are kernel limitations that allow you to use only up to 16 GB reliably before you can run into lowmem starvation issues. The situation was different with EL3 and 4 and the hugemem kernel, which provided more lowmem space to manage the amount of physical RAM.
    http://docs.oracle.com/cd/E11882_01/server.112/e10839/appi_vlm.htm
    Red Hat Enterprise Linux 5/ Oracle Linux 5 on 32-bit does not have the hugemem kernel. It supports only the 3GB user process/ 1GB kernel split. It has a PAE kernel that supports systems with more than 4GB of RAM and reliably upto 16GB. Since this has a 3GB/1GB kernel split, the system may run out of lowmem if the system's load consumes lots of lowmem. There is no equivalent kernel for hugemem in Enterprise Linux 5 and one is recommended to either use Enterprise Linux 4 with hugemem or go for 64-bit.

  • [SOLVED] Kernel panic - unable to mount root fs

    I'm having some trouble with my Toshiba NB255 netbook. It no longer boots after I performed a major pacman upgrade. It hangs with this error message:
    http://imgur.com/Cxj1z
    I did some research and found a couple of threads with problems similar to mine:
    https://bbs.archlinux.org/viewtopic.php?id=98771
    https://bbs.archlinux.org/viewtopic.php?id=98496
    From what I could tell, both had something to do with the initrd, but I'm not sure what to do in my specific situation. Additionally, according to my pacman.log the initrd was updated successfully during the upgrade. I did, however, also recently install some stuff to try to get my iPhone to tether to the netbook over USB (
    menu.lst: (the "root=" part of the first option was originally in the disk-by-uuid format, I changed it trying to fix the issue)
    # Config file for GRUB - The GNU GRand Unified Bootloader
    # /boot/grub/menu.lst
    # DEVICE NAME CONVERSIONS
    # Linux Grub
    # /dev/fd0 (fd0)
    # /dev/sda (hd0)
    # /dev/sdb2 (hd1,1)
    # /dev/sda3 (hd0,2)
    # FRAMEBUFFER RESOLUTION SETTINGS
    # +-------------------------------------------------+
    # | 640x480 800x600 1024x768 1280x1024
    # ----+--------------------------------------------
    # 256 | 0x301=769 0x303=771 0x305=773 0x307=775
    # 32K | 0x310=784 0x313=787 0x316=790 0x319=793
    # 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
    # 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
    # +-------------------------------------------------+
    # for more details and different resolutions see
    # [url]http://wiki.archlinux.org/index.php/GRUB#Framebuffer_Resolution[/url]
    # general configuration:
    timeout 2
    default 0
    color light-blue/black light-cyan/blue
    # boot sections follow
    # each is implicitly numbered from 0 in the order of appearance below
    # TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
    # (0) Arch Linux
    title Arch Linux
    root (hd0,0)
    kernel /vmlinuz26 root=/dev/sda3 resume=/dev/disk/by-uuid/55dfc8bd-98b4-4f27-875c-e7b06c8b1c3e ro
    initrd /kernel26.img
    # (1) Arch Linux
    title Arch Linux Fallback
    root (hd0,0)
    kernel /vmlinuz26 root=/dev/disk/by-uuid/0c38b0a8-2ce1-4b16-b902-3d9f0cc8b2cc ro
    initrd /kernel26-fallback.img
    # (2) Windows
    #title Windows
    #rootnoverify (hd0,0)
    #makeactive
    #chainloader +1
    dmesg.log:
    Initializing cgroup subsys cpuset
    Initializing cgroup subsys cpu
    Linux version 2.6.34-ARCH (tobias@T-POWA-LX) (gcc version 4.5.0 20100610 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jul 5 21:03:38 UTC 2010
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
    BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
    BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000003f5d0000 (usable)
    BIOS-e820: 000000003f5d0000 - 000000003f5e0000 (ACPI data)
    BIOS-e820: 000000003f5e0000 - 000000003f5e3000 (ACPI NVS)
    BIOS-e820: 000000003f5e3000 - 0000000040000000 (reserved)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    DMI present.
    e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
    e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    last_pfn = 0x3f5d0 max_arch_pfn = 0x100000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-CFFFF write-protect
    D0000-DFFFF uncachable
    E0000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 000000000 mask 0C0000000 write-back
    1 base 03F600000 mask 0FFE00000 uncachable
    2 base 03F800000 mask 0FF800000 uncachable
    3 disabled
    4 disabled
    5 disabled
    6 disabled
    7 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
    Scanning 1 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000001000 (reserved)
    modified: 0000000000001000 - 0000000000002000 (usable)
    modified: 0000000000002000 - 0000000000010000 (reserved)
    modified: 0000000000010000 - 000000000009dc00 (usable)
    modified: 000000000009dc00 - 00000000000a0000 (reserved)
    modified: 00000000000dc000 - 00000000000e0000 (reserved)
    modified: 00000000000e4000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 000000003f5d0000 (usable)
    modified: 000000003f5d0000 - 000000003f5e0000 (ACPI data)
    modified: 000000003f5e0000 - 000000003f5e3000 (ACPI NVS)
    modified: 000000003f5e3000 - 0000000040000000 (reserved)
    modified: 00000000e0000000 - 00000000f0000000 (reserved)
    modified: 00000000fec00000 - 00000000fec10000 (reserved)
    modified: 00000000fee00000 - 00000000fee01000 (reserved)
    modified: 00000000ff000000 - 0000000100000000 (reserved)
    initial memory mapped : 0 - 01800000
    found SMP MP-table at [c00f7d40] f7d40
    init_memory_mapping: 0000000000000000-00000000377fe000
    0000000000 - 0000400000 page 4k
    0000400000 - 0037400000 page 2M
    0037400000 - 00377fe000 page 4k
    kernel direct mapping tables up to 377fe000 @ 15000-1a000
    RAMDISK: 3f453000 - 3f5c0000
    Allocated new RAMDISK: 00100000 - 0026c574
    Move RAMDISK from 000000003f453000 - 000000003f5bf573 to 00100000 - 0026c573
    ACPI: RSDP 000f7ca0 00024 (v02 TOSCPL)
    ACPI: XSDT 3f5d7ae9 00074 (v01 TOSCPL TOSCPL00 06040000 LTP 00000000)
    ACPI: FACP 3f5dfc60 000F4 (v03 TOSCPL TOSCPL00 06040000 PTL 00000002)
    ACPI: DSDT 3f5d8c7f 06F6D (v01 TOSCPL TOSCPL00 06040000 MSFT 03000000)
    ACPI: FACS 3f5e2fc0 00040
    ACPI: TCPA 3f5dfd54 00032 (v01 Phoeni x 06040000 TL 00000000)
    ACPI: HPET 3f5dfd86 00038 (v01 DELL M09 06040000 LOHR 0000005A)
    ACPI: MCFG 3f5dfdbe 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
    ACPI: SLIC 3f5dfdfa 00176 (v01 TOSCPL TOSCPL00 06040000 LOHR 00000000)
    ACPI: APIC 3f5dff70 00068 (v01 TOSCPL TOSCPL00 06040000 LTP 00000000)
    ACPI: BOOT 3f5dffd8 00028 (v01 TOSCPL TOSCPL00 06040000 LTP 00000001)
    ACPI: SSDT 3f5d80df 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
    ACPI: SSDT 3f5d8039 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
    ACPI: SSDT 3f5d7b5d 004DC (v02 PmRef CpuPm 00003000 INTL 20050624)
    ACPI: Local APIC address 0xfee00000
    125MB HIGHMEM available.
    887MB LOWMEM available.
    mapped low ram: 0 - 377fe000
    low ram: 0 - 377fe000
    Zone PFN ranges:
    DMA 0x00000001 -> 0x00001000
    Normal 0x00001000 -> 0x000377fe
    HighMem 0x000377fe -> 0x0003f5d0
    Movable zone start PFN for each node
    early_node_map[3] active PFN ranges
    0: 0x00000001 -> 0x00000002
    0: 0x00000010 -> 0x0000009d
    0: 0x00000100 -> 0x0003f5d0
    On node 0 totalpages: 259422
    free_area_init_node: node 0, pgdat c1402fc0, node_mem_map c1563020
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 3950 pages, LIFO batch:0
    Normal zone: 1744 pages used for memmap
    Normal zone: 221486 pages, LIFO batch:31
    HighMem zone: 252 pages used for memmap
    HighMem zone: 31958 pages, LIFO batch:7
    Using APIC driver default
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    SMP: Allowing 2 CPUs, 0 hotplug CPUs
    nr_irqs_gsi: 24
    early_res array is doubled to 64 at [16000 - 167ff]
    PM: Registered nosave memory: 0000000000002000 - 0000000000010000
    PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
    PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
    PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
    Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
    Booting paravirtualized kernel on bare hardware
    setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    PERCPU: Embedded 14 pages/cpu @c2000000 s34388 r0 d22956 u2097152
    pcpu-alloc: s34388 r0 d22956 u2097152 alloc=1*4194304
    pcpu-alloc: [0] 0 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257394
    Kernel command line: root=/dev/disk/by-uuid/0c38b0a8-2ce1-4b16-b902-3d9f0cc8b2cc resume=/dev/disk/by-uuid/55dfc8bd-98b4-4f27-875c-e7b06c8b1c3e ro
    PID hash table entries: 4096 (order: 2, 16384 bytes)
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    allocated 5190700 bytes of page_cgroup
    please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Subtract (52 early reservations)
    #1 [0000001000 - 0000002000] EX TRAMPOLINE
    #2 [0001000000 - 000155ad84] TEXT DATA BSS
    #3 [000155b000 - 0001561164] BRK
    #4 [00000f7d50 - 0000100000] BIOS reserved
    #5 [00000f7d40 - 00000f7d50] MP-table mpf
    #6 [000009dc00 - 000009e071] BIOS reserved
    #7 [000009e1c1 - 00000f7d40] BIOS reserved
    #8 [000009e071 - 000009e1c1] MP-table mpc
    #9 [0000010000 - 0000011000] TRAMPOLINE
    #10 [0000011000 - 0000015000] ACPI WAKEUP
    #11 [0000015000 - 0000016000] PGTABLE
    #12 [0000100000 - 000026d000] NEW RAMDISK
    #13 [0001562000 - 0001563000] BOOTMEM
    #14 [0001563000 - 0001d53000] BOOTMEM
    #15 [000155adc0 - 000155adc4] BOOTMEM
    #16 [000155ae00 - 000155aec0] BOOTMEM
    #17 [000155aec0 - 000155af14] BOOTMEM
    #18 [0001d53000 - 0001d56000] BOOTMEM
    #19 [000155af40 - 000155af4c] BOOTMEM
    #20 [0001561180 - 0001561780] BOOTMEM
    #21 [000155af80 - 000155afa5] BOOTMEM
    #22 [000155afc0 - 000155afe7] BOOTMEM
    #23 [0001561780 - 0001561924] BOOTMEM
    #24 [0001561940 - 0001561980] BOOTMEM
    #25 [0001561980 - 00015619c0] BOOTMEM
    #26 [00015619c0 - 0001561a00] BOOTMEM
    #27 [0001561a00 - 0001561a40] BOOTMEM
    #28 [0001561a40 - 0001561a80] BOOTMEM
    #29 [0001561a80 - 0001561ac0] BOOTMEM
    #30 [0001561ac0 - 0001561b00] BOOTMEM
    #31 [0001561b00 - 0001561b40] BOOTMEM
    #32 [0001561b40 - 0001561b80] BOOTMEM
    #33 [0001561b80 - 0001561bc0] BOOTMEM
    #34 [0001561bc0 - 0001561c00] BOOTMEM
    #35 [0001561c00 - 0001561c40] BOOTMEM
    #36 [0001561c40 - 0001561c50] BOOTMEM
    #37 [0001561c80 - 0001561c90] BOOTMEM
    #38 [0001561cc0 - 0001561d3d] BOOTMEM
    #39 [0001561d40 - 0001561dbd] BOOTMEM
    #40 [0002000000 - 000200e000] BOOTMEM
    #41 [0002200000 - 000220e000] BOOTMEM
    #42 [0001561dc0 - 0001561dc4] BOOTMEM
    #43 [0001561e00 - 0001561e04] BOOTMEM
    #44 [0001561e40 - 0001561e48] BOOTMEM
    #45 [0001561e80 - 0001561e88] BOOTMEM
    #46 [0001561ec0 - 0001561f68] BOOTMEM
    #47 [0001561f80 - 0001561fe8] BOOTMEM
    #48 [0001d56000 - 0001d5a000] BOOTMEM
    #49 [0001d5a000 - 0001dda000] BOOTMEM
    #50 [0001dda000 - 0001e1a000] BOOTMEM
    #51 [000220e000 - 000270142c] BOOTMEM
    Initializing HighMem for node 0 (000377fe:0003f5d0)
    Memory: 1016576k/1038144k available (2930k kernel code, 21112k reserved, 1209k data, 408k init, 128840k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc140b000 - 0xc1471000 ( 408 kB)
    .data : 0xc12dc8fc - 0xc140adc0 (1209 kB)
    .text : 0xc1000000 - 0xc12dc8fc (2930 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    Hierarchical RCU implementation.
    NR_IRQS:512
    Extended CMOS year: 2000
    Console: colour VGA+ 80x25
    console [tty0] enabled
    hpet clockevent registered
    Fast TSC calibration using PIT
    Detected 1662.845 MHz processor.
    Calibrating delay loop (skipped), value calculated using timer frequency.. 3327.26 BogoMIPS (lpj=5542816)
    Security Framework initialized
    Mount-cache hash table entries: 512
    Initializing cgroup subsys ns
    Initializing cgroup subsys cpuacct
    Initializing cgroup subsys memory
    Initializing cgroup subsys devices
    Initializing cgroup subsys freezer
    Initializing cgroup subsys net_cls
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    mce: CPU supports 5 MCE banks
    CPU0: Thermal monitoring handled by SMI
    using mwait in idle threads.
    Performance Events: Atom events, Intel PMU driver.
    ... version: 3
    ... bit width: 40
    ... generic registers: 2
    ... value mask: 000000ffffffffff
    ... max period: 000000007fffffff
    ... fixed-purpose events: 3
    ... event mask: 0000000700000003
    Checking 'hlt' instruction... OK.
    ACPI: Core revision 20100121
    Enabling APIC mode: Flat. Using 1 I/O APICs
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Atom(TM) CPU N455 @ 1.66GHz stepping 0a
    APIC calibration not consistent with PM-Timer: 299ms instead of 100ms
    APIC delta adjusted to PM-Timer: 1039171 (3117494)
    Booting Node 0, Processors #1 Ok.
    Initializing CPU#1
    CPU0: Thermal monitoring enabled (TM1)
    Brought up 2 CPUs
    Total of 2 processors activated (6653.18 BogoMIPS).
    devtmpfs: initialized
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    PCI: Using MMCONFIG for extended config space
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: SSDT 3f5d89a8 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
    ACPI: SSDT 3f5d833e 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
    ACPI: SSDT 3f5d8bab 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
    ACPI: SSDT 3f5d8923 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
    ACPI: No dock devices found.
    PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
    ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701f288), AE_ALREADY_EXISTS
    ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
    pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xf7ffffff]
    pci_root PNP0A08:00: host bridge window [io 0x0d00-0xfdff]
    pci 0000:00:02.0: reg 10: [mem 0xf0200000-0xf027ffff]
    pci 0000:00:02.0: reg 14: [io 0x18d0-0x18d7]
    pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
    pci 0000:00:02.0: reg 1c: [mem 0xf0000000-0xf00fffff]
    pci 0000:00:02.1: reg 10: [mem 0xf0280000-0xf02fffff]
    pci 0000:00:1b.0: reg 10: [mem 0xf0300000-0xf0303fff 64bit]
    pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1b.0: PME# disabled
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.1: PME# disabled
    pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.2: PME# disabled
    pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
    pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
    pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
    pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
    pci 0000:00:1d.7: reg 10: [mem 0xf0504000-0xf05043ff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1f.2: reg 10: [io 0x18e8-0x18ef]
    pci 0000:00:1f.2: reg 14: [io 0x18dc-0x18df]
    pci 0000:00:1f.2: reg 18: [io 0x18e0-0x18e7]
    pci 0000:00:1f.2: reg 1c: [io 0x18d8-0x18db]
    pci 0000:00:1f.2: reg 20: [io 0x18c0-0x18cf]
    pci 0000:00:1f.2: reg 24: [mem 0xf0504400-0xf05047ff]
    pci 0000:00:1f.2: PME# supported from D3hot
    pci 0000:00:1f.2: PME# disabled
    pci 0000:00:1f.3: reg 20: [io 0x18a0-0x18bf]
    pci 0000:00:1c.0: PCI bridge to [bus 05-05]
    pci 0000:00:1c.0: bridge window [io 0x0000-0x0000] (disabled)
    pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:07:00.0: reg 10: [mem 0xf0100000-0xf010ffff 64bit]
    pci 0000:07:00.0: supports D1
    pci 0000:07:00.0: PME# supported from D0 D1 D3hot
    pci 0000:07:00.0: PME# disabled
    pci 0000:00:1c.1: PCI bridge to [bus 07-07]
    pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:1c.1: bridge window [mem 0xf0100000-0xf01fffff]
    pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:09:00.0: reg 10: [io 0x2000-0x20ff]
    pci 0000:09:00.0: reg 18: [mem 0xf050c000-0xf050cfff 64bit pref]
    pci 0000:09:00.0: reg 20: [mem 0xf0508000-0xf050bfff 64bit pref]
    pci 0000:09:00.0: supports D1 D2
    pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:09:00.0: PME# disabled
    pci 0000:00:1c.2: PCI bridge to [bus 09-09]
    pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
    pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    pci 0000:00:1c.2: bridge window [mem 0xf0500000-0xf05fffff 64bit pref]
    pci 0000:00:1e.0: PCI bridge to [bus 11-11] (subtractive decode)
    pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x40000000-0xf7ffffff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [io 0x0d00-0xfdff] (subtractive decode)
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
    ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701f288), AE_ALREADY_EXISTS
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    vgaarb: loaded
    PCI: Using ACPI for IRQ routing
    PCI: pci_cache_line_size set to 64 bytes
    pci 0000:00:1d.7: address space collision: [mem 0xf0504000-0xf05043ff] conflicts with PCI Bus 0000:09 [mem 0xf0500000-0xf05fffff 64bit pref]
    pci 0000:00:1f.2: address space collision: [mem 0xf0504400-0xf05047ff] conflicts with PCI Bus 0000:09 [mem 0xf0500000-0xf05fffff 64bit pref]
    reserve RAM buffer: 0000000000002000 - 000000000000ffff
    reserve RAM buffer: 000000000009dc00 - 000000000009ffff
    reserve RAM buffer: 000000003f5d0000 - 000000003fffffff
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    Switching to clocksource tsc
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 8 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:01: [io 0x0800-0x080f] has been reserved
    system 00:01: [io 0x1000-0x107f] has been reserved
    system 00:01: [io 0x1180-0x11bf] has been reserved
    system 00:01: [io 0x04d0-0x04d1] has been reserved
    system 00:01: [io 0xfe00] has been reserved
    system 00:01: [io 0x164e-0x174c] has been reserved
    system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
    system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
    system 00:01: [mem 0xfef00000-0xfeffffff] has been reserved
    pci 0000:00:1c.0: BAR 14: assigned [mem 0x40000000-0x401fffff]
    pci 0000:00:1c.0: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit pref]
    pci 0000:00:1c.1: BAR 15: assigned [mem 0x40400000-0x405fffff 64bit pref]
    pci 0000:00:1c.2: BAR 14: assigned [mem 0x40600000-0x409fffff]
    pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
    pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
    pci 0000:00:1d.7: BAR 0: assigned [mem 0x40a00000-0x40a003ff]
    pci 0000:00:1d.7: BAR 0: set to [mem 0x40a00000-0x40a003ff] (PCI address [0x40a00000-0x40a003ff]
    pci 0000:00:1f.2: BAR 5: assigned [mem 0x40a00400-0x40a007ff]
    pci 0000:00:1f.2: BAR 5: set to [mem 0x40a00400-0x40a007ff] (PCI address [0x40a00400-0x40a007ff]
    pci 0000:00:1c.0: PCI bridge to [bus 05-05]
    pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff]
    pci 0000:00:1c.0: bridge window [mem 0x40200000-0x403fffff 64bit pref]
    pci 0000:00:1c.1: PCI bridge to [bus 07-07]
    pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
    pci 0000:00:1c.1: bridge window [mem 0xf0100000-0xf01fffff]
    pci 0000:00:1c.1: bridge window [mem 0x40400000-0x405fffff 64bit pref]
    pci 0000:00:1c.2: PCI bridge to [bus 09-09]
    pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
    pci 0000:00:1c.2: bridge window [mem 0x40600000-0x409fffff]
    pci 0000:00:1c.2: bridge window [mem 0xf0500000-0xf05fffff 64bit pref]
    pci 0000:00:1e.0: PCI bridge to [bus 11-11]
    pci 0000:00:1e.0: bridge window [io disabled]
    pci 0000:00:1e.0: bridge window [mem disabled]
    pci 0000:00:1e.0: bridge window [mem pref disabled]
    pci 0000:00:1c.0: enabling device (0000 -> 0003)
    pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:1c.0: setting latency timer to 64
    pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1c.1: setting latency timer to 64
    pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    pci 0000:00:1c.2: setting latency timer to 64
    pci 0000:00:1e.0: setting latency timer to 64
    pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
    pci_bus 0000:00: resource 6 [mem 0x000d0000-0x000d3fff]
    pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
    pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
    pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
    pci_bus 0000:00: resource 10 [mem 0x40000000-0xf7ffffff]
    pci_bus 0000:00: resource 11 [io 0x0d00-0xfdff]
    pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
    pci_bus 0000:05: resource 1 [mem 0x40000000-0x401fffff]
    pci_bus 0000:05: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
    pci_bus 0000:07: resource 0 [io 0x4000-0x4fff]
    pci_bus 0000:07: resource 1 [mem 0xf0100000-0xf01fffff]
    pci_bus 0000:07: resource 2 [mem 0x40400000-0x405fffff 64bit pref]
    pci_bus 0000:09: resource 0 [io 0x2000-0x2fff]
    pci_bus 0000:09: resource 1 [mem 0x40600000-0x409fffff]
    pci_bus 0000:09: resource 2 [mem 0xf0500000-0xf05fffff 64bit pref]
    pci_bus 0000:11: resource 4 [io 0x0000-0x0cf7]
    pci_bus 0000:11: resource 5 [mem 0x000a0000-0x000bffff]
    pci_bus 0000:11: resource 6 [mem 0x000d0000-0x000d3fff]
    pci_bus 0000:11: resource 7 [mem 0x000d4000-0x000d7fff]
    pci_bus 0000:11: resource 8 [mem 0x000d8000-0x000dbfff]
    pci_bus 0000:11: resource 9 [mem 0x000e0000-0x000e3fff]
    pci_bus 0000:11: resource 10 [mem 0x40000000-0xf7ffffff]
    pci_bus 0000:11: resource 11 [io 0x0d00-0xfdff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    UDP hash table entries: 512 (order: 2, 16384 bytes)
    UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    NET: Registered protocol family 1
    pci 0000:00:02.0: Boot video device
    PCI: CLS 32 bytes, default 64
    Unpacking initramfs...
    Freeing initrd memory: 1460k freed
    Simple Boot Flag at 0x35 set to 0x1
    apm: BIOS not found.
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1285380584.433:1): initialized
    highmem bounce pool size: 64 pages
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1736
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pcieport 0000:00:1c.0: setting latency timer to 64
    pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
    pcieport 0000:00:1c.1: setting latency timer to 64
    pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
    pcieport 0000:00:1c.2: setting latency timer to 64
    pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
    pcieport 0000:00:1c.0: Requesting control of PCIe PME from ACPI BIOS
    ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
    ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701f288), AE_ALREADY_EXISTS
    pcieport 0000:00:1c.0: Failed to receive control of PCIe PME service: ACPI _OSC failed
    pcie_pme: probe of 0000:00:1c.0:pcie01 failed with error -13
    pcieport 0000:00:1c.1: Requesting control of PCIe PME from ACPI BIOS
    ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
    ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701f288), AE_ALREADY_EXISTS
    pcieport 0000:00:1c.1: Failed to receive control of PCIe PME service: ACPI _OSC failed
    pcie_pme: probe of 0000:00:1c.1:pcie01 failed with error -13
    pcieport 0000:00:1c.2: Requesting control of PCIe PME from ACPI BIOS
    ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
    ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701f288), AE_ALREADY_EXISTS
    pcieport 0000:00:1c.2: Failed to receive control of PCIe PME service: ACPI _OSC failed
    pcie_pme: probe of 0000:00:1c.2:pcie01 failed with error -13
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    PM: Checking image partition /dev/disk/by-uuid/55dfc8bd-98b4-4f27-875c-e7b06c8b1c3e
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    PM: Resume from disk failed.
    registered taskstats version 1
    Initalizing network drop monitor service
    Freeing unused kernel memory: 408k freed
    udev: starting version 160
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ahci 0000:00:1f.2: version 3.0
    ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
    ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
    ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
    ahci 0000:00:1f.2: setting latency timer to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    scsi3 : ahci
    ata1: SATA max UDMA/133 abar m1024@0x40a00400 port 0x40a00500 irq 27
    ata2: SATA max UDMA/133 abar m1024@0x40a00400 port 0x40a00580 irq 27
    ata3: SATA max UDMA/133 abar m1024@0x40a00400 port 0x40a00600 irq 27
    ata4: SATA max UDMA/133 abar m1024@0x40a00400 port 0x40a00680 irq 27
    ata2: SATA link down (SStatus 0 SControl 300)
    ata3: SATA link down (SStatus 0 SControl 300)
    ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata4: SATA link down (SStatus 0 SControl 300)
    ata1.00: ATA-8: Hitachi HTS545025B9A300, PB2OC64G, max UDMA/133
    ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    ata1.00: configured for UDMA/133
    scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54502 PB2O PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4
    sd 0:0:0:0: [sda] Attached SCSI disk
    kjournald starting. Commit interval 5 seconds
    EXT3-fs (sda3): mounted filesystem with writeback data mode
    udev: starting version 160
    cfg80211: Calling CRDA to update world regulatory domain
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    input: PC Speaker as /devices/platform/pcspkr/input/input1
    Linux agpgart interface v0.103
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0c/PNP0C0D:00/input/input2
    ACPI: Lid Switch [LID0]
    input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0C:00/input/input3
    i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    ACPI: Power Button [PWRB]
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    ACPI: Power Button [PWRF]
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1d.7: using broken periodic workaround
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1d.7: irq 23, io mem 0x40a00000
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 8 ports detected
    Monitor-Mwait will be used to enter C-1 state
    Monitor-Mwait will be used to enter C-2 state
    Monitor-Mwait will be used to enter C-3 state
    Marking TSC unstable due to TSC halts in idle
    Switching to clocksource hpet
    ACPI: AC Adapter [ACAD] (off-line)
    usb 1-4: new high speed USB device using ehci_hcd and address 2
    r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    r8169 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    uhci_hcd: USB Universal Host Controller Interface driver
    uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
    r8169 0000:09:00.0: setting latency timer to 64
    r8169 0000:09:00.0: (unregistered net_device): unknown MAC, using family default
    r8169 0000:09:00.0: irq 28 for MSI/MSI-X
    r8169 0000:09:00.0: eth0: RTL8101e at 0xf8664000, 88:ae:1d:46:3e:b2, XID 0c200000 IRQ 28
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
    uhci_hcd 0000:00:1d.3: setting latency timer to 64
    uhci_hcd 0000:00:1d.3: UHCI Host Controller
    uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
    agpgart-intel 0000:00:00.0: detected 8188K stolen memory
    agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    ath9k 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    ath9k 0000:07:00.0: setting latency timer to 64
    Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000
    ath: EEPROM regdomain: 0x65
    ath: EEPROM indicates we should expect a direct regpair map
    ath: Country alpha2 being used: 00
    ath: Regpair used: 0x65
    ACPI: Battery Slot [BAT1] (battery present)
    input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
    [drm] Initialized drm 1.1.0 20060810
    rtc_cmos 00:04: RTC can wake from S4
    rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    usb 1-8: new high speed USB device using ehci_hcd and address 3
    i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    i915 0000:00:02.0: setting latency timer to 64
    i915 0000:00:02.0: irq 29 for MSI/MSI-X
    [drm] set up 7M of stolen space
    phy0: Selected rate control algorithm 'ath9k_rate_control'
    Registered led device: ath9k-phy0::radio
    Registered led device: ath9k-phy0::assoc
    Registered led device: ath9k-phy0::tx
    Registered led device: ath9k-phy0::rx
    phy0: Atheros AR9285 Rev:2 mem=0xf8160000, irq=17
    fuse init (API version 7.13)
    [drm] initialized overlay support
    Initializing USB Mass Storage driver...
    scsi4 : usb-storage 1-4:1.0
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    Linux video capture interface: v2.00
    uvcvideo: Found UVC 1.00 device USB 2.0 Camera (064e:c211)
    input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input6
    usbcore: registered new interface driver uvcvideo
    USB Video Class driver (v0.1.0)
    [drm] Big FIFO is enabled
    [drm] Big FIFO is enabled
    [drm] Big FIFO is enabled
    [drm] Big FIFO is enabled
    Console: switching to colour frame buffer device 128x37
    fb0: inteldrmfb frame buffer device
    registered panic notifier
    [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    HDA Intel 0000:00:1b.0: irq 30 for MSI/MSI-X
    HDA Intel 0000:00:1b.0: setting latency timer to 64
    hda_codec: ALC259: BIOS auto-probing.
    input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
    scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
    sd 4:0:0:0: Attached scsi generic sg1 type 0
    sd 4:0:0:0: [sdb] Attached SCSI removable disk
    EXT3-fs (sda3): using internal journal
    kjournald starting. Commit interval 5 seconds
    EXT3-fs (sda4): warning: maximal mount count reached, running e2fsck is recommended
    EXT3-fs (sda4): using internal journal
    EXT3-fs (sda4): mounted filesystem with writeback data mode
    Adding 265068k swap on /dev/sda2. Priority:-1 extents:1 across:265068k
    pacman.log: (the latest update + my attempt at iphone USB tethering)
    [2010-09-25 00:08] Running 'pacman -Syu'
    [2010-09-25 00:08] synchronizing package lists
    [2010-09-25 00:08] starting full system upgrade
    [2010-09-25 00:14] Running 'pacman -Syyu'
    [2010-09-25 00:14] synchronizing package lists
    [2010-09-25 00:14] upgraded pacman (3.4.0-2 -> 3.4.1-1)
    [2010-09-25 00:15] Running 'pacman -Syu'
    [2010-09-25 00:15] synchronizing package lists
    [2010-09-25 00:15] starting full system upgrade
    [2010-09-25 00:15] Running 'pacman -Syu'
    [2010-09-25 00:15] synchronizing package lists
    [2010-09-25 00:15] starting full system upgrade
    [2010-09-25 00:15] Running 'pacman -Syyu'
    [2010-09-25 00:15] synchronizing package lists
    [2010-09-25 00:16] starting full system upgrade
    [2010-09-25 00:16] Running 'pacman -Syyu'
    [2010-09-25 00:16] synchronizing package lists
    [2010-09-25 00:16] starting full system upgrade
    [2010-09-25 00:26] removed libelf (0.8.13-1)
    [2010-09-25 00:26] removed libv4l (0.6.4-1)
    [2010-09-25 00:26] installed goffice (0.8.9-1)
    [2010-09-25 00:26] upgraded abiword (2.8.6-1 -> 2.8.6-2)
    [2010-09-25 00:26] upgraded apvlv (0.0.9.7-1 -> 0.0.9.8-1)
    [2010-09-25 00:27] upgraded tzdata (2010j-1 -> 2010l-1)
    [2010-09-25 00:27] Generating locales...
    [2010-09-25 00:27] en_US.UTF-8... done
    [2010-09-25 00:27] en_US.ISO-8859-1... done
    [2010-09-25 00:27] Generation complete.
    [2010-09-25 00:27] upgraded glibc (2.12-4 -> 2.12.1-1)
    [2010-09-25 00:27] upgraded m4 (1.4.14-2 -> 1.4.15-1)
    [2010-09-25 00:27] upgraded autoconf (2.66-2 -> 2.67-1)
    [2010-09-25 00:27] upgraded glib2 (2.24.1-1 -> 2.24.2-1)
    [2010-09-25 00:27] installed iana-etc (2.30-1)
    [2010-09-25 00:27] warning: /etc/shadow installed as /etc/shadow.pacnew
    [2010-09-25 00:27] upgraded filesystem (2010.02-4 -> 2010.09-1)
    [2010-09-25 00:27] upgraded dbus-core (1.2.24-1 -> 1.4.0-1)
    [2010-09-25 00:27] upgraded xproto (7.0.17-1 -> 7.0.18-1)
    [2010-09-25 00:27] upgraded libxau (1.0.5-1 -> 1.0.6-1)
    [2010-09-25 00:27] upgraded libxcb (1.6-1 -> 1.7-1)
    [2010-09-25 00:27] upgraded kbproto (1.0.4-1 -> 1.0.5-1)
    [2010-09-25 00:27] upgraded libx11 (1.3.4-1 -> 1.3.5-1)
    [2010-09-25 00:27] upgraded dbus (1.2.24-1 -> 1.4.0-1)
    [2010-09-25 00:27] upgraded avahi (0.6.25-3 -> 0.6.27-2)
    [2010-09-25 00:27] upgraded lua (5.1.4-5 -> 5.1.4-6)
    [2010-09-25 00:27]
    [2010-09-25 00:27] ==> awesome installation notes:
    [2010-09-25 00:27] ----------------------------------------
    [2010-09-25 00:27] During some updates of awesome, the config file syntax changes heavily.
    [2010-09-25 00:27] This means that your configuration file (~/.config/awesome/rc.lua) for
    [2010-09-25 00:27] any other than this particular version of awesome may or may not work.
    [2010-09-25 00:27]
    [2010-09-25 00:27] upgraded awesome (3.4.5-2 -> 3.4.6-1)
    [2010-09-25 00:27] upgraded bzip2 (1.0.5-5 -> 1.0.6-1)
    [2010-09-25 00:27] upgraded cabextract (1.2-2 -> 1.3-1)
    [2010-09-25 00:27] upgraded ppl (0.10.2-3 -> 0.11-1)
    [2010-09-25 00:27] upgraded cloog-ppl (0.15.9-1 -> 0.15.9-2)
    [2010-09-25 00:27] upgraded consolekit (0.4.1-2 -> 0.4.1-4)
    [2010-09-25 00:27] The directories /usr/lib/perl5/current, /usr/lib/perl5/site_perl/current,
    [2010-09-25 00:27] /usr/lib/perl5/site_perl/5.10.1, and /usr/share/perl5/site_perl/5.10.1
    [2010-09-25 00:27] will be removed from @INC in a future release.
    [2010-09-25 00:27] The directory /usr/bin/perlbin/site will not be added to $PATH in a
    [2010-09-25 00:27] future release.
    [2010-09-25 00:27] upgraded perl (5.10.1-5 -> 5.12.1-2)
    [2010-09-25 00:27] upgraded openssl (1.0.0.a-2 -> 1.0.0.a-3)
    [2010-09-25 00:27] upgraded curl (7.21.0-1 -> 7.21.1-1)
    [2010-09-25 00:27] upgraded util-linux-ng (2.18-2 -> 2.18-3)
    [2010-09-25 00:27] upgraded module-init-tools (3.11.1-2 -> 3.12-1)
    [2010-09-25 00:27] upgraded udev (160-1 -> 162-1)
    [2010-09-25 00:27] upgraded device-mapper (2.02.70-1 -> 2.02.73-1)
    [2010-09-25 00:27] upgraded dhcpcd (5.2.5-1 -> 5.2.7-1)
    [2010-09-25 00:27] upgraded libldap (2.4.22-1 -> 2.4.23-1)
    [2010-09-25 00:27] upgraded libgpg-error (1.7-3 -> 1.9-2)
    [2010-09-25 00:27] upgraded libksba (1.0.7-1 -> 1.0.8-1)
    [2010-09-25 00:27] upgraded libassuan (2.0.0-1 -> 2.0.1-1)
    [2010-09-25 00:27] upgraded dirmngr (1.1.0rc1-1 -> 1.1.0-1)
    [2010-09-25 00:27] upgraded gcc-libs (4.5.0-6 -> 4.5.1-1)
    [2010-09-25 00:27] upgraded espeak (1.43.03-1 -> 1.44.05-1)
    [2010-09-25 00:27] upgraded feh (1.8-1 -> 1.9-1)
    [2010-09-25 00:27] upgraded x264 (20100722-1 -> 20100826-1)
    [2010-09-25 00:27] upgraded libvpx (0.9.1-1 -> 0.9.2-1)
    [2010-09-25 00:27] upgraded libdrm (2.4.21-1 -> 2.4.21-2)
    [2010-09-25 00:27] upgraded libva (0.31.0_p13-2 -> 1.0.4-1)
    [2010-09-25 00:27] upgraded ffmpeg (24460-1 -> 24953-1)
    [2010-09-25 00:27] upgraded nspr (4.8.4-1 -> 4.8.6-1)
    [2010-09-25 00:27] upgraded sqlite3 (3.6.23.1-1 -> 3.7.2-1)
    [2010-09-25 00:27] upgraded nss (3.12.6-3 -> 3.12.7-1)
    [2010-09-25 00:28] upgraded xulrunner (1.9.2.8-1 -> 1.9.2.10-1)
    [2010-09-25 00:28] upgraded firefox (3.6.8-1 -> 3.6.10-1)
    [2010-09-25 00:28] upgraded flashplugin (10.1.53.64-1 -> 10.1.85.3-1)
    [2010-09-25 00:28] installed elfutils (0.148-1)
    [2010-09-25 00:28] upgraded gcc (4.5.0-6 -> 4.5.1-1)
    [2010-09-25 00:28] ==> Unregistering cabalized packages...
    [2010-09-25 00:28] ==> Done.
    [2010-09-25 00:29] ==> All cabalized and yaourt-installed packages need to be reinstalled now.
    [2010-09-25 00:29] ==> See /usr/share/haskell/ and ghc-pkg list --user for a tentative list of affected packages.
    [2010-09-25 00:29] upgraded ghc (6.12.1-4 -> 6.12.3-1)
    [2010-09-25 00:29] upgraded git (1.7.2-1 -> 1.7.3-1)
    [2010-09-25 00:29] upgraded gnome-keyring (2.30.3-1 -> 2.30.3-2)
    [2010-09-25 00:29] upgraded pinentry (0.8.0-1 -> 0.8.0-2)
    [2010-09-25 00:29] upgraded gnupg2 (2.0.15-1 -> 2.0.16-2)
    [2010-09-25 00:29] upgraded grep (2.6.3-1 -> 2.7-1)
    [2010-09-25 00:29] upgraded gstreamer0.10 (0.10.29-1 -> 0.10.30-1)
    [2010-09-25 00:29] upgraded orc (0.4.6-1 -> 0.4.7-1)
    [2010-09-25 00:29] upgraded gstreamer0.10-base (0.10.29-1 -> 0.10.30-1)
    [2010-09-25 00:29] upgraded vim-runtime (7.2-1 -> 7.3.3-1)
    [2010-09-25 00:29] upgraded ruby (1.9.1_p429-1 -> 1.9.2_p0-3)
    [2010-09-25 00:29] Updating desktop and mime database...done.
    [2010-09-25 00:29] upgraded gvim (7.2-1 -> 7.3.3-1)
    [2010-09-25 00:29] Reading package info from stdin ... done.
    [2010-09-25 00:29] upgraded haskell-mtl (1.1.0.2-3 -> 1.1.0.2-4)
    [2010-09-25 00:29] Reading package info from stdin ... done.
    [2010-09-25 00:29] upgraded haskell-utf8-string (0.3.6-3 -> 0.3.6-4)
    [2010-09-25 00:29] Reading package info from stdin ... done.
    [2010-09-25 00:29] upgraded haskell-x11 (1.5.0.0-2 -> 1.5.0.0-5)
    [2010-09-25 00:29] upgraded libtool (2.2.10-1 -> 2.2.10-3)
    [2010-09-25 00:29] upgraded lcms (1.18-3 -> 1.19-1)
    [2010-09-25 00:29] upgraded imagemagick (6.6.2.10-1 -> 6.6.4.3-1)
    [2010-09-25 00:29] upgraded iproute2 (2.6.34-2 -> 2.6.35-3)
    [2010-09-25 00:29] upgraded iptables (1.4.8-1 -> 1.4.9-1)
    [2010-09-25 00:29] upgraded irssi (0.8.15-1 -> 0.8.15-3)
    [2010-09-25 00:29] upgraded jack (0.118.0-3 -> 0.118.0-4)
    [2010-09-25 00:29] upgraded libxi (1.3-2 -> 1.3.2-1)
    [2010-09-25 00:29] upgraded jasper (1.900.1-5 -> 1.900.1-6)
    [2010-09-25 00:29] upgraded linux-firmware (20100623-2 -> 20100807-1)
    [2010-09-25 00:30] >>> Updating module dependencies. Please wait ...
    [2010-09-25 00:30] >>> MKINITCPIO SETUP
    [2010-09-25 00:30] >>> ----------------
    [2010-09-25 00:30] >>> If you use LVM2, Encrypted root or software RAID,
    [2010-09-25 00:30] >>> Ensure you enable support in /etc/mkinitcpio.conf .
    [2010-09-25 00:30] >>> More information about mkinitcpio setup can be found here:
    [2010-09-25 00:30] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
    [2010-09-25 00:30]
    [2010-09-25 00:30] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2010-09-25 00:30] ==> Building image "default"
    [2010-09-25 00:30] ==> Running command: /sbin/mkinitcpio -k 2.6.35-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
    [2010-09-25 00:30] :: Begin build
    [2010-09-25 00:30] :: Parsing hook [base]
    [2010-09-25 00:30] :: Parsing hook [udev]
    [2010-09-25 00:30] :: Parsing hook [autodetect]
    [2010-09-25 00:30] :: Parsing hook [pata]
    [2010-09-25 00:30] :: Parsing hook [scsi]
    [2010-09-25 00:30] :: Parsing hook [sata]
    [2010-09-25 00:30] :: Parsing hook [filesystems]
    [2010-09-25 00:30] :: Generating module dependencies
    [2010-09-25 00:30] :: Generating image '/boot/kernel26.img'...SUCCESS
    [2010-09-25 00:30] ==> SUCCESS
    [2010-09-25 00:30] ==> Building image "fallback"
    [2010-09-25 00:30] ==> Running command: /sbin/mkinitcpio -k 2.6.35-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
    [2010-09-25 00:30] :: Begin build
    [2010-09-25 00:30] :: Parsing hook [base]
    [2010-09-25 00:31] :: Parsing hook [udev]
    [2010-09-25 00:31] :: Parsing hook [pata]
    [2010-09-25 00:31] :: Parsing hook [scsi]
    [2010-09-25 00:33] :: Parsing hook [sata]
    [2010-09-25 00:34] :: Parsing hook [filesystems]
    [2010-09-25 00:35] :: Generating module dependencies
    [2010-09-25 00:35] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
    [2010-09-25 00:35] ==> SUCCESS
    [2010-09-25 00:35] upgraded kernel26 (2.6.34.1-1 -> 2.6.35.5-1)
    [2010-09-25 00:35] upgraded kernel26-headers (2.6.34.1-1 -> 2.6.35.5-1)
    [2010-09-25 00:35] upgraded lftp (4.0.9-1 -> 4.0.10-1)
    [2010-09-25 00:35] upgraded libass (0.9.9-1 -> 0.9.11-1)
    [2010-09-25 00:35] upgraded libcdaudio (0.99.12-4 -> 0.99.12-5)
    [2010-09-25 00:35] upgraded libcups (1.4.4-1 -> 1.4.4-3)
    [2010-09-25 00:35] upgraded libdatrie (0.2.3-1 -> 0.2.4-1)
    [2010-09-25 00:35] upgraded libfetch (2.32-1 -> 2.33-1)
    [2010-09-25 00:35] upgraded libgnome-keyring (2.30.1-1 -> 2.30.1-2)
    [2010-09-25 00:35] upgraded libid3tag (0.15.1b-5 -> 0.15.1b-6)
    [2010-09-25 00:35] upgraded libpciaccess (0.11.0-1 -> 0.12.0-1)
    [2010-09-25 00:35] upgraded libproxy (0.3.1-1 -> 0.4.6-1)
    [2010-09-25 00:35] installed v4l-utils (0.8.1-1)
    [2010-09-25 00:35] upgraded libxvmc (1.0.5-1 -> 1.0.6-1)
    [2010-09-25 00:35] upgraded lirc-utils (0.8.6-3 -> 0.8.6-4)
    [2010-09-25 00:35] upgraded lvm2 (2.02.70-1 -> 2.02.73-1)
    [2010-09-25 00:35] upgraded man-pages (3.25-1 -> 3.26-1)
    [2010-09-25 00:35] upgraded mathomatic (15.1.5-1 -> 15.2.1-1)
    [2010-09-25 00:35] upgraded mdadm (3.1.2-2 -> 3.1.4-1)
    [2010-09-25 00:35] upgraded mkinitcpio-busybox (1.16.2-1 -> 1.17.2-1)
    [2010-09-25 00:35] upgraded modemmanager (0.3-2 -> 0.4-1)
    [2010-09-25 00:35] upgraded mpfr (3.0.0-1 -> 3.0.0-2)
    [2010-09-25 00:35] upgraded smbclient (3.5.4-1 -> 3.5.5-1)
    [2010-09-25 00:35] upgraded mplayer (31774-1 -> 32227-1)
    [2010-09-25 00:35] upgraded murrine-themes-collection (20100201-1 -> 20100910-1)
    [2010-09-25 00:35] upgraded nano (2.2.4-1 -> 2.2.5-1)
    [2010-09-25 00:35] upgraded ncmpcpp (0.5.4-1 -> 0.5.5-1)
    [2010-09-25 00:35] upgraded networkmanager (0.8-1 -> 0.8.1-1)
    [2010-09-25 00:35] upgraded network-manager-applet (0.8-3 -> 0.8.1-1)
    [2010-09-25 00:35] upgraded tcp_wrappers (7.6-11 -> 7.6-12)
    [2010-09-25 00:35] upgraded openssh (5.5p1-1 -> 5.6p1-1)
    [2010-09-25 00:35] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
    [2010-09-25 00:35] upgraded pacman-mirrorlist (20100621-1 -> 20100825-1)
    [2010-09-25 00:35] upgraded perl-list-moreutils (0.22-2 -> 0.22-4)
    [2010-09-25 00:35] upgraded pixman (0.18.2-1 -> 0.18.4-1)
    [2010-09-25 00:35] upgraded poppler-data (0.4.2-1 -> 0.4.3-1)
    [2010-09-25 00:35] upgraded psmisc (22.11-1 -> 22.13-1)
    [2010-09-25 00:35] upgraded pycairo (1.8.8-1 -> 1.8.10-1)
    [2010-09-25 00:36] upgraded pygtk (2.17.0-1 -> 2.17.0-2)
    [2010-09-25 00:36] upgraded renderproto (0.11-1 -> 0.11.1-1)
    [2010-09-25 00:36] upgraded rpcbind (0.2.0-1 -> 0.2.0-2)
    [2010-09-25 00:36] upgraded rxvt-unicode-256color (9.07-8 -> 9.07-9)
    [2010-09-25 00:36] warning: /etc/slim.conf installed as /etc/slim.conf.pacnew
    [2010-09-25 00:36] upgraded slim (1.3.1-7 -> 1.3.2-1)
    [2010-09-25 00:36] warning: /etc/sudoers installed as /etc/sudoers.pacnew
    [2010-09-25 00:36] upgraded sudo (1.7.3-1 -> 1.7.4.p4-1)
    [2010-09-25 00:36] upgraded synergy (1.3.1-7 -> 1.3.4-2)
    [2010-09-25 00:36] upgraded syslog-ng (3.1.1-1 -> 3.1.2-1)
    [2010-09-25 00:36] upgraded sysvinit (2.86-5 -> 2.88-1)
    [2010-09-25 00:36] upgraded upower (0.9.4-1 -> 0.9.5-1)
    [2010-09-25 00:36] upgraded usbutils (0.87-1 -> 0.90-1)
    [2010-09-25 00:36] upgraded videoproto (2.3.0-1 -> 2.3.1-1)
    [2010-09-25 00:36] upgraded vim-colorsamplerpack (8.03-1 -> 8.03-2)
    [2010-09-25 00:36] upgraded vlc (1.1.1-3 -> 1.1.4-2)
    [2010-09-25 00:36] upgraded wine (1.2-1 -> 1.3.3-1)
    [2010-09-25 00:36] upgraded xextproto (7.1.1-1 -> 7.1.2-1)
    [2010-09-25 00:36] upgraded xf86-input-evdev (2.4.0-1 -> 2.4.0-2)
    [2010-09-25 00:36] upgraded xfce-utils (4.6.2-1 -> 4.6.2-2)
    [2010-09-25 00:36] upgraded xfconf (4.6.2-1 -> 4.6.2-2)
    [2010-09-25 00:36] upgraded xfdesktop (4.6.2-1 -> 4.6.2-2)
    [2010-09-25 00:36] upgraded xfsprogs (3.1.2-1 -> 3.1.3-1)
    [2010-09-25 00:36] Reading package info from stdin ... done.
    [2010-09-25 00:36] upgraded xmonad (0.9.1-4 -> 0.9.1-8)
    [2010-09-25 00:36] upgraded xorg-server-utils (7.5-4 -> 7.5-6)
    [2010-09-25 00:36] upgraded xorg-utils (7.6-2 -> 7.6-3)
    [2010-09-25 00:36] upgraded xterm (259-1 -> 261-1)
    [2010-09-25 00:36] upgraded xz (4.999.9beta-5 -> 4.999.9beta_174_g41bc-1)
    [2010-09-25 00:36] upgraded youtube-dl (2010.07.14-1 -> 2010.08.04-1)
    [2010-09-25 00:41] Running 'pacman -S xcompmgr'
    [2010-09-25 00:41] installed xcompmgr (1.1.5-1)
    [2010-09-27 23:25] Running 'pacman -S libimobiledevice'
    [2010-09-27 23:25] installed libplist (1.3-1)
    [2010-09-27 23:25] installed usbmuxd (1.0.4-2)
    [2010-09-27 23:25] installed libimobiledevice (1.0.2-1)
    [2010-09-27 23:27] Running 'pacman -U /home/brandon/downloads/ipheth-utils/ipheth-utils-1.0-1-i686.pkg.tar.xz'
    [2010-09-27 23:27] >>> Reloading udev rules
    [2010-09-27 23:27] >>> You can load the iPhone Ethernet Driver now - ipheth
    [2010-09-27 23:27] installed ipheth-utils (1.0-1)
    Last edited by bas1 (2010-09-30 01:48:43)

    karol wrote:
    bas1 wrote:I guess the thing to do would be to try to re-generate the initrd via chroot, but I have no idea how to do this.
    http://wiki.archlinux.org/index.php/Chroot
    You may try to add or remove some hooks as this mysteriously helped some folks.
    Good luck.
    Well, chrooting and regenerating the initial ramdisk has fixed it! Thanks for the help!!
    Edit:  and just FYI, I didn't change any hooks in /etc/mkinitcpio.conf when I re-generated.  But yeah, if someone else has this issue, try playing with them.
    Last edited by bas1 (2010-09-30 01:59:47)

  • Kernel 3.16 webcam shows black image

    I have a Cisco VTCamera3 (a rebadged Logitech Quickcam Pro 9000). After upgrading to 3.16 the camera always displays a black picture. I tried downgrading to 3.15.8-1 and it functioned properly. Some debug info on 3.16:
    lsusb:
    Bus 003 Device 003: ID 046d:0822 Logitech, Inc.
    Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 004 Device 002: ID 03eb:21fe Atmel Corp.
    Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 002 Device 002: ID 046d:c52e Logitech, Inc. MK260 Wireless Combo Receiver
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.16.1-1-ARCH (nobody@var-lib-archbuild-testing-i686-tobias) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Thu Aug 14 07:48:39 CEST 2014
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000d0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f6affff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000003f6b0000-0x000000003f6bbfff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000003f6bc000-0x000000003f6befff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000003f6bf000-0x000000003fffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] SMBIOS 2.5 present.
    [ 0.000000] DMI: CompuLab SBC-FITPC2/SBC-FITPC2, BIOS NAPA0001.86C.0000.D.0912241315 12/24/2009
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] e820: last_pfn = 0x3f6b0 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-DFFFF uncachable
    [ 0.000000] E0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask 0C0000000 write-back
    [ 0.000000] 1 base 03F700000 mask 0FFF00000 uncachable
    [ 0.000000] 2 base 03F800000 mask 0FF800000 uncachable
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [mem 0x000f85f0-0x000f85ff] mapped at [c00f85f0]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
    [ 0.000000] Base memory trampoline at [c008c000] 8c000 size 16384
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
    [ 0.000000] [mem 0x37000000-0x373fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
    [ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
    [ 0.000000] [mem 0x00100000-0x003fffff] page 4k
    [ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
    [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
    [ 0.000000] BRK [0x01798000, 0x01798fff] PGTABLE
    [ 0.000000] RAMDISK: [mem 0x37972000-0x37cb0fff]
    [ 0.000000] Allocated new RAMDISK: [mem 0x374bf000-0x377fd67b]
    [ 0.000000] Move RAMDISK from [mem 0x37972000-0x37cb067b] to [mem 0x374bf000-0x377fd67b]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x000F85C0 000024 (v02 PTLTD )
    [ 0.000000] ACPI: XSDT 0x3F6B7D4B 000064 (v01 PTLTD ? XSDT 06040000 LTP 00000000)
    [ 0.000000] ACPI: FACP 0x3F6BBDB0 0000F4 (v03 INTEL POULSBO 06040000 INTC 00000032)
    [ 0.000000] ACPI: DSDT 0x3F6B85A4 003788 (v01 INTEL POULSBO 06040000 INTL 20050624)
    [ 0.000000] ACPI: FACS 0x3F6BEFC0 000040
    [ 0.000000] ACPI: HPET 0x3F6BBEA4 000038 (v01 INTEL POULSBO 06040000 INTC 00000032)
    [ 0.000000] ACPI: MCFG 0x3F6BBEDC 00003C (v01 INTEL POULSBO 06040000 INTC 00000032)
    [ 0.000000] ACPI: TCPA 0x3F6BBF18 000032 (v01 PTLTD CALISTGA 06040000 PTL 00000001)
    [ 0.000000] ACPI: TMOR 0x3F6BBF4A 000026 (v01 PTLTD 06040000 PTL 00000003)
    [ 0.000000] ACPI: APIC 0x3F6BBF70 000068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
    [ 0.000000] ACPI: BOOT 0x3F6BBFD8 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
    [ 0.000000] ACPI: SSDT 0x3F6B7DAF 0004DC (v02 PmRef CpuPm 00003000 INTL 20050624)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 126MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] BRK [0x01799000, 0x01799fff] PGTABLE
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] Normal [mem 0x01000000-0x377fdfff]
    [ 0.000000] HighMem [mem 0x377fe000-0x3f6affff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0008ffff]
    [ 0.000000] node 0: [mem 0x00100000-0x3f6affff]
    [ 0.000000] On node 0 totalpages: 259647
    [ 0.000000] free_area_init_node: node 0, pgdat c161c180, node_mem_map f6ccf020
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3983 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 223230 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 254 pages used for memmap
    [ 0.000000] HighMem zone: 32434 pages, LIFO batch:7
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x00090000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000cffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000d0000-0x000fffff]
    [ 0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 14 pages/cpu @f6cad000 s33344 r0 d24000 u57344
    [ 0.000000] pcpu-alloc: s33344 r0 d24000 u57344 alloc=14*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257871
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=070ce34b-ebf5-4f85-8483-3a7a20f370d3 rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] allocated 2078072 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0003f6b0)
    [ 0.000000] Initializing Movable for node 0 (00000000:00000000)
    [ 0.000000] Memory: 1016312K/1038588K available (4512K kernel code, 483K rwdata, 1328K rodata, 568K init, 824K bss, 22276K reserved, 129736K highmem)
    [ 0.000000] virtual kernel memory layout:
    fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc1630000 - 0xc16be000 ( 568 kB)
    .data : 0xc146843a - 0xc162ec80 (1818 kB)
    .text : 0xc1000000 - 0xc146843a (4513 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    [ 0.000000] NR_IRQS:2304 nr_irqs:512 16
    [ 0.000000] CPU 0 irqstacks, hard=f6408000 soft=f640a000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 1596.099 MHz processor
    [ 0.003351] Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.20 BogoMIPS (lpj=5320330)
    [ 0.003361] pid_max: default: 32768 minimum: 301
    [ 0.003381] ACPI: Core revision 20140424
    [ 0.013368] ACPI: All ACPI Tables successfully acquired
    [ 0.014588] Security Framework initialized
    [ 0.014600] Yama: becoming mindful.
    [ 0.014633] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [ 0.014640] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [ 0.015241] Initializing cgroup subsys memory
    [ 0.015306] Initializing cgroup subsys devices
    [ 0.015330] Initializing cgroup subsys freezer
    [ 0.015341] Initializing cgroup subsys net_cls
    [ 0.015356] Initializing cgroup subsys blkio
    [ 0.015413] CPU: Physical Processor ID: 0
    [ 0.015418] CPU: Processor Core ID: 0
    [ 0.015428] mce: CPU supports 5 MCE banks
    [ 0.015446] CPU0: Thermal monitoring enabled (TM1)
    [ 0.015467] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
    tlb_flushall_shift: 6
    [ 0.015645] Freeing SMP alternatives memory: 16K (c16be000 - c16c2000)
    [ 0.016980] ftrace: allocating 19356 entries in 38 pages
    [ 0.030202] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.030592] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.063850] smpboot: CPU0: Intel(R) Atom(TM) CPU Z530 @ 1.60GHz (fam: 06, model: 1c, stepping: 02)
    [ 0.066666] Performance Events: PEBS fmt0+, LBR disabled due to erratumAtom events, Intel PMU driver.
    [ 0.066666] ... version: 3
    [ 0.066666] ... bit width: 40
    [ 0.066666] ... generic registers: 2
    [ 0.066666] ... value mask: 000000ffffffffff
    [ 0.066666] ... max period: 000000007fffffff
    [ 0.066666] ... fixed-purpose events: 3
    [ 0.066666] ... event mask: 0000000700000003
    [ 0.090228] CPU 1 irqstacks, hard=f651a000 soft=f651c000
    [ 0.090235] x86: Booting SMP configuration:
    [ 0.090240] .... node #0, CPUs: #1
    [ 0.006666] Initializing CPU#1
    [ 0.103539] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.103581] x86: Booted up 1 node, 2 CPUs
    [ 0.103588] smpboot: Total of 2 processors activated (6386.41 BogoMIPS)
    [ 0.104339] devtmpfs: initialized
    [ 0.104339] PM: Registering ACPI NVS region [mem 0x3f6bc000-0x3f6befff] (12288 bytes)
    [ 0.108614] pinctrl core: initialized pinctrl subsystem
    [ 0.108714] RTC time: 7:33:09, date: 08/15/14
    [ 0.108880] NET: Registered protocol family 16
    [ 0.109277] cpuidle: using governor ladder
    [ 0.109285] cpuidle: using governor menu
    [ 0.109453] ACPI: bus type PCI registered
    [ 0.109462] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.109717] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.109726] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.109730] PCI: Using MMCONFIG for extended config space
    [ 0.109734] PCI: Using configuration type 1 for base access
    [ 0.120624] ACPI: Added _OSI(Module Device)
    [ 0.120632] ACPI: Added _OSI(Processor Device)
    [ 0.120637] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.120642] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.125588] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.126377] ACPI: Dynamic OEM Table Load:
    [ 0.126393] ACPI: SSDT 0xF65D8800 000245 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
    [ 0.127453] ACPI: Dynamic OEM Table Load:
    [ 0.127465] ACPI: SSDT 0xF64B3300 0000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
    [ 0.333424] ACPI: Interpreter enabled
    [ 0.333445] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
    [ 0.333457] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
    [ 0.333495] ACPI: (supports S0 S3 S4 S5)
    [ 0.333500] ACPI: Using IOAPIC for interrupt routing
    [ 0.333591] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.335545] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [ 0.345331] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.345349] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.345365] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
    [ 0.345666] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c0000-0x000dffff] (conflicts with reserved [mem 0x000d0000-0x000fffff])
    [ 0.346080] PCI host bridge to bus 0000:00
    [ 0.346090] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.346098] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.346104] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.346111] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.346118] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff]
    [ 0.346124] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
    [ 0.346131] pci_bus 0000:00: root bus resource [mem 0x3f800000-0xfebfffff]
    [ 0.346154] pci 0000:00:00.0: [8086:8100] type 00 class 0x060000
    [ 0.346457] pci 0000:00:02.0: [8086:8108] type 00 class 0x030000
    [ 0.346488] pci 0000:00:02.0: reg 0x10: [mem 0xd0080000-0xd00fffff]
    [ 0.346503] pci 0000:00:02.0: reg 0x14: [io 0x1800-0x1807]
    [ 0.346519] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff]
    [ 0.346534] pci 0000:00:02.0: reg 0x1c: [mem 0xd0040000-0xd007ffff]
    [ 0.346889] pci 0000:00:1b.0: [8086:811b] type 00 class 0x040300
    [ 0.346918] pci 0000:00:1b.0: reg 0x10: [mem 0xd0010000-0xd0013fff 64bit]
    [ 0.347015] pci 0000:00:1b.0: PME# supported from D0 D3hot
    [ 0.347276] pci 0000:00:1c.0: [8086:8110] type 01 class 0x060400
    [ 0.347374] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.347635] pci 0000:00:1c.1: [8086:8112] type 01 class 0x060400
    [ 0.347731] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.347996] pci 0000:00:1d.0: [8086:8114] type 00 class 0x0c0300
    [ 0.348049] pci 0000:00:1d.0: reg 0x20: [io 0x1820-0x183f]
    [ 0.348215] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.348382] pci 0000:00:1d.1: [8086:8115] type 00 class 0x0c0300
    [ 0.348435] pci 0000:00:1d.1: reg 0x20: [io 0x1840-0x185f]
    [ 0.348591] pci 0000:00:1d.1: System wakeup disabled by ACPI
    [ 0.348752] pci 0000:00:1d.2: [8086:8116] type 00 class 0x0c0300
    [ 0.348804] pci 0000:00:1d.2: reg 0x20: [io 0x1860-0x187f]
    [ 0.348963] pci 0000:00:1d.2: System wakeup disabled by ACPI
    [ 0.349140] pci 0000:00:1d.7: [8086:8117] type 00 class 0x0c0320
    [ 0.349176] pci 0000:00:1d.7: reg 0x10: [mem 0xd0014000-0xd00143ff]
    [ 0.349312] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.349417] pci 0000:00:1d.7: System wakeup disabled by ACPI
    [ 0.349582] pci 0000:00:1e.0: [8086:811c] type 00 class 0x080501
    [ 0.349603] pci 0000:00:1e.0: reg 0x10: [mem 0xd0014400-0xd00144ff]
    [ 0.349876] pci 0000:00:1e.1: [8086:811d] type 00 class 0x080501
    [ 0.349898] pci 0000:00:1e.1: reg 0x10: [mem 0xd0014800-0xd00148ff]
    [ 0.350198] pci 0000:00:1f.0: [8086:8119] type 00 class 0x060100
    [ 0.350489] pci 0000:00:1f.1: [8086:811a] type 00 class 0x010180
    [ 0.350541] pci 0000:00:1f.1: reg 0x20: [io 0x1810-0x181f]
    [ 0.350566] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
    [ 0.350572] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
    [ 0.350579] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
    [ 0.350585] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
    [ 0.350978] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
    [ 0.351011] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
    [ 0.351050] pci 0000:02:00.0: reg 0x18: [mem 0xd0404000-0xd0404fff 64bit pref]
    [ 0.351076] pci 0000:02:00.0: reg 0x20: [mem 0xd0400000-0xd0403fff 64bit pref]
    [ 0.351096] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
    [ 0.351212] pci 0000:02:00.0: supports D1 D2
    [ 0.351218] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.351286] pci 0000:02:00.0: System wakeup disabled by ACPI
    [ 0.356707] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.356718] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.356729] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd04fffff pref]
    [ 0.356955] acpiphp: Slot [1] registered
    [ 0.356996] pci 0000:03:00.0: [1814:3090] type 00 class 0x028000
    [ 0.357027] pci 0000:03:00.0: reg 0x10: [mem 0xd0100000-0xd010ffff]
    [ 0.357234] pci 0000:03:00.0: System wakeup disabled by ACPI
    [ 0.363366] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 0.363379] pci 0000:00:1c.1: bridge window [mem 0xd0100000-0xd01fffff]
    [ 0.363409] pci_bus 0000:00: on NUMA node 0
    [ 0.363678] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
    [ 0.363843] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.364007] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
    [ 0.364168] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
    [ 0.364330] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 0.364493] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 0.364654] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 *4 5 6 7 10 12 14 15)
    [ 0.364815] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.365795] ACPI: Enabled 6 GPEs in block 00 to 1F
    [ 0.365921] ACPI : EC: GPE = 0xd, I/O: command/status = 0x66, data = 0x62
    [ 0.366121] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.366121] vgaarb: loaded
    [ 0.366121] vgaarb: bridge control possible 0000:00:02.0
    [ 0.366121] PCI: Using ACPI for IRQ routing
    [ 0.374482] PCI: pci_cache_line_size set to 64 bytes
    [ 0.374548] Expanded resource reserved due to conflict with PCI Bus 0000:00
    [ 0.374555] e820: reserve RAM buffer [mem 0x3f6b0000-0x3fffffff]
    [ 0.374975] NetLabel: Initializing
    [ 0.374981] NetLabel: domain hash size = 128
    [ 0.374984] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.375016] NetLabel: unlabeled traffic allowed by default
    [ 0.375083] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.375092] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.375103] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [ 0.376726] Switched to clocksource hpet
    [ 0.393251] pnp: PnP ACPI init
    [ 0.393321] ACPI: bus type PNP registered
    [ 0.393841] system 00:00: [mem 0xfd000000-0xfd003fff] has been reserved
    [ 0.393851] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.393859] system 00:00: [mem 0xfed00000-0xfed3ffff] could not be reserved
    [ 0.393866] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.393873] system 00:00: [mem 0xfed45000-0xfed4bfff] has been reserved
    [ 0.393885] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.394501] system 00:01: [io 0x0680-0x069f] has been reserved
    [ 0.394510] system 00:01: [io 0x8080] has been reserved
    [ 0.394518] system 00:01: [io 0x1000-0x107f] could not be reserved
    [ 0.394526] system 00:01: [io 0x1180-0x11bf] has been reserved
    [ 0.394533] system 00:01: [io 0x1640-0x164f] has been reserved
    [ 0.394542] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.394699] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.394731] pnp: PnP ACPI: found 3 devices
    [ 0.394735] ACPI: bus type PNP unregistered
    [ 0.438276] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x001fffff] to [bus 02] add_size 400000
    [ 0.438291] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
    [ 0.438300] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff pref] to [bus 03] add_size 200000
    [ 0.438319] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x001fffff] get_res_add_size add_size 400000
    [ 0.438327] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff pref] get_res_add_size add_size 200000
    [ 0.438334] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.438351] pci 0000:00:1c.0: BAR 14: assigned [mem 0x40000000-0x404fffff]
    [ 0.438361] pci 0000:00:1c.1: BAR 15: assigned [mem 0x40500000-0x406fffff pref]
    [ 0.438372] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
    [ 0.438382] pci 0000:02:00.0: BAR 6: assigned [mem 0xd0420000-0xd043ffff pref]
    [ 0.438389] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.438397] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.438409] pci 0000:00:1c.0: bridge window [mem 0x40000000-0x404fffff]
    [ 0.438418] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd04fffff pref]
    [ 0.438428] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 0.438436] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
    [ 0.438446] pci 0000:00:1c.1: bridge window [mem 0xd0100000-0xd01fffff]
    [ 0.438455] pci 0000:00:1c.1: bridge window [mem 0x40500000-0x406fffff pref]
    [ 0.438467] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.438474] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.438480] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.438487] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000effff]
    [ 0.438493] pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff]
    [ 0.438500] pci_bus 0000:00: resource 9 [mem 0x3f800000-0xfebfffff]
    [ 0.438507] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.438513] pci_bus 0000:02: resource 1 [mem 0x40000000-0x404fffff]
    [ 0.438520] pci_bus 0000:02: resource 2 [mem 0xd0400000-0xd04fffff pref]
    [ 0.438527] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
    [ 0.438533] pci_bus 0000:03: resource 1 [mem 0xd0100000-0xd01fffff]
    [ 0.438540] pci_bus 0000:03: resource 2 [mem 0x40500000-0x406fffff pref]
    [ 0.438612] NET: Registered protocol family 2
    [ 0.439143] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
    [ 0.439193] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.439252] TCP: Hash tables configured (established 8192 bind 8192)
    [ 0.439314] TCP: reno registered
    [ 0.439321] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.439339] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.439476] NET: Registered protocol family 1
    [ 0.439528] pci 0000:00:02.0: Boot video device
    [ 0.441145] PCI: CLS 64 bytes, default 64
    [ 0.441295] Unpacking initramfs...
    [ 0.602517] Freeing initrd memory: 3324K (f74bf000 - f77fe000)
    [ 0.602615] Simple Boot Flag at 0x36 set to 0x1
    [ 0.603079] apm: BIOS not found.
    [ 0.603206] Scanning for low memory corruption every 60 seconds
    [ 0.604344] futex hash table entries: 512 (order: 3, 32768 bytes)
    [ 0.605195] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.611989] zbud: loaded
    [ 0.612366] VFS: Disk quotas dquot_6.5.2
    [ 0.612508] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.613054] msgmni has been set to 1738
    [ 0.613245] Key type big_key registered
    [ 0.613664] bounce: pool size: 64 pages
    [ 0.613814] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.613974] io scheduler noop registered
    [ 0.613983] io scheduler deadline registered
    [ 0.614190] io scheduler cfq registered (default)
    [ 0.615077] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.615147] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.615277] vesafb: mode is 1024x768x32, linelength=4096, pages=0
    [ 0.615281] vesafb: scrolling: redraw
    [ 0.615287] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.615322] vesafb: framebuffer at 0x3f800000, mapped to 0xf8080000, using 3072k, total 3072k
    [ 0.658750] Console: switching to colour frame buffer device 128x48
    [ 0.701730] fb0: VESA VGA frame buffer device
    [ 0.701813] intel_idle: MWAIT substates: 0x3020220
    [ 0.701830] intel_idle: v0.4 model 0x1C
    [ 0.701835] intel_idle: lapic_timer_reliable_states 0x2
    [ 0.701850] tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2
    [ 0.702245] GHES: HEST is not enabled!
    [ 0.702301] isapnp: Scanning for PnP cards...
    [ 1.015472] isapnp: No Plug & Play device found
    [ 1.015659] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.017319] rtc_cmos 00:02: RTC can wake from S4
    [ 1.017616] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 1.017665] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 1.017789] ledtrig-cpu: registered to indicate activity on CPUs
    [ 1.018106] TCP: cubic registered
    [ 1.018654] NET: Registered protocol family 10
    [ 1.019221] NET: Registered protocol family 17
    [ 1.019774] Using IPI No-Shortcut mode
    [ 1.020264] registered taskstats version 1
    [ 1.021107] Magic number: 10:907:571
    [ 1.021227] rtc_cmos 00:02: setting system clock to 2014-08-15 07:33:10 UTC (1408087990)
    [ 1.021447] PM: Hibernation image not present or could not be loaded.
    [ 1.021963] Freeing unused kernel memory: 568K (c1630000 - c16be000)
    [ 1.022039] Write protecting the kernel text: 4516k
    [ 1.022118] Write protecting the kernel read-only data: 1332k
    [ 1.042672] random: systemd-tmpfile urandom read with 1 bits of entropy available
    [ 1.047350] systemd-udevd[47]: starting version 215
    [ 1.128087] ACPI: bus type USB registered
    [ 1.128193] usbcore: registered new interface driver usbfs
    [ 1.128242] usbcore: registered new interface driver hub
    [ 1.131091] usbcore: registered new device driver usb
    [ 1.136802] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.138463] uhci_hcd: USB Universal Host Controller Interface driver
    [ 1.138464] sdhci: Secure Digital Host Controller Interface driver
    [ 1.138470] sdhci: Copyright(c) Pierre Ossman
    [ 1.138952] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 1.138992] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    [ 1.139014] uhci_hcd 0000:00:1d.0: detected 2 ports
    [ 1.139096] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
    [ 1.140072] hub 1-0:1.0: USB hub found
    [ 1.140115] hub 1-0:1.0: 2 ports detected
    [ 1.141184] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 1.141220] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    [ 1.141244] uhci_hcd 0000:00:1d.1: detected 2 ports
    [ 1.141336] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
    [ 1.142401] hub 2-0:1.0: USB hub found
    [ 1.142448] hub 2-0:1.0: 2 ports detected
    [ 1.142849] ehci-pci: EHCI PCI platform driver
    [ 1.143132] sdhci-pci 0000:00:1e.0: SDHCI controller found [8086:811c] (rev 7)
    [ 1.143593] mmc0: no vqmmc regulator found
    [ 1.143603] mmc0: no vmmc regulator found
    [ 1.144215] mmc0: SDHCI controller on PCI [0000:00:1e.0] using DMA
    [ 1.144342] sdhci-pci 0000:00:1e.1: SDHCI controller found [8086:811d] (rev 7)
    [ 1.144775] mmc1: no vqmmc regulator found
    [ 1.144785] mmc1: no vmmc regulator found
    [ 1.149171] mmc1: SDHCI controller on PCI [0000:00:1e.1] using DMA
    [ 1.150518] SCSI subsystem initialized
    [ 1.150786] ehci-pci 0000:00:1d.7: EHCI Host Controller
    [ 1.150821] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 3
    [ 1.150868] ehci-pci 0000:00:1d.7: debug port 1
    [ 1.154859] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
    [ 1.154942] ehci-pci 0000:00:1d.7: irq 21, io mem 0xd0014000
    [ 1.157028] libata version 3.00 loaded.
    [ 1.163430] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 1.165088] hub 3-0:1.0: USB hub found
    [ 1.165478] hub 3-0:1.0: 8 ports detected
    [ 1.190391] hub 1-0:1.0: USB hub found
    [ 1.190446] hub 1-0:1.0: 2 ports detected
    [ 1.213717] hub 2-0:1.0: USB hub found
    [ 1.213767] hub 2-0:1.0: 2 ports detected
    [ 1.215098] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 1.215132] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    [ 1.215156] uhci_hcd 0000:00:1d.2: detected 2 ports
    [ 1.215255] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
    [ 1.216331] hub 4-0:1.0: USB hub found
    [ 1.216380] hub 4-0:1.0: 2 ports detected
    [ 1.217636] pata_sch 0000:00:1f.1: version 0.2
    [ 1.227175] scsi0 : pata_sch
    [ 1.232071] scsi1 : pata_sch
    [ 1.232428] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
    [ 1.232438] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
    [ 1.390862] ata1.00: ATA-8: WDC WD10JPVT-75A1YT0, 01.01A01, max UDMA/133
    [ 1.390872] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 1.403865] ata1.00: configured for UDMA/100
    [ 1.404180] scsi 0:0:0:0: Direct-Access ATA WDC WD10JPVT-75A 1A01 PQ: 0 ANSI: 5
    [ 1.581479] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 1.581491] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [ 1.581771] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.581781] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.581883] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.664161] sda: sda1 sda2 sda3 sda4
    [ 1.665842] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.730112] usb 3-5: new high-speed USB device number 3 using ehci-pci
    [ 2.217577] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.363429] usb 2-2: new full-speed USB device number 2 using uhci_hcd
    [ 2.770100] usb 4-2: new low-speed USB device number 2 using uhci_hcd
    [ 3.227031] random: nonblocking pool is initialized
    [ 4.449504] systemd[1]: Cannot add dependency job for unit webmin.service, ignoring: Unit webmin.service failed to load: No such file or directory.
    [ 4.894931] EXT4-fs (sda1): re-mounted. Opts: (null)
    [ 5.277820] systemd-udevd[134]: starting version 215
    [ 6.002648] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
    [ 6.002665] ACPI: Power Button [PWRB]
    [ 6.003023] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    [ 6.003036] ACPI: Power Button [PWRF]
    [ 6.003053] ACPI Error: Could not enable PowerButton event (20140424/evxfevnt-212)
    [ 6.003066] ACPI Warning: Could not enable fixed event - PowerButton (2) (20140424/evxface-643)
    [ 6.030237] button: probe of LNXPWRBN:00 failed with error -22
    [ 6.033338] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 6.115121] ACPI: Battery Slot [BAT0] (battery absent)
    [ 6.115639] ACPI: Battery Slot [BAT1] (battery absent)
    [ 6.115801] ACPI: Battery Slot [BAT2] (battery absent)
    [ 6.118719] ACPI: AC Adapter [ADP1] (on-line)
    [ 6.213331] thermal LNXTHERM:00: registered as thermal_zone0
    [ 6.213438] ACPI: Thermal Zone [TZ00] (0 C)
    [ 6.214248] ACPI: Invalid active0 threshold
    [ 6.215000] thermal LNXTHERM:01: registered as thermal_zone1
    [ 6.215009] ACPI: Thermal Zone [TZ01] (0 C)
    [ 6.253463] input: PC Speaker as /devices/platform/pcspkr/input/input2
    [ 6.404542] Linux agpgart interface v0.103
    [ 6.440752] microcode: CPU0 sig=0x106c2, pf=0x1, revision=0x211
    [ 6.484136] microcode: CPU1 sig=0x106c2, pf=0x1, revision=0x211
    [ 6.484425] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 6.841436] lirc_dev: IR Remote Control driver registered, major 251
    [ 6.894503] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 6.894542] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 6.894948] r8169 0000:02:00.0: irq 40 for MSI/MSI-X
    [ 6.895707] r8169 0000:02:00.0 eth0: RTL8168d/8111d at 0xf8010000, 00:01:c0:07:09:e1, XID 081000c0 IRQ 40
    [ 6.895721] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 6.931838] media: Linux media interface: v0.10
    [ 6.941713] [drm] Initialized drm 1.1.0 20060810
    [ 6.980804] Linux video capture interface: v2.00
    [ 7.085556] hidraw: raw HID events driver (C) Jiri Kosina
    [ 7.147784] systemd-udevd[136]: renamed network interface eth0 to enp2s0
    [ 7.207476] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 7.207539] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [ 7.210858] usbcore: registered new interface driver usbhid
    [ 7.210868] usbhid: USB HID core driver
    [ 7.276297] cfg80211: Calling CRDA to update world regulatory domain
    [ 7.281908] uvcvideo: Found UVC 1.00 device Cisco VTCamera3 (046d:0822)
    [ 7.293193] lirc_igorplugusb: module is from the staging directory, the quality is unknown, you have been warned.
    [ 7.294637] lirc_igorplugusb 4-2:1.0: lirc_dev: driver lirc_igorplugusb registered at minor = 0
    [ 7.297214] input: Cisco VTCamera3 as /devices/pci0000:00/0000:00:1d.7/usb3/3-5/3-5:1.0/input/input3
    [ 7.298031] usbcore: registered new interface driver uvcvideo
    [ 7.298040] USB Video Class driver (1.1.1)
    [ 7.316174] lirc_igorplugusb[2]: Cesko AVR309:USB to UART protocol converter (simple) on usb4:2
    [ 7.320869] acpi device:04: registered as cooling_device2
    [ 7.321309] usbcore: registered new interface driver lirc_igorplugusb
    [ 7.326089] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/0003:046D:C52E.0001/input/input4
    [ 7.330340] hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2/input0
    [ 7.338490] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.1/0003:046D:C52E.0002/input/input5
    [ 7.339465] hid-generic 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2/input1
    [ 7.374033] acpi device:05: registered as cooling_device3
    [ 7.374687] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
    [ 7.377741] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 7.377753] [drm] No driver support for vblank timestamp query.
    [ 7.381109] mousedev: PS/2 mouse device common for all mice
    [ 7.411410] gma500 0000:00:02.0: Found no modes on the lvds, ignoring the LVDS
    [ 7.526900] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3071, rev 0213 detected
    [ 7.537972] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
    [ 7.593300] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [ 7.623731] systemd-udevd[139]: renamed network interface wlan0 to wls1
    [ 7.644147] gma500 0000:00:02.0: trying to get vblank count for disabled pipe 1
    [ 7.644846] gma500 0000:00:02.0: trying to get vblank count for disabled pipe 1
    [ 7.751280] usb 3-5: Warning! Unlikely big volume range (=6400), cval->res is probably wrong.
    [ 7.751293] usb 3-5: [5] FU [Mic Capture Volume] ch = 1, val = 1536/7936/1
    [ 7.752268] usbcore: registered new interface driver snd-usb-audio
    [ 8.151377] checking generic (3f800000 300000) vs hw (3f800000 7bf000)
    [ 8.151388] fb: switching to psbdrmfb from VESA VGA
    [ 8.151461] Console: switching to colour dummy device 80x25
    [ 8.152037] fbcon: psbdrmfb (fb0) is primary device
    [ 8.280125] Adding 1000444k swap on /dev/sda2. Priority:-1 extents:1 across:1000444k FS
    [ 8.372453] Console: switching to colour frame buffer device 200x56
    [ 8.451827] gma500 0000:00:02.0: fb0: psbdrmfb frame buffer device
    [ 8.451834] gma500 0000:00:02.0: registered panic notifier
    [ 8.470079] [drm] Initialized gma500 1.0.0 20140314 for 0000:00:02.0 on minor 0
    [ 8.596213] sound hdaudioC1D0: ALC662 rev1: SKU not ready 0x411111f0
    [ 8.596582] sound hdaudioC1D0: autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
    [ 8.596594] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 8.596603] sound hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
    [ 8.596611] sound hdaudioC1D0: mono: mono_out=0x0
    [ 8.596619] sound hdaudioC1D0: dig-out=0x1e/0x0
    [ 8.596625] sound hdaudioC1D0: inputs:
    [ 8.596636] sound hdaudioC1D0: Front Mic=0x19
    [ 8.596645] sound hdaudioC1D0: Rear Mic=0x18
    [ 8.596654] sound hdaudioC1D0: Line=0x1a
    [ 9.039493] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [ 9.118207] systemd-journald[115]: Received request to flush runtime journal from PID 1
    [ 9.636740] sound hdaudioC1D0: hda-codec: out of range cmd 0:20:400:ffff7fff
    [ 9.648467] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input7
    [ 9.650192] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
    [ 9.650698] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
    [ 9.651188] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
    [ 9.652556] input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
    [ 9.653112] input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
    [ 9.653665] input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
    [ 9.654165] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
    [ 10.708548] ip_tables: (C) 2000-2006 Netfilter Core Team
    [ 10.755946] ip6_tables: (C) 2000-2006 Netfilter Core Team
    [ 10.871041] tun: Universal TUN/TAP device driver, 1.6
    [ 10.871052] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
    [ 10.895529] nf_conntrack version 0.5.0 (15940 buckets, 63760 max)
    [ 11.861428] r8169 0000:02:00.0 enp2s0: link down
    [ 11.861445] r8169 0000:02:00.0 enp2s0: link down
    [ 11.861508] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
    [ 14.004913] r8169 0000:02:00.0 enp2s0: link up
    [ 14.004936] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
    Please help.

    R00KIE wrote:
    It seems this was reported upstream(??).
    http://sourceforge.net/p/linux-uvc/mail … nth=201408
    Nothing new on linux-uvc-devel mailing list since Aug 7.
    I followed some other instructions, attempted to adjust the exposure value but the problem persisted:
    http://b.wardje.eu/2012/01/webcam-shows … linux.html
    Last edited by albertnguyen (2014-08-22 09:09:48)

  • Upgrading Oracle Linux with Oracle Unbreakable Linux Kernel

    Hi all.
    I'd like to upgrade an Oracle Linux OS with unbreakable linux kernel.
    Current version is :
    [oracle@union ~]$ uname -r
    2.6.18-164.el5PAE
    Which steps needs to be performed?.
    I know i must be at 2.6.32. Also Unbreakable Enterprise Kernel is available for x86-64 servers.
    Q: How do i know if my distro is x86 or x86-64?
    Regards, Luis ...!

    Hi Dude... what's a pae kernel?
    [oracle@union ART0]$ uname -a
    Linux union.rioturbio.com.ve 2.6.18-164.el5PAE #1 SMP Thu Sep 3 02:28:20 EDT 2009 i686 i686 i386 GNU/Linux
    [oracle@union ART0]$
    No x86_64 x86_64 x86_64 GNU/Linux
    Also:
    [oracle@union ART0]$ grep flags /proc/cpuinfo |grep lm
    flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp lm constanttsc ida nonstoptsc pni monitor ds_cpl vmx est tm2 cx16 xtpr popcnt lahf_lm [8]
    flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp lm constant_tsc ida nonstop_tsc pni monitor ds_cpl vmx est tm2 cx16 xtpr popcnt lahf_lm [8]
    flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp lm constant_tsc ida nonstop_tsc pni monitor ds_cpl vmx est tm2 cx16 xtpr popcnt lahf_lm [8]
    flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp lm constant_tsc ida nonstop_tsc pni monitor ds_cpl vmx est tm2 cx16 xtpr popcnt lahf_lm [8]
    flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp lm constant_tsc ida nonstop_tsc pni monitor ds_cpl vmx est tm2 cx16 xtpr popcnt lahf_lm [8]
    flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp lm constant_tsc ida nonstop_tsc pni monitor ds_cpl vmx est tm2 cx16 xtpr popcnt lahf_lm [8]
    flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp lm constant_tsc ida nonstop_tsc pni monitor ds_cpl vmx est tm2 cx16 xtpr popcnt lahf_lm [8]
    flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp lm constant_tsc ida nonstop_tsc pni monitor ds_cpl vmx est tm2 cx16 xtpr popcnt lahf_lm [8]
    [oracle@union ART0]$
    There is lm although....
    So i guess the installation is for 32bit.
    Do i need to download a 64bit distro?.

  • 64bit kernel with 32bit userspace + pacman integration

    There have been quite some questions about this topic. Sometimes leading even leading to frustration.
    Luckily, a nice writeup was made here with a nice addition to integrate this nicely here.
    Since there is no 32bit PAE kernel distributed by ArchLinux, using a 64bit kernel to enable NX is the only option. But since it only has 1G of memory, I do not wish to install a 64bit userspace + 32bit multilib.
    However, the *exact* steps have been quite a guess (and there is no wiki). That is why I'm writing this down.
    Let's start with the main configuration: pacman.conf
    We need to comment out the Architecture stanza. It's funky. Why? Because it actually has two unrelated purposes:
    As a documented feature, it provides protection against installing incorrect packages from another architecture
    The undocumented feature is the fact that it's literal value is used to replace '$arch' variables in repo URL's
    #Architecture = auto
    Syncing your local repo's just broke as '$arch' is no longer defined (try it now). I ditched /etc/pacman.d/mirrorlist and did this with my remote repo URL's:
    # custom repo for 64bit kernel
    [x86_64-kernel]
    Server = file:///home/$user/x86_64-kernel/
    [core]
    Server = http://ftp.nluug.nl/pub/os/Linux/distr/archlinux/core/os/i686
    [extra]
    Server = http://ftp.nluug.nl/pub/os/Linux/distr/archlinux/extra/os/i686
    [community]
    Server = http://ftp.nluug.nl/pub/os/Linux/distr/archlinux/community/os/i686
    Notice the new custom repo at the top of the file. Adapt your pacman.conf to contain this custom repo as well. Make sure you place it before the [core] repo or whatever other repo is providing your current kernel. The order matters.
    Furthermore, I rewrote the configuration file to not depend on variable substitution. One could argue that substituting $repo was unnecessary, but that does not really matter.
    Second, we setup the repository as a normal user. This can be done by a regular user in a safe way since the packages are all signed. So tampering with packages will not work. You could even dedicate a cron script with a dedicated user to this purpose (which is overkill).
    mkdir /home/$user/x86_64-kernel/
    Third, we use a small script to handle this custom repo. We place it at /home/$user/x86_64-kernel.sh . Subsitute the variable R_REPO with your favorite ArchLinux mirror. Make sure this URL points to a 64bit core repository.
    #!/bin/bash
    set -e
    set -o pipefail
    L_REPO=/home/$user/x86_64-kernel/
    R_REPO=http://ftp.nluug.nl/pub/os/Linux/distr/archlinux/core/os/x86_64/
    cd "$L_REPO"
    wget -nv "$R_REPO"/core.db -O core.db
    DESC=$(tar -tf core.db | grep '^linux-[0-9.-]*/desc$' | tail -n1)
    KERNELPKG=$(tar -xf core.db "$DESC" -O | grep -A1 '^%FILENAME%$' | tail -n1)
    if ! [[ -f "$KERNELPKG" ]]; then
    wget -nv "$R_REPO"/"$KERNELPKG"
    wget -nv "$R_REPO"/"$KERNELPKG".sig
    repo-add -q x86_64-kernel.db.tar.gz "$KERNELPKG"
    fi
    Now we are in fact done with the configuration. Substiture $user for your current user in all the sections and do the following:
    # create repo, this script also updates it when newer 64bit kernels arrive
    user $ bash /home/$user/x86_64-kernel.sh
    # update pacman's database
    root # pacman -Syy
    # install 64bit kernel
    root # pacman -S linux
    Pacman will be able to update this kernel as long as you run x86_64-kernel.sh every once in a while. I put it in XFCE session startup to run at each session login. You could do this with cron as well.
    I tested what hapenned if something went wrong with this repo. Pacman handles this very nicely actually. If you delete the repository, it will complain but not immediatly install the 32bit kernel given you have a 64bit already installed with this repo.
    A final note: If you build a lot of packages you could run into trouble. Someone in the forums made a good suggestion about that here -> ("init=linux32 /usr/lib/systemd/..."). This is a nice system-wide way to trick your buildsystem into believing it's a 32bit machine. This is sometimes required. I don't use as I don't have a problem with it. But keep this in mind.
    EDIT: Fixed update script to overwrite core.db and not create new ones like core.db.n .
    Last edited by Rexilion (2014-02-01 15:41:29)

    That is nice. Pity I did not know about this earlier. However, my method allows me to stick with the official packages. Thanks though!

  • Installation on a CPU without PAE

    Hi, is it possible to install ArchLinux on a system with a non-PAE cpu? (intel centrino dothan)

    karol wrote:I think so. There are some threads where users mention using such hardware:
    https://bbs.archlinux.org/viewtopic.php?id=87274
    https://bbs.archlinux.org/viewtopic.php?id=119731
    My hardware is an ancient Dell Latitude D800 which is running Linux Mint 11 with no pae kernel. I cannot upgrade because a pae kernel is required and it can't be run on it.

  • How do I/Do I need to fix "ata#.00 status { DRDY }" error?

    I've got an old server that used to be running windows that I have received to set up with linux for myself.  As I was working with it, I remembered that I had an old computer that I was just going to trash/give away anyways, of which many components would be better.  I have since set up a computer that's a mash of components between the two and everything seems to run perfectly except for one problem: I keep getting this error: (Where "#" is either 2, 3, or 4)
    ata#.00: exception Emask 0x50 SAct 0x0 SErr 0x48900 action 0x6 frozen
    ata#: SError: {UnrecovData HostInt 10B8B Handshk }
    ata#.00: failed command WRITE DMA
    ata#.00: cmd ca/00:88:9f:ca:8d/00:00:00:00:00/e8 tag 0 dma 69632 out
    res 50/00:88:9f:ca:8d/00:00:9e:c9:8d/e8 Emask 0x50 (AtA bus error)
    ata#.00: status: { DRDY }
    This error occurred once for each of the three numbers (which also happens to correspond to the three sata ports my HDs are plugged into): 2 and 3 while I was using dd to zero them (I zeroed all three but 4 didn't give any errors), and 4 just after installing grub onto a mirror raid composing of HDs 2 and 3. 
    All of the HDs originally used IDE so I used a converted to switch them (Model number CB-IS100)
    Additionally, when deconstructing the computers, one of the sata cables tore the first female connector out of the motherboard (hence why they start at 2), but while I know that's not preferable, I don't think it would cause this error.
    Finally, this motherboard was in a computer that had, as far as I could tell, a poor power supply that cause it to reboot when using a lot of CPU power.
    My question is really this: Will this cause any major problems or can I ignore it?  Also, is there anything I can do to fix it?
    This is my dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.11.6-1-ARCH (nobody@var-lib-archbuild-extra-i686-thomas) (gcc version 4.8.1 20130725 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Oct 19 00:29:46 CEST 2013
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000987ff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000098800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfedf7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000cfedf800-0x00000000cfedffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfee2fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000cfee3000-0x00000000cfeeffff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfefffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] SMBIOS 2.4 present.
    [ 0.000000] DMI: HP Pavilion 061 ER879AA-ABA M7457C/EMERY, BIOS 3.15 06/23/2006
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] e820: last_pfn = 0xcfedf max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-EFFFF uncachable
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0C0000000 mask FF0000000 write-back
    [ 0.000000] 3 base 0CFF00000 mask FFFF00000 uncachable
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [mem 0x000f5f80-0x000f5f8f] mapped at [c00f5f80]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x00bfffff]
    [ 0.000000] Base memory trampoline at [c0094000] 94000 size 16384
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
    [ 0.000000] [mem 0x37000000-0x373fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
    [ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
    [ 0.000000] [mem 0x00100000-0x003fffff] page 4k
    [ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
    [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
    [ 0.000000] BRK [0x00877000, 0x00877fff] PGTABLE
    [ 0.000000] RAMDISK: [mem 0x7ef2f000-0x7fffffff]
    [ 0.000000] Allocated new RAMDISK: [mem 0x3672d000-0x377fddaf]
    [ 0.000000] Move RAMDISK from [mem 0x7ef2f000-0x7ffffdaf] to [mem 0x3672d000-0x377fddaf]
    [ 0.000000] ACPI: RSDP 000f82e0 00014 (v00 HP-CPC)
    [ 0.000000] ACPI: RSDT cfee3040 00030 (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: FACP cfee30c0 00074 (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: DSDT cfee3180 0505D (v01 HP-CPC AWRDACPI 00001000 MSFT 0100000E)
    [ 0.000000] ACPI: FACS cfee0000 00040
    [ 0.000000] ACPI: MCFG cfee8340 0003C (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: APIC cfee8240 00084 (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 2438MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] BRK [0x00878000, 0x00878fff] PGTABLE
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] Normal [mem 0x01000000-0x377fdfff]
    [ 0.000000] HighMem [mem 0x377fe000-0xcfedefff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x00097fff]
    [ 0.000000] node 0: [mem 0x00100000-0xcfedefff]
    [ 0.000000] On node 0 totalpages: 851574
    [ 0.000000] free_area_init_node: node 0, pgdat c06d7740, node_mem_map f4d2d020
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3991 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 223230 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 4878 pages used for memmap
    [ 0.000000] HighMem zone: 624353 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x00098000-0x00098fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x00099000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
    [ 0.000000] e820: [mem 0xcff00000-0xefffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 14 pages/cpu @f4ce3000 s33536 r0 d23808 u57344
    [ 0.000000] pcpu-alloc: s33536 r0 d23808 u57344 alloc=14*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 849798
    [ 0.000000] Kernel command line: BOOT_IMAGE=boot/i686/vmlinuz archisobasedir=arch archisolabel=ARCH_201311 initrd=boot/i686/archiso.img
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] allocated 6813424 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:000cfedf)
    [ 0.000000] Memory: 3346976K/3406296K available (4262K kernel code, 426K rwdata, 1356K rodata, 608K init, 948K bss, 59320K reserved, 2497412K highmem)
    [ 0.000000] virtual kernel memory layout:
    fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc06e9000 - 0xc0781000 ( 608 kB)
    .data : 0xc0529d5e - 0xc06e8a00 (1787 kB)
    .text : 0xc0100000 - 0xc0529d5e (4263 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
    [ 0.000000] NR_IRQS:2304 nr_irqs:712 16
    [ 0.000000] CPU 0 irqstacks, hard=f4008000 soft=f400a000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 3000.893 MHz processor
    [ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 6004.86 BogoMIPS (lpj=10002976)
    [ 0.003342] pid_max: default: 32768 minimum: 301
    [ 0.003402] Security Framework initialized
    [ 0.003416] AppArmor: AppArmor disabled by boot time parameter
    [ 0.003418] Yama: becoming mindful.
    [ 0.003442] Mount-cache hash table entries: 512
    [ 0.003753] Initializing cgroup subsys memory
    [ 0.003767] Initializing cgroup subsys devices
    [ 0.003771] Initializing cgroup subsys freezer
    [ 0.003774] Initializing cgroup subsys net_cls
    [ 0.006675] Initializing cgroup subsys blkio
    [ 0.006723] CPU: Physical Processor ID: 0
    [ 0.006727] CPU: Processor Core ID: 0
    [ 0.006731] mce: CPU supports 4 MCE banks
    [ 0.006745] CPU0: Thermal monitoring enabled (TM1)
    [ 0.006763] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
    Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64
    tlb_flushall_shift: 6
    [ 0.006919] Freeing SMP alternatives memory: 20K (c0781000 - c0786000)
    [ 0.008197] ACPI: Core revision 20130517
    [ 0.012076] ACPI: All ACPI Tables successfully acquired
    [ 0.013370] ftrace: allocating 19099 entries in 38 pages
    [ 0.023450] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.023843] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.057502] smpboot: CPU0: Intel(R) Pentium(R) D CPU 3.00GHz (fam: 0f, model: 06, stepping: 02)
    [ 0.059999] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
    [ 0.059999] ... version: 0
    [ 0.059999] ... bit width: 40
    [ 0.059999] ... generic registers: 18
    [ 0.059999] ... value mask: 000000ffffffffff
    [ 0.059999] ... max period: 0000007fffffffff
    [ 0.059999] ... fixed-purpose events: 0
    [ 0.059999] ... event mask: 000000000003ffff
    [ 0.076727] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.083427] CPU 1 irqstacks, hard=f40ce000 soft=f40d8000
    [ 0.006666] Initializing CPU#1
    [ 0.083431] smpboot: Booting Node 0, Processors #1
    [ 0.096604] Brought up 2 CPUs
    [ 0.096610] smpboot: Total of 2 processors activated (12008.72 BogoMIPS)
    [ 0.096819] devtmpfs: initialized
    [ 0.096976] PM: Registering ACPI NVS region [mem 0xcfee0000-0xcfee2fff] (12288 bytes)
    [ 0.100507] RTC time: 20:09:02, date: 05/19/14
    [ 0.100577] NET: Registered protocol family 16
    [ 0.100840] ACPI: bus type PCI registered
    [ 0.100846] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.100944] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
    [ 0.100950] PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in E820
    [ 0.100954] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!)
    [ 0.100956] PCI: Using MMCONFIG for extended config space
    [ 0.100959] PCI: Using configuration type 1 for base access
    [ 0.102090] bio: create slab <bio-0> at 0
    [ 0.102090] ACPI: Added _OSI(Module Device)
    [ 0.102090] ACPI: Added _OSI(Processor Device)
    [ 0.102090] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.102090] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.103853] ACPI: EC: Look up EC in DSDT
    [ 0.110158] ACPI: Interpreter enabled
    [ 0.110189] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
    [ 0.110213] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.110217] ACPI: Using IOAPIC for interrupt routing
    [ 0.110269] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [ 0.110379] ACPI: No dock devices found.
    [ 0.118318] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.118328] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.118332] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.118461] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    [ 0.118466] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
    [ 0.118470] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [ 0.118474] acpi PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
    [ 0.118478] acpi PNP0A08:00: host bridge window [mem 0xcff00000-0xfebfffff] (ignored)
    [ 0.118481] PCI: root bus 00: using default resources
    [ 0.118486] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
    [ 0.118696] PCI host bridge to bus 0000:00
    [ 0.118703] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.118707] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
    [ 0.118710] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
    [ 0.118725] pci 0000:00:00.0: [8086:2770] type 00 class 0x060000
    [ 0.118895] pci 0000:00:01.0: [8086:2771] type 01 class 0x060400
    [ 0.118957] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.119125] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
    [ 0.119148] pci 0000:00:1b.0: reg 0x10: [mem 0xfdff8000-0xfdffbfff 64bit]
    [ 0.119231] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.119317] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.119384] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
    [ 0.119433] pci 0000:00:1d.0: reg 0x20: [io 0xff00-0xff1f]
    [ 0.119532] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.119597] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
    [ 0.119646] pci 0000:00:1d.1: reg 0x20: [io 0xfe00-0xfe1f]
    [ 0.119745] pci 0000:00:1d.1: System wakeup disabled by ACPI
    [ 0.119808] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
    [ 0.119857] pci 0000:00:1d.2: reg 0x20: [io 0xfd00-0xfd1f]
    [ 0.119955] pci 0000:00:1d.2: System wakeup disabled by ACPI
    [ 0.120030] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
    [ 0.120079] pci 0000:00:1d.3: reg 0x20: [io 0xfc00-0xfc1f]
    [ 0.120178] pci 0000:00:1d.3: System wakeup disabled by ACPI
    [ 0.120251] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
    [ 0.120273] pci 0000:00:1d.7: reg 0x10: [mem 0xfdfff000-0xfdfff3ff]
    [ 0.120360] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.120440] pci 0000:00:1d.7: System wakeup disabled by ACPI
    [ 0.120507] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
    [ 0.120640] pci 0000:00:1e.0: System wakeup disabled by ACPI
    [ 0.120712] pci 0000:00:1f.0: [8086:27b0] type 00 class 0x060100
    [ 0.120948] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
    [ 0.120966] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
    [ 0.120978] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
    [ 0.120990] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
    [ 0.121002] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
    [ 0.121014] pci 0000:00:1f.1: reg 0x20: [io 0xfb00-0xfb0f]
    [ 0.121164] pci 0000:00:1f.2: [8086:27c3] type 00 class 0x010400
    [ 0.121185] pci 0000:00:1f.2: reg 0x10: [io 0xfa00-0xfa07]
    [ 0.121196] pci 0000:00:1f.2: reg 0x14: [io 0xf900-0xf903]
    [ 0.121206] pci 0000:00:1f.2: reg 0x18: [io 0xf800-0xf807]
    [ 0.121217] pci 0000:00:1f.2: reg 0x1c: [io 0xf700-0xf703]
    [ 0.121228] pci 0000:00:1f.2: reg 0x20: [io 0xf600-0xf60f]
    [ 0.121238] pci 0000:00:1f.2: reg 0x24: [mem 0xfdffe000-0xfdffe3ff]
    [ 0.121284] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.121418] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
    [ 0.121478] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
    [ 0.121706] pci 0000:01:00.0: [10de:0a65] type 00 class 0x030000
    [ 0.121722] pci 0000:01:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
    [ 0.121737] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.121752] pci 0000:01:00.0: reg 0x1c: [mem 0xee000000-0xefffffff 64bit pref]
    [ 0.121762] pci 0000:01:00.0: reg 0x24: [io 0xdf00-0xdf7f]
    [ 0.121773] pci 0000:01:00.0: reg 0x30: [mem 0xfcf00000-0xfcf7ffff pref]
    [ 0.121887] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
    [ 0.121903] pci 0000:01:00.1: reg 0x10: [mem 0xfcffc000-0xfcffffff]
    [ 0.126691] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.126697] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    [ 0.126703] pci 0000:00:01.0: bridge window [mem 0xfb000000-0xfcffffff]
    [ 0.126709] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
    [ 0.126783] pci 0000:02:01.0: [1106:3044] type 00 class 0x0c0010
    [ 0.126806] pci 0000:02:01.0: reg 0x10: [mem 0xfdeff000-0xfdeff7ff]
    [ 0.126819] pci 0000:02:01.0: reg 0x14: [io 0xef00-0xef7f]
    [ 0.126902] pci 0000:02:01.0: supports D2
    [ 0.126905] pci 0000:02:01.0: PME# supported from D2 D3hot D3cold
    [ 0.126989] pci 0000:02:05.0: [10ec:8169] type 00 class 0x020000
    [ 0.127012] pci 0000:02:05.0: reg 0x10: [io 0xec00-0xecff]
    [ 0.127025] pci 0000:02:05.0: reg 0x14: [mem 0xfdefe000-0xfdefe0ff]
    [ 0.127075] pci 0000:02:05.0: reg 0x30: [mem 0xfdec0000-0xfdedffff pref]
    [ 0.127109] pci 0000:02:05.0: supports D1 D2
    [ 0.127113] pci 0000:02:05.0: PME# supported from D1 D2 D3hot D3cold
    [ 0.127196] pci 0000:02:08.0: [8086:27dc] type 00 class 0x020000
    [ 0.127218] pci 0000:02:08.0: reg 0x10: [mem 0xfdefd000-0xfdefdfff]
    [ 0.127230] pci 0000:02:08.0: reg 0x14: [io 0xee00-0xee3f]
    [ 0.127308] pci 0000:02:08.0: supports D1 D2
    [ 0.127311] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.127410] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
    [ 0.127417] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
    [ 0.127423] pci 0000:00:1e.0: bridge window [mem 0xfde00000-0xfdefffff]
    [ 0.127431] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
    [ 0.127435] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
    [ 0.127448] pci_bus 0000:00: on NUMA node 0
    [ 0.128183] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
    [ 0.128303] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 *12 14 15)
    [ 0.128422] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    [ 0.128542] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
    [ 0.128661] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
    [ 0.128780] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    [ 0.128900] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    [ 0.129019] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    [ 0.129353] ACPI: Enabled 2 GPEs in block 00 to 1F
    [ 0.129366] ACPI: \_SB_.PCI0: notify handler is installed
    [ 0.129414] Found 1 acpi root devices
    [ 0.129499] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.129499] vgaarb: loaded
    [ 0.129499] vgaarb: bridge control possible 0000:01:00.0
    [ 0.129499] PCI: Using ACPI for IRQ routing
    [ 0.131455] PCI: pci_cache_line_size set to 64 bytes
    [ 0.131514] e820: reserve RAM buffer [mem 0x00098800-0x0009ffff]
    [ 0.131517] e820: reserve RAM buffer [mem 0xcfedf800-0xcfffffff]
    [ 0.131681] NetLabel: Initializing
    [ 0.131684] NetLabel: domain hash size = 128
    [ 0.131686] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.131709] NetLabel: unlabeled traffic allowed by default
    [ 0.131784] Switched to clocksource refined-jiffies
    [ 0.141221] pnp: PnP ACPI init
    [ 0.141249] ACPI: bus type PNP registered
    [ 0.141516] system 00:00: [io 0x04d0-0x04d1] has been reserved
    [ 0.141521] system 00:00: [io 0x0800-0x087f] has been reserved
    [ 0.141526] system 00:00: [io 0x0880-0x088f] has been reserved
    [ 0.141533] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.141554] pnp 00:01: [dma 4]
    [ 0.141597] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.141664] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.141714] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.141773] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.142316] pnp 00:05: [dma 3]
    [ 0.142386] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
    [ 0.142549] system 00:06: [io 0x0400-0x04bf] has been reserved
    [ 0.142556] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.142624] pnp 00:07: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.143002] system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved
    [ 0.143009] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.143327] system 00:09: [mem 0x000d4800-0x000d7fff] has been reserved
    [ 0.143339] system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved
    [ 0.143344] system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved
    [ 0.143349] system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved
    [ 0.143353] system 00:09: [mem 0xcfee0000-0xcfefffff] could not be reserved
    [ 0.143357] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.143361] system 00:09: [mem 0x00100000-0xcfedffff] could not be reserved
    [ 0.143365] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.143370] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.143374] system 00:09: [mem 0xffb00000-0xffb7ffff] has been reserved
    [ 0.143378] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
    [ 0.143382] system 00:09: [mem 0x000e0000-0x000effff] has been reserved
    [ 0.143387] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.143401] pnp: PnP ACPI: found 10 devices
    [ 0.143404] ACPI: bus type PNP unregistered
    [ 0.181586] Switched to clocksource acpi_pm
    [ 0.181620] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.181626] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    [ 0.181632] pci 0000:00:01.0: bridge window [mem 0xfb000000-0xfcffffff]
    [ 0.181637] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
    [ 0.181644] pci 0000:00:1e.0: PCI bridge to [bus 02]
    [ 0.181649] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
    [ 0.181655] pci 0000:00:1e.0: bridge window [mem 0xfde00000-0xfdefffff]
    [ 0.181797] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.181804] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
    [ 0.181808] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
    [ 0.181812] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
    [ 0.181815] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff]
    [ 0.181819] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xefffffff 64bit pref]
    [ 0.181823] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
    [ 0.181826] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
    [ 0.181830] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
    [ 0.181833] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
    [ 0.181886] NET: Registered protocol family 2
    [ 0.182168] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.182210] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.182250] TCP: Hash tables configured (established 8192 bind 8192)
    [ 0.182288] TCP: reno registered
    [ 0.182293] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.182304] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.182388] NET: Registered protocol family 1
    [ 0.182388] pci 0000:01:00.0: Boot video device
    [ 0.182388] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
    [ 0.182388] PCI: CLS 32 bytes, default 64
    [ 0.182388] Unpacking initramfs...
    [ 3.767636] Freeing initrd memory: 17220K (f672d000 - f77fe000)
    [ 3.767832] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
    [ 3.767836] apm: disabled - APM is not SMP safe.
    [ 3.767883] Scanning for low memory corruption every 60 seconds
    [ 3.768350] audit: initializing netlink socket (disabled)
    [ 3.768369] type=2000 audit(1400530145.763:1): initialized
    [ 3.783776] bounce pool size: 64 pages
    [ 3.783794] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 3.786252] zbud: loaded
    [ 3.786379] VFS: Disk quotas dquot_6.5.2
    [ 3.786456] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 3.786770] msgmni has been set to 1692
    [ 3.787189] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 3.787246] io scheduler noop registered
    [ 3.787250] io scheduler deadline registered
    [ 3.787303] io scheduler cfq registered (default)
    [ 3.787440] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 3.787553] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 3.787585] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 3.787808] GHES: HEST is not enabled!
    [ 3.787828] isapnp: Scanning for PnP cards...
    [ 4.143916] isapnp: No Plug & Play device found
    [ 4.144002] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 4.144834] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 4.393708] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 4.393902] mousedev: PS/2 mouse device common for all mice
    [ 4.394026] rtc_cmos 00:02: RTC can wake from S4
    [ 4.394188] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 4.394220] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram
    [ 4.394271] cpuidle: using governor ladder
    [ 4.394275] cpuidle: using governor menu
    [ 4.394354] drop_monitor: Initializing network drop monitor service
    [ 4.394463] TCP: cubic registered
    [ 4.394689] NET: Registered protocol family 10
    [ 4.394926] NET: Registered protocol family 17
    [ 4.394941] Key type dns_resolver registered
    [ 4.395148] Using IPI No-Shortcut mode
    [ 4.395277] PM: Hibernation image not present or could not be loaded.
    [ 4.395295] registered taskstats version 1
    [ 4.395849] Magic number: 14:160:195
    [ 4.395919] rtc_cmos 00:02: setting system clock to 2014-05-19 20:09:06 UTC (1400530146)
    [ 4.396373] Freeing unused kernel memory: 608K (c06e9000 - c0781000)
    [ 4.396483] Write protecting the kernel text: 4264k
    [ 4.396526] Write protecting the kernel read-only data: 1360k
    [ 4.409586] systemd-udevd[47]: starting version 208
    [ 4.441220] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
    [ 4.441231] ACPI: Power Button [PWRB]
    [ 4.441342] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    [ 4.441349] ACPI: Power Button [PWRF]
    [ 4.453112] Linux agpgart interface v0.103
    [ 4.456375] [drm] Initialized drm 1.1.0 20060810
    [ 4.458668] wmi: Mapper loaded
    [ 4.464289] ACPI: bus type USB registered
    [ 4.464341] usbcore: registered new interface driver usbfs
    [ 4.464366] usbcore: registered new interface driver hub
    [ 4.465442] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 4.465645] r8169 0000:02:05.0 (unregistered net_device): not PCI Express
    [ 4.466029] r8169 0000:02:05.0 eth0: RTL8110s at 0xf850e000, 00:1e:2a:c2:08:13, XID 04000000 IRQ 17
    [ 4.466034] r8169 0000:02:05.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
    [ 4.466473] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
    [ 4.466476] e100: Copyright(c) 1999-2006 Intel Corporation
    [ 4.468849] SCSI subsystem initialized
    [ 4.470129] usbcore: registered new device driver usb
    [ 4.472537] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 4.472967] uhci_hcd: USB Universal Host Controller Interface driver
    [ 4.473145] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 4.473151] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 4.473162] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    [ 4.473215] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff00
    [ 4.474467] hub 1-0:1.0: USB hub found
    [ 4.474476] hub 1-0:1.0: 2 ports detected
    [ 4.476265] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 4.476273] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 4.476283] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    [ 4.476285] ehci-pci: EHCI PCI platform driver
    [ 4.476334] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fe00
    [ 4.477340] ACPI: bus type ATA registered
    [ 4.478267] hub 2-0:1.0: USB hub found
    [ 4.478276] hub 2-0:1.0: 2 ports detected
    [ 4.478975] ehci-pci 0000:00:1d.7: setting latency timer to 64
    [ 4.479324] ehci-pci 0000:00:1d.7: EHCI Host Controller
    [ 4.479335] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 3
    [ 4.483257] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
    [ 4.483270] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdfff000
    [ 4.483319] libata version 3.00 loaded.
    [ 4.490116] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 4.490318] hub 3-0:1.0: USB hub found
    [ 4.490328] hub 3-0:1.0: 8 ports detected
    [ 4.497666] e100 0000:02:08.0 eth1: addr 0xfdefd000, irq 20, MAC addr 00:17:31:0e:7b:1b
    [ 4.498311] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8280a2
    [ 4.498316] nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8)
    [ 4.498320] nouveau [ DEVICE][0000:01:00.0] Family : NV50
    [ 4.499944] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
    [ 4.513467] hub 1-0:1.0: USB hub found
    [ 4.513476] hub 1-0:1.0: 2 ports detected
    [ 4.536751] hub 2-0:1.0: USB hub found
    [ 4.536759] hub 2-0:1.0: 2 ports detected
    [ 4.537041] ata_piix 0000:00:1f.1: version 2.13
    [ 4.537215] ata_piix 0000:00:1f.1: setting latency timer to 64
    [ 4.538319] scsi0 : ata_piix
    [ 4.539121] scsi1 : ata_piix
    [ 4.539242] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfb00 irq 14
    [ 4.539246] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfb08 irq 15
    [ 4.539349] ahci 0000:00:1f.2: version 3.0
    [ 4.539518] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
    [ 4.539607] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID mode
    [ 4.539612] ahci 0000:00:1f.2: flags: 64bit ncq led clo
    [ 4.539618] ahci 0000:00:1f.2: setting latency timer to 64
    [ 4.540696] scsi2 : ahci
    [ 4.540853] scsi3 : ahci
    [ 4.540977] scsi4 : ahci
    [ 4.541096] scsi5 : ahci
    [ 4.541226] ata3: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe100 irq 41
    [ 4.541231] ata4: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe180 irq 41
    [ 4.541235] ata5: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe200 irq 41
    [ 4.541239] ata6: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe280 irq 41
    [ 4.541389] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 4.541395] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 4.541406] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    [ 4.541450] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fd00
    [ 4.541676] hub 4-0:1.0: USB hub found
    [ 4.541683] hub 4-0:1.0: 2 ports detected
    [ 4.541931] uhci_hcd 0000:00:1d.3: setting latency timer to 64
    [ 4.541937] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [ 4.541946] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    [ 4.541985] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00
    [ 4.542120] ata2: port disabled--ignoring
    [ 4.542317] hub 5-0:1.0: USB hub found
    [ 4.542325] hub 5-0:1.0: 2 ports detected
    [ 4.563395] firewire_ohci 0000:02:01.0: added OHCI v1.0 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
    [ 4.574546] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
    [ 4.574552] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
    [ 4.574662] nouveau [ VBIOS][0000:01:00.0] BIT signature found
    [ 4.574667] nouveau [ VBIOS][0000:01:00.0] version 70.18.36.00.00
    [ 4.575237] nouveau [ PFB][0000:01:00.0] RAM type: DDR2
    [ 4.575243] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB
    [ 4.575247] nouveau [ PFB][0000:01:00.0] ZCOMP: 960 tags
    [ 4.713759] ata1.00: ATAPI: TSSTcorpCD/DVDW TS-H652L, 0803, max UDMA/33
    [ 4.743671] ata1.00: configured for UDMA/33
    [ 4.744629] scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H652L 0803 PQ: 0 ANSI: 5
    [ 4.770051] tsc: Refined TSC clocksource calibration: 3000.853 MHz
    [ 4.860047] ata3: SATA link down (SStatus 0 SControl 300)
    [ 5.020046] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 5.020077] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 5.021034] ata5.00: ATA-6: WDC WD800BB-00JHC0, 05.01C05, max UDMA/100
    [ 5.021039] ata5.00: 156301488 sectors, multi 0: LBA
    [ 5.021915] ata5.00: configured for UDMA/100
    [ 5.023691] ata4.00: ATA-6: WDC WD800BB-00JHC0, 05.01C05, max UDMA/100
    [ 5.023695] ata4.00: 156301488 sectors, multi 0: LBA
    [ 5.024602] ata4.00: configured for UDMA/100
    [ 5.024731] scsi 3:0:0:0: Direct-Access ATA WDC WD800BB-00JH 05.0 PQ: 0 ANSI: 5
    [ 5.025019] scsi 4:0:0:0: Direct-Access ATA WDC WD800BB-00JH 05.0 PQ: 0 ANSI: 5
    [ 5.063459] firewire_core 0000:02:01.0: created device fw0: GUID 0011d800009e9dd1, S400
    [ 5.090025] usb 1-1: new low-speed USB device number 2 using uhci_hcd
    [ 5.180043] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 5.184039] ata6.00: ATA-6: ST380011A, 3.04, max UDMA/100
    [ 5.184044] ata6.00: 156301488 sectors, multi 0: LBA48
    [ 5.188337] ata6.00: configured for UDMA/100
    [ 5.188461] scsi 5:0:0:0: Direct-Access ATA ST380011A 3.04 PQ: 0 ANSI: 5
    [ 5.199621] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 5.199627] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 5.199923] sr 0:0:0:0: Attached scsi CD-ROM sr0
    [ 5.200185] sd 3:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
    [ 5.200346] sd 3:0:0:0: [sda] Write Protect is off
    [ 5.200351] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 5.200393] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 5.200900] sd 4:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
    [ 5.200997] sd 4:0:0:0: [sdb] Write Protect is off
    [ 5.201002] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 5.201043] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 5.201527] sd 5:0:0:0: [sdc] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
    [ 5.201623] sd 5:0:0:0: [sdc] Write Protect is off
    [ 5.201627] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    [ 5.201669] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 5.207456] sdc: sdc1
    [ 5.207886] sd 5:0:0:0: [sdc] Attached SCSI disk
    [ 5.235174] sda: sda1 sda2 < sda5 >
    [ 5.235744] sd 3:0:0:0: [sda] Attached SCSI disk
    [ 5.237596] sdb: sdb1 sdb2 < sdb5 >
    [ 5.238117] sd 4:0:0:0: [sdb] Attached SCSI disk
    [ 5.260907] hidraw: raw HID events driver (C) Jiri Kosina
    [ 5.277654] usbcore: registered new interface driver usbhid
    [ 5.277659] usbhid: USB HID core driver
    [ 5.280199] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input2
    [ 5.280357] hid-generic 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1/input0
    [ 5.770105] Switched to clocksource tsc
    [ 6.481687] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
    [ 6.481702] nouveau [ PTHERM][0000:01:00.0] fan management: disabled
    [ 6.481708] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
    [ 6.481900] [TTM] Zone kernel: Available graphics memory: 433706 kiB
    [ 6.481904] [TTM] Zone highmem: Available graphics memory: 1682412 kiB
    [ 6.481907] [TTM] Initializing pool allocator
    [ 6.481924] nouveau [ DRM] VRAM: 512 MiB
    [ 6.481927] nouveau [ DRM] GART: 1048576 MiB
    [ 6.481933] nouveau [ DRM] TMDS table version 2.0
    [ 6.481936] nouveau [ DRM] DCB version 4.0
    [ 6.481940] nouveau [ DRM] DCB outp 00: 01000302 00020030
    [ 6.481944] nouveau [ DRM] DCB outp 01: 02000300 00000000
    [ 6.481948] nouveau [ DRM] DCB outp 03: 02011362 00020010
    [ 6.481951] nouveau [ DRM] DCB outp 04: 01022310 00000000
    [ 6.481954] nouveau [ DRM] DCB conn 00: 00001030
    [ 6.481959] nouveau [ DRM] DCB conn 01: 00202161
    [ 6.481964] nouveau [ DRM] DCB conn 02: 00000200
    [ 6.505501] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 6.505505] [drm] No driver support for vblank timestamp query.
    [ 6.505631] nouveau [ DRM] 2 available performance level(s)
    [ 6.505637] nouveau [ DRM] 1: core 405MHz shader 810MHz memory 405MHz voltage 900mV
    [ 6.505642] nouveau [ DRM] 3: core 589MHz shader 1402MHz memory 405MHz voltage 1000mV
    [ 6.505646] nouveau [ DRM] c: core 405MHz shader 810MHz memory 405MHz voltage 900mV
    [ 6.531333] nouveau [ DRM] MM: using COPY for buffer copies
    [ 6.581567] nouveau [ DRM] allocated 1280x1024 fb: 0x70000, bo f7015a00
    [ 6.581724] fbcon: nouveaufb (fb0) is primary device
    [ 6.653923] Console: switching to colour frame buffer device 160x64
    [ 6.655952] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
    [ 6.655955] nouveau 0000:01:00.0: registered panic notifier
    [ 6.655962] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
    [ 7.082698] ISO 9660 Extensions: RRIP_1991A
    [ 7.168774] loop: module loaded
    [ 8.253583] squashfs: version 4.0 (2009/01/31) Phillip Lougher
    [ 8.355925] device-mapper: uevent: version 1.0.3
    [ 8.356608] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: [email protected]
    [ 8.362693] bio: create slab <bio-1> at 1
    [ 8.386733] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
    [ 10.338096] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 10.417677] systemd[1]: Set hostname to <archiso>.
    [ 10.724871] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 10.724981] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 10.725005] systemd[1]: Starting Remote File Systems.
    [ 10.725151] systemd[1]: Reached target Remote File Systems.
    [ 10.725172] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 10.725323] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 10.725343] systemd[1]: Starting Delayed Shutdown Socket.
    [ 10.725469] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 10.725488] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 10.725627] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 10.725646] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 10.725770] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 10.725790] systemd[1]: Starting Root Slice.
    [ 10.726156] systemd[1]: Created slice Root Slice.
    [ 10.726176] systemd[1]: Starting User and Session Slice.
    [ 10.726413] systemd[1]: Created slice User and Session Slice.
    [ 10.726434] systemd[1]: Starting System Slice.
    [ 10.726647] systemd[1]: Created slice System Slice.
    [ 10.726682] systemd[1]: Starting system-getty.slice.
    [ 10.726921] systemd[1]: Created slice system-getty.slice.
    [ 10.726941] systemd[1]: Starting Slices.
    [ 10.727040] systemd[1]: Reached target Slices.
    [ 10.727064] systemd[1]: Starting Journal Socket.
    [ 10.727235] systemd[1]: Listening on Journal Socket.
    [ 10.727662] systemd[1]: Starting Load Kernel Modules...
    [ 10.728292] systemd[1]: Mounting POSIX Message Queue File System...
    [ 10.880863] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 10.881454] systemd[1]: Starting Journal Service...
    [ 10.882180] systemd[1]: Started Journal Service.
    [ 11.716066] systemd-journald[149]: Vacuuming done, freed 0 bytes
    [ 11.916159] FS-Cache: Loaded
    [ 12.202893] RPC: Registered named UNIX socket transport module.
    [ 12.202899] RPC: Registered udp transport module.
    [ 12.202902] RPC: Registered tcp transport module.
    [ 12.202904] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 12.619444] FS-Cache: Netfs 'nfs' registered for caching
    [ 12.812715] systemd-udevd[181]: starting version 208
    [ 12.905896] systemd-journald[149]: Received request to flush runtime journal from PID 1
    [ 15.580133] thermal LNXTHERM:00: registered as thermal_zone0
    [ 15.580139] ACPI: Thermal Zone [THRM] (40 C)
    [ 15.915160] ACPI: Fan [FAN] (on)
    [ 16.002108] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PM2S 1 (20130517/utaddress-251)
    [ 16.002119] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PM1K 2 (20130517/utaddress-251)
    [ 16.002126] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \GPE1 3 (20130517/utaddress-251)
    [ 16.002133] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 16.002139] ACPI Warning: 0x000004b0-0x000004bf SystemIO conflicts with Region \GPO2 1 (20130517/utaddress-251)
    [ 16.002145] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 16.002148] ACPI Warning: 0x00000480-0x000004af SystemIO conflicts with Region \GPIV 1 (20130517/utaddress-251)
    [ 16.002153] ACPI Warning: 0x00000480-0x000004af SystemIO conflicts with Region \GPO_ 2 (20130517/utaddress-251)
    [ 16.002158] ACPI Warning: 0x00000480-0x000004af SystemIO conflicts with Region \PALD 3 (20130517/utaddress-251)
    [ 16.002164] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 16.002166] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 16.342474] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 16.403348] leds_ss4200: no LED devices found
    [ 16.664449] parport_pc 00:05: reported by Plug and Play ACPI
    [ 16.664509] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
    [ 16.686843] systemd-udevd[203]: renamed network interface eth0 to enp2s5
    [ 16.770163] systemd-udevd[209]: renamed network interface eth1 to enp2s8
    [ 17.098798] input: PC Speaker as /devices/platform/pcspkr/input/input3
    [ 17.779883] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
    [ 17.780620] ppdev: user-space parallel port driver
    [ 17.849790] microcode: CPU0 sig=0xf62, pf=0x4, revision=0xf
    [ 17.944384] iTCO_vendor_support: vendor-support=0
    [ 17.946278] microcode: CPU1 sig=0xf62, pf=0x4, revision=0xf
    [ 17.947486] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 17.950629] r8169 0000:02:05.0 enp2s5: link down
    [ 17.950649] r8169 0000:02:05.0 enp2s5: link down
    [ 17.950666] IPv6: ADDRCONF(NETDEV_UP): enp2s5: link is not ready
    [ 17.965112] IPv6: ADDRCONF(NETDEV_UP): enp2s8: link is not ready
    [ 18.405080] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 18.405126] iTCO_wdt: Found a ICH7DH TCO device (Version=2, TCOBASE=0x0460)
    [ 18.405284] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 18.872915] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
    [ 19.433622] hda_codec: ALC882: SKU not ready 0x411111f0
    [ 19.445025] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
    [ 19.479013] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
    [ 19.479156] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
    [ 19.479804] hda_intel: Disabling MSI
    [ 19.479816] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
    [ 20.178014] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
    [ 20.178270] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
    [ 20.178485] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
    [ 20.178696] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
    [44490.433683] md: bind<sda1>
    [44490.446722] md: bind<sdb1>
    [44490.449241] md: raid1 personality registered for level 1
    [44490.450198] md/raid1:md1: not clean -- starting background reconstruction
    [44490.450203] md/raid1:md1: active with 2 out of 2 mirrors
    [44490.450235] md1: detected capacity change from 0 to 75934400512
    [44490.452050] md: resync of RAID array md1
    [44490.452056] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
    [44490.452059] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
    [44490.452064] md: using 128k window, over a total of 74154688k.
    [44490.454641] md1: unknown partition table
    [45968.754029] md: md1: resync done.
    [45968.841250] RAID1 conf printout:
    [45968.841254] --- wd:2 rd:2
    [45968.841258] disk 0, wo:0, o:1, dev:sda1
    [45968.841261] disk 1, wo:0, o:1, dev:sdb1
    [47642.847783] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null)
    [47687.134362] r8169 0000:02:05.0 enp2s5: link up
    [47687.134376] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s5: link becomes ready
    [47825.775238] usb 3-6: new high-speed USB device number 3 using ehci-pci
    [47825.899362] usb 3-6: unable to get BOS descriptor set
    [47826.017245] usb-storage 3-6:1.0: USB Mass Storage device detected
    [47826.017363] scsi6 : usb-storage 3-6:1.0
    [47826.017504] usbcore: registered new interface driver usb-storage
    [47827.081919] scsi 6:0:0:0: Direct-Access PMAP PQ: 0 ANSI: 4
    [47827.802316] sd 6:0:0:0: [sdd] 15466496 512-byte logical blocks: (7.91 GB/7.37 GiB)
    [47827.804809] sd 6:0:0:0: [sdd] Write Protect is off
    [47827.804814] sd 6:0:0:0: [sdd] Mode Sense: 23 00 00 00
    [47827.807314] sd 6:0:0:0: [sdd] No Caching mode page found
    [47827.807763] sd 6:0:0:0: [sdd] Assuming drive cache: write through
    [47827.816453] sd 6:0:0:0: [sdd] No Caching mode page found
    [47827.816915] sd 6:0:0:0: [sdd] Assuming drive cache: write through
    [47827.845089] sdd: sdd1
    [47827.851818] sd 6:0:0:0: [sdd] No Caching mode page found
    [47827.852305] sd 6:0:0:0: [sdd] Assuming drive cache: write through
    [47827.852776] sd 6:0:0:0: [sdd] Attached SCSI removable disk
    [47901.177187] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
    [48255.001967] usb 3-6: USB disconnect, device number 3
    [48456.278507] usb 3-6: new high-speed USB device number 4 using ehci-pci
    [48456.402614] usb 3-6: unable to get BOS descriptor set
    [48456.425683] usb-storage 3-6:1.0: USB Mass Storage device detected
    [48456.425763] scsi7 : usb-storage 3-6:1.0
    [48457.491544] scsi 7:0:0:0: Direct-Access PMAP PQ: 0 ANSI: 4
    [48458.209938] sd 7:0:0:0: [sdd] 15466496 512-byte logical blocks: (7.91 GB/7.37 GiB)
    [48458.212437] sd 7:0:0:0: [sdd] Write Protect is off
    [48458.212442] sd 7:0:0:0: [sdd] Mode Sense: 23 00 00 00
    [48458.214932] sd 7:0:0:0: [sdd] No Caching mode page found
    [48458.215426] sd 7:0:0:0: [sdd] Assuming drive cache: write through
    [48458.224684] sd 7:0:0:0: [sdd] No Caching mode page found
    [48458.225143] sd 7:0:0:0: [sdd] Assuming drive cache: write through
    [48458.253332] sdd: sdd1
    [48458.265813] sd 7:0:0:0: [sdd] No Caching mode page found
    [48458.266295] sd 7:0:0:0: [sdd] Assuming drive cache: write through
    [48458.266755] sd 7:0:0:0: [sdd] Attached SCSI removable disk
    [48470.450341] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
    [50093.387926] Adding 3930408k swap on /dev/sda5. Priority:-1 extents:1 across:3930408k FS
    [50096.410969] Adding 3930408k swap on /dev/sdb5. Priority:-2 extents:1 across:3930408k FS
    [54374.314336] ata4.00: exception Emask 0x50 SAct 0x0 SErr 0x480900 action 0x6 frozen
    [54374.314836] ata4.00: irq_stat 0x08000000, interface fatal error
    [54374.315323] ata4: SError: { UnrecovData HostInt 10B8B Handshk }
    [54374.315764] ata4.00: failed command: WRITE DMA
    [54374.316198] ata4.00: cmd ca/00:88:9f:ca:8d/00:00:00:00:00/e8 tag 0 dma 69632 out
    res 50/00:00:9e:ca:8d/00:00:9e:c9:8d/e8 Emask 0x50 (ATA bus error)
    [54374.317334] ata4.00: status: { DRDY }
    [54374.318002] ata4: hard resetting link
    [54374.904585] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [54374.906314] ata4.00: configured for UDMA/100
    [54374.906332] ata4: EH complete
    [56161.610355] sdd: detected capacity change from 7918845952 to 0
    [56178.066775] usb 3-6: USB disconnect, device number 4
    [56193.205154] ata6: exception Emask 0x50 SAct 0x0 SErr 0x90800 action 0xe frozen
    [56193.205703] ata6: irq_stat 0x00400000, PHY RDY changed
    [56193.206232] ata6: SError: { HostInt PHYRdyChg 10B8B }
    [56193.206732] ata6: hard resetting link
    [56193.924403] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [56193.932798] ata6.00: configured for UDMA/100
    [56193.932805] ata6: EH complete
    [56195.044927] ata6: exception Emask 0x10 SAct 0x0 SErr 0x90000 action 0xe frozen
    [56195.045472] ata6: irq_stat 0x00400000, PHY RDY changed
    [56195.046003] ata6: SError: { PHYRdyChg 10B8B }
    [56195.046511] ata6: hard resetting link
    [56195.764407] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [56195.772826] ata6.00: configured for UDMA/100
    [56195.772832] ata6: EH complete
    [56217.331067] usb 3-6: new high-speed USB device number 5 using ehci-pci
    [56217.455149] usb 3-6: unable to get BOS descriptor set
    [56217.478526] usb-storage 3-6:1.0: USB Mass Storage device detected
    [56217.478662] scsi8 : usb-storage 3-6:1.0
    [56218.544212] scsi 8:0:0:0: Direct-Access PMAP PQ: 0 ANSI: 4
    [56219.262349] sd 8:0:0:0: [sdd] 15466496 512-byte logical blocks: (7.91 GB/7.37 GiB)
    [56219.264849] sd 8:0:0:0: [sdd] Write Protect is off
    [56219.264855] sd 8:0:0:0: [sdd] Mode Sense: 23 00 00 00
    [56219.267343] sd 8:0:0:0: [sdd] No Caching mode page found
    [56219.267939] sd 8:0:0:0: [sdd] Assuming drive cache: write through
    [56219.277220] sd 8:0:0:0: [sdd] No Caching mode page found
    [56219.277802] sd 8:0:0:0: [sdd] Assuming drive cache: write through
    [56219.305984] sdd: sdd1
    [56219.318099] sd 8:0:0:0: [sdd] No Caching mode page found
    [56219.318677] sd 8:0:0:0: [sdd] Assuming drive cache: write through
    [56219.319238] sd 8:0:0:0: [sdd] Attached SCSI removable disk
    [56234.556099] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
    Edit: Just after I took out my flashdrive, when I accidentally bumped one of the HDs, this popped up:
    [56193.205154] ata6: exception Emask 0x50 SAct 0x0 SErr 0x90800 action 0xe frozen
    [56193.205703] ata6: irq_stat 0x00400000, PHY RDY changed
    [56193.206232] ata6: SError: { HostInt PHYRdyChg 10B8B }
    [56193.206732] ata6: hard resetting link
    [56193.924403] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [56193.932798] ata6.00: configured for UDMA/100
    [56193.932805] ata6: EH complete
    [56195.044927] ata6: exception Emask 0x10 SAct 0x0 SErr 0x90000 action 0xe frozen
    [56195.045472] ata6: irq_stat 0x00400000, PHY RDY changed
    [56195.046003] ata6: SError: { PHYRdyChg 10B8B }
    [56195.046511] ata6: hard resetting link
    Last edited by Dornith (2014-05-20 16:08:40)

    http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
    ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
    ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
    Controller-specific error completion with error information indicating transmission error.
    On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
    Unknown/random errors, timeouts and all sorts of weirdities.
    As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
    Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
    I'd also add; make sure you have good backups when ATA errors are frequent

  • Unable to Use Onboard Audio with Nvidia GPU since Linux 3.4

    I am currently stuck using linux 3.3.8-1 along with nvidia 295.49-1, because I don't know how to workaround the kernel disabling MSI for snd-hda-intel. This module is used by both the Nvidia HDMI audio and the ALC880 onboard audio. Previously, I have been able to disable HDMI audio to be able to use the onboard audio, but now I don't know what to do. I have attempted to use "options snd-hda-intel enable_msi=1" when modprobing on boot, which gets rid of the "hda_intel: Disabling MSI" message but it hasn't given me a working onboard audio output.
    I have also used the following command along with enable_msi=1 (found here: http://www.mjmwired.net/kernel/Document … HOWTO.txt) in my rc.local
    echo 1 > /sys/bus/pci/devices/0000\:00\:1b.0/msi_bus
    Of course, it is my assumption that the kernel disabling MSI is the cause of the problem, but it might be something else. Please let me know if any additional logs would be helpful.
    Linux 3.4.4-3, Nvidia 302.17-2  Dmesg Output
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.4.4-3-ARCH (nobody@rampage) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Tue Jul 3 15:35:13 UTC 2012
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe54000 (usable)
    [ 0.000000] BIOS-e820: 000000003fe54000 - 000000003fee8000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000003fee8000 - 000000003ff00000 (ACPI data)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.3 present.
    [ 0.000000] DMI: 507GR /D915GAG, BIOS AG91510J.15A.0816.2005.0214.1818 02/14/2005
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0x3fe54 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask FC0000000 write-back
    [ 0.000000] 1 base 03FF00000 mask FFFF00000 uncachable
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [c00fe650] fe650
    [ 0.000000] initial memory mapped : 0 - 00c00000
    [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ bfb000-c00000
    [ 0.000000] RAMDISK: 3fb6f000 - 3fe44000
    [ 0.000000] Allocated new RAMDISK: 37529000 - 377fd6a7
    [ 0.000000] Move RAMDISK from 000000003fb6f000 - 000000003fe436a6 to 37529000 - 377fd6a6
    [ 0.000000] ACPI: RSDP 000fe020 00014 (v00 GATEWA)
    [ 0.000000] ACPI: RSDT 3fefde48 00038 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: FACP 3fefcf10 00074 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: DSDT 3fef8010 0339C (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: FACS 3fee5c40 00040
    [ 0.000000] ACPI: APIC 3fefce10 00068 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: WDDT 3fef7f90 00040 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: MCFG 3fef7f10 0003C (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 3fef6d90 00124 (v01 GATEWA CpuPm 00000330 MSFT 01000013)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 134MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x0003fe54
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x0003fe54
    [ 0.000000] On node 0 totalpages: 261603
    [ 0.000000] free_area_init_node: node 0, pgdat c061ec40, node_mem_map f6d28200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 269 pages used for memmap
    [ 0.000000] HighMem zone: 34121 pages, LIFO batch:7
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 3ff00000 (gap: 3ff00000:c0100000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 13 pages/cpu @f6d07000 s31424 r0 d21824 u53248
    [ 0.000000] pcpu-alloc: s31424 r0 d21824 u53248 alloc=13*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259558
    [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/10f8033d-8fe9-46be-bccf-68a14025bbaa ro init=/bin/systemd
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] allocated 2093600 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0003fe54)
    [ 0.000000] Memory: 1025576k/1046864k available (3810k kernel code, 20836k reserved, 1471k data, 524k init, 137560k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc0629000 - 0xc06ac000 ( 524 kB)
    [ 0.000000] .data : 0xc04b88f7 - 0xc0628800 (1471 kB)
    [ 0.000000] .text : 0xc0100000 - 0xc04b88f7 (3810 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] NR_IRQS:2304 nr_irqs:512 16
    [ 0.000000] CPU 0 irqstacks, hard=f6408000 soft=f640a000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 2999.992 MHz processor.
    [ 0.006668] Calibrating delay loop (skipped), value calculated using timer frequency.. 6002.98 BogoMIPS (lpj=9999973)
    [ 0.006674] pid_max: default: 32768 minimum: 301
    [ 0.006706] Security Framework initialized
    [ 0.006712] AppArmor: AppArmor disabled by boot time parameter
    [ 0.006735] Mount-cache hash table entries: 512
    [ 0.007027] Initializing cgroup subsys cpuacct
    [ 0.007032] Initializing cgroup subsys memory
    [ 0.007043] Initializing cgroup subsys devices
    [ 0.007046] Initializing cgroup subsys freezer
    [ 0.007049] Initializing cgroup subsys net_cls
    [ 0.007052] Initializing cgroup subsys blkio
    [ 0.007102] CPU: Physical Processor ID: 0
    [ 0.007105] CPU: Processor Core ID: 0
    [ 0.007108] mce: CPU supports 4 MCE banks
    [ 0.007122] CPU0: Thermal monitoring enabled (TM1)
    [ 0.007127] using mwait in idle threads.
    [ 0.010796] ACPI: Core revision 20120320
    [ 0.013347] ftrace: allocating 16930 entries in 34 pages
    [ 0.023410] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.023795] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.058322] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
    [ 0.059996] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
    [ 0.059996] ... version: 0
    [ 0.059996] ... bit width: 40
    [ 0.059996] ... generic registers: 18
    [ 0.059996] ... value mask: 000000ffffffffff
    [ 0.059996] ... max period: 0000007fffffffff
    [ 0.059996] ... fixed-purpose events: 0
    [ 0.059996] ... event mask: 000000000003ffff
    [ 0.076747] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.096685] CPU 1 irqstacks, hard=f64ae000 soft=f64b0000
    [ 0.096689] Booting Node 0, Processors #1 Ok.
    [ 0.009999] Initializing CPU#1
    [ 0.109847] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.109913] Brought up 2 CPUs
    [ 0.109918] Total of 2 processors activated (12004.96 BogoMIPS).
    [ 0.110087] devtmpfs: initialized
    [ 0.110253] PM: Registering ACPI NVS region [mem 0x3fe54000-0x3fee7fff] (606208 bytes)
    [ 0.111622] NET: Registered protocol family 16
    [ 0.111622] ACPI: bus type pci registered
    [ 0.111622] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.111622] PCI: not using MMCONFIG
    [ 0.112603] PCI: Using configuration type 1 for base access
    [ 0.116699] bio: create slab <bio-0> at 0
    [ 0.116741] ACPI: Added _OSI(Module Device)
    [ 0.116741] ACPI: Added _OSI(Processor Device)
    [ 0.116741] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.116741] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.117482] ACPI: EC: Look up EC in DSDT
    [ 0.119433] ACPI: Interpreter enabled
    [ 0.119446] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.119477] ACPI: Using IOAPIC for interrupt routing
    [ 0.119501] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.119654] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.119657] PCI: Using MMCONFIG for extended config space
    [ 0.121061] ACPI: No dock devices found.
    [ 0.121073] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [ 0.122518] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.125297] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    [ 0.125302] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
    [ 0.125306] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [ 0.125310] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000fffff] (ignored)
    [ 0.125314] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfbffffff] (ignored)
    [ 0.125317] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xe0000000] (ignored)
    [ 0.125321] PCI: root bus 00: using default resources
    [ 0.125377] PCI host bridge to bus 0000:00
    [ 0.125382] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
    [ 0.125385] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
    [ 0.125400] pci 0000:00:00.0: [8086:2580] type 00 class 0x060000
    [ 0.125463] pci 0000:00:01.0: [8086:2581] type 01 class 0x060400
    [ 0.125521] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.125577] pci 0000:00:1b.0: [8086:2668] type 00 class 0x040300
    [ 0.125597] pci 0000:00:1b.0: reg 10: [mem 0x53300000-0x53303fff 64bit]
    [ 0.125676] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.125704] pci 0000:00:1c.0: [8086:2660] type 01 class 0x060400
    [ 0.125786] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.125815] pci 0000:00:1c.1: [8086:2662] type 01 class 0x060400
    [ 0.125898] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.125928] pci 0000:00:1c.2: [8086:2664] type 01 class 0x060400
    [ 0.126011] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.126040] pci 0000:00:1c.3: [8086:2666] type 01 class 0x060400
    [ 0.126123] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.126154] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
    [ 0.126201] pci 0000:00:1d.0: reg 20: [io 0x4080-0x409f]
    [ 0.126239] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
    [ 0.126285] pci 0000:00:1d.1: reg 20: [io 0x4060-0x407f]
    [ 0.126322] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
    [ 0.126368] pci 0000:00:1d.2: reg 20: [io 0x4040-0x405f]
    [ 0.126405] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
    [ 0.126451] pci 0000:00:1d.3: reg 20: [io 0x4020-0x403f]
    [ 0.126498] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
    [ 0.126521] pci 0000:00:1d.7: reg 10: [mem 0x53304000-0x533043ff]
    [ 0.126613] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.126638] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
    [ 0.126718] pci 0000:00:1f.0: [8086:2640] type 00 class 0x060100
    [ 0.126810] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
    [ 0.126823] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0680-06ff
    [ 0.126850] pci 0000:00:1f.1: [8086:266f] type 00 class 0x01018a
    [ 0.126867] pci 0000:00:1f.1: reg 10: [io 0x40d8-0x40df]
    [ 0.126878] pci 0000:00:1f.1: reg 14: [io 0x40ec-0x40ef]
    [ 0.126889] pci 0000:00:1f.1: reg 18: [io 0x40d0-0x40d7]
    [ 0.126901] pci 0000:00:1f.1: reg 1c: [io 0x40e8-0x40eb]
    [ 0.126912] pci 0000:00:1f.1: reg 20: [io 0x40b0-0x40bf]
    [ 0.126954] pci 0000:00:1f.2: [8086:2651] type 00 class 0x01018f
    [ 0.126971] pci 0000:00:1f.2: reg 10: [io 0x40c8-0x40cf]
    [ 0.126981] pci 0000:00:1f.2: reg 14: [io 0x40e4-0x40e7]
    [ 0.126991] pci 0000:00:1f.2: reg 18: [io 0x40c0-0x40c7]
    [ 0.127002] pci 0000:00:1f.2: reg 1c: [io 0x40e0-0x40e3]
    [ 0.127012] pci 0000:00:1f.2: reg 20: [io 0x40a0-0x40af]
    [ 0.127053] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.127072] pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
    [ 0.127129] pci 0000:00:1f.3: reg 20: [io 0x4000-0x401f]
    [ 0.127217] pci 0000:01:00.0: [10de:0a65] type 00 class 0x030000
    [ 0.127232] pci 0000:01:00.0: reg 10: [mem 0x52000000-0x52ffffff]
    [ 0.127247] pci 0000:01:00.0: reg 14: [mem 0x40000000-0x4fffffff 64bit pref]
    [ 0.127261] pci 0000:01:00.0: reg 1c: [mem 0x50000000-0x51ffffff 64bit pref]
    [ 0.127271] pci 0000:01:00.0: reg 24: [io 0x3000-0x307f]
    [ 0.127281] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
    [ 0.127352] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
    [ 0.127367] pci 0000:01:00.1: reg 10: [mem 0x53000000-0x53003fff]
    [ 0.136679] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.136685] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
    [ 0.136689] pci 0000:00:01.0: bridge window [mem 0x52000000-0x530fffff]
    [ 0.136695] pci 0000:00:01.0: bridge window [mem 0x40000000-0x51ffffff pref]
    [ 0.136765] pci 0000:02:00.0: [1b21:0612] type 00 class 0x010601
    [ 0.136788] pci 0000:02:00.0: reg 10: [io 0x2028-0x202f]
    [ 0.136804] pci 0000:02:00.0: reg 14: [io 0x2034-0x2037]
    [ 0.136819] pci 0000:02:00.0: reg 18: [io 0x2020-0x2027]
    [ 0.136836] pci 0000:02:00.0: reg 1c: [io 0x2030-0x2033]
    [ 0.136852] pci 0000:02:00.0: reg 20: [io 0x2000-0x201f]
    [ 0.136868] pci 0000:02:00.0: reg 24: [mem 0x53200000-0x532001ff]
    [ 0.136885] pci 0000:02:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
    [ 0.146676] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 0.146682] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.146687] pci 0000:00:1c.0: bridge window [mem 0x53200000-0x532fffff]
    [ 0.146740] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 0.146747] pci 0000:00:1c.1: bridge window [mem 0x53400000-0x534fffff]
    [ 0.146798] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
    [ 0.146805] pci 0000:00:1c.2: bridge window [mem 0x53500000-0x535fffff]
    [ 0.146858] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
    [ 0.146866] pci 0000:00:1c.3: bridge window [mem 0x53600000-0x536fffff]
    [ 0.146917] pci 0000:06:05.0: [11c1:5811] type 00 class 0x0c0010
    [ 0.146938] pci 0000:06:05.0: reg 10: [mem 0x53101000-0x53101fff]
    [ 0.147024] pci 0000:06:05.0: supports D1 D2
    [ 0.147027] pci 0000:06:05.0: PME# supported from D0 D1 D2 D3hot
    [ 0.147053] pci 0000:06:08.0: [8086:1064] type 00 class 0x020000
    [ 0.147074] pci 0000:06:08.0: reg 10: [mem 0x53100000-0x53100fff]
    [ 0.147086] pci 0000:06:08.0: reg 14: [io 0x1000-0x103f]
    [ 0.147161] pci 0000:06:08.0: supports D1 D2
    [ 0.147164] pci 0000:06:08.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.147208] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
    [ 0.147214] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
    [ 0.147219] pci 0000:00:1e.0: bridge window [mem 0x53100000-0x531fffff]
    [ 0.147227] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
    [ 0.147231] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
    [ 0.147260] pci_bus 0000:00: on NUMA node 0
    [ 0.147266] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.147465] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
    [ 0.147735] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
    [ 0.147802] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
    [ 0.147870] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
    [ 0.147936] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
    [ 0.148039] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.148044] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 0.148047] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.152485] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.152581] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
    [ 0.152676] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.152768] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.152859] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.152951] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
    [ 0.153045] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
    [ 0.153138] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
    [ 0.153367] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.153374] vgaarb: loaded
    [ 0.153377] vgaarb: bridge control possible 0000:01:00.0
    [ 0.153377] PCI: Using ACPI for IRQ routing
    [ 0.160505] PCI: pci_cache_line_size set to 64 bytes
    [ 0.160612] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
    [ 0.160616] reserve RAM buffer: 000000003fe54000 - 000000003fffffff
    [ 0.160771] NetLabel: Initializing
    [ 0.160775] NetLabel: domain hash size = 128
    [ 0.160777] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.160799] NetLabel: unlabeled traffic allowed by default
    [ 0.160906] hpet clockevent registered
    [ 0.160911] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.160917] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.160924] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [ 0.173350] Switching to clocksource hpet
    [ 0.182676] pnp: PnP ACPI init
    [ 0.182706] ACPI: bus type pnp registered
    [ 0.184200] pnp 00:00: [bus 00-ff]
    [ 0.184205] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.184209] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.184212] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.184216] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.184219] pnp 00:00: [mem 0x000c0000-0x000fffff window]
    [ 0.184223] pnp 00:00: [mem 0xf0000000-0xfbffffff window]
    [ 0.184229] pnp 00:00: [mem 0x40000000-0xe0000000 window]
    [ 0.184297] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 0.184317] pnp 00:01: [mem 0xe0000000-0xefffffff]
    [ 0.184321] pnp 00:01: [mem 0xfed13000-0xfed13fff]
    [ 0.184324] pnp 00:01: [mem 0xfed14000-0xfed17fff]
    [ 0.184327] pnp 00:01: [mem 0xfed18000-0xfed18fff]
    [ 0.184330] pnp 00:01: [mem 0xfed19000-0xfed19fff]
    [ 0.184333] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
    [ 0.184336] pnp 00:01: [mem 0xfed20000-0xfed9ffff]
    [ 0.184412] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.184417] system 00:01: [mem 0xfed13000-0xfed13fff] has been reserved
    [ 0.184421] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
    [ 0.184425] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.184429] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.184432] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.184436] system 00:01: [mem 0xfed20000-0xfed9ffff] has been reserved
    [ 0.184442] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.184642] pnp 00:02: [io 0x0000-0x000f]
    [ 0.184646] pnp 00:02: [io 0x0081-0x0083]
    [ 0.184649] pnp 00:02: [io 0x0087]
    [ 0.184652] pnp 00:02: [io 0x0089-0x008b]
    [ 0.184655] pnp 00:02: [io 0x008f]
    [ 0.184658] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.184661] pnp 00:02: [dma 4]
    [ 0.184706] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.184723] pnp 00:03: [io 0x0070-0x0071]
    [ 0.184726] pnp 00:03: [io 0x0074-0x0077]
    [ 0.184740] pnp 00:03: [irq 8]
    [ 0.184783] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.184802] pnp 00:04: [io 0x00f0]
    [ 0.184810] pnp 00:04: [irq 13]
    [ 0.184854] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.184871] pnp 00:05: [io 0x0061]
    [ 0.184919] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.184938] pnp 00:06: [io 0x0500-0x053f]
    [ 0.184942] pnp 00:06: [io 0x0400-0x047f]
    [ 0.184945] pnp 00:06: [io 0x0092]
    [ 0.184948] pnp 00:06: [io 0x0680-0x06ff]
    [ 0.184951] pnp 00:06: [io 0x0010-0x001f]
    [ 0.184954] pnp 00:06: [io 0x0072-0x0073]
    [ 0.184956] pnp 00:06: [io 0x0080]
    [ 0.184959] pnp 00:06: [io 0x0084-0x0086]
    [ 0.184962] pnp 00:06: [io 0x0088]
    [ 0.184965] pnp 00:06: [io 0x008c-0x008e]
    [ 0.184968] pnp 00:06: [io 0x0090-0x009f]
    [ 0.185047] system 00:06: [io 0x0500-0x053f] has been reserved
    [ 0.185051] system 00:06: [io 0x0400-0x047f] has been reserved
    [ 0.185055] system 00:06: [io 0x0680-0x06ff] has been reserved
    [ 0.185061] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.185320] pnp 00:07: [io 0x0378-0x037f]
    [ 0.185329] pnp 00:07: [irq 7]
    [ 0.185426] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
    [ 0.185514] pnp 00:08: [irq 12]
    [ 0.185563] pnp 00:08: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
    [ 0.185600] pnp 00:09: [io 0x0060]
    [ 0.185604] pnp 00:09: [io 0x0064]
    [ 0.185611] pnp 00:09: [irq 1]
    [ 0.185661] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.185822] pnp 00:0a: [io 0x03f8-0x03ff]
    [ 0.185831] pnp 00:0a: [irq 4]
    [ 0.185938] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.185964] pnp 00:0b: [mem 0xfec00000-0xfec000ff]
    [ 0.186015] pnp 00:0b: Plug and Play ACPI device, IDs PNP0003 (active)
    [ 0.186047] pnp: PnP ACPI: found 12 devices
    [ 0.186049] ACPI: ACPI bus type pnp unregistered
    [ 0.224576] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
    [ 0.224583] pci 0000:02:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
    [ 0.224623] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x001fffff pref] to [bus 02-02] add_size 200000
    [ 0.224635] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03-03] add_size 1000
    [ 0.224640] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-03] add_size 200000
    [ 0.224651] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 04-04] add_size 1000
    [ 0.224656] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-04] add_size 200000
    [ 0.224667] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 05-05] add_size 1000
    [ 0.224672] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-05] add_size 200000
    [ 0.224692] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
    [ 0.224696] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.224701] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.224705] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.224709] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.224713] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.224717] pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.224726] pci 0000:00:1c.0: BAR 15: assigned [mem 0x53700000-0x539fffff pref]
    [ 0.224731] pci 0000:00:1c.1: BAR 15: assigned [mem 0x53a00000-0x53bfffff 64bit pref]
    [ 0.224736] pci 0000:00:1c.2: BAR 15: assigned [mem 0x53c00000-0x53dfffff 64bit pref]
    [ 0.224740] pci 0000:00:1c.3: BAR 15: assigned [mem 0x53e00000-0x53ffffff 64bit pref]
    [ 0.224745] pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff]
    [ 0.224750] pci 0000:00:1c.2: BAR 13: assigned [io 0x6000-0x6fff]
    [ 0.224754] pci 0000:00:1c.3: BAR 13: assigned [io 0x7000-0x7fff]
    [ 0.224761] pci 0000:01:00.0: BAR 6: assigned [mem 0x53080000-0x530fffff pref]
    [ 0.224765] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.224770] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
    [ 0.224775] pci 0000:00:01.0: bridge window [mem 0x52000000-0x530fffff]
    [ 0.224780] pci 0000:00:01.0: bridge window [mem 0x40000000-0x51ffffff pref]
    [ 0.224788] pci 0000:02:00.0: BAR 6: assigned [mem 0x53700000-0x5370ffff pref]
    [ 0.224791] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 0.224796] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.224802] pci 0000:00:1c.0: bridge window [mem 0x53200000-0x532fffff]
    [ 0.224807] pci 0000:00:1c.0: bridge window [mem 0x53700000-0x539fffff pref]
    [ 0.224815] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 0.224819] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
    [ 0.224825] pci 0000:00:1c.1: bridge window [mem 0x53400000-0x534fffff]
    [ 0.224831] pci 0000:00:1c.1: bridge window [mem 0x53a00000-0x53bfffff 64bit pref]
    [ 0.224838] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
    [ 0.224842] pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff]
    [ 0.224849] pci 0000:00:1c.2: bridge window [mem 0x53500000-0x535fffff]
    [ 0.224854] pci 0000:00:1c.2: bridge window [mem 0x53c00000-0x53dfffff 64bit pref]
    [ 0.224861] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
    [ 0.224865] pci 0000:00:1c.3: bridge window [io 0x7000-0x7fff]
    [ 0.224872] pci 0000:00:1c.3: bridge window [mem 0x53600000-0x536fffff]
    [ 0.224877] pci 0000:00:1c.3: bridge window [mem 0x53e00000-0x53ffffff 64bit pref]
    [ 0.224885] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
    [ 0.224889] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
    [ 0.224895] pci 0000:00:1e.0: bridge window [mem 0x53100000-0x531fffff]
    [ 0.224959] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.224966] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
    [ 0.224969] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
    [ 0.224974] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
    [ 0.224977] pci_bus 0000:01: resource 1 [mem 0x52000000-0x530fffff]
    [ 0.224980] pci_bus 0000:01: resource 2 [mem 0x40000000-0x51ffffff pref]
    [ 0.224984] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.224987] pci_bus 0000:02: resource 1 [mem 0x53200000-0x532fffff]
    [ 0.224990] pci_bus 0000:02: resource 2 [mem 0x53700000-0x539fffff pref]
    [ 0.224994] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
    [ 0.224997] pci_bus 0000:03: resource 1 [mem 0x53400000-0x534fffff]
    [ 0.225001] pci_bus 0000:03: resource 2 [mem 0x53a00000-0x53bfffff 64bit pref]
    [ 0.225004] pci_bus 0000:04: resource 0 [io 0x6000-0x6fff]
    [ 0.225007] pci_bus 0000:04: resource 1 [mem 0x53500000-0x535fffff]
    [ 0.225011] pci_bus 0000:04: resource 2 [mem 0x53c00000-0x53dfffff 64bit pref]
    [ 0.225014] pci_bus 0000:05: resource 0 [io 0x7000-0x7fff]
    [ 0.225018] pci_bus 0000:05: resource 1 [mem 0x53600000-0x536fffff]
    [ 0.225021] pci_bus 0000:05: resource 2 [mem 0x53e00000-0x53ffffff 64bit pref]
    [ 0.225025] pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
    [ 0.225028] pci_bus 0000:06: resource 1 [mem 0x53100000-0x531fffff]
    [ 0.225031] pci_bus 0000:06: resource 4 [io 0x0000-0xffff]
    [ 0.225035] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff]
    [ 0.225091] NET: Registered protocol family 2
    [ 0.225171] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.225391] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.225895] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.226187] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.226190] TCP: reno registered
    [ 0.226195] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.226208] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.226329] NET: Registered protocol family 1
    [ 0.226637] pci 0000:01:00.0: Boot video device
    [ 0.226698] pci 0000:06:08.0: Firmware left e100 interrupts enabled; disabling
    [ 0.226709] PCI: CLS 0 bytes, default 64
    [ 0.226780] Unpacking initramfs...
    [ 0.315303] Freeing initrd memory: 2900k freed
    [ 0.317191] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    [ 0.317195] apm: disabled - APM is not SMP safe.
    [ 0.317515] audit: initializing netlink socket (disabled)
    [ 0.317533] type=2000 audit(1342552654.316:1): initialized
    [ 0.317976] highmem bounce pool size: 64 pages
    [ 0.317984] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.320723] VFS: Disk quotas dquot_6.5.2
    [ 0.320797] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.320931] msgmni has been set to 1740
    [ 0.321235] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.321282] io scheduler noop registered
    [ 0.321287] io scheduler deadline registered
    [ 0.321299] io scheduler cfq registered (default)
    [ 0.321473] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.321588] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [ 0.321708] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
    [ 0.321830] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
    [ 0.321950] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
    [ 0.322243] GHES: HEST is not enabled!
    [ 0.322264] isapnp: Scanning for PnP cards...
    [ 0.678327] isapnp: No Plug & Play device found
    [ 0.678412] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.698985] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.720023] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.720384] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [ 0.723503] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.723558] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.723755] mousedev: PS/2 mouse device common for all mice
    [ 0.723869] rtc_cmos 00:03: RTC can wake from S4
    [ 0.724031] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 0.724060] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
    [ 0.724098] cpuidle: using governor ladder
    [ 0.724101] cpuidle: using governor menu
    [ 0.724316] TCP: cubic registered
    [ 0.724489] NET: Registered protocol family 10
    [ 0.724741] NET: Registered protocol family 17
    [ 0.724748] Registering the dns_resolver key type
    [ 0.724796] Using IPI No-Shortcut mode
    [ 0.724971] PM: Hibernation image not present or could not be loaded.
    [ 0.724985] registered taskstats version 1
    [ 0.725540] rtc_cmos 00:03: setting system clock to 2012-07-17 19:17:35 UTC (1342552655)
    [ 0.725588] Initializing network drop monitor service
    [ 0.726860] Freeing unused kernel memory: 524k freed
    [ 0.727195] Write protecting the kernel text: 3812k
    [ 0.727226] Write protecting the kernel read-only data: 1120k
    [ 0.740567] systemd-udevd[41]: starting version 186
    [ 0.742721] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.745749] SCSI subsystem initialized
    [ 0.749328] libata version 3.00 loaded.
    [ 0.750857] ahci 0000:02:00.0: version 3.0
    [ 0.750961] ahci 0000:02:00.0: irq 45 for MSI/MSI-X
    [ 0.751021] ahci: SSS flag set, parallel bus scan disabled
    [ 0.751069] ahci 0000:02:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
    [ 0.751077] ahci 0000:02:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
    [ 0.752850] scsi0 : ahci
    [ 0.753200] scsi1 : ahci
    [ 0.753383] ata1: SATA max UDMA/133 abar m512@0x53200000 port 0x53200100 irq 45
    [ 0.753391] ata2: SATA max UDMA/133 abar m512@0x53200000 port 0x53200180 irq 45
    [ 1.240043] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1.252105] ata1.00: ATA-8: OCZ-SOLID3, 2.15, max UDMA/133
    [ 1.252110] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.262069] ata1.00: configured for UDMA/133
    [ 1.262262] scsi 0:0:0:0: Direct-Access ATA OCZ-SOLID3 2.15 PQ: 0 ANSI: 5
    [ 1.264029] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
    [ 1.264196] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.264203] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.264257] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.265654] sda: sda1 sda2 sda3 sda4
    [ 1.266383] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.320034] Refined TSC clocksource calibration: 2999.980 MHz.
    [ 1.320041] Switching to clocksource tsc
    [ 1.746702] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1.747318] ata2.00: ATA-8: ST3000DM001-9YN166, CC4C, max UDMA/133
    [ 1.747323] ata2.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [ 1.747889] ata2.00: configured for UDMA/133
    [ 1.748030] scsi 1:0:0:0: Direct-Access ATA ST3000DM001-9YN1 CC4C PQ: 0 ANSI: 5
    [ 1.748540] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
    [ 1.748547] sd 1:0:0:0: [sdb] 4096-byte physical blocks
    [ 1.748667] sd 1:0:0:0: [sdb] Write Protect is off
    [ 1.748674] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 1.748725] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.793835] sdb: sdb1
    [ 1.794347] sd 1:0:0:0: [sdb] Attached SCSI disk
    [ 1.892420] usbcore: registered new interface driver usbfs
    [ 1.892471] usbcore: registered new interface driver hub
    [ 1.895559] ata_piix 0000:00:1f.1: version 2.13
    [ 1.895639] ata_piix 0000:00:1f.1: setting latency timer to 64
    [ 1.897473] usbcore: registered new device driver usb
    [ 1.898382] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.898429] scsi2 : ata_piix
    [ 1.899754] scsi3 : ata_piix
    [ 1.900600] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14
    [ 1.900605] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15
    [ 1.900676] ata4: port disabled--ignoring
    [ 1.901417] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    [ 1.901473] ata_piix 0000:00:1f.2: setting latency timer to 64
    [ 1.904508] scsi4 : ata_piix
    [ 1.905087] scsi5 : ata_piix
    [ 1.905220] ata5: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19
    [ 1.905227] ata6: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19
    [ 1.905347] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 1.905355] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 1.905401] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    [ 1.905444] ehci_hcd 0000:00:1d.7: debug port 1
    [ 1.905558] uhci_hcd: USB Universal Host Controller Interface driver
    [ 1.909355] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    [ 1.909393] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x53304000
    [ 1.916865] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 1.917873] hub 1-0:1.0: USB hub found
    [ 1.917883] hub 1-0:1.0: 8 ports detected
    [ 1.918079] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.918087] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 1.918109] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 1.918149] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
    [ 1.918445] hub 2-0:1.0: USB hub found
    [ 1.918456] hub 2-0:1.0: 2 ports detected
    [ 1.918663] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 1.918671] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 1.918692] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    [ 1.918728] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
    [ 1.919043] hub 3-0:1.0: USB hub found
    [ 1.919053] hub 3-0:1.0: 2 ports detected
    [ 1.919306] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 1.919314] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 1.919338] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    [ 1.919391] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
    [ 1.919771] hub 4-0:1.0: USB hub found
    [ 1.919781] hub 4-0:1.0: 2 ports detected
    [ 1.920058] uhci_hcd 0000:00:1d.3: setting latency timer to 64
    [ 1.920066] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [ 1.920085] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    [ 1.920162] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
    [ 1.920720] hub 5-0:1.0: USB hub found
    [ 1.920731] hub 5-0:1.0: 2 ports detected
    [ 2.068266] ata6.00: ATA-6: WDC WD2000JD-00HBB0, 08.02D08, max UDMA/133
    [ 2.068272] ata6.00: 390721968 sectors, multi 16: LBA48
    [ 2.074099] ata5.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
    [ 2.074104] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 2.081454] ata6.00: configured for UDMA/133
    [ 2.100167] ata5.01: ATA-8: ST3500418AS, CC34, max UDMA/133
    [ 2.100172] ata5.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 2.107102] ata5.00: configured for UDMA/133
    [ 2.162850] ata5.01: configured for UDMA/133
    [ 2.173642] ata3.00: ATAPI: SONY DVD RW DRU-530A, 2.1g, max UDMA/33
    [ 2.173649] ata3.01: ATAPI: LITE-ON DVDRW SOHW-1633S, BGS4, max UDMA/66
    [ 2.173654] ata3.01: limited to UDMA/33 due to 40-wire cable
    [ 2.186862] ata3.00: configured for UDMA/33
    [ 2.200194] ata3.01: configured for UDMA/33
    [ 2.201725] scsi 2:0:0:0: CD-ROM SONY DVD RW DRU-530A 2.1g PQ: 0 ANSI: 5
    [ 2.202839] scsi 2:0:1:0: CD-ROM LITE-ON DVDRW SOHW-1633S BGS4 PQ: 0 ANSI: 5
    [ 2.203271] scsi 4:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
    [ 2.203548] sd 4:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
    [ 2.203557] sd 4:0:0:0: [sdc] 4096-byte physical blocks
    [ 2.203683] sd 4:0:0:0: [sdc] Write Protect is off
    [ 2.203690] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    [ 2.203749] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.203803] scsi 4:0:1:0: Direct-Access ATA ST3500418AS CC34 PQ: 0 ANSI: 5
    [ 2.204553] scsi 5:0:0:0: Direct-Access ATA WDC WD2000JD-00H 08.0 PQ: 0 ANSI: 5
    [ 2.204737] sd 4:0:1:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 2.204849] sd 5:0:0:0: [sde] 390721968 512-byte logical blocks: (200 GB/186 GiB)
    [ 2.204969] sd 5:0:0:0: [sde] Write Protect is off
    [ 2.204976] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
    [ 2.205029] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.223374] usb 1-2: new high-speed USB device number 2 using ehci_hcd
    [ 2.225847] sdc: sdc1
    [ 2.225864] sd 4:0:1:0: [sdd] Write Protect is off
    [ 2.225872] sd 4:0:1:0: [sdd] Mode Sense: 00 3a 00 00
    [ 2.225944] sd 4:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.226606] sd 4:0:0:0: [sdc] Attached SCSI disk
    [ 2.242524] sdd: sdd1
    [ 2.243011] sd 4:0:1:0: [sdd] Attached SCSI disk
    [ 2.250598] sde: sde2 sde3 < sde5 sde6 >
    [ 2.251325] sd 5:0:0:0: [sde] Attached SCSI disk
    [ 2.263852] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
    [ 2.263860] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.265692] sr 2:0:0:0: Attached scsi CD-ROM sr0
    [ 2.269125] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
    [ 2.270115] sr 2:0:1:0: Attached scsi CD-ROM sr1
    [ 2.453377] usb 1-3: new high-speed USB device number 3 using ehci_hcd
    [ 2.630176] input: Western Digital My Book as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.1/input/input1
    [ 2.630296] generic-usb 0003:1058:1102.0001: input,hidraw0: USB HID v1.11 Device [Western Digital My Book] on usb-0000:00:1d.7-3/input1
    [ 2.630361] usbcore: registered new interface driver usbhid
    [ 2.630366] usbhid: USB HID core driver
    [ 2.720033] usb 1-5: new high-speed USB device number 4 using ehci_hcd
    [ 2.992001] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.123459] usb 5-1: new low-speed USB device number 2 using uhci_hcd
    [ 3.170371] systemd[1]: systemd 186 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP; arch)
    [ 3.189960] systemd[1]: Inserted module 'autofs4'
    [ 3.190421] systemd[1]: Set hostname to <bbq>.
    [ 3.347408] systemd[1]: Cannot add dependency job for unit exportfs.service, ignoring: Unit exportfs.service failed to load: No such file or directory. See system logs and 'systemctl status exportfs.service' for details.
    [ 3.347444] systemd[1]: Cannot add dependency job for unit arch-daemons.target, ignoring: Unit arch-daemons.target failed to load: No such file or directory. See system logs and 'systemctl status arch-daemons.target' for details.
    [ 3.347509] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    [ 3.600924] systemd-readahead[134]: Bumped block_nr parameter of 8:0 to 16384. This is a temporary hack and should be removed one day.
    [ 3.890242] systemd-udevd[139]: starting version 186
    [ 3.928976] systemd-journald[146]: Fixed max_use=50.2M max_size=6.2M min_size=64.0K keep_free=25.1M
    [ 3.929449] systemd-journald[146]: Vacuuming...
    [ 4.016020] FS-Cache: Loaded
    [ 4.026904] RPC: Registered named UNIX socket transport module.
    [ 4.026909] RPC: Registered udp transport module.
    [ 4.026912] RPC: Registered tcp transport module.
    [ 4.026914] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 4.068138] EXT4-fs (sda1): re-mounted. Opts: (null)
    [ 4.071885] NFS: Registering the id_resolver key type
    [ 4.071920] FS-Cache: Netfs 'nfs' registered for caching
    [ 4.090493] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    [ 4.103300] Installing knfsd (copyright (C) 1996 [email protected]).
    [ 4.106821] ACPI: Sleep Button [SLPB]
    [ 4.114494] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 4.114509] ACPI: Power Button [PWRF]
    [ 4.135074] parport_pc 00:07: reported by Plug and Play ACPI
    [ 4.135106] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
    [ 4.157067] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 4.178255] Linux agpgart interface v0.103
    [ 4.202375] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
    [ 4.203197] hda_intel: Disabling MSI
    [ 4.255263] intel_rng: Firmware space is locked read-only. If you can't or
    [ 4.255267] intel_rng: don't want to disable this in firmware setup, and if
    [ 4.255271] intel_rng: you are certain that your system has a functional
    [ 4.255274] intel_rng: RNG, try using the 'no_fwh_detect' option.
    [ 4.273750] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
    [ 4.273757] e100: Copyright(c) 1999-2006 Intel Corporation
    [ 4.274079] iTCO_vendor_support: vendor-support=0
    [ 4.285411] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 4.285661] iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x0460)
    [ 4.285769] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 4.380102] usbcore: registered new interface driver uas
    [ 4.415911] Initializing USB Mass Storage driver...
    [ 4.423630] scsi6 : usb-storage 1-3:1.0
    [ 4.423883] usbcore: registered new interface driver usb-storage
    [ 4.423888] USB Mass Storage support registered.
    [ 4.426642] e100 0000:06:08.0: eth0: addr 0x53100000, irq 20, MAC addr 00:11:11:9d:19:91
    [ 4.434273] scsi7 : usb-storage 1-5:1.0
    [ 4.434499] usbcore: registered new interface driver ums-cypress
    [ 4.475410] psmouse serio1: hgpk: ID: 10 00 64
    [ 4.480175] firewire_ohci 0000:06:05.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
    [ 4.487522] microcode: CPU0 sig=0xf41, pf=0x10, revision=0xd
    [ 4.506728] Registered IR keymap rc-ati-x10
    [ 4.507019] input: X10 Wireless Technology Inc USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/rc/rc0/input5
    [ 4.507357] rc0: X10 Wireless Technology Inc USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/rc/rc0
    [ 4.507587] input: X10 Wireless Technology Inc USB Receiver mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input6
    [ 4.507783] usbcore: registered new interface driver ati_remote
    [ 4.530507] psmouse serio1: logips2pp: Detected unknown Logitech mouse model 127
    [ 4.687581] ppdev: user-space parallel port driver
    [ 4.761362] Adding 1047928k swap on /dev/sda2. Priority:-1 extents:1 across:1047928k SS
    [ 4.804984] microcode: CPU1 sig=0xf41, pf=0x10, revision=0xd
    [ 4.814875] nvidia: module license 'NVIDIA' taints kernel.
    [ 4.814882] Disabling lock debugging due to kernel taint
    [ 4.822000] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 4.926478] fuse init (API version 7.18)
    [ 4.970217] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
    [ 4.971016] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
    [ 4.971676] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
    [ 4.971943] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
    [ 4.980870] firewire_core 0000:06:05.0: created device fw0: GUID 00111100009d1991, S400
    [ 4.981627] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 4.982035] NVRM: loading NVIDIA UNIX x86 Kernel Module 302.17 Tue Jun 12 18:37:51 PDT 2012
    [ 5.031213] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input11
    [ 5.432483] scsi 6:0:0:0: Direct-Access WD My Book 1028 PQ: 0 ANSI: 4
    [ 5.436924] sd 6:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 5.437226] scsi 7:0:0:0: Direct-Access WDC WD25 00JB-00GVA0 PQ: 0 ANSI: 0
    [ 5.438100] sd 7:0:0:0: [sdg] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    [ 5.439101] sd 7:0:0:0: [sdg] Write Protect is off
    [ 5.439109] sd 7:0:0:0: [sdg] Mode Sense: 33 00 00 00
    [ 5.439482] sd 6:0:0:0: [sdf] Write Protect is off
    [ 5.439489] sd 6:0:0:0: [sdf] Mode Sense: 10 00 00 00
    [ 5.440101] sd 7:0:0:0: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    [ 5.442224] sd 6:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 5.463763] sdg: sdg1 sdg2
    [ 5.467100] sd 7:0:0:0: [sdg] Attached SCSI disk
    [ 5.469267] sdf: sdf1
    [ 5.491846] sd 6:0:0:0: [sdf] Attached SCSI disk
    [ 36.480046] usb 1-5: reset high-speed USB device number 4 using ehci_hcd
    [ 37.347138] systemd-journald[146]: Fixed max_use=1.4G max_size=128.0M min_size=64.0K keep_free=765.3M
    [ 37.347165] systemd-journald[146]: Flushing to /var...
    [ 37.837240] EXT4-fs (sdf1): mounted filesystem with ordered data mode. Opts: (null)
    [ 37.906826] EXT4-fs (sdg2): mounted filesystem with ordered data mode. Opts: (null)
    [ 38.068461] EXT4-fs (sde6): mounted filesystem with ordered data mode. Opts: (null)
    [ 38.194403] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    [ 38.740678] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
    [ 38.747081] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
    [ 39.486016] ip_tables: (C) 2000-2006 Netfilter Core Team
    [ 39.599796] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
    [ 39.600119] NFSD: starting 90-second grace period
    [ 40.579508] Netfilter messages via NETLINK v0.30.
    [ 40.594917] nf_conntrack version 0.5.0 (16078 buckets, 64312 max)
    [ 40.746099] ip6_tables: (C) 2000-2006 Netfilter Core Team
    [ 40.747318] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
    [ 40.747325] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
    [ 40.786415] ctnetlink v0.93: registering with nfnetlink.
    [ 40.886321] ip_set: protocol 6
    [ 40.898284] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
    [ 41.762042] xt_time: kernel timezone is -0000
    [ 42.318176] Bridge firewalling registered
    [ 42.704278] u32 classifier
    [ 42.704284] input device check on
    [ 42.704287] Actions configured
    [ 43.154527] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 43.156826] e100 0000:06:08.0: eth0: NIC Link is Up 100 Mbps Full Duplex
    [ 43.157214] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 44.557798] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    [ 44.872612] [drm] Initialized drm 1.1.0 20060810
    [ 44.881629] wmi: Mapper loaded
    [ 51.096207] zram: module is from the staging directory, the quality is unknown, you have been warned.
    [ 51.105163] zram: Unknown parameter `zram_num_devices'
    [ 51.148183] zram: module is from the staging directory, the quality is unknown, you have been warned.
    [ 51.148690] zram: Creating 2 devices ...
    [ 51.398897] Adding 514496k swap on /dev/zram0. Priority:100 extents:1 across:514496k SS
    [ 51.406500] Adding 514496k swap on /dev/zram1. Priority:100 extents:1 across:514496k SS
    [ 76.005728] bootchart-collector started as pid 1586 with 2 args: '--dump' '/tmp/bootchart.94K3Fb6yom'
    [ 76.005734] Extracting profile data from pid 178
    [ 76.005736] map 0xbfe14000 -> 0xbfe35000 size: 132k from 'bfe14000' 'bfe35000'
    [ 76.005739] read 135168 bytes of 135168
    [ 76.005741] reading 101 chunks (of 101) ... wrote 12527 kb
    [ 76.005743] bootchart-collector pid: 1586 unmounted proc / clean exit
    Linux 3.3.8-1, Nvidia 295.49-1 Dmesg Output
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.3.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120505 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jun 5 13:24:07 UTC 2012
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe54000 (usable)
    [ 0.000000] BIOS-e820: 000000003fe54000 - 000000003fee8000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000003fee8000 - 000000003ff00000 (ACPI data)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.3 present.
    [ 0.000000] DMI: 507GR /D915GAG, BIOS AG91510J.15A.0816.2005.0214.1818 02/14/2005
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0x3fe54 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask FC0000000 write-back
    [ 0.000000] 1 base 03FF00000 mask FFFF00000 uncachable
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [c00fe650] fe650
    [ 0.000000] initial memory mapped : 0 - 00c00000
    [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ bfb000-c00000
    [ 0.000000] RAMDISK: 3fb70000 - 3fe44000
    [ 0.000000] Allocated new RAMDISK: 3752a000 - 377fd833
    [ 0.000000] Move RAMDISK from 000000003fb70000 - 000000003fe43832 to 3752a000 - 377fd832
    [ 0.000000] ACPI: RSDP 000fe020 00014 (v00 GATEWA)
    [ 0.000000] ACPI: RSDT 3fefde48 00038 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: FACP 3fefcf10 00074 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: DSDT 3fef8010 0339C (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: FACS 3fee5c40 00040
    [ 0.000000] ACPI: APIC 3fefce10 00068 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: WDDT 3fef7f90 00040 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: MCFG 3fef7f10 0003C (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 3fef6d90 00124 (v01 GATEWA CpuPm 00000330 MSFT 01000013)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 134MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x0003fe54
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x0003fe54
    [ 0.000000] On node 0 totalpages: 261603
    [ 0.000000] free_area_init_node: node 0, pgdat c060c580, node_mem_map f6d29200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 269 pages used for memmap
    [ 0.000000] HighMem zone: 34121 pages, LIFO batch:7
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 3ff00000 (gap: 3ff00000:c0100000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 13 pages/cpu @f6d08000 s30848 r0 d22400 u53248
    [ 0.000000] pcpu-alloc: s30848 r0 d22400 u53248 alloc=13*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259558
    [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/10f8033d-8fe9-46be-bccf-68a14025bbaa ro init=/bin/systemd
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] allocated 2093600 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0003fe54)
    [ 0.000000] Memory: 1025660k/1046864k available (3774k kernel code, 20752k reserved, 1434k data, 520k init, 137560k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc0617000 - 0xc0699000 ( 520 kB)
    [ 0.000000] .data : 0xc04af9a9 - 0xc0616400 (1434 kB)
    [ 0.000000] .text : 0xc0100000 - 0xc04af9a9 (3774 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:2304 nr_irqs:512 16
    [ 0.000000] CPU 0 irqstacks, hard=f6408000 soft=f640a000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 3000.097 MHz processor.
    [ 0.006668] Calibrating delay loop (skipped), value calculated using timer frequency.. 6002.20 BogoMIPS (lpj=10000323)
    [ 0.006674] pid_max: default: 32768 minimum: 301
    [ 0.006706] Security Framework initialized
    [ 0.006712] AppArmor: AppArmor disabled by boot time parameter
    [ 0.006735] Mount-cache hash table entries: 512
    [ 0.006921] Initializing cgroup subsys cpuacct
    [ 0.006925] Initializing cgroup subsys memory
    [ 0.006936] Initializing cgroup subsys devices
    [ 0.006939] Initializing cgroup subsys freezer
    [ 0.006942] Initializing cgroup subsys net_cls
    [ 0.006945] Initializing cgroup subsys blkio
    [ 0.006989] CPU: Physical Processor ID: 0
    [ 0.006992] CPU: Processor Core ID: 0
    [ 0.006995] mce: CPU supports 4 MCE banks
    [ 0.007009] CPU0: Thermal monitoring enabled (TM1)
    [ 0.007014] using mwait in idle threads.
    [ 0.010636] ACPI: Core revision 20120111
    [ 0.013347] ftrace: allocating 16622 entries in 33 pages
    [ 0.020077] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.020459] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.054563] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
    [ 0.056663] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
    [ 0.056663] ... version: 0
    [ 0.056663] ... bit width: 40
    [ 0.056663] ... generic registers: 18
    [ 0.056663] ... value mask: 000000ffffffffff
    [ 0.056663] ... max period: 0000007fffffffff
    [ 0.056663] ... fixed-purpose events: 0
    [ 0.056663] ... event mask: 000000000003ffff
    [ 0.073415] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.100018] CPU 1 irqstacks, hard=f64a4000 soft=f64a6000
    [ 0.100021] Booting Node 0, Processors #1 Ok.
    [ 0.100025] smpboot cpu 1: start_ip = 9a000
    [ 0.009999] Initializing CPU#1
    [ 0.113372] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.120000] Brought up 2 CPUs
    [ 0.120006] Total of 2 processors activated (12005.40 BogoMIPS).
    [ 0.120978] devtmpfs: initialized
    [ 0.120978] PM: Registering ACPI NVS region at 3fe54000 (606208 bytes)
    [ 0.120978] NET: Registered protocol family 16
    [ 0.120978] ACPI: bus type pci registered
    [ 0.120978] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.120978] PCI: not using MMCONFIG
    [ 0.123293] PCI: Using configuration type 1 for base access
    [ 0.126717] bio: create slab <bio-0> at 0
    [ 0.126739] ACPI: Added _OSI(Module Device)
    [ 0.126739] ACPI: Added _OSI(Processor Device)
    [ 0.126739] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.126739] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.127496] ACPI: EC: Look up EC in DSDT
    [ 0.127496] ACPI: Interpreter enabled
    [ 0.127496] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.127496] ACPI: Using IOAPIC for interrupt routing
    [ 0.127496] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.127496] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.127496] PCI: Using MMCONFIG for extended config space
    [ 0.131872] ACPI: No dock devices found.
    [ 0.131883] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [ 0.133334] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.136111] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    [ 0.136116] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
    [ 0.136120] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [ 0.136123] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000fffff] (ignored)
    [ 0.136127] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfbffffff] (ignored)
    [ 0.136131] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xe0000000] (ignored)
    [ 0.136134] PCI: root bus 00: using default resources
    [ 0.136196] PCI host bridge to bus 0000:00
    [ 0.136201] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
    [ 0.136206] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
    [ 0.136220] pci 0000:00:00.0: [8086:2580] type 0 class 0x000600
    [ 0.136283] pci 0000:00:01.0: [8086:2581] type 1 class 0x000604
    [ 0.136340] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.13639

    And here is the output of alsa-info.sh which I have also added to the original post:
    upload=true&script=true&cardinfo=
    !!ALSA Information Script v 0.4.61
    !!Script ran on: Wed Jul 18 00:10:56 UTC 2012
    !!Linux Distribution
    Arch Linux \r (\l) DISTRIB_ID=archlinux DISTRIB_DESCRIPTION="Arch Linux" NAME="Arch Linux" ID=arch PRETTY_NAME="Arch Linux" HOME_URL="http://www.archlinux.org/" SUPPORT_URL="https://bbs.archlinux.org/" BUG_REPORT_URL="https://bugs.archlinux.org/"
    !!DMI Information
    Manufacturer:
    Product Name: 507GR
    Product Version:
    Firmware Version: AG91510J.15A.0816.2005.0214.1818
    !!Kernel Information
    Kernel release: 3.4.4-3-ARCH
    Operating System: GNU/Linux
    Architecture: i686
    Processor: unknown
    SMP Enabled: Yes
    !!ALSA Version
    Driver version: 1.0.25
    Library version: 1.0.25
    Utilities version: 1.0.25
    !!Loaded ALSA modules
    snd_hda_intel
    snd_hda_intel
    !!Sound Servers on this system
    Jack:
    Installed - Yes (/usr/bin/jackd)
    Running - No
    !!Soundcards recognised by ALSA
    0 [Intel ]: HDA-Intel - HDA Intel
    HDA Intel at 0x53300000 irq 46
    1 [NVidia ]: HDA-Intel - HDA NVidia
    HDA NVidia at 0x53000000 irq 17
    !!PCI Soundcards installed in the system
    00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)
    01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)
    !!Advanced information - PCI Vendor/Device/Subsystem ID's
    00:1b.0 0403: 8086:2668 (rev 03)
    Subsystem: 107b:4037
    01:00.1 0403: 10de:0be3 (rev a1)
    Subsystem: 1043:8354
    !!Loaded sound module options
    !!Module: snd_hda_intel
    align_buffer_size : -1
    bdl_pos_adj : 1,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    beep_mode : 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
    enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
    enable_msi : -1
    id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    power_save : 0
    power_save_controller : Y
    probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    single_cmd : N
    snoop : Y
    !!Module: snd_hda_intel
    align_buffer_size : -1
    bdl_pos_adj : 1,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    beep_mode : 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
    enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
    enable_msi : -1
    id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    power_save : 0
    power_save_controller : Y
    probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    single_cmd : N
    snoop : Y
    !!HDA-Intel Codec information
    --startcollapse--
    Codec: Realtek ALC880
    Address: 2
    AFG Function Id: 0x1 (unsol 0)
    Vendor Id: 0x10ec0880
    Subsystem Id: 0x08600000
    Revision Id: 0x90000
    No Modem Function Group found
    Default PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Default Amp-In caps: N/A
    Default Amp-Out caps: N/A
    GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
    IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
    IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
    Node 0x02 [Audio Output] wcaps 0x411: Stereo
    Converter: stream=0, channel=0
    PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Node 0x03 [Audio Output] wcaps 0x411: Stereo
    Converter: stream=0, channel=0
    PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Node 0x04 [Audio Output] wcaps 0x411: Stereo
    Converter: stream=0, channel=0
    PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Node 0x05 [Audio Output] wcaps 0x411: Stereo
    Converter: stream=0, channel=0
    PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x1e]: 16 20 24 32
    formats [0x1]: PCM
    Node 0x07 [Vendor Defined Widget] wcaps 0xf0051b: Stereo Amp-In
    Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
    Amp-In vals:
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Connection: 0
    Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
    Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
    Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
    Converter: stream=0, channel=0
    SDI-Select: 0
    PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x6]: 16 20
    formats [0x1]: PCM
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Connection: 7
    0x18 0x19 0x1a* 0x1b 0x1c 0x14 0x15
    Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
    Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
    Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
    Converter: stream=0, channel=0
    SDI-Select: 0
    PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x6]: 16 20
    formats [0x1]: PCM
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Connection: 10
    0x18 0x19 0x1a 0x1b 0x1c* 0x0b 0x14 0x15 0x16 0x17
    Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital
    Converter: stream=0, channel=0
    SDI-Select: 0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x1e]: 16 20 24 32
    formats [0x1]: PCM
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x1f
    Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
    Control: name="Beep Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=5, ofs=0
    Control: name="Beep Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=5, ofs=0
    Amp-In caps: ofs=0x23, nsteps=0x41, stepsize=0x03, mute=1
    Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0xa3 0xa3] [0x80 0x80] [0x80 0x80]
    Connection: 8
    0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15
    Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-In vals: [0x00 0x00] [0x80 0x80]
    Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
    Amp-Out vals: [0x40 0x40]
    Connection: 2
    0x02 0x0b
    Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-In vals: [0x00 0x00] [0x80 0x80]
    Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
    Amp-Out vals: [0x40 0x40]
    Connection: 2
    0x03 0x0b
    Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-In vals: [0x00 0x00] [0x80 0x80]
    Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
    Amp-Out vals: [0x40 0x40]
    Connection: 2
    0x04 0x0b
    Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-In vals: [0x00 0x00] [0x80 0x80]
    Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
    Amp-Out vals: [0x40 0x40]
    Connection: 2
    0x05 0x0b
    Node 0x10 [Audio Selector] wcaps 0x300101: Stereo
    Connection: 4
    0x0c* 0x0d 0x0e 0x0f
    Node 0x11 [Audio Selector] wcaps 0x300101: Stereo
    Connection: 4
    0x0c* 0x0d 0x0e 0x0f
    Node 0x12 [Audio Selector] wcaps 0x300101: Stereo
    Connection: 4
    0x0c* 0x0d 0x0e 0x0f
    Node 0x13 [Audio Selector] wcaps 0x300101: Stereo
    Connection: 4
    0x0c* 0x0d 0x0e 0x0f
    Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x40: OUT
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x0c
    Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x40: OUT
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x0d
    Node 0x16 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x40: OUT
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x0e
    Node 0x17 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x40: OUT
    Unsolicited: tag=00, enabled=0
    Connection: 0
    Node 0x18 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000133f: IN OUT HP Detect Trigger ImpSense
    Vref caps: HIZ 50 80
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x20: IN VREF_HIZ
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x10
    Node 0x19 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000133f: IN OUT HP Detect Trigger ImpSense
    Vref caps: HIZ 50 80
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x20: IN VREF_HIZ
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x11
    Node 0x1a [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Control: name="Line Jack", index=0, device=0
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000133f: IN OUT HP Detect Trigger ImpSense
    Vref caps: HIZ 50 80
    Pin Default 0x01810000: [Jack] Line In at Ext Rear
    Conn = 1/8, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x20: IN VREF_HIZ
    Unsolicited: tag=01, enabled=1
    Connection: 1
    0x12
    Node 0x1b [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000133f: IN OUT HP Detect Trigger ImpSense
    Vref caps: HIZ 50 80
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x20: IN VREF_HIZ
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x13
    Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
    Pincap 0x00000020: IN
    Pin Default 0x40000000: [N/A] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x00:
    Node 0x1d [Pin Complex] wcaps 0x400000: Mono
    Pincap 0x00000020: IN
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x00:
    Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
    Pincap 0x00000010: OUT
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x00:
    Connection: 1
    0x06
    Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital
    Pincap 0x00000020: IN
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x00:
    Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
    Processing caps: benign=0, ncoeff=10
    Node 0x21 [Volume Knob Widget] wcaps 0x600080: Mono
    Volume-Knob: delta=0, steps=64, direct=0, val=0
    Unsolicited: tag=00, enabled=0
    Connection: 0
    Codec: Nvidia GPU 0b HDMI/DP
    Address: 0
    AFG Function Id: 0x1 (unsol 0)
    Vendor Id: 0x10de000b
    Subsystem Id: 0x10de0101
    Revision Id: 0x100200
    No Modem Function Group found
    Default PCM:
    rates [0x0]:
    bits [0x0]:
    formats [0x0]:
    Default Amp-In caps: N/A
    Default Amp-Out caps: N/A
    GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
    Node 0x04 [Audio Output] wcaps 0x72b1: 8-Channels Digital Stripe CP
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
    Unsolicited: tag=00, enabled=0
    Node 0x05 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP
    Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
    Control: name="IEC958 Playback Con Mask", index=0, device=0
    Control: name="IEC958 Playback Pro Mask", index=0, device=0
    Control: name="IEC958 Playback Default", index=0, device=0
    Control: name="IEC958 Playback Switch", index=0, device=0
    Control: name="ELD", index=0, device=3
    Pincap 0x09000094: OUT Detect HBR HDMI DP
    Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Pin-ctls: 0x00:
    Unsolicited: tag=01, enabled=1
    Connection: 1
    0x04
    Codec: Nvidia GPU 0b HDMI/DP
    Address: 1
    AFG Function Id: 0x1 (unsol 0)
    Vendor Id: 0x10de000b
    Subsystem Id: 0x10de0101
    Revision Id: 0x100200
    No Modem Function Group found
    Default PCM:
    rates [0x0]:
    bits [0x0]:
    formats [0x0]:
    Default Amp-In caps: N/A
    Default Amp-Out caps: N/A
    GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
    Node 0x04 [Audio Output] wcaps 0x72b1: 8-Channels Digital Stripe CP
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
    Unsolicited: tag=00, enabled=0
    Node 0x05 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP
    Control: name="HDMI/DP,pcm=7 Jack", index=0, device=0
    Control: name="IEC958 Playback Con Mask", index=1, device=0
    Control: name="IEC958 Playback Pro Mask", index=1, device=0
    Control: name="IEC958 Playback Default", index=1, device=0
    Control: name="IEC958 Playback Switch", index=1, device=0
    Control: name="ELD", index=0, device=7
    Pincap 0x09000094: OUT Detect HBR HDMI DP
    Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Pin-ctls: 0x00:
    Unsolicited: tag=01, enabled=1
    Connection: 1
    0x04
    Codec: Nvidia GPU 0b HDMI/DP
    Address: 2
    AFG Function Id: 0x1 (unsol 0)
    Vendor Id: 0x10de000b
    Subsystem Id: 0x10de0101
    Revision Id: 0x100200
    No Modem Function Group found
    Default PCM:
    rates [0x0]:
    bits [0x0]:
    formats [0x0]:
    Default Amp-In caps: N/A
    Default Amp-Out caps: N/A
    GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
    Node 0x04 [Audio Output] wcaps 0x72b1: 8-Channels Digital Stripe CP
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
    Unsolicited: tag=00, enabled=0
    Node 0x05 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP
    Control: name="HDMI/DP,pcm=8 Jack", index=0, device=0
    Control: name="IEC958 Playback Con Mask", index=2, device=0
    Control: name="IEC958 Playback Pro Mask", index=2, device=0
    Control: name="IEC958 Playback Default", index=2, device=0
    Control: name="IEC958 Playback Switch", index=2, device=0
    Control: name="ELD", index=0, device=8
    Pincap 0x09000094: OUT Detect HBR HDMI DP
    Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Pin-ctls: 0x00:
    Unsolicited: tag=01, enabled=1
    Connection: 1
    0x04
    Codec: Nvidia GPU 0b HDMI/DP
    Address: 3
    AFG Function Id: 0x1 (unsol 0)
    Vendor Id: 0x10de000b
    Subsystem Id: 0x10de0101
    Revision Id: 0x100200
    No Modem Function Group found
    Default PCM:
    rates [0x0]:
    bits [0x0]:
    formats [0x0]:
    Default Amp-In caps: N/A
    Default Amp-Out caps: N/A
    GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
    Node 0x04 [Audio Output] wcaps 0x72b1: 8-Channels Digital Stripe CP
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
    Unsolicited: tag=00, enabled=0
    Node 0x05 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP
    Control: name="HDMI/DP,pcm=9 Jack", index=0, device=0
    Control: name="IEC958 Playback Con Mask", index=3, device=0
    Control: name="IEC958 Playback Pro Mask", index=3, device=0
    Control: name="IEC958 Playback Default", index=3, device=0
    Control: name="IEC958 Playback Switch", index=3, device=0
    Control: name="ELD", index=0, device=9
    Pincap 0x09000094: OUT Detect HBR HDMI DP
    Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Pin-ctls: 0x00:
    Unsolicited: tag=01, enabled=1
    Connection: 1
    0x04
    --endcollapse--
    !!ALSA Device nodes
    crw-rw----+ 1 root audio 116, 3 Jul 17 17:07 /dev/snd/controlC0
    crw-rw----+ 1 root audio 116, 12 Jul 17 17:07 /dev/snd/controlC1
    crw-rw----+ 1 root audio 116, 2 Jul 17 17:07 /dev/snd/hwC0D2
    crw-rw----+ 1 root audio 116, 11 Jul 17 17:07 /dev/snd/hwC1D0
    crw-rw----+ 1 root audio 116, 10 Jul 17 17:07 /dev/snd/hwC1D1
    crw-rw----+ 1 root audio 116, 9 Jul 17 17:07 /dev/snd/hwC1D2
    crw-rw----+ 1 root audio 116, 8 Jul 17 17:07 /dev/snd/hwC1D3
    crw-rw----+ 1 root audio 116, 7 Jul 17 17:07 /dev/snd/pcmC1D3p
    crw-rw----+ 1 root audio 116, 6 Jul 17 17:07 /dev/snd/pcmC1D7p
    crw-rw----+ 1 root audio 116, 5 Jul 17 17:07 /dev/snd/pcmC1D8p
    crw-rw----+ 1 root audio 116, 4 Jul 17 17:07 /dev/snd/pcmC1D9p
    crw-rw---- 1 root audio 116, 1 Jul 17 17:07 /dev/snd/seq
    crw-rw----+ 1 root audio 116, 33 Jul 17 17:07 /dev/snd/timer
    /dev/snd/by-path:
    total 0
    drwxr-xr-x 2 root root 80 Jul 17 17:07 .
    drwxr-xr-x 3 root root 320 Jul 17 17:07 ..
    lrwxrwxrwx 1 root root 12 Jul 17 17:07 pci-0000:00:1b.0 -> ../controlC0
    lrwxrwxrwx 1 root root 12 Jul 17 17:07 pci-0000:01:00.1 -> ../controlC1
    !!Aplay/Arecord output
    APLAY
    **** List of PLAYBACK Hardware Devices ****
    card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    ARECORD
    **** List of CAPTURE Hardware Devices ****
    !!Amixer output
    !!-------Mixer controls for card 0 [Intel]
    Card hw:0 'Intel'/'HDA Intel at 0x53300000 irq 46'
    Mixer name : 'Realtek ALC880'
    Components : 'HDA:10ec0880,08600000,00090000'
    Controls : 4
    Simple ctrls : 2
    Simple mixer control 'PCM',0
    Capabilities: pvolume penum
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 255
    Mono:
    Front Left: Playback 255 [100%] [0.00dB]
    Front Right: Playback 255 [100%] [0.00dB]
    Simple mixer control 'Beep',0
    Capabilities: pvolume pswitch penum
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 65
    Mono:
    Front Left: Playback 35 [54%] [0.00dB] [off]
    Front Right: Playback 35 [54%] [0.00dB] [off]
    !!-------Mixer controls for card 1 [NVidia]
    Card hw:1 'NVidia'/'HDA NVidia at 0x53000000 irq 17'
    Mixer name : 'Nvidia GPU 0b HDMI/DP'
    Components : 'HDA:10de000b,10de0101,00100200'
    Controls : 24
    Simple ctrls : 4
    Simple mixer control 'IEC958',0
    Capabilities: pswitch pswitch-joined penum
    Playback channels: Mono
    Mono: Playback [on]
    Simple mixer control 'IEC958',1
    Capabilities: pswitch pswitch-joined penum
    Playback channels: Mono
    Mono: Playback [on]
    Simple mixer control 'IEC958',2
    Capabilities: pswitch pswitch-joined penum
    Playback channels: Mono
    Mono: Playback [on]
    Simple mixer control 'IEC958',3
    Capabilities: pswitch pswitch-joined penum
    Playback channels: Mono
    Mono: Playback [on]
    !!Alsactl output
    --startcollapse--
    state.Intel {
    control.1 {
    iface MIXER
    name 'Beep Playback Volume'
    value.0 35
    value.1 35
    comment {
    access 'read write'
    type INTEGER
    count 2
    range '0 - 65'
    dbmin -3500
    dbmax 3000
    dbvalue.0 0
    dbvalue.1 0
    control.2 {
    iface MIXER
    name 'Beep Playback Switch'
    value.0 false
    value.1 false
    comment {
    access 'read write'
    type BOOLEAN
    count 2
    control.3 {
    iface CARD
    name 'Line Jack'
    value false
    comment {
    access read
    type BOOLEAN
    count 1
    control.4 {
    iface MIXER
    name 'PCM Playback Volume'
    value.0 255
    value.1 255
    comment {
    access 'read write user'
    type INTEGER
    count 2
    range '0 - 255'
    tlv '0000000100000008ffffec1400000014'
    dbmin -5100
    dbmax 0
    dbvalue.0 0
    dbvalue.1 0
    state.NVidia {
    control.1 {
    iface CARD
    name 'HDMI/DP,pcm=3 Jack'
    value false
    comment {
    access read
    type BOOLEAN
    count 1
    control.2 {
    iface MIXER
    name 'IEC958 Playback Con Mask'
    value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.3 {
    iface MIXER
    name 'IEC958 Playback Pro Mask'
    value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.4 {
    iface MIXER
    name 'IEC958 Playback Default'
    value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access 'read write'
    type IEC958
    count 1
    control.5 {
    iface MIXER
    name 'IEC958 Playback Switch'
    value true
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.6 {
    iface PCM
    device 3
    name ELD
    value ''
    comment {
    access read
    type BYTES
    count 0
    control.7 {
    iface CARD
    name 'HDMI/DP,pcm=7 Jack'
    value false
    comment {
    access read
    type BOOLEAN
    count 1
    control.8 {
    iface MIXER
    name 'IEC958 Playback Con Mask'
    index 1
    value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.9 {
    iface MIXER
    name 'IEC958 Playback Pro Mask'
    index 1
    value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.10 {
    iface MIXER
    name 'IEC958 Playback Default'
    index 1
    value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access 'read write'
    type IEC958
    count 1
    control.11 {
    iface MIXER
    name 'IEC958 Playback Switch'
    index 1
    value true
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.12 {
    iface PCM
    device 7
    name ELD
    value ''
    comment {
    access read
    type BYTES
    count 0
    control.13 {
    iface CARD
    name 'HDMI/DP,pcm=8 Jack'
    value false
    comment {
    access read
    type BOOLEAN
    count 1
    control.14 {
    iface MIXER
    name 'IEC958 Playback Con Mask'
    index 2
    value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.15 {
    iface MIXER
    name 'IEC958 Playback Pro Mask'
    index 2
    value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.16 {
    iface MIXER
    name 'IEC958 Playback Default'
    index 2
    value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access 'read write'
    type IEC958
    count 1
    control.17 {
    iface MIXER
    name 'IEC958 Playback Switch'
    index 2
    value true
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.18 {
    iface PCM
    device 8
    name ELD
    value ''
    comment {
    access read
    type BYTES
    count 0
    control.19 {
    iface CARD
    name 'HDMI/DP,pcm=9 Jack'
    value false
    comment {
    access read
    type BOOLEAN
    count 1
    control.20 {
    iface MIXER
    name 'IEC958 Playback Con Mask'
    index 3
    value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.21 {
    iface MIXER
    name 'IEC958 Playback Pro Mask'
    index 3
    value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.22 {
    iface MIXER
    name 'IEC958 Playback Default'
    index 3
    value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access 'read write'
    type IEC958
    count 1
    control.23 {
    iface MIXER
    name 'IEC958 Playback Switch'
    index 3
    value true
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.24 {
    iface PCM
    device 9
    name ELD
    value ''
    comment {
    access read
    type BYTES
    count 0
    --endcollapse--
    !!All Loaded Modules
    Module
    zram
    lm85
    hwmon_vid
    aes_i586
    cryptd
    aes_generic
    act_police
    cls_basic
    cls_flow
    cls_fw
    cls_u32
    sch_tbf
    sch_prio
    sch_htb
    sch_hfsc
    sch_ingress
    sch_sfq
    bridge
    stp
    llc
    xt_statistic
    xt_CT
    xt_LOG
    xt_time
    xt_connlimit
    xt_realm
    xt_addrtype
    iptable_raw
    xt_comment
    xt_recent
    xt_policy
    ipt_ULOG
    ipt_REJECT
    ipt_REDIRECT
    ipt_NETMAP
    ipt_MASQUERADE
    ipt_ECN
    ipt_CLUSTERIP
    ipt_ah
    xt_set
    ip_set
    nf_nat_tftp
    nf_nat_snmp_basic
    nf_conntrack_snmp
    nf_nat_sip
    nf_nat_pptp
    nf_nat_proto_gre
    nf_nat_irc
    nf_nat_h323
    nf_nat_ftp
    nf_nat_amanda
    ts_kmp
    nf_conntrack_amanda
    nf_conntrack_sane
    nf_conntrack_tftp
    nf_conntrack_sip
    nf_conntrack_proto_udplite
    nf_conntrack_proto_sctp
    nf_conntrack_pptp
    nf_conntrack_proto_gre
    nf_conntrack_netlink
    nf_conntrack_netbios_ns
    nf_conntrack_broadcast
    nf_conntrack_irc
    nf_conntrack_h323
    nf_conntrack_ftp
    xt_TPROXY
    nf_defrag_ipv6
    nf_tproxy_core
    ip6_tables
    xt_tcpmss
    xt_pkttype
    xt_physdev
    xt_owner
    xt_NFQUEUE
    xt_NFLOG
    nfnetlink_log
    xt_multiport
    xt_mark
    xt_mac
    xt_limit
    xt_length
    xt_iprange
    xt_helper
    xt_hashlimit
    xt_DSCP
    xt_dscp
    xt_dccp
    xt_conntrack
    xt_connmark
    xt_CLASSIFY
    xt_AUDIT
    xt_state
    iptable_nat
    nf_nat
    nf_conntrack_ipv4
    nf_defrag_ipv4
    nf_conntrack
    iptable_mangle
    nfnetlink
    xt_tcpudp
    iptable_filter
    ip_tables
    x_tables
    arc4
    fuse
    nvidia
    snd_hda_codec_hdmi
    ppdev
    ath9k_htc
    ath9k_common
    microcode
    ath9k_hw
    ath
    serio_raw
    psmouse
    evdev
    mac80211
    ums_cypress
    cfg80211
    compat
    usb_storage
    rfkill
    i2c_i801
    uas
    rc_ati_x10
    iTCO_wdt
    firewire_ohci
    ati_remote
    iTCO_vendor_support
    e100
    firewire_core
    mii
    rc_core
    crc_itu_t
    snd_hda_codec_realtek
    parport_pc
    parport
    snd_hda_intel
    snd_hda_codec
    snd_pcm
    snd_page_alloc
    snd_hwdep
    snd_timer
    nfsd
    exportfs
    intel_agp
    intel_gtt
    snd
    nfs
    i2c_core
    agpgart
    nfs_acl
    lockd
    soundcore
    auth_rpcgss
    button
    processor
    sunrpc
    fscache
    autofs4
    ext4
    crc16
    jbd2
    mbcache
    usbhid
    hid
    sr_mod
    cdrom
    pata_acpi
    ata_generic
    uhci_hcd
    ata_piix
    ehci_hcd
    usbcore
    usb_common
    sd_mod
    ahci
    libahci
    libata
    scsi_mod
    !!Sysfs Files
    /sys/class/sound/hwC0D2/init_pin_configs:
    0x14 0x00000000
    0x15 0x00000000
    0x16 0x00000000
    0x17 0x00000000
    0x18 0x00000000
    0x19 0x00000000
    0x1a 0x01810000
    0x1b 0x00000000
    0x1c 0x40000000
    0x1d 0x00000000
    0x1e 0x00000000
    0x1f 0x00000000
    /sys/class/sound/hwC0D2/driver_pin_configs:
    /sys/class/sound/hwC0D2/user_pin_configs:
    /sys/class/sound/hwC0D2/init_verbs:
    /sys/class/sound/hwC1D0/init_pin_configs:
    0x05 0x18560010
    /sys/class/sound/hwC1D0/driver_pin_configs:
    /sys/class/sound/hwC1D0/user_pin_configs:
    /sys/class/sound/hwC1D0/init_verbs:
    /sys/class/sound/hwC1D1/init_pin_configs:
    0x05 0x18560010
    /sys/class/sound/hwC1D1/driver_pin_configs:
    /sys/class/sound/hwC1D1/user_pin_configs:
    /sys/class/sound/hwC1D1/init_verbs:
    /sys/class/sound/hwC1D2/init_pin_configs:
    0x05 0x18560010
    /sys/class/sound/hwC1D2/driver_pin_configs:
    /sys/class/sound/hwC1D2/user_pin_configs:
    /sys/class/sound/hwC1D2/init_verbs:
    /sys/class/sound/hwC1D3/init_pin_configs:
    0x05 0x18560010
    /sys/class/sound/hwC1D3/driver_pin_configs:
    /sys/class/sound/hwC1D3/user_pin_configs:
    /sys/class/sound/hwC1D3/init_verbs:
    !!ALSA/HDA dmesg
    [ 3.398568] Installing knfsd (copyright (C) 1996 [email protected]).
    [ 3.431145] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 3.462799] parport_pc 00:07: reported by Plug and Play ACPI
    [ 3.462832] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
    [ 3.467010] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
    [ 3.468096] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
    [ 3.471112] hda_intel: Disabling MSI
    [ 3.522125] intel_rng: Firmware space is locked read-only. If you can't or
    [ 4.173059] ath9k_htc 1-2:1.0: ath9k_htc: HTC initialized with 45 credits
    [ 4.263632] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
    [ 4.263914] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
    [ 4.264134] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
    [ 4.264423] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
    [ 4.267027] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    I'll also see what kind of help I can get from the developers upstream.

  • Laptop Keyboard doesnot work after grub

    Hello,
    My laptop's keyboard stops working after i select distro from grub menu. I've did huge amount of search but i'm hopeless right now.
    I'm using a usb keyboard and it works fine, my laptop's keyboard also works fine in windows and boot menu.
    I have x86-input-evdev and -keyboard for sure.
    I'm using SLIM+ i3w if you need this!
    What to do and where to go?!
    any way if u need my dmesg here it is:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.10.3-1-ARCH (tobias@testing-i686) (gcc version 4.8.1 (GCC) ) #1 SMP PREEMPT Fri Jul 26 17:13:15 CEST 2013
    [ 0.000000] Disabled fast string operations
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005f68ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000005f690000-0x000000005f699fff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000005f69a000-0x000000005f6fffff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000005f700000-0x000000005fffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000f0005fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0008000-0x00000000f000bfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed8ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] SMBIOS 2.3 present.
    [ 0.000000] DMI: LG Electronics LS75-25JLCE5/HUNTER, BIOS HURFSF07 09/28/2005
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] e820: last_pfn = 0x5f690 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E3FFF uncachable
    [ 0.000000] E4000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask FC0000000 write-back
    [ 0.000000] 1 base 040000000 mask FE0000000 write-back
    [ 0.000000] 2 base 05F700000 mask FFFF00000 uncachable
    [ 0.000000] 3 base 05F800000 mask FFF800000 uncachable
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] PAT not supported by CPU.
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x00bfffff]
    [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
    [ 0.000000] [mem 0x37000000-0x373fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
    [ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
    [ 0.000000] [mem 0x00100000-0x003fffff] page 4k
    [ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
    [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
    [ 0.000000] BRK [0x00849000, 0x00849fff] PGTABLE
    [ 0.000000] RAMDISK: [mem 0x37a12000-0x37d00fff]
    [ 0.000000] Allocated new RAMDISK: [mem 0x3750f000-0x377fda6a]
    [ 0.000000] Move RAMDISK from [mem 0x37a12000-0x37d00a6a] to [mem 0x3750f000-0x377fda6a]
    [ 0.000000] ACPI: RSDP 000f65b0 00014 (v00 PTLTD )
    [ 0.000000] ACPI: RSDT 5f690af0 0004C (v01 PTLTD HunterFL 06040000 LTP 00000000)
    [ 0.000000] ACPI: FACP 5f699e88 00074 (v01 LGE HunterFL 06040000 LGE 0000005F)
    [ 0.000000] ACPI: DSDT 5f691a5d 0842B (v01 LGE HUNTER 06040000 INTL 20030224)
    [ 0.000000] ACPI: FACS 5f6aafc0 00040
    [ 0.000000] ACPI: APIC 5f699efc 00068 (v01 INTEL ALVISO 06040000 LOHR 0000005F)
    [ 0.000000] ACPI: HPET 5f699f64 00038 (v01 INTEL ALVISO 06040000 LOHR 0000005F)
    [ 0.000000] ACPI: MCFG 5f699f9c 0003C (v01 INTEL ALVISO 06040000 LOHR 0000005F)
    [ 0.000000] ACPI: BOOT 5f699fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
    [ 0.000000] ACPI: SSDT 5f69182f 0022E (v01 SataRe SataAhci 00001000 INTL 20030224)
    [ 0.000000] ACPI: SSDT 5f69135a 004D5 (v01 LGE HNT_IGFX 00001000 INTL 20030224)
    [ 0.000000] ACPI: SSDT 5f690f15 00277 (v01 PmRef Cpu0Ist 00003000 INTL 20030224)
    [ 0.000000] ACPI: SSDT 5f690d55 001C0 (v01 PmRef Cpu0Cst 00003001 INTL 20030224)
    [ 0.000000] ACPI: SSDT 5f690b3c 00219 (v01 PmRef CpuPm 00003000 INTL 20030224)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 638MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] BRK [0x0084a000, 0x0084afff] PGTABLE
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] Normal [mem 0x01000000-0x377fdfff]
    [ 0.000000] HighMem [mem 0x377fe000-0x5f68ffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009efff]
    [ 0.000000] node 0: [mem 0x00100000-0x5f68ffff]
    [ 0.000000] On node 0 totalpages: 390702
    [ 0.000000] free_area_init_node: node 0, pgdat c06af240, node_mem_map f691f020
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 223230 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 1278 pages used for memmap
    [ 0.000000] HighMem zone: 163474 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
    [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
    [ 0.000000] e820: [mem 0x60000000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 14 pages/cpu @f68fa000 s33472 r0 d23872 u57344
    [ 0.000000] pcpu-alloc: s33472 r0 d23872 u57344 alloc=14*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 388926
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b68b701a-eb23-4df9-b3c8-ec3497d5f78f ro quiet
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] allocated 3126392 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0005f690)
    [ 0.000000] Memory: 1536040k/1563200k available (4154k kernel code, 26768k reserved, 1734k data, 596k init, 653896k highmem)
    [ 0.000000] virtual kernel memory layout:
    fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc06c1000 - 0xc0756000 ( 596 kB)
    .data : 0xc050e91e - 0xc06c0300 (1734 kB)
    .text : 0xc0100000 - 0xc050e91e (4154 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
    [ 0.000000] NR_IRQS:2304 nr_irqs:512 16
    [ 0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 1862.042 MHz processor
    [ 0.003335] Calibrating delay loop (skipped), value calculated using timer frequency.. 3725.25 BogoMIPS (lpj=6206806)
    [ 0.003339] pid_max: default: 32768 minimum: 301
    [ 0.003390] Security Framework initialized
    [ 0.003401] AppArmor: AppArmor disabled by boot time parameter
    [ 0.003415] Mount-cache hash table entries: 512
    [ 0.003697] Initializing cgroup subsys memory
    [ 0.003710] Initializing cgroup subsys devices
    [ 0.003713] Initializing cgroup subsys freezer
    [ 0.003715] Initializing cgroup subsys net_cls
    [ 0.003718] Initializing cgroup subsys blkio
    [ 0.003751] Disabled fast string operations
    [ 0.003759] mce: CPU supports 5 MCE banks
    [ 0.003768] CPU0: Thermal monitoring enabled (TM1)
    [ 0.003779] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
    Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8
    tlb_flushall_shift: 6
    [ 0.010647] ACPI: Core revision 20130328
    [ 0.016690] ACPI: All ACPI Tables successfully acquired
    [ 0.020010] ftrace: allocating 18608 entries in 37 pages
    [ 0.026776] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.027225] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.061246] smpboot: CPU0: Intel(R) Pentium(R) M processor 1.86GHz (fam: 06, model: 0d, stepping: 08)
    [ 0.063333] Performance Events: p6 PMU driver.
    [ 0.063333] ... version: 0
    [ 0.063333] ... bit width: 32
    [ 0.063333] ... generic registers: 2
    [ 0.063333] ... value mask: 00000000ffffffff
    [ 0.063333] ... max period: 000000007fffffff
    [ 0.063333] ... fixed-purpose events: 0
    [ 0.063333] ... event mask: 0000000000000003
    [ 0.076681] Brought up 1 CPUs
    [ 0.076684] smpboot: Total of 1 processors activated (3725.25 BogoMIPS)
    [ 0.077871] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.078028] devtmpfs: initialized
    [ 0.078311] PM: Registering ACPI NVS region [mem 0x5f69a000-0x5f6fffff] (417792 bytes)
    [ 0.079835] RTC time: 0:17:13, date: 08/01/13
    [ 0.079897] NET: Registered protocol family 16
    [ 0.080138] ACPI: bus type PCI registered
    [ 0.080221] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.080225] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.080227] PCI: Using MMCONFIG for extended config space
    [ 0.080229] PCI: Using configuration type 1 for base access
    [ 0.081113] bio: create slab <bio-0> at 0
    [ 0.081231] ACPI: Added _OSI(Module Device)
    [ 0.081234] ACPI: Added _OSI(Processor Device)
    [ 0.081237] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.081239] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.082662] ACPI: EC: Look up EC in DSDT
    [ 0.086937] ACPI: Interpreter enabled
    [ 0.086956] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
    [ 0.086962] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
    [ 0.086980] ACPI: (supports S0 S3 S4 S5)
    [ 0.086983] ACPI: Using IOAPIC for interrupt routing
    [ 0.087016] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [ 0.087127] ACPI: No dock devices found.
    [ 0.100886] ACPI: Power Resource [CTHT] (off)
    [ 0.103939] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.104651] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    [ 0.104655] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
    [ 0.104658] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [ 0.104662] acpi PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
    [ 0.104665] acpi PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
    [ 0.104668] acpi PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
    [ 0.104672] acpi PNP0A08:00: host bridge window [mem 0x60000000-0xfebfffff] (ignored)
    [ 0.104675] PCI: root bus 00: using default resources
    [ 0.104777] PCI host bridge to bus 0000:00
    [ 0.104781] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.104785] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
    [ 0.104788] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
    [ 0.104800] pci 0000:00:00.0: [8086:2590] type 00 class 0x060000
    [ 0.104921] pci 0000:00:02.0: [8086:2592] type 00 class 0x030000
    [ 0.104933] pci 0000:00:02.0: reg 10: [mem 0xb0080000-0xb00fffff]
    [ 0.104939] pci 0000:00:02.0: reg 14: [io 0x1800-0x1807]
    [ 0.104946] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
    [ 0.104953] pci 0000:00:02.0: reg 1c: [mem 0xb0040000-0xb007ffff]
    [ 0.105035] pci 0000:00:02.1: [8086:2792] type 00 class 0x038000
    [ 0.105045] pci 0000:00:02.1: reg 10: [mem 0x00000000-0x0007ffff]
    [ 0.105212] pci 0000:00:1b.0: [8086:2668] type 00 class 0x040300
    [ 0.105235] pci 0000:00:1b.0: reg 10: [mem 0xb0000000-0xb0003fff 64bit]
    [ 0.105333] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.105390] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.105451] pci 0000:00:1c.0: [8086:2660] type 01 class 0x060400
    [ 0.105553] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.105593] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.105654] pci 0000:00:1c.2: [8086:2664] type 01 class 0x060400
    [ 0.105755] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.105803] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.105861] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
    [ 0.105915] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
    [ 0.106742] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.106797] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
    [ 0.106852] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
    [ 0.106930] pci 0000:00:1d.1: System wakeup disabled by ACPI
    [ 0.106985] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
    [ 0.107039] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
    [ 0.107119] pci 0000:00:1d.2: System wakeup disabled by ACPI
    [ 0.107171] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
    [ 0.107225] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
    [ 0.107306] pci 0000:00:1d.3: System wakeup disabled by ACPI
    [ 0.107374] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
    [ 0.107398] pci 0000:00:1d.7: reg 10: [mem 0xb0004000-0xb00043ff]
    [ 0.107497] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.107550] pci 0000:00:1d.7: System wakeup disabled by ACPI
    [ 0.107609] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [ 0.107721] pci 0000:00:1e.0: System wakeup disabled by ACPI
    [ 0.107778] pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100
    [ 0.107883] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
    [ 0.107889] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
    [ 0.107896] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 0300-030f
    [ 0.107987] pci 0000:00:1f.1: [8086:266f] type 00 class 0x01018a
    [ 0.108004] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
    [ 0.108016] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
    [ 0.108029] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
    [ 0.108041] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
    [ 0.108053] pci 0000:00:1f.1: reg 20: [io 0x1810-0x181f]
    [ 0.108175] pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
    [ 0.108246] pci 0000:00:1f.3: reg 20: [io 0x18e0-0x18ff]
    [ 0.108477] pci 0000:02:00.0: [11ab:4351] type 00 class 0x020000
    [ 0.108510] pci 0000:02:00.0: reg 10: [mem 0xb4000000-0xb4003fff 64bit]
    [ 0.108527] pci 0000:02:00.0: reg 18: [io 0x2000-0x20ff]
    [ 0.108674] pci 0000:02:00.0: supports D1 D2
    [ 0.108677] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.108734] pci 0000:02:00.0: System wakeup disabled by ACPI
    [ 0.110062] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.110076] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.110082] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.110087] pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xb7ffffff]
    [ 0.110096] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd3ffffff 64bit pref]
    [ 0.110182] pci 0000:00:1c.2: PCI bridge to [bus 04]
    [ 0.110188] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
    [ 0.110193] pci 0000:00:1c.2: bridge window [mem 0xb8000000-0xbbffffff]
    [ 0.110202] pci 0000:00:1c.2: bridge window [mem 0xd4000000-0xd7ffffff 64bit pref]
    [ 0.110279] pci 0000:06:00.0: [104c:8031] type 02 class 0x060700
    [ 0.110305] pci 0000:06:00.0: reg 10: [mem 0xfedff000-0xfedfffff]
    [ 0.110347] pci 0000:06:00.0: supports D1 D2
    [ 0.110350] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.110429] pci 0000:06:00.2: [104c:8032] type 00 class 0x0c0010
    [ 0.110455] pci 0000:06:00.2: reg 10: [mem 0xbc006000-0xbc0067ff]
    [ 0.110469] pci 0000:06:00.2: reg 14: [mem 0xbc000000-0xbc003fff]
    [ 0.110572] pci 0000:06:00.2: supports D1 D2
    [ 0.110575] pci 0000:06:00.2: PME# supported from D0 D1 D2 D3hot
    [ 0.110654] pci 0000:06:00.3: [104c:8033] type 00 class 0x018000
    [ 0.110680] pci 0000:06:00.3: reg 10: [mem 0xbc004000-0xbc005fff]
    [ 0.110790] pci 0000:06:00.3: supports D1 D2
    [ 0.110793] pci 0000:06:00.3: PME# supported from D0 D1 D2 D3hot
    [ 0.110870] pci 0000:06:00.4: [104c:8034] type 00 class 0x080500
    [ 0.110896] pci 0000:06:00.4: reg 10: [mem 0xbc007000-0xbc0070ff]
    [ 0.110911] pci 0000:06:00.4: reg 14: [mem 0xbc006c00-0xbc006cff]
    [ 0.110925] pci 0000:06:00.4: reg 18: [mem 0xbc006800-0xbc0068ff]
    [ 0.111013] pci 0000:06:00.4: supports D1 D2
    [ 0.111016] pci 0000:06:00.4: PME# supported from D0 D1 D2 D3hot
    [ 0.111098] pci 0000:06:02.0: [8086:4220] type 00 class 0x028000
    [ 0.111124] pci 0000:06:02.0: reg 10: [mem 0xbc008000-0xbc008fff]
    [ 0.111236] pci 0000:06:02.0: PME# supported from D0 D3hot D3cold
    [ 0.111354] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
    [ 0.111362] pci 0000:00:1e.0: bridge window [mem 0xbc000000-0xbc0fffff]
    [ 0.111371] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
    [ 0.111374] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
    [ 0.111379] pci 0000:06:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
    [ 0.111448] pci_bus 0000:07: busn_res: can not insert [bus 07-ff] under [bus 06] (conflicts with (null) [bus 06])
    [ 0.111455] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 0a
    [ 0.111459] pci_bus 0000:07: busn_res: can not insert [bus 07-0a] under [bus 06] (conflicts with (null) [bus 06])
    [ 0.111464] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06]
    [ 0.111487] pci_bus 0000:00: on NUMA node 0
    [ 0.111491] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.111495] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.111688] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 6 7 *10 14 15)
    [ 0.111768] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 6 7 *11 14 15)
    [ 0.111846] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 6 *7 10 14 15)
    [ 0.111924] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 6 7 *11 14 15)
    [ 0.112001] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 6 7 10 14 15) *0, disabled.
    [ 0.112082] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 6 7 11 14 15) *0, disabled.
    [ 0.112159] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 6 7 10 14 15) *0, disabled.
    [ 0.112238] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 6 7 11 14 15) *10
    [ 0.113690] ACPI: Enabled 3 GPEs in block 00 to 1F
    [ 0.113703] acpi root: \_SB_.PCI0 notify handler is installed
    [ 0.113752] Found 1 acpi root devices
    [ 0.113811] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
    [ 0.113894] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.113899] vgaarb: loaded
    [ 0.113901] vgaarb: bridge control possible 0000:00:02.0
    [ 0.113956] PCI: Using ACPI for IRQ routing
    [ 0.123744] PCI: pci_cache_line_size set to 64 bytes
    [ 0.123813] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
    [ 0.123815] e820: reserve RAM buffer [mem 0x5f690000-0x5fffffff]
    [ 0.123948] NetLabel: Initializing
    [ 0.123950] NetLabel: domain hash size = 128
    [ 0.123952] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.123968] NetLabel: unlabeled traffic allowed by default
    [ 0.124001] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.124008] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.124013] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [ 0.126058] Switching to clocksource hpet
    [ 0.130773] pnp: PnP ACPI init
    [ 0.130800] ACPI: bus type PNP registered
    [ 0.131416] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.131421] system 00:00: [mem 0xf0000000-0xf0003fff] has been reserved
    [ 0.131425] system 00:00: [mem 0xf0004000-0xf0004fff] has been reserved
    [ 0.131429] system 00:00: [mem 0xf0005000-0xf0005fff] has been reserved
    [ 0.131432] system 00:00: [mem 0xf0008000-0xf000bfff] has been reserved
    [ 0.131436] system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved
    [ 0.131442] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.131661] pnp 00:01: [dma 4]
    [ 0.131697] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.131737] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.131879] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.131929] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.132035] system 00:05: [io 0x0300-0x030f] has been reserved
    [ 0.132039] system 00:05: [io 0x0800-0x080f] has been reserved
    [ 0.132042] system 00:05: [io 0x1000-0x107f] has been reserved
    [ 0.132046] system 00:05: [io 0x1180-0x11bf] has been reserved
    [ 0.132050] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.132113] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.132390] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.133678] pnp 00:08: [dma 1]
    [ 0.133784] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
    [ 0.134099] pnp 00:09: [dma 3]
    [ 0.134174] pnp 00:09: Plug and Play ACPI device, IDs SMCf010 PNP0511 (active)
    [ 0.134235] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.134282] pnp 00:0b: Plug and Play ACPI device, IDs SYN1301 PNP0f13 (active)
    [ 0.134310] pnp: PnP ACPI: found 12 devices
    [ 0.134312] ACPI: bus type PNP unregistered
    [ 0.171975] pci 0000:06:00.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    [ 0.171980] pci 0000:06:00.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    [ 0.171985] pci 0000:00:1e.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
    [ 0.171989] pci 0000:06:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
    [ 0.171994] pci 0000:00:1e.0: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 06] add_size 4000000
    [ 0.172003] pci 0000:00:1e.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
    [ 0.172007] pci 0000:00:1e.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.172014] pci 0000:00:1e.0: BAR 15: assigned [mem 0x60000000-0x63ffffff pref]
    [ 0.172018] pci 0000:00:02.1: BAR 0: assigned [mem 0x64000000-0x6407ffff]
    [ 0.172025] pci 0000:00:1e.0: BAR 13: assigned [io 0x4000-0x4fff]
    [ 0.172029] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.172033] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.172040] pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xb7ffffff]
    [ 0.172046] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd3ffffff 64bit pref]
    [ 0.172055] pci 0000:00:1c.2: PCI bridge to [bus 04]
    [ 0.172059] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
    [ 0.172066] pci 0000:00:1c.2: bridge window [mem 0xb8000000-0xbbffffff]
    [ 0.172072] pci 0000:00:1c.2: bridge window [mem 0xd4000000-0xd7ffffff 64bit pref]
    [ 0.172083] pci 0000:06:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
    [ 0.172087] pci 0000:06:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
    [ 0.172090] pci 0000:06:00.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    [ 0.172093] pci 0000:06:00.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    [ 0.172097] pci 0000:06:00.0: BAR 15: assigned [mem 0x60000000-0x63ffffff pref]
    [ 0.172102] pci 0000:06:00.0: BAR 16: assigned [mem 0x68000000-0x6bffffff]
    [ 0.172105] pci 0000:06:00.0: BAR 13: assigned [io 0x4000-0x40ff]
    [ 0.172108] pci 0000:06:00.0: BAR 14: assigned [io 0x4400-0x44ff]
    [ 0.172112] pci 0000:06:00.0: CardBus bridge to [bus 07-0a]
    [ 0.172115] pci 0000:06:00.0: bridge window [io 0x4000-0x40ff]
    [ 0.172122] pci 0000:06:00.0: bridge window [io 0x4400-0x44ff]
    [ 0.172128] pci 0000:06:00.0: bridge window [mem 0x60000000-0x63ffffff pref]
    [ 0.172135] pci 0000:06:00.0: bridge window [mem 0x68000000-0x6bffffff]
    [ 0.172141] pci 0000:00:1e.0: PCI bridge to [bus 06]
    [ 0.172145] pci 0000:00:1e.0: bridge window [io 0x4000-0x4fff]
    [ 0.172152] pci 0000:00:1e.0: bridge window [mem 0xbc000000-0xbc0fffff]
    [ 0.172158] pci 0000:00:1e.0: bridge window [mem 0x60000000-0x63ffffff pref]
    [ 0.172482] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.172565] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
    [ 0.172568] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
    [ 0.172571] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.172575] pci_bus 0000:02: resource 1 [mem 0xb4000000-0xb7ffffff]
    [ 0.172578] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd3ffffff 64bit pref]
    [ 0.172581] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
    [ 0.172585] pci_bus 0000:04: resource 1 [mem 0xb8000000-0xbbffffff]
    [ 0.172588] pci_bus 0000:04: resource 2 [mem 0xd4000000-0xd7ffffff 64bit pref]
    [ 0.172591] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff]
    [ 0.172594] pci_bus 0000:06: resource 1 [mem 0xbc000000-0xbc0fffff]
    [ 0.172598] pci_bus 0000:06: resource 2 [mem 0x60000000-0x63ffffff pref]
    [ 0.172601] pci_bus 0000:06: resource 4 [io 0x0000-0xffff]
    [ 0.172604] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff]
    [ 0.172607] pci_bus 0000:07: resource 0 [io 0x4000-0x40ff]
    [ 0.172610] pci_bus 0000:07: resource 1 [io 0x4400-0x44ff]
    [ 0.172613] pci_bus 0000:07: resource 2 [mem 0x60000000-0x63ffffff pref]
    [ 0.172617] pci_bus 0000:07: resource 3 [mem 0x68000000-0x6bffffff]
    [ 0.172672] NET: Registered protocol family 2
    [ 0.172896] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.172951] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.173002] TCP: Hash tables configured (established 8192 bind 8192)
    [ 0.173041] TCP: reno registered
    [ 0.173044] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.173060] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.173150] NET: Registered protocol family 1
    [ 0.173167] pci 0000:00:02.0: Boot video device
    [ 0.174673] PCI: CLS 32 bytes, default 64
    [ 0.174731] Unpacking initramfs...
    [ 0.263828] Freeing initrd memory: 3004k freed
    [ 0.266187] Simple Boot Flag at 0x39 set to 0x1
    [ 0.266287] apm: BIOS not found.
    [ 0.266346] Scanning for low memory corruption every 60 seconds
    [ 0.266796] audit: initializing netlink socket (disabled)
    [ 0.266816] type=2000 audit(1375316232.266:1): initialized
    [ 0.281831] bounce pool size: 64 pages
    [ 0.281845] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.284147] VFS: Disk quotas dquot_6.5.2
    [ 0.284226] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.284495] msgmni has been set to 1728
    [ 0.284769] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.284804] io scheduler noop registered
    [ 0.284806] io scheduler deadline registered
    [ 0.284852] io scheduler cfq registered (default)
    [ 0.284987] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [ 0.285087] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
    [ 0.285270] vesafb: mode is 1024x768x32, linelength=4096, pages=0
    [ 0.285273] vesafb: scrolling: redraw
    [ 0.285276] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.285482] vesafb: framebuffer at 0xc0000000, mapped to 0xf8080000, using 3072k, total 3072k
    [ 0.315579] Console: switching to colour frame buffer device 128x48
    [ 0.345515] fb0: VESA VGA frame buffer device
    [ 0.345558] intel_idle: does not run on family 6 model 13
    [ 0.345597] GHES: HEST is not enabled!
    [ 0.345617] isapnp: Scanning for PnP cards...
    [ 0.658543] isapnp: No Plug & Play device found
    [ 0.658601] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.679337] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.680017] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 0.684556] i8042: Detected active multiplexing controller, rev 1.1
    [ 0.686055] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.686096] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 0.686128] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 0.686159] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 0.686194] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 0.686311] mousedev: PS/2 mouse device common for all mice
    [ 0.686409] rtc_cmos 00:06: RTC can wake from S4
    [ 0.686571] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [ 0.686605] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.686637] cpuidle: using governor ladder
    [ 0.686639] cpuidle: using governor menu
    [ 0.686687] drop_monitor: Initializing network drop monitor service
    [ 0.686801] TCP: cubic registered
    [ 0.686956] NET: Registered protocol family 10
    [ 0.687187] NET: Registered protocol family 17
    [ 0.687199] Key type dns_resolver registered
    [ 0.687333] Using IPI No-Shortcut mode
    [ 0.687439] PM: Hibernation image not present or could not be loaded.
    [ 0.687450] registered taskstats version 1
    [ 0.687968] Magic number: 9:800:252
    [ 0.687999] pci 0000:00:1d.0: hash matches
    [ 0.688056] rtc_cmos 00:06: setting system clock to 2013-08-01 00:17:13 UTC (1375316233)
    [ 0.688187] Freeing unused kernel memory: 596k freed
    [ 0.688527] Write protecting the kernel text: 4156k
    [ 0.688561] Write protecting the kernel read-only data: 1316k
    [ 0.693760] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.699029] systemd-udevd[38]: starting version 204
    [ 0.749237] ACPI: bus type USB registered
    [ 0.749277] usbcore: registered new interface driver usbfs
    [ 0.749292] usbcore: registered new interface driver hub
    [ 0.753176] usbcore: registered new device driver usb
    [ 0.753809] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.753997] ehci-pci: EHCI PCI platform driver
    [ 0.754224] ehci-pci 0000:00:1d.7: setting latency timer to 64
    [ 0.754238] ehci-pci 0000:00:1d.7: EHCI Host Controller
    [ 0.754248] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
    [ 0.754268] ehci-pci 0000:00:1d.7: debug port 1
    [ 0.757154] uhci_hcd: USB Universal Host Controller Interface driver
    [ 0.761830] sdhci: Secure Digital Host Controller Interface driver
    [ 0.761835] sdhci: Copyright(c) Pierre Ossman
    [ 0.762138] sdhci-pci 0000:06:00.4: SDHCI controller found [104c:8034] (rev 0)
    [ 0.762387] mmc0: SDHCI controller on PCI [0000:06:00.4] using PIO
    [ 0.763154] mmc1: SDHCI controller on PCI [0000:06:00.4] using PIO
    [ 0.763242] mmc2: SDHCI controller on PCI [0000:06:00.4] using PIO
    [ 0.767069] SCSI subsystem initialized
    [ 0.769405] ACPI: bus type ATA registered
    [ 0.769889] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
    [ 0.769918] ehci-pci 0000:00:1d.7: irq 23, io mem 0xb0004000
    [ 0.776689] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 0.776917] hub 1-0:1.0: USB hub found
    [ 0.776924] hub 1-0:1.0: 8 ports detected
    [ 0.777495] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 0.777500] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 0.777510] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 0.777540] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
    [ 0.777717] hub 2-0:1.0: USB hub found
    [ 0.777722] hub 2-0:1.0: 2 ports detected
    [ 0.777972] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 0.777976] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 0.777984] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    [ 0.778025] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
    [ 0.778188] hub 3-0:1.0: USB hub found
    [ 0.778193] hub 3-0:1.0: 2 ports detected
    [ 0.778441] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 0.778446] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 0.778453] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    [ 0.778492] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
    [ 0.778666] hub 4-0:1.0: USB hub found
    [ 0.778671] hub 4-0:1.0: 2 ports detected
    [ 0.778926] uhci_hcd 0000:00:1d.3: setting latency timer to 64
    [ 0.778930] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [ 0.778938] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    [ 0.778966] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
    [ 0.779135] hub 5-0:1.0: USB hub found
    [ 0.779140] hub 5-0:1.0: 2 ports detected
    [ 0.779655] libata version 3.00 loaded.
    [ 0.780086] ata_piix 0000:00:1f.1: version 2.13
    [ 0.780279] ata_piix 0000:00:1f.1: setting latency timer to 64
    [ 0.783440] scsi0 : ata_piix
    [ 0.786084] scsi1 : ata_piix
    [ 0.786168] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
    [ 0.786171] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
    [ 0.786694] tifm_core: MMC/SD card detected in socket 0:3
    [ 0.786781] ata2: port disabled--ignoring
    [ 0.823446] firewire_ohci 0000:06:00.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
    [ 0.950540] ata1.00: ATA-7: FUJITSU MHV2080AT PL, 000000A0, max UDMA/100
    [ 0.950544] ata1.00: 156301488 sectors, multi 16: LBA
    [ 0.950557] ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-4082N, HH02, max UDMA/33
    [ 0.963752] ata1.00: configured for UDMA/100
    [ 0.976914] ata1.01: configured for UDMA/33
    [ 0.979353] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2080A 0000 PQ: 0 ANSI: 5
    [ 0.982892] scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4082N HH02 PQ: 0 ANSI: 5
    [ 0.986322] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
    [ 0.986396] sd 0:0:0:0: [sda] Write Protect is off
    [ 0.986400] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 0.986430] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.080286] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.080290] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.080606] sr 0:0:1:0: Attached scsi CD-ROM sr0
    [ 1.108366] sda: sda1 < sda5 > sda2 sda3 sda4
    [ 1.109847] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.190025] usb 1-5: new high-speed USB device number 4 using ehci-pci
    [ 1.266683] tsc: Refined TSC clocksource calibration: 1861.999 MHz
    [ 1.266690] Switching to clocksource tsc
    [ 1.317249] usb-storage 1-5:1.0: USB Mass Storage device detected
    [ 1.317314] scsi2 : usb-storage 1-5:1.0
    [ 1.317597] usbcore: registered new interface driver usb-storage
    [ 1.323429] firewire_core 0000:06:00.2: created device fw0: GUID 6600774200e09104, S400
    [ 1.420016] usb 1-6: new high-speed USB device number 5 using ehci-pci
    [ 1.546136] usb-storage 1-6:1.0: USB Mass Storage device detected
    [ 1.546307] scsi3 : usb-storage 1-6:1.0
    [ 1.770014] usb 2-1: new low-speed USB device number 2 using uhci_hcd
    [ 1.949297] hidraw: raw HID events driver (C) Jiri Kosina
    [ 1.961728] usbcore: registered new interface driver usbhid
    [ 1.961731] usbhid: USB HID core driver
    [ 2.148459] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.173364] usb 2-2: new low-speed USB device number 3 using uhci_hcd
    [ 2.320861] scsi 2:0:0:0: CD-ROM SONY DVD RW DRU-190A 1.62 PQ: 0 ANSI: 0
    [ 2.323718] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.323862] sr 2:0:0:0: Attached scsi CD-ROM sr1
    [ 2.547488] scsi 3:0:0:0: Direct-Access JetFlash Transcend 8GB 8.07 PQ: 0 ANSI: 2
    [ 2.548846] sd 3:0:0:0: [sdb] 15687680 512-byte logical blocks: (8.03 GB/7.48 GiB)
    [ 2.549467] sd 3:0:0:0: [sdb] Write Protect is off
    [ 2.549470] sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
    [ 2.550095] sd 3:0:0:0: [sdb] No Caching mode page present
    [ 2.550415] sd 3:0:0:0: [sdb] Assuming drive cache: write through
    [ 2.554343] sd 3:0:0:0: [sdb] No Caching mode page present
    [ 2.554659] sd 3:0:0:0: [sdb] Assuming drive cache: write through
    [ 2.727731] sdb: sdb1
    [ 2.729968] sd 3:0:0:0: [sdb] No Caching mode page present
    [ 2.730299] sd 3:0:0:0: [sdb] Assuming drive cache: write through
    [ 2.731468] sd 3:0:0:0: [sdb] Attached SCSI removable disk
    [ 3.120230] systemd[1]: systemd 204 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 3.159302] systemd[1]: Set hostname to <ighost>.
    [ 3.828104] systemd[1]: Cannot add dependency job for unit acpid.service, ignoring: Unit acpid.service failed to load: No such file or directory. See system logs and 'systemctl status acpid.service' for details.
    [ 3.828451] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 3.828515] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 3.828533] systemd[1]: Starting Remote File Systems.
    [ 3.828551] systemd[1]: Reached target Remote File Systems.
    [ 3.828567] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 3.828615] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 3.828630] systemd[1]: Starting Delayed Shutdown Socket.
    [ 3.828661] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 3.828675] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 3.828705] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 3.828719] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 3.828753] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 3.828772] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 3.828816] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 3.828830] systemd[1]: Starting Paths.
    [ 3.828845] systemd[1]: Reached target Paths.
    [ 3.828861] systemd[1]: Starting Journal Socket.
    [ 3.828922] systemd[1]: Listening on Journal Socket.
    [ 3.828942] systemd[1]: Starting Setup Virtual Console...
    [ 3.829541] systemd[1]: Starting Create static device nodes in /dev...
    [ 3.859627] systemd[1]: Starting Apply Kernel Variables...
    [ 3.860503] systemd[1]: Mounting Huge Pages File System...
    [ 3.860890] systemd[1]: Starting Journal Service...
    [ 3.861380] systemd[1]: Started Journal Service.
    [ 3.861499] systemd[1]: Starting udev Kernel Socket.
    [ 3.861542] systemd[1]: Listening on udev Kernel Socket.
    [ 3.861615] systemd[1]: Starting udev Control Socket.
    [ 3.861652] systemd[1]: Listening on udev Control Socket.
    [ 3.861722] systemd[1]: Starting udev Coldplug all Devices...
    [ 3.862166] systemd[1]: Mounting Debug File System...
    [ 3.862572] systemd[1]: Mounting POSIX Message Queue File System...
    [ 3.862944] systemd[1]: Starting Encrypted Volumes.
    [ 3.862964] systemd[1]: Reached target Encrypted Volumes.
    [ 3.863003] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 3.863164] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 3.879599] systemd[1]: Started Set Up Additional Binary Formats.
    [ 3.914088] systemd[1]: Starting Load Kernel Modules...
    [ 3.914616] systemd[1]: Expecting device dev-disk-by\x2duuid-9fa4ccc9\x2d879c\x2d42b0\x2d8c42\x2d39ff67b9bf38.device...
    [ 3.914650] systemd[1]: Started File System Check on Root Device.
    [ 3.914670] systemd[1]: Mounting Temporary Directory...
    [ 3.930156] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 3.930608] systemd[1]: Expecting device dev-disk-by\x2duuid-BAA022C6A0228949.device...
    [ 3.930627] systemd[1]: Expecting device dev-disk-by\x2duuid-42143f2b\x2d29c6\x2d4174\x2dab7b\x2dfb1600c601e6.device...
    [ 5.034037] FS-Cache: Loaded
    [ 5.056025] RPC: Registered named UNIX socket transport module.
    [ 5.056030] RPC: Registered udp transport module.
    [ 5.056032] RPC: Registered tcp transport module.
    [ 5.056034] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 5.158185] EXT4-fs (sda5): re-mounted. Opts: data=ordered
    [ 5.291383] systemd-udevd[105]: starting version 204
    [ 5.355353] FS-Cache: Netfs 'nfs' registered for caching
    [ 6.472733] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 6.472878] ACPI: Lid Switch [LID0]
    [ 6.474425] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
    [ 6.474491] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2
    [ 6.475351] ACPI: Requesting acpi_cpufreq
    [ 6.475712] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
    [ 6.475718] ACPI: Power Button [PWRB]
    [ 6.475794] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
    [ 6.475798] ACPI: Sleep Button [SLPB]
    [ 6.477173] ACPI: AC Adapter [AC] (on-line)
    [ 6.524341] tsc: Marking TSC unstable due to TSC halts in idle
    [ 6.525067] ACPI: acpi_idle registered with cpuidle
    [ 6.525459] ACPI: Battery Slot [CMB0] (battery absent)
    [ 6.525775] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [ 6.525782] ACPI: Power Button [PWRF]
    [ 6.529302] Switching to clocksource hpet
    [ 6.623493] wmi: Mapper loaded
    [ 6.706893] NET: Registered protocol family 23
    [ 6.749372] found SMC SuperIO Chip (devid=0x7a rev=01 base=0x004e): LPC47N227
    [ 6.749400] smsc_superio_flat(): fir: 0x6f8, sir: 0x2f8, dma: 03, irq: 3, mode: 0x0e
    [ 6.749418] smsc_ircc_present(), addr 0x06f8 - no device found!
    [ 6.752284] parport_pc 00:08: reported by Plug and Play ACPI
    [ 6.752364] parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE]
    [ 6.759649] thermal LNXTHERM:00: registered as thermal_zone0
    [ 6.759653] ACPI: Thermal Zone [TZ1] (40 C)
    [ 6.761691] thermal LNXTHERM:01: registered as thermal_zone1
    [ 6.761694] ACPI: Thermal Zone [TZ2] (55 C)
    [ 6.775603] ACPI: Fan [FAN0] (off)
    [ 6.868349] sky2: driver version 1.30
    [ 6.868486] sky2 0000:02:00.0: Yukon-2 FE chip revision 1
    [ 6.868560] sky2 0000:02:00.0: irq 42 for MSI/MSI-X
    [ 6.868879] sky2 0000:02:00.0 eth0: addr 00:e0:91:0f:4a:19
    [ 6.886311] intel_rng: FWH not detected
    [ 7.052962] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251)
    [ 7.052973] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 7.052978] ACPI Warning: 0x000011b0-0x000011bf SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
    [ 7.052983] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 7.052985] ACPI Warning: 0x00001180-0x000011af SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
    [ 7.052990] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 7.052992] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 7.106512] Linux agpgart interface v0.103
    [ 7.142882] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
    [ 7.143028] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
    [ 7.144655] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
    [ 7.144970] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
    [ 7.217080] yenta_cardbus 0000:06:00.0: CardBus bridge found [1854:0028]
    [ 7.217106] yenta_cardbus 0000:06:00.0: Using INTVAL to route CSC interrupts to PCI
    [ 7.217109] yenta_cardbus 0000:06:00.0: Routing CardBus interrupts to PCI
    [ 7.217116] yenta_cardbus 0000:06:00.0: TI: mfunc 0x01d01002, devctl 0x64
    [ 7.228515] [drm] Initialized drm 1.1.0 20060810
    [ 7.266001] cfg80211: Calling CRDA to update world regulatory domain
    [ 7.297286] lib80211: common routines for IEEE802.11 drivers
    [ 7.297292] lib80211_crypt: registered algorithm 'NULL'
    [ 7.301107] [drm] Memory usable by graphics device = 256M
    [ 7.301113] checking generic (c0000000 300000) vs hw (c0000000 10000000)
    [ 7.301116] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [ 7.301141] Console: switching to colour dummy device 80x25
    [ 7.301257] i915 0000:00:02.0: setting latency timer to 64
    [ 7.302295] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 7.302300] [drm] Driver supports precise vblank timestamp query.
    [ 7.302376] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 7.316734] libipw: 802.11 data/management/control stack, git-1.1.13
    [ 7.316737] libipw: Copyright (C) 2004-2005 Intel Corporation <[email protected]>
    [ 7.323825] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
    [ 7.323828] ipw2200: Copyright(c) 2003-2006 Intel Corporation
    [ 7.434003] [drm] initialized overlay support
    [ 7.447402] yenta_cardbus 0000:06:00.0: ISA IRQ mask 0x0cd8, PCI irq 16
    [ 7.447408] yenta_cardbus 0000:06:00.0: Socket status: 30000006
    [ 7.447414] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #06 to #0a
    [ 7.447425] yenta_cardbus 0000:06:00.0: pcmcia: parent PCI bridge window: [io 0x4000-0x4fff]
    [ 7.447429] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x4fff:
    [ 7.448715] excluding 0x4000-0x40ff 0x4400-0x44ff
    [ 7.454021] yenta_cardbus 0000:06:00.0: pcmcia: parent PCI bridge window: [mem 0xbc000000-0xbc0fffff]
    [ 7.454026] pcmcia_socket pcmcia_socket0: cs: memory probe 0xbc000000-0xbc0fffff:
    [ 7.454030] excluding 0xbc000000-0xbc00ffff
    [ 7.454045] yenta_cardbus 0000:06:00.0: pcmcia: parent PCI bridge window: [mem 0x60000000-0x63ffffff pref]
    [ 7.454049] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x63ffffff:
    [ 7.454061] excluding 0x60000000-0x63ffffff
    [ 7.457625] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
    [ 7.726030] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input6
    [ 7.727184] input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input7
    [ 7.730133] hid-generic 0003:0518:0001.0002: input,hidraw0: USB HID v1.10 Keyboard [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1d.0-2/input0
    [ 7.730188] a4tech 0003:09DA:000A.0001: input,hidraw1: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1d.0-1/input0
    [ 7.732273] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input8
    [ 7.732416] hid-generic 0003:0518:0001.0003: input,hidraw2: USB HID v1.10 Mouse [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1d.0-2/input1
    [ 7.797551] ipw2200: Radio Frequency Kill Switch is On:
    Kill switch must be turned off for wireless networking to work.
    [ 7.800799] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
    [ 7.893088] input: PC Speaker as /devices/platform/pcspkr/input/input9
    [ 7.991976] tc1100_wmi: HP Compaq TC1100 Tablet WMI Extras loaded
    [ 8.038907] fbcon: inteldrmfb (fb0) is primary device
    [ 8.048603] ppdev: user-space parallel port driver
    [ 8.059482] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
    [ 8.059630] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 8.083387] Console: switching to colour frame buffer device 128x48
    [ 8.089032] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 8.089037] i915 0000:00:02.0: registered panic notifier
    [ 8.089048] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 8.089555] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
    [ 8.110287] systemd-udevd[128]: renamed network interface eth0 to enp2s0
    [ 8.123115] iTCO_vendor_support: vendor-support=0
    [ 8.199308] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
    [ 8.200763] excluding 0x170-0x177 0x1f0-0x1f7 0x300-0x30f 0x370-0x37f
    [ 8.201559] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
    [ 8.201948] excluding 0x3f0-0x3ff 0x4d0-0x4d7
    [ 8.202341] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
    [ 8.202952] clean.
    [ 8.203000] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
    [ 8.204946] clean.
    [ 8.205013] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
    [ 8.205024] excluding 0xc0000-0xc7fff 0xdc000-0xfffff
    [ 8.205096] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
    [ 8.205128] clean.
    [ 8.205177] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
    [ 8.205200] excluding 0x60000000-0x60ffffff
    [ 8.205252] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
    [ 8.205948] clean.
    [ 8.260695] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 8.260987] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 8.261238] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
    [ 8.261465] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
    [ 8.261705] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
    [ 8.261931] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
    [ 8.263318] ACPI Warning: 0x000018e0-0x000018ff SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130328/utaddress-251)
    [ 8.263328] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 8.264893] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 8.264941] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
    [ 8.268408] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 8.283555] systemd-udevd[123]: renamed network interface eth1 to wlp6s2
    [ 8.508098] psmouse serio2: synaptics: Touchpad model: 1, fw: 5.9, id: 0x23aeb3, caps: 0xa04713/0x10008/0x0, board id: 3655, fw id: 28762
    [ 8.543316] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input16
    [ 9.444744] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    [ 9.746168] fuse init (API version 7.22)
    [ 9.795856] Adding 2096476k swap on /dev/sda4. Priority:-1 extents:1 across:2096476k FS
    [ 10.804356] sky2 0000:02:00.0 enp2s0: enabling interface
    [ 10.804455] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
    [ 12.524356] sky2 0000:02:00.0 enp2s0: Link is up at 100 Mbps, full duplex, flow control rx
    [ 12.524399] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
    [ 15.965900] systemd-logind[185]: Watching system buttons on /dev/input/event5 (Power Button)
    [ 15.966015] systemd-logind[185]: Watching system buttons on /dev/input/event2 (Video Bus)
    [ 15.966122] systemd-logind[185]: Watching system buttons on /dev/input/event3 (Power Button)
    [ 15.966231] systemd-logind[185]: Watching system buttons on /dev/input/event1 (Lid Switch)
    [ 15.966337] systemd-logind[185]: Watching system buttons on /dev/input/event4 (Sleep Button)
    [ 29.280330] systemd[1]: Unit [email protected] entered failed state.
    [ 29.380404] systemd[1]: [email protected] holdoff time over, scheduling restart.
    [ 29.383839] systemd[1]: Unit [email protected] entered failed state.
    [ 283.968752] sky2 0000:02:00.0 enp2s0: Link is down
    [ 288.653377] sky2 0000:02:00.0 enp2s0: Link is up at 100 Mbps, full duplex, flow control rx
    [ 301.725348] sky2 0000:02:00.0 enp2s0: Link is down
    [ 303.401808] sky2 0000:02:00.0 enp2s0: Link is up at 100 Mbps, full duplex, flow control rx
    [ 978.946847] usb 1-5: USB disconnect, device number 4
    [ 978.952420] cdrom: issuing MRW background format suspend
    [36653.884288] hda-intel 0000:00:1b.0: spurious response 0x0:0x0, last cmd=0xb70740
    [36653.884298] hda-intel 0000:00:1b.0: spurious response 0x0:0x0, last cmd=0xb70740
    [36653.884304] hda-intel 0000:00:1b.0: spurious response 0x0:0x0, last cmd=0xb70740
    [36653.884310] hda-intel 0000:00:1b.0: spurious response 0x0:0x0, last cmd=0xb70740
    [36653.983274] hda-intel 0000:00:1b.0: spurious response 0x0:0x0, last cmd=0xb70740
    [36653.983488] hda-intel 0000:00:1b.0: spurious response 0x0:0x0, last cmd=0xb70740
    [40311.593171] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [40311.595838] sr 0:0:1:0: Attached scsi generic sg1 type 5
    [40311.596002] sd 3:0:0:0: Attached scsi generic sg2 type 0
    [43081.692487] EXT4-fs (sda5): re-mounted. Opts: data=ordered,commit=0
    [43081.983029] EXT4-fs (sda2): re-mounted. Opts: commit=0
    [43083.232434] ipw2200: Failed to send POWER_MODE: Command timed out.

    cfr wrote:
    Welcome to the forums.
    Have you tried uninstalling xf86-input-keyboard? If you want evdev to handle it, that is.
    Does the keyboard work when you decrypt the encryption device (or maybe you use a keyfile)?
    Does it work if you boot to the command line?
    Is the keyboard hook included in the initramfs? (Though I don't think this should matter for later.)
    first place, tnx for the answer and sorry cause it took too long for me to answer back.
    I uninstalled xf86-input-keyboard. now i get an error at boot time but it passes to arch so no big deal.
    About encryption device I have no idea cause i never chose to encrypt anything.
    About working at command line, answer is no. It is not working in my bash and also at tty1.
    about keyboard hook, Answer is yes, it is included.
    I'm really enjoying my systems speed with arch but this problem is really killing me. Now i'm using my laptop like a PC no movement allowed cause I must take a keyboard with me.
    and really, an active forum and just one answer to my question!

  • [Lenovo IdeaPad S10-3t] Waking up from suspend not working properly

    Hi,
    I'm having some issues with getting suspend to work on my S10-3t. I tried pm-utils and the s2ram script (with about any combination of options as my machine is not on the whitelist) and always get the same behaviour: Suspending seems to succeed but waking up takes about 5 minutes.
    I tried using pm-suspend under ubuntu 10.10, works flawlessly out of the box, so it *can* be done.. somehow.
    Apparently this was a kernel related issue in older versions of ubuntu too, I couldn't quite figure out how they fixed it though (https://bugs.launchpad.net/ubuntu/+sour … bug/598664).
    I tailed the pm-suspend.log and kernel.log through one suspend/wake up cycle, here's the output:
    pm-suspend.log:
    bash-4.1$ date;sudo tail -f /var/log/pm-suspend.log
    Sun Oct 24 20:27:47 CEST 2010
    Password:
    Running hook /usr/lib/pm-utils/sleep.d/01grub resume suspend:
    /usr/lib/pm-utils/sleep.d/01grub resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:
    /usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:
    /usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
    Sun Oct 24 20:25:36 CEST 2010: Finished.
    tail: /var/log/pm-suspend.log: file truncated
    Initial commandline parameters:
    Sun Oct 24 20:29:08 CEST 2010: Running hooks for suspend.
    Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
    Linux netarch.haselwarter.org 2.6.35-ARCH #1 SMP PREEMPT Wed Sep 29 07:17:20 UTC 2010 i686 Intel(R) Atom(TM) CPU N470 @ 1.83GHz GenuineIntel GNU/Linux
    Module Size Used by
    cpufreq_ondemand 6971 2
    btusb 9745 0
    hid_cando 2611 0
    bluetooth 44753 1 btusb
    rfkill 12854 1 bluetooth
    usbhid 33564 0
    hid 60400 2 hid_cando,usbhid
    uvcvideo 53488 0
    videodev 39124 1 uvcvideo
    v4l1_compat 13562 2 uvcvideo,videodev
    joydev 7503 0
    snd_seq_dummy 1079 0
    snd_seq_oss 25072 0
    snd_seq_midi_event 4496 1 snd_seq_oss
    snd_seq 41752 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
    snd_seq_device 4369 3 snd_seq_dummy,snd_seq_oss,snd_seq
    snd_hda_codec_conexant 26292 1
    snd_pcm_oss 33662 0
    i915 267072 2
    snd_mixer_oss 14686 1 snd_pcm_oss
    snd_hda_intel 19020 0
    snd_hda_codec 67274 2 snd_hda_codec_conexant,snd_hda_intel
    drm_kms_helper 22043 1 i915
    drm 134132 3 i915,drm_kms_helper
    snd_hwdep 4764 1 snd_hda_codec
    snd_pcm 58308 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
    lib80211_crypt_tkip 7521 0
    uhci_hcd 19251 0
    snd_timer 15423 2 snd_seq,snd_pcm
    broadcom 5201 0
    i2c_algo_bit 4407 1 i915
    ehci_hcd 32860 0
    snd 43283 11 snd_seq_oss,snd_seq,snd_seq_device,snd_hda_codec_conexant,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
    soundcore 5025 1 snd
    video 15889 1 i915
    wl 1943997 0
    tg3 115656 0
    usbcore 121737 6 btusb,usbhid,uvcvideo,uhci_hcd,ehci_hcd
    output 1448 1 video
    snd_page_alloc 5981 2 snd_hda_intel,snd_pcm
    intel_agp 24510 2 i915
    wmi 5962 0
    battery 7879 0
    i2c_i801 7426 0
    ac 2329 0
    i2c_core 15599 6 videodev,i915,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
    psmouse 51529 0
    evdev 6820 9
    libphy 14543 2 broadcom,tg3
    lib80211 3158 2 lib80211_crypt_tkip,wl
    agpgart 23520 2 drm,intel_agp
    sg 20932 0
    thermal 9786 0
    coretemp 4665 0
    button 3746 1 i915
    serio_raw 3566 0
    acpi_cpufreq 5157 1
    freq_table 1999 2 cpufreq_ondemand,acpi_cpufreq
    processor 25126 3 acpi_cpufreq
    mperf 979 1 acpi_cpufreq
    rtc_cmos 7746 0
    rtc_core 11831 1 rtc_cmos
    rtc_lib 1494 1 rtc_core
    ext4 282610 1
    mbcache 4290 1 ext4
    jbd2 58396 1 ext4
    crc16 1053 1 ext4
    sd_mod 26768 3
    ahci 17813 0
    libahci 16174 3 ahci
    libata 140771 2 ahci,libahci
    scsi_mod 105888 3 sg,sd_mod,libata
    total used free shared buffers cached
    Mem: 2053592 233156 1820436 0 24724 102332
    -/+ buffers/cache: 106100 1947492
    Swap: 1952764 0 1952764
    /usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
    /usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
    /usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/01laptop-mode suspend suspend:
    /usr/lib/pm-utils/sleep.d/01laptop-mode suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend:
    /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
    /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend:
    Having NetworkManager put all interaces to sleep...Done.
    /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
    /usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
    /usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/91wicd suspend suspend:
    Unable to connect to wicd daemon - is it running?
    /usr/lib/pm-utils/sleep.d/91wicd suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
    /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
    /usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
    Kernel modesetting video driver detected, not using quirks.
    /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
    /usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
    Sun Oct 24 20:29:10 CEST 2010: performing suspend
    Switching from vt7 to vt1
    fbcon fb0 state 1
    fbcon fb0 state 0
    switching back to vt7
    Sun Oct 24 20:34:40 CEST 2010: Awake.
    Sun Oct 24 20:34:40 CEST 2010: Running hooks for resume
    Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend:
    /usr/lib/pm-utils/sleep.d/99video resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:
    /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend:
    /usr/lib/pm-utils/sleep.d/95led resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:
    /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/91wicd resume suspend:
    Unable to connect to wicd daemon - is it running?
    /usr/lib/pm-utils/sleep.d/91wicd resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend:
    /usr/lib/pm-utils/sleep.d/90clock resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend:
    Reloaded unloaded modules.
    /usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend:
    Having NetworkManager wake interfaces back up...Done.
    /usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend:
    /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/11netcfg resume suspend:
    /usr/lib/pm-utils/sleep.d/11netcfg resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/01laptop-mode resume suspend:
    tail: /var/log/pm-suspend.log: file truncated
    Laptop mode
    tail: /var/log/pm-suspend.log: file truncated
    enabled, not active
    Error for wireless request "Set Power Management" (8B2C) :
    SET failed on device eth0 ; Operation not supported.
    tail: /var/log/pm-suspend.log: file truncated
    Failed.
    /usr/lib/pm-utils/sleep.d/01laptop-mode resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/01grub resume suspend:
    /usr/lib/pm-utils/sleep.d/01grub resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:
    /usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:
    /usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
    Sun Oct 24 20:34:44 CEST 2010: Finished.
    kernel.log:
    bash-4.1$ sudo tail -f /var/log/kernel.log
    Password:
    Oct 24 20:27:15 netarch kernel: input: Cando Corporation Cando 10.1 Multi Touch Panel with Controller as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input9
    Oct 24 20:27:15 netarch kernel: cando-touch 0003:2087:0A01.0001: input,hidraw0: USB HID v1.11 Device [Cando Corporation Cando 10.1 Multi Touch Panel with Controller] on usb-0000:00:1d.1-1/input0
    Oct 24 20:27:15 netarch kernel: EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
    Oct 24 20:27:15 netarch kernel: EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
    Oct 24 20:27:15 netarch kernel: Adding 1952764k swap on /dev/sda2. Priority:-1 extents:1 across:1952764k
    Oct 24 20:27:16 netarch kernel: tg3 0000:05:00.0: irq 45 for MSI/MSI-X
    Oct 24 20:27:16 netarch kernel: tg3 0000:05:00.0: eth0: Link is down
    Oct 24 20:27:17 netarch kernel: CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
    Oct 24 20:27:18 netarch kernel: tg3 0000:05:00.0: eth0: Link is down
    Oct 24 20:27:19 netarch kernel: WARNING! power/level is deprecated; use power/control instead
    Oct 24 20:29:08 netarch kernel: CE: hpet increased min_delta_ns to 7500 nsec
    Oct 24 20:29:08 netarch kernel: ata1.00: configured for UDMA/100
    Oct 24 20:29:08 netarch kernel: ata1: EH complete
    Oct 24 20:29:08 netarch kernel: EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
    Oct 24 20:34:40 netarch kernel: PM: Syncing filesystems ... done.
    Oct 24 20:34:40 netarch kernel: PM: Preparing system for mem sleep
    Oct 24 20:34:40 netarch kernel: Freezing user space processes ... (elapsed 0.01 seconds) done.
    Oct 24 20:34:40 netarch kernel: Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
    Oct 24 20:34:40 netarch kernel: PM: Entering mem sleep
    Oct 24 20:34:40 netarch kernel: Suspending console(s) (use no_console_suspend to debug)
    Oct 24 20:34:40 netarch kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
    Oct 24 20:34:40 netarch kernel: sd 0:0:0:0: [sda] Stopping disk
    Oct 24 20:34:40 netarch kernel: wl 0000:07:00.0: PCI INT A disabled
    Oct 24 20:34:40 netarch kernel: ehci_hcd 0000:00:1d.7: PCI INT A disabled
    Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.3: PCI INT D disabled
    Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.2: PCI INT C disabled
    Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.1: PCI INT B disabled
    Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.0: PCI INT A disabled
    Oct 24 20:34:40 netarch kernel: tg3 0000:05:00.0: PME# enabled
    Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
    Oct 24 20:34:40 netarch kernel: HDA Intel 0000:00:1b.0: PCI INT A disabled
    Oct 24 20:34:40 netarch kernel: ACPI handle has no context!
    Oct 24 20:34:40 netarch kernel: PM: suspend of devices complete after 429.517 msecs
    Oct 24 20:34:40 netarch kernel: PM: late suspend of devices complete after 13.649 msecs
    Oct 24 20:34:40 netarch kernel: ACPI: Preparing to enter system sleep state S3
    Oct 24 20:34:40 netarch kernel: PM: Saving platform NVS memory
    Oct 24 20:34:40 netarch kernel: Disabling non-boot CPUs ...
    Oct 24 20:34:40 netarch kernel: CPU 1 is now offline
    Oct 24 20:34:40 netarch kernel: SMP alternatives: switching to UP code
    Oct 24 20:34:40 netarch kernel: Extended CMOS year: 2000
    Oct 24 20:34:40 netarch kernel: Back to C!
    Oct 24 20:34:40 netarch kernel: PM: Restoring platform NVS memory
    Oct 24 20:34:40 netarch kernel: CPU0: Thermal monitoring handled by SMI
    Oct 24 20:34:40 netarch kernel: Extended CMOS year: 2000
    Oct 24 20:34:40 netarch kernel: Enabling non-boot CPUs ...
    Oct 24 20:34:40 netarch kernel: SMP alternatives: switching to SMP code
    Oct 24 20:34:40 netarch kernel: Booting Node 0 Processor 1 APIC 0x1
    Oct 24 20:34:40 netarch kernel: Initializing CPU#1
    Oct 24 20:34:40 netarch kernel: CPU1 is up
    Oct 24 20:34:40 netarch kernel: ACPI: Waking up from system sleep state S3
    Oct 24 20:34:40 netarch kernel: ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20100428/evregion-474)
    Oct 24 20:34:40 netarch kernel: ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.DSLD] (Node f7025600), AE_TIME
    Oct 24 20:34:40 netarch kernel: ACPI Error (psparse-0537): Method parse/execution failed [\_WAK] (Node f7024768), AE_TIME
    Oct 24 20:34:40 netarch kernel: ACPI Exception: AE_TIME, During Method _WAK (20100428/hwsleep-601)
    Oct 24 20:34:40 netarch kernel: i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
    Oct 24 20:34:40 netarch kernel: HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
    Oct 24 20:34:40 netarch kernel: HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100102)
    Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010b)
    Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x80118001)
    Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xf010f010)
    Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020)
    Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
    Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
    Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40207)
    Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x80318021)
    Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf020f020)
    Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030)
    Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
    Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
    Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
    Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
    Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
    Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
    Oct 24 20:34:40 netarch kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
    Oct 24 20:34:40 netarch kernel: pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
    Oct 24 20:34:40 netarch kernel: pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
    Oct 24 20:34:40 netarch kernel: ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a)
    Oct 24 20:34:40 netarch kernel: ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
    Oct 24 20:34:40 netarch kernel: tg3 0000:05:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
    Oct 24 20:34:40 netarch kernel: tg3 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x40100506)
    Oct 24 20:34:40 netarch kernel: wl 0000:07:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
    Oct 24 20:34:40 netarch kernel: wl 0000:07:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0200004)
    Oct 24 20:34:40 netarch kernel: wl 0000:07:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
    Oct 24 20:34:40 netarch kernel: wl 0000:07:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100106)
    Oct 24 20:34:40 netarch kernel: PM: early resume of devices complete after 2.675 msecs
    Oct 24 20:34:40 netarch kernel: i915 0000:00:02.0: setting latency timer to 64
    Oct 24 20:34:40 netarch kernel: HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    Oct 24 20:34:40 netarch kernel: HDA Intel 0000:00:1b.0: setting latency timer to 64
    Oct 24 20:34:40 netarch kernel: HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
    Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
    Oct 24 20:34:40 netarch kernel: usb usb2: root hub lost power or was reset
    Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
    Oct 24 20:34:40 netarch kernel: usb usb3: root hub lost power or was reset
    Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
    Oct 24 20:34:40 netarch kernel: usb usb4: root hub lost power or was reset
    Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
    Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.3: setting latency timer to 64
    Oct 24 20:34:40 netarch kernel: usb usb5: root hub lost power or was reset
    Oct 24 20:34:40 netarch kernel: ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    Oct 24 20:34:40 netarch kernel: ehci_hcd 0000:00:1d.7: setting latency timer to 64
    Oct 24 20:34:40 netarch kernel: pci 0000:00:1e.0: setting latency timer to 64
    Oct 24 20:34:40 netarch kernel: ahci 0000:00:1f.2: setting latency timer to 64
    Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
    Oct 24 20:34:40 netarch kernel: tg3 0000:05:00.0: PME# disabled
    Oct 24 20:34:40 netarch kernel: wl 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    Oct 24 20:34:40 netarch kernel: wl 0000:07:00.0: setting latency timer to 64
    Oct 24 20:34:40 netarch kernel: sd 0:0:0:0: [sda] Starting disk
    Oct 24 20:34:40 netarch kernel: ata2: SATA link down (SStatus 0 SControl 300)
    Oct 24 20:34:40 netarch kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Oct 24 20:34:40 netarch kernel: usb 3-2: reset full speed USB device using uhci_hcd and address 3
    Oct 24 20:34:40 netarch kernel: atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
    Oct 24 20:34:40 netarch kernel: atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
    Oct 24 20:34:40 netarch kernel: btusb 3-2:1.0: no reset_resume for driver btusb?
    Oct 24 20:34:40 netarch kernel: btusb 3-2:1.1: no reset_resume for driver btusb?
    Oct 24 20:34:40 netarch kernel: usb 1-8: reset high speed USB device using ehci_hcd and address 4
    Oct 24 20:34:40 netarch kernel: ata1.00: configured for UDMA/100
    Oct 24 20:34:40 netarch kernel: atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
    Oct 24 20:34:40 netarch kernel: atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
    Oct 24 20:34:40 netarch kernel: usb 3-1: reset full speed USB device using uhci_hcd and address 2
    Oct 24 20:34:40 netarch kernel: atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
    Oct 24 20:34:40 netarch kernel: atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
    Oct 24 20:34:40 netarch kernel: PM: resume of devices complete after 996.313 msecs
    Oct 24 20:34:40 netarch kernel: PM: Finishing wakeup.
    Oct 24 20:34:40 netarch kernel: Restarting tasks ...
    Oct 24 20:34:40 netarch kernel: atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
    Oct 24 20:34:40 netarch kernel: atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
    Oct 24 20:34:40 netarch kernel: done.
    Oct 24 20:34:40 netarch kernel: video LNXVIDEO:00: Restoring backlight state
    Oct 24 20:34:40 netarch kernel: atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
    Oct 24 20:34:40 netarch kernel: atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
    Oct 24 20:34:40 netarch kernel: atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
    Oct 24 20:34:40 netarch kernel: atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
    Oct 24 20:34:40 netarch kernel: tg3 0000:05:00.0: eth0: Link is down
    Oct 24 20:34:41 netarch kernel: tg3 0000:05:00.0: eth0: Link is down
    Oct 24 20:34:43 netarch kernel: ata1.00: configured for UDMA/100
    Oct 24 20:34:43 netarch kernel: ata1: EH complete
    Oct 24 20:34:44 netarch kernel: EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
    dmesg:
    Initializing cgroup subsys cpuset
    Initializing cgroup subsys cpu
    Linux version 2.6.35-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Wed Sep 29 07:17:20 UTC 2010
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
    BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
    BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
    BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000007f5d0000 (usable)
    BIOS-e820: 000000007f5d0000 - 000000007f5e0000 (ACPI data)
    BIOS-e820: 000000007f5e0000 - 000000007f5e3000 (ACPI NVS)
    BIOS-e820: 000000007f5e3000 - 0000000080000000 (reserved)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    DMI 2.5 present.
    e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
    e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    last_pfn = 0x7f5d0 max_arch_pfn = 0x100000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-D3FFF write-protect
    D4000-DFFFF uncachable
    E0000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 000000000 mask 080000000 write-back
    1 base 07F600000 mask 0FFE00000 uncachable
    2 base 07F800000 mask 0FF800000 uncachable
    3 disabled
    4 disabled
    5 disabled
    6 disabled
    7 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
    Scanning 1 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000001000 (reserved)
    modified: 0000000000001000 - 0000000000002000 (usable)
    modified: 0000000000002000 - 0000000000010000 (reserved)
    modified: 0000000000010000 - 000000000009dc00 (usable)
    modified: 000000000009dc00 - 00000000000a0000 (reserved)
    modified: 00000000000d2000 - 00000000000d4000 (reserved)
    modified: 00000000000dc000 - 00000000000e0000 (reserved)
    modified: 00000000000e4000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 000000007f5d0000 (usable)
    modified: 000000007f5d0000 - 000000007f5e0000 (ACPI data)
    modified: 000000007f5e0000 - 000000007f5e3000 (ACPI NVS)
    modified: 000000007f5e3000 - 0000000080000000 (reserved)
    modified: 00000000e0000000 - 00000000f0000000 (reserved)
    modified: 00000000fec00000 - 00000000fec10000 (reserved)
    modified: 00000000fee00000 - 00000000fee01000 (reserved)
    modified: 00000000ff000000 - 0000000100000000 (reserved)
    initial memory mapped : 0 - 01800000
    found SMP MP-table at [c00f7cb0] f7cb0
    init_memory_mapping: 0000000000000000-00000000377fe000
    0000000000 - 0000400000 page 4k
    0000400000 - 0037400000 page 2M
    0037400000 - 00377fe000 page 4k
    kernel direct mapping tables up to 377fe000 @ 15000-1a000
    RAMDISK: 37e2a000 - 37ff0000
    Allocated new RAMDISK: 00100000 - 002c5f93
    Move RAMDISK from 0000000037e2a000 - 0000000037feff92 to 00100000 - 002c5f92
    ACPI: RSDP 000f7c80 00024 (v04 PTLTD )
    ACPI: XSDT 7f5d72d4 00074 (v01 LENOVO CB-01 06040000 LTP 00000000)
    ACPI: FACP 7f5dfc60 000F4 (v03 LENOVO CB-01 06040000 PTL 00000002)
    ACPI: DSDT 7f5d846a 07782 (v01 LENOVO CB-01 06040000 MSFT 03000000)
    ACPI: FACS 7f5e2fc0 00040
    ACPI: TCPA 7f5dfd54 00032 (v01 Phoeni x 06040000 TL 00000000)
    ACPI: MCFG 7f5dfd86 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
    ACPI: HPET 7f5dfdc2 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
    ACPI: APIC 7f5dfdfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
    ACPI: BOOT 7f5dfe62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
    ACPI: SLIC 7f5dfe8a 00176 (v01 LENOVO CB-01 06040000 LTP 00000000)
    ACPI: SSDT 7f5d78ca 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
    ACPI: SSDT 7f5d7824 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
    ACPI: SSDT 7f5d7348 004DC (v02 PmRef CpuPm 00003000 INTL 20050624)
    ACPI: Local APIC address 0xfee00000
    1149MB HIGHMEM available.
    887MB LOWMEM available.
    mapped low ram: 0 - 377fe000
    low ram: 0 - 377fe000
    Zone PFN ranges:
    DMA 0x00000001 -> 0x00001000
    Normal 0x00001000 -> 0x000377fe
    HighMem 0x000377fe -> 0x0007f5d0
    Movable zone start PFN for each node
    early_node_map[3] active PFN ranges
    0: 0x00000001 -> 0x00000002
    0: 0x00000010 -> 0x0000009d
    0: 0x00000100 -> 0x0007f5d0
    On node 0 totalpages: 521566
    free_area_init_node: node 0, pgdat c1418ac0, node_mem_map c157b020
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 3950 pages, LIFO batch:0
    Normal zone: 1744 pages used for memmap
    Normal zone: 221486 pages, LIFO batch:31
    HighMem zone: 2300 pages used for memmap
    HighMem zone: 292054 pages, LIFO batch:31
    Using APIC driver default
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0xffffffff base: 0xfed00000
    SMP: Allowing 2 CPUs, 0 hotplug CPUs
    nr_irqs_gsi: 40
    early_res array is doubled to 64 at [16000 - 167ff]
    PM: Registered nosave memory: 0000000000002000 - 0000000000010000
    PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
    PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
    PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
    PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
    PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
    Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
    Booting paravirtualized kernel on bare hardware
    setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    PERCPU: Embedded 14 pages/cpu @c2800000 s34880 r0 d22464 u2097152
    pcpu-alloc: s34880 r0 d22464 u2097152 alloc=1*4194304
    pcpu-alloc: [0] 0 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517490
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz26 root=/dev/sda5
    PID hash table entries: 4096 (order: 2, 16384 bytes)
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    allocated 10433580 bytes of page_cgroup
    please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Subtract (53 early reservations)
    #1 [0000001000 - 0000002000] EX TRAMPOLINE
    #2 [0001000000 - 0001572184] TEXT DATA BSS
    #3 [0001573000 - 000157921c] BRK
    #4 [00000f7cc0 - 0000100000] BIOS reserved
    #5 [00000f7cb0 - 00000f7cc0] MP-table mpf
    #6 [000009dc00 - 000009e071] BIOS reserved
    #7 [000009e199 - 00000f7cb0] BIOS reserved
    #8 [000009e071 - 000009e199] MP-table mpc
    #9 [0000010000 - 0000011000] TRAMPOLINE
    #10 [0000011000 - 0000015000] ACPI WAKEUP
    #11 [0000015000 - 0000016000] PGTABLE
    #12 [0000100000 - 00002c6000] NEW RAMDISK
    #13 [000157a000 - 000157b000] BOOTMEM
    #14 [000157b000 - 000256b000] BOOTMEM
    #15 [00015721c0 - 00015721c4] BOOTMEM
    #16 [0001572200 - 00015722c0] BOOTMEM
    #17 [00015722c0 - 0001572314] BOOTMEM
    #18 [000256b000 - 000256e000] BOOTMEM
    #19 [0001572340 - 00015723ac] BOOTMEM
    #20 [000256e000 - 0002574000] BOOTMEM
    #21 [00015723c0 - 00015723e5] BOOTMEM
    #22 [0001572400 - 0001572427] BOOTMEM
    #23 [0001572440 - 0001572600] BOOTMEM
    #24 [0001572600 - 0001572640] BOOTMEM
    #25 [0001572640 - 0001572680] BOOTMEM
    #26 [0001572680 - 00015726c0] BOOTMEM
    #27 [00015726c0 - 0001572700] BOOTMEM
    #28 [0001572700 - 0001572740] BOOTMEM
    #29 [0001572740 - 0001572780] BOOTMEM
    #30 [0001572780 - 00015727c0] BOOTMEM
    #31 [00015727c0 - 0001572800] BOOTMEM
    #32 [0001572800 - 0001572840] BOOTMEM
    #33 [0001572840 - 0001572880] BOOTMEM
    #34 [0001572880 - 00015728c0] BOOTMEM
    #35 [00015728c0 - 0001572900] BOOTMEM
    #36 [0001572900 - 0001572940] BOOTMEM
    #37 [0001572940 - 0001572950] BOOTMEM
    #38 [0001572980 - 0001572990] BOOTMEM
    #39 [00015729c0 - 00015729ea] BOOTMEM
    #40 [0001572a00 - 0001572a2a] BOOTMEM
    #41 [0002800000 - 000280e000] BOOTMEM
    #42 [0002a00000 - 0002a0e000] BOOTMEM
    #43 [0001572a40 - 0001572a44] BOOTMEM
    #44 [0001572a80 - 0001572a84] BOOTMEM
    #45 [0001572ac0 - 0001572ac8] BOOTMEM
    #46 [0001572b00 - 0001572b08] BOOTMEM
    #47 [0001572b40 - 0001572be8] BOOTMEM
    #48 [0001572c00 - 0001572c68] BOOTMEM
    #49 [0002574000 - 0002578000] BOOTMEM
    #50 [0002578000 - 00025f8000] BOOTMEM
    #51 [00025f8000 - 0002638000] BOOTMEM
    #52 [0002a0e000 - 000340142c] BOOTMEM
    Initializing HighMem for node 0 (000377fe:0007f5d0)
    Memory: 2051364k/2086720k available (2986k kernel code, 34900k reserved, 1238k data, 412k init, 1177416k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc1421000 - 0xc1488000 ( 412 kB)
    .data : 0xc12eaacc - 0xc1420340 (1238 kB)
    .text : 0xc1000000 - 0xc12eaacc (2986 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    Hierarchical RCU implementation.
    RCU-based detection of stalled CPUs is disabled.
    Verbose stalled-CPUs detection is disabled.
    NR_IRQS:512
    Extended CMOS year: 2000
    Console: colour VGA+ 80x25
    console [tty0] enabled
    hpet clockevent registered
    Fast TSC calibration using PIT
    Detected 1828.625 MHz processor.
    Calibrating delay loop (skipped), value calculated using timer frequency.. 3658.63 BogoMIPS (lpj=6095416)
    pid_max: default: 32768 minimum: 301
    Security Framework initialized
    Mount-cache hash table entries: 512
    Initializing cgroup subsys ns
    Initializing cgroup subsys cpuacct
    Initializing cgroup subsys memory
    Initializing cgroup subsys devices
    Initializing cgroup subsys freezer
    Initializing cgroup subsys net_cls
    Initializing cgroup subsys blkio
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    mce: CPU supports 5 MCE banks
    CPU0: Thermal monitoring enabled (TM1)
    using mwait in idle threads.
    Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
    ... version: 3
    ... bit width: 40
    ... generic registers: 2
    ... value mask: 000000ffffffffff
    ... max period: 000000007fffffff
    ... fixed-purpose events: 3
    ... event mask: 0000000700000003
    ACPI: Core revision 20100428
    Enabling APIC mode: Flat. Using 1 I/O APICs
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Atom(TM) CPU N470 @ 1.83GHz stepping 0a
    Booting Node 0, Processors #1 Ok.
    Initializing CPU#1
    Brought up 2 CPUs
    Total of 2 processors activated (7317.54 BogoMIPS).
    devtmpfs: initialized
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: MMCONFIG for domain 0000 [bus 00-10] at [mem 0xe0000000-0xe10fffff] (base 0xe0000000)
    PCI: MMCONFIG at [mem 0xe0000000-0xe10fffff] reserved in E820
    PCI: Using MMCONFIG for extended config space
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: SSDT 7f5d8193 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
    ACPI: SSDT 7f5d7b29 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
    ACPI: SSDT 7f5d8396 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
    ACPI: SSDT 7f5d810e 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
    ACPI: No dock devices found.
    PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
    ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701f390), AE_ALREADY_EXISTS
    ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
    ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
    pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
    pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xf7ffffff]
    pci_root PNP0A08:00: host bridge window [io 0x0d00-0xfdff]
    pci 0000:00:02.0: reg 10: [mem 0xf0300000-0xf037ffff]
    pci 0000:00:02.0: reg 14: [io 0x18e8-0x18ef]
    pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
    pci 0000:00:02.0: reg 1c: [mem 0xf0000000-0xf00fffff]
    pci 0000:00:02.1: reg 10: [mem 0xf0380000-0xf03fffff]
    pci 0000:00:1b.0: reg 10: [mem 0xf0400000-0xf0403fff 64bit]
    pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1b.0: PME# disabled
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.1: PME# disabled
    pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
    pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
    pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
    pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
    pci 0000:00:1d.7: reg 10: [mem 0xf0604000-0xf06043ff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1f.2: reg 10: [io 0x18e0-0x18e7]
    pci 0000:00:1f.2: reg 14: [io 0x18d4-0x18d7]
    pci 0000:00:1f.2: reg 18: [io 0x18d8-0x18df]
    pci 0000:00:1f.2: reg 1c: [io 0x18d0-0x18d3]
    pci 0000:00:1f.2: reg 20: [io 0x18c0-0x18cf]
    pci 0000:00:1f.2: reg 24: [mem 0xf0604400-0xf06047ff]
    pci 0000:00:1f.2: PME# supported from D3hot
    pci 0000:00:1f.2: PME# disabled
    pci 0000:00:1f.3: reg 20: [io 0x18a0-0x18bf]
    pci 0000:05:00.0: reg 10: [mem 0xf0100000-0xf010ffff 64bit]
    pci 0000:05:00.0: PME# supported from D3hot D3cold
    pci 0000:05:00.0: PME# disabled
    pci 0000:00:1c.0: PCI bridge to [bus 05-05]
    pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff]
    pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:07:00.0: reg 10: [mem 0xf0200000-0xf0203fff 64bit]
    pci 0000:07:00.0: supports D1 D2
    pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
    pci 0000:07:00.0: PME# disabled
    pci 0000:00:1c.1: PCI bridge to [bus 07-07]
    pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf02fffff]
    pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:1e.0: PCI bridge to [bus 11-11] (subtractive decode)
    pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x80000000-0xf7ffffff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [io 0x0d00-0xfdff] (subtractive decode)
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
    ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701f390), AE_ALREADY_EXISTS
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    HEST: Table is not found!
    vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    vgaarb: loaded
    PCI: Using ACPI for IRQ routing
    PCI: pci_cache_line_size set to 64 bytes
    reserve RAM buffer: 0000000000002000 - 000000000000ffff
    reserve RAM buffer: 000000000009dc00 - 000000000009ffff
    reserve RAM buffer: 000000007f5d0000 - 000000007fffffff
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    Switching to clocksource tsc
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 10 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:01: [io 0x0800-0x080f] has been reserved
    system 00:01: [io 0x1000-0x107f] has been reserved
    system 00:01: [io 0x1180-0x11bf] has been reserved
    system 00:01: [io 0x04d0-0x04d1] has been reserved
    system 00:01: [io 0xfe00] has been reserved
    system 00:01: [io 0x0700-0x070f] has been reserved
    system 00:01: [io 0x164e-0x174c] has been reserved
    system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
    system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
    system 00:01: [mem 0xfef00000-0xfeffffff] has been reserved
    pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
    pci 0000:00:1c.1: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
    pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
    pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
    pci 0000:00:1c.0: PCI bridge to [bus 05-05]
    pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff]
    pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref]
    pci 0000:00:1c.1: PCI bridge to [bus 07-07]
    pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
    pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf02fffff]
    pci 0000:00:1c.1: bridge window [mem 0x80200000-0x803fffff 64bit pref]
    pci 0000:00:1e.0: PCI bridge to [bus 11-11]
    pci 0000:00:1e.0: bridge window [io disabled]
    pci 0000:00:1e.0: bridge window [mem disabled]
    pci 0000:00:1e.0: bridge window [mem pref disabled]
    pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:1c.0: setting latency timer to 64
    pci 0000:00:1c.1: enabling device (0000 -> 0003)
    pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1c.1: setting latency timer to 64
    pci 0000:00:1e.0: setting latency timer to 64
    pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
    pci_bus 0000:00: resource 6 [mem 0x000d4000-0x000d7fff]
    pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000dbfff]
    pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000e3fff]
    pci_bus 0000:00: resource 9 [mem 0x80000000-0xf7ffffff]
    pci_bus 0000:00: resource 10 [io 0x0d00-0xfdff]
    pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
    pci_bus 0000:05: resource 1 [mem 0xf0100000-0xf01fffff]
    pci_bus 0000:05: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
    pci_bus 0000:07: resource 0 [io 0x3000-0x3fff]
    pci_bus 0000:07: resource 1 [mem 0xf0200000-0xf02fffff]
    pci_bus 0000:07: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
    pci_bus 0000:11: resource 4 [io 0x0000-0x0cf7]
    pci_bus 0000:11: resource 5 [mem 0x000a0000-0x000bffff]
    pci_bus 0000:11: resource 6 [mem 0x000d4000-0x000d7fff]
    pci_bus 0000:11: resource 7 [mem 0x000d8000-0x000dbfff]
    pci_bus 0000:11: resource 8 [mem 0x000e0000-0x000e3fff]
    pci_bus 0000:11: resource 9 [mem 0x80000000-0xf7ffffff]
    pci_bus 0000:11: resource 10 [io 0x0d00-0xfdff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    UDP hash table entries: 512 (order: 2, 16384 bytes)
    UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    NET: Registered protocol family 1
    pci 0000:00:02.0: Boot video device
    PCI: CLS 32 bytes, default 64
    Unpacking initramfs...
    Freeing initrd memory: 1816k freed
    Simple Boot Flag at 0x36 set to 0x1
    apm: BIOS not found.
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1287944823.419:1): initialized
    highmem bounce pool size: 64 pages
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1710
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pcieport 0000:00:1c.0: setting latency timer to 64
    pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    pcieport 0000:00:1c.1: setting latency timer to 64
    pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
    ERST: Table is not found!
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    i8042.c: Detected active multiplexing controller, rev 1.1.
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX0 port at 0x60,0x64 irq 12
    serio: i8042 AUX1 port at 0x60,0x64 irq 12
    serio: i8042 AUX2 port at 0x60,0x64 irq 12
    serio: i8042 AUX3 port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    PM: Resume from disk failed.
    registered taskstats version 1
    Initalizing network drop monitor service
    Freeing unused kernel memory: 412k freed
    udev[38]: starting version 162
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
    atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
    atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
    atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
    SCSI subsystem initialized
    atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
    atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
    libata version 3.00 loaded.
    ahci 0000:00:1f.2: version 3.0
    ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
    ahci: SSS flag set, parallel bus scan disabled
    ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
    ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part
    ahci 0000:00:1f.2: setting latency timer to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    scsi3 : ahci
    ata1: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604500 irq 42
    ata2: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604580 irq 42
    ata3: DUMMY
    ata4: DUMMY
    atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
    atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1.00: ATA-8: ST9250315AS, 0010LVM1, max UDMA/100
    ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    ata1.00: configured for UDMA/100
    scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0010 PQ: 0 ANSI: 5
    ata2: SATA link down (SStatus 0 SControl 300)
    sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4 sda5
    sd 0:0:0:0: [sda] Attached SCSI disk
    PM: Marking nosave pages: 0000000000002000 - 0000000000010000
    PM: Marking nosave pages: 000000000009d000 - 0000000000100000
    PM: Basic memory bitmaps created
    PM: Basic memory bitmaps freed
    EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    rtc_cmos 00:05: RTC can wake from S4
    rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    udev[734]: starting version 162
    ACPI: acpi_idle registered with cpuidle
    Monitor-Mwait will be used to enter C-1 state
    Monitor-Mwait will be used to enter C-2 state
    Monitor-Mwait will be used to enter C-3 state
    Marking TSC unstable due to TSC halts in idle
    Switching to clocksource hpet
    input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0C:00/input/input1
    ACPI: Power Button [PWRB]
    input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
    coretemp coretemp.0: Unable to read TjMax from CPU.
    coretemp coretemp.0: Using relative temperature scale!
    ACPI: Lid Switch [LID]
    ------------[ cut here ]------------
    WARNING: at fs/proc/generic.c:583 proc_register+0xf8/0x1e0()
    Hardware name: 20040M18
    proc_dir_entry 'power/PWRB' already registered
    Modules linked in: coretemp button(+) serio_raw acpi_cpufreq freq_table processor mperf rtc_cmos rtc_core rtc_lib ext4 mbcache jbd2 crc16 sd_mod ahci libahci libata scsi_mod
    Pid: 1097, comm: modprobe Not tainted 2.6.35-ARCH #1
    Call Trace:
    [<c10439bd>] warn_slowpath_common+0x6d/0xa0
    [<c113e648>] ? proc_register+0xf8/0x1e0
    [<c113e648>] ? proc_register+0xf8/0x1e0
    [<c1043a6e>] warn_slowpath_fmt+0x2e/0x30
    [<c113e648>] proc_register+0xf8/0x1e0
    [<c113eca3>] proc_mkdir_mode+0x33/0x50
    [<c113eccf>] proc_mkdir+0xf/0x20
    [<f82af453>] acpi_button_add+0x21b/0x387 [button]
    [<c11cc665>] acpi_device_probe+0x3a/0xf4
    [<c121eae7>] driver_probe_device+0x77/0x180
    [<c121ec69>] __driver_attach+0x79/0x80
    [<c121dcb3>] bus_for_each_dev+0x43/0x70
    [<c121e839>] driver_attach+0x19/0x20
    [<c121ebf0>] ? __driver_attach+0x0/0x80
    [<c121e3ed>] bus_add_driver+0xbd/0x2e0
    [<c11cc59b>] ? acpi_device_remove+0x0/0x90
    [<c121ee65>] driver_register+0x65/0x110
    [<c113eca3>] ? proc_mkdir_mode+0x33/0x50
    [<c11ccd53>] acpi_bus_register_driver+0x3a/0x3c
    [<f82b202b>] acpi_button_init+0x2b/0x4a [button]
    [<c100120d>] do_one_initcall+0x2d/0x190
    [<f82b2000>] ? acpi_button_init+0x0/0x4a [button]
    [<c107892b>] sys_init_module+0x9b/0x1e0
    [<c10f4f8f>] ? sys_close+0x6f/0xc0
    [<c100379f>] sysenter_do_call+0x12/0x28
    ---[ end trace 475801f928d07a3d ]---
    input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:01/input/input3
    ACPI: Power Button [PWRB]
    input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
    ACPI: Sleep Button [SLPB]
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    ACPI: Power Button [PWRF]
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [TZ01] (60 C)
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    lib80211: common routines for IEEE802.11 drivers
    lib80211_crypt: registered algorithm 'NULL'
    atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
    atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
    Linux agpgart interface v0.103
    i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    ACPI: AC Adapter [ACAD] (on-line)
    wl: module license 'Mixed/Proprietary' taints kernel.
    Disabling lock debugging due to kernel taint
    ACPI: WMI: Mapper loaded
    atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
    atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
    agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
    agpgart-intel 0000:00:00.0: detected 8188K stolen memory
    agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    tg3.c:v3.110 (April 9, 2010)
    tg3 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    tg3 0000:05:00.0: setting latency timer to 64
    wl 0000:07:00.0: enabling device (0104 -> 0106)
    wl 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    wl 0000:07:00.0: setting latency timer to 64
    ACPI: Battery Slot [BAT1] (battery present)
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1d.7: using broken periodic workaround
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0604000
    tg3 mdio bus: probed
    tg3 0000:05:00.0: eth1: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address c8:0a:a9:3b:be:4d
    tg3 0000:05:00.0: eth1: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=500:01)
    tg3 0000:05:00.0: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
    tg3 0000:05:00.0: eth1: dma_rwctrl[76180000] dma_mask[64-bit]
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 8 ports detected
    uhci_hcd: USB Universal Host Controller Interface driver
    uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
    uhci_hcd 0000:00:1d.3: setting latency timer to 64
    uhci_hcd 0000:00:1d.3: UHCI Host Controller
    uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
    lib80211_crypt: registered algorithm 'TKIP'
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    eth0: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.60.48.36
    udev[757]: renamed network interface eth1 to eth1-eth0
    udev[756]: renamed network interface eth0 to wlan0
    udev[757]: renamed network interface eth1-eth0 to eth0
    [drm] Initialized drm 1.1.0 20060810
    HDA Intel 0000:00:1b.0: enabling device (0104 -> 0106)
    HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
    HDA Intel 0000:00:1b.0: setting latency timer to 64
    usb 1-8: new high speed USB device using ehci_hcd and address 4
    i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    i915 0000:00:02.0: setting latency timer to 64
    i915 0000:00:02.0: irq 44 for MSI/MSI-X
    [drm] set up 7M of stolen space
    Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xa40000/0x4a0500
    input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
    usb 3-1: new full speed USB device using uhci_hcd and address 2
    [drm] initialized overlay support
    Linux video capture interface: v2.00
    uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (04f2:b1a1)
    input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input7
    usbcore: registered new interface driver uvcvideo
    USB Video Class driver (v0.1.0)
    usb 3-2: new full speed USB device using uhci_hcd and address 3
    usbcore: registered new interface driver hiddev
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    Console: switching to colour frame buffer device 128x37
    fb0: inteldrmfb frame buffer device
    drm: registered panic notifier
    Slow work thread pool: Starting up
    Slow work thread pool: Ready
    ACPI Warning: _BQC returned an invalid level (20100428/video-640)
    acpi device:03: registered as cooling_device2
    input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
    ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    Bluetooth: Core ver 2.15
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: Generic Bluetooth USB driver ver 0.6
    usbcore: registered new interface driver btusb
    input: Cando Corporation Cando 10.1 Multi Touch Panel with Controller as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input9
    cando-touch 0003:2087:0A01.0001: input,hidraw0: USB HID v1.11 Device [Cando Corporation Cando 10.1 Multi Touch Panel with Controller] on usb-0000:00:1d.1-1/input0
    EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
    EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
    Adding 1952764k swap on /dev/sda2. Priority:-1 extents:1 across:1952764k
    tg3 0000:05:00.0: irq 45 for MSI/MSI-X
    tg3 0000:05:00.0: eth0: Link is down
    CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
    tg3 0000:05:00.0: eth0: Link is down
    WARNING! power/level is deprecated; use power/control instead
    CE: hpet increased min_delta_ns to 7500 nsec
    ata1.00: configured for UDMA/100
    ata1: EH complete
    EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
    PM: Syncing filesystems ... done.
    PM: Preparing system for mem sleep
    Freezing user space processes ... (elapsed 0.01 seconds) done.
    Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
    PM: Entering mem sleep
    Suspending console(s) (use no_console_suspend to debug)
    sd 0:0:0:0: [sda] Synchronizing SCSI cache
    sd 0:0:0:0: [sda] Stopping disk
    wl 0000:07:00.0: PCI INT A disabled
    ehci_hcd 0000:00:1d.7: PCI INT A disabled
    uhci_hcd 0000:00:1d.3: PCI INT D disabled
    uhci_hcd 0000:00:1d.2: PCI INT C disabled
    uhci_hcd 0000:00:1d.1: PCI INT B disabled
    uhci_hcd 0000:00:1d.0: PCI INT A disabled
    tg3 0000:05:00.0: PME# enabled
    pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
    HDA Intel 0000:00:1b.0: PCI INT A disabled
    ACPI handle has no context!
    PM: suspend of devices complete after 429.517 msecs
    PM: late suspend of devices complete after 13.649 msecs
    ACPI: Preparing to enter system sleep state S3
    PM: Saving platform NVS memory
    Disabling non-boot CPUs ...
    CPU 1 is now offline
    SMP alternatives: switching to UP code
    Extended CMOS year: 2000
    Back to C!
    PM: Restoring platform NVS memory
    CPU0: Thermal monitoring handled by SMI
    Extended CMOS year: 2000
    Enabling non-boot CPUs ...
    SMP alternatives: switching to SMP code
    Booting Node 0 Processor 1 APIC 0x1
    Initializing CPU#1
    CPU1 is up
    ACPI: Waking up from system sleep state S3
    ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20100428/evregion-474)
    ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.DSLD] (Node f7025600), AE_TIME
    ACPI Error (psparse-0537): Method parse/execution failed [\_WAK] (Node f7024768), AE_TIME
    ACPI Exception: AE_TIME, During Method _WAK (20100428/hwsleep-601)
    i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
    HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
    HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100102)
    pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010b)
    pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x80118001)
    pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xf010f010)
    pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020)
    pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
    pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
    pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40207)
    pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x80318021)
    pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf020f020)
    pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030)
    pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
    pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
    uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
    uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
    uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
    uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
    ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
    pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
    pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
    ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a)
    ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
    tg3 0000:05:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
    tg3 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x40100506)
    wl 0000:07:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
    wl 0000:07:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0200004)
    wl 0000:07:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
    wl 0000:07:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100106)
    PM: early resume of devices complete after 2.675 msecs
    i915 0000:00:02.0: setting latency timer to 64
    HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    HDA Intel 0000:00:1b.0: setting latency timer to 64
    HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
    uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    usb usb2: root hub lost power or was reset
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    usb usb3: root hub lost power or was reset
    uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    usb usb4: root hub lost power or was reset
    uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
    uhci_hcd 0000:00:1d.3: setting latency timer to 64
    usb usb5: root hub lost power or was reset
    ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    pci 0000:00:1e.0: setting latency timer to 64
    ahci 0000:00:1f.2: setting latency timer to 64
    pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
    tg3 0000:05:00.0: PME# disabled
    wl 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    wl 0000:07:00.0: setting latency timer to 64
    sd 0:0:0:0: [sda] Starting disk
    ata2: SATA link down (SStatus 0 SControl 300)
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    usb 3-2: reset full speed USB device using uhci_hcd and address 3
    atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
    atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
    btusb 3-2:1.0: no reset_resume for driver btusb?
    btusb 3-2:1.1: no reset_resume for driver btusb?
    usb 1-8: reset high speed USB device using ehci_hcd and address 4
    ata1.00: configured for UDMA/100
    atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
    atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
    usb 3-1: reset full speed USB device using uhci_hcd and address 2
    atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
    atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
    PM: resume of devices complete after 996.313 msecs
    PM: Finishing wakeup.
    Restarting tasks ...
    atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
    atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
    done

    korpenkraxar wrote:
    Try this with a kernel 3.X version:
    hpet=disable highres=off nohz=off
    I have been trying to resolve the issue of suspend failing to resume on me Lenovo s10-3 (not the touch screen) for what seems an aeon.
    A profound thank you to you all.
    hpet=disable highres=off nohz=off
    Works!
    I now have no indication lights showing when the machine is suspended? But finally I can close the lid and reopen to resume - fantastic, this machine may finally see some more use.
    I am running Linux Mint Debian Edition (LMDE) running Gnome 3 with 3 series kernels (presently liquorix 3.4.0-4.dmz.1-liquorix-686)

  • Eth0 with e1000e stopped working after upgrade to 3.6.2

    Hi!
    After the recent upgrade my eth0 network device does not come up properly anymore.  The Laptop is a Thinkpad x60s and I use the e1000e kernel module for the network card.  After a suspend/wakeup cycle the card/device works properly BTW.. Any help on this would be appreciated!
    ifconfig gives me the following output for eth0:
    eth0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
    ether 00:16:d3:3b:ac:45 txqueuelen 1000 (Ethernet)
    RX packets 0 bytes 0 (0.0 B)
    RX errors 0 dropped 0 overruns 0 frame 0
    TX packets 0 bytes 0 (0.0 B)
    TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
    device interrupt 16 memory 0xee000000-ee020000
    this section of the dmesg output seems to be suspicient:
    [ 21.226766] e1000e 0000:02:00.0: eth0: Error reading PHY register
    [ 21.227634] e1000e 0000:02:00.0: eth0: Error reading PHY register
    [ 21.228495] e1000e 0000:02:00.0: eth0: Error reading PHY register
    [ 21.229355] e1000e 0000:02:00.0: eth0: Error reading PHY register
    [ 21.230243] e1000e 0000:02:00.0: eth0: Error reading PHY register
    [ 21.232686] e1000e 0000:02:00.0: eth0: Error reading PHY register
    [ 21.233594] e1000e 0000:02:00.0: eth0: Error reading PHY register
    [ 21.234705] e1000e 0000:02:00.0: eth0: Error reading PHY register
    [ 21.235571] e1000e 0000:02:00.0: eth0: Error reading PHY register
    [ 21.236432] e1000e 0000:02:00.0: eth0: Error reading PHY register
    [ 21.249538] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
    [ 21.249639] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 21.927013] e1000e 0000:02:00.0: eth0: Cannot change link characteristics when SoL/IDER is active.
    [ 21.930111] e1000e 0000:02:00.0: eth0: Cannot change link characteristics when SoL/IDER is active.
    [ 22.484883] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=360
    [ 22.523746] EXT4-fs (dm-0): re-mounted. Opts: data=ordered,commit=360
    [ 22.555973] EXT4-fs (sda1): re-mounted. Opts: (null)
    [ 25.677082] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 31.123064] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X
    [ 31.223549] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X
    [ 31.224213] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 37.550719] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 37.616891] e1000e 0000:02:00.0: Disabling ASPM L0s L1
    [ 37.617086] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X
    [ 37.619424] e1000e 0000:02:00.0: eth0: MAC Wakeup cause - Link Status Change
    [ 37.783054] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X
    [ 37.883540] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X
    full dmesg output:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.6.2-1-ARCH (tobias@testing) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Sat Oct 13 07:19:40 CEST 2012
    [ 0.000000] Disabled fast string operations
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f6cffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007f6d0000-0x000000007f6defff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000007f6df000-0x000000007f6fffff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000007f700000-0x000000007fffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI present.
    [ 0.000000] DMI: LENOVO 17033WG/17033WG, BIOS 7BETD7WW (2.18 ) 11/20/2008
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] e820: last_pfn = 0x7f6d0 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-DBFFF uncachable
    [ 0.000000] DC000-DFFFF write-back
    [ 0.000000] E0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable
    [ 0.000000] 2 base 07F800000 mask FFF800000 uncachable
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] PAT not supported by CPU.
    [ 0.000000] found SMP MP-table at [mem 0x000f67f0-0x000f67ff] mapped at [c00f67f0]
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x00bfffff]
    [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x377fdfff]
    [ 0.000000] [mem 0x00000000-0x003fffff] page 4k
    [ 0.000000] [mem 0x00400000-0x373fffff] page 2M
    [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
    [ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x00bfa000-0x00bfffff]
    [ 0.000000] RAMDISK: [mem 0x7f3ee000-0x7f6cefff]
    [ 0.000000] Allocated new RAMDISK: [mem 0x3751d000-0x377fd609]
    [ 0.000000] Move RAMDISK from [mem 0x7f3ee000-0x7f6ce609] to [mem 0x3751d000-0x377fd609]
    [ 0.000000] ACPI: RSDP 000f67c0 00024 (v02 LENOVO)
    [ 0.000000] ACPI: XSDT 7f6d179e 00094 (v01 LENOVO TP-7B 00002180 LTP 00000000)
    [ 0.000000] ACPI: FACP 7f6d1900 000F4 (v03 LENOVO TP-7B 00002180 LNVO 00000001)
    [ 0.000000] ACPI BIOS Bug: Warning: 32/64X length mismatch in FADT/Gpe1Block: 0/32 (20120711/tbfadt-567)
    [ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20120711/tbfadt-598)
    [ 0.000000] ACPI: DSDT 7f6d1c90 0CFB9 (v01 LENOVO TP-7B 00002180 MSFT 0100000E)
    [ 0.000000] ACPI: FACS 7f6f4000 00040
    [ 0.000000] ACPI: SSDT 7f6d1ab4 001DC (v01 LENOVO TP-7B 00002180 MSFT 0100000E)
    [ 0.000000] ACPI: ECDT 7f6dec49 00052 (v01 LENOVO TP-7B 00002180 LNVO 00000001)
    [ 0.000000] ACPI: TCPA 7f6dec9b 00032 (v02 LENOVO TP-7B 00002180 LNVO 00000001)
    [ 0.000000] ACPI: APIC 7f6deccd 00068 (v01 LENOVO TP-7B 00002180 LNVO 00000001)
    [ 0.000000] ACPI: MCFG 7f6ded35 0003C (v01 LENOVO TP-7B 00002180 LNVO 00000001)
    [ 0.000000] ACPI: HPET 7f6ded71 00038 (v01 LENOVO TP-7B 00002180 LNVO 00000001)
    [ 0.000000] ACPI: SLIC 7f6dee62 00176 (v01 LENOVO TP-7B 00002180 LTP 00000000)
    [ 0.000000] ACPI: BOOT 7f6defd8 00028 (v01 LENOVO TP-7B 00002180 LTP 00000001)
    [ 0.000000] ACPI: SSDT 7f6f2645 0025F (v01 LENOVO TP-7B 00002180 INTL 20050513)
    [ 0.000000] ACPI: SSDT 7f6f28a4 000A6 (v01 LENOVO TP-7B 00002180 INTL 20050513)
    [ 0.000000] ACPI: SSDT 7f6f294a 004F7 (v01 LENOVO TP-7B 00002180 INTL 20050513)
    [ 0.000000] ACPI: SSDT 7f6f2e41 008BD (v01 LENOVO TP-7B 00002180 INTL 20050513)
    [ 0.000000] ACPI: SSDT 7f6f36fe 006AC (v01 LENOVO TP-7B 00002180 INTL 20050513)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 1150MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] Normal [mem 0x01000000-0x377fdfff]
    [ 0.000000] HighMem [mem 0x377fe000-0x7f6cffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009efff]
    [ 0.000000] node 0: [mem 0x00100000-0x7f6cffff]
    [ 0.000000] On node 0 totalpages: 521823
    [ 0.000000] free_area_init_node: node 0, pgdat c064fec0, node_mem_map f652c200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 2302 pages used for memmap
    [ 0.000000] HighMem zone: 292308 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
    [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
    [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
    [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
    [ 0.000000] e820: [mem 0x80000000-0xefffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 13 pages/cpu @f6506000 s32320 r0 d20928 u53248
    [ 0.000000] pcpu-alloc: s32320 r0 d20928 u53248 alloc=13*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517745
    [ 0.000000] Kernel command line: root=/dev/sda3 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] Initializing CPU#0
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0007f6d0)
    [ 0.000000] Memory: 2060116k/2087744k available (3939k kernel code, 27176k reserved, 1535k data, 532k init, 1178440k highmem)
    [ 0.000000] virtual kernel memory layout:
    fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc0659000 - 0xc06de000 ( 532 kB)
    .data : 0xc04d8ff2 - 0xc0658f80 (1535 kB)
    .text : 0xc0100000 - 0xc04d8ff2 (3939 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
    [ 0.000000] NR_IRQS:2304 nr_irqs:512 16
    [ 0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 1662.621 MHz processor
    [ 0.003335] Calibrating delay loop (skipped), value calculated using timer frequency.. 3326.79 BogoMIPS (lpj=5542070)
    [ 0.003340] pid_max: default: 32768 minimum: 301
    [ 0.003381] Security Framework initialized
    [ 0.003387] AppArmor: AppArmor disabled by boot time parameter
    [ 0.003409] Mount-cache hash table entries: 512
    [ 0.003722] Initializing cgroup subsys cpuacct
    [ 0.003725] Initializing cgroup subsys devices
    [ 0.003728] Initializing cgroup subsys freezer
    [ 0.003730] Initializing cgroup subsys net_cls
    [ 0.003733] Initializing cgroup subsys blkio
    [ 0.003766] Disabled fast string operations
    [ 0.003772] CPU: Physical Processor ID: 0
    [ 0.003774] CPU: Processor Core ID: 0
    [ 0.003777] mce: CPU supports 6 MCE banks
    [ 0.003788] CPU0: Thermal monitoring enabled (TM2)
    [ 0.003792] process: using mwait in idle threads
    [ 0.003803] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
    Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8
    tlb_flushall_shift is 0x6
    [ 0.007811] ACPI: Core revision 20120711
    [ 0.020011] ftrace: allocating 17289 entries in 34 pages
    [ 0.030073] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.030544] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.065739] smpboot: CPU0: Intel(R) Core(TM) Duo CPU L2400 @ 1.66GHz stepping 0c
    [ 0.066662] Performance Events: Core events, core PMU driver.
    [ 0.066662] ... version: 1
    [ 0.066662] ... bit width: 40
    [ 0.066662] ... generic registers: 2
    [ 0.066662] ... value mask: 000000ffffffffff
    [ 0.066662] ... max period: 000000007fffffff
    [ 0.066662] ... fixed-purpose events: 0
    [ 0.066662] ... event mask: 0000000000000003
    [ 0.090070] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.103341] CPU 1 irqstacks, hard=f60b8000 soft=f60ba000
    [ 0.103344] smpboot: Booting Node 0, Processors #1 OK
    [ 0.006666] Initializing CPU#1
    [ 0.006666] Disabled fast string operations
    [ 0.116462] TSC synchronization [CPU#0 -> CPU#1]:
    [ 0.116467] Measured 527230 cycles TSC warp between CPUs, turning off TSC clock.
    [ 0.116470] tsc: Marking TSC unstable due to check_tsc_sync_source failed
    [ 0.116510] Brought up 2 CPUs
    [ 0.116510] smpboot: Total of 2 processors activated (6653.58 BogoMIPS)
    [ 0.118215] devtmpfs: initialized
    [ 0.118215] PM: Registering ACPI NVS region [mem 0x7f6df000-0x7f6fffff] (135168 bytes)
    [ 0.118215] NET: Registered protocol family 16
    [ 0.118215] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.118215] ACPI: bus type pci registered
    [ 0.118215] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [ 0.118215] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
    [ 0.118215] PCI: Using MMCONFIG for extended config space
    [ 0.118215] PCI: Using configuration type 1 for base access
    [ 0.120035] bio: create slab <bio-0> at 0
    [ 0.120066] ACPI: Added _OSI(Module Device)
    [ 0.120066] ACPI: Added _OSI(Processor Device)
    [ 0.120066] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.120066] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.121079] ACPI: EC: EC description table is found, configuring boot EC
    [ 0.137147] ACPI: SSDT 7f6f1d26 00240 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
    [ 0.137827] ACPI: Dynamic OEM Table Load:
    [ 0.137831] ACPI: SSDT (null) 00240 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
    [ 0.138031] ACPI: SSDT 7f6f1feb 0065A (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
    [ 0.138742] ACPI: Dynamic OEM Table Load:
    [ 0.138746] ACPI: SSDT (null) 0065A (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
    [ 0.138765] ACPI: SSDT 7f6f1c5e 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
    [ 0.138765] ACPI: Dynamic OEM Table Load:
    [ 0.138765] ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
    [ 0.138765] ACPI: SSDT 7f6f1f66 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
    [ 0.138765] ACPI: Dynamic OEM Table Load:
    [ 0.138765] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
    [ 0.140232] ACPI: Interpreter enabled
    [ 0.140241] ACPI: (supports S0 S3 S4 S5)
    [ 0.140264] ACPI: Using IOAPIC for interrupt routing
    [ 0.144225] ACPI: Power Resource [PUBS] (on)
    [ 0.150588] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
    [ 0.151210] ACPI: ACPI Dock Station Driver: 4 docks/bays found
    [ 0.151210] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.151459] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.151500] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
    [ 0.151549] PCI host bridge to bus 0000:00
    [ 0.151555] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
    [ 0.151558] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.151562] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.151566] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.151569] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.151573] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.151576] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.151580] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
    [ 0.151594] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
    [ 0.151650] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
    [ 0.151665] pci 0000:00:02.0: reg 10: [mem 0xee100000-0xee17ffff]
    [ 0.151674] pci 0000:00:02.0: reg 14: [io 0x1800-0x1807]
    [ 0.151682] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
    [ 0.151690] pci 0000:00:02.0: reg 1c: [mem 0xee200000-0xee23ffff]
    [ 0.151738] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
    [ 0.151750] pci 0000:00:02.1: reg 10: [mem 0xee180000-0xee1fffff]
    [ 0.153358] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
    [ 0.153383] pci 0000:00:1b.0: reg 10: [mem 0xee240000-0xee243fff 64bit]
    [ 0.153490] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.153525] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
    [ 0.153638] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.153676] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
    [ 0.153789] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.153831] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
    [ 0.153944] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.153981] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
    [ 0.154095] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.154133] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
    [ 0.154191] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
    [ 0.154236] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
    [ 0.154293] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
    [ 0.154338] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
    [ 0.154396] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
    [ 0.154441] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
    [ 0.154499] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
    [ 0.154556] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
    [ 0.154582] pci 0000:00:1d.7: reg 10: [mem 0xee444000-0xee4443ff]
    [ 0.154690] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.154720] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [ 0.154823] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
    [ 0.154939] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
    [ 0.154947] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
    [ 0.154953] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
    [ 0.154958] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
    [ 0.154964] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
    [ 0.155030] pci 0000:00:1f.2: [8086:27c4] type 00 class 0x010180
    [ 0.155052] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
    [ 0.155066] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
    [ 0.155079] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
    [ 0.155092] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
    [ 0.155105] pci 0000:00:1f.2: reg 20: [io 0x18b0-0x18bf]
    [ 0.155164] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.155187] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
    [ 0.155262] pci 0000:00:1f.3: reg 20: [io 0x18e0-0x18ff]
    [ 0.155375] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
    [ 0.155475] pci 0000:02:00.0: [8086:109a] type 00 class 0x020000
    [ 0.155508] pci 0000:02:00.0: reg 10: [mem 0xee000000-0xee01ffff]
    [ 0.155551] pci 0000:02:00.0: reg 18: [io 0x2000-0x201f]
    [ 0.155736] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 0.160078] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.160084] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.160091] pci 0000:00:1c.0: bridge window [mem 0xee000000-0xee0fffff]
    [ 0.160159] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-ff]
    [ 0.160190] pci 0000:03:00.0: [168c:1014] type 00 class 0x020000
    [ 0.160224] pci 0000:03:00.0: reg 10: [mem 0xedf00000-0xedf0ffff 64bit]
    [ 0.166676] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 0.166683] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
    [ 0.166689] pci 0000:00:1c.1: bridge window [mem 0xec000000-0xedffffff]
    [ 0.166699] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff 64bit pref]
    [ 0.166761] pci_bus 0000:04: busn_res: [bus 04-0b] is inserted under [bus 00-ff]
    [ 0.166766] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
    [ 0.166772] pci 0000:00:1c.2: bridge window [io 0x5000-0x6fff]
    [ 0.166779] pci 0000:00:1c.2: bridge window [mem 0xe8000000-0xe9ffffff]
    [ 0.166788] pci 0000:00:1c.2: bridge window [mem 0xe4100000-0xe41fffff 64bit pref]
    [ 0.166850] pci_bus 0000:0c: busn_res: [bus 0c-13] is inserted under [bus 00-ff]
    [ 0.166855] pci 0000:00:1c.3: PCI bridge to [bus 0c-13]
    [ 0.166862] pci 0000:00:1c.3: bridge window [io 0x7000-0x8fff]
    [ 0.166868] pci 0000:00:1c.3: bridge window [mem 0xea000000-0xebffffff]
    [ 0.166877] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff 64bit pref]
    [ 0.166912] pci_bus 0000:15: busn_res: [bus 15-18] is inserted under [bus 00-ff]
    [ 0.166929] pci 0000:15:00.0: [1180:0476] type 02 class 0x060700
    [ 0.166955] pci 0000:15:00.0: reg 10: [mem 0xe4300000-0xe4300fff]
    [ 0.166994] pci 0000:15:00.0: supports D1 D2
    [ 0.166998] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.167024] pci 0000:15:00.1: [1180:0552] type 00 class 0x0c0010
    [ 0.167049] pci 0000:15:00.1: reg 10: [mem 0xe4301000-0xe43017ff]
    [ 0.167150] pci 0000:15:00.1: PME# supported from D0 D3hot D3cold
    [ 0.167176] pci 0000:15:00.2: [1180:0822] type 00 class 0x080500
    [ 0.167199] pci 0000:15:00.2: reg 10: [mem 0xe4301800-0xe43018ff]
    [ 0.167303] pci 0000:15:00.2: supports D1 D2
    [ 0.167307] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.167388] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
    [ 0.167395] pci 0000:00:1e.0: bridge window [io 0x9000-0xcfff]
    [ 0.167401] pci 0000:00:1e.0: bridge window [mem 0xe4300000-0xe7ffffff]
    [ 0.167410] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe3ffffff 64bit pref]
    [ 0.167414] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.167418] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.167421] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.167425] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [ 0.167428] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    [ 0.167432] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
    [ 0.167478] pci_bus 0000:16: busn_res: can not insert [bus 16-ff] under [bus 15-18] (conflicts with (null) [bus 15-18])
    [ 0.167485] pci_bus 0000:16: busn_res: [bus 16-ff] end is updated to 17
    [ 0.167488] pci_bus 0000:16: busn_res: [bus 16-17] is inserted under [bus 15-18]
    [ 0.167526] pci_bus 0000:00: on NUMA node 0
    [ 0.167531] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.167642] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
    [ 0.167684] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
    [ 0.167724] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
    [ 0.167771] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
    [ 0.167818] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
    [ 0.168141] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.168560] pci0000:00: ACPI _OSC control (0x1d) granted
    [ 0.173416] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.173512] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.173605] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.173698] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.173791] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.173884] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.173977] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.174070] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.174153] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.174153] vgaarb: loaded
    [ 0.174153] vgaarb: bridge control possible 0000:00:02.0
    [ 0.174153] PCI: Using ACPI for IRQ routing
    [ 0.176770] PCI: pci_cache_line_size set to 64 bytes
    [ 0.176881] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
    [ 0.176884] e820: reserve RAM buffer [mem 0x7f6d0000-0x7fffffff]
    [ 0.177040] NetLabel: Initializing
    [ 0.177042] NetLabel: domain hash size = 128
    [ 0.177044] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.177062] NetLabel: unlabeled traffic allowed by default
    [ 0.177096] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.177103] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.177110] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [ 0.193342] Switching to clocksource hpet
    [ 0.202830] pnp: PnP ACPI init
    [ 0.202861] ACPI: bus type pnp registered
    [ 0.203474] pnp 00:00: [mem 0x00000000-0x0009ffff]
    [ 0.203478] pnp 00:00: [mem 0x000c0000-0x000c3fff]
    [ 0.203481] pnp 00:00: [mem 0x000c4000-0x000c7fff]
    [ 0.203485] pnp 00:00: [mem 0x000c8000-0x000cbfff]
    [ 0.203488] pnp 00:00: [mem 0x000cc000-0x000cffff]
    [ 0.203491] pnp 00:00: [mem 0x000d0000-0x000d3fff]
    [ 0.203495] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled]
    [ 0.203498] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled]
    [ 0.203501] pnp 00:00: [mem 0x000dc000-0x000dffff]
    [ 0.203504] pnp 00:00: [mem 0x000e0000-0x000e3fff]
    [ 0.203508] pnp 00:00: [mem 0x000e4000-0x000e7fff]
    [ 0.203511] pnp 00:00: [mem 0x000e8000-0x000ebfff]
    [ 0.203514] pnp 00:00: [mem 0x000ec000-0x000effff]
    [ 0.203517] pnp 00:00: [mem 0x000f0000-0x000fffff]
    [ 0.203521] pnp 00:00: [mem 0x00100000-0x7fffffff]
    [ 0.203524] pnp 00:00: [mem 0xfec00000-0xffffffff]
    [ 0.203527] pnp 00:00: [mem 0xfed41000-0xfed40fff disabled]
    [ 0.203626] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.203631] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
    [ 0.203635] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
    [ 0.203639] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
    [ 0.203643] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
    [ 0.203647] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
    [ 0.203651] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
    [ 0.203655] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
    [ 0.203659] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
    [ 0.203663] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
    [ 0.203667] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
    [ 0.203671] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
    [ 0.203675] system 00:00: [mem 0x00100000-0x7fffffff] could not be reserved
    [ 0.203679] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
    [ 0.203685] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.203717] pnp 00:01: [bus 00-ff]
    [ 0.203721] pnp 00:01: [io 0x0cf8-0x0cff]
    [ 0.203725] pnp 00:01: [io 0x0000-0x0cf7 window]
    [ 0.203728] pnp 00:01: [io 0x0d00-0xffff window]
    [ 0.203732] pnp 00:01: [mem 0x000a0000-0x000bffff window]
    [ 0.203735] pnp 00:01: [mem 0x000c0000-0x000c3fff window]
    [ 0.203739] pnp 00:01: [mem 0x000c4000-0x000c7fff window]
    [ 0.203742] pnp 00:01: [mem 0x000c8000-0x000cbfff window]
    [ 0.203745] pnp 00:01: [mem 0x000cc000-0x000cffff window]
    [ 0.203749] pnp 00:01: [mem 0x000d0000-0x000d3fff window]
    [ 0.203752] pnp 00:01: [mem 0x000d4000-0x000d7fff window]
    [ 0.203755] pnp 00:01: [mem 0x000d8000-0x000dbfff window]
    [ 0.203759] pnp 00:01: [mem 0x000dc000-0x000dffff window]
    [ 0.203762] pnp 00:01: [mem 0x000e0000-0x000e3fff window]
    [ 0.203769] pnp 00:01: [mem 0x000e4000-0x000e7fff window]
    [ 0.203772] pnp 00:01: [mem 0x000e8000-0x000ebfff window]
    [ 0.203776] pnp 00:01: [mem 0x000ec000-0x000effff window]
    [ 0.203779] pnp 00:01: [mem 0x80000000-0xfebfffff window]
    [ 0.203783] pnp 00:01: [mem 0xfed40000-0xfed40fff window]
    [ 0.203856] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.203954] pnp 00:02: [io 0x0010-0x001f]
    [ 0.203958] pnp 00:02: [io 0x0090-0x009f]
    [ 0.203961] pnp 00:02: [io 0x0024-0x0025]
    [ 0.203964] pnp 00:02: [io 0x0028-0x0029]
    [ 0.203968] pnp 00:02: [io 0x002c-0x002d]
    [ 0.203971] pnp 00:02: [io 0x0030-0x0031]
    [ 0.203974] pnp 00:02: [io 0x0034-0x0035]
    [ 0.203977] pnp 00:02: [io 0x0038-0x0039]
    [ 0.203980] pnp 00:02: [io 0x003c-0x003d]
    [ 0.203983] pnp 00:02: [io 0x00a4-0x00a5]
    [ 0.203986] pnp 00:02: [io 0x00a8-0x00a9]
    [ 0.203989] pnp 00:02: [io 0x00ac-0x00ad]
    [ 0.203992] pnp 00:02: [io 0x00b0-0x00b5]
    [ 0.203996] pnp 00:02: [io 0x00b8-0x00b9]
    [ 0.203999] pnp 00:02: [io 0x00bc-0x00bd]
    [ 0.204002] pnp 00:02: [io 0x0050-0x0053]
    [ 0.204005] pnp 00:02: [io 0x0072-0x0077]
    [ 0.204008] pnp 00:02: [io 0x164e-0x164f]
    [ 0.204011] pnp 00:02: [io 0x002e-0x002f]
    [ 0.204014] pnp 00:02: [io 0x1000-0x107f]
    [ 0.204018] pnp 00:02: [io 0x1180-0x11bf]
    [ 0.204021] pnp 00:02: [io 0x0800-0x080f]
    [ 0.204024] pnp 00:02: [io 0x15e0-0x15ef]
    [ 0.204027] pnp 00:02: [io 0x1600-0x165f]
    [ 0.204030] pnp 00:02: [mem 0xf0000000-0xf3ffffff]
    [ 0.204034] pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
    [ 0.204037] pnp 00:02: [mem 0xfed14000-0xfed17fff]
    [ 0.204040] pnp 00:02: [mem 0xfed18000-0xfed18fff]
    [ 0.204044] pnp 00:02: [mem 0xfed19000-0xfed19fff]
    [ 0.204047] pnp 00:02: [mem 0xfed40000-0xfed40fff]
    [ 0.204158] system 00:02: [io 0x164e-0x164f] has been reserved
    [ 0.204162] system 00:02: [io 0x1000-0x107f] has been reserved
    [ 0.204166] system 00:02: [io 0x1180-0x11bf] has been reserved
    [ 0.204170] system 00:02: [io 0x0800-0x080f] has been reserved
    [ 0.204174] system 00:02: [io 0x15e0-0x15ef] has been reserved
    [ 0.204178] system 00:02: [io 0x1600-0x165f] could not be reserved
    [ 0.204183] system 00:02: [mem 0xf0000000-0xf3ffffff] has been reserved
    [ 0.204187] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.204191] system 00:02: [mem 0xfed14000-0xfed17fff] has been reserved
    [ 0.204195] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.204200] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.204204] system 00:02: [mem 0xfed40000-0xfed40fff] has been reserved
    [ 0.204210] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.204257] pnp 00:03: [mem 0xfed00000-0xfed003ff]
    [ 0.204297] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.204310] pnp 00:04: [io 0x0000-0x000f]
    [ 0.204314] pnp 00:04: [io 0x0080-0x008f]
    [ 0.204317] pnp 00:04: [io 0x00c0-0x00df]
    [ 0.204320] pnp 00:04: [dma 4]
    [ 0.204359] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.204371] pnp 00:05: [io 0x0061]
    [ 0.204415] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.204430] pnp 00:06: [io 0x00f0]
    [ 0.204445] pnp 00:06: [irq 13]
    [ 0.204485] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.204498] pnp 00:07: [io 0x0070-0x0071]
    [ 0.204505] pnp 00:07: [irq 8]
    [ 0.204546] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.204559] pnp 00:08: [io 0x0060]
    [ 0.204562] pnp 00:08: [io 0x0064]
    [ 0.204569] pnp 00:08: [irq 1]
    [ 0.204613] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.204629] pnp 00:09: [irq 12]
    [ 0.204672] pnp 00:09: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active)
    [ 0.204819] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (disabled)
    [ 0.204951] pnp 00:0b: Plug and Play ACPI device, IDs PNP0400 (disabled)
    [ 0.205120] pnp 00:0c: Plug and Play ACPI device, IDs IBM0071 PNP0511 (disabled)
    [ 0.206014] pnp: PnP ACPI: found 13 devices
    [ 0.206017] ACPI: ACPI bus type pnp unregistered
    [ 0.244152] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    [ 0.244204] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.244213] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
    [ 0.244218] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.244224] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.244231] pci 0000:00:1c.0: bridge window [mem 0xee000000-0xee0fffff]
    [ 0.244238] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref]
    [ 0.244247] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 0.244252] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
    [ 0.244260] pci 0000:00:1c.1: bridge window [mem 0xec000000-0xedffffff]
    [ 0.244266] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff 64bit pref]
    [ 0.244275] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
    [ 0.244280] pci 0000:00:1c.2: bridge window [io 0x5000-0x6fff]
    [ 0.244288] pci 0000:00:1c.2: bridge window [mem 0xe8000000-0xe9ffffff]
    [ 0.244294] pci 0000:00:1c.2: bridge window [mem 0xe4100000-0xe41fffff 64bit pref]
    [ 0.244303] pci 0000:00:1c.3: PCI bridge to [bus 0c-13]
    [ 0.244308] pci 0000:00:1c.3: bridge window [io 0x7000-0x8fff]
    [ 0.244316] pci 0000:00:1c.3: bridge window [mem 0xea000000-0xebffffff]
    [ 0.244322] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff 64bit pref]
    [ 0.244334] pci 0000:15:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
    [ 0.244338] pci 0000:15:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
    [ 0.244342] pci 0000:15:00.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    [ 0.244346] pci 0000:15:00.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    [ 0.244350] pci 0000:15:00.0: BAR 15: assigned [mem 0xe0000000-0xe3ffffff pref]
    [ 0.244355] pci 0000:15:00.0: BAR 16: assigned [mem 0x84000000-0x87ffffff]
    [ 0.244359] pci 0000:15:00.0: BAR 13: assigned [io 0x9000-0x90ff]
    [ 0.244363] pci 0000:15:00.0: BAR 14: assigned [io 0x9400-0x94ff]
    [ 0.244367] pci 0000:15:00.0: CardBus bridge to [bus 16-17]
    [ 0.244371] pci 0000:15:00.0: bridge window [io 0x9000-0x90ff]
    [ 0.244377] pci 0000:15:00.0: bridge window [io 0x9400-0x94ff]
    [ 0.244383] pci 0000:15:00.0: bridge window [mem 0xe0000000-0xe3ffffff pref]
    [ 0.244389] pci 0000:15:00.0: bridge window [mem 0x84000000-0x87ffffff]
    [ 0.244396] pci 0000:00:1e.0: PCI bridge to [bus 15-18]
    [ 0.244401] pci 0000:00:1e.0: bridge window [io 0x9000-0xcfff]
    [ 0.244408] pci 0000:00:1e.0: bridge window [mem 0xe4300000-0xe7ffffff]
    [ 0.244415] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe3ffffff 64bit pref]
    [ 0.244474] pci 0000:00:1e.0: enabling device (0005 -> 0007)
    [ 0.244482] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.244501] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.244504] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.244508] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.244511] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
    [ 0.244514] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
    [ 0.244518] pci_bus 0000:00: resource 9 [mem 0x80000000-0xfebfffff]
    [ 0.244522] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.244525] pci_bus 0000:02: resource 1 [mem 0xee000000-0xee0fffff]
    [ 0.244529] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
    [ 0.244532] pci_bus 0000:03: resource 0 [io 0x3000-0x4fff]
    [ 0.244536] pci_bus 0000:03: resource 1 [mem 0xec000000-0xedffffff]
    [ 0.244540] pci_bus 0000:03: resource 2 [mem 0xe4000000-0xe40fffff 64bit pref]
    [ 0.244543] pci_bus 0000:04: resource 0 [io 0x5000-0x6fff]
    [ 0.244547] pci_bus 0000:04: resource 1 [mem 0xe8000000-0xe9ffffff]
    [ 0.244550] pci_bus 0000:04: resource 2 [mem 0xe4100000-0xe41fffff 64bit pref]
    [ 0.244554] pci_bus 0000:0c: resource 0 [io 0x7000-0x8fff]
    [ 0.244557] pci_bus 0000:0c: resource 1 [mem 0xea000000-0xebffffff]
    [ 0.244561] pci_bus 0000:0c: resource 2 [mem 0xe4200000-0xe42fffff 64bit pref]
    [ 0.244564] pci_bus 0000:15: resource 0 [io 0x9000-0xcfff]
    [ 0.244568] pci_bus 0000:15: resource 1 [mem 0xe4300000-0xe7ffffff]
    [ 0.244572] pci_bus 0000:15: resource 2 [mem 0xe0000000-0xe3ffffff 64bit pref]
    [ 0.244575] pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7]
    [ 0.244578] pci_bus 0000:15: resource 5 [io 0x0d00-0xffff]
    [ 0.244582] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.244585] pci_bus 0000:15: resource 7 [mem 0x000d4000-0x000d7fff]
    [ 0.244589] pci_bus 0000:15: resource 8 [mem 0x000d8000-0x000dbfff]
    [ 0.244592] pci_bus 0000:15: resource 9 [mem 0x80000000-0xfebfffff]
    [ 0.244596] pci_bus 0000:16: resource 0 [io 0x9000-0x90ff]
    [ 0.244599] pci_bus 0000:16: resource 1 [io 0x9400-0x94ff]
    [ 0.244603] pci_bus 0000:16: resource 2 [mem 0xe0000000-0xe3ffffff pref]
    [ 0.244606] pci_bus 0000:16: resource 3 [mem 0x84000000-0x87ffffff]
    [ 0.244654] NET: Registered protocol family 2
    [ 0.244870] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.245648] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.246032] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.246064] TCP: reno registered
    [ 0.246068] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.246079] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.246186] NET: Registered protocol family 1
    [ 0.246211] pci 0000:00:02.0: Boot video device
    [ 0.246246] pci 0000:00:1d.0: power state changed by ACPI to D0
    [ 0.246313] pci 0000:00:1d.2: power state changed by ACPI to D0
    [ 0.246432] PCI: CLS mismatch (64 != 32), using 64 bytes
    [ 0.246510] Unpacking initramfs...
    [ 0.343371] Freeing initrd memory: 2948k freed
    [ 0.345047] Simple Boot Flag at 0x35 set to 0x1
    [ 0.345220] apm: BIOS not found.
    [ 0.345590] audit: initializing netlink socket (disabled)
    [ 0.345613] type=2000 audit(1350565779.343:1): initialized
    [ 0.360319] bounce pool size: 64 pages
    [ 0.360336] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.362947] VFS: Disk quotas dquot_6.5.2
    [ 0.363023] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.363270] msgmni has been set to 1727
    [ 0.363612] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.363664] io scheduler noop registered
    [ 0.363667] io scheduler deadline registered
    [ 0.363679] io scheduler cfq registered (default)
    [ 0.363883] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [ 0.364080] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
    [ 0.364274] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
    [ 0.364469] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
    [ 0.364643] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 0.364647] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    [ 0.364653] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 0.364680] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
    [ 0.364683] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
    [ 0.364689] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
    [ 0.364715] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
    [ 0.364721] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
    [ 0.364747] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
    [ 0.364753] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
    [ 0.364898] intel_idle: does not run on family 6 model 14
    [ 0.364936] GHES: HEST is not enabled!
    [ 0.364955] isapnp: Scanning for PnP cards...
    [ 0.721955] isapnp: No Plug & Play device found
    [ 0.722029] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.722532] serial 00:0a: [io 0x03f8-0x03ff]
    [ 0.722605] serial 00:0a: [irq 4]
    [ 0.722938] serial 00:0a: activated
    [ 0.743734] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.744133] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    [ 0.752722] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.752766] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.752919] mousedev: PS/2 mouse device common for all mice
    [ 0.753016] rtc_cmos 00:07: RTC can wake from S4
    [ 0.753202] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
    [ 0.753237] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 0.753263] cpuidle: using governor ladder
    [ 0.753266] cpuidle: using governor menu
    [ 0.753419] drop_monitor: Initializing network drop monitor service
    [ 0.753557] TCP: cubic registered
    [ 0.753760] NET: Registered protocol family 10
    [ 0.754005] NET: Registered protocol family 17
    [ 0.754037] Key type dns_resolver registered
    [ 0.754232] Using IPI No-Shortcut mode
    [ 0.754391] PM: Hibernation image not present or could not be loaded.
    [ 0.754409] registered taskstats version 1
    [ 0.755066] rtc_cmos 00:07: setting system clock to 2012-10-18 13:09:40 UTC (1350565780)
    [ 0.755246] Freeing unused kernel memory: 532k freed
    [ 0.755574] Write protecting the kernel text: 3940k
    [ 0.755610] Write protecting the kernel read-only data: 1176k
    [ 0.757855] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.766785] systemd-udevd[42]: starting version 194
    [ 0.816138] ACPI: bus type usb registered
    [ 0.816184] usbcore: registered new interface driver usbfs
    [ 0.816202] usbcore: registered new interface driver hub
    [ 0.818130] usbcore: registered new device driver usb
    [ 0.819809] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.819871] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 0.819877] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 0.819887] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    [ 0.823207] SCSI subsystem initialized
    [ 0.823813] ehci_hcd 0000:00:1d.7: debug port 1
    [ 0.823825] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    [ 0.823853] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee444000
    [ 0.825386] uhci_hcd: USB Universal Host Controller Interface driver
    [ 0.826295] ACPI: bus type scsi registered
    [ 0.828011] libata version 3.00 loaded.
    [ 0.833623] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 0.833993] hub 1-0:1.0: USB hub found
    [ 0.834000] hub 1-0:1.0: 8 ports detected
    [ 0.834661] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 0.834667] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 0.834677] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 0.834728] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
    [ 0.835719] hub 2-0:1.0: USB hub found
    [ 0.835727] hub 2-0:1.0: 2 ports detected
    [ 0.835846] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 0.835851] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 0.835859] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    [ 0.835908] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
    [ 0.836142] hub 3-0:1.0: USB hub found
    [ 0.836148] hub 3-0:1.0: 2 ports detected
    [ 0.836260] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 0.836265] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 0.836272] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    [ 0.836314] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
    [ 0.836529] hub 4-0:1.0: USB hub found
    [ 0.836535] hub 4-0:1.0: 2 ports detected
    [ 0.836646] uhci_hcd 0000:00:1d.3: setting latency timer to 64
    [ 0.836651] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [ 0.836659] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    [ 0.836720] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
    [ 0.837288] hub 5-0:1.0: USB hub found
    [ 0.837294] hub 5-0:1.0: 2 ports detected
    [ 0.837501] ata_piix 0000:00:1f.2: version 2.13
    [ 0.837518] ata_piix 0000:00:1f.2: MAP [
    [ 0.837520] P0 P2 IDE IDE ]
    [ 0.990043] ata_piix 0000:00:1f.2: setting latency timer to 64
    [ 0.990564] scsi0 : ata_piix
    [ 0.990932] scsi1 : ata_piix
    [ 0.991202] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14
    [ 0.991205] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15
    [ 1.140030] usb 1-6: new high-speed USB device number 2 using ehci_hcd
    [ 1.150736] ata2.00: ATAPI: DVD-ROM UJDA775, DA03, max UDMA/33
    [ 1.151416] ata1.00: ATA-8: HITACHI HTS722010K9SA00, DC2ZC75A, max UDMA/133
    [ 1.151421] ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 1.163946] ata2.00: configured for UDMA/33
    [ 1.164071] ata1.00: configured for UDMA/133
    [ 1.164253] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS72201 DC2Z PQ: 0 ANSI: 5
    [ 1.178126] scsi 1:0:0:0: CD-ROM MATSHITA DVD-ROM UJDA775 DA03 PQ: 0 ANSI: 5
    [ 1.164562] ACPI: Invalid Power Resource to register!
    [ 1.178566] ACPI: Invalid Power Resource to register!
    [ 1.182312] sd 0:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB)
    [ 1.182385] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.182389] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.182421] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.206975] sda: sda1 sda2 sda3 sda4
    [ 1.207544] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.209920] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
    [ 1.209925] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.210342] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 1.264015] hub 1-6:1.0: USB hub found
    [ 1.264154] hub 1-6:1.0: 4 ports detected
    [ 1.596700] usb 5-2: new full-speed USB device number 2 using uhci_hcd
    [ 1.635381] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [ 1.963410] usb 1-6.1: new high-speed USB device number 4 using ehci_hcd
    [ 2.060708] hub 1-6.1:1.0: USB hub found
    [ 2.060779] hub 1-6.1:1.0: 4 ports detected
    [ 2.340162] usb 1-6.1.3: new full-speed USB device number 5 using ehci_hcd
    [ 2.520161] usb 1-6.1.4: new full-speed USB device number 6 using ehci_hcd
    [ 2.938256] systemd-udevd[137]: starting version 194
    [ 3.357151] ACPI: Requesting acpi_cpufreq
    [ 3.372454] ACPI: acpi_idle registered with cpuidle
    [ 3.526218] fuse init (API version 7.20)
    [ 3.704869] FS-Cache: Loaded
    [ 3.758416] RPC: Registered named UNIX socket transport module.
    [ 3.758420] RPC: Registered udp transport module.
    [ 3.758422] RPC: Registered tcp transport module.
    [ 3.758424] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 3.816566] FS-Cache: Netfs 'nfs' registered for caching
    [ 3.865161] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 3.865514] ACPI: Lid Switch [LID]
    [ 3.868532] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    [ 3.868540] ACPI: Sleep Button [SLPB]
    [ 3.869184] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 3.869191] ACPI: Power Button [PWRF]
    [ 3.870237] acpi device:02: registered as cooling_device2
    [ 3.870293] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    [ 3.870365] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
    [ 3.911351] NET: Registered protocol family 23
    [ 3.971349] ACPI: AC Adapter [AC] (on-line)
    [ 3.987220] ACPI: Battery Slot [BAT0] (battery present)
    [ 3.988310] thermal LNXTHERM:00: registered as thermal_zone0
    [ 3.988315] ACPI: Thermal Zone [THM0] (39 C)
    [ 3.990678] thermal LNXTHERM:01: registered as thermal_zone1
    [ 3.990683] ACPI: Thermal Zone [THM1] (40 C)
    [ 4.078721] Linux agpgart interface v0.103
    [ 4.121082] intel_rng: FWH not detected
    [ 4.156543] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20120711/utaddress-251)
    [ 4.156557] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 4.156565] ACPI Warning: 0x00001180-0x000011bf SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20120711/utaddress-251)
    [ 4.156575] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 4.156578] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 4.168300] nsc-ircc 00:0c: [io 0x02f8-0x02ff]
    [ 4.168409] nsc-ircc 00:0c: [irq 3]
    [ 4.168416] nsc-ircc 00:0c: [dma 1]
    [ 4.169064] nsc-ircc 00:0c: activated
    [ 4.169126] nsc-ircc, chip->init
    [ 4.169142] nsc-ircc, Found chip at base=0x164e
    [ 4.169183] nsc-ircc, driver loaded (Dag Brattli)
    [ 4.169550] IrDA: Registered device irda0
    [ 4.169555] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
    [ 4.169647] nsc-ircc, chip->init
    [ 4.169669] nsc-ircc, Found chip at base=0x02e
    [ 4.169710] nsc-ircc, driver loaded (Dag Brattli)
    [ 4.169724] nsc_ircc_open(), can't get iobase of 0x2f8
    [ 4.281381] e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
    [ 4.281389] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
    [ 4.281450] e1000e 0000:02:00.0: Disabling ASPM L0s L1
    [ 4.281639] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
    [ 4.281744] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X
    [ 4.288485] cfg80211: Calling CRDA to update world regulatory domain
    [ 4.352614] leds_ss4200: no LED devices found
    [ 4.364538] parport_pc 00:0b: [io 0x03bc-0x03be]
    [ 4.364625] parport_pc 00:0b: [irq 7]
    [ 4.365054] parport_pc 00:0b: activated
    [ 4.365059] parport_pc 00:0b: reported by Plug and Play ACPI
    [ 4.365117] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
    [ 4.371354] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
    [ 4.371436] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
    [ 4.372020] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
    [ 4.372693] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    [ 4.396917] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:16:d3:3b:ac:45
    [ 4.396923] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
    [ 4.397002] e1000e 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005302-003
    [ 4.491297] sdhci: Secure Digital Host Controller Interface driver
    [ 4.491304] sdhci: Copyright(c) Pierre Ossman
    [ 4.541025] ppdev: user-space parallel port driver
    [ 4.578786] iTCO_vendor_support: vendor-support=0
    [ 4.638121] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
    [ 4.686186] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:201c]
    [ 4.760660] Non-volatile memory driver v1.3
    [ 4.786377] psmouse serio1: hgpk: ID: 10 00 64
    [ 4.810789] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0c30, PCI irq 16
    [ 4.810796] yenta_cardbus 0000:15:00.0: Socket status: 30000006
    [ 4.810809] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x9000-0xcfff]
    [ 4.810815] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x9000-0xcfff:
    [ 4.812665] excluding 0x9000-0x90ff 0x9400-0x94ff
    [ 4.841676] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe4300000-0xe7ffffff]
    [ 4.841682] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe4300000-0xe7ffffff:
    [ 4.841686] excluding 0xe4300000-0xe46cffff
    [ 4.841702] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe3ffffff 64bit pref]
    [ 4.841706] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe3ffffff:
    [ 4.841721] excluding 0xe0000000-0xe3ffffff
    [ 4.871842] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 4.871894] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
    [ 4.872464] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 4.980183] firewire_ohci 0000:15:00.1: added OHCI v1.0 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
    [ 4.980529] sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 18)
    [ 4.981592] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
    [ 4.981604] sdhci-pci 0000:15:00.2: setting latency timer to 64
    [ 4.982622] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
    [ 4.982702] Registered led device: mmc0::
    [ 5.008762] mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
    [ 5.017713] ath5k 0000:03:00.0: registered as 'phy0'
    [ 5.037476] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
    [ 5.058323] thinkpad_acpi: ThinkPad ACPI Extras v0.24
    [ 5.058330] thinkpad_acpi: http://ibm-acpi.sf.net/
    [ 5.058334] thinkpad_acpi: ThinkPad BIOS 7BETD7WW (2.18 ), EC 7BHT40WW-1.13
    [ 5.058337] thinkpad_acpi: Lenovo ThinkPad X60s, model 17033WG
    [ 5.060804] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
    [ 5.061581] thinkpad_acpi: ACPI backlight control delay disabled
    [ 5.061786] thinkpad_acpi: radio switch found; radios are enabled
    [ 5.061823] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
    [ 5.061826] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
    [ 5.065579] Registered led device: tpacpi::thinklight
    [ 5.066198] Registered led device: tpacpi::power
    [ 5.066854] Registered led device: tpacpi::standby
    [ 5.067460] Registered led device: tpacpi::thinkvantage
    [ 5.069575] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
    [ 5.073307] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
    [ 5.078614] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
    [ 5.095400] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
    [ 5.117055] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
    [ 5.140000] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input6
    [ 5.151096] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
    [ 5.153224] microcode: CPU0 sig=0x6ec, pf=0x20, revision=0x54
    [ 5.164786] microcode: CPU1 sig=0x6ec, pf=0x20, revision=0x54
    [ 5.165320] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 5.207805] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
    [ 5.230590] [drm] Initialized drm 1.1.0 20060810
    [ 5.230609] hda_intel: probe_mask set to 0x1 for device 17aa:2010
    [ 5.230693] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [ 5.233890] usbcore: registered new interface driver usbhid
    [ 5.233893] usbhid: USB HID core driver
    [ 5.302730] input: Razer Razer Abyssus as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1/1-6.1.3/1-6.1.3:1.0/input/input7
    [ 5.305459] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
    [ 5.308922] hid-generic 0003:1532:001C.0001: input,hidraw0: USB HID v1.11 Mouse [Razer Razer Abyssus] on usb-0000:00:1d.7-6.1.3/input0
    [ 5.312138] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1/1-6.1.4/1-6.1.4:1.0/input/input9
    [ 5.315939] hid-generic 0003:046D:C318.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.7-6.1.4/input0
    [ 5.318601] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1/1-6.1.4/1-6.1.4:1.1/input/input10
    [ 5.321840] hid-generic 0003:046D:C318.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.7-6.1.4/input1
    [ 5.438593] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
    [ 5.440382] excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x377
    [ 5.441643] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
    [ 5.442231] excluding 0x3f0-0x3ff 0x4d0-0x4d7
    [ 5.442857] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
    [ 5.443951] clean.
    [ 5.444080] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
    [ 5.445209] clean.
    [ 5.445331] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
    [ 5.445342] excluding 0xc0000-0xd3fff 0xdc000-0xfffff
    [ 5.445474] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
    [ 5.445502] clean.
    [ 5.445617] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
    [ 5.445637] excluding 0x60000000-0x60ffffff
    [ 5.445762] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
    [ 5.446982] clean.
    [ 5.480269] firewire_core 0000:15:00.1: created device fw0: GUID 000ae4070008202a, S400
    [ 5.528492] i915 0000:00:02.0: setting latency timer to 64
    [ 5.530227] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 5.530232] [drm] Driver supports precise vblank timestamp query.
    [ 5.530309] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 5.665563] ath: EEPROM regdomain: 0x62
    [ 5.665569] ath: EEPROM indicates we should expect a direct regpair map
    [ 5.665575] ath: Country alpha2 being used: 00
    [ 5.665578] ath: Regpair used: 0x62
    [ 5.669776] [drm] initialized overlay support
    [ 5.724409] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [ 5.724970] Registered led device: ath5k-phy0::rx
    [ 5.725025] Registered led device: ath5k-phy0::tx
    [ 5.725049] ath5k: phy0: Atheros AR5414 chip found (MAC: 0xa3, PHY: 0x61)
    [ 5.831536] fbcon: inteldrmfb (fb0) is primary device
    [ 5.931289] Console: switching to colour frame buffer device 128x48
    [ 5.938186] fb0: inteldrmfb frame buffer device
    [ 5.938188] drm: registered panic notifier
    [ 5.938198] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 6.307315] device-mapper: uevent: version 1.0.3
    [ 6.307458] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: [email protected]
    [ 16.007070] EXT4-fs (sda3): re-mounted. Opts: (null)
    [ 16.104507] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
    [ 16.104954] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
    [ 16.106707] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
    [ 16.129381] Adding 265068k swap on /dev/sda2. Priority:-1 extents:1 across:265068k
    [ 17.726117] thinkpad_acpi: procfs hotkey enable/disable: access by process with PID 498
    [ 17.726122] ------------[ cut here ]------------
    [ 17.726140] WARNING: at drivers/platform/x86/thinkpad_acpi.c:3822 hotkey_enabledisable_warn+0x54/0x60 [thinkpad_acpi]()
    [ 17.726143] Hardware name: 17033WG
    [ 17.726145] thinkpad_acpi: hotkey enable/disable functionality has been removed from the driver. Hotkeys are always enabled.
    [ 17.726147] Modules linked in: aes_i586 ablk_helper cryptd aes_generic xts gf128mul dm_crypt dm_mod arc4 i915 i2c_algo_bit drm_kms_helper joydev snd_hda_codec_analog hid_generic snd_hda_intel usbhid drm microcode kvm_intel snd_hda_codec snd_pcm snd_page_alloc snd_hwdep thinkpad_acpi ath5k ath sdhci_pci firewire_ohci firewire_core iTCO_wdt pcmcia hid nvram kvm snd_timer snd yenta_socket pcmcia_rsrc serio_raw i2c_i801 psmouse iTCO_vendor_support ppdev mac80211 sdhci mmc_core crc_itu_t pcmcia_core intel_agp parport_pc soundcore cfg80211 evdev intel_gtt e1000e nsc_ircc lpc_ich parport rfkill i2c_core agpgart coretemp thermal battery ac irda crc_ccitt video button nfs lockd sunrpc fscache fuse cpufreq_conservative acpi_cpufreq mperf processor ext4 crc16 jbd2 mbcache sr_mod cdrom sd_mod pata_acpi ata_generic
    [ 17.726230] ata_piix libata uhci_hcd scsi_mod ehci_hcd usbcore usb_common
    [ 17.726240] Pid: 498, comm: rc.local Not tainted 3.6.2-1-ARCH #1
    [ 17.726243] Call Trace:
    [ 17.726252] [<c0139f22>] warn_slowpath_common+0x72/0xa0
    [ 17.726259] [<f857bca4>] ? hotkey_enabledisable_warn+0x54/0x60 [thinkpad_acpi]
    [ 17.726266] [<f857bca4>] ? hotkey_enabledisable_warn+0x54/0x60 [thinkpad_acpi]
    [ 17.726270] [<c0139ff3>] warn_slowpath_fmt+0x33/0x40
    [ 17.726276] [<f857bca4>] hotkey_enabledisable_warn+0x54/0x60 [thinkpad_acpi]
    [ 17.726283] [<f857bd21>] hotkey_write+0x71/0x1d0 [thinkpad_acpi]
    [ 17.726290] [<f857c0ce>] dispatch_proc_write+0x6e/0xb0 [thinkpad_acpi]
    [ 17.726296] [<f857c060>] ? dispatch_proc_open+0x20/0x20 [thinkpad_acpi]
    [ 17.726302] [<c0282703>] proc_reg_write+0x63/0x90
    [ 17.726306] [<c02826a0>] ? proc_reg_poll+0x90/0x90
    [ 17.726312] [<c0233b48>] vfs_write+0x88/0x160
    [ 17.726316] [<c02826a0>] ? proc_reg_poll+0x90/0x90
    [ 17.726320] [<c0233e3d>] sys_write+0x3d/0x80
    [ 17.726326] [<c04d7e1f>] sysenter_do_call+0x12/0x28
    [ 17.726329] ---[ end trace 3bac869c0496cae5 ]---
    [ 17.726334] thinkpad_acpi: setting the hotkey mask to 0xffffffff is likely not the best way to go about it
    [ 17.726336] thinkpad_acpi: please consider using the driver defaults, and refer to up-to-date thinkpad-acpi documentation
    [ 17.730165] thinkpad_acpi: asked for hotkey mask 0xffffffff, but firmware forced it to 0x00ffffff
    [ 21.087969] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D2
    [ 21.088892] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D2
    [ 21.175503] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
    [ 21.176385] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 21.212915] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 21.226766] e1000e 0000:02:00.0: eth0: Error reading PHY register
    [ 21.227634] e1000e 0000:02:00.0: eth0: Error reading PHY register
    [ 21.228495] e1000e 0000:02:00.0: eth0: Error reading PHY register
    [ 21.229355] e1000e 0000:02:00.0: eth0: Error reading PHY register
    [ 21.230243] e1000e 0000:02:00.0: eth0: Error reading PHY register
    [ 21.232686] e1000e 0000:02:00.0: eth0: Error reading PHY register
    [ 21.233594] e1000e 0000:02:00.0: eth0: Error reading PHY register
    [ 21.234705] e1000e 0000:02:00.0: eth0: Error reading PHY register
    [ 21.235571] e1000e 0000:02:00.0: eth0: Error reading PHY register
    [ 21.236432] e1000e 0000:02:00.0: eth0: Error reading PHY register
    [ 21.249538] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
    [ 21.249639] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 21.927013] e1000e 0000:02:00.0: eth0: Cannot change link characteristics when SoL/IDER is active.
    [ 21.930111] e1000e 0000:02:00.0: eth0: Cannot change link characteristics when SoL/IDER is active.
    [ 22.484883] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=360
    [ 22.523746] EXT4-fs (dm-0): re-mounted. Opts: data=ordered,commit

    You are not alone with issues related to the e1000e (but all they concluded was that reloading the module makes it work again):
    https://bbs.archlinux.org/viewtopic.php?id=145564
    It seems like this is more your issue:
    http://permalink.gmane.org/gmane.linux. … devel/8932
    But if none of those boot flags work for you, then there's not much you can do, and you'll have to write a script to reload the module each time after initial boot finishes I guess until the module gets fixed.
    Also, power management of the PCIe interface causes the e1000e to shut off after a while as well (lots of people on CentOS noticing this):
    http://serverfault.com/questions/226319 … ie-aspm-do
    So you can use that boot parameter to stop that from happening, if that becomes an issue for you as well.

Maybe you are looking for