[Lenovo IdeaPad S10-3t] Waking up from suspend not working properly

Question

Hi,
I'm having some issues with getting suspend to work on my S10-3t. I tried pm-utils and the s2ram script (with about any combination of options as my machine is not on the whitelist) and always get the same behaviour: Suspending seems to succeed but waking up takes about 5 minutes.
I tried using pm-suspend under ubuntu 10.10, works flawlessly out of the box, so it *can* be done.. somehow.
Apparently this was a kernel related issue in older versions of ubuntu too, I couldn't quite figure out how they fixed it though (https://bugs.launchpad.net/ubuntu/+sour … bug/598664).
I tailed the pm-suspend.log and kernel.log through one suspend/wake up cycle, here's the output:
pm-suspend.log:
bash-4.1$ date;sudo tail -f /var/log/pm-suspend.log
Sun Oct 24 20:27:47 CEST 2010
Password:
Running hook /usr/lib/pm-utils/sleep.d/01grub resume suspend:
/usr/lib/pm-utils/sleep.d/01grub resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:
/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:
/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
Sun Oct 24 20:25:36 CEST 2010: Finished.
tail: /var/log/pm-suspend.log: file truncated
Initial commandline parameters:
Sun Oct 24 20:29:08 CEST 2010: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux netarch.haselwarter.org 2.6.35-ARCH #1 SMP PREEMPT Wed Sep 29 07:17:20 UTC 2010 i686 Intel(R) Atom(TM) CPU N470 @ 1.83GHz GenuineIntel GNU/Linux
Module Size Used by
cpufreq_ondemand 6971 2
btusb 9745 0
hid_cando 2611 0
bluetooth 44753 1 btusb
rfkill 12854 1 bluetooth
usbhid 33564 0
hid 60400 2 hid_cando,usbhid
uvcvideo 53488 0
videodev 39124 1 uvcvideo
v4l1_compat 13562 2 uvcvideo,videodev
joydev 7503 0
snd_seq_dummy 1079 0
snd_seq_oss 25072 0
snd_seq_midi_event 4496 1 snd_seq_oss
snd_seq 41752 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 4369 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_hda_codec_conexant 26292 1
snd_pcm_oss 33662 0
i915 267072 2
snd_mixer_oss 14686 1 snd_pcm_oss
snd_hda_intel 19020 0
snd_hda_codec 67274 2 snd_hda_codec_conexant,snd_hda_intel
drm_kms_helper 22043 1 i915
drm 134132 3 i915,drm_kms_helper
snd_hwdep 4764 1 snd_hda_codec
snd_pcm 58308 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
lib80211_crypt_tkip 7521 0
uhci_hcd 19251 0
snd_timer 15423 2 snd_seq,snd_pcm
broadcom 5201 0
i2c_algo_bit 4407 1 i915
ehci_hcd 32860 0
snd 43283 11 snd_seq_oss,snd_seq,snd_seq_device,snd_hda_codec_conexant,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 5025 1 snd
video 15889 1 i915
wl 1943997 0
tg3 115656 0
usbcore 121737 6 btusb,usbhid,uvcvideo,uhci_hcd,ehci_hcd
output 1448 1 video
snd_page_alloc 5981 2 snd_hda_intel,snd_pcm
intel_agp 24510 2 i915
wmi 5962 0
battery 7879 0
i2c_i801 7426 0
ac 2329 0
i2c_core 15599 6 videodev,i915,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
psmouse 51529 0
evdev 6820 9
libphy 14543 2 broadcom,tg3
lib80211 3158 2 lib80211_crypt_tkip,wl
agpgart 23520 2 drm,intel_agp
sg 20932 0
thermal 9786 0
coretemp 4665 0
button 3746 1 i915
serio_raw 3566 0
acpi_cpufreq 5157 1
freq_table 1999 2 cpufreq_ondemand,acpi_cpufreq
processor 25126 3 acpi_cpufreq
mperf 979 1 acpi_cpufreq
rtc_cmos 7746 0
rtc_core 11831 1 rtc_cmos
rtc_lib 1494 1 rtc_core
ext4 282610 1
mbcache 4290 1 ext4
jbd2 58396 1 ext4
crc16 1053 1 ext4
sd_mod 26768 3
ahci 17813 0
libahci 16174 3 ahci
libata 140771 2 ahci,libahci
scsi_mod 105888 3 sg,sd_mod,libata
total used free shared buffers cached
Mem: 2053592 233156 1820436 0 24724 102332
-/+ buffers/cache: 106100 1947492
Swap: 1952764 0 1952764
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01laptop-mode suspend suspend:
/usr/lib/pm-utils/sleep.d/01laptop-mode suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend:
/usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend:
Having NetworkManager put all interaces to sleep...Done.
/usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/91wicd suspend suspend:
Unable to connect to wicd daemon - is it running?
/usr/lib/pm-utils/sleep.d/91wicd suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
Kernel modesetting video driver detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Sun Oct 24 20:29:10 CEST 2010: performing suspend
Switching from vt7 to vt1
fbcon fb0 state 1
fbcon fb0 state 0
switching back to vt7
Sun Oct 24 20:34:40 CEST 2010: Awake.
Sun Oct 24 20:34:40 CEST 2010: Running hooks for resume
Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend:
/usr/lib/pm-utils/sleep.d/99video resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend:
/usr/lib/pm-utils/sleep.d/95led resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/91wicd resume suspend:
Unable to connect to wicd daemon - is it running?
/usr/lib/pm-utils/sleep.d/91wicd resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend:
/usr/lib/pm-utils/sleep.d/90clock resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend:
Reloaded unloaded modules.
/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend:
Having NetworkManager wake interfaces back up...Done.
/usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/11netcfg resume suspend:
/usr/lib/pm-utils/sleep.d/11netcfg resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01laptop-mode resume suspend:
tail: /var/log/pm-suspend.log: file truncated
Laptop mode
tail: /var/log/pm-suspend.log: file truncated
enabled, not active
Error for wireless request "Set Power Management" (8B2C) :
SET failed on device eth0 ; Operation not supported.
tail: /var/log/pm-suspend.log: file truncated
Failed.
/usr/lib/pm-utils/sleep.d/01laptop-mode resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub resume suspend:
/usr/lib/pm-utils/sleep.d/01grub resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:
/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:
/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
Sun Oct 24 20:34:44 CEST 2010: Finished.
kernel.log:
bash-4.1$ sudo tail -f /var/log/kernel.log
Password:
Oct 24 20:27:15 netarch kernel: input: Cando Corporation Cando 10.1 Multi Touch Panel with Controller as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input9
Oct 24 20:27:15 netarch kernel: cando-touch 0003:2087:0A01.0001: input,hidraw0: USB HID v1.11 Device [Cando Corporation Cando 10.1 Multi Touch Panel with Controller] on usb-0000:00:1d.1-1/input0
Oct 24 20:27:15 netarch kernel: EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
Oct 24 20:27:15 netarch kernel: EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
Oct 24 20:27:15 netarch kernel: Adding 1952764k swap on /dev/sda2. Priority:-1 extents:1 across:1952764k
Oct 24 20:27:16 netarch kernel: tg3 0000:05:00.0: irq 45 for MSI/MSI-X
Oct 24 20:27:16 netarch kernel: tg3 0000:05:00.0: eth0: Link is down
Oct 24 20:27:17 netarch kernel: CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
Oct 24 20:27:18 netarch kernel: tg3 0000:05:00.0: eth0: Link is down
Oct 24 20:27:19 netarch kernel: WARNING! power/level is deprecated; use power/control instead
Oct 24 20:29:08 netarch kernel: CE: hpet increased min_delta_ns to 7500 nsec
Oct 24 20:29:08 netarch kernel: ata1.00: configured for UDMA/100
Oct 24 20:29:08 netarch kernel: ata1: EH complete
Oct 24 20:29:08 netarch kernel: EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
Oct 24 20:34:40 netarch kernel: PM: Syncing filesystems ... done.
Oct 24 20:34:40 netarch kernel: PM: Preparing system for mem sleep
Oct 24 20:34:40 netarch kernel: Freezing user space processes ... (elapsed 0.01 seconds) done.
Oct 24 20:34:40 netarch kernel: Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Oct 24 20:34:40 netarch kernel: PM: Entering mem sleep
Oct 24 20:34:40 netarch kernel: Suspending console(s) (use no_console_suspend to debug)
Oct 24 20:34:40 netarch kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Oct 24 20:34:40 netarch kernel: sd 0:0:0:0: [sda] Stopping disk
Oct 24 20:34:40 netarch kernel: wl 0000:07:00.0: PCI INT A disabled
Oct 24 20:34:40 netarch kernel: ehci_hcd 0000:00:1d.7: PCI INT A disabled
Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.3: PCI INT D disabled
Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.2: PCI INT C disabled
Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.1: PCI INT B disabled
Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.0: PCI INT A disabled
Oct 24 20:34:40 netarch kernel: tg3 0000:05:00.0: PME# enabled
Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
Oct 24 20:34:40 netarch kernel: HDA Intel 0000:00:1b.0: PCI INT A disabled
Oct 24 20:34:40 netarch kernel: ACPI handle has no context!
Oct 24 20:34:40 netarch kernel: PM: suspend of devices complete after 429.517 msecs
Oct 24 20:34:40 netarch kernel: PM: late suspend of devices complete after 13.649 msecs
Oct 24 20:34:40 netarch kernel: ACPI: Preparing to enter system sleep state S3
Oct 24 20:34:40 netarch kernel: PM: Saving platform NVS memory
Oct 24 20:34:40 netarch kernel: Disabling non-boot CPUs ...
Oct 24 20:34:40 netarch kernel: CPU 1 is now offline
Oct 24 20:34:40 netarch kernel: SMP alternatives: switching to UP code
Oct 24 20:34:40 netarch kernel: Extended CMOS year: 2000
Oct 24 20:34:40 netarch kernel: Back to C!
Oct 24 20:34:40 netarch kernel: PM: Restoring platform NVS memory
Oct 24 20:34:40 netarch kernel: CPU0: Thermal monitoring handled by SMI
Oct 24 20:34:40 netarch kernel: Extended CMOS year: 2000
Oct 24 20:34:40 netarch kernel: Enabling non-boot CPUs ...
Oct 24 20:34:40 netarch kernel: SMP alternatives: switching to SMP code
Oct 24 20:34:40 netarch kernel: Booting Node 0 Processor 1 APIC 0x1
Oct 24 20:34:40 netarch kernel: Initializing CPU#1
Oct 24 20:34:40 netarch kernel: CPU1 is up
Oct 24 20:34:40 netarch kernel: ACPI: Waking up from system sleep state S3
Oct 24 20:34:40 netarch kernel: ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20100428/evregion-474)
Oct 24 20:34:40 netarch kernel: ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.DSLD] (Node f7025600), AE_TIME
Oct 24 20:34:40 netarch kernel: ACPI Error (psparse-0537): Method parse/execution failed [\_WAK] (Node f7024768), AE_TIME
Oct 24 20:34:40 netarch kernel: ACPI Exception: AE_TIME, During Method _WAK (20100428/hwsleep-601)
Oct 24 20:34:40 netarch kernel: i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
Oct 24 20:34:40 netarch kernel: HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
Oct 24 20:34:40 netarch kernel: HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100102)
Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010b)
Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x80118001)
Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xf010f010)
Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020)
Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40207)
Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x80318021)
Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf020f020)
Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030)
Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
Oct 24 20:34:40 netarch kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
Oct 24 20:34:40 netarch kernel: pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
Oct 24 20:34:40 netarch kernel: pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
Oct 24 20:34:40 netarch kernel: ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a)
Oct 24 20:34:40 netarch kernel: ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
Oct 24 20:34:40 netarch kernel: tg3 0000:05:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
Oct 24 20:34:40 netarch kernel: tg3 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x40100506)
Oct 24 20:34:40 netarch kernel: wl 0000:07:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
Oct 24 20:34:40 netarch kernel: wl 0000:07:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0200004)
Oct 24 20:34:40 netarch kernel: wl 0000:07:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
Oct 24 20:34:40 netarch kernel: wl 0000:07:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100106)
Oct 24 20:34:40 netarch kernel: PM: early resume of devices complete after 2.675 msecs
Oct 24 20:34:40 netarch kernel: i915 0000:00:02.0: setting latency timer to 64
Oct 24 20:34:40 netarch kernel: HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Oct 24 20:34:40 netarch kernel: HDA Intel 0000:00:1b.0: setting latency timer to 64
Oct 24 20:34:40 netarch kernel: HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
Oct 24 20:34:40 netarch kernel: usb usb2: root hub lost power or was reset
Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
Oct 24 20:34:40 netarch kernel: usb usb3: root hub lost power or was reset
Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
Oct 24 20:34:40 netarch kernel: usb usb4: root hub lost power or was reset
Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
Oct 24 20:34:40 netarch kernel: uhci_hcd 0000:00:1d.3: setting latency timer to 64
Oct 24 20:34:40 netarch kernel: usb usb5: root hub lost power or was reset
Oct 24 20:34:40 netarch kernel: ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Oct 24 20:34:40 netarch kernel: ehci_hcd 0000:00:1d.7: setting latency timer to 64
Oct 24 20:34:40 netarch kernel: pci 0000:00:1e.0: setting latency timer to 64
Oct 24 20:34:40 netarch kernel: ahci 0000:00:1f.2: setting latency timer to 64
Oct 24 20:34:40 netarch kernel: pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
Oct 24 20:34:40 netarch kernel: tg3 0000:05:00.0: PME# disabled
Oct 24 20:34:40 netarch kernel: wl 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Oct 24 20:34:40 netarch kernel: wl 0000:07:00.0: setting latency timer to 64
Oct 24 20:34:40 netarch kernel: sd 0:0:0:0: [sda] Starting disk
Oct 24 20:34:40 netarch kernel: ata2: SATA link down (SStatus 0 SControl 300)
Oct 24 20:34:40 netarch kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 24 20:34:40 netarch kernel: usb 3-2: reset full speed USB device using uhci_hcd and address 3
Oct 24 20:34:40 netarch kernel: atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
Oct 24 20:34:40 netarch kernel: atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
Oct 24 20:34:40 netarch kernel: btusb 3-2:1.0: no reset_resume for driver btusb?
Oct 24 20:34:40 netarch kernel: btusb 3-2:1.1: no reset_resume for driver btusb?
Oct 24 20:34:40 netarch kernel: usb 1-8: reset high speed USB device using ehci_hcd and address 4
Oct 24 20:34:40 netarch kernel: ata1.00: configured for UDMA/100
Oct 24 20:34:40 netarch kernel: atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
Oct 24 20:34:40 netarch kernel: atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
Oct 24 20:34:40 netarch kernel: usb 3-1: reset full speed USB device using uhci_hcd and address 2
Oct 24 20:34:40 netarch kernel: atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
Oct 24 20:34:40 netarch kernel: atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
Oct 24 20:34:40 netarch kernel: PM: resume of devices complete after 996.313 msecs
Oct 24 20:34:40 netarch kernel: PM: Finishing wakeup.
Oct 24 20:34:40 netarch kernel: Restarting tasks ...
Oct 24 20:34:40 netarch kernel: atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
Oct 24 20:34:40 netarch kernel: atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
Oct 24 20:34:40 netarch kernel: done.
Oct 24 20:34:40 netarch kernel: video LNXVIDEO:00: Restoring backlight state
Oct 24 20:34:40 netarch kernel: atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
Oct 24 20:34:40 netarch kernel: atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
Oct 24 20:34:40 netarch kernel: atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
Oct 24 20:34:40 netarch kernel: atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
Oct 24 20:34:40 netarch kernel: tg3 0000:05:00.0: eth0: Link is down
Oct 24 20:34:41 netarch kernel: tg3 0000:05:00.0: eth0: Link is down
Oct 24 20:34:43 netarch kernel: ata1.00: configured for UDMA/100
Oct 24 20:34:43 netarch kernel: ata1: EH complete
Oct 24 20:34:44 netarch kernel: EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
dmesg:
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.35-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Wed Sep 29 07:17:20 UTC 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f5d0000 (usable)
BIOS-e820: 000000007f5d0000 - 000000007f5e0000 (ACPI data)
BIOS-e820: 000000007f5e0000 - 000000007f5e3000 (ACPI NVS)
BIOS-e820: 000000007f5e3000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI 2.5 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x7f5d0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask 080000000 write-back
1 base 07F600000 mask 0FFE00000 uncachable
2 base 07F800000 mask 0FF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000001000 (reserved)
modified: 0000000000001000 - 0000000000002000 (usable)
modified: 0000000000002000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009dc00 (usable)
modified: 000000000009dc00 - 00000000000a0000 (reserved)
modified: 00000000000d2000 - 00000000000d4000 (reserved)
modified: 00000000000dc000 - 00000000000e0000 (reserved)
modified: 00000000000e4000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000007f5d0000 (usable)
modified: 000000007f5d0000 - 000000007f5e0000 (ACPI data)
modified: 000000007f5e0000 - 000000007f5e3000 (ACPI NVS)
modified: 000000007f5e3000 - 0000000080000000 (reserved)
modified: 00000000e0000000 - 00000000f0000000 (reserved)
modified: 00000000fec00000 - 00000000fec10000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ff000000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 01800000
found SMP MP-table at [c00f7cb0] f7cb0
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 15000-1a000
RAMDISK: 37e2a000 - 37ff0000
Allocated new RAMDISK: 00100000 - 002c5f93
Move RAMDISK from 0000000037e2a000 - 0000000037feff92 to 00100000 - 002c5f92
ACPI: RSDP 000f7c80 00024 (v04 PTLTD )
ACPI: XSDT 7f5d72d4 00074 (v01 LENOVO CB-01 06040000 LTP 00000000)
ACPI: FACP 7f5dfc60 000F4 (v03 LENOVO CB-01 06040000 PTL 00000002)
ACPI: DSDT 7f5d846a 07782 (v01 LENOVO CB-01 06040000 MSFT 03000000)
ACPI: FACS 7f5e2fc0 00040
ACPI: TCPA 7f5dfd54 00032 (v01 Phoeni x 06040000 TL 00000000)
ACPI: MCFG 7f5dfd86 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
ACPI: HPET 7f5dfdc2 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
ACPI: APIC 7f5dfdfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: BOOT 7f5dfe62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SLIC 7f5dfe8a 00176 (v01 LENOVO CB-01 06040000 LTP 00000000)
ACPI: SSDT 7f5d78ca 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
ACPI: SSDT 7f5d7824 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
ACPI: SSDT 7f5d7348 004DC (v02 PmRef CpuPm 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
1149MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0007f5d0
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x00000002
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x0007f5d0
On node 0 totalpages: 521566
free_area_init_node: node 0, pgdat c1418ac0, node_mem_map c157b020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3950 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 2300 pages used for memmap
HighMem zone: 292054 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [16000 - 167ff]
PM: Registered nosave memory: 0000000000002000 - 0000000000010000
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c2800000 s34880 r0 d22464 u2097152
pcpu-alloc: s34880 r0 d22464 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517490
Kernel command line: BOOT_IMAGE=/boot/vmlinuz26 root=/dev/sda5
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 10433580 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Subtract (53 early reservations)
#1 [0000001000 - 0000002000] EX TRAMPOLINE
#2 [0001000000 - 0001572184] TEXT DATA BSS
#3 [0001573000 - 000157921c] BRK
#4 [00000f7cc0 - 0000100000] BIOS reserved
#5 [00000f7cb0 - 00000f7cc0] MP-table mpf
#6 [000009dc00 - 000009e071] BIOS reserved
#7 [000009e199 - 00000f7cb0] BIOS reserved
#8 [000009e071 - 000009e199] MP-table mpc
#9 [0000010000 - 0000011000] TRAMPOLINE
#10 [0000011000 - 0000015000] ACPI WAKEUP
#11 [0000015000 - 0000016000] PGTABLE
#12 [0000100000 - 00002c6000] NEW RAMDISK
#13 [000157a000 - 000157b000] BOOTMEM
#14 [000157b000 - 000256b000] BOOTMEM
#15 [00015721c0 - 00015721c4] BOOTMEM
#16 [0001572200 - 00015722c0] BOOTMEM
#17 [00015722c0 - 0001572314] BOOTMEM
#18 [000256b000 - 000256e000] BOOTMEM
#19 [0001572340 - 00015723ac] BOOTMEM
#20 [000256e000 - 0002574000] BOOTMEM
#21 [00015723c0 - 00015723e5] BOOTMEM
#22 [0001572400 - 0001572427] BOOTMEM
#23 [0001572440 - 0001572600] BOOTMEM
#24 [0001572600 - 0001572640] BOOTMEM
#25 [0001572640 - 0001572680] BOOTMEM
#26 [0001572680 - 00015726c0] BOOTMEM
#27 [00015726c0 - 0001572700] BOOTMEM
#28 [0001572700 - 0001572740] BOOTMEM
#29 [0001572740 - 0001572780] BOOTMEM
#30 [0001572780 - 00015727c0] BOOTMEM
#31 [00015727c0 - 0001572800] BOOTMEM
#32 [0001572800 - 0001572840] BOOTMEM
#33 [0001572840 - 0001572880] BOOTMEM
#34 [0001572880 - 00015728c0] BOOTMEM
#35 [00015728c0 - 0001572900] BOOTMEM
#36 [0001572900 - 0001572940] BOOTMEM
#37 [0001572940 - 0001572950] BOOTMEM
#38 [0001572980 - 0001572990] BOOTMEM
#39 [00015729c0 - 00015729ea] BOOTMEM
#40 [0001572a00 - 0001572a2a] BOOTMEM
#41 [0002800000 - 000280e000] BOOTMEM
#42 [0002a00000 - 0002a0e000] BOOTMEM
#43 [0001572a40 - 0001572a44] BOOTMEM
#44 [0001572a80 - 0001572a84] BOOTMEM
#45 [0001572ac0 - 0001572ac8] BOOTMEM
#46 [0001572b00 - 0001572b08] BOOTMEM
#47 [0001572b40 - 0001572be8] BOOTMEM
#48 [0001572c00 - 0001572c68] BOOTMEM
#49 [0002574000 - 0002578000] BOOTMEM
#50 [0002578000 - 00025f8000] BOOTMEM
#51 [00025f8000 - 0002638000] BOOTMEM
#52 [0002a0e000 - 000340142c] BOOTMEM
Initializing HighMem for node 0 (000377fe:0007f5d0)
Memory: 2051364k/2086720k available (2986k kernel code, 34900k reserved, 1238k data, 412k init, 1177416k highmem)
virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1421000 - 0xc1488000 ( 412 kB)
.data : 0xc12eaacc - 0xc1420340 (1238 kB)
.text : 0xc1000000 - 0xc12eaacc (2986 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:512
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1828.625 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3658.63 BogoMIPS (lpj=6095416)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
... version: 3
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20100428
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Atom(TM) CPU N470 @ 1.83GHz stepping 0a
Booting Node 0, Processors #1 Ok.
Initializing CPU#1
Brought up 2 CPUs
Total of 2 processors activated (7317.54 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-10] at [mem 0xe0000000-0xe10fffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe10fffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: SSDT 7f5d8193 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 7f5d7b29 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: SSDT 7f5d8396 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
ACPI: SSDT 7f5d810e 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701f390), AE_ALREADY_EXISTS
ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xf7ffffff]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xfdff]
pci 0000:00:02.0: reg 10: [mem 0xf0300000-0xf037ffff]
pci 0000:00:02.0: reg 14: [io 0x18e8-0x18ef]
pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
pci 0000:00:02.0: reg 1c: [mem 0xf0000000-0xf00fffff]
pci 0000:00:02.1: reg 10: [mem 0xf0380000-0xf03fffff]
pci 0000:00:1b.0: reg 10: [mem 0xf0400000-0xf0403fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
pci 0000:00:1d.7: reg 10: [mem 0xf0604000-0xf06043ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0x18e0-0x18e7]
pci 0000:00:1f.2: reg 14: [io 0x18d4-0x18d7]
pci 0000:00:1f.2: reg 18: [io 0x18d8-0x18df]
pci 0000:00:1f.2: reg 1c: [io 0x18d0-0x18d3]
pci 0000:00:1f.2: reg 20: [io 0x18c0-0x18cf]
pci 0000:00:1f.2: reg 24: [mem 0xf0604400-0xf06047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20: [io 0x18a0-0x18bf]
pci 0000:05:00.0: reg 10: [mem 0xf0100000-0xf010ffff 64bit]
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 05-05]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff]
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:07:00.0: reg 10: [mem 0xf0200000-0xf0203fff 64bit]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:07:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 07-07]
pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf02fffff]
pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 11-11] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x80000000-0xf7ffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xfdff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701f390), AE_ALREADY_EXISTS
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
HEST: Table is not found!
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 0000000000002000 - 000000000000ffff
reserve RAM buffer: 000000000009dc00 - 000000000009ffff
reserve RAM buffer: 000000007f5d0000 - 000000007fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io 0x0800-0x080f] has been reserved
system 00:01: [io 0x1000-0x107f] has been reserved
system 00:01: [io 0x1180-0x11bf] has been reserved
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0xfe00] has been reserved
system 00:01: [io 0x0700-0x070f] has been reserved
system 00:01: [io 0x164e-0x174c] has been reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:01: [mem 0xfef00000-0xfeffffff] has been reserved
pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:1c.0: PCI bridge to [bus 05-05]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff]
pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 07-07]
pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf02fffff]
pci 0000:00:1c.1: bridge window [mem 0x80200000-0x803fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 11-11]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: enabling device (0000 -> 0003)
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 6 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 9 [mem 0x80000000-0xf7ffffff]
pci_bus 0000:00: resource 10 [io 0x0d00-0xfdff]
pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:05: resource 1 [mem 0xf0100000-0xf01fffff]
pci_bus 0000:05: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:07: resource 1 [mem 0xf0200000-0xf02fffff]
pci_bus 0000:07: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
pci_bus 0000:11: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:11: resource 5 [mem 0x000a0000-0x000bffff]
pci_bus 0000:11: resource 6 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:11: resource 7 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:11: resource 8 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:11: resource 9 [mem 0x80000000-0xf7ffffff]
pci_bus 0000:11: resource 10 [io 0x0d00-0xfdff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1816k freed
Simple Boot Flag at 0x36 set to 0x1
apm: BIOS not found.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1287944823.419:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1710
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
ERST: Table is not found!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 412k freed
udev[38]: starting version 162
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
SCSI subsystem initialized
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604500 irq 42
ata2: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604580 irq 42
ata3: DUMMY
ata4: DUMMY
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: ST9250315AS, 0010LVM1, max UDMA/100
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0010 PQ: 0 ANSI: 5
ata2: SATA link down (SStatus 0 SControl 300)
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 sda5
sd 0:0:0:0: [sda] Attached SCSI disk
PM: Marking nosave pages: 0000000000002000 - 0000000000010000
PM: Marking nosave pages: 000000000009d000 - 0000000000100000
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
udev[734]: starting version 162
ACPI: acpi_idle registered with cpuidle
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
coretemp coretemp.0: Unable to read TjMax from CPU.
coretemp coretemp.0: Using relative temperature scale!
ACPI: Lid Switch [LID]
------------[ cut here ]------------
WARNING: at fs/proc/generic.c:583 proc_register+0xf8/0x1e0()
Hardware name: 20040M18
proc_dir_entry 'power/PWRB' already registered
Modules linked in: coretemp button(+) serio_raw acpi_cpufreq freq_table processor mperf rtc_cmos rtc_core rtc_lib ext4 mbcache jbd2 crc16 sd_mod ahci libahci libata scsi_mod
Pid: 1097, comm: modprobe Not tainted 2.6.35-ARCH #1
Call Trace:
[<c10439bd>] warn_slowpath_common+0x6d/0xa0
[<c113e648>] ? proc_register+0xf8/0x1e0
[<c113e648>] ? proc_register+0xf8/0x1e0
[<c1043a6e>] warn_slowpath_fmt+0x2e/0x30
[<c113e648>] proc_register+0xf8/0x1e0
[<c113eca3>] proc_mkdir_mode+0x33/0x50
[<c113eccf>] proc_mkdir+0xf/0x20
[<f82af453>] acpi_button_add+0x21b/0x387 [button]
[<c11cc665>] acpi_device_probe+0x3a/0xf4
[<c121eae7>] driver_probe_device+0x77/0x180
[<c121ec69>] __driver_attach+0x79/0x80
[<c121dcb3>] bus_for_each_dev+0x43/0x70
[<c121e839>] driver_attach+0x19/0x20
[<c121ebf0>] ? __driver_attach+0x0/0x80
[<c121e3ed>] bus_add_driver+0xbd/0x2e0
[<c11cc59b>] ? acpi_device_remove+0x0/0x90
[<c121ee65>] driver_register+0x65/0x110
[<c113eca3>] ? proc_mkdir_mode+0x33/0x50
[<c11ccd53>] acpi_bus_register_driver+0x3a/0x3c
[<f82b202b>] acpi_button_init+0x2b/0x4a [button]
[<c100120d>] do_one_initcall+0x2d/0x190
[<f82b2000>] ? acpi_button_init+0x0/0x4a [button]
[<c107892b>] sys_init_module+0x9b/0x1e0
[<c10f4f8f>] ? sys_close+0x6f/0xc0
[<c100379f>] sysenter_do_call+0x12/0x28
---[ end trace 475801f928d07a3d ]---
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:01/input/input3
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (60 C)
sd 0:0:0:0: Attached scsi generic sg0 type 0
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
Linux agpgart interface v0.103
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ACPI: AC Adapter [ACAD] (on-line)
wl: module license 'Mixed/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
ACPI: WMI: Mapper loaded
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
agpgart-intel 0000:00:00.0: detected 8188K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
tg3.c:v3.110 (April 9, 2010)
tg3 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
tg3 0000:05:00.0: setting latency timer to 64
wl 0000:07:00.0: enabling device (0104 -> 0106)
wl 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
wl 0000:07:00.0: setting latency timer to 64
ACPI: Battery Slot [BAT1] (battery present)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0604000
tg3 mdio bus: probed
tg3 0000:05:00.0: eth1: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address c8:0a:a9:3b:be:4d
tg3 0000:05:00.0: eth1: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=500:01)
tg3 0000:05:00.0: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:05:00.0: eth1: dma_rwctrl[76180000] dma_mask[64-bit]
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
lib80211_crypt: registered algorithm 'TKIP'
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
eth0: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.60.48.36
udev[757]: renamed network interface eth1 to eth1-eth0
udev[756]: renamed network interface eth0 to wlan0
udev[757]: renamed network interface eth1-eth0 to eth0
[drm] Initialized drm 1.1.0 20060810
HDA Intel 0000:00:1b.0: enabling device (0104 -> 0106)
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
usb 1-8: new high speed USB device using ehci_hcd and address 4
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 44 for MSI/MSI-X
[drm] set up 7M of stolen space
Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xa40000/0x4a0500
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
usb 3-1: new full speed USB device using uhci_hcd and address 2
[drm] initialized overlay support
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (04f2:b1a1)
input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
usb 3-2: new full speed USB device using uhci_hcd and address 3
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Console: switching to colour frame buffer device 128x37
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
Slow work thread pool: Starting up
Slow work thread pool: Ready
ACPI Warning: _BQC returned an invalid level (20100428/video-640)
acpi device:03: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
input: Cando Corporation Cando 10.1 Multi Touch Panel with Controller as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input9
cando-touch 0003:2087:0A01.0001: input,hidraw0: USB HID v1.11 Device [Cando Corporation Cando 10.1 Multi Touch Panel with Controller] on usb-0000:00:1d.1-1/input0
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
Adding 1952764k swap on /dev/sda2. Priority:-1 extents:1 across:1952764k
tg3 0000:05:00.0: irq 45 for MSI/MSI-X
tg3 0000:05:00.0: eth0: Link is down
CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
tg3 0000:05:00.0: eth0: Link is down
WARNING! power/level is deprecated; use power/control instead
CE: hpet increased min_delta_ns to 7500 nsec
ata1.00: configured for UDMA/100
ata1: EH complete
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
wl 0000:07:00.0: PCI INT A disabled
ehci_hcd 0000:00:1d.7: PCI INT A disabled
uhci_hcd 0000:00:1d.3: PCI INT D disabled
uhci_hcd 0000:00:1d.2: PCI INT C disabled
uhci_hcd 0000:00:1d.1: PCI INT B disabled
uhci_hcd 0000:00:1d.0: PCI INT A disabled
tg3 0000:05:00.0: PME# enabled
pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
HDA Intel 0000:00:1b.0: PCI INT A disabled
ACPI handle has no context!
PM: suspend of devices complete after 429.517 msecs
PM: late suspend of devices complete after 13.649 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
SMP alternatives: switching to UP code
Extended CMOS year: 2000
Back to C!
PM: Restoring platform NVS memory
CPU0: Thermal monitoring handled by SMI
Extended CMOS year: 2000
Enabling non-boot CPUs ...
SMP alternatives: switching to SMP code
Booting Node 0 Processor 1 APIC 0x1
Initializing CPU#1
CPU1 is up
ACPI: Waking up from system sleep state S3
ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20100428/evregion-474)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.DSLD] (Node f7025600), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed [\_WAK] (Node f7024768), AE_TIME
ACPI Exception: AE_TIME, During Method _WAK (20100428/hwsleep-601)
i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100102)
pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010b)
pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x80118001)
pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xf010f010)
pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020)
pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40207)
pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x80318021)
pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf020f020)
pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030)
pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a)
ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
tg3 0000:05:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
tg3 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x40100506)
wl 0000:07:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
wl 0000:07:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0200004)
wl 0000:07:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
wl 0000:07:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100106)
PM: early resume of devices complete after 2.675 msecs
i915 0000:00:02.0: setting latency timer to 64
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
usb usb2: root hub lost power or was reset
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
usb usb3: root hub lost power or was reset
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
usb usb4: root hub lost power or was reset
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
usb usb5: root hub lost power or was reset
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
ahci 0000:00:1f.2: setting latency timer to 64
pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
tg3 0000:05:00.0: PME# disabled
wl 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
wl 0000:07:00.0: setting latency timer to 64
sd 0:0:0:0: [sda] Starting disk
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
usb 3-2: reset full speed USB device using uhci_hcd and address 3
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
btusb 3-2:1.0: no reset_resume for driver btusb?
btusb 3-2:1.1: no reset_resume for driver btusb?
usb 1-8: reset high speed USB device using ehci_hcd and address 4
ata1.00: configured for UDMA/100
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
usb 3-1: reset full speed USB device using uhci_hcd and address 2
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
PM: resume of devices complete after 996.313 msecs
PM: Finishing wakeup.
Restarting tasks ...
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
done

Answer 1

korpenkraxar wrote:
Try this with a kernel 3.X version:
hpet=disable highres=off nohz=off
I have been trying to resolve the issue of suspend failing to resume on me Lenovo s10-3 (not the touch screen) for what seems an aeon.
A profound thank you to you all.
hpet=disable highres=off nohz=off
Works!
I now have no indication lights showing when the machine is suspended? But finally I can close the lid and reopen to resume - fantastic, this machine may finally see some more use.
I am running Linux Mint Debian Edition (LMDE) running Gnome 3 with 3 series kernels (presently liquorix 3.4.0-4.dmz.1-liquorix-686)