Page data not printed in smartform...

I have a smartform in which I want to print some data in the last page. So after the NEXT Page, I inserted the following nodes
1. Page node - LAST. Its next page is also set as LAST. The next page of NEXT page is also set as LAST.
2. Page window. window type - main window.
3. Program lines node. Here I fetch data from some tables a create an internal table with 2 columns of data. I am not able to debug this code during runtime and so I cannot confirm
if data is being fetched here !!! How to do that ??
4. Loop node - Here I loop thr the internal table populated in the program lines and store in a structure , say ST_TEMP.
5. Under loop node I have the TEXT node where I display the data as:
&ST_TEMP-COL1& &ST_TEMP-COL2&
Now the issue is data is not printed on this page. What could be wrong ? I tried inserting a hard break point in the program lines but control did not stop there.
Is there any way I can figure out what can be wrong ?
thnks

>
> Looks like the last page is not called !!! I can see data only on one page and it shows page 1 of 1.
>
> "make sure ST_TEMP is filled with data" how do I do this ?? My program line node has the data filled in the internal table it_temp and the loop node has the data transferred to st_temp for every row. How can I debug the program lines code ??
> > Have a break <username> in the program lines. and check it_temp has data in it.
> "use a command and call the last page at end of the loop on internal table"...how to do this ?
> > like program lines there is a "command line" do a little search on SDN for more info on how to use command lines for next page.
>

Similar Messages

SCRIPT: second page is not print but need spool number

Hi Friends,
I'm creating a script. It has only one page. if the line item is exceeds in main window then it automatically print the next page.
now my requirement isgiven below
I need to print the first page and the second page should not print. But i need seperate spool request for 2nd page. whenever the user wants second page at that time he use the 2nd page spool number to take the print.
is there any solution or alternative method?
Thanks in Advance.
Vallamuthu.M

Hmmm if i knew your exact requirement i would be able to propose something better i guess, since this seems a little weird to be honest.
E.G. having a own output type for your page 2.
Anyway, returning to what you asked. You opened your form using FM OPEN_FORM. and when you are ready you use CLOSE_FORM to close it again.
You could make use of END_FORM followed by START_FORM when page 2 is to be printed.
This will give you page 1 and page in seperate spools.
you could as well close your form and open it again with ITCPO-TDNEWID = 'X' inmstead of using end_form and start_form.
But still i highly doubt that complete scenario.

6210 all-in-one -- prints fine on Win 7, but right side of horizontal page will not print.

HP 6210 all-in-one installed now on Windows 7 and prints fine. However, with landscape pages, will not print the right 1.5 inches of any NEW page I prepare, but pages prepared before on XP print fine. I've tried all adjustments and it just doesn't make sense to me whta is going on. HELP!!

I actually solved the problem myself by installing still another replacement set of print heads.
Mary

HT4641 Im trying to print off my cv, page 1 prints off fine but page 2 does not, I'm using the selected template for curriculum vitae why does my page 2 not print?

Im trying to print off my cv, page 1 prints off fine but page 2 does not, I'm using the selected template for curriculum vitae why does my page 2 not print?

Hi @kots
I suspect your question would be better answered in the HP Enterprise Business Community, as your HP Printer is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP LaserJet M2727 Multifunction Printer series page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

I just updated to iOS7 and Pages will not print using AirPrint!

Like the title says, Pages will not print. It's just a Pages issue. I can print using AirPrint when I print things from Safari or photos stored on my iPad. I've tried rebooting my router, "forgetting" my wifi connection and hooking it up again, I've exited Pages completely (so it's not running in the background) numerous times...nothing is working.
Strangely, Pages finds my printer just fine and goes through the motions of printing. It will tell me the usual "connecting to printer", "preparing printer", "now printing"...but nothing happens with the printer. It's like the connection between Pages and the printer gets lost somewhere. Pages used to print just fine before I updated to iOS 7. Whether that's just a coincidence or not, who knows. Has anyone else had this issue and found a solution?

I Also have the exact same issue, did you manage to resolve the issue?

Third page is not comming in smartform print preview

Hi Gurus,
             I have designed the smart which has three pages first and third pages are constant so they
            dont have any main window but second page is variable so it has one main window
            but the problem is third page is not comming in print preview though I have given the next page
            as page3 in page2 and also I have tried to create command on page2 and assigned next page
            as page3 and there is no condition so why it is not showing the third page.
            please guide if it is possible and also let me know if not possible.
Thanks & Regards
Mani

Hi Mani
Page 1 : Next page-->Page 2
Page 2 : Next page --> Page 2 since it contains main window
after the main window create the command node
go to next page : page 3.
Page 3: Next page --> Blank.
Regards,
Sravanthi

Since upgrading to ver 8 headers and footers on printing web pages do not print; typing response is terrible, type 20-30 char before seeing them; my PC or Firefox 8?

If I do an end task on plugin_container using Windows task manager, the typing response problem seems to go away temporarily. However, the plugin_container process soon restarts itself and the typing issue returns. It has happened four or five times while typing this note. Sometimes I start typing and the display of characters typed does not appear or while typing an displaying what is typed normally all of a sudden stops being displayed and eventually is displayed all in a blast of characters.
When I try to print a web page, the header and footer info that I have selected show in the print preview but disappears when I print the page and does not print on the hard copy.
I believe that both of the above situations began when I upgraded to Firefox version 8.
I tried to search for problems like the above with Firefox but could find nothing.
I tried all of the above in IE and IE works as it has in the past.
Is this a Firefox issue with version 8 or is there something wrong with my PC all of a sudden?

Response to cor-el suggestions:
I tried what you suggested as far as checking the theme (it's "Default 8.0") and deleting the sessionstore files (there was one .js file, one -1.js file and one .bak file). I still have the same slow response problems (especially typing, it has gone dead on me for a short time twice while typing this replay so far, now a third time) and lost of headers and trailers and some data.
I did the suggested actions three times just to make sure that I was doing them correctly. On the first try, the sessionstore.js and sessionstore-1.js was more than twice the size of sessionstore.bak. Since doing what was suggested, the sessionstore.js and sessionstore.bak are, I believe, the same size. I did not write down their size is why I am not certain.
The printing problem appears to only be with one website which is an investment website which I would prefer not to document here. I print from this website each weekday and I have confirmed that the printing problem started when the upgrade to version 8.0 occurred.
I need a solution to this or I am going to either go back to IE (Ugh!) or find another browser. The typing delays are an extreme annoyance since I do lots on the Internet including a lot of emailing. The delays also involve the buttons to select functions within a website.
Is there a way to get back to the version previous to version 8.0?

When printing from the web, ie UPS or credit card processing services, pages will not print through firefox, WHY?

I have been using firefox for my web browser for years, and run some business applications through the internet, like shipping via UPS, and Charging credit cards. When having to print labels or receipts there was never an issue, until today. While trying to ship our largest order yet via UPS, the labels would not print, a label i presented in a pop up and should print. However, nothing from the firefox windows will print today. WHY? Stephen
PS, the shipment was the largest one to date by the way, and the most important, everything went smoothly up until Firefox.... What a drag.

You're right: most web pages do not use frames, so that option usually is not available.
I don't know why a page that printed just the main content before would change to printing with useless sidebars. Can you try the site in Firefox's Safe Mode and see whether it prints/previews correctly there?
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, try starting Firefox in Firefox
[http://support.mozilla.com/kb/Safe+Mode Safe Mode]. Be careful not to "reset" anything permanently if you didn't back up.
Does that fix it? If so, the difference usually is caused by one of your add-ons. You can restart the regular way and disable all non-essential add-ons here:
orange Firefox button ''or'' Tools menu > Add-ons
In particular, check the Extensions category.

Data not shown in smartform

Hi All
Firstly I'm sorry to post the question below wrong forumn, Second it is not the basic question as the General forum tell me,
I want to print DMBTRNET,DMBTRGROS,DMBTRTDS in smart forms whereas these data calculated in SE38 as shown below,
IF WA_BSEG-BSCHL = '31'.
   WA_BSEG1-DMBTRNET = WA_BSEG-DMBTR.
ELSEIF WA_BSEG-BSCHL = '40'.
   WA_BSEG1-DMBTRGROS = WA_BSEG-DMBTR.
ELSEIF WA_BSEG-BSCHL = '50'.
   WA_BSEG1-DMBTRTDS = WA_BSEG-DMBTR.
ELSE.
   WA_BSEG1-DMBTROTHER = WA_BSEG-DMBTR.
ENDIF.
WA_BSEG1-BSCHL = WA_BSEG-BSCHL.
If u identified that I m not suitable to asked any question in your forum then I am again sorry.
Thanks And Regards
sanjeev Goel

Hi,
If you are retrieving the above data in your print program (SE38), then you can use global variables and then pass those variables to smartform.
While displaying these you will have to create text elements and pass the above variables here in text element.
If you are not retrieving the above data in print program, then you can retrieve it in smartform as well using program lines and then pass the respective variables to respective text elements.
Hope its clear to you.
Thanks,
Archana

Pages will not print to Airprint from Ipad

I can print using AirPrint when I print things from Safari or photos stored on my iPad or from Numbers or an email attachment, but not from Pages. I've tried rebooting my router, "forgetting" my wifi connection and hooking it up again, I've exited Pages completely (so it's not running in the background) numerous times...nothing is working.
Strangely, Pages finds my printer just fine and goes through the motions of printing. It will tell me the usual "connecting to printer", "preparing printer", "now printing"...but nothing happens with the printer. It's like the connection between Pages and the printer gets lost somewhere. Pages used to print just fine before I updated to iOS 7. Whether that's just a coincidence or not, who knows. Has anyone else had this issue and found a solution?

I am certain, it finds the printer in Print Forte, but if I try to print an email I get the "no airprint printer found"

Printer does not print. Even the test page did not print. I put in a new cartridge.

Printer doesn't print.

adnerb wrote:
My printer does not print the computer screen says scanner failure. I have a HP Officejet 5610v All-in-One printer. The printer is connected with USB. The operating system is Windows Vista. Help!!
See the troubleshooting steps in this page.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Purchase Order Changes not printing in Smartform

Hi friends,
first time whenever i create PO smartform printing after if i change quantity and save smartform is not prinitng with the lastest changes?
please help me

thanks for your reply
first time when i create PO smartform is printted and also i ma bale to see in messages tab with green color entry..
after PO changing in ME22n there is no scond entry in messages tab and not printted.
i have maintained condition record, and i am able to create printout when i create a new PO.
but chnages its not happening please help.

Web-Pages can NOT print, although others-printing, i.e., e-mails, words are ALL OK

H
HP PC with Windows 7 that I just purchased recently.
Two Printers: Officejet F4480 and Photosmart C6380 All-in-one series do NOT print any of web-pages, although I can print any others sites, i.e., e-mails, word and all other sites.
I installed HP Smart Web-printing, however I love to print in normal printing method, ... File > Print.
Any help into this issue would be greatly appreciated.
Thanks,

Thnakyou for your reply - there's definitley no way the uni will change their standard format, and it's really not their fault anyway. I wanted to re-load Adobe 7 but can't find it anywhere on the Adobe website, and do not want to risk loading it from elsewhere!

New Page command not working in SMARTFORM

I have a text file in an internal table of type TSFTEXT. I'm passing this internal table to my smartform. The smart form has 1 page, 1 main windo and 1 text element. The text has a text type of "Dynamic Text" and a fieldname = <<internal table of type TSFTEXT>>. The start property = "New Paragraph".
In the internal table (TSFTEXT), i have a few NEW-PAGE commands. These seem to be ignored. How can I force the smartform to create a new page. Here is what the internal table looks like.
/ here is some text 1
/ here is some text 2
/ here is some text 3
/ here is some text 4
/ here is some text 5
/:NEW-PAGE
/ here is some text 6
/ here is some text 7
/ here is some text 8
/ here is some text 9
/ here is some text 10
Thank you,

As far as I know, NEW_PAGE is not applicable in smartforms. That only applies to Sapscripts. As you stated in your requirement, to have a new-page in smartform, try to adjust the height of the main window. Once the records on the internal table reaches the total height, then it will automatically create a new page...

Flash windows in web page do not print preview or print - works in IE

Specs:
Win XP Pro, SP3, Laptop and Win 7 Desktop
FF 3.6.10
IE8
Latest flash for IE and FF - 10.1.85.3 (previous 10.1 versions also issue)
I routinely use www.speedtest.net and www.speakeasy.net/speedtest to perform speed tests for troubleshooting issues. Both use Flash windows to show the Download/Upload speed test progress and final results.
In IE8, both ''print preview'' and ''print'' work and display/print the contents of the flash windows. In FF, everything displays/prints properly expect the content of the Flash windows - they are blank.
Apologize, as I imagine this has had to be reported in the past as I've seen posts via Google search going back many years, but could not find anything recent in FF help or forum. In addition, I assume this could be a Flash issue. However, if it is, it is not impacting IE. Regardless whether an FF or Adobe issue, I believe that Mozilla should head up and manage the repairs.

If you just need an image of the page (not the browser frame or full desktop), the FireShot extension will do that. I have been using FireShot for some time and am quite happy with the results. I just tested it on www.speedtest.net results on my XP system and it worked. With Fireshot, you can add notations and print or save the image (full screen or just visible area). Do not opt for the paid "Pro" version, just use the free version. If you use it, you may want to block outgoing connection to screenshot-program.com in your firewall; I do not know why it tries to make that contact with it each screen capture, but it works fine with the firewall blocking the outgoing connection.
FireShot: https://addons.mozilla.org/en-US/firefox/addon/5648/
 
You need to update your plugins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
* Adobe PDF Plug-In For Firefox and Netscape "9.3.4" (ver. 9.4.0.195, a security update, was released 2010-10-05)
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**Use Firefox to download and SAVE the installer to your hard drive from the link in the article below
#**On the Adobe page, un-check any extra items (i.e. Free McAfee® Security Scan Plus) then click Download button
#**If you see message just under tabs, DO NOT click the Allow button, instead click below that where it says "click here to download".
#**Click "Save to File"; save to your Desktop (so you can find it)
#**After download completes, close Firefox
#**Click the installer you just downloaded and allow the install to continue
#***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#**'''Download link and more information''': https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
#*After the installation, start Firefox and check your version again.

Page data not printed in smartform...

Similar Messages

Maybe you are looking for