Page overflow

Hi Gurus,
I have an requirement in smartform, wherein i have to print data in a tabular box .
I have tried this option:
a. I have created a template which consists of only vertical lines and i am having a loop inside it. hence the data is printing properly. But this doesnt work for multiple pages since template does not overflow
b. I have tried using Table Option but the vertical Lines print only till the data is present and not till the end of the Box.
Is there any solution?
Regards,
Navin Fernandes

You could append the internal table with blank lines till the end of box. this will be complicated.
Else you could, if possible, have another overlapping window which has only the lines as you want.
Since data flow is dynamic it can be tricky but think over both the solutions.

Similar Messages

  • Short Dump : Page Overflow

    Hi All,
    When i am executing a report on Production, i am getting short dump - "Page overflow".
    It's very urgent.
    Early response will be highly appreciated.
    Best regards,

    Can you provide more details?
    From what it looks like, i think your basis should increase the memory allocations for your internal tables.
    Regards,
    Ravi

  • Page overflow void reason in check printing

    In case of page overflow, the requirement is that first check is valid and the subsequent are void.
    I have it updated in the print but not able to make it updated in SAP that it is void due to page overflow. Please advise.
    Also, will it get automatically updated if the void checks are printed first and then the valid check.

    Hi,
    Check the The statement Update PAYR.  in the code at the place where it should be updating as a VOID Check. And U can find many reasons for the Void like
    Overflow of data in main window is one among them.
    Do please go through RFFOUS_C program and check for the update statement.
    <<Text removed by moderator>>
    Thanks
    Arif Shaik
    Edited by: Matt on Nov 12, 2008 9:12 AM - Do not request or offer points

  • Page overflow in check printing

    To suit the requirement I am calling PERFORM scheckinfo_speichern USING 2 (page overflow), the SAP is not updating the void reason. Please give any suggestions to correct thus

    Hi,
    Check the The statement Update PAYR.  in the code at the place where it should be updating as a VOID Check. And U can find many reasons for the Void like
    Overflow of data in main window is one among them.
    Do please go through RFFOUS_C program and check for the update statement.
    <<Text removed by moderator>>
    Thanks
    Arif Shaik
    Edited by: Matt on Nov 12, 2008 9:12 AM - Do not request or offer points

  • Page overflow: smartforms

    Gurus
    i am working on smartformsfor contarct data and printing some texts from contract details.
    the form is printing fine  if there are multiple lines in "header text". but when there is more data and page overflows, header text data truncates.
    i want this to automatically go to next ( new) page without truncating.  window type is secondary. i suppose it doesnt overflow, but i want to do it, i cannot put this to main window as there is one main window ( morever it didnt work this way as well).  i want the data to continue on new page if this overflows or at least i want this( entire window) to be printed in a new page if this overflows.
    Please help, tried a lot, but nothings working.
    regards
    kavana

    Hi all thanks for your responses.
    i did try folder node. it didnt help. when i checked page protection, nothing got printed even the half which used to get.
    i cannot put this in main window as it changes the order of appearence. i want this to be teh last one to be printed.
    i created one more page "last" and put thsi part there, but again, nothing got printed.
    seems liek its not goign for more 1 page or i dotn knwo what i am doing wrong.
    currently i have 2 pages. first page's next page is first and next page's next page is next.
    i have many windows, last 3 are, main window, total window and next is note window.
    in note window i write this header text. i cannot put this data in main window as total should follow the data after main window and thsi heaeder text shoudl be the last one.
    so plz help....  i am really not understanding this "next page" concept. is that soemthing to do with and also how to set varaible window in smartforms like sap scripts. here only main window seems working but in my case i am not able to make this main window as i already have one.
    i tried makign this main window, no error came, but nothing got printed even half which usually comes.
    plz help
    regards
    kavana

  • Error in SmartHeap - Page Overflows

    Hi,
    we are handling big clients for billing forms. Some of this clients have a lot of details. These details makes forms to over flow to many pages. What is happening? that when pages overflows to a lot of pages, and a lot could be more than 100 pages, this error beging to show up until we cancel the operation.
    Error in SmartHeap
    Code 2
    File Unknown
    Line 0
    Error in SmartHeap
    Code 2
    File Unknown
    Line 0
    Error in SmartHeap
    Code 2
    File Unknown
    Line 0
    +.+
    +.+
    +.+
    +.+
    +.+
    +.+
    Error in SmartHeap
    Code 2
    It seems to me that there are some limitation on page overflowing. what can we do about this huge clients details?
    this is in DOCUMAKER 11.5.p3

    Hi Andres,
    I am just curious, How are you so sure that it might be due to the overflowing? I mean does it give you any more error pop up which indicate that it is due to the overflow? I got this error too once and that was because i gave manual trigger to a fap and forgot to mention the condition in the search mask, please verify that you have the conditions specified on the triggers.

  • New page overflows window I must CTL+- to fix how to lock fix???

    When I open a new page in Foxfire the width of the page overflows my monitor. I must use Ctl+- to make the page narrower. I cannot find any way to set the page width as an option.

    Does this problem occur with every page, or specifically with your home page, or your "new tab" page?
    Firefox 22 adjusts the page zoom level according to your Windows settings, to better support high DPI displays. For example, when your Windows text size is set to 125%, Firefox zooms the content area 25%. (Ctrl+- twice takes it back down to 100%.)
    Sites that size themselves to fit without scroll bars may need to be updated to look right in Firefox 22. However, Firefox should remember your site-specific zoom settings, so it should only need to be a one-time adjustment per site.
    If you find yourself having to zoom out on lots of sites, you may want to use one of the following add-ons to set a new lower level of zoom by default:
    * [https://addons.mozilla.org/firefox/addon/default-fullzoom-level/ Default FullZoom Level]
    * [https://addons.mozilla.org/firefox/addon/nosquint/ NoSquint]
    This article has more information: [[Webpages are large and blurry after updating Firefox - how to fix]].

  • F-58  - Void reason code : 2 and Page overflow

    Hi,
    May i know what does it means by Page overflow in F-58.
    Thanks.
    Joo

    Hi,
    Type of Void Reason Code for the Print Program
    The user chooses void reason codes to select checks that can no longer be used for payment.
    Some void reason codes are reserved exclusively for the system: They are only used by the automatic print program. These void reason codes cannot be employed by the user.
    Example
    Trial printout, page overflow, and form summary section are used exclusively by the check print program. It is also possible to create so-called "zero net checks" (Functionality for USA and Canada).
    Here you can do cofig for void reasons in "FCHV"
    Hope understood and you can reward if you are cleared.
    Thanks,
    Vasu..

  • Problem in page overflow with table contents having control level

    Hello members,
    My scenario is to display table contents from (Master Page)MP1 and then overflow to MP2 and use the MP2 for the rest of the overflowed pages too. In the form context, the table has control level grouping on a field(F1), which is set in context, because of which we can sub total for the group of records based on field F1.
    Take the scenario that the content area(CA1) of MP1 fits only 10 records and content area(CA2) of MP2 fits only 20 records.
    Test scenario 1:
    If the table contents have records upto 20, then MP1 gets filled with first 10 records and then MP2 with rest of the 10 records. This scenario works fine.
    Test scenario 2:
    If the table contents have records upto 5, then only MP1  with current 5 records gets filled. This scenario also works fine.
    Test scenario 3:( ISSUE BEING FACED)
    If the table contents have records upto 50,(which are more than the combined number of rows of MP1 and MP2) then no data is displayed on MP1 and data starts filling in next MP2 and only approx 22 records are visible where few even cross the content area of the MP2. And no over flow for the rest of the records happen.
    We use SFP Transaction in SAP to modify the layouts of the forms. Please let us know if the table having group set by control level causes any issue in this scenarion Test scenario 3.
    Thanks
    Vivek
    [email protected]

    Hi,
    master pages don't support page breaks. Those pages are only used for the background things of body pages like page numbers, company logs or letter head layouts.
    Don't use repeating objects on masterpages that may overflow its content area, this will always end up with unexpected results.
    Put all those objects on a regular page (body page) which allows page breaks.

  • Dynamic tables on one page - overflow problem with repeating header/footer

    Hi,
    with the help of the user RADZMAR I was able to create dynamic tables..
    But now, I have got the next problem.
    2 different tables are placed on 1 page.Each of them should be dynamic.
    Please let me list what is working, and what not:
    each textfield should be expandable (-> working)
    Table 01 should be overflowing to page 02 (-> working)
    Table 02 should be overflowing to page 02 (->working)
    Table 02 should be scrolling to page 02 if tabele 01 is growing (->working)
    Table 01 and Table 02 should be splittable (->working)
    header 02 + the footer 02 ( from table 02) should be repeated on every page (->working)
    header 02 + the footer 02 ( from table 02) should not be stand alone, indepentenly on which page (-> NOT WORKING)
    In other words:
    How can I reach, that the header and the footer enclose at least ONE textfield-row ?
    The setting "keep with previous / following" did not helped me.
    If the text in table 02 is large, the settings "keep with..." cause some layout destructions.
    This is the screenshot of the problem:
    Here you can download my doc:
    https://acrobat.com/#d=V*HZAV8VILZarp6gF0B3nw
    Thanks and Greetings
    Nuri

    Your question was "... but the font on the footer is much larger than that of the template", yes?
    I only can repeat, look at the difference of:
    1. index.html (Font-size > medium) >
    2. Calendar.html (Font-size > no entry):
    > "... font on the footer is much larger than that of the template",
    Hans-Günter
    P.S.
    See us again - maybe - at Monday > we will do a nice little trip to Austria.

  • Query Related to TOP-OF-PAGE Overflow

    Hi All,
            I had a Different query,
    The selection screen input value we pass  we need to print on TOP-OF-PAGE...
    I did fine and when its get overflow like exceeding page its going to short dump...
    exp:/ i have 100 records.
    i am printing on top-of-page...
    it prints only 37 records...
    Can anyone guide me how to print the continous text
    Thanks and Regards,
    Krishna.

    Hi Friends,
    I have declared as...
    No standard page heading line-size 132 line-count 100.
    But it is printing upto max 37 lines...
    Its not taking more than a page
    Can any more tries....
    Thanks and Regards,
    Krishna.

  • PDF Adobe Cheque using Payment Medium Workbench- MICR, Page overflow issues

    Hi All,
    We developed a PDF Adobe form for CHEQUE assigned using Payment Medium Workbench CHECK format.
    The issues I am facing are
    1. MICR symbols(in transit, BSB...) not printing however the numerals 0 to 9 is printing in MICR font. (installed MICR font in ADS to design the form)
    2. The option of DO NOT VOID CHECKS for overflow/test prints is not available in PMW. As I thought of using prenumbered stationary because of MICR font issues, where I need to void the cheque if it overflows to the next page. Getting the form output is not an issue, however PAYR is not updated with void details. By default, PMW is not voiding cheques for overflow in the cheque register.
    3. Is there any option to assign PDF Cheque form by using RFFOUS_C payment medium program.
    Please let me know your comments if you have come across any of these issues.
    Thanks,
    Prabha

  • Page overflow in script

    Hi
    I am currently using program  RFFOUS_C for printing the check. it creating fine output.  but have issue.
    I am passing rem statement in my script. i am am creating only one page in the script. but when i generate spool it show two pages one with Main Window & the check & second window has all the secondary widow on the second page.
    Can any one tell me how can i print only page from the printer.
    Need Help ASAP.
    Thanks
    Amber.
    Edited by: Amber Raj Singh on Oct 2, 2009 5:48 AM

    hi 
    exact means ?
             like for A4 sheet size is 21.0*29.7 so u may defin any window , line with in this range .
       for max. utilization of page :
                 left margin 0.1 mm
                 upper margin 0.1 mm
                 width 20.9 cm
                 length 29.8 cm
    like this u can do as required.
    reward if help ful.

  • Error in displaying master page content in overflowing pages

    Hi All,
    I am having a master page with logo, bill to party address and item details. The logo and bill to party are in a separate sub form of the master page and the item details are in the design view of the page.
    My problem is when the item details overflow to next page, the logo and bill to party address are not appearing in the next page with the item details.
    Kindly help me to resolve this issue. I read many post telling the master page content will be repeated on all subsequent pages. Dont know why it fails for me . Am i missing something. Please help.
    Thanks and Regards,
    Vadivu

    Hi,
    My issue got resolved, i changed my master page overflow to the same master page. Its is displaying the details on the next page when items are over flowing.

  • AP Check: Overflow Checks (3rd Page)

    We are on EBS: 12.0.6
    Bi Publisher: 10.1.3.4.1
    We have followed Tim Dexter's Anatomy of a Template:
    1. Our AP Checks first page contains (In order) Lines per page 15:
    Supplier Address
    List of invoices the AP Check is for
    The actual Check (Check Stock)
    2. Our AP Checks second page (overflow) contains (In order) Lines per page 65:
    List of Invoices (Those list of invoices that didn't fit on page 1 (invoices count 16 and greater up to 65 (lines per page)).
    Total: Check total, Check Date, Check number.
    The checks work fine until the list of invoices paid by a single check goes OVER 65. When the overflow goes to a 3rd page all the checks below get shifted OFF and are then messed up in the pdf output. I have racked my brain trying to resolve this so I'm making an attempt to reach out to the community. I can't even nail down where the problem lies other than if I have a check for 66 invoices being paid, it seems that the recursive template (countdown) "seems" (but i don't know for sure) to try to put 64 blank spaces on the 3rd page before trying to print the remaining invoice info. Kind of hard to explain but if anyone prints large overflows in 12.0.6 AP Checks and you know what problem I'm facing I'd like to hear from you. We are following Tim Dexter's blog on anatomy of a template 1, 2, 3 for the heart of our template, just additional info for our companies checks.
    Thanks in advance,
    AG

    I guess there is a limitation on the number of invoices that can be paid by a single check. It has something to do with the payment document that you are using. Not very sure though!!

Maybe you are looking for