Pages 5.5 Tables Bug?

So I updated to Yosemite and upgraded iWork to the latest versions, which included Pages 5.5.  Upon opening several different documents which I had saved in the previous version of Pages (5.2.2), I found that the tables in these documents were not displaying in the same way as they used to.  The problem seemed to be that Pages 5.5 refuses to make a table that has too many rows for one page flow onto the next page.  It simply moves the entire table to the next page.
I did a few tests with a new document created in Pages 5.5 with the following results:
1st Test: Created a new document, adding text to cover half of the first page, then inserted a table underneath.  Increasing the number of rows to the point where the table no longer fits on page one causes the entire table to move to page 2.
2nd Test: With the same document as above, I increased the number of rows of the table until it could no longer fit on an entire page.  Pages correctly flowed the table from page two to page three.
3rd Test: With the same document as above, I deleted the text and whitespace on page one.  This forced the table back to page one, and Pages successfully flowed it to page two.  But now, adding any text above the table on page one causes a bizarre result: the table moves down and the rows which flowed onto page two display correctly, but the first part of the table is entirely invisible.  It isn't just a drawing problem, since zooming in and out does not help.  See screenshot below (notice the row numbers are in the 30s, proving that this is the second part of the table).
4th Test: I saved the document to iCloud Drive and then reopened it.  This results in absolutely nothing of the table being displayed, not even the second half.  I have not figured out any way to make the table display itself.  Opening this document on an iPad, Pages shows me the text on the first page, with the table flowing from page two to page three.
Anyone else noticing similar difficulties?  I have documents that I had created in native Pages 5.2.2 format that were able to flow a table from one page to the next, so this looks a lot like a bug introduced by the 5.5 update.
Sincerely,
Alexander Dominic

I think i found the reason for this behavior.
The tables are fine. It depends on a layout option that seems to be activated by default. In the inspector-panel is a "more…" There you can select the option "Avoid lonely lines" (dunno english term) When the section with the table is selected and you uncheck this feature everything is as expected.
Apple should change the defaults
See the screenshots attached.
Regards,
AW

Similar Messages

  • How do I get to the second page of a table of contents?

    I have purchased several books that are long enough that their interactive tables of contents require more than one page. I have not been able to figure out how to get to the second or subsequent pages of the table of contents. Tapping or swiping the right side of the page does not advance the page as it does within the book itself, and it does not scroll down as though it were a long one-page list. Tapping on the table of contents icon again does not advance to the next page either. How do I change pages of a table of contents to select a chapter or book beyond the first page of the contents list? This is not addressed in the User's Manual.

    No, sorry.

  • Error when trying to create 2 Forms on same page on 2 tables with ID as PK

    Hi all,
    here's the error message I get: "ORA-20001: Unable to create query and update page. ORA-20001: Unable to create form on table. ORA-20001: Error page=1 item="P1_ID" id="509501514227854745" ORA-20001: Error page=1 item="P1_ID" id="509501514227854745" has same name as existing application-level item. ORA-0000: normal, successful completion"
    What am I trying to do:
    I try to create 2 forms on the same page, each one based on tables that have PK column named "ID".
    From what I understand, HTML DB is trying to create for both forms the same "P1_ID" (P[no_page]_[column_name], right ?) hidden item in order to keep the value of the pk column...
    I think this is not right...what do you think ?
    Thanks,
    Andrei

    You cannot use multiple automated row fetch or automated DML processes on the same page where any table column names are in common between them.
    Scott

  • Maximum number of allowed pages in Pivot Table exceeded

    Hi,
    I am working on Oracle Business Intelligence 10.1.3.2.1 . We have a requirement to show one report in the Pivot layout.
    But it throws one error: "Maximum number of allowed pages in Pivot Table exceeded (Configured Limit: 1000) "
    So I have modified the Instanceconfig.xml with the following piece of code:
    <PivotView>
         <MaxVisibleColumns>9000</MaxVisibleColumns>     
         <MaxVisiblePages>90000</MaxVisiblePages>
         <MaxVisibleRows>9000000</MaxVisibleRows>
         <MaxVisibleSections>9000000</MaxVisibleSections>
         <ResultRowLimit>9000000</ResultRowLimit>
    </PivotView>
    <CubeMaxRecords>9000000</CubeMaxRecords>
    <CubeMaxPopulatedCells>9000000</CubeMaxPopulatedCells>
    The number of records is 30 398. In another report the amount is much higher than this number of records and bring it with no problem.
    Can anyone please look into this Issue.

    Hi
    Try checking the link
    http://obiee101.blogspot.com/2008/02/obiee-controling-pivot-view-behavior.html
    Hope this helps
    Regards
    Debo

  • Maximum number of allowed pages in Pivot Table exceeded Configured Limit:

    When trying to create Calculated Item on Pivot table Page section Item like Division dim the calculated item is 'All' -> sum * and Customer again the calculated item is 'All -> sum * . it performs the first calculation (for division) but in the next one it gives the error
    "Maximum number of allowed pages in Pivot Table exceeded (Configured Limit: 1000)."

    Try limiting the resultset or upgrade the [MaxVisiblePages]
    see: http://obiee101.blogspot.com/2008/02/obiee-controling-pivot-view-behavior.html
    regards
    John
    http://obiee101.blogspot.com

  • Maximum number of allowed pages in Pivot Table

    Hi All,
    We are in OBIEE 10g and I am facing following error in a dashboard -
    Maximum number of allowed pages in Pivot Table exceeded (Configured Limit: 1000).
    Error Details Error Codes: UN2FNAHV 
    My instanceconfig.xml has following details -
    WebConfig>
    <ServerInstance>
       <DSN>AnalyticsWeb</DSN>
       <CatalogPath>E:/OBIEE/OracleBIData/web/catalog/PlngAnalytics</CatalogPath>
       <PivotView>
        <MaxCells>20000</MaxCells>
        <maxvisiblecolumns>20000</maxvisiblecolumns>
        <maxvisiblepages>10000</maxvisiblepages>
        <maxvisiblerows>50000</maxvisiblerows>
        <maxvisiblesections>10000</maxvisiblesections>
       </PivotView>
        <CubeMaxRecords> 10000000 </CubeMaxRecords>
        <CubeMaxPopulatedCells> 10000000 </CubeMaxPopulatedCells>
       <Alerts>
          <ScheduleServer>APPC-tst</ScheduleServer>
       </Alerts>
    Where is this limit set? Appreciate help on this please.

    Try limiting the result set or upgrade the [MaxVisiblePages]
    Check John's blog:-
    http://obiee101.blogspot.com/2008/02/obiee-controling-pivot-view-behavior.html
    Restart the services once it is done.
    Mark if helps,
    Thanks,

  • Bookmark in the PDF goes to last page of the table

    Why would converting a Word document with a multiple page table that has repeating Headers, cause the bookmark in the PDF go to the last page of the table not the first page?
    I'm using Word 2010, Windows 7, Acrobat X Pro

    Thanks David ! What are my options (tuning) at my end. Indicies at the database end, Cache the Report anything else ? Also download to excel is taking long time.
    Regards,
    Sam

  • Pages in Pivot Table

    I was trying to set three pages (time, location, and product) in one of my Pivot Table design. However, I received the following error message:
    Maximum number of allowed pages in Pivot Table exceeded (Configured Limit: 1000). Error Details
    Error Codes: UN2FNAHV
    Any suggestions how to slicing and dicing the records with three or more filters in Pivot Table?

    Try limiting the resultset or upgrade the [MaxVisiblePages]
    see: http://obiee101.blogspot.com/2008/02/obiee-controling-pivot-view-behavior.html
    regards
    John
    http://obiee101.blogspot.com

  • Stale Data Error in Last Page of the Table

    Hi,
    we are getting stale data error if we are performing any action in the Last Page of the Table.....
    It is working fine when we are performing an action on any other page... but when we are performing action on the Last Page of the Table we are encountering this Error
    Can someone please help me out of this Issue??
    Thanks,
    Sravanth

    if i click the next row's show hide then its shows the same result as ist row, and i try to use show/hide link more thann three times then it throws stale data error given below.
    >>> Seems like your VO linking is not proper. Does your VO have primary keys defined? Do you have any custom code on these VO?
    --Shiv                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • How to put 'Continue in next page' below the table.

    Hi,
    I have an invoice where all the lines are not fitting into one page. So some of the lines are getting printed in the second page. But in this case I wanted to put a message below the first page as "continue on next page"
    Since Iam a newbie to XML/BI Publisher I kinda stuck here. Tons of thanks in advance.
    This is how I need the output
    --- PAge1 --
    heading1
    line1
    line2
    line3
    line4
    line5
    line6
    line7
    line8
    line9
    line10
    Continue on next page
    -- page 2--
    heading1
    line11
    line12
    line13
    line14
    line15
    line16
    line17
    _________

    There are so many threads for this lately,..
    Go here
    http://winrichman.blogspot.com/...
    Here is some of the thread people were desperately looking for answers :).
    how can we get "Page Continued" at footer of page.
    Re: How do I print the word "Continued" at the bottom of page in BI publisher?
    How to Display 'Continued' in second& subsequent page but not in last page?
    Re: Printing signature on footer section of every page
    Re: How to put 'Continue in next page' below the table.
    Re: How do I check the last page?
    Help needed in XML Publisher rtf file
    Re: Different value in footer
    Changing header information within a document
    Re: Invoice Page break
    Re: Footer information in very page
    Re: Check Printing
    Oops, I initially thought , there would less number of threads,
    Hope my blog helps them :)

  • Search static pages AND database tables

    Hi,
    I'm working on a project in which I have static content
    pages, plus I'm creating a set of dynamic pages that display jobs
    and events listings etc. The dynamic pages are going to run off an
    access database.
    I'm need to create a search facility on the site. At present
    I'm planning to use a drop down box (or radio buttons ?) to allow
    the user to select which part of the site to search (main site,
    jobs or events), the selection will determine which search page the
    form query is passed to (site text search or database query search
    page).
    Am I approaching this correctly.
    Can anyone comment on possibly a better or alternative way of
    providing such a search option ? (searching both static pages and
    database tables)
    Thanks in advance.

    I guess something like <cffile action="read"
    file="C:\docs\shopping.html" variable="shoppingList">. Is there
    a way to do multiple files at once?

  • Add pages before the table of content into the table of content

    Hey,
    I was wondering if someone can help me. I'm writing my dissertation and I have to include an abstract and acknowledgments before the table of content ( written on pages 1 and 2). How can I get pages to include these pages within the table of contents written on page 3?
    Thanks
    Ordidge

    You can't get it in the TOC automatically. You can do it manually but you'll loose the updating feature of the TOC so do it when you are certain you are finished with the document.
    What you do is copy the whole TOC and paste it in Textedit. Here you can do all the changes you want. Copy it again and paste it back in the Pages document.
    Also read this
    http://support.apple.com/kb/TS2127?viewlocale=en_US

  • Table Overflow - Page Break - Multiple tables in Body page in Adobe forms

    Hi,
    I have to do a payslip in Adobe forms. I am using only Adobe for print forms.
    Please redirect me to correct category if this is wrong category.
    I am customizing standard form PYXXFO_SAP_PAYSLIP_IN01. (payslip for india through hrforms)
    The standard form is entirely positional. So, if the contents of the table overflow, they are overwritten on the contents below.
    So, I have to make corrections to adjust the payslip for table overflows.
    My changes:
    1. There are total 8 tables in form. I created content areas for each of them and assigned the subforms/tables to those content areas.
    2. I converted the body page from positional to flowed, and applied the related pagebreak settings.
    The problem I am facing:
    When the earnings table overflows, the rest of the content is displayed on second page, in a continuous manner.
    eg.
    The structure of the form is:
    Header details
    earnings table   deductions table   form16 table
    Other tables
    leave details
    now, if the earnings table overflows -
    page 1:
    Header details
    earnings table (page break)
    Page2:
    (continued)earnings table
    page3:
    (continued)earnings table   deductions table   form16 table
    Other tables
    leave details
    In this, the deduction table and form16 table is shown on 3rd page. I wish to show them on the first page as they have not overflown.
    I am sure, I am missing something very small, but I am unable to understand what.
    I tried all the possible combinations.
    Does the main subform needs to be "positional"?
    They way I expect it is:
    page 1:
    Header details
    earnings table (page break)    deductions table   form16 table
    Other tables
    leave details
    Page2:
    {Header details - It would be great if I could have this}
    (continued)earnings table
    page3:
    {Header details}
    (continued)earnings table
    Also, If this is successful, I would like to apply the same feature to rest 6-7 tables.
    Edited by: chinmay kulkarni on Aug 17, 2011 3:04 PM

    This was a duplicate question.
    Kindly remove this thread if possible.
    The solution for this thread is as follows:
    I was sort of hoping that there should be some standard functionality available for this, it being Adobe, but there is not.
    So, I had to run a work around. Quite a lengthy one.
    What the problem was:
    I needed to print around 4-5 tables adjacent to each other in single page and in verticals. What Adobe does is: it fills 1st table, then 2nd then 3rd and so on. So, if there is a page break due to large entries in the adobe, the contents breaks with rest of the tables being blank, but the content being filled sequentially.
    What I did was:
    I created a grand table with the structure having all the tables embedded in it. eg.
    data: begin of grand_table occrs 0,
    table_A type table_a_table_type,
    table_B type table_b_table_type,
    table_c type table_c_table_type,
    end of grand_table.
    Hence, I could include all the data in a one single grand table, and put the data in sequential manner.

  • OBIEE:Page Items in Table View

    Hi, I m new in obiee
    I m facing problem in adding page items in table view,
    can u please tell me how to add it?
    Thanks,
    Rohit.

    yes, you are right...(Raghu)
    I am creating tabular report where i want to add page section in table view like pivot table....
    thanks,
    waiting for your reply..
    Rohit..
    Edited by: rohitdesai on Feb 5, 2010 2:12 AM
    Edited by: rohitdesai on Feb 5, 2010 2:15 AM

  • Going to the last page of a table when adding a new object

    I added a Table(com.sun.rave.web.ui.component.Table) on my page and a button outside of that table to add new object rows. My problem is that I want the table to move to the last page when I add a new object. Instead the default bahaviour is showing the first page. Even if the newly added row is on a page > page 1.
    e.g If I have a table with 5 pages and I am on page 1 and I add an object I want to see the last page of the table where I added the new object. In other words I want it to go to page 5 or page 6 in case the number of the new object is > the number of displayable rows of a page.
    I did it with Javascript but I just dont like it. I wanna do it programmatically.
    Any help?
    Thanks in advance guys!!!

    Hi!
    Try to look here:
    http://forum.java.sun.com/thread.jspa?threadID=5142038&tstart=45
    Thanks,
    Roman.

Maybe you are looking for