Pages in Pivot Table

I was trying to set three pages (time, location, and product) in one of my Pivot Table design. However, I received the following error message:
Maximum number of allowed pages in Pivot Table exceeded (Configured Limit: 1000). Error Details
Error Codes: UN2FNAHV
Any suggestions how to slicing and dicing the records with three or more filters in Pivot Table?

Try limiting the resultset or upgrade the [MaxVisiblePages]
see: http://obiee101.blogspot.com/2008/02/obiee-controling-pivot-view-behavior.html
regards
John
http://obiee101.blogspot.com

Similar Messages

Maximum number of allowed pages in Pivot Table exceeded

Hi,
I am working on Oracle Business Intelligence 10.1.3.2.1 . We have a requirement to show one report in the Pivot layout.
But it throws one error: "Maximum number of allowed pages in Pivot Table exceeded (Configured Limit: 1000) "
So I have modified the Instanceconfig.xml with the following piece of code:
<PivotView>
     <MaxVisibleColumns>9000</MaxVisibleColumns>
     <MaxVisiblePages>90000</MaxVisiblePages>
     <MaxVisibleRows>9000000</MaxVisibleRows>
     <MaxVisibleSections>9000000</MaxVisibleSections>
     <ResultRowLimit>9000000</ResultRowLimit>
</PivotView>
<CubeMaxRecords>9000000</CubeMaxRecords>
<CubeMaxPopulatedCells>9000000</CubeMaxPopulatedCells>
The number of records is 30 398. In another report the amount is much higher than this number of records and bring it with no problem.
Can anyone please look into this Issue.

Hi
Try checking the link
http://obiee101.blogspot.com/2008/02/obiee-controling-pivot-view-behavior.html
Hope this helps
Regards
Debo

Maximum number of allowed pages in Pivot Table exceeded Configured Limit:

When trying to create Calculated Item on Pivot table Page section Item like Division dim the calculated item is 'All' -> sum * and Customer again the calculated item is 'All -> sum * . it performs the first calculation (for division) but in the next one it gives the error
"Maximum number of allowed pages in Pivot Table exceeded (Configured Limit: 1000)."

Try limiting the resultset or upgrade the [MaxVisiblePages]
see: http://obiee101.blogspot.com/2008/02/obiee-controling-pivot-view-behavior.html
regards
John
http://obiee101.blogspot.com

Maximum number of allowed pages in Pivot Table

Hi All,
We are in OBIEE 10g and I am facing following error in a dashboard -
Maximum number of allowed pages in Pivot Table exceeded (Configured Limit: 1000).
Error Details Error Codes: UN2FNAHV
My instanceconfig.xml has following details -
WebConfig>
<ServerInstance>
   <DSN>AnalyticsWeb</DSN>
   <CatalogPath>E:/OBIEE/OracleBIData/web/catalog/PlngAnalytics</CatalogPath>
   <PivotView>
    <MaxCells>20000</MaxCells>
    <maxvisiblecolumns>20000</maxvisiblecolumns>
    <maxvisiblepages>10000</maxvisiblepages>
    <maxvisiblerows>50000</maxvisiblerows>
    <maxvisiblesections>10000</maxvisiblesections>
   </PivotView>
    <CubeMaxRecords> 10000000 </CubeMaxRecords>
    <CubeMaxPopulatedCells> 10000000 </CubeMaxPopulatedCells>
   <Alerts>
      <ScheduleServer>APPC-tst</ScheduleServer>
   </Alerts>
Where is this limit set? Appreciate help on this please.

Try limiting the result set or upgrade the [MaxVisiblePages]
Check John's blog:-
http://obiee101.blogspot.com/2008/02/obiee-controling-pivot-view-behavior.html
Restart the services once it is done.
Mark if helps,
Thanks,

How use "All Values" in the pages of pivot tables

Hi everyone,
I’m using Oracle Bi Answers and I have the following problem:
I’m doing reports based in a datamart with 2 fact table each with about 28 Million records per month and with a medium of 14 dimensions.
The users want to have the choice to select 5 parameters for example (region, district, type of product, month of analysis, subtype of product) where they can select an individual option as well as select an “all values” option. They want this for all the parameters.
We are having problems doing this without having the report to timeout.
Approaches used
We are trying to do this by using pivot tables and combo boxes in the reports (one for each parameter). The combos are in the pages area.
We are trying to do a calculated item with Sum(*) to have a “ALL Values” in the combo box but this makes the report extremely slow.
We also tried to do Sum in the pages section of the pivot table but it only displays the “All pages value” of the first combo box.
So actually I don’t know what to try. Can you help me with the best way to do this?
Thanks
Edited by: user8727081 on Sep 28, 2009 2:45 AM

Hi,
I had the same problem, and I solved it using the dashboard prompts.
But sometimes users are not happy. I explaine why.
Suppose a dimension Nation:
Italy, Germany, UK, France, USA
1) I create a report with sales quantity.
2) Report has a filter --> "nation" = is prompted
3) I create a dashboard prompt "Nations" based on dimension Nation with All Values
4) I publish the report in a dashboard with the dashboard prompt "Nations"
When user choose the nation from the prompt, all nations are displayed, also if I have NO sales for some of these.
My goal: only nations with sales must be shown
Thanks
Enrico

How to create a record link in pivot table?

Hi,
I have records in pivot table.
I want to have ActionLink on the record, ex., i have lead record clicking on first name or last name or lead id it should take to me to the detail lead page(from pivot table).
Regards,
-Venkat.

To achieve this, use the following:
In column properties, choose data format tab.
Override the default data format, Treat Text as Custom Text Format.
Paste the following into the format box:
@[html]<a href="/OnDemand/user/LeadsDetailPage?OMTGT=LeadDetailForm&LeadDetailForm.Id="@ target="_parent">"Lead Details"<a/>
Good Luck.
Edited by: Thom L on Apr 17, 2009 10:16 AM

Unable to group with page breaks when creating pivot table in BIP

Hi,
I'm using BIP 10.1.3.4 and I need some assistance with report with pivot tables. I used the wizard to successfully create the pivot table but i need to add a group and break the page on that group. Is there any way i can do this?
Thanks.

HI Bala,
I am Durgaprasad from Pune-INDIA, working as a OBIEE developer, I have one query which I mentioned below can you please go threw it.
I have done migration Discoverer Admin EUL Layer into OBIEE repository using below methodology.
Navigate to the <installdrive>\OracleBI\server\Bin directory. There are two important files in this directory: the migration assistant executable file named MigrateEUL.exe and a properties configuration file named MigrationConfig.properties.
Could you please help me how to migrate discoverer plus workbooks and worksheets into OBIEE Answers?
go through below link, It will show navigation steps for migrating of EUL from Discoverer to OBIEE.But i need migration of workbooks and worksheets from Discoverer into OBIEE Answers.
http://www.oracle.com/technology/obe/obe_bi/discoverer/discoverer_1012/discomigration/migrate_disco_biee.htm
This is very great full help to me …
Advance thanks for your suggestions.
Regards
Duraga Prasad.

How to show "ALL" Values by default in Page Drop-Down Lists in Pivot Tables

Hi Everyone,
Iam stuck with 1 problem please can any 1 help me if u know the solution.
Here is my problem:
How to show "ALL" Values by default in Page Drop-Down Lists in Oracle BI Pivot Tables?
For example, if you place Region in the pages area, a Region drop-down list allows the user to select a particular region, and see the data for only that region, rather than seeing all the Regions,But by default its not showing "ALL" option in the drop down list ,rather than doing that its showing result for only 1 region by default.
And an other problem with this pages area is, if we palce the multiple attributes in the Pages area in the pivot table, the (Fields)result is showing in vertically, the attributes 1 by 1(Every attribute in a new line) ,rather than showing like that, is there any way to show the results in horizantally?(We want to have it as a seperate drop drown list for every field horizantally not as a concatenated list).

Thanks Nikhil. But I am fetching the values from the LOVCache.java.
I am using <af:selectManyChoice>. Is there any way I can use LOVCache.java value for selecting default values instead of hard coding?
I mean to say can I write
unselectedLabel="#{LOVCache.entityTypeSelectionList.anyValue}"
where LOVCache.entityTypeSelectionList is used to populate the drop down box.
Regards,
Aseet

Pivot Table page-item as a multi select

Can this be done? When placign an item in the "page" shelf of the pivot table, the default is to allow a single valeu selection, but can we allow multiple selections.
For instance, if I place region in the Page item area, can I allow the user to select "West" and "East" as opposed to just 1 distinct value?

Why not just use a prompt with a multiselect box then?
It looks the same for the end user, only now he have to wait when he chooses another combo... in stead of that he had to wait only in the beginning something longer

Can we create a pivot table of Excel in a JSP page using POI

Hello,
I want to know whether we can create a pivot table of excel sheet in a jsp page using POI package from apache.
thank you.

Hi Alex,
Many thanks for replying.
I followed the link, but unable to get correct output.. I have shared the template earlier. I can share the template once again.
It would be grateful if you give me share the working template with table of content.

How to place the page items horizontal in pivot table in OBIEE

Hi experts
In pivot table i have two pages items. And i want to place them horizaontaly. So how can i achieve this.
for Ex: I have placed my two columns in page section of pivot table: Year,city.
then i need as ;
Year City
where year is one dropdown list and city is another drop down list.
Thanks in advance
Regards
Sunil

Hi,
We can seperate the page items using 'Start New Page Drop Down', but the item will be displayed in the next line.
I think you would like to show them side by side i.e, horizontally..
If it is, i think it is not possible as of OBIEE 10.1.3.3.. not sure about 10.1.3.4..
Please let me know if my assumption is wrong.. I will be very happy if anyone corrects me..:)
-Vency

Pivot Table, "Insert Page Break After Each Item" Setting Only Works for the First Item Change

I have a flattened pivot table generated from Powerpivot and I would like to insert a page break for each change in the row item.
When I use the pivot table Field Settings>Insert Page Break After Each Item, Excel inserts the first page break then returns to normal pagination for the rest of the output.
Is there another setting required to maintain the page breaks after the item change?
Thanks.

We are experiencing the same problem. Did you ever find a solution?

How Can I Add Pivot Tables of Excel Into JSP Pages

Hello all,
Basing upon a query to database, i wanted to add a Microsoft Excel pivot table functionality in JSP page [with the result of query].
Is it possible to create a Pivot Table in JSP with dynamic data from database ??
Can any body help me in solving this issue ???
Thanks & Regards
Krishna

There are a few alternatives to doing this (depending on the clients you are serving this page up for).
Going the pure HTML
There is an open source project called JPivot which provides an HTML front end for Pivot Table (using tag libraries)
Going the Microsoft Office route there are a few options:
1) POI HSSF ( http://jakarta.apache.org/poi/index.html) allows you to "update" an existing Pivot table by replacing data values contained in a template pivot table.
2) Use the open source XELEM api (xelem.sourceforge.net) which produces SpreadsheetML (Micorsofts current XML file Format). At present, I don't believe this handles creating a pivot table from scratch (you have to manually create the Pivot Table template, read in the template (with XELEM) and update the data values in the template before writing it out. (the same holds true for POI)
3) Commercially the company I work for (www.workbeans.com) is writing a pure Java Pivot Table API that will allow you to create a Pivot Table in the Excel SpreadsheetML file format from scratch. (supported by Office 2000, XP and 2003). The Pivot table functionality isn't slated until a future release (Oct. 2005), so if you can wait until then we could help you further.
Best,
Eric
M. Eric DeFazio
Application Architect, workbeans
[email protected]

Navigate to web page pivot table

Hi All,
I found a strange behavior. I am trying to pass the parameters through navigation to web page using the following concept.I am trying to pass two parameters instead of one. The two parameters are passed only when the report is in normal table form. If i create the pivot table , only one parameter is passed, the remaining value shows null. Is this a bug in obiee 11g?
http://prasadmadhasi.com/2011/12/15/hierarchicalnavigationinobiee11g/#comment-321
Thanks,
Virat

Did you check to have the results to be 'embedded in section' in your dashboard section properties?
kris

Drill Down in Pivot Table with item on page level

Hi,
I've got a pivot table with Chart next to it. The chart is a separate view, I did not use the 'Chart pivoted results' option.
My pivot table has one Page Level item being the Month Name.
I now have the strange behavior that drilling down on the Pivot table elements gives me No Results as my filter would be too restrictive. The problem is with the 'Month Name'. Removing this item from the filter shows the correct data. When I use the chart next to my data to do the drilling I encounter no problems. This is because this way the restriction on the month name is not added when drilling.
Has anybody encountered this behavior before and knows of a way to solve this.
Thanks for your advice,
Kris

My query looks like this :
SELECT TO_NUMBER (TO_CHAR (t1601.datum_prestatie, 'MM'), '99') AS c3,
t1584.description AS c4, t1497.project_group AS c5,
t1497.project_desc AS c6, t1497.project_code AS c7,
CONCAT (CONCAT (t2241.firstname, ' '), t2241.lastname) AS c8,
t2254.employee_number AS c9, t1601.duur AS c11,
t1601.datum_prestatie AS c12
FROM t_projects t1497 /* Dim_PROJECTS */,
t_organization t1579 /* DimX_ORGANIZATION_Project */,
t_organization t1584 /* DimX_ORGANIZATION_Project_Parent */,
t_employees t2241 /* DimA_EMPLOYEE_Prestatie */,
t_prestaties t2254 /* DimA_PRESTATIE_Project */,
t_prestaties t1601 /* Fact_PRESTATIES */
WHERE ( t1497.business_domain_code = t1579.department_code
AND t1497.project_code = t1601.project_code
AND t1497.project_code = t2254.project_code
AND t1579.parent_department = t1584.department_code
AND t2241.employee_number = t2254.employee_number
AND t1584.description = 'Specialized Technologies'
AND t1497.project_group = 'SUPP AP TM'
AND TO_NUMBER (TO_CHAR (t1601.datum_prestatie, 'MM'), '99') = 3
The last row being a check on the month number.
At the same time in OBIEE I get this :
No Results
     The specified criteria didn't result in any data. This is often caused by applying filters that are too restrictive or that contain incorrect values. Please check your Request Filters and try again. The filters currently being applied are shown below.
     Divisie is equal to Specialized Technologies
and      Month is equal to 3
and      Project Group is equal to SUPP AP TM
and      Month Name is equal to Mar
The physical query doesn't even show the restriction on Month Name which makes it even more spooky...

Pages in Pivot Table

Similar Messages

Maybe you are looking for