Pages print in draft mode. first line normal and then the rest faint, how dop I restore this please

Pages printing in draft mode. First line normal and the rest is faint.
Please, how do I reset this.
Thanks
Bruce

If you are using a printer (e.g. HP) that has an Economode (powersaver) setting, leave this off. Otherwise, your prints will look washed out as though toner was depleted.
Since Pages itself does not have a selectable “draft” mode, the focus will be on your printer hardware and configuration.

Similar Messages

  • Hi, when typing an email the font on the first line is different then the second, can you help fix this

    Hi, when typing an email the font on the first line is different then the second, can you help fix this

    I can offer suggestions, but I can not fix it.
    Press enter three or four times before you start typing and then move the cursor back to the start. What happens is your point of insertion gets outside your predefined font range, it is a know bug and that will help you "stay in the lines" Another option is type Rick, go back to the start and then type your message. Anything which keeps the insertion point from the very end of the email really.

  • On start up green vertical lines appear and then the become spots and imac freezes

    on start up green vertical lines appear and then they become spots covering entire screen and imac freezes, does not start. I need to do a safe boot to open the imac 2009

    Unfortunately this sounds like a hardware failure. Run Apple Hardware Test in extended modeat least 2-3 times back to back. If errors appear then you have confirmed my suspicion. However if no errors appear unfortunatelyyou are not out of the woods l yet  because AHT is not the more reliable test. If you do know know how to run AHT please refer to:
    support.apple.com/kb/ht1509

  • Prints two lines perfect and then the next line cannot be read.

    Pixma MX882 When printing from computer or copying it prints two lines perfect, then the third line is not clear.  Can see letters are fuzzy (not clear, but can tell it tried to print)  Please help with any suggestions for correcting this problem. I have changed out the ink carts and run maintenance program.  Thanks.  Ross

    Hi rossfwalker,
    We recommend performing an automatic and manual print head alignment on the printer to see if this will resolve the issue. To do this, please follow the steps located here.  Should you still experience difficulty, the printer will require servicing; please call or email us using one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • I need to change the "from" address (the "add to addressbook" address) in the first line of emails that I send. How do I do this?

    I need to change the "from" address (the "add to addressbook" address) in the first line of emails that I send so that people reply to my email alias not the address where my emails originate. How do I do this?

    So you have added a new 'Identity' to your existing email address.
    If someone sends an email using that 'other identity'
    you have a choice of where those received emails can go. they can be received into the original mail account, like a collect all in the one Inbox or perhaps sent to Local Folders, so you can see them as separate. Or you can filter on that identity to put those emails in a specific folder.
    When you REply to any incoming mail that has used that new identity email address, it will use the new identity in the Email address in FROM assuming the received email in the main mail account of which the new identity email is applied.
    This should also now offer the added identity email address as an option in the FROM drop down list. So you can easily swap when sending an email if required.
    If you want to send using your default email address to people, but want their reply to use the identity email address:
    Tools > Account Settings
    select the original email address mail account name
    Where it says: 'Reply to addresses: enter the reply to identity email address.
    click on OK
    This means when they click on 'Reply' it will auto insert the Reply-to option.
    This will work providing it is a 'Reply' to an email you sent which contains the Reply-to email address.
    If someone is not actually replying by using the Reply-to new identity email address:
    In other words they are sending you a new email using the original email address because perhaps that is the one in their address book or the one they located on a webpage etc.
    Then, when you select to Reply to that email, it will use the email address to which it was sent to in the FROM field - the original email address. Hence why you would need to select the new identity FROM in the drop down list.
    One way to get around this is set out below.
    If you do not use an identity - instead you create another existing mail account for the 'identity' email address, so you have two mail accounts for the two email addresses.
    You can move selected emails manually or perhaps using a filter to screen them from the original mail account into the newly created mail account.
    Then when you click on Reply, it will use the new mail account email address instead of the original email address.

  • Bridge CS5 Output Module only uses first 20 images and ignores the rest

    This happens with all the different styles, both PDF and Web.  Even though more than 20 images are selected, only 20 show up both in the preview and in the final PDF or web page.  It just started happening.

    It just started happening.
    This always means First Aid for Bridge, that is first to purge cache for
    folder using the menu tools/cache/purge cache for folder while having the
    content window pointed to the folder the problem occurs.
    Second option is renew preferences by holding down option key while
    restarting bridge and choose refresh preferences. Try again and if OK set
    prefs again to your wishes to see if it still works.

  • Black line texture map over the texture. How can I turn this off?

    I have recently been editing textures from 3D models, but when I open the texture, black lines appear on my screen, displaying a texture map over the actual texture. This is not a layer, or something I can turn off in Window settings, and resetting my Photoshop settings does not help (Photoshop CC).
    Is there a way to turn this off as it is interfering with what I am trying to do greatly.

    System Preferences > Universal Access > Seeing > Uncheck Voiceover, or any of the options on that page.
    Edit: Sorry, read your OP wrong.
    However the solution is likely to be in universal access, so take a look through there, and you'll most likely find the solution.

  • Pages works with all other docs, except the one I need to work on.  From my downloads folder I can preview the entire file, however whenever I try to open it, i get the "opening" pane filled to ~90% and then the SBBOD.  Only file it does this on...help??

    From my downloads folder it recognizes the file as a Pages document, I can preview the entire document, but I try to open the file in multiple ways (from right click, to open from preview, from inside pages) and it refuses to open.  The "opening" prompt comes up, fills ~90% and then I eventually get the SBBOD.  It will fail out if given long enough to think it through or i need to force quit.
    OS- 10.7.5
    Pages: downloaded from App store when i purchased my mac mini last fall. fresh update.

    Since it has always been very basic to backup your computer and all it's data, Apple provides no way for you to transfer music from your iPhone back to your computer.  As you know, you can re-download all iTunes purchases, but music that you ripped yourself you'll have to just re-rip again.
    You can try and find 3rd party applications that might help you.  I'm sure you'll pay, however.
    Let this be a very important lesson learned.
    Best.

  • When I minimize mt pages they go to desktop instead of going down to the bottom taskbar,how can i change this?

    I then have to minimize this stupid and possibly the worst version of firefox to get back to my previous programs or pages.This version makes IE shine!

    I had this problem as well. Depending on the OS you are running I had found the easiest way to solve this problem is just to goto a previous restore point on your pc. Hope this solves your problem as it did mine!

  • FireFox 33 is not rendering a pdf to be printed. It worked in version 29 and on other browsers. How do you fix this?

    I have some screen shots of the "Failed" pdf file. The pdf renders and we are able to print from other browsers. I have tried resetting FireFox, tried running in safe mode. I am at my wits end. I don't see a way to attache a Word doc here.

    Hi cbwilson, window.createPopup is a proprietary method of older versions of IE. Maybe your script redefines it for Firefox, but the redefinition no longer works in Firefox 33 for some reason?
    You originally mentioned Firefox 29. Is that the last version in which this page worked, or did it just start failing in Firefox 33? This is going to sound silly, but... some older scripts may only check the first digit of the version number, so if this problem started with Firefox 30, it might be due to some code that functions differently when encountering version 3.

  • I start my macbook pro april 2011 everything goes normal and then the desktop displays as usual but i can't select anything, or open any program, or document and even i can't shutdown the macbook or do nothing. Help me please! What is going on?

    Help! I've restarted my macbook like ten times and it seems not working anymore!

    Reboot and hold down the command-r keys into the Lion Recovery Disk. Select Disk Utility and run Repair Disk.

  • I'm affraid I lost my "Word" document of 30 pages. I can see only stars,squares and other strange figures. How can I recover this? Please I need help!!!

    I need help! My daughter is busy with her final studyprogram. Her "word" document changed into stars and other strange figures. Is there a possibility to recover this. I hope someone can help her!!!! thanks jvdharst

    Are you using the latest version of MS Word?  It’s possible you can restore the corrupt file from the last saved version or the automatically saved version.  Have you tried that?  MS Word uses a folder called Autorecover to store temporary versions of your file.  Hopefully there’s a good version in that folder.  Use Finder to search for Autorecover if needed.

  • Sorting - numbers first and then the alphabets ?

    Hi,
    I have a list of names
    starting with space, starting with numbers and some starting with upper case and then some starting with lower case letters.
    The default order by sorts is - spaces, numbers, upper case alphabets and lower case alphabets.
    But I want to order the names by spaces first, lower case alphabets, upper case alphabets and then the numbers.
    How do i do this? Any help is appreciated.
    thanks

    Hi,
    So you have 62 characters (10 digits, 26 capital letters and 26 small letters) that are now being sorted in one order, but you want them sorted in another order.
    ORDER BY a TRANSLATEd version of the string:
    SELECT     name
    FROM     table_x
    ORDER BY     TRANSLATE
         ( name
         , 'abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789'
         , '0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz'
         );Notice that the 2nd argument to TRANSLATE has the 62 characters in the desired order.
    The 3rd argument has the same 62 characters in the default sort order, that is, the order in which they will be sorted.
    That is:
    'a' will now be sorted as if it were '0', the very first of the 62
    'b' will now be sorted as if it were '1', the second of the 62
    '9' will now be sorted as if it were 'z', the last of the 62

  • Lines above and below the total values

    Hi All,
    This is for an invoice. I display line items and then the totals. I want to draw lines above and below the total values. i am able to underline the total values using the paragraph formats but that will give only lines below the values. how can I get the lines above and below the values in correct proportions? Please give me some ideas on how to do this.
    Thank you,
    Prathima.

    Prathima,
    You should not be using ULINE and VLINE commands here. Instead you have to declare boxes.
    /:           BOX FRAME 10 TW
    /:           BOX XPOS  '3.0' CM  WIDTH 0 TW FRAME 10 TW
    /:           BOX XPOS  '6.0' CM  WIDTH 0 TW FRAME 10 TW
    /:           BOX XPOS  '9.0' CM  WIDTH 0 TW FRAME 10 TW
    /:           BOX XPOS '12.0' CM  WIDTH 0 TW FRAME 10 TW
    Using boxes is advantageous in a lot of ways as you can specify the x and y positions exactly.
    Thanks
    Aneesh.

  • How do I print in draft mode on Epson Workforce 3540

    I just bought and set up an Epson Workforce all in one printer.  Everything is working fine, except that I can't get it to print in draft mode.
    I've tried a few different applications and all are the same.  When I go to print, I get a window that includes a print quality slider at the bottom that includes three settings: draft, normal, and best.  The word "draft" is grayed-out.  If I try to drag the slider to it, it snaps back to normal in the middle.
    I looked in the printer's manual, and it says draft mode can only be selected with "plain paper" selected.  But, even when I have plain paper selected, I cannot choose draft quality.  In fact, it seems no matter what I try I cannot choose draft quality.
    The printer's owner's manual, it also shows some printer dialog windows that I don't get (I think I did get them with the Epson I just replaced, though).
    Can anyone tell me how I can select draft print quality, and why I'm having so many problems doing so?  Maybe it's to be expected that the Epson isn't letting me select the print mode quality that would save me the most ink.
    I'm attaching a screen capture of what I see when I try to print.  It is the first image.
    I'm also attaching a couple of screen captures from the printer's owner's manual section on Mac printing.  These are the printer dialog windows I don't see when I try to print.
    What I see when I try to print (note that "Draft" is grayed-out on the quality slider):
    These are what the printer's manual seems to suggest I should see (and what I think I did see with my last Epson printer that I just replaced):
    And:

    Based on your screen captures I believe you may have selected Apple's AirPrint driver rather than the Epson driver. This can happen if you add the printer by selecting it from the small pop-up window that appears with a heading of Nearby Printers after you click the plus button in the Print & Scan preference pane.
    To confirm which printer driver you are using, open the Print & Scan preference pane and select the Epson in the Printers colum. The right pane will give some details about the printer. If there is mention of AirPrint in the printer Name or Kind, then this will be the issue. The fix would be to remove this printer from Print & Scan and add again. But this time, don't select the Epson from the Nearby Printers pop-up. Instead, click on Add Printer Or Scanner from this pop-up window and from the next Default Add printer window, select the Epson in the list and ensure you select the Epson driver in the Use menu rather than the AirPrint driver.

Maybe you are looking for