Paging Analysis Item in 0ANALYSIS_PATTERN

Hi !
I have made some changes to 0ANALYSIS_PATTERN to customize it to our needs in a second template.
The thing is that I need to change the way the Analysis Item in this template behaves. I need to scroll, not paging, the results shown and despite I have set:
Use Scrollbars: ENABLED
Paging Type of Rows: AUTOMATIC (DEFAULT)
Paging Type of Columns: AUTOMATIC (DEFAULT)
Paging Area on Bottom of Table Visible: OFF
Paging Area on Top of Table Visible: OFF
Number of Data Columns Displayed at Once: 25(DEFAULT)
Columns Scrolled for each step: 0(DEFAULT)
Number of Data Rows Displayed at Once: 100(DEFAULT)
Rows Scrolled for each step: 0(DEFAULT)
I still have the Analysis Item with paging instead of scrolling...
Any ideas ? Can another object from the template be responsible for this ?
Thanks for any suggestion,
Regards
Santiago J. Reig

Hi Santiago.
Currently, your setting is to create a page every 100 lines:
(Number of Data Rows Displayed at Once: 100(DEFAULT))
To have the entire report appear, so you scroll down, set it to 0.
(Number of Data Rows Displayed at Once: 0)
Thanks,
Jeff

Similar Messages

  • Table (analysis item) Width -  In WAD

    Hi All,
    has someone been able to change the width of the analysis item in WAD? I do whatever I can and the table width is still the same..
    I particulary want to use full_width parametr.... so using module com.sap.ip.bi.rig.ColumnWidth is not really solution for me....
    Am I missing something, or is that a bug?
    Many thanks for any hints!!!
    Regards
    Pavel

    Hi Priya,
    thanks for answer.... The table seems OK, so everthing is displayed correctly.... see pics
    [http://www.screencast.com/users/pavel.rais/folders/SAP/media/9da56465-4a54-4589-8674-ba05f1456cba]
    But when I change width of table or chech full_width parameter, it stays the same and I need it to be broader....
    (I am using structers in my reports... so not sure if Paging could change something, I tried to change all the parameters anyway, but without any results....:-))
    Any Ideas?
    Thanks!
    Pavel

  • Manually closed DN appear with value 0 on sales analysis - items

    Hello everyone,
    When i manually close a Delivery Note (DN) using Data->Close that DN still appears on my sales analysis -> customer. (using the filter -> Delivery Notes)
    However when i use sales analysis -> items i only get the list of items contained on that DN. All the columns (quantity, sales amount, gross profit, etc) are with zero values.
    Is there any way of showing those values on the sales report? Or any other report? Is this standard system behavior? Shouldn't the items disappear completely then? What is the purpose of showing them without any further information?
    Looking forward to be hearing from you.
    Regards,
    Sérgio Romã

    Hello Gordon,
    Thanks for the quick reply.
    The business process requires me to close the DN manually:
    The customer has something like 4000 employees that are created as customers. Each of those employees has a pre-defined creditline amount. DNotes can be created for each employee until that amount. On the second week of every month i need to close all these DNotes (i am doing this using an addon that runs based on schedule defined in a user table and that closes all DN that meet certain conditions) so that i can add more DNotes to each employee. At the end of every month i have another addon that totals all DN added that month (closed and open) and creates a single service invoice for a customer (defined in each employee).
    So i need to close them manually because i cannot copy them to a consolidation partner (release of employee creditline and invoicing occur at the different moments during the month).
    My disagreament with the system behavior is the following:
    - I get the correct the results if i create a sales analysis -> customer. If they don't result in a sales transaction they shoudn't appear on this report either. (according to the logic you presented)
    - Sales analysis -> Item. The item lines appear with zero. Once again, if it is not a sales transaction they shoudn't appear at all (according to the same logic). The system is doing the same thing as if the DN has been copied to an invoice which is a wrong behavior. This is a different situation and the item detail should be visible on the sales analysis report.
    What do you think?
    Regards,
    Sérgio Romã

  • Sales Analysis Item Tab Function Not Showing Orders Dollars

    Hello Gurus of SAP B1.
    This pertains to SAP B1 SP 00 PL 16 Version 8.8. 
    While doing the Sales Analysis function under Sales A/R > Sales Reports > Sales Analysis > Item Tab, the system does not report on the dollars for the day when I select "Orders" or "Delivery Notes'.  The system does display the proper dollars when I select "Invoices" on the "Item" Tab. 
    And the "Invoices" and "Orders" and "Delivery Notes" buttons display correct dollars on the other tabs for Customer and Sales Employee...so why not on the "Items" tab???
    Does anyone know why this might be happening and/or how to fix this???
    Thanks in Advnace - Zal

    Thanks for the quick reply Gordon - hope things are continuing to go well in your new endeavors &;-D
    Well that is really strange that items is handled that way - I have created SQL to get the results but I always like to balance out to what SAP B1 is reporting.  My SQL detail and grand totals are fine by Customer and I have been able to reconcile in that manner, but wanted to reconcile by items also.  I am certain I have done it before in SAP 2007A...
    Has there been a change to the item/sales order table in Version 8.8???
    Take care my FFF - Zal

  • Sales Analysis Item Tab Displays Zero Dollars for "Orders"

    This pertains to SAP B1 SP 00 PL 16 Version 8.8.
    While doing the Sales Analysis function under Sales A/R > Sales Reports > Sales Analysis > Item Tab, the system does not report on the dollars for the day when I select "Orders" or "Delivery Notes'. The system does display the proper dollars when I select "Invoices" on the "Item" Tab.
    And the "Invoices" and "Orders" and "Delivery Notes" buttons display correct dollars on the other tabs for Customer and Sales Employee...so why not on the "Items" tab???  Strange that a button would be displayed which does not work...
    Does anyone know why this might be happening and/or how to fix this???
    Does SAP plan on fixing this in any upcoming patch levels???
    Regards - Zal
    Responses received from SAP B1 Core Forum:
    Sales Analysis Item Tab Function Not Showing Orders Dollars

    Thanks for the quick reply Gordon - hope things are continuing to go well in your new endeavors &;-D
    Well that is really strange that items is handled that way - I have created SQL to get the results but I always like to balance out to what SAP B1 is reporting.  My SQL detail and grand totals are fine by Customer and I have been able to reconcile in that manner, but wanted to reconcile by items also.  I am certain I have done it before in SAP 2007A...
    Has there been a change to the item/sales order table in Version 8.8???
    Take care my FFF - Zal

  • How to set dynamic column width for analysis item

    Dear Experts,
    I have a query view which is added in the web template as an analysis item. The web item properties on width is not working - I tried entering a value in the width but when I execute the template, the query view's width still stays the same.
    Module com.sap.ip.bi.rig.ColumnWidth don't seem correct because I don't want the column width to be static. As my number of columns may change, I wanted the overall width of my query view to stay the same.
    Appreciate any ideas which can solve this issue
    Thanks and Regards,
    huimin
    BW newbie

    Hi Huimin,
    I don't think it is possible to fix the width of the Analysis webitem since it dynamically adjusts its width based on the text maxlength within its cells. Unless you use com.sap.ip.bi.rig.ColumnWidth where the cols are static, you cannot achieve this.
    Even if you do override the css settings using a cell padding or something, the portal settings would override the same. How about using a Report webitem to insert tables/charts & check if the width can be adjusted here - just a thought.
    --Priya

  • Need Calendar Year as a Variable in the Caption of an Analysis Item WAD 7

    I am using Web Application Designer 7.X for the first time.
    I am modifying a template that has the following Analysis Item in it:
               <bi:ANALYSIS_ITEM name="TABLE_4" designheight="300" designwidth="966" >
                    <bi:WIDTH value="966" />
                    <bi:WITH_TRAY value="X" type="CHOICE" text="" >
                        <bi:TRAY_SETTINGS type="COMPOSITE" >
                            <bi:CAPTION value="Employee Information" >
                                <bi:text localkey="1" />
                            </bi:CAPTION>
                            <bi:CAPTION_VISIBLE value="X" />
                        </bi:TRAY_SETTINGS>
                    </bi:WITH_TRAY>
                    <bi:DATA_PROVIDER_REF value="DATAPROVIDER_5" />
                    <bi:LINKED_DATA_PROVIDER_REF_LIST type="ORDEREDLIST" />
                    <bi:ROW_HEADER_VISIBLE value="X" />
                </bi:ANALYSIS_ITEM>
    The Caption of the table is currently set to "Employee Information". I need the Caption of the table to say "2007 Employee Information" where the year is the previous year. In other words, if the web application is executed in 2008, the title would say "2007 Employee Information". If the web application is executed in 2009, the tilte would say "2008 Employee Information".
    I am very new to BW and WAD so a detailed explanation would be greatly appreciated.
    Points will be awarded.

    I am trying to change the caption of the Analysis Item using Javascript, but the caption is showing up blank.  This is my first attempt at writing Javascript so a detailed answer would be greatly appreciated. 
    I would like the caption to read "HR Data 2007" if the function is called in 2008.  I would like the caption to read "HR Data 2008" if the function is called in 2009.  So always use the previous year in the caption.
    I took the following steps: 
    1.  In Web Application Designer, I created a Script item in my Web template.
    2.  I created the function executeJS_SET_ITEM_PARAMTERS_R using the Script Editing Wizard.
    3.  I made modifications to the function to add the year into the caption.
    4.  I modified the XHTML by adding the function to the body onload.  I am not sure if I need to do this part or if my syntax is correct here.  I can't post how I formatted the body onload because this causes 500 errors when I try to post the message.
    Here is the part of the function that I modified using the Script Editing Wizard. 
                    // Create parameter CAPTION
                    var d = new Date();
                    d.getFullYear();
                    var newCaption = "HR Data " + d;
         var paramCAPTION = new sapbi_Parameter( "CAPTION", newCaption );
         paramListTRAY_SETTINGS.addParameter( paramCAPTION );
         // End parameter CAPTION!     
    Here is the XHTML for the Analysis Item showing that the caption is set to be visible.:
               <bi:ANALYSIS_ITEM name="TABLE_4" designheight="300" designwidth="966" >
                    <bi:WIDTH value="966" />
                    <bi:WITH_TRAY value="X" type="CHOICE" text="" >
                        <bi:TRAY_SETTINGS type="COMPOSITE" >
                            <bi:CAPTION />
                            <bi:CAPTION_VISIBLE value="X" />
                        </bi:TRAY_SETTINGS>
                    </bi:WITH_TRAY>
                    <bi:DATA_PROVIDER_REF value="DATAPROVIDER_5" />
                </bi:ANALYSIS_ITEM>
    Here is the XHTML for the Script Item:
                <bi:SCRIPT_ITEM name="SCRIPT_ITEM_1" designwidth="300" designheight="70" >
                    <bi:SCRIPT_CONTENT_TYPE_LIST value="JAVASCRIPT" />
                    <bi:SCRIPT value="biLargeData:9CG1G0CWFS76DYKR0YY9GYHEM" />
                </bi:SCRIPT_ITEM>
    Edited by: Karen Thompson on Apr 10, 2008 5:34 PM
    Edited by: Karen Thompson on Apr 11, 2008 6:21 PM

  • Fix Colulm Width in analysis item  WAD 2004s BI 7.0

    Hin guys,
    I have tried everything but can't find a way to fix certain columns of an analysis item.
    The system automatically defines the column width on base of the maximum length for all values in a column.
    But I want to fix or change the column width.
    Do you know a solution for this ?
    Thanks !
    regards
    Paul

    Hi Vivek,
    have a look at SAP Online Help: [http://help.sap.com/saphelp_nw2004s/helpdata/en/47/a0623a12753377e10000000a421937/content.htm].
    You may also try the note below.
    [https://service.sap.com/sap/support/notes/1118502]
    Best regards,
    Sebastian

  • WAD Analysis Item not displaying results

    Hi
    I have a very simple web template, containing a dropdown, an analysis item and the last refreshed date of my query.
    The dropdown displays the characteristics properly but the analysis item only shows the query columns headers not the data and a line "overall results", it's displaying only these two lines.
    I used WAD 3.x before and the table item displayed this query results properly.
    Is there some setting that has to be changed to display the data?
    Am I using the right item, the analysis item ?
    Any help is appreciated.
    Thank you,

    Hi Andrea,
    You have mentioned being on NW 7 EhP1 with SP 6 and patch 10. The SAP note clearly states that the correction is only available as part of a higher SP or patch which is either upgrading to "Support Package 07 for SAP NW BI7.0 EhP 1 BI JAVA" OR "Importing BI JAVA Patch SP06 #20 (Support Package 06, Patch level 20) for SAP EHP1 for NetWeaver 7.0 (7.01) BI JAVA into your BI-System".
    --Priya

  • WAD 2004s Analysis Item Row Select RRI_RECEIVER does not pass Filter values

    I have created an Analysis item and using a Data Provider that has a Sender-Reciever entry for it. I created a Command on the Row Selection Activation that does an Report to Report (RRI) jump to another web page(template or app whatever sap calls it). When running the page, it performs the jump to the other page, but does not filter the page on the selected hierarchy value on the original page.
    Why does this not work?
    If I do the same thing by selecting the Goto from the context menu on the cell it works fine.

    Answering my own question here....
    This was solved by applying the patch mentioned in Note 1115027.

  • Execute planning function in Web template for selected row in analysis item

    Hello all.
    I have been trying several different solution for this issue I have, but could not ,make it work. Hopefully, any of you can give me some ideas.
    Initially the scenario seems to be easy.
    I have a Web template were I show a query analysis item with costcenter, plan/act type, user and entry date. I allow single record selection in this item.
    I have a button that should execute a planning function from the plannig modeler.
    The planning function should be executed only for the costcenter and plan/act type which are selected in the analysis item.
    How do I have to link the two objects :analysis item and planning function, so that the planning function is executed with the correct filter? What should be the filter definition (if any expecific things to consider)?.
    Thanks in advance for your help.
    Best regards,
    Alfonso.

    Dear Deepti.
    Thanks a lot for your answer, but it did not solve my issue.
    The problem is that my query is not created over the same agregation level as the planning function is, and as per the link you have sent me it seems to be a prerequisite.
    Is there any other way to do it?
    More in detail, I am implementing a Lock/Unlock mechanissim for planning costcenters. I have a n ODS where I store my costcenetr status(lock or unlock) and I also have a cube where the planning values are stored.
    My query(to select the costcenter to unlock) is done from the ODS, and my planning function is done in an aggreagation level of my cube (this is to lock the costcenter in cube, to avoid incorredct updates while it is unlocked/locked).
    The issue that I have is that I can not find a way to send the selected information from the query to the planning function.
    I hope you have more ideas.
    Thanks a lot.

  • Want to count the number of rows of analysis item in WAD Template

    HI all,
    Detail Description:
    In my WAD report, i have a Export to Excel Option. But I want when I click on this button, one pop up will come only if no of rows of the Analysis Item is Greater than 10,000 ask for Do you want to proceed or not.
    Means 1st i want to count the no of rows in the Analysis Item, after that it will check, if the no of rows is greater that 10,000. then the pop up will come.
    Question:
    Does anyone know, "how to count the no of rows of the analysis Item ?" . It will be better if you know you to implement this with the help of java script.
    Means there must be some varible, which counts the no of rows. If you know then please help me

    Hi,
    Please find the below link which helps you to get solution of your question.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0bbb20f-2d7e-2e10-258f-8655daa41fab?QuickLink=index&overridelayout=true
    It is mainly used to automate queries, web templates, and reports in different output formats like PDF, Excel,
    XML, XHTML, and HTML
    How to see WAD reports on browser:
    The BEx Web Application Designer is a desktop application for creating Web applications with BW-specific contents. Using the BEx Web Application Designer, you can create an HTML page that contains contents such as various tables, charts or maps. This HTML page (Web application) provides the basis for not only Web applications with complex interaction, but also for Web cockpits and iViews.
    http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/content.htm
    Web Application Designer for Beginners
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22
    Web Application Solutions: A Designer's Guide
    http://www.lukew.com/resources/webapplicationsolutions.pdf
    http://sap.ittoolbox.com/groups/technical-functional/sap-solution-manager/bw-web-application-designer-1955944
    Feautures of WAD in 7.0
    http://help.sap.com/saphelp_nw70/helpdata/en/88/4d354277dcb26be10000000a155106/frameset.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6
    Regards
    Sudheer

  • Add caption to Analysis item in WAD7

    Hi,
    I used to add caption in WAD 3.x version, how ever, I am not able to find a similar option in WAD 7. Can any one tell me how I can do this in 7.x
    Thanks

    Hello Tanu,
    If you can enable the 'With Tray' option for the Analysis Item, you will be able to provide caption to your Analysis item.
    Regards,
    Pratap Sone

  • Bex Analysis item not scrolling

    Hi
    Can you help me with my WAD issue?
    I have a problem where in WAD, the Analysis item is not sctrolling when pressing button "page down", "page up".
    The only way to operate it is to manually type the page that you require.
    I marked, exactly what cause problem on attached picture.
    Thanks.
    BR
    Michal

    Hi
    Thank you for your answer, I just checked the report again, by selecting less amount of data. I have only 2 pages but buttons are still not working so it must be something else.
    That problem is only related to one report, where I am displaying two queries. Both queries have that same issue. I can not replicate that error on any other report, therefore I can conclude, that error is report specific.
    Do you have any other ideas ?
    Thanks.

  • Format in Analysis Item

    Hi Experts,
    I need to format in the analysis item for obtain a table without the right tittle area, I want to display a box kpi and characteristic deleting the grey area of tittle.
    The format desire is:
    The grey area            - Char 1   Value 1           -           Char 1 Value 2                 -
    with tittles deleted     -
    or change the color   - Char 2   Value 1           -          Char 2 Value 1                  -
    kpi 1                        -            XXXXXX             -            XXXXXXXXXXXXXXX           - 
    Then, just the area grey with char tittles i am needing not display.
    I can´t use the report designer for performance and the query type has several structures that the report  isn´t permitting.
    There is some solution with javascript or properties for obtain a format more plain without this tittles.
    Thank you very much.
    Regards,
    Jeysi

    Hi Jeysi,
    I have not done this so I can 't explain the functionality in detail. I will do this in nearer future...
    Here are some links which could be helpful:
    Analysis item: Set column width
    SAP Note Number: [1118502|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31313138353032%7d]
    -> Example is regarding the setting of column width...
    Examples of Modules
    http://help.sap.com/saphelp_nw70/helpdata/en/47/a864d059f51503e10000000a42189c/frameset.htm
    Re: Negative Values  - in Red Font
    I would implement in your case the examples provided by SAP described in [Examples of Modules|http://help.sap.com/saphelp_nw70/helpdata/en/47/a864d059f51503e10000000a42189c/frameset.htm] and [Using Modifications|http://help.sap.com/saphelp_nw70/helpdata/en/47/a061f612753377e10000000a421937/frameset.htm] to understand the functionality of using parameter modification.
    Other option is using the table interface (also described in the [thread|Re: Negative Values  - in Red Font]). Here is a howto guide:
    [Enhancing Web Reports Using Table Interface|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0b4cfcc-f9c1-2b10-1bb5-d4b61083d471]
    Instead of DATA_CELL take a look at CAPTION_CELL to change header...
    [BEx Web Interfaces in SAP NetWeaver BI 7.0|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0e35cde-2737-2b10-c9b2-b83956cf5ec3]
    Regards
    Andreas

Maybe you are looking for