Paging with custom page number

As the spry paging always start at the 1 page.
How can I make the spry start at a different page number
ex. 3 out of 5 instead of 1 out of 5
1,2,
3,4,5

Can you confirm that your custom page layout has the same WebPart Zones as the default one? They need to be if you wish to see content that was added with the default page layout.
Nikolas Charlebois-Laprade Microsoft Certified Professional & Software Engineer http://nikcharlebois.com

Similar Messages

Help with custom page size support for non standard paper

Firstly, we appreciate any support you may be able to provide, we have already thrown considerable effort at this and it has been very time consuming and frustrating.
To support a number of business functions need to print to (non standard) continuous and mulitpart paper on a dot matrix printer. The (test) Mac is a 10.4.11 G4 laptop, the printer is an Oki Microline 520 (9 pin 80 column, IBM Proprinter, Microline or Epson FX personalities with a parallel interface) which has been networked via a HP JetDirext Ex Plus print server. That part appears to be operating correctly.
We have tried a number of drivers / printer personalities with varying levels of success:
ESP / EPSON 9-Pin Series CUPS v1.1 / Epson FX personality
ESP / OKIDATA 9-Pin Series CUPS v1.1 / Oki Microline personality
Ghostscript / epsonc / Epson Dot Matrix Foomatic PPD / Epson FX personality
Ghostscript / ibmpro / IBM ProPrinterII Foomatic PPD / IBM Proprinter personality
Ghostscript / okiibm / Oki Microline IBM compatible 9 pin Foomatic PPD / IBM Proprinter personality
There were no appropriate drivers in Gutenprint (5.2.3 version) The most successful is the okiibm / Oki Microline IBM compatible 9 pin settings, it can print A4 and honors the Printer Features Resolution settings in the print dialogue.
Q1: Should we see anything in the Printer Info / Installable Option, it is always blank ?
The issue is custom page sizes, we can manage / add Custom Pages Sizes via the Page Setup / Paper Size interface and they draw on the screen OK but they do not work at the printer (various issue at the printer such error messages, junk printing and wrong orientation):
Q2: Are we heading in the right direction or is there a better way to handle this ?
Q3: Would 10.5 solve all our problems, are the print drivers any better ?
Q4: Is this the correct way to specify custom page sizes, is this all we need to do ?
Q5: Is so how do we get the driver to respect the size, do we need another filter or something ?
Q6: Is it possible to add (by hand) custom page sizes to the ESP drivers or Foomatic PPD files so they they appear as a "standard" offering in the Page Setup / Paper Size interface ?
Sorry for the long / complicated post and thanks in advance for any advice / assistance.

Matt Broughton wrote:
Testing on 10.5.7, Tried both Oki 9-Pin Series 1.3 / Microline personality (no joy) and Epson 9-Pin Series 1.3 (this is a much better driver than 1.1) / Epson FX personality but not much joy with custom page sizes,
The Oki 9-pin Series 1.3 and the Epson 9-Pin Series 1.3 should produce the same results. The only difference in the PPDs is the printer model name.
After some testing, I find that the output is not the same despite the two PPDs being virtually identical. I did spot in the CUPS source code for the rastertoepson filter that there is some model name matching for Epson printers. Thus I can see where the output using the Oki 9-pin PPD could be different than when using the Epson 9-pin PPD.
but again once I imbedded the page size into the ppd some (but frustrating) luck. I can get it to respect the paper orientation and it prints well but I could not get the form length to work properly. At best over a print run of 7 labels it would creep up the label by about 0.1 inches / 2 mm.
Just for the fun of it, I made some additions to the Epson 9-pin 1.3 PPD. All I can say is that I could print a job to file. I have no way to know what it would look like on paper.
I did find that using a custom paper size did add some unwanted margins to the output bounding box. Putting the custom page size into the PPD seemed to get around that issue.
I added the following lines to the Epson 9-pin PPD 1.3--
<pre style="overflow: auto;font-size:small; font-family: Monaco, 'Courier New', Courier, monospace; color: #222; background: #ddd; padding: .3em .8em .3em .8em; font-size: 9px;">*PageSize Label1/Label1: "<</PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
*PageRegion Label1/Label1: "<<PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
*ImageableArea Label1/Label1: "0 0 288.00 107.80"
*PaperDimension Label1/Label1: "288.00 107.80"</pre>
This adds a paper size with the 4 inch (288pt) width and 1.5 inch (107.8pt) height. That represents the 1.4 inch label and the 0.1 inch gap between labels. I set 0pt margins except for the bottom where is set the 0.1 inch (7pt) gap as the bottom margin.
The full diff in context is--
<pre style="overflow: auto;font-size:small; font-family: Monaco, 'Courier New', Courier, monospace; color: #222; background: #ddd; padding: .3em .8em .3em .8em; font-size: 9px;">loki:~ matt$ diff -u /usr/share/cups/model/epson9.ppd ~/Desktop/epson9.ppd
--- /usr/share/cups/model/epson9.ppd 2009-02-20 20:16:53.000000000 -0600
+++ /Users/matt/Desktop/epson9.ppd 2009-06-06 20:37:06.000000000 -0500
@@ -42,6 +42,7 @@
*PageSize Legal/US Legal: "<</PageSize[612 1008]/ImagingBBox null>>setpagedevice"
*PageSize A4/A4: "<</PageSize[595 842]/ImagingBBox null>>setpagedevice"
*PageSize FanFoldUS/US Fanfold: "<</PageSize[1071 792]/ImagingBBox null>>setpagedevice"
+*PageSize Label1/Label1: "<</PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
*CloseUI: *PageSize
*OpenUI *PageRegion/Media Size: PickOne
*OrderDependency: 10 AnySetup *PageRegion
@@ -50,17 +51,20 @@
*PageRegion Legal/US Legal: "<</PageSize[612 1008]/ImagingBBox null>>setpagedevice"
*PageRegion A4/A4: "<</PageSize[595 842]/ImagingBBox null>>setpagedevice"
*PageRegion FanFoldUS/US Fanfold: "<</PageSize[1071 792]/ImagingBBox null>>setpagedevice"
+*PageRegion Label1/Label1: "<<PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
*CloseUI: *PageRegion
*DefaultImageableArea: Letter
*ImageableArea Letter/US Letter: "18.00 18.00 594.00 774.00"
*ImageableArea Legal/US Legal: "18.00 18.00 594.00 990.00"
*ImageableArea A4/A4: "18.00 18.00 577.00 824.00"
*ImageableArea FanFoldUS/US Fanfold: "18.00 18.00 1053.00 774.00"
+*ImageableArea Label1/Label1: "0 0 288.00 107.80"
*DefaultPaperDimension: Letter
*PaperDimension Letter/US Letter: "612.00 792.00"
*PaperDimension Legal/US Legal: "612.00 1008.00"
*PaperDimension A4/A4: "595.00 842.00"
*PaperDimension FanFoldUS/US Fanfold: "1071.00 792.00"
+*PaperDimension Label1/Label1: "288.00 107.80"
*MaxMediaWidth: "1080.00"
*MaxMediaHeight: "86400.00"
*HWMargins: 18.00 18.00 18.00 18.00</pre>
I don't know if that will help you or not. Let us know what sort of progress you make.
Matt

Can not create template based page with customized page type.

I built a customized page type (with persepective attribute) and wanted to build pages with this type. If the new pages do not based on any template, it works fine. However, if I wanted to use a template, the page type was set back to "standard"!
Steps to reproduce it:
1. create a new page type - test page type.
2. create a new template = test template.
3. create a new page - test page.
3.1 choose the page type to be "test page type"
3.2 fill in the form including the new attribute info.
3.2 choose the page template to be 'test template"
3.3 click finish
4. click the properties of "test page", it shows that the page type is "standard" and the new attribute information is gone!
If in step 3.2, no template is chosen, the properties of the new page shows the page type is "test page type".
I tried to find a workaround.
1. create a page with "test page type".
2. covert the new page to template.
I got this error message:
Error while copying page. (WWC-44262)
(WWC-00000)
Looks like customized page type and template can not coexist. Is this a bug?

How long should the upgrade take? And should it be attempted on a production (infrastructure on machine 1/middle-tier on machine 2) Windows 2000 architecture? Or should be wait for 9.0.4? Or ... should I ask this in a TAR? Thanks!
Mike

Can not build a template based page with customized page type.

I built a customized page type (with persepective attribute) and wanted to build pages with this type. If the new pages do not based on any template, it works fine. However, if I wanted to use a template, the page type was set back to "standard"!
Steps to reproduce it:
1. create a new page type - test page type.
2. create a new template = test template.
3. create a new page - test page.
3.1 choose the page type to be "test page type"
3.2 fill in the form including the new attribute info.
3.2 choose the page template to be 'test template"
3.3 click finish
4. click the properties of "test page", it shows that the page type is "standard" and the new attribute information is gone!
If in step 3.2, no template is chosen, the properties of the new page shows the page type is "test page type".
I tried to find a workaround.
1. create a page with "test page type".
2. covert the new page to template.
I got this error message:
Error while copying page. (WWC-44262)
(WWC-00000)
Looks like customized page type and template can not coexist. Is this a bug?

How long should the upgrade take? And should it be attempted on a production (infrastructure on machine 1/middle-tier on machine 2) Windows 2000 architecture? Or should be wait for 9.0.4? Or ... should I ask this in a TAR? Thanks!
Mike

Custom Master Page with Custom Page Layout

Hi All,
I have created a Custom SharePoint Master Page. In that Master Page I have created a custom Header & Footer. In between the header and the footer I created a space to put page's content.
However I have created a page using that master page and it was successfully published.
After that I wanted to create a Custom Page Layout using that Page previously created. That also was a successful one. But when default Page Layouts in SharePoint 2013 inserted to a page it shows an area that can add content. But in my Page Layout inserted
to a page it does not show like that.
So what have I missed when I created the Custom Page Layout? Could you kindly someone tell me how to solve this matter?
Thanks and regards,
Chiranthaka

Can you confirm that your custom page layout has the same WebPart Zones as the default one? They need to be if you wish to see content that was added with the default page layout.
Nikolas Charlebois-Laprade Microsoft Certified Professional & Software Engineer http://nikcharlebois.com

Automatic numbering - not with actual page number

I am doing a book that has aboubt 20 pages and then about 100 with recipes. I want to have a heading with Day 1, Day 2, Day3. I will be appying a master page to the recipes, but I want to do an automatic day number. If I do the insert page it labels it to the actual page number. Any way I can do this? CS4

You can set any starting page number you like, in the Pages panel under "Sections and Numbering".
InDesign will complain if you already have pages numbered "1", "2", "3" (and you probably have, since you didn't know how to change the page numbering). It's correct in complaining too, because what page should it print if you type in "1" in the Print Dialog? Two further options, here: use absolute numbering (which is the real, actual page n in your document, irregardless of what it shows as "the" page number); or set the initial part of your text to be numbered in Roman numerals, so they count "i", "ii", "iii", and your Days will be numbered as usual. (Uh, with that I mean the page numbers.) Changing the numbering to Roman is also in the Pages panel menu.

Open flash file in SharePoint with custom page

Dear Team,
I have a document library with .swf files, by default, if the browser has flash related plugin, the file would be opened in browser directly, if the browser has no such plugin, the file would be downloaded to local.
To avoid downloading and opening the document in client local, I would like to use my customized page to open the .swf file when clicking it in library.
Any way to do this?
Thanks,
Qiao Wei
My blog:http://blog.goobol.com

Hi,
Please check below
http://www.robertkuzma.com/2010/08/unable-to-open-flash-or-html-page-in-sharepoint-foundation-2010/
http://www.sharepointdiary.com/2010/05/using-flashswf-files-in-sharepoint.html
Please remember to click 'Mark as Answer' on the answer if it helps you

Customizing page number function wanted

Dear all,
Is it possible to have a more user-friendly 'Number pages' function to customize page number in the next update? The current 'Number pages' function is very limited. It would be great to have options like printing options, e.g., reverse the page order, select odds or even pages etc. After renumbering, realign the renumbered pages in a ascending or descending order. This could be done by printing the pdf to a new pdf but if there are pages with different size in one pdf file, it would be another chaos. Anybody, including developers, have a solution please? Thank you in advance!
Sincerely yours,
liy_ggm

But it's not a word processor - it's a text editor and they're not the same thing. It exists as some sort of bridge between the traditional unix editors (try opening a Terminal and then type "emacs" or if you're really feeling hot "vi" to see what those are like) and a word processor. It's close enough in appearance to a word processor that I can see how you'd expect w.p. features, but they just aren't there. For real word processing functionality use a word processor; Appleworks or somehting else.

Page size printing problems with custom page size I created

I have created a custom page size (very small) for printing an advertise I had to print, and now after that operation all the pages I ask to print to any printer are automatically printed in that setup, and sometimes even if I change to A4 manually, the page changes but the borders of the page still remain the old one (result i can not print). How can I cancel the custom page size I created, so that my printers restart to print automatically in A4?
thank you very much

I have created a custom page size (very small) for printing an advertise I had to print, and now after that operation all the pages I ask to print to any printer are automatically printed in that setup, and sometimes even if I change to A4 manually, the page changes but the borders of the page still remain the old one (result i can not print). How can I cancel the custom page size I created, so that my printers restart to print automatically in A4?
thank you very much

Word 2011 for Mac Issue with Custom Page Size

I have installed Microsoft Office 2011 for Mac on my brand new iMac. I'm using Microsoft Word 2011 for Mac and I have opened the "Word Publishing Layout" template (this is essentially Microsoft Publisher). I'm trying to set up custom page sizes by performing the following steps. I go to File --> Page Setup and use the following settings:
1. Settings: Page Attributes
2. Format For: Any Printer
3. Paper Size: I choose "Manage Custom Sizes"
4. I create a 24x36 page and save it
When I do this, Word 2011 (and Word 2008) for Mac will only go to a maximum of 22 inches wide and 22 inches in height. Is there any way around this? I need the big sizes to do digital proofs for my business. I don't want to scale down to 12x18 (essentially cutting the proof by 50%) because when I import it into my other program that can accommodate any size document, I have to do a lot of manual work to get things back to scale. Thanks in advance for your help. If we can figure this out, I'll be grateful.
AC

Please re-post on the Office for Mac Product Forums

Creating publishing page in specific folder and with custom page layout using JSOM

Hi!
I have a site collection under my root, in which I have a page library with a folder inside. I want to create a publishing page inside the folder using JSOM. The API provides the following information on the three possible ways of how you can create a publishing
page.
PublishingPageInformation with all defaults.
PublishingPageInformation.Name and PublishingPageInformation.PageLayoutListItem.
PublishingPageInformation.Name, PublishingPageInformation.PageLayoutListItem and PublishingPageInformation.Folder.
Source - SP.Publishing.PublishingPageInformation Properties (sp.publishing)
Since I want to create the page in a specific folder in the page library, I have to go for the last option.
I have a function call chain that look as follows:
getLanguageID(webUrl, languageID)
.then(function(resolveVal) {
language = resolveVal;
return checkPageExist();
.then(getEditorialNewsFolderJSOM)
.then(getAssociatedPageLayoutListItem)
.then(addPublishingPage)
The first two methods,
getEditorialNewsFolderJSOM
getAssociatedPageLayoutListItem
fetches the required data as SP.Folder- and SP.ListItem-objects.
The problem occurs when
addPublishingPage
is called. This method, in turns calls this function.
var pageInfo = new SP.Publishing.PublishingPageInformation();
pageInfo.set_name(publishPage.title);
pageInfo.set_pageLayoutListItem(pageLayoutListItem);
pageInfo.set_folder(editorialNewsFolder);
pageCreationContext.newPage = pubWeb.addPublishingPage(pageInfo);
clientContext.load(pageCreationContext.newPage);
clientContext.executeQueryAsync(function() {
publishPage.isPageCheckOut = true;
resolve();
}, function(error) {
reject(precio.intranet.resource.errCreateContent_addPublishPage);
The error happens when this function is called with the page information object.
SP.Publishing.PublishingWeb.addPublishingPage(pageInformation)
Error:
Cannot read property '$2t_0' of undefined
and it happens in SP.Runtime.js.
I've tried this
sample code from the MSDN-team, and added the pagelayout and folder properties, but it renders the same error.
Creating a page directly in the page library with a blank SP.PublishingPageInformation object works perfectly fine!
What could possibly be wrong? The error isn't something that I can debug myself since it happens in SP.Runtime.js, and the documentation for this is very sparse!
Any help on how to resolve this issue would be helpful!

Hi Vinay,
This may be useful:
https://blogs.oracle.com/jdevotnharvest/entry/remote_task_flow_vs_wsrp

Issue with Customer Material Number in sales order

Hi All,
I am facing one strange issue.
Accoding to the flow of my client system the customer Material number is automaticlly populated while creating the line item in sales order. The Customer Material number come from the Configuration of the Item.
This is working properly in the quality system but in the prodcution system for some cases this customer material number is not coming.
The customer material is not coming in production only some times other wise it works properly.
I am not able to understand what may be the issue as it is working properly in the quality and in the procudtion it is not coming only for some line item.
Kindly help.

That depends on either configuration used in your system or any enhamcement used.
So check the cases for which they have configured it or used any enhancement.

Problem with showing page number

Hi, need a little help please.
I changed without intention some settings or something but I can not fix it. I have documents (book chapters) that do not start with page 1 but wit 230 or 130 or some other number, But in the pannel where you ca see the pages or master pages, I see the only pages starting with 1 (as in "the first page of that document and so on". On some other computer, no problem, the same file shows in that pannel the corect number of the page.
Can somebody please help and tell me how to corect this?
I almost forgot; I work under Windows and with InDesign CS3.
Thank's for helping,
IonP

Hi Steve,
Thank's for your help. You were right. My settings were on "Absolute Numbering" instead of "Section Numbering".
I did search for different settings in the first place, it was the obvious thing to do, but I did it in the wrong place. I searched in "Layout > Numbering & Section Options" instead of "Edit > Preferences...".
Thank's again, it was very annoying to work this way.
ionP

How do I start with a page number other than 1?

I am writing a book and have each chapter in a separate Pages file. I figured out how to insert page numbers. But how do I start a chapter with page numbers starting at say, page 22, rather than page 1?

Use the section tab of the layout inspector.

How do I set up new Document Profile with custom page sizes?

I see that different profiles have different sets of page sizes. I need a set of page sizes which I use often, and I would like to create a set of these sizes in a new profile, or at least somehow add them to the very minimal set of page sizes which can be selected when setting up a new document. Can this be done?

Thanks Jerron, I have done this but it only adds one document at one size to the list of presets. The list of sizes that comes with it is the same as the preset it was created from originally. What I would like to do is add to the list of sizes which comes with any one of the document presets or create a new one with a new list of sizes.

Paging with custom page number

Similar Messages

Maybe you are looking for