Panasonic sd5 question

i have a panasonic hdc-sd5 that works well imovie08. i do have problems findings compatible sdhc card. i was wondering if people encountered the same problems. so far i've gone through 5 cards (1 kingston 8gb class 6, 1 transcend 8 gb class 6, 1 transcend 4gb class 6 and 2 crucial 4 gb class 6) and only the 4 gb transcend has worked for me so far? Any is it bad luck with cards or is there something wrong with my camera? Sorry, that this is really not an imovie question, just think of this post s another fyi that the camera works well with imovie08.

I really appreciate your help and have found a lot of your other post really helpful in the past. I think I'll try a panasonic sdhc card first, since I do have that 1 transcend 4 gb card that works well with it. I've read in other fora that many class 6 cards are of poor quality these days and I'd like to avoid sending the camera back to panasonic if I don't have to. Additionally, if the panasonic card fails me, then panasonic cannot claim that I am not using recommended card.

Similar Messages

  • Panasonic SD5 and Sony CX7 - Fluid Motion or Stuttering?

    So I am a backcountry skier and I've been looking for a new video camera and have narrowed it down to the Panasonic SD5 or Sony CX7 as these seem to fit my needs (high altitude use, cold environments, light weight, size, reliability and shock resistance) best. The problem is that I have downloaded many sample clips from various sites and many samples exhibit the same problem...motion is "stuttery" versus fluid. Keep in mind that since iMovie won't let me import the files, I must convert to Quicktime using Voltiac.
    When you hook up your CX7 or SD5 directly to your HDTV, is the motion smooth, similar to a conventional camcorder? When you import the video from the camcorder to iMovie 08, how are your movies and DVDs turning out? Of course if you have any sample video posted on the web, that would be great to check out.

    They shoot 60fields per second which renders fluid motion of conventional TVs, so that won't be a problem. But iMovie 08, unless you are using the high end Mac Pro with powerful graphics card, will discard one field of your 60i footage for real time performance. This will make your footage only the half temporal resolution and fast motion would look will look stuttery. In short, don't use iMove 08 for fast motion footage if you want fluid motion.

  • FCE 4 with Panasonic SD5

    Hi folks. I thought I'd share my experience so far using FCE 4 with AVCHD material on a Panasonic SD5.
    Getting material into FCE4:
    It works. Just plug in the camera, go to "Log and Transfer," and you can select and import any video from the camera. It's also possible to preview and trim the material you want to import, but it's at normal playback--no quick scrubbing while you're still looking at native AVCHD files on the memory card. Importing/ingesting is done through Apple's Intermediate codec, which means transcoding that takes some extra time and a lot of extra drive space.
    Working with material in FCE:
    I'm able to work directly--no rendering required--on the material transcoded when shooting in HN and HE (1440x1080) mode. I end up having to do an additional render on imported material taken in HG (1920x1080) mode, though I'm not sure if that's unavoidable or caused by a mistake on my end in the settings.
    All in all, I'm happy with the performance, and I'm glad Apple finally got this feature added to FCE so that us AVCHD folks didn't have to keep suffering through iMovie 08 or convoluted codec workarounds.

    Hi dc John,
    best regards from Germany. I have had the problem to get the data from my SD5 into my Mac Book Pro for a couple of weeks. Yesterday I saw your hint and everything works. Thanks again.
    Now a new challenge is coming up. Everything works as long as I read my data into the Mac from the Card reader. BUT: I also copied the complete content of the SD card onto my hard disk. When I try to get the data into the Mac by log and transfer it does not recognize the .mts files.
    Do you have any idea what I am doing wrong.
    Any help appreciated very much.
    Mac freshman
    Message was edited by: Mac freshman
    Message was edited by: Mac freshman

  • Panasonic SD5 & Video Storage

    Alright, I took the plunge and purchased the Panasonic SD5 -- and got the free burner at Circuit City Friday night.
    I spent some time yesterday playing around with it. I really like this unit. It replaces a bulky, tape based Sony HD camera I got 18 months earlier.
    I took around twenty minutes of video. The playback on a 50" HD TV from the camera direct was impressive. I also had no problem importing and editing the video in iMovie 08.
    I burned a DVD disc with the provided burner -- again no issues. I know that the resulting DVD is not able to be played in a standard DVD player -- and that some new Blue Ray players will support this disc output.
    Here is my issue -- and maybe it is because I haven't spent much time with it.
    The card used only about 1 gig for the 20 minutes of video. AVC format I understand is variation of MPEG 4 -- .264 codec. When iMovie 08 converts it to an event -- the file size explods to a whopping 5.5 gig folder!!!! This is with the reduced video import option (the iMovie recommended "large" size). God only knows how big the files would be with the unreduced size checked instead.
    Imovie 08 reads the video from the card just fine -- but the burned DVD with the video on it, it simply cannot recognize. If I copy the video files from the card to my hard drive -- it is likewise unable to use this video. So then what happens when I erase the card? I can't justify saving 15 gig files per hour of video. I shoot 1-2 hours of video each week.
    I think the idea of the DVD burner is to use it a storage option. However, If I cannot access the video on the DVD, it is of no use to me.
    Help -- or I am afraid I am going to have to return to tape storage. What workflow and storage have other SD5 owners found works best?

    Hi,
    Yes the amount of data of the expanded files is huge. At full res it is approx. 1GB per minute. So you either need a extremely large disk array or you can do the following:
    - I have been burning the contents of the SD card to a DVD. I use a 4GB card so copying to a DVD that holds a little over 4GB works nicely. Then when I want to work with the videos I need to import them into iMovie or FCP. I just insert my DVD and then run iMovie (Order does matter). iMovie recognizes the DVD and thinks it is a camera so it will then let me import it just like the camera.
    - You can also create a disk image on your harddrive and copy the items from the SD card to that. Then when you want to import them you just mount that image and then run iMovie.
    It would be so great if iMovie and FCP worked directly from the AVCHD format without having to convert it to AIC (or Pro Res 422 in FCP). But they do not allow that.
    Hope that helps.
    Jeff

  • Panasonic SD5 and G5 PPC iMac

    Hi, I am looking to purchase the Panasonic SD5 HD camcorder as I hear its great.
    One problem, I read that I cant use it with my G5 PPC iMac as it doesn't accept AVCHD. Is there no way around this - so do I really have to buy an Intel based mac????
    Hoping you can help!
    thanks
    Mark

    I can't believe I have to buy a new Intel Mac to use a HD camcorder - Apple, c'mon, there must be something you guys can do - you're clever, you make nice things...

  • Import 1920x1080 from panasonic sd5

    Importing 1440x1080i avchd footage from Panasonic SD5 is fine.
    BUT iMovie08 change my 1920x1080i footage's height aspect ratio when it's being imported.
    My wife is now looking like a FATTY woman in my iMove08 project 8>
    Anyone can help me?

    I went out and bought the SD5 last night. I have only had a few minutes to do some tests. I took some footage in the full 1920x1080 and some in the 1440x1080. I have not tried connecting the camera to my Mac Book Pro, but did connect the USB card reader that came with the 4GB SDHC card. When I ran iMovie 08 it recognized that card as a camera and went to the import screen. I was able to import my photos. So I guess the short answer is that the SD5 will work with the new iMovie. When it imports the clips they are much larger than the AVCHD versions. It imports them as AIC format.
    Now as was mentioned in this thread there is some caveats when importing. For all the full 1920x1080 clips it imported them as 2560x1980 an the 1440x1080 clips were imported as 1920x1080. This was a little annoying, but when I shared using export to Quicktime I made sure I just changed the size to 1920x1080 for the ones that were 2560x1080. The exported movie looked fine again.
    I do like the higher res and random access capability of the AVCHD camera vs a tape one. But I have to get use to that importing the clips takes longer than the clips. Whereas with tape the import is 1:1 with the length of the clips. So I guess it is a trade off of convenience of picking the clips you want vs a faster import on tape.
    Also you better have a lot of HD space. These clips get very large when they are imported. A 20 sec clip was approx 200MB when imported. I will have to play with this to see if there is anything I can do with it.
    I do like that the card was recognized as the camera in my card reader so i do not have to connect the camera every time. I will have to try connecting the camera though to see if that does work. My next test is to see if I can copy the AVCHD files to a DVD and use that as an archiving step for my clips. I hope the DVD will then be recognized as the camera and I can import from the DVD since that is cheaper to backup the clips than having many SDHC cards.
    I hope that apple puts out an update that will fix the 2560 problem. I assume they will at some point. It is annoying to have that.
    Sorry for the rambling but I thought this info may be useful. I will try to post more info.

  • Panasonic hdchs900 Question

    I had a quick question.  We are shooting a movie with a panasonic hdchs900.  What is the best format to shoot the highest quality movie?  We will be showing the finished product at a theatre and selling it as DVDs.  A good deal of the editing will be done in FCP7.

    Hi
    The highest quality (according to Panasonic) is 1080P50 (or 60) I'm in PAL land. so I'll talk PAL for now. The problem with this is that Log and Transfer won't recognise the non standard frame rate,  you will have to convert to Pro Res before importing into FCP.  You then have the choice of leaving the frame rate at the original or changing to 25 fps during conversion, and a further choice of editing 50fps  in a 25fps timeline or in a 50fps timeline Converting to 25 fps later.
    Of course the other option is to shoot at a slightly lower quality at 25fps but I think that camera only has the one progressive setting which is the one we've just talked about, I believe all the others are interlaced although 1080 is one of them.
    DM

  • Panasonic SD5 or Sony CX7

    Looking for a new HD flash based camcorder and would like some opinions on which would work better. Like that I can use existing SD cards that already own in the SD5, but also like the fact that the Sony can utilize the Bluetooth Mic. which would be nice for recording kids events. Will use mostly for shooting kids and their school and sporting events including baseball, Soccer and Hockey.

    They shoot 60fields per second which renders fluid motion of conventional TVs, so that won't be a problem. But iMovie 08, unless you are using the high end Mac Pro with powerful graphics card, will discard one field of your 60i footage for real time performance. This will make your footage only the half temporal resolution and fast motion would look will look stuttery. In short, don't use iMove 08 for fast motion footage if you want fluid motion.

  • Panasonic SD5 saving imovies

    I am so pleased with the sd5 which works seamlessly with imovie with "ner a hitch"
    Further it gives great images and sound.
    Now I think I am asking a little too much!
    Does anyone know if after I have made my imovie 08 movie with titles etc can I then save it back to sd card in an avchd format the camera understands.
    If I can bingo! I will be able to use the video cameras HDMI output to show my edited HD movie. At present I am stuck with a well edited but SD IDVD video or the raw AVCHD data from the camera, Neither is ideal.

    Agreed. This utility would be invaluable.
    HMMMM! Edited video on sd card with the sd5 playing it.
    I'm sure there is all kinds of commercial reasons they dont want you to do this!
    ps I didn't think that apple had any compatible blu ray writers.
    If I could write to bluray problem solved.
    The DVD solution is elegant but 20 mins is too short.
    Do you think that a Dual layer disc would be compatible allowing 40 mins?
    If so I might nick out and buy a ps3!
    Finally is there a way to convert my many " large" format movies back to 1080i format without physically having to reimport the original SD5 footage(backed up thank god!) and go through the pain of reediting them (SEVERAL are 35 mins long).
    I wonder if you can retain all of your editing instructions but suck the video back in in HD?
    Message was edited by: shuggyboy2
    Message was edited by: shuggyboy2

  • Difficulty importing clips recorded in "pre-rec" mode on the Panasonic SD5

    Anyone have this issue? I couldn't find any topics on this.
    iMovie 08 cannot import clips that I've recorded in the SD5's pre-rec mode. The clips just show up as a grey film strip in the import window. The clips recorded with pre-rec mode OFF show up fine and import fine.
    Thanks!
    -MP

    The way Pre-Rec mode is supposed to work...The camera is on and taking video. It always maintains the last three seconds in memory. When you hit "Record" (and shift into regular recording mode) you also have the last three seconds before you hit record.
    This is so you don't miss anything while trying to hit the record button. Imagine trying to film the start of a race. You could hit record 20 seconds before the starting gun, just so you don't risk missing the start. With preview mode, the camera is on and has the last three seconds in memory. When you hear the starting gun, you would still have time to press RECORD and have the start of the race.
    If you filmed a bunch of stuff in PRE REC (without hitting RECORD), my guess is that it is gone forever.

  • Panasonic remote question

    Will the touchpad remote control that comes with the Panasonic blu ray BDT320 work on the Panasonic plasma UT?

    Hi
    The highest quality (according to Panasonic) is 1080P50 (or 60) I'm in PAL land. so I'll talk PAL for now. The problem with this is that Log and Transfer won't recognise the non standard frame rate,  you will have to convert to Pro Res before importing into FCP.  You then have the choice of leaving the frame rate at the original or changing to 25 fps during conversion, and a further choice of editing 50fps  in a 25fps timeline or in a 50fps timeline Converting to 25 fps later.
    Of course the other option is to shoot at a slightly lower quality at 25fps but I think that camera only has the one progressive setting which is the one we've just talked about, I believe all the others are interlaced although 1080 is one of them.
    DM

  • 1.Need for external burners for Panasonic sd5? General grumbling!

    1.Has anyone tried writing an avchd film from the mac HD back onto the sdhc card or indeed another sdhc card via a card writer. If it is possible to rewrite such archived avchd files back onto sd then successfully display them on a HDtv using the camera itself it rather makes a mockery of the whole dvd writer thing. If such cards arent recognised by the camera then it may be worth considering. Unfortunately those of us on the expensive/ ripped off side of the pond have no such free writer bundles such as that seen at circuit city- GRRRRRRR
    Im also willing to take bets for how long it is before a smart encoder develops a way for us to use a universal binary mac friendly AVCHD specific editing programme which may put imovies to the sword. Hopefully the Jobs team will realise that they have missed a step in technology and get back to the cutting edge which is after all ahy we choose mac. A little more attention to the core computer market and a little less to phones might restitute this developing problem. At present PCs are starting to offer all this- ulead etc and Im not used to being outclassed in this way!

    If I understand you correctly.
    You have limited space on the SD cards and limited cards, so at some stage you will need to erase them and your only means of playing HD content is from your camera. You wish to copy the AVCHD files from the camera to your mac for storage and at some point be able to put them back onto the card to play from your camera.
    Personally I'd try it, you have nothing to lose, providing you have a spare card. Disk images do work for many but not for all it would appear, I assume you can use replace the files and file structure back to the card if you have a working disk image. To find out if you have a working disk image, try mounting it and see whether imovie sees it as a camera or not.

  • MacBook Pro (March 2008 Model) AVCHD has stopped working from my SD5

    I'm seriously perplexed here. I have just upgraded my MBP to the latest top spec 15", done a data migration and my FCP 6.0.2 had stopped working with my Panasonic SD5! Bizarre!
    So - complete erase and install of 10.5.2 and re-installed FCS2 and....still won't work! Have tried everything. Why has it suddenly stopped working with a camera is used to be fine with.
    The SD card is mounting. The .mts files are good (Voltaic HD will see and convert them). FCP 6.0.3 seems to be fine in all other respects. Open Log & Transfer window though...and nothing!
    AHHHHH! Just about to go traveling for three months and can't use my camcorder!!!!

    Perian 1.1 does not help, though I see a lot of people have used it to get the SD9 working. I have an SD5 which did work fine and now doesn't. As an update to the situation, I have now discovered that it will actually see my SD5 if I leave the Log & Transfer window up for about 4-5 minutes. The clips just suddenly appear and I can ingest them, however, if you close the L&T window down and open it up again - you have to wait another 5 minutes for the clips to appear. It is not the camera (I have tried it at work) - freshly installed 10.5.2 (erase and install) and fresh FCS2 (doing incremental updates from 6.0.1 to 6.0.3 and checking in between) The only thing I can think of is that these new MacBook Pro's have firmware version MBP41.00C1.B03.

  • Panasonic GH1 - AVCHD 720 60P Project

    I ordered a Panasonic GH1 and I intend to use the AVCHD 720 60P mode.
    I understand that its probably using coding with H.274 Main Profile Level 4.0 at 17Mbps.
    I already downloaded some sample videos but I cannot edit them in this mode.
    1) How do I create a AVCHD 720 60P project? I cannot find such a preset?
    2) Since I do not want to loose any image quality, I only intend to cut / assemble my clips with very limited editing hoping that I can re-export with minimal re-coding in exactly the same format, profile, bit rate, etc... How can I do this?

    Well, I'll be more specific then - I was reluctant to appear to be using Adobe's forums for touting the features of competitive apps, but at the end of the day nobody in their right mind would say that, for all people and for all purposes, progam "A" is better than program "B" for editing video.  It depends on what you in particular are wanting to do, the style in which you are wanting to do it, and the source device (camera / camcorder) and host PC that you are using.  In reading the following, Your Mileage May Vary!
    Currently I have PE7, Pinnacle Studio 12.1 and Cyberlink PowerDirector 8 (just released) on my PC.  And Nero 9.  My source video comes from Panasonic SD5 and Panasonic GH1 devices, in AVCHD format.  The former is 1080 and the latter does that and 720 as well.
    In brief, my personal views on these are as follows:-
    PE7 - a much more "pro" interface than the others, and I like some of the details like being able to use separate audio and video transitions.  But it doesn't like the 720 footage from my GH1, and it doesn't create AVCHD DVDs which are my preferred output medium (highest quality at lowest cost, as compared with blu ray).  There are ways around this that I've described some months back, and possibly some even better ways that I really should document some time (using freeware) but it's a pity it's not built in.
    Studio 12.1 - An interface that seems targetted at kids rather than adults, and the way it goes about some aspects of video editing don't suit my personal approach.  It handles all the types of AVCHD that I've tried it with and creates AVCHD DVDs directly with menus, but it's due for an update in terms of its efficiency in handling AVCHD - you need a PC with clout to get a fluid feel when working on the timeline.
    Nero 9 - Has the ability to smart render some (by no means all) AVCHD footage, so if you simply want to edit with no bells and whistles, you can do so and then render to AVCHD file or AVCHD DVD in the time taken to copy the data - no processing happens, and no quality loss is involved.  If I was running a newsroom I'd be sending out my teams with cameras that took Nero-compatible footage and do the editing really fast in Nero ready for the next news bulletin.  But I'd hope no effects etc were required as that's not what Nero is good at.  IT handles GH1 AVCHD footage of both resolutions but only smart renders 1080.
    PowerDirector 8 - this can use the processing power of certain Cuda-compatible (and other) graphics cards to give a significant boost to AVCHD playback and rendering performance.  On my 9300 quad core PC I've got it to play four rotated picture-in-picture images on top of a base image all sourced from AVCHD before the PC maxed out performancewise.  It really does make it unnecessary to transcode to something else for effective editing (though you still need a pretty up to date PC).  It accepts GH1 AVCHD (both resolutions) and outputs to AVCHD DVD with menus (and to the other formats you'd expect) but it's smart rendering capability does rather vary with the source - my AVCHD devices don't seem to be on its smart rendering list.  However, rendering is significantly faster than with other apps I've tried and I think the quality is good - though some people on the Cyberlink forum don't agree.  As I said, YMMV.  It has some nice features but the most childish-looking interface of all of them - quite embarrasing to use.
    I guess my ideal program would combine the pro look of Premiere Elements, the efficiency of PowerDirector 8, and the smart rendering of Nero.  One day...
    Never buy a video editing app on someone else's recommendation.  Try before you buy on your system using your footage.

  • Tapes or mini DVDs?

    I use iMovie to edit for my websites and to prepare footage for DVDs to preserve family history. I'm going to purchase a new camcorder. Two questions:
    Should I purchase a HD camera?
    More important: should I purchase a camera that uses tapes or mini DVDs for best results?
    Thanks!

    Very nice!
    But doesn't the light coming through the window make it difficult to see your laptop screen? (..perhaps you close the curtains..)
    Like AppleMan, I (sometimes) use a Panasonic SD5. But because it's lightweight, and the few controls are all grouped together, I find it a bit "fiddly" and a bit wobbly to use. For anything serious I prefer the weight of a miniDV (tape) camcorder. Many of them have a proper pressure-sensitive vari-speed rocker button for zooming, too, instead of the rather awkward left/right slider zoom as on the Panny.
    I also generally still use older PowerPC Macs, and the AVCHD format of the newer camcorders takes longer to import (..on my Intel Mac mini..) than the less compressed standard miniDV format or the similar hi-def HDV-tape format. And I can't import AVCHD (..the format used by the little Panny..) on a non-Intel Mac, unless I use some third-party software to reformat it into the kind of video which iMovie can handle.
    So for "snapshot" quick'n'simple "family having fun" movies I may use the Panny SD5. For more "important" weddings or other special events or "serious" shots I use a tape-based camcorder, like baexandre's Sony camera, or something with a few more manual controls on it (..for adjusting the incoming audio, etc..)

Maybe you are looking for