Panic: couldn't reserve the lopage pool: not enough lo pages

I had used my Mac Book Pro early yesterday evening, worked fine.
But later last night, when I opened the lid, it was like a gray screen descended over the screen and large black dialog centered on the screen said, "You need to restart your computer. Hold the power button down..."
When I restarted it, the laptop didn't come up at all; almost as sson as I started it, there were diagnostic messages across the initial white screen with the apple logo in the center saying "panic (cpu 0 caller 0x27b2a2): couldn't reserve lopage pool - not enough lo pages". Some of the details are below.
Anyone recognize this kind of error? Any suggestions on what might be the problem? Where it's saying "not enough pages", that makes me think the memory has gone bad. Or perhaps the motherboard?
Thanks in advance for any help,
Bruce
Stack trace: "Debugger called (panic): 0x10be18..."
panic(cpu 0 caller 0x27b2a2): "couldn't reserve the lopage pool: not enough lo pages\n"
@SourceCache/xnu/xnu-1504.3.12/osfmk/vm/vm_resident.c:823
Debugger called: (panic)
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x10be18 : 0x21b449 (0x5ce420 0x10be4c 0x2238a5 0x0)
0x10be68 : 0x27b2a2 (0x58a68c 0x10be9c 0x4 0x0)
0x10beb8 : 0x61c06b (0x84a3c8 0x84a3cc 0x84ab08 0x84ab08)
BSD process name corresponding to current thread: unknown
Mac OS version:
Not yet set
Kernel version:
Darwin Kernel Version 10.3.0: Fri Feb 26 11:58:09 PST 2010; root:xnu-1504.3.12~1/RELEASE_I386
System uptime in nanoseconds: 0

Stopped by an Apple Store tonight; they tested the whole system and found one memory module was bad. They took out the one bad 2GB module and the laptop runs OK with the other one (less memory to play with, but hey, it runs!). Said it would take a couple of days to order the new memory. All things considered, not too bad an experience.
I was concerned that I could lose some stuff on disk, but found I could boot in "Target Disk Mode" (holding down the "T" key while booting) and could copy things back to my old laptop via FireWire. Try doing that on a broken PC!

Similar Messages

HT1926 I tried to update iTunes in Windows 7, but the program said not enough permission to start services.

I tried to update iTunes in Windows 7, but the program said not enough permission to start services. I tried to reinstall iTunes, but the same message showed up. Do I need to uninstall Apple Mobile Service. I tried but I couldn't uninstall it. What should I do?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or by right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

TS4036 itunes could not restore the iphone because not enough free space is available on the iphone

On April 13, 2013 i plugged my phone in and itunes immediately started an upgrade on my iphone 4 operating system to ios 6.1.3. ONce it completed my phone was restored to factury settings. When i tried restore my backup to the phone, i got the following message
itunes could not restore the iphone because not enough free space is available on the iphone
I am so ****** because i can't figure out a way to at least get my photos from this back...its all lost
I spoke with an Apple rep that day named Jamie who was supposed to help me retrieve my data, but we couldn't figure it out and he asked me to call back in a day or so to get it done. When I called back, i left several messages and got no response. Now i try calling support and they want money before they will talk to me.
Somebody please help.
Thanks

If you restored your phone as new there should be plenty of free space on it. Check Settings>General>Usage to see how much free space you have.
Is your backup on your computer or in iCloud?

HT1414 I just got a replacement iPhone 5 (64MB) for one with a cracked face, and tried to restore it. Got an error message saying the iTunes could not restore the iPhone because not enough free space is available on the iPhone. Now what?

I just replaced my iPhone 5 because of a cracked face. I backed up the old phone to iTunes. When I tried to restore my data off of iTunes to the new phone, I got an error message saying that iTunes could not restore the iPhone because not enough free space is available on the new iPhone. Now what?
I have Apple Care+, but I'll be darned if I can find any way to contact anyone at Apple to talk to about this. They take your money, but make darned sure they don't have to support you unless you jump through a bunch of hoops first, like this site.

I've done a restore.. The phone was completely wiped back to factory settings.. It then tells me there isn't enough space on the phone to restore from back up? How when the phone is empty?!

HT4859 I have the error message "Not enough storage. Cannot backup, not enough backup space in ICloud . . . ", but now the "close" and "settings" buttons don't respond and I cant get the IPad to open so I can go change settings. What do I do?

I have the error message "Not enough storage. Cannot backup, not enough backup space in ICloud . . . ", but now the "close" and "settings" buttons don't respond and I cant get the IPad to open so I can go change settings. What do I do?

For a "hard" restart of your iPad just press the home and power button at the same time and hold it for at least 10-15 sec. until it restarts.

HT201318 My Ipad won't let me in when I try and slide to unlock it...the message is Not enough Storage but I can't get in to add more storage...what do I do to increase storage...can I use my computer to do so?

My Ipad won't let me in when I try and slide to unlock it ...the message is Not Enough Storage...but I can't get in to put more storage on it

Settings > iTunes & App Stores > tap your Apple ID: > View Apple ID > Country/Region
If you find that it is set to the correct region, log out of your iTunes Store account, restart your iPad, and sign into your account again.
Hope this helps.
Regards.

HT4211 I am unable to close my computer...the message on the ipad says not enough icloud storage and go to settings. Unable to go to settings and it is frozen and unable to close down.

I am unable to close my computer...the message on the ipad says not enough icloud storage and go to settings. Unable to go to settings and it is frozen and unable to close down. How do I fix this for the button won't turn it off?

Don't try to turn the iPad off until you reboot.
On your iPad, Did you try holding down on the sleep and home buttons at the same time until the Apple logo appears? If you didn't try it, go ahead and do it. Wait until the Apple logo appears on the iPad screen before you let go of the buttons.

Could not open the file. Not enough memory

I have always used fireworks cs4 normally, but today, i experienced a bit of trouble. there is one png file that when i click to open it the fireworks loads but then a message pops up (could not open the file. Not enough memory) after a bit of researching, i found out that this error happens when i bring to stage one of the common libraries menu bars. (menu bar 4). Does anyone know how to fix this?
ps: I am able to open this file via file-open-*png. Please i really need help. Is the library corrupted maybe?

Hi,
It opened on mine (1.2Gb). I don't think it's a memory issue. I've used FWCS4 with 512mb RAM, never had such a problem. (of course it was very slow at the start, and i used to leave for a cup of coffee first and then come back when it was ready for work. That's why i upgraded to 1.2G .)
Import this menu bar from the common library, save it again as a png and then open it with fireworks the way you did, to see if the same error occurs.
Has this happened with other files as well?

HT1766 I backed up to my PC and attempted restore but I keep getting an error message that "iTunes could not restore the iPhone because not enough free space is available." I have a 32GB iPhone; only 13GB used!!! HELP! iCloud backup/restore did not work

I backed up to my PC and attempted restore but I keep getting an error message that "iTunes could not restore the iPhone because not enough free space is available." I have a 32GB iPhone; only 13GB used!!! HELP! iCloud backup/restore did not work either! How can I resolve this problem to restore from back up.

If you're not a developer then you really should not have upgraded.
I'm unsure how you can fix this as you have already done a back-up on iOS 7 and apple don't support firmware downgrades.

Hello, I can´t active my iPad because appears the following mesage: "Not Enough Storage, This iPad cannot backed up because there is not enough iCloud storage available. You can manage your storage in settings". I did click on Settings but still locked.

Hello, I can´t active my iPad because appears the following mesage: "Not Enough Storage, This iPad cannot backed up because there is not enough iCloud storage available. You can manage your storage in settings". I did click on Settings but still locked.

Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone should restart. This will have no affect on your data.

I see message "Cannot open the file. Not enough memory to open the file"

When I'm trying to open file from adobe.com on my tablet, I see massage " Cannot open the file. Not enough memory to open the file" . I've got 10 gb free memory , so I dont know, why...

Which system are you running (is this information correct in your profile)?
Are there complicating issues to this question such as you transferring libraries between computers?
Have you upgraded iTunes recently?
Troubleshooting iTunes installation on Mac OS X - http://support.apple.com/kb/HT2311 - read section on Opening iTunes for information about running multiple copies of iTunes.

Could not render the database. Not enough memory.

This seems to be a big bug in Fireworks CS4. I am building a 10 page website. I only had the opportunity to insert about 10 high quality images into the project, and then tried saving the project as a Fireworks PNG. It appeared to Save successfully, however from that point on, any object I would click on, any layer I would select a message would appear.
"Could not render the database. Not enough memory."
Has anyone seen this before? How can I fix this?
I tried doing a workaround. I tried opening the saved file from Fireworks CS3. Before opening, it displays a message about insufficient permission in the registry. I click OK, and it opens in CS3. I can finally edit the project and make changes, and save it without problems. However, even after saving in CS3, I cannot open it in CS4 without getting the error message. It is not only on my machine. I send my project to others to see if they can open it via CS4, and they can't either. They get the same message.
I attached the PNG file, this is for a school project.
Any help is most appreciated.

I'm relieved to hear that. So I trust that your images are all nice and small, file-size-wise.
Okay! I trust you have already defragged your hard drive and turned off all those nasty TSRs that eat up your RAM. Fileswapping is usually what slows my computer down.
Check for scripts that might be running wild in the background. Can't think what they might be, but if something is looping and shouldn't be, you'll end up with less free RAM to move around in.
I haven't noticed the problem with lots of layers, but I haven't been watching, either. Have you experimented with turning off the layers that you are not actually exporting? I understand the convenience in keeping all those layers in there...it's a big timesaver in editing throughout a project. If all the layers are not needed in the image export, however, turn them off temporarily. That might save some elbow room.
It sounds as if your system fits the basics, but you might check:
Windows
1GHz or faster processor
Microsoft® Windows® XP with Service Pack 2 (Service Pack 3 recommended) or Windows Vista® Home Premium, Business, Ultimate, or Enterprise with Service Pack 1 (certified for 32-bit Windows XP and Windows Vista)
512MB of RAM (1GB recommended)
1GB of available hard-disk space for installation; additional free space required during installation (cannot install on flash-based storage devices)
1,024x768 display (1,280x800 recommended) with 16-bit video card
DVD-ROM drive
Broadband Internet connection required for online services*
Mac OS
PowerPC® G5 or multicore Intel® processor
Mac OS X v10.4.11–10.5.4
512MB of RAM (1GB recommended)
1GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on flash-based storage devices)
1,024x768 display (1,280x800 recommended) with 16-bit video card
DVD-ROM drive
Broadband Internet connection required for online services*
Rather than jumping to think it's a bug, try a test with 9 layers, or 8 layers. If only 10 layers and up provide problems, file a bug/feature report or contact someone in support.
As this is a user forum, we (other users) neither speak for Adobe nor know everything about the applications from a support viewpoint, so while we're always willing to offer opinions and frequently solutions, real bugs are not in our bailiwick.
Perhaps someone with a multi-layer difficulty can chime in here.
Beth

"iTunes could not restore the iPhone because not enough free space is available of the iPhone"??????

Before updating to iOS6, I backed my iPhone up onto my PC, as I am aware that when updating an iPhone things like notes, contacts etc tend to disappear. However, after the update was complete, when I tried to 'restore back up' I keep getting the message "iTunes could not restore the iPhone because not enough free space is available of the iPhone". I don't understand why this message keeps coming up, because I have 20.96GB free space. All my contacts have gone, and I urgently need them for work. What can I do to solve this problem???

I suggest you delete some stuff off your phone so free up some memory and try again

How can I unblock my ipad? it has the following window, "not enough storage"

I have blocked my ipad; and doesn't allow me to do anything not even turn off. it has the following sign" not enough storage, This ipad cannot be backed up because there is not enough iCloud storage available. you can manage your storage in settings." Has two buttons to choose, CLOSE AND SETTINGS; but doesn't work any of two

Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Does the "Warning! Not Enough Memory" bug still exist in Logic 8?

Hello everyone,
I'm wondering if the dreaded "warning, not enough memory" bug still exists in Logic 8. Here is a detailed account of the bug from Logic 7: http://discussions.apple.com/thread.jspa?messageID=767597&#767597
If this is fixed, I'm seriously considering upgrading mid-project! The film score I'm working on has many doubling parts that I'd like to edit at the same time in the matrix editor. However, editing multiple parts in the matrix editor seems provoke the little bugger, and I've already been bitten a few times in this project already. The only solution I've found is to stay clear of editing multiple parts at once (i.e. edit each parts individually, which obviously takes more time) or save before editing and hope I dont get bit.
I would LOVE to hear a report that this bug has been exterminated, and perhaps may upgrade mid project if thats the case.
Thanks in advance for your reply!

Heya,
I'm not familiar with the bug you're talking about. But would, as a fellow film composer, strongly urge you against the mid project switch.
I loaded in LP8 and ofcourse had a look at what it was all about, and it's really really fantastic. It also seems very stable. I fortunately have a side project that I am working on so switched to LP8 for that. Whilst I'm thankful to get my head around a very new approach for logic, I'm also thankful that I have this side project as it has illuminated a multitude of problems that exist with LP8 that would make any scoring process a bit of a headache to say the least. The main one being that if you don't have a very very powerful mac (I'm prepping a really fully loaded 8 core) you are not going to get anywhere near the performance out of Logic as you do with 7. This is a bottom up overhaul and it needs hardware to match. Heck even my 30" cinema display seems cramped and insubstantial on this new version. I would be so bold to say hold off until you have a hearty new mac and at least 8.2 is released IMHO but maybe try and get on it onto a smaller project to familiarize yourself before hand.

Panic: couldn't reserve the lopage pool: not enough lo pages

Similar Messages

Maybe you are looking for