Pantone + default conversion value

While using Illustrator CS5, when the Pantone+ Solid Coated palette is loaded, the default conversion icon is set to LAB instead of CMYK, which was the case in the previous version. This is causing quite a bit of color output problems. Is there a way to set the default back to CMYK conversion without having to convert all the swatches used in the job manually?

Change the setting in the "new document profiles"
http://blogs.adobe.com/infiniteresolution/2009/05/startup_profiles_a_great_tool.html

Similar Messages

FAH Default Conversion Rate Type

Hello all,
IN FAH you can assign the system source 'Default Conversion Rate Type' to the accounting attribute 'conversion rate type'. Great! But what rate type will it pick up, where do you set this default rate type?
thanks
Abe

Vamsi,
You are right. I tested and I got error 95357 'There is a missing system source value. Please inform your system administrator or support representative that: There are no values for the system source Default Conversion Rate Type used by Oracle Subledger Accounting.'
So that leaves me two choices: a custom source (not recommended for performance reasons) or an additional column in the transaction object which is a bit silly as it will always be populated with the same value. Any suggestions for a better approach are welcome.
thanks
Abe

Receipt Default Conversion Rate

Hello,
We create a Receipt Interface Script to create the Transactions Automatic and receive the items from the PO, when we checked the receipt created the conversion rate was coming from the PO Header but now comes from the PO Distributions and our script has not changed, does anyone know what could have happened and how to solve it?
Thanks

Vamsi,
You are right. I tested and I got error 95357 'There is a missing system source value. Please inform your system administrator or support representative that: There are no values for the system source Default Conversion Rate Type used by Oracle Subledger Accounting.'
So that leaves me two choices: a custom source (not recommended for performance reasons) or an additional column in the transaction object which is a bit silly as it will always be populated with the same value. Any suggestions for a better approach are welcome.
thanks
Abe

Overwrite a default 'X' value with a blank in LSMW

Hello,
I have an LSMW (batch input) for functional locations. I want in some cases to overwrtire the default 'X' value for IEQUI field. However, when I put 'blank' in my file, the program ignores it and keeps the default 'X'. Could you please asssist on this issue?
Thanks in advance,
Eli

Hi,
This is the problem... The default is 'X' (flag on). So, when I want to switch it off, I tried to pass the Null value to the field - did not work. I wrote a code, which puts this field to ' ', if the value in upload file is blank - did not work. The conversion file is created correctly, but the field is not updated. If I create the entity manually, I'm able to set the flag off, so it's not some functional restrict.
Any ideas?
Regards,
Eli

Crystal Reports 9 and SQL Server 2005 default parameter values

We're using Crystal Reports 9 and upgraded from SQL Server 2000 to SQL Server 2005.
I'm noticing a very weird problem which I wonder if anyone else has experienced (and hopefully found a resolution for). It appears that in using Crystal with SQL Server 2005 stored procedures, if we have default parameter values in the stored procedures, the default parameter values get completely ignored if you pass in a NULL value from Crystal!
For example, if you have a stored procedure that begins like this:
ALTER Procedure [dbo].[StoredProcedure]
@Param1 VarChar(200) = '',
@Param2 VarChar(200) = ''
AS ...
both @Param1 and @Param2 have a default value of an empty string, and therefore should become empty strings if nothing (NULL values) gets passed in for them.
But, like I said, what I'm finding is that with Crystal calling the stored procedure with NULL @Param1 and @Param2 values, they never become empty strings, but rather remain as NULLs.
This was never a problem with SQL 2000.
Very perplexing. Anyone else every experience this?
Thank you.

Please ignore my earlier post -- answered my own question.
NULL parameter values do not get replaced by default values in SQL -- that is normal behavior in both SQL 2000 and SQL 2005. Just goes to show, that no many how many years programming experience you have, you can still get tripped up sometimes : (

Default search value for Query By Example Report

Is there any way I can add the wildcard % as a default search value for text fields in the customization screen for a QBE report? The aim is to relieve the user from knowing that you have to input the wildcard % in the search field.
Also, Is there a way to change the label of the standard 'Close' button, which is a bit misleading as it actually takes you back to the report customisation window?
Cheers,
Arnt

Hi,
You can give default values for bind variables in sql report and not for QBE reports. Also it is not possible to remove the close button.
Thanks,
Sharmila

Default cell values for column not properly saved in uir file in labwindows 2009 (9.1.0 427)?

I've run into a strange problem with the table control. Basically, even though I set default cell values for a particular column as numeric, when I try to add items to the list it tries to add them as strings, and returns an error message that it is expecting *char instead of int. Furthermore, when I open the uir file that contains the table in question in 2010, it appears as if the default cell values for that column are still set as strings, even though in 2009 when I open the uir file it shows as numbers. I tried converting the uir to C code, and sure enough the C code indicated that the column still is a string type.
I've gone ahead and made a small project to show the issue. If you open this project in labwindows 2009 and click on the table in the table_bug.uir, and edit default cell values for column 1, you will see that the cell settings have type as numeric and data type as int. When you run the project, however, it will fail with an error message saying that it is looking for a *char. When this same project is loaded into labwindows 2010, clicking on the table in table_bug.uir and edit default cell values (column 1) shows the type as string. When I change this to numeric (and change numeric attribute to int), this runs fine in 2010. I tried simply changing the uir in 2010, and then using it in 2009, but 2009 complains that the uir is from a newer version (understandable). If there is any workaround that would let me continue to use 2009 for the time that would be great.
Any help would be greatly appreciated.
thanks,
Alex Corwin
Solved!
Go to Solution.
Attachments:
table_bug.zip ‏324 KB

I opened the UIR in 2009 (but I have 2009 SP1) and it still showed that the default value for the first column was a string. I didn't have any problems changing it to a numeric int, and then building and running the project without error.
Here are a few things you can try:
1) Change the default value to a string. OK out of the dialog, re-enter the dialog, and change it back to Numeric int. Resave and see if the problem has gone away.
2) You said you get a ".UIR is from a newer version" error when opening the 2010 UIR in 2009. Does the UIR still open if you click okay? Often times this will work just fine. Assuming you don't have any problems with this, make a minor change to the UIR in 2009, such as moving the table to the left, and then back to the right and then re-save. See if your program works now.
Kevin B.
National Instruments

Default multiple values in custom search help

Hi All,
I created a custom search help for the vendor. The fields in the search help are LIFNR (Vendor) and KTOKK (Account Group).
I would like to be able to set three default values for the account group. That is, when the user clicks on the dropdown to display the search help, I would like to have three values populated in the KTOKK field. Is this possible?
Any help would be appreciated.
Thanks!

Hi,
I am not sure abt default values, but if you are using this search help in any report than you can set hot keys in your search help and using hot keys, you can set some default filter values in you report's parameter.
you can set variant in your report where parameter is having values like :: =,<hotkey>,<sel1>,<sel2>
here <hotkey> : wht you have assingned in search help.
<sel1> : one of those default values you want to display.
<sel2> : one of those default values you want to display for the second field.
hope it helps,
Regards,
Sagar

How to Change the default Search value for Field Role?

HI,
I went through numerous threads on how to default the search value , but does not help for my issue. Hence im posting this new thread. Please provide your suggestions on how to achieve this.
For the Ship-to party field (in item detail ) on webui when i do a F4 help i get the pop up with various search criteria and for the field Role the default value is "Ship-to party". which is visible. we need to change this default value to Prospect which is available in drop down.
The attribute is STRUCT.ROLE and view BP_HEAD_SEARCH/SearchHelp . The method GET_DQUERY_VALUEHELPS from the context node class is called to fill the value help for this attribute, but i dont understand how the ship-to party is filled as default. There is no code in this method to default the value.
The generic GET_V_S_STRUCT method also does not default the Ship-to party on this field.
I want to understand how this Ship-to party is filled by default and how can i change this to prospect..
Many Thanks,
Shaik

We had a same requirement of defaulting Sales org and division in search criteria for a specific value.
this can be doen by redefining "DO_PREPARE_OUTPUT" method in IMPL class for the respective view.
See the code:
METHOD do_prepare_output.
*CALL METHOD SUPER->DO_PREPARE_OUTPUT
** EXPORTING
**    iv_first_time = ABAP_FALSE
DATA:
    lr_qs TYPE REF TO cl_crm_bol_dquery_service.
* Get current query object
lr_qs ?= me->typed_context->search->collection_wrapper->get_current( ).
IF iv_first_time = abap_true.
    lr_qs->clear_selection_param_values( ).
    lr_qs->delete_empty_selection_params( ).
*   if l_sales_orgs is initial.
    CALL METHOD lr_qs->insert_selection_param
      EXPORTING
        iv_index     = '1'
        iv_attr_name = 'SALES_ORG'
        iv_sign      = ' '
        iv_option    = 'EQ'
        iv_low       = 'O 50000514'.
*   endif.
*   if l_dist_chan is initial.
    CALL METHOD lr_qs->insert_selection_param
      EXPORTING
        iv_index     = '2'
        iv_attr_name = 'DISTR_CHAN'
        iv_sign      = ' '
        iv_option    = 'EQ'
        iv_low       = '01'.
* endif.
Hope this will help..
THanks & Regards,
Amit

How can I set bind parameter as Default Display Value in JHeadstart

Hi,
I am using -
JDeveloper Studio Edition Version 10.1.3.1.0.3984
JHeadstart Release 10.1.3.1.26
Can anybody help me for the following:
I am using a super class of ViewObjectImpl where I am definning a bind parameter (Student ID) using login userid:
if ("p_std_id".equals(bindParam[0])) {
sLog.debug("executeQueryForCollection: found bind param p_std_id, setting value to " + studentNumber_from_LDAP);
bindParam[1] = studentNumber_from_LDAP;
Then I defined p_std_id in Bind Variables tab in VO Editor and used that in Where clause in the SQL Statement tab.
This is working fine.
Now what I want to do is:
I want to put the value of p_std_id as Default Display Value for a field.
Can anybody let me know how I can put the value of p_std_id in JHeadstart Application Definition?
Thanks
Syed Jabbar
University of Windsor
Windsor, ON, Canada

Hi Jan and Steven,
Thanks for your reply.
I need to show the default value in the table layout.
Steven, could you please give some more hints about EL Expression?
To obtain the value of p_std_id now and pass it on as bind param, I am using a class extending ViewObjectImpl. Inside that class I am using the following method:
I'd appreciate if you could help for the EL Expression.
Thanks
protected void executeQueryForCollection(Object Object, Object[] bindParams,
int i) {
String userId = ((ApplicationModuleImpl)getApplicationModule()).getUserPrincipalName();
try{
getLdapInfo(userId);
catch(Exception e) {
sLog.debug("executeQueryForCollection: Userid = " + userId);
if (bindParams != null)
for (int j = 0; j < bindParams.length; j++)
Object[] bindParam = (Object[])bindParams[j];
if ("p_user_id".equals(bindParam[0])) {
sLog.debug("executeQueryForCollection: found bind param p_user_id, setting value to " + userId);
bindParam[1] = userId;
if ("p_emp_id".equals(bindParam[0])) {
sLog.debug("executeQueryForCollection: found bind param p_emp_id, setting value to " + employeeNumber_from_LDAP);
bindParam[1] = employeeNumber_from_LDAP;
if ("p_std_id".equals(bindParam[0])) {
sLog.debug("executeQueryForCollection: found bind param p_std_id, setting value to " + studentNumber_from_LDAP);
bindParam[1] = studentNumber_from_LDAP;
super.executeQueryForCollection(Object, bindParams, i);
Thanks
Syed

Place default checkbox value "in SESSION" on initial page load

Oracle 11.2
Apex 4.1
Desire outcome: Chart renders on inital page load using default value of checkbox in query.
I have a checkbox with a default (checked) value. It shows checked when the page renders for the first time but the value is not in the SESSION state. I use this value in a query for a chart. I do not want to use a Submit button so I have a dynamic action submitting the value for the checkbox and the chart refreshes as desired when I check and uncheck the box.
I tried "Fire on Page Load" in the DA Execution Options, as well, but that caused a loop where the page renders and immmediately renders, and immediately renders, etc.
Is there a declarative solution that submits the current, in this case default, values when the page is loaded? I only need and want the default values used the first time the page is accessed. This is the initial page of the application but I need the same behavior on all pages for the separate checkbox selections found there.
May God Bless,
Howard

Howard (DBA in Training) wrote:
If I remove the Default Value and add a Before Header page computation for the item with static assignment to
a:bI get the 2 A/B checkboxes, both checked, and the value is set in session state.If you log in here, you can see it up close and personal!
http://apex.oracle.com/pls/apex/f?p=21997:3 Login: Dever / Ima9Dever
The Default Value colon-delimited string must contain the checkbox values, not the labels. In a static LOV the checkbox options are specified as <tt>label;value</tt> pairs. Thus in your checkbox LOV the labels are A/B, whilst the values are a/b. The values are case-sensitive.
The Default Value should therefore be:
a:bwhereas you've specified:
A:BWith the checkbox item LOV Display Extra Values property set to Yes, APEX displays these extra values that are not included in the LOV definition as additional checkboxes. You can see this if you inspect the rendered checkbox elements in the HTML source:
<input type="checkbox" id="P3_CHECKBOX_0" name="p_v01" value="a">
<input type="checkbox" id="P3_CHECKBOX_1" name="p_v01" value="b">
<input type="checkbox" id="P3_CHECKBOX_2" name="p_v01" value="A" checked="checked">
<input type="checkbox" id="P3_CHECKBOX_3" name="p_v01" value="B" checked="checked">You get the a/b values defined in the LOV, plus the extra A/B values the LOV knows nothing about.
==== ) How do you keep it from setting/resetting these values each time the
page is rendered? The need is to do it only the very first time? ( ====Put a Value of Item / Column in Expression 1 Is NULL condition on the Computation. Problem then is that the computation will be run if the user can [legitimately] deselect all of the checkboxes, either leaving you back where you started, or requiring the use of a further item to flag whether it is the really "the very first time" (which I find intellectually deeply unsatisfactory). This may be a sign that the control should really be a radio group that always has one option set, rather than a check box.

Exception Description: No conversion value provided for the attribute

Hi!,
The following is printed when I try to persist an entity with a an enum attribute in it. It deployted succuessfully and mapped fine a table, my configuration is, Windows2003, SJSAS 9 FCS, Derby DB.
Exception [TOPLINK-115] (Oracle TopLink Essentials - 2006.4 (Build 060412)): ora
cle.toplink.essentials.exceptions.DescriptorException
Exception Description: No conversion value provided for the attribute [NEW].
Mapping: oracle.toplink.essentials.mappings.DirectToFieldMapping[status-->REPORT
.STATUS]
Descriptor: RelationalDescriptor(com.namespace1.reports.persistence.Report --> [
DatabaseTable(REPORT)])
The Entity class is the following:
* Report.java
* Created on 25 �� , 2006, 06:07 �
* To change this template, choose Tools | Template Manager
* and open the template in the editor.
package com.namespace1.reports.persistence;
import java.io.*;
import java.util.*;
import javax.persistence.*;
* @author Administrator
@javax.persistence.Entity(name="Report")//name used in EJB-QL.
public class Report implements Serializable {
public enum ReportStatus{
NEW,
OPEN,
SUBMITTED,
ACCEPTED,
REJECTED
@javax.persistence.Id
@javax.persistence.GeneratedValue(strategy = javax.persistence.GenerationType.AUTO)
private long id;
@Transient
private int currentEntryId;
@Column(length=256)
private String title;
private String ownerName;
@Enumerated(EnumType.ORDINAL)
@Basic
private ReportStatus status;
@OneToMany(mappedBy="report",targetEntity=ReportEntry.class,cascade=CascadeType.ALL)
private Map<Integer,ReportEntry> reportEntries;
/** Creates a new instance of Report */
public Report() {
public long getId() {
return id;
public void setId(long id) {
this.id = id;
public int hashCode() {
int hash = 0;
hash += (int)getId();
return hash;
public boolean equals(Object object) {
// TODO: Warning - this method won't work in the case the id fields are not set
if (!(object instanceof Report)) {
return false;
Report other = (Report)object;
if (this.getId() != other.getId()) return false;
return true;
public String toString() {
return "com.namespace1.reports.persistence.Report[id=" + getId() + "]";
public int getCurrentEntryId() {
return currentEntryId;
public void setCurrentEntryId(int currentEntryId) {
this.currentEntryId = currentEntryId;
public String getTitle() {
return title;
public void setTitle(String title) {
this.title = title;
public String getOwnerName() {
return ownerName;
public void setOwnerName(String ownerName) {
this.ownerName = ownerName;
public ReportStatus getStatus() {
return status;
public void setStatus(ReportStatus status) {
this.status = status;
public Map<Integer, ReportEntry> getReportEntries() {
return reportEntries;
public void setReportEntries(Map<Integer, ReportEntry> reportEntries) {
this.reportEntries = reportEntries;
}

This problem is side effect of issue 193 (https://glassfish.dev.java.net/issues/show_bug.cgi?id=193) and is described in details in issue 634 (https://glassfish.dev.java.net/issues/show_bug.cgi?id=634). Your choices are to use the work around described in the above issue or switch to the GlassFish build with the fix.
regards,
-marina

Set the default field value to transaction code field, when calling from WD

Hi all,
Can we pass the value in a input field of a standard transaction calling from WD application. Suppose we are calling a transaction VA03 in an external window, then how will be pass the value in the VBAK_VBELN screen field.
Is there any way to pass the value to this transaction field. I have also tried out to set the parameter ID 'AUN' for VA03 transaction VBELN field. But it did not work for me.
Is there any way to set the default field value to transaction code field, when calling from WD?
Please suggest, if anyone have any idea.
Thanks
Sanket

Hi,
I am using the below code to open a standard transaction. It will help you to explain my point more easily.
DATA: url TYPE string,
          host TYPE string,
          port TYPE string.
*Call below method to get host and port
cl_http_server=>if_http_server~get_location(
     IMPORTING host = host
            port = port ).
*create URL
CONCATENATE 'http'
'://' host ':' port
'/sap/bc/gui/sap/its/webgui/?sap-client=&~transaction=' 'VA03'
   INTO url.
*get the window manager as we are opening t code in external window.
DATA lo_window_manager TYPE REF TO if_wd_window_manager.
DATA lo_api_component TYPE REF TO if_wd_component.
DATA lo_window TYPE REF TO if_wd_window.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
call the url which we created above
lo_window_manager->create_external_window(
EXPORTING
url = url
RECEIVING
window = lo_window ).
lo_window->open( ).
Note*
One more query I want to add to this thread, that is there any possibility to call a custom transaction as well?

How do I default the value in an LOV?

Dear experts,
What I am trying to achieve is changing the default value in an LOV, based on the value of another field. I have an LOV that lists employee names. There is another field, an account number, which when selected is used to determine the default employee set against this account. This employee I want to use to add into the LOV as a default the value, before the user selects a value in the LOV. The user can still invoke the LOV and search for a different employee, but the functionality I am concered with is setting this default employee.
I have modified the ProcessForm in the associated controller class. I have obtained the account number and using an SQL query I have obtained the default employer, but I can not seem to set this value in the LOV as a default. Does any one have any ideas?
For the LOV there are two criteria values in the LOV mapping, the org id and the code combination id, both used in the query to get the default employee.
Many thanks for your assistance in advance.
Mark

Hi,
IF want use dependent lov ..then refer below link..
http://oracleanil.blogspot.com/2010/12/dependent-lov-in-oaf.html
Or
IF u want set any default value in lov2 when value selecetd in lov1...
Get the event of the lov1 on PFR..
if("LOv1ID").equals(pageContext.getParameter(SOURCE_PARAM))
&& ("lovUpdate".equals(pageConext.getParameter(EVENT_PARAM))
|| "lovValidate".equals(pageConext.getParameter(EVENT_PARAM))))
Here try set default value as given by Gyan...
Pls check syntax errors...
Regards
Meher Irk

Urgent..getting default & changed values in ALV editable....have ur point.s

Hi all,
I m using interactive ALV grid with 1 column editable with some default values, When i m clicking on SAVE button, only the values which are changed by the user in that column are coming in the internal table, & the default values are automatically deleted by the following code....
But my requirement is to save all the default & changed values of the ALV column....
<b>Help me out & have ur points.</b>
DATA ref1 TYPE REF TO cl_gui_alv_grid.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
importing
               e_grid                           = ref1
CALL METHOD ref1->check_changed_data
IMPORTING
   e_valid   =
CHANGING
   c_refresh = 'X'

Pradeep,
When ur doing the CHECK_CHANGED_DATA, u ll get the edited values inside this callback sub -routine only. so here u trap the values those are changed ( thats after editing).
Once the control goes back to the original program ( calling prog ) , u ll end up with ur old data ( before editing).
you ll have to handle that explictly in your code, or shift to OO alv grid like this -
REPORT ZSKC_GRID.
TABLES : EQUI.
DATA   : BEGIN OF T_EQUI OCCURS 0,
          EQUNR TYPE EQUI-EQUNR,
          AENAM TYPE EQUI-AENAM,
         END   OF T_EQUI.
DATA : T_FCAT TYPE LVC_T_FCAT,
       G_FCODE TYPE SY-UCOMM.
DATA : G_GRID TYPE REF TO CL_GUI_ALV_GRID.
SELECT-OPTIONS: S_EQUNR FOR EQUI-EQUNR.
START-OF-SELECTION.
* get data.
PERFORM SUB_GET_DATA.
* Populate catalog.
PERFORM SUB_BUILD_CATALOG CHANGING T_FCAT.
* Display the grid.
PERFORM SUB_SHOW_GRID.
CALL SCREEN 9001.
*&      Form SUB_GET_DATA
*       Get data
FORM SUB_GET_DATA .
SELECT EQUNR AENAM
FROM   EQUI
INTO   TABLE T_EQUI
WHERE EQUNR IN S_EQUNR.
IF SY-SUBRC NE 0.
* Give some message if needed
ENDIF.
ENDFORM.                    " SUB_GET_DATA
*&      Form SUB_BUILD_CATALOG
*       text
*      <--P_T_FCAT text
FORM SUB_BUILD_CATALOG CHANGING PT_FCAT TYPE LVC_T_FCAT.
DATA : WA_CAT TYPE LVC_S_FCAT.
CLEAR WA_CAT.
WA_CAT-FIELDNAME = 'EQUNR'.
WA_CAT-TABNAME   = 'T_EQUI'.
WA_CAT-REF_FIELD = 'EQUNR'.
WA_CAT-REF_TABLE = 'EQUI'.
APPEND WA_CAT TO PT_FCAT.
CLEAR WA_CAT.
WA_CAT-FIELDNAME = 'AENAM'.
WA_CAT-TABNAME   = 'T_EQUI'.
WA_CAT-REF_FIELD = 'AENAM'.
WA_CAT-REF_TABLE = 'EQUI'.
WA_CAT-EDIT      = 'X'.
APPEND WA_CAT TO PT_FCAT.
ENDFORM.                    " SUB_BUILD_CATALOG
*&      Form SUB_SHOW_GRID
*       Show grid
FORM SUB_SHOW_GRID .
* create the Grid Object.
CREATE OBJECT G_GRID
    EXPORTING
       I_PARENT          = CL_GUI_CONTAINER=>SCREEN0
    EXCEPTIONS
      ERROR_CNTL_CREATE = 1
      ERROR_CNTL_INIT   = 2
      ERROR_CNTL_LINK   = 3
      ERROR_DP_CREATE   = 4
      OTHERS            = 5.
CHECK SY-SUBRC EQ 0.
* Display contents,
CALL METHOD G_GRID->SET_TABLE_FOR_FIRST_DISPLAY
    CHANGING
      IT_OUTTAB                     = t_equi[]
      IT_FIELDCATALOG               = t_fcat
    EXCEPTIONS
      INVALID_PARAMETER_COMBINATION = 1
      PROGRAM_ERROR                 = 2
      TOO_MANY_LINES                = 3
      others                        = 4.
ENDFORM.                    " SUB_SHOW_GRID
*&      Module STATUS_9001 OUTPUT
*       text
MODULE STATUS_9001 OUTPUT.
   SET PF-STATUS 'PF_9001'.
   SET TITLEBAR 'TITLE_9001'.
ENDMODULE.                 " STATUS_9001 OUTPUT
*&      Module USER_COMMAND_9001 INPUT
*       text
MODULE USER_COMMAND_9001 INPUT.
CASE G_FCODE.
    WHEN 'BACK' OR 'CANC' OR 'EXIT'.
      LEAVE TO SCREEN 0.
    WHEN 'HAVE'.
*    After editing everything user presses this button.
     PERFORM SUB_GET_EDITED_DATA.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_9001 INPUT
*&      Form SUB_GET_EDITED_DATA
*       Read the ALV grid and get current internal table.
FORM SUB_GET_EDITED_DATA .
DATA : T_OLD_DATA LIKE T_EQUI OCCURS 0.
* hold the old values if u need them.
t_old_data[] = t_equi[].
* This will update the global internal table.
CALL METHOD G_GRID->CHECK_CHANGED_DATA.
* Now t_equi have changed here. u have the old data in the T_OLD_DATA.
BREAK-POINT.
ENDFORM.                    " SUB_GET_EDITED_DATA
Create a blank screen called 9001. and Pf-staus has a buton with fcode "HAVE". ( alongwith BACK canc exit).

Pantone + default conversion value

Similar Messages

Maybe you are looking for