Default cell values for column not properly saved in uir file in labwindows 2009 (9.1.0 427)?

I've run into a strange problem with the table control. Basically, even though I set default cell values for a particular column as numeric, when I try to add items to the list it tries to add them as strings, and returns an error message that it is expecting *char instead of int. Furthermore, when I open the uir file that contains the table in question in 2010, it appears as if the default cell values for that column are still set as strings, even though in 2009 when I open the uir file it shows as numbers. I tried converting the uir to C code, and sure enough the C code indicated that the column still is a string type.
I've gone ahead and made a small project to show the issue. If you open this project in labwindows 2009 and click on the table in the table_bug.uir, and edit default cell values for column 1, you will see that the cell settings have type as numeric and data type as int. When you run the project, however, it will fail with an error message saying that it is looking for a *char. When this same project is loaded into labwindows 2010, clicking on the table in table_bug.uir and edit default cell values (column 1) shows the type as string. When I change this to numeric (and change numeric attribute to int), this runs fine in 2010. I tried simply changing the uir in 2010, and then using it in 2009, but 2009 complains that the uir is from a newer version (understandable). If there is any workaround that would let me continue to use 2009 for the time that would be great.
Any help would be greatly appreciated.
thanks,
Alex Corwin
Solved!
Go to Solution.
Attachments:
table_bug.zip ‏324 KB

I opened the UIR in 2009 (but I have 2009 SP1) and it still showed that the default value for the first column was a string. I didn't have any problems changing it to a numeric int, and then building and running the project without error.
Here are a few things you can try:
1) Change the default value to a string. OK out of the dialog, re-enter the dialog, and change it back to Numeric int. Resave and see if the problem has gone away.
2) You said you get a ".UIR is from a newer version" error when opening the 2010 UIR in 2009. Does the UIR still open if you click okay? Often times this will work just fine. Assuming you don't have any problems with this, make a minor change to the UIR in 2009, such as moving the table to the left, and then back to the right and then re-save. See if your program works now.
Kevin B.
National Instruments

Similar Messages

Default values of columns not transferred in SSIS Transfer Objects Task

I am working on a project that is creating a new application, my area of the project being the migration of data from the old application database, transforming it, and populating the new database.
The transformations to the old data are done in a staging database.
At the end of the process, the staging database ends up with a lot of new applications tables, populated with the migrated legacy data.
We need to move these tables from the staging database to (initially) our test databases, but ultimately what will be the live database.
We have tried using the "Transfer SQL Server Objects Task" in SSIS, but have ran into a problem that a lot of the database tables have default values for columns.
These default values are not brought over.
Example. Tables contain a "GUID" field, which has a default of value of newid()
Right clicking and the table generating the CREATE script generates
[GUID] [uniqueidentifier] ROWGUIDCOL NOT NULL CONSTRAINT [DF_tbCRM_Client_GUID] DEFAULT (newid()),
However, the Transfer objects task does not create this default of newid()
Examining the SQL generated by the Import / Export Wizard when investigating this shows that the wizard generates this column as
[GUID] uniqueidentifier NOT NULL
and the column default value is lost.
Is there something i should be setting somewhere to force SSIS to bring these column definitions over correctly?

Kaarthik Sivashanmugam wrote:
This behavior is by design to maintain backward compatibility with the Copy SQL Server Objects task in SQL Server 2000. Only two constraints (Primary key and foreign key constraints) are expected to be copied by Transfer Objects task.
thank you for you response Sivashanmugam.
How can I move these tables (of which there are over a hundred) from my staging database into the application database - and keep the table definitions correct?
I cannot use the transfer objects task, as this will not define the tables correctly.
I cannot use the import and export wizard, as this will also not define the tables correctly.
This means I will manually have to code the drop, create and inserts for over a hundred tables?

Computing default value for column MRU. error.

hi
we moved from apex 3.x to 4.2
AN apex application was working fine..After upgrade it gave error while trying to insert using apex front end
Error computing default value for column Apply MRU.
ORA-06550: line 3, column 46: PL/SQL: ORA-00972: identifier is too long
The PK of the relevant table is based in a sequence.Can i relplace old seq. using new seq...will it help?
When we insert using regular insert statement in sql developer, its fine though.
thanks
kp
Edited by: user8612301 on Mar 15, 2013 7:09 AM

Hi,
Remember the error says "default value". What is your code to set the default value?
I've seen this error before where it was simply a statement like
column = "text123456789012345678901234567890";where the identifier error was given because it should have been
column = 'text123456789012345678901234567890';Since the string doesn't begin with an apostrophe, the parse thinks it's a LONG identifier. Hence, error!
Howard

Default search value for Query By Example Report

Is there any way I can add the wildcard % as a default search value for text fields in the customization screen for a QBE report? The aim is to relieve the user from knowing that you have to input the wildcard % in the search field.
Also, Is there a way to change the label of the standard 'Close' button, which is a bit misleading as it actually takes you back to the report customisation window?
Cheers,
Arnt

Hi,
You can give default values for bind variables in sql report and not for QBE reports. Also it is not possible to remove the close button.
Thanks,
Sharmila

Checkbox and ORA-20507: Invalid numeric value #:# for column

Hi All,
I'm facing problems Checkboxes in a form.
I created a form and report on a table. one of the fields on the form is a checkbox and when ever I want to create a new record or update with more than one value for the checkkbox I obtain the following error:
ORA-20507: Invalid numeric value #:# for column COLUMN_NAME Where by #:# is numbers
I think the error occurs at the processes of get_pk and process_row_of_......
how should I change the processes to accommodate the checkbox values.
Kind regards
Mel

Hi Roel,
Colunm = number
LOV Definition
select product display, prod_num return from product_category_vw
where prod_num not in (select p.prod_num from product_user_tb p, user_tb u
where p.user_num = u.user_number
and u.user_name = :APP_USER)
ORDER BY 1column = number
LOV Definition
select school d, sch_id r from school_tbRegards
Mel

Scans from HP C4680 are not properly saved after upgrade to OS X 10.9

After upgrade to OS Mavericks all-in-one HP C4680 does print and scan however scans are not properly saved. Saved file in preview shows grey bands; text is not readable.
Driver update from HP support didn't resolve the issue, nor any workaround suggested in HP community.
Issue is appaerently not unique for C4680 but also other HP equipment.
Has anyone encountered this malfunction? If yes were you able to resolve it and how?

Your screenshots are not appearing for me.
Uninstall PC Tools "iAntiVirus" and "MacKeeper" according to their respective instructions. Confirm their thorough, complete, and permanent eradication from your Mac, and evaluate the results.
Other problems exist, including what appears to be a modified Hosts file. If you know the reason for its modification, proceed on the basis of that knowledge. A remote access tool known as Teamviewer is also installed. If you no longer require it, uninstall it.
Follow these instructions to uninstall MacKeeper. They have been tested with the most recent version of MacKeeper. Earlier versions than the one released in 2012 require more extensive work to uninstall all its components.
If you actually used MacKeeper to alter your system, e.g. "remove excess binaries" or such, you will need to reinstall OS X as well as all your additional software. Uninstalling MacKeeper is insufficient to reverse the corruption it is capable of - once again, that is if you used it.
If you merely installed MacKeeper but did not use it to perform any particular action, the following instructions will suffice.
If you used MacKeeper to encrypt any files or folders, use MacKeeper to un-encrypt them first.
Quit the MacKeeper app if it is running.
Open your Applications folder: Using the Finder's Go menu, select Applications.
Drag the MacKeeper icon from your Applications folder (not the Dock) to the Trash.
You will be asked to authenticate (twice):
You do not need to provide a reason for uninstalling it:
Just click the Uninstall MacKeeper button. You will be asked to authenticate again.
After it uninstalls you may empty the Trash and restart your Mac. All that will remain is an inert log file that does nothing but occupy space on your hard disk.

ORA-23460: missing value for column column name in resolution method

Hi All,
We have implemented bi-directional replication via oracle streams..Oracle 10g 10.2.0.4
We are getting following error in conflict resolution .ORA-23460: missing value for column "ASSIGNED_APPL_USER_ID" in resolution method "<method>" for
"TMADMIN"."PATIENT_VISITS"."REP_UPDATE" ORA-01403: no data found .
Above column ASSIGNED_APPL_USER_ID is NULL column ,We are using MAXIMUM resolution method for update conflict handler .We tried many times on toad the same scenarios and working fine.
We have set supplemental logging on primay and unique columns.
I found many docs on internet and they all said add supplemental logging on all columns.
We did set up like this ...:
DECLARE
COLS DBMS_UTILITY.NAME_ARRAY;
BEGIN
cols(1) := 'STUDY_ID';
cols(2) := 'KENDLE_STUDY_SUB_ID';
cols(3) := 'SITE_ID';
cols(4) := 'PATIENT_ID';
cols(5) := 'VISIT_NUMBER';
cols(6) := 'VISIT_TYPE';
cols(7) := 'VISIT_DATE';
cols(8) := 'CRF_COLLECTION_DATE';
cols(9) := 'DT_CREATED';
cols(10) := 'DT_MODIFIED';
cols(11) := 'MODIFIED_BY';
cols(12) := 'MONITOR_VISIT_DATE';
cols(13) := 'UNSCHEDULED_VISIT_REASON';
cols(14) := 'LAST_SCHEDULED_VISIT_NUMBER';
cols(15) := 'VISIT_DATE_IN_TRIALBASE';
cols(16) := 'PROJECTED_VISIT_DATE';
cols(17) := 'SEND_CERTIFIED_LETTER_YN';
cols(18) := 'ASSIGNED_APPL_USER_ID';
cols(19) := 'DATE_CERTIFIED_LETTER_SENT';
cols(20) := 'DURATION_OF_CALL_IN_MINUTES';
cols(21) := 'COMPLETED_APPL_USER_ID';
cols(22) := 'CALL_STATUS';
cols(23) := 'VISIT_HYPERLINK';
cols(24) := 'NEXT_CALL_DATE';
cols(25) := 'DT_PMNT_REQUESTED_TO_SPONSOR';
cols(26) := 'VISIT_DATE_NAP_YN';
cols(27) := 'MONITOR_VISIT_DATE_NAP_YN';
cols(28) := 'CRF_COLLECTION_DATE_NAP_YN';
cols(29) := 'IMPORTED_SUBJECT_VISIT_DATE';
cols(30) := 'REMINDER_SENT_DATE';
DBMS_APPLY_ADM.SET_UPDATE_CONFLICT_HANDLER(
OBJECT_NAME =>'TMADMIN.PATIENT_VISITS',
METHOD_NAME =>'MAXIMUM',
RESOLUTION_COLUMN =>'DT_MODIFIED',
COLUMN_LIST =>cols);
END;
DT_MODIFIED is our resolution columns......
Any help would be appreciate...
Thanks in advance.
Thanks,
Nick.

You should post this question the Oracle Server forums.
Good luck!
Warm regards.
ashok

How to use different default parameter value for different report subscriptions

In ssrs is it possible to define different default parameter values for different subscriptions? In the following example I have a report which has two subscriptions with different start date and end date values:
Report name – Testsubscription.rdl
Subscription-1
Input parameter (default values):
start_date = first day of current Month
end_date = till date
Subscription-2
Input parameter (default values):
start_date = first day of current Quarter
end_date = till date
I know an alternative way of doing this would be to copy the rdl file with a different name but I am curious whether this can be done within a single report definition file. I am using SQL Server 2008 R2 Standard Edition.
Thanks!
spp

Hi sppdba,
As per my understanding, there is a report with two parameter: start_date and end_date, you want to configure subscription for the report, and set different default values for start date and end date. And you want to know if it is possible to achieve you
goal by using a single report definition file.
Since you are using SQL Server 2008 R2 Standard Edition, we need to achieve your goal by configuring two subscriptions for the report. For detail information, please refer to the following steps:
1. In design surface, right click start_date and open Parameter Properties dialog box.
2. In General pane, type Name and Prompt, set Data Type to Date/Time.
3. Click Available Values in left pane, select Specify Values.
4. Click Add button, in Label text box, type “First day of Current Month”, click (fx) button in Value section, then type the expression like below:
=DateSerial(Year(Now()), Month(Now()), 1)
5. Click Add button, in Label text box, type “First day of Current Quarter”, click (fx) button in Value section, then type the expression like below, then click OK.
=DateSerial(Year(Now()), (3*DatePart("q",Now()))-2, 1)
6. Right click end_date and open Parameter Properties dialog box.
7. In Available Values pane, select Specify Values.
8. Click Add button, in Label text box, type “Today”, click (fx) button in Value section, then type the expression =Today(), then click OK.
Now that the parameters are created, we need to configure subscription for the report. For detail information, please follow these steps:
1. Open Report Manager, and locate the report for which you want to create a new subscription.
2. Hover over the report, and click the drop-down arrow.
3. In the drop-down menu, click Manage. This opens the General properties page for the report.
4. Select the Subscriptions tab, and then click New Subscription.
5. Select the delivery extension and data source for the subscription.
6. Select a method of delivery, then choose report delivery options.
7. Specify conditions that cause the subscription to process and delivery to occur.
8. Set start_date to First day of Current Month, end_date to Today, then click OK.
9. Create a new subscription as step4 to 7, set start_date to First day of Current Quarter, end_date to Today, then click OK.
The following screenshots are for your reference:
For detail information about Creating Standard Subscriptions, please refer to the following document:
http://msdn.microsoft.com/en-us/data/ms156307(v=sql.105)
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.

How to do Default context value For DFF in OAF

Dear all,
I want to do Default context value For DFF in OAF for seeded page, pls let me know how to do.
Regards,
Hanimi

Hi Hanimi,
In controller use code
*dffBean.setFlexContext(pageContext,"+YOUR-LIST-VALUE+");*
*dffBean.setAttributeValue(OAWebBeanConstants.READ_ONLY_ATTR, new Boolean(false));*
Thanks
Jegan

What is the default timeout value for the SPQuery object?

What is the default timeout value for the SharePoint SPQuery object? I've tried searching online but can't find anything with the actual timeout value.
Someone suggested it might use the timeout property in the database? Anyone know if that's how it works?

Hi,
Do you want to avoid timeout when you query list items?
If so, we can use the following C# code to set timeout.
HttpContext.Current.Server.ScriptTimeout = 600; // 10 minutes
More information is here:
http://200oksolutions.blogspot.com/2013/03/sharepoint-2010-set-timeout-only-to.html
The SPQuery object doesn’t provide any property to set timeout. We can also set timeout in web.config, or SQL Connections or IIS.
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

The document could not be saved. A file I/O error has occurred

Hello,
I have scanned PDF files varying in size from < 1,000 pages to > 5,000 pages. I seem to experience this issue on and off on various files regardless of the size. The issue is when I OCR the pdf using Adobe Acrobat X Pro, when it's completed the OCR process and I go to save it errors out with: "The document could not be saved. A file I/O error has occurred"
I have tried:
1. Saving to local hard drive
2. Saving to network drive
3. Renaming file and repeating steps 1&2
4. File/Save as and reducing (but it won't allow me to do so without saving first, lol)
Any thoughts? Thanks so much.
Phil
System specs:
Windows 7 Professional
16 gb RAM
500Gb Hard drive (409gb free)
Adobe Acrobat X Pro
Message was edited by: bldfb024 (system specs included at bottom)

No it is from a disk drive.
Robb Hanke
[signature deleted by host]

Error message "The document could not be saved. This file is already open" when trying to complete an electronic signature.

Running Adobe Acrobat Professional 10.1.0. I cannot upgrade to newer version because several applications were already tested on this version.
When trying to complete an electronic signature, my users receive the error message ""The document could not be saved. This file is already open". When they close and open the file again to try to sign again they find a corrupted electronic signature. Instead of a clean signature with the box colored in light blue they see their signature with the embedeed message Click Here to Verify & Sign with the box colored in grey.
We turned off antivirus in the Sharefolder where the forms are stored and nothing. We turned off the antivirus on the client and nothing. We stored the files in another server and nothing. One workaround is saving the file in the desktop, signing it, and then back to the Sharefolder. Another is saving the file with a different file name.
I've searched and the only similar thing was caused by the Windows Preview Pane. See Information Transmogrification: Adobe Acrobat saving a file does not work, displays “File may be read-only”. No luck with this one too.
Is definitively an intermittent problem. The users that experience the problem experience it intermittently.
This started to happen when we move our computers to Windows 7.
Any ideas?

Correction on Question:
This is a web application and the users need to be able to load the editable .pdf form from the website, edit it and submit it back to the website from within Internet Explorer.
Users began getting the error message:
'The document could not be saved. This file is already open.'
last Friday after having no problems prior to this. Some users can edit the editable .pdf forms on the website and save the file with the same name to the website. Some get the error mentioned in the subject.
We really need help getting this resolved.
Sandy Martin

I keep getting "The document could not be saved. A file I/O error has occurred."

Everytime I try to save a PDF file in Reader X... "save as...PDF" I get the "The document could not be saved. A file I/O error has occurred."
When I save it "save as...Text" is saves.

No it is from a disk drive.
Robb Hanke
[signature deleted by host]

The document could not be saved. This file is already open.

This problem recently developed.with several versions of Acrobat Reader 9.x installed. The full version of Acrobat is not installed.
Users used to be able to open an editable .pdf file in IE, edit it and save it. Some users can no longer do this. The are getting
the error message "The document could not be savedl. This file is already open. Users who are able to save from within a browser, are actually
using Acrobat Reader, which opens when opening the .pdf file from within the browser. Everyone can open Acrobat Reader V 9.x, edit an editable .pdf file and save it. It is just when the .pdf file is opened from a browser application, and the reader is not also launched. Help! This just started happening.
Thanks,
Sandy

Correction on Question:
This is a web application and the users need to be able to load the editable .pdf form from the website, edit it and submit it back to the website from within Internet Explorer.
Users began getting the error message:
'The document could not be saved. This file is already open.'
last Friday after having no problems prior to this. Some users can edit the editable .pdf forms on the website and save the file with the same name to the website. Some get the error mentioned in the subject.
We really need help getting this resolved.
Sandy Martin

Import and default values for columns

Hi guys
I have a table in which there are default values for some columns. I take export of this table.
I go to another database where this table structure is already there (but default values are not set). I run the import of table with ignore=Y. It does all...import the data...create the indexes and all...but doesn't set the default values for the columns.
Shouldn't it do that also ? ignore=Y means that ignore the object creation errors and proceed with the rest of the stuff ? Or there is some problem in my understanding ?
Version 10gR2 on AIX 5.3 and using traditional export/import.
Thanks
Amardeep Sidhu

Hanji Sidhu Sahib.
Mein Tuhade liye eh example try kita hai.
SQL> conn simar/simar
Connected.
SQL> SQL> create table orders (
dept varchar2(20) primary key,
place varchar2(20),
intcol integer default 12
2 3 4 5
Table created.
SQL>
Inserted few values ...........+ commit.
SQL> conn simar/simar
Connected.
SQL> select * from orders;
DEPT PLACE INTCOL
SALES TORONTO 12
HR LA 12
BILLING FLORIDA 12
IT HALIFAX 5
exp simar/simar@RACDB file=exptest.dmp log=exptest.log
rac01:/software/backup>exptest.dmp log=exptest.log <
Export: Release 10.2.0.3.0 - Production on Tue May 6 23:35:58 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options
Export done in WE8ISO8859P1 character set and AL16UTF16 NCHAR character set
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user SIMAR
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user SIMAR
About to export SIMAR's objects ...
. exporting database links
. exporting sequence numbers
. exporting cluster definitions
. about to export SIMAR's tables via Conventional Path ...
. . exporting table ABC 12 rows exported
. . exporting table ORDERS 4 rows exported
. exporting synonyms
. exporting views
. exporting stored procedures
. exporting operators
. exporting referential integrity constraints
. exporting triggers
. exporting indextypes
. exporting bitmap, functional and extensible indexes
. exporting posttables actions
. exporting materialized views
. exporting snapshot logs
. exporting job queues
. exporting refresh groups and children
. exporting dimensions
. exporting post-schema procedural objects and actions
. exporting statistics
Export terminated successfully without warnings.
rac01:/software/backup>strings exptest.dmp |grep -i 'create'
CREATE TABLE "ABC" ("A" VARCHAR2(10), "B" VARCHAR2(10)) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 STORAGE(INITIAL 65536 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "USERS" LOGGING NOCOMPRESS
CREATE TABLE "ORDERS" ("DEPT" VARCHAR2(20), "PLACE" VARCHAR2(20), "INTCOL" NUMBER(*,0)) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 STORAGE(INITIAL 65536 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "USERS" LOGGING NOCOMPRESS
rac01:/software/backup>strings exptest.dmp |grep -i 'alter'
ALTER TABLE "ORDERS" MODIFY DEFAULT
ALTER TABLE "ORDERS" MODIFY ("INTCOL" DEFAULT 12
ALTER TABLE "ORDERS" ADD PRIMARY KEY ("DEPT") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 65536 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "USERS" LOGGING ENABLE
SQL> conn simar/simar
Connected.
SQL> drop table orders;
Table dropped.
imp simar/simar@RACDB file=exptest.dmp log=imp_exptest_1.log tables='ORDERS'
rac01:/software/backup>exptest.dmp log=imp_exptest_1.log tables='ORDERS' <
Import: Release 10.2.0.3.0 - Production on Tue May 6 23:46:48 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options
Export file created by EXPORT:V10.02.01 via conventional path
import done in WE8ISO8859P1 character set and AL16UTF16 NCHAR character set
. importing SIMAR's objects into SIMAR
. importing SIMAR's objects into SIMAR
. . importing table "ORDERS" 4 rows imported
Import terminated successfully without warnings.
SQL> conn / as sysdba
Connected.
SQL> set heading off;
set echo off;
Set pages 999;
set long 90000;
SQL> SQL> SQL> SQL> SQL>
SQL> select dbms_metadata.get_ddl('TABLE','ORDERS','SIMAR') from dual;
CREATE TABLE "SIMAR"."ORDERS"
( "DEPT" VARCHAR2(20),
"PLACE" VARCHAR2(20),
"INTCOL" NUMBER(*,0) DEFAULT 12,
PRIMARY KEY ("DEPT")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS"
SQL>
Here the alter table statement is in the dmp file as well as in the imported table.
Regards

Default cell values for column not properly saved in uir file in labwindows 2009 (9.1.0 427)?

Similar Messages

Maybe you are looking for