Parallel and sequental parts in one file ?

Hi,
The situation is following: there are several units for test (which can be done in parallel), and one routine for initializing interface, which has to be runed once. If i use sequental model with subsequences for parallel tests in case of "run sequence in a new thread" i have problems with generating reports (one report for every unit had to be made), in case of "run sequence in a new execution" i have problems with passing parameters (FileGlobals is not good place for it) but better situation with reports. In Parallel Model it's not clear how to initialise _once_ interface for all units "keeping it simple".
Any helpful ideas are wellcome (generating reports is essential part of tests).

Not fully ,
I need to pass parameters (channel number for example), which are _different_ for every subsequence. I am using sequental model and want to launch subsequences in "New Execution" (to get separate report for _every_ subsequence). But parameters seems to be ignored (except sequence name, 1st parameter) when "Load Prototype" button is used. When i use "New Thread" paramters are passed without any problems, but report is generated in one big file.
I am a newbie to TestStand and I want to use TestStand as sequecer for using DLLs routines. But it seems to me that it is no use for "Batch" or "Parallel" models for bigger tests, where have to be sequental and parallel parts. Usage of this models without changes is not very comfortable. Maybe i am di
gging in wrong direction ? Maybe someone could send me peace of working code where subsequence is called in "New Execution" and few parameters are passed to it ?
p.s. Thanks for previous answer !

Similar Messages

How do I put a DVD in and transfer it as one file to my external?

How do I put a DVD in and transfer it as one file to my external?

What you are referring to is called "ripping". You can use something like HandBrake which is free to do this. HandBrake will not allow you to do this with commercial / encrypted content (e.g. most movies which you might purchase on DVD).
http://handbrake.fr/

Can anyone help me write a code about coping data from many files and paste them to one file !?

Hello !
As I said in title , I have alot files (e.g. 60 files) and I want to write a code to copy 5 columns (for examples) of special sheet of files and paste them in one file respectively. For perceive it I explained it more below .
Suppose one of my files is simplified as this : http://s000.tinyupload.com/?file_id=00699705919876414523
The name of this file is 2006Oct and assume my excel files are like "2006Oct, 2006Nov,2006Dec,2007Jan ... 2010Dec". At first I should go to "my files" sheet of 2006Oct file and copy columns " A,B,C,D,E,F " that has "PerturbationNumber=1"
respectively and then paste these to a file that is output file and repeat this process for the other files ( 2006Nov and etc ) and paste data in output file sequentially.
I appreciate and look foreward for any help in this issue.
Majid

Try code below
Sub CombineBooks()
Dim wb As Workbook
Dim sourceSht As Worksheet
Dim destSht As Worksheet
Set destSht = ThisWorkbook.Sheets(1)
destSht.Cells.Clear
FolderName = "C:\temp\test\"
file = Dir(FolderName & "*.xlsx")
firstSht = True
Do While file <> ""
Set wb = Workbooks.Open(Filename:=FolderName & file, ReadOnly:=True)
Set sourceSht = wb.Sheets(1)
With sourceSht
sourceLastRow = .Range("A" & Rows.Count).End(xlUp).Row
If .Cells.AutoFilter Then
.Cells.AutoFilter 'turn off autofilter
End If
.Cells.AutoFilter Field:=6, Criteria1:="1"
If firstSht = True Then
Set copyRange = .Range("A1", .Range("E" & sourceLastRow)).SpecialCells(xlCellTypeVisible)
destSht.Range("F1") = "FileName"
firstSht = False
destNewRow = 1
Else
Set copyRange = .Range("A2", .Range("E" & sourceLastRow)).SpecialCells(xlCellTypeVisible)
destNewRow = destSht.Range("A" & Rows.Count).End(xlUp).Row + 1
End If
copyRange.Copy Destination:=destSht.Range("A" & destNewRow)
LastRow = destSht.Range("A" & Rows.Count).End(xlUp).Row
If destNewRow = 1 Then
destSht.Range("F2:F" & LastRow) = file
Else
destSht.Range("F" & destNewRow & ":F" & LastRow) = file
End If
End With
wb.Close savechanges:=False
file = Dir()
Loop
End Sub
jdweng

Writing LabVIEW measurements of two loops (Charge cycle and discharge cycle) in one file

Hey,
I was wondering if it is possible to write Labview measurements from two loops (Stacked Sequence Structure) into one file. Currently, it is writing the charging data in one file and discharging data in one file. I have to combine the data everytime to graph the charge and discharge cycles and sometimes there's about 50 cycles and copying and pasting does take up lot of time.
I'll try to upload my vi in a bit
Solved!
Go to Solution.

Hey Mike,
I'm very new to Labview, could you please show an example.
btw, I attached my vi and I didn't build it
Message Edited by Support on 07-15-2009 11:27 AM

IO - Read two image files and put them into one file

Hi,
i have 3 files in all. The two image files and one text file. I need to place the image in the first image file, followed by text in the text file and then the image in the second image file, into one file.
Can anyone tell me how do i go about doing this ?
i tried using fileinputstream and fileoutputstream, which works fine if all the 3 files have text but when the first and the third file have image, the code doesn't give any error but the result file displays only the image from the first file and nothing else.
i am running short of time and need to do this really soon.
if anyone has done anything like this. please let me know,
thanx,
poonam

One approach would be to programmatcally create a single zip/jar file from the three input files. You can use the java.util.zip and java.util.jar packages for this purpose.
The other apprach would be to create a single image by drawing images and text strings on a BufferedImage object.
I think the first approach is preferable because you can easily extract the individual files from the zip/jar file

Application and Oracle software in One file system.

DB Version:11g
We have a relatively busy OLTP financial application installed on the same file system as oracle software (ORACLE_HOME). Is it a good idea to install applications on the same file system as ORACLE_HOME? Will Oracle recommend this?

ExpansiveMind wrote:
DB Version:11g
We have a relatively busy OLTP financial application installed on the same file system as oracle software (ORACLE_HOME). Is it a good idea to install applications on the same file system as ORACLE_HOME?This is a fairly common scenario. As long as
- you have a decent system administratoir who knows how to monitor disk I/O and that monitoring does not show I/O contention
- you have decent (tested) backups and a good database backup strategy
- you are happy with performance
- your compliance auditors are satisfied
then there should be no real issue.
Will Oracle recommend this?Oracle will probably not get involved other than to discuss High Availability scenarios and point you to things like the Maximum Availability Architecture white papers at http://www.oracle.com/technology/deploy/availability/htdocs/maa.htm .
Now if you contracted their consulting/services group, they would likely do an evaluation of your specific needs and likely recommend separating things as a result of that evaluation.

OBIEE Promts Customization and Color,Size (Just one file)

By default, prompt button name will appear as follows:
Now Button Name Go has to change to desired Name
•     Navigate to {OracleBIDir}:\oraclebi\web\msgdb\l_en\messages
•     Open globalfiltermessages.xml file (before opening this file, you better take backup of this file)
•     Locate the following text
<WebMessage name="kmsgGFPGo"><TEXT>Go</TEXT></WebMessage>
•     Edit the text ‘Go’ to your desired text. ---Here I am editing it to ‘Search’
<WebMessage name="kmsgGFPGo"><TEXT>Search</TEXT></WebMessage>
For Color and Size for all promts
•     Navigate to {OracleBIDir}:\oraclebi\web\msgdb\l_en\messages
•     Open globalfiltermessages.xml file (before opening this file, you better take backup of this file) --Locate the following text
<WebMessage name="kmsgGFPGo">
- <text>
FONT COLOR="blue" size="25" bgcolor="#003300">Search</FONT>
</text>"
</WebMessage>
•     Save the changes to file
•     Restart Presentation service
Edited by: user9198108 on Feb 21, 2010 11:50 PM

First of all use the CustomMessages folder when editing the MSGDB:
http://obiee101.blogspot.com/2008/09/obiee-setting-up-custommessages-folders.html
Secondly: Why edit the MSGDB when you are doing CSS Work?
http://obiee101.blogspot.com/search/label/CSS
Thirdly: And you question is?
regards
John
http://obiee101.blogspot.com

Pages '09 integrating straight and curly quotes within one file.

I'm doing an edit in Pages and the document has a mix of straight and curly quotes. I can't seem to find a way to get them all the same. Find-and-replace turns some of the quotes backwards (as in 'em for them) Nothing in the archives addresses this.

Look for patterns in search and replace.
Search for a space + " to get the leading quote and " + space to get a trailing quote.
Or get WordServices to fix all this.
Peter

Scanning multiple pages into one file using MAC

How do I scan multiple pages and save them into one file or document using a MacBook Pro laptop? My printer is an HP Photosmart 7520. When I use this printer and scan from my PC, it does allow me to scan multiple copies and save as one document by just adding pages as I scan. When I scan with my MacBook Pro, it scans each page, however, I don't get any option or choice to save as one document. It automatically saves each page as a separate document.

Try scanning from your Mac. Use Image Capture app in your Applications folder.
Click once on the scanner on the left side, then click on Show Details along the bottom. Along the right side you will see LOTS of options for scanning and saving.
One of those is Format, make the Format PDF. Just below that will be a check box allowing you to scan multiple pages to one file.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Scanning multiple pages to one file

I have a C310a All in One printer/scanner. My computer uses OS X 10.9 and all the drivers are updated. Is there a way to scan multiple pages to one file. I have tried the three methods mentioned in the HP bulletin for Mavericks but I can only scan one page to one file extension.

Welcome to the forums @BPGeneva ,
I understand you are looking to do a multiple page scan and save it as one file. I will do my best to help! The full driver for the C310a is not available with Mavericks. In having said that, you can try using Image Capture to scan multi-page documents.
Click this link and have a look at PrintDoc's suggestion: Re: Scanning multiple pages into one file using MAC
I hope that helps
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Merging Files in to one File

Hi Frnds,
I am working on one scenario
i have to read files from file directory and merge in to one file and place into another file directory.
this is my scenario i written one java map it reads files from File directory and merge it into one file.
i tested my java map in in eclipse its working,
when i add javamap in interface mapping,my sender file adapter reads all files from Directory
then it will give input as Files to java map,
my doubt is Java map take input of all files as input or only one file it takes input.??
Regards,
Raj

Hi Raj,
Raj Says..
my doubt is Java map take input of all files as input or only one file it takes input.??
Java Mapping will take one input file at a time as its input file and will process it.
For three files at source folder; Java Mapping will be called threee times in XI.
regards,
Madan Agrawal

MS word It prints one file for each section of the document

With MS word (2004 and 2008)It prints one file for each section of the document.
somebody can help me with that????

Please post Office related questions on Microsoft's own forums for their Mac products:
http://www.officeformac.com/productforums

Sap fi-sd integration and configuration part

Hi guru,
Please tell me fi-sd integration and configuration part.
every one knows the t.code - vkoa, apart from this, is there any other related configurations..?
Please tell me any other configurations part.
With regards,
Manas

Hi,
It generally depends on your integration scenario
..so surprisingly variety of scenario exists in the world
Please check CR configuration guide in 'SAP Service Marketplace'.
(Latest version is for SAP Enhancement Package 6, ECC 6.0)
System Connections- page 13
Process Integration with SAP Systems- page 57
Best regards,
TED

Idvd project with video and slideshow for dvd-rom file access

working on an idvd project with both a video section and photos in a few photo galleries. its' a slightly more complex project, but still only 2gb on a 4gb disc. After we burn (with all dvd-rom contents checked, and advance>edit dvd-rom contents shows photo files all there) the finished disc doesn't have files available in the dvd-romcontents! its' driving us mad as simpler projects are burning properly, with both photo and video files available. Could there be some kind of conflict occurring? does anyone have any ideas?!
17" Desktop G5 Mac OS X (10.4.2)

Steve,
It sounds like Windows Movie Maker Live was used. The regular WMM will Export to DV-AVI Type I, which will Import into PrPro much better.
I would recommend converting the WMA/WMV to DV-AVI, and Importing that into a DV NTSC (if you are in NTSC-land) Project.
Then, you would use Encore to do the DVD authoring. There are several ways to get the material on your Sequence into Encore. ADL (Adobe Dynamic Link) is probably the easiest way to do this.
What is your exact workflow from PrPro, into Encore?
What brand of blank media are you burning the DVD to?
This ARTICLE will give you some tips.
Good luck, and let us know a bit more,
Hunt
PS - Multiplexing is the function of combining the Audio and the Video into one file. There are usually two choices, "None" and then often "DVD." For None, you will get two separate files - one for the Audio and one for the Video. With "DVD" you should get a muxed (combined) file. Actually, the separate Audio and Video is the preferred way, if one is doing an Export from PrPro, and then an Import to Encore. One would Import the Video into Encore as a Timeline, and the Audio as an Asset. In Encore, just drag the Audio file from the Project Panel to the appropriate Timeline, where it will snap into place.

How can I copy part of a larger PDF file and create a smaller one?

How can I copy part of a larger PDF file and create a smaller one?

Hi,
Copy the content of PDF file in Adobe Reader and paset it to MS Word then create PDF file from the Word file.
This may not work for all PDF files as some PDF files are not created correctly or some content cannot be copied.
Acrobat XI Pro has features to extract/delete/crop pages in PDF files and you can download it from www.adobe.com(Trial version- 30 days free). Or you can upgrade your subscription to Acrobat Plus and see more information at https://www.acrobat.com/acrobatplus/en/home.html
Hisami

Parallel and sequental parts in one file ?

Similar Messages

Maybe you are looking for