Parallel Processing in Client Copy

Dear Experts,
I would like to know if it is possible to increase the parallel processing while Client Copy is in progress?
If not, is there any way to speed-up the process.
Also, if you please let me know how I can find out the CC is progressing. For our case, the client copy is running for a very long time and the last updated table contains huge data. Now, checking from tablespace in OS level (or DB02), I am not able to understand if the copy is going ahead or its is stuck somewhere. There is no error message displayed so far.
Your quick inputs are appreciated.
Thanks & Regards,
Sujit.

Hi,
You are doing client copy on existing client or new client ??
If it is existing client, then it will take time depend upon the data, becoz when you do client copy it will first delete the data from exisiting client and then it copy the new data.
Thanks
Anil

Similar Messages

Error in Post processing of Client Copy

Hi,
While doing a Client copy, i am facing an error in Post Processing step.
Its getting hanged saying:
"Client copy is completed with status "Post-Processing Required". There is an error in log for object FINB-TR-DERIVATION"
Please help me out of this error.
Regards,
Twinkle

Hi Twinkle,
I got the same error while doing client copy.
During processing of client copy there was huge workload into your system. But due to workload into the system, these tables weren't created as fast as needed by Client Copy process.
This is the reason it failed in post processing step.
You can go thru the note 1235955.
Hope this will solve your problem.
Regards,
Habeeb

Can a client be refreshed with client copy?

I created a new client by
doing client copy from client 200 creating client 202
Now I want to refresh client 202 from client 200 (ALL ON SAME SERVER) , can I just re-run the client copy with source client being client 200 to client 202?
If so what am I to expect?
If not, then do I need to first drop client 202 and then do the client copy to re-create the client?
maria

Dear Maria,
Greetings!
To be clear, now your situation is to have a client copy from your Production client 200 to the Quality client 202.
Coming to the status of other clients in Quality system, the data or any other settings of the other clients is NOT going to be changed because of this client copy.
As far as the configuration part, you will have to perform the following functionalities in your Target client (Quality - 202)
1. Transaction SCC9 - Select Profile - Choose the SAP profile as per your need.
2. Enter the RFC destination to the Source system client - Production Client 200 - This RFC destination could be an already existing connection between both the systems or a newly created one.
3. Make an RFC system comparison to be sure that the connection is perfect.
4. Set-up the parallel processing parameters, Menu option Goto - Parallel Process. This option is dependent on the physical memory availability of the Quality server.
5. Execute a TEST RUN, prior to start of the actual client copy to verify Target client feasibilities. In case of any mismatch in table definition or table fields corresponding action has to be performed.
Please remember the following pre-requsities before starting the client copy.
1. Both the Source and Target client is to be locked against access to end users or other users. For a pre-caution lock all the users except SAP*, DDIC, TMSADM, BASIS and other System Admin users in both the clients.
2. No auto-logout parameters or restrictions on workprocess runtime exists as profile parameters in the system.
3. Additional space for a client is available in the database so the the client copy in not interrupted.
Kindly process the client copy in a server session such that network interruptions and other interruptions could be avoided.
Kindly revert in case you need further informations on the same.
Thank you
Regards,
Vineeth

Client Copy error during client export / RX file is not getting

Hi Experts,
During the client export process of client copy in order to created two tranports requests(<SID>KT* and <SID>KX) for import we need to have the RT and RX files in data file folder and RT and RX in Co-file folder of usr\sap\trans. But I am getting all exceot RX which contains the client specific texts and forms. Hence I couldn't able to generated the second request <SID>KX.
In the transport log it is saying the package 'BCSC' doesn't exitst and some objects are not entered in the object directory.
Please advice me whether I can proceed the import with the available KT* request which conatinas client specific data and hence avoid the KX* request or please let me know whether there is any option to avoid this error while during a fresh export again.
Regards,
Haris

Hi Experts,
During the client export process of client copy in order to create two tranports requests(<SID>KT* and <SID>KX) for import we need to have the RT and RX files in data file folder and RT and RX in Co-file folder of usr\sap\trans. But I am getting all exceot RX which contains the client specific texts and forms. Hence I couldn't able to generated the second request <SID>KX.
In the transport log it is saying the package 'BCSC' doesn't exitst and some objects are not entered in the object directory.
Please advice me whether I can proceed the import with the available KT* request which conatinas client specific data and hence avoid the KX* request or please let me know whether there is any option to avoid this error while during a fresh export again.
Regards,
Haris

Client Copy error during client export / RX file is not getting generated

Hi Experts,
During the client export process of client copy in order to created two tranports requests(<SID>KT* and <SID>KX) for import we need to have the RT and RX files in data file folder and RT and RX in Co-file folder of usr\sap\trans. But I am getting all exceot RX which contains the client specific texts and forms. Hence I couldn't able to generated the second request <SID>KX.
In the transport log it is saying the package 'BCSC' doesn't exitst and some objects are not entered in the object directory.
Please advice me whether I can proceed the import with the available KT* request which conatinas client specific data and hence avoid the KX* request or please let me know whether there is any option to avoid this error while during a fresh export again.
Regards,
Haris

Hi Experts,
During the client export process of client copy in order to create two tranports requests(<SID>KT* and <SID>KX) for import we need to have the RT and RX files in data file folder and RT and RX in Co-file folder of usr\sap\trans. But I am getting all exceot RX which contains the client specific texts and forms. Hence I couldn't able to generated the second request <SID>KX.
In the transport log it is saying the package 'BCSC' doesn't exitst and some objects are not entered in the object directory.
Please advice me whether I can proceed the import with the available KT* request which conatinas client specific data and hence avoid the KX* request or please let me know whether there is any option to avoid this error while during a fresh export again.
Regards,
Haris

Error in client copy - EFG_FORM_CC_EXIT_AFTER

Hi,
I am getting the following error while doing client copy,
it has copied all the tables , but at the end it gives message,
===============================================
Target Client           500
Source Client           000
Copy Type               Local Copy
Profile                 SAP_CUST
Status                  Successfully Completed
User                    SAP*
Start on                26.09.2007 / 01:48:17
Last Entry on           26.09.2007 / 02:56:00
Statistics for this Run
- No. of Tables             53644 of     53644
- Deleted Lines                 2
- Copied Lines            5090006
arnings and Errors
Table Name              Component Package
EFG_FORM_CC_EXIT_AFTER CA-GTF-PWB Program Exit has Syntax Errors
EFG_FORM_CC_EXIT_BEFORE CA-GTF-PWB Program Exit has Syntax Errors
============================================================
please advice.
regards,
SM

Hi Shark,
Your client copy seems to be ended with just warnings. As mentioned, please correct those 2 forms in the source system and try to import to target client. Discuss with apps member whether they need these 2 mentioned forms. If they don`t need it ,you can ignore the warnings.
Perform post processing after client copy.
regards,
Vinodh.

Parallel process Before Remote client copy

i m going to perform remote client copy from production to sandbox how to enable parallel processing before that .
and its is hugh client and i want to do it fast can i start it in Foreground and if yes what parameter i have to set to what value to do it in foreground

Hi,
As far as i know there is no tcode where you can set parallel processing, you can just select remote cleit copy or local client copy this methods have parallel processing .
Regards,
Vamshi.

Local Client Copy Error in Post-Processing

Hello All,
We are facing issues in local client copy on SRM 5.5 system Basis 700 SP19 with Oracle Db. I have ran the same twice. Also performed the update statistics on db.
All the tables are getting copied but the error or warning is occuring in "Post-Processing" phase.
Table Name Component Package
/SAPCND/CC_GROUP_WS_NG AP-PRC-CON Post-Processing Required
Following entires in the file logs are displayed:
Begin of GEN_STATUS Update
Generation of working set structure /1CN/WS_ID_200MOM_TAX started.
No fields in structure /1CN/WS_ID_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_IS_200MOM_TAX started.
No fields in structure /1CN/WS_IS_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_ED_200MOM_TAX started.
No fields in structure /1CN/WS_ED_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_ES_200MOM_TAX started.
No fields in structure /1CN/WS_ES_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_UI_200MOM_TAX started.
No fields in structure /1CN/WS_UI_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Begin of GEN_STATUS Update
Its help says "Postprocessing necessary when upgrade has been completed. For a more detailed description, see the previous message /SAPCND/GENERATOR381.Message no. PU139"
Can anyone guide me the best way forward.
Thanks,
Antarpreet

Hello Gagan,
I am facing the errors in table /SAPCND/CC_GROUP_WS_NG belonging to component AP-PRC-CON. It says post processing required.
The oss note says about component FINB-TR-DERIVATION.
I am not sure whether it is good to run the steps as mentioned in oss note 1235955.
Thanks for your response and look forward to further help.
Regards,
Antarpreet

Local Client Copy error in post processing phase

Hello All,
We are facing issues in local client copy on SRM 5.5 system Basis 700 SP19 with Oracle Db. I have ran the same twice.
All the tables are getting copied but the error or warning is occuring in "Post-Processing" phase.
Table Name Component Package
/SAPCND/CC_GROUP_WS_NG AP-PRC-CON Post-Processing Required
Following entires in the file logs are displayed:
Begin of GEN_STATUS Update
Generation of working set structure /1CN/WS_ID_200MOM_TAX started.
No fields in structure /1CN/WS_ID_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_IS_200MOM_TAX started.
No fields in structure /1CN/WS_IS_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_ED_200MOM_TAX started.
No fields in structure /1CN/WS_ED_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_ES_200MOM_TAX started.
No fields in structure /1CN/WS_ES_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_UI_200MOM_TAX started.
No fields in structure /1CN/WS_UI_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Begin of GEN_STATUS Update
Its help says "Postprocessing necessary when upgrade has been completed. For a more detailed description, see the previous message /SAPCND/GENERATOR381.Message no. PU139"
Can anyone guide me the best way forward.
Thanks,
Antarpreet

Hi,
You need not worry at all as this is not a warning (although marked
so in message), and its just an information so you are better able to run
the job RGUGBR00 in SE38 with all the options mentioned in message above
marked.
Regards,
Aidan

Error in Client Copy--Work process restarted

when i am doing a Client copy of the SAP_CUST profile
i am getting the following error.
<b>"work process restarted"</b>
Pls help

Hi,
Run it again, but run in background.
Thanks, then keep looking at scc3.
thanks,

In Process Workflow Issue after Client Copy

Hi
We have made a client copy on our training system and wish to process workflow that were created on the original client. Currently, of course, all the workflow instances have the original client. Is there a way we can change this to the new client?
Regards
Ian

Looks like there is something the basis boys ran to update these instances (and any other non workflow related thinks). It is all part of the client copy process apparently.
Cheers
Ian

Processing (Restart) Error while doing Local Client Copy

Hi Experts,
We are facing an issue while doing Client Copy.
Version : EHP7 (IDES)
Please help me out for this.
Thanks
J jana

Sorry Please find the log file.
2 ETA297 Error: Table "/1FB/MD___M80001" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M80001 does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M80002" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M80002 does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M80003" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M80003 does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M80004" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M80004 does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M80005" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M80005 does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M80006" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M80006 does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M80007" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M80007 does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M80008" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M80008 does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M80009" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M80009 does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8000A" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8000A does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8000B" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8000B does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8000C" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8000C does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8000D" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8000D does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8000E" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8000E does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8000F" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8000F does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8000G" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8000G does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8000H" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8000H does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8000I" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8000I does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8000J" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8000J does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8000K" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8000K does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8000L" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8000L does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8000M" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8000M does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8000N" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8000N does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8000O" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8000O does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8000P" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8000P does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8000R" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8000R does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8000S" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8000S does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8000T" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8000T does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8000U" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8000U does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8000V" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8000V does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8000W" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8000W does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8000X" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8000X does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8000Y" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8000Y does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8000Z" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8000Z does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M80010" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M80010 does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M80011" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M80011 does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M80012" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M80012 does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M80013" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M80013 does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M80014" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M80014 does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M80015" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M80015 does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M80016" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M80016 does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M80017" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M80017 does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M80018" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M80018 does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M80019" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M80019 does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8001A" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8001A does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8001B" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8001B does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8001C" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8001C does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8001D" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8001D does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8001E" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8001E does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8001F" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8001F does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8001G" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8001G does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8001H" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8001H does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8001I" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8001I does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8001J" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8001J does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8001K" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8001K does not exist" " "
2 ETA297 Error: Table "/1FB/MD___M8001L" error in DDIC - Check table with SE14
2 ETA533 "Could not generate the data object; the type /1FB/" "MD___M8001L does not exist" " "
I got like above log file.
Please help me.
Thanks
J Jana

Remote Client Copy Errors

Dears,
Today I am going to do remote client copy from PRD to QAS.
For it yesterday i scheduled Test run in simulation mode.As i am having two CPU for both Dev and PRD so I scheduled it with 6 Parallel Processes.
But my Test run failed with errors:
Copy Type                   Remote copy
                                  Test Run
Profile                          SAP_ALL
Status                          Ended with Errors
User                             SAP*
Start on                        14.08.2008 / 01:30:54
Last Entry on                14.08.2008 / 05:57:54
Statistics for this Run
- No. of Tables                 30,806 of       30,808
- Deleted Lines                     15
- Copied Lines               72748,776
Warnings and Errors
Table/Object       Component                Error
BKPF                 FI                       Read or Conversion Error
BSIS                   FI                       Read or Conversion Error
Thus showing read or Conversion Error in these two tables.
In System log of source system I also see these error:
ORA-01652 unable to extend temp segment by 2560 in PSAPTEMP
Database Error 1652 at SEL access to table BKPF.
Database Error 1652 at SEL access to table BSIS.
Please suggest how to resolve the issue.
Shivam
Edited by: Shivam Mittal on Aug 14, 2008 6:08 AM

Hello Shivam
How is your remote copy going on?
Did you increase the size of psap temp in order to carryon with the copy?
Your Source system is PRD system.Are you doing this copy while users are using the PRD system.
If not then this may not be result of client copy? or
if no user is logged in in your PRD system,You have to decide if this is due to client copy.
Let me know what corrective measure taken by you to completed the remote client copy?
normally we dont get this dump in the source system but I have psaptemp around 30 GB or more in al my systems so may be this might have not surfaced in my environment.
Thanks
Amit

Remote client copy performance

Hello experts,
I need an opinion on following possibilities that could speed up remote client copy:
Increasing maximum number of processes for parallel processing in dialog mode?
Increasing the update processes?
Decreasing the undo retention from default 900 seconds to 600 seconds (Oracle) ?
Increase the number of redo log files?
An opinion or any other insights would be highly appreciated.
Thank you,
Rohit

Well, the answer is maybe.
You did not supply any information about your run and your system, how can we give you good advice? Any of your proposals might speed up the copy process, but we cannot tell (well decreasing the undo retention and changing the update work processes will not change much). If your hardware (cpu/disk/network) is not exhausted, then increase the number of parallel processes.
Besides that these notes contain good hints regarding copy speedup:
[489690 - CC INFO: Copying large production clients|https://service.sap.com/sap/support/notes/489690]
[446485 - CC-ADMIN: Special copying options|https://service.sap.com/sap/support/notes/446485]
Cheers Michael

How to assign values to server group when you parallelly client-copying

Hello all,
I'm now trying to create server group.
Currently, I use serial process, or default settings, when client-copying.
But I want to implement this in parallel processes.
Due to this, I have to create server group and assign a lot of values to something I don't know!
I want to create a server group, but don't know how to assign values to ones like "Max. requests in queue", "Max. no of logons" and so on.
Could you please advise me how to allocate values to the resourses shown below;
Advanced : 1 *I think "1" is the flag for advanced settings
Max. requests in queue
Max. no. of logons
Max. disp. of own logon
Max. no. of WPs used: *should be the total of SM50, I guess
Min. no. of free WPs
Max. no. of comm. entries
Max. wait time
thanks in advance,
Hozy

Hi,
Would you check this [Parallel Processes |http://help.sap.com/saphelp_sm32/helpdata/EN/e8/df959834ac11d586f90000e82013e8/frameset.htm] and [Parallel processes FAQ|http://www.saptechies.com/ccinfo-parallel-processes-faq/] i hope will get some hint.
Regards
Mohan Rao

Parallel Processing in Client Copy

Similar Messages

Maybe you are looking for