Parallel Row Code option
using OWB 10.1.0.5 /RDBMS 902
i create a simple mapping that extract data from Dept table and load it into dept2 table . when i change the mapping's option parallel row code option to false then the mapping deploy and run successfully but when i change the mapping's option parallel row code option to true then the mapping deploy and run with the following error
VLD-1127: The bound objects in the mapping operator are not from the same module. Set the Parallel Row Code Option to FALSE.
when i test the same mapping on OWB 10.2.0.1 not OWB 10.1.05 i didn't got this error . so is it a bug on OWB 10.1.0.5 or not ?
Hi,
I suggest you read chapter 11 from the OWB User Guide called "Configuring ETL Objects". This provides a decent overview of when which sorts of operators are allowed for which operating mode. Sequences are indeed tricky operators...
As far as the error goes, unfortunately there is no way to look up the VLD-errors... if there is I'm convinced there are quite some developers out there (myself included) that would like to get their hands on that.
The exact error message certainly implies that the sequence is the source of all your problems, unfortunately I cannot provide you with any suggestions since I haven't encountered this situation myself. The name sort of tells me you're trying to load a dimension, got a number of mappings loading data into dimensions myself (all MERGE), never encountered problems with the sequences I use there... but I don't use the parallel option so that doesn't really make it a valid comparison.
Where exactly have you positioned the sequence, what are the attributes of the target dimension where you use that sequence, and which version do you use?
Good luck, Patrick
Similar Messages
-
svg code option is deactivated in svg options dialogbox. How i can activate?
Thanks
Now problem has been solvd. -
Tax code optional in document type for one company code
Hello experts,
Is it possible to make tax code optional in a document type only for one company code. If yes kindly explain me the process in detail.
Regards,
P.Krishna Chaitanya.Hi
If I understand your requirement correctly that for a particular document type, the line item should not contain a tax code, while for other Document Types, it should have a tax code. Note, the logic for making tax code optional/mandatory is made through the field tax category in the GL Master and not through the field status. further Build in a validation rule, using a logic as follow:
BKPF-BLART IN "SET NAME"
Check BSEG-MSKWZ<> ' '
Set an Error message
You can also create a subsitituion rule for populating tax code with a blank value if a particular doc type is used.
BKPF-BLART in 'SET NAME"
Substitute BSEG-MSKWZ= ' '
You may need to allow tax code as a field to be substituted in the maintainence view of table GB01 using T Code SM30 for boolean class 9
Regards
Sanil -
I have one software product that runs on Windows but do not have windows on my mac. Is parallels the best option to be able to use my windows based software
It would be a good choice. Other choices are:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
1. Install the Apple Boot Camp software. Purchase Windows
XP w/Service Pak2, Vista, or Windows 7. For Boot Camp
4.0 and above you can only use Windows 7 or later. Follow
instructions in the Boot Camp documentation on
installation of Boot Camp, creating Driver CD, and
installing Windows. Boot Camp enables you to boot the
computer into OS X or Windows.
2. Parallels Desktop for Mac and Windows XP, Vista Business,
Vista Ultimate, or Windows 7. Parallels is software
virtualization that enables running Windows concurrently
with OS X.
3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
or Windows 7. VM Fusion is software virtualization that
enables running Windows concurrently with OS X.
4. CrossOver which enables running many Windows
applications without having to install Windows. The
Windows applications can run concurrently with OS X.
5. VirtualBox is an Open Source freeware virtual machine such
as VM Fusion and Parallels that was developed by Solaris.
It is not as fully developed for the Mac as Parallels and VM
Fusion.
Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech Labs- Virtualization Benchmarks, January 2013 | MacTech for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive. -
How Can I Create a Coupon Code On My Form?
Is it possible now with Adobe Central forms in 2014? I don't want to go back on Jotform, but I do need the coupon code option.It will be nice if you can say How you solved this issue.
-
IB Section Index Row Count option
I was wondering what the option "Section Index Row Count" in Interface Builder does?
There's no option to tell IB how many sections there are in a UITableViewController and I thought that was the purpose of the methods numberOfSectionsInTableView and numberOfRowsInSection.
I'm new to iPhone programming but it seems to ignore whatever you set in IB and uses the methods defined in UITableViewControllerI haven't read your code, but can make a guess at what's going wrong. Checkboxes do behave in a weird manner depending upon whether you have selected one or many.
Assuming this is the statement where you are generating the checkbox :
<input type="checkbox" name="checkBoxName" value="<%= someValue %>">
What you could do is read the checked checkBoxes in an array :
String[] values = request.getParameterValues("checkBoxName");
int sizeOfValues = values.length;
Then use the sizeOfValues to perform your delete action :
if (sizeOfValues==1)
performDelete();
else
for (int i=0; i<sizeOfValues(); i++)
performDelete();
Hope this technique works. -
Problem in fetching row code...
Hi there,
I have a bit of a problem setting up automatic row processing. The Apex processing is causing an error, but I'm not sure what PL/SQL code is being run (obviously, I don't have access to the Apex code) and all I get is the error following:
0.03: Processing point: AFTER_HEADER
0.03: ...Process "Fetch Row from VMS2_VU_VEHICLE_DETAILS": DML_FETCH_ROW (AFTER_HEADER) F|#OWNER#:VMS2_VU_VEHICLE_DETAILS:P21_ID:ID
0.05: Show ERROR page...
0.05: Performing rollback...
0.05: Processing point: AFTER_ERROR_HEADER
and then the following exception report on the page:
ORA-06550: line 1, column 17: PL/SQL: ORA-00936: missing expression ORA-06550: line 1, column 9: PL/SQL: SQL Statement ignored
Can anyone tell me how I can diagnose the problem?
please ,
Thanks in Advance
Ahmed ,Go to apex.oracle.com, use the Request a Workspace link, submit a request, wait for approval, then import your app into your workspace.
Create a table in your workspace schema using the SQL Workshop so that you can get the same error message when you run that form page that's giving you trouble.
When you get to that point, just tell me your workspace name and application ID.
Scott -
I was executing the following code in Excel 2013 that is linked to a button I use to add multiple rows in a chosen section of a worksheet
Sub Add_Rows_dc()
Sheet53.Unprotect ("xxx")
X = Range("C1").Value + 1 'Section Counter
Y = ListSheet.Range("I" & X).Value 'Existing rows counter
Z = ListSheet.Range("H" & X).Value 'Position counter
Righe = InputBox("How many rows would you like to add?", , "1")
If Righe < 1 Then GoTo err ' test for invalid row number
RigheSheet.Rows(X).Copy
Rows(Z - 1 & ":" & Righe + Z - 2).Insert Shift:=xlDown
GoTo Fine
err:
Mess = MsgBox("PLEASE INSERT A VALID NUMBER OF ROWS", vbCritical)
Fine:
'Formulas update
Z = ListSheet.Range("H" & X).Value 'Position counter update
Range("U" & Z - Righe - 2 & ":AF" & Z - 2).FillDown
Sheet53.Protect "xxx", , , , , True
End Sub
From time to time it returns me the error "2147417848 The object invoked has disconnected from its clients" and the debug point out the line
Rows(Z - 1 & ":" & Righe + Z - 2).Insert Shift:=xlDown
I cannot find any specific reason due to the fact that the error seems randomic, sometimes the code is perfectly executed, sometimes not.
I wrote this piece of code in Excel 2010 and never encountered such problem before reusing it in Excel 2013
Has someone an insight or a suggestion?
Thank you very muchRe: strange error
Try it this way...
(might work, might not)
Sub Add_Rows_dc_R1()
Dim X As Double
Dim Y As Double
Dim Z As Double
Dim Righe As Variant
Dim Mess As Long
Sheet53.Unprotect ("xxx")
X = Range("C1").Value + 1 'Section Counter
Y = ListSheet.Range("I" & X).Value 'Existing rows counter
Z = ListSheet.Range("H" & X).Value 'Position counter
Righe = InputBox("How many rows would you like to add?", , "1")
If Righe < 1 Then GoTo errX ' test for invalid row number
RigheSheet.Rows(X).Copy
Rows(Z - 1 & ":" & Righe + Z - 2).Insert Shift:=xlDown
GoTo Fine
Fine:
'Formulas update
Z = ListSheet.Range("H" & X).Value 'Position counter update
Range("U" & Z - Righe - 2 & ":AF" & Z - 2).FillDown
Sheet53.Protect "xxx", , , , , True
Exit Sub
errX:
Mess = MsgBox("PLEASE INSERT A VALID NUMBER OF ROWS", vbCritical)
End Sub
Jim Cone
Portland, Oregon USA
free & commercial excel programs (n/a xl2013)
https://jumpshare.com/b/O5FC6LaBQ6U3UPXjOmX2 -
Not abel to find generate code option for android
Hi All,
we have SUP 2.1 ESD #1 implemented in our environment and trying to generate the code for android platform for whihc we are not to find in the option in SDK. when we try yo generate the code in SDk we are abel to find it for IOS, BB platfoms and not for android. after applying EBF 19762 restarted the server and still we are not able to see it.
we wanted to know how to generate the code for android mobilre?
please do the needful.
thanks
SKYou're right.
SK, please take a look here:
[http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc01726.0211/doc/html/apr1323303877111.html] -
How to enable edit mode to company code option in the copied PO in SRM 7.0?
Hello all,
Another strange requirement!
When we copy an old PO or when we reopen a saved PO, the Company code drop down option is freezed at the header part of the PO. How to enable this option for the user to edit the company code further?
Regards
MadhanHI Madhan,
As far as I know, the behavior you have mentioned is Standard behavior of SAP SRM. You are copying an old Purchase Order to create a new PO, the system assumes that all the important header information is same (that is the reason you are using the copy functionality) and gets copied to new PO.
When it comes to 'Saved PO' the system initially determines the company code from the organization assignment of the buyer who created the purchase order.
In such cases, I hope, the user can create multiple purchase orders with different company codes and treat them as templates.
This can be a workaround for the functionality your customer is looking for.
Thanks and regards,
Ranjan -
Hello Everyone.
I have a requirement where I need to fork 5 parallel tasks ( all different subprocess), wait for 4 to finish and complete the join but let the 5th one be optional. It means that The join does not need for the 5th task to be completed. The 5th subprocess again forks off multiple tasks ( all same task this time) which may be treated as separate tasks and has no dependency on each other, can be performed at any time. This means that they dont have to join for the 5th subprocess to be end.If you just want any 4 of the 5 to complete before continuing, add a new integer instance variable. In your Join activity, add this logic:
counter = counter + 1
if counter > 3 then
action = RELEASE
end
If it's one specific subprocess you do not want to wait for, create 4 Boolean instance variables that represent each of the manditory subprocesses. Each of these would be set to true as their copy spawned by the Split reaches the Join activity. Your logic in the Join would look like this:
case copy.activity.source.id
when "IdOfSubflowActivity1" then
flag1 = true
when "IdOfSubflowActivity2" then
flag2 = true
when "IdOfSubflowActivity3" then
flag3 = true
when "IdOfSubflowActivity4" then
flag4 = true
end
if flag1 && flag2 && flag3 && flag4 then
action = RELEASE
endDan -
How to get all rows in table to red using alternate rows properties option
How to get all rows in table to red using alternate rows properties option
Hi Khrisna,
You can get all rows red by selecting the color red in the "Color" and "frequency" to 1 under the "Alternate Row/Column colors".
I tried doing it and the colors freaked me out (all red) :-D
Kindly tell me if im missing something.
Regards,
John Vincent -
Multiple tax code option and add tax code at the time of Import
Is there a way using which we can add multiple tax codes to a Products. Also is it possible that we apply this tax code to products at the time of Product import instead on manually updating this to each product.
Regards
LeenaHi Leena,
As per the system design, you can't add multiple tax codes to a product. You can update the tax code using Product import feature. For info on product import, Please refer to the following link http://helpx.adobe.com/business-catalyst/partner/product-inventory.html
Regards,
Aish -
I am running a web-based CMS that cycles through a number of pages, each for different times ( ranging from 40 seconds to 2 minutes )and is displayed in a number of shops. Every now and then our internet drops, and the page errors with connection failed. I’m wondering if there is anyway to auto reload the page as soon as the error connection failed is showing. auto-reload addon is not an option as this will interrupt the sequence.
The following error was encountered:<br />
<br />
<ul><li><b>Connection Failed</b></li></ul><br />
<br />
This means:<br />
<br />
<pre>I am running a web-based CMS that cycles through a number of pages, each for different times ( ranging from 40 seconds to 2 minutes )and is displayed in a number of shops. Every now and then our internet drops, and the page errors with connection failed. I’m wondering if there is anyway to auto reload the page as soon as the error connection failed is showing. auto-reload addon is not an option as this will interrupt the sequence.
The following error was encountered:<br />
<br />
<ul><li><b>Connection Failed</b></li></ul><br />
<br />
This means:<br />
<br />
<pre> -
Where is "Attach Code" option???
When posting a new topic, there is a note that states:
Please use "Attach Code" to include any sample code in the
message.
However, there is no button that allows you to do this. Can
we get this fixed?That feature is disabled in this forum, for some reason. It
really bites. Adobe is working on the forums constantly, we can
hope this will be fixed soon.
Tracy
Maybe you are looking for
-
HP StorageWorks Ultrium 960 not showing up in windows
hi everyone i have a HP StorageWorks Ultrium 960 - model q1538a - whic i have connected to a adaptec scsi 39160 problem i have is that the device is seen in device manager which it says device is working and drivers are upto date but cant see the
-
Ext HD recognized but won't mount
Trying to use my firewire/usb ext HD. It is recognized in disc utility and system profiler, but won't mount. I honestly can't remember whether the HD was disconnected or turned off before unmounting, but that's my suspicion. Tried connecting through
-
How to flash vBIOS GX60 Destroyer
I have a problem with my gx60 and I think it's a VBios bug, also I found the MSI tutorial to flash the vbios with DOS but when I try to execute the fvbios.bat, it says atiflash.exe -p 0 -f wrong command or file, and if I try to execute atiflash.exe i
-
I want my nano to update like my shuffle, but no luck!
the one thing i loved about my shuffle was it's ability to be inserted and automatically fill with ONLY the EXACT amount of songs that space would allow. on my nano, i've been trying to do it manually, only to find that it will fill only as far as it
-
IPhone 3G won't update to 2.1; claims unknown error (-19)
Hi guys. Trying to update my vanilla 3G (which was only restored two days ago) to the 2.1 update today and it simply won't update. It manages to download correctly but just after 'extracting' it fails. I've restarted the phone, i've restarted iTunes,