Parameter CPU_PER_SESSION and CPU_PER_CALL

Hi,
I created a profile with the following parameters for the new users
SESSIONS_PER_USER 3
CPU_PER_SESSION 2000
CPU_PER_CALL 2000
CONNECT_TIME 1
IDLE_TIME 2
My question is:
How know if my query is consuming more than 20 seconds processor time?
thank

GV$SQL has column CPU_TIME and EXECUTIONS which show the total CPU time consumed by a particular SQL statement along with how many times it has been executed. If you divide the two, that should give you the average CPU time per execution. If the CPU time is relatively constant across executions, that should be a reasonably accurate figure. If there is a lot of variability, however, it's going to be less useful (unless you want to cut off longer-running versions of the query).
Justin
Edited by: Justin Cave on Feb 29, 2012 4:27 PM

Similar Messages

Issue on How to mimic Deski document from CMS to local machine, pass parameter, execute and save in a mutiple report format then store in a network drive.

Post Author: usaitconsultant
CA Forum: JAVA
Would you know if there's a way to mimic Deski
document from BOXI server(CMS) to local machine, pass parameter, execute and
save in a mutiple report format then store in a local drive or network
drive? Most examples and tutorials in BO XI R2 I've seen are scheduling while drilling report is for web intelligence only and not desktop intelligence. Please let me know your ideas. I would really appreciate your help. Thanks.

Post Author: usaitconsultant
CA Forum: JAVA
Hi Ted,
Thanks for the reply.The file is not available in the server. Though, I checked CMS and I found an instance in history tab and the status is failed with error below.
Error Message:
A variable prevented the data provider Query 1 with BANRRD30 from being refreshed. (DMA0008).When I checked my codes, I found out that the object Im using is for web intelligence data provider. However, I cannot find any documentation and example for passing parameter values in desktop intelligence data provider. Any idea on this? You think this is not suported by Report Engine SDK?Thanks.

Difference between AFTER PARAMETER FORM and BEFORE REPORT in Reports 6i

Hi Aii,
What is the difference between AFTER PARAMETER FORM and BEFORE REPORT in Reports 6i.
Thanks in Advance,
Balu

Hi Balu.,
As per my findings the After Parameter is fired after the Parameters are given to the report and Before Report fires when the queries are parsed and data is fetched.
Regards.,
Vijay G

How to mimic Deski document from BOXI server to local machine, pass parameter, execute and save in a mutiple report format then store in a network drive.

Post Author: usaitconsultant
CA Forum: JAVA
To Guru's, Would you know if there's a way to mimic Deski document from BOXI server to local machine, pass parameter, execute and save in a mutiple report format then store in a local drive or network drive? Most examples and tutorials in BO XI R2 I've seen are scheduling while drilling report is for web intelligence only. Please let me know your ideas. I would really appreciate your help. Thanks.

Give Chronosync a go - have been using for over a year and it works great; if you like Syncback you'll like this app.

The types of the parameter field and parameter field current values are not compatible.----

HI,
I am attempting to set report parameters in my .jsp code via URL parameters.
I am able to set the report name, server connection dynamically however when attempting to set the Parameters I receive:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKParameterFieldException: The types of the parameter field and parameter field current values are not compatible.---- Error code:-2147213303 Error code name:invalidParameterField
The parameter on the report is a String Type, named for this example p1.
The value that p1 represents is LERAD
My code:
String stringValue = request.getParameter("p1");
CRJavaHelper.addDiscreteParameterValue( clientDoc, "","p1", stringvalue);
returns the above mentioned error.
I have tried:
String stringValue = (String)request.getParameter("p1");
which returns the above error
And;
String stringValue = new String(request.getParameter("p1")).toString();
which returns
java.lang.NullPointerException
java.lang.String.<init>(Unknown Source)
org.apache.jsp.callReport_jsp._jspService(callReport_jsp.java:105)
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
javax.servlet.http.HttpServlet.service(HttpServlet.java:722)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:432)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:390)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:334)
javax.servlet.http.HttpServlet.service(HttpServlet.java:722)
I notice that the CRjavaHelper.java declares this addDiscreteParameterValue as accepting an Object type for the newValue.
Any ideas???

Hi,
nevermind.
case sensitivty strikes again.
my URL param was P1 ( case sensitive)

What is the parameter list and why does it keep on coming up?

What is the parameter list and why does it keep on coming up when I try to finalize the video or share it?

Hi
I try to finalize the video or share it?
How do You do that and to what do You Share it ?
Yours Bengt W

Need help with parameter fields and report selection.

Hi all:
I hope some one can help me with the problem I am having with my parameter field and record selection.
First, can anyone explain to me why my parameter field CustStart, which is dynamic and is based on the field Customer in the table CustMaster. There are over 1800 records in the CustMaster table but the drop down list only shows maybe about half of them and there is no way to scroll down to the last customer record. What am I doing wrong?
Second, is there any way to base a parameter field on a formula field on my report? On my report I have created a field Cust that is the customer name and number joined together in one field. I would very much llike to use this formula in my record selection and in my parameter field. Can it be done?
All help is greatly appreciated
Thanks,
FatMan

Hi,
You can use the following for changin increasing the LOV.
Crystal Reports XI BusinessObjects Enterprise XI
For performance reasons, in Crystal Reports XI Release 1 and Release 2 the maximum number of values that are returned for a list of values is set to 1000. If you have a cascading List of Values (for example Country > Region > City), the lowest level (in this case City) will only display a maximum of 1000 values. This means that the higher-level prompts may display far fewer values than you expect. The list of values provides the data for the dynamic parameter list.
How can you modify the maximum number of values available in a dynamic parameter list?
Resolution
To increase the maximum number of values available in a dynamic parameter list, you must add a registry key.
CAUTION     The following resolution involves editing the registry. Using the Registry Editor incorrectly can cause serious problems that may require you to reinstall the Microsoft Windows operating system. Use the Registry Editor at your own risk. For information on how to edit the registry key, view the 'Changing Keys and Values' online Help topic in the Registry Editor (Regedit.exe).
It is strongly recommended that you make a backup copy of the registry files (System.dat and User.dat on Win9x computers) before you edit the registry.
Crystal Reports XI Release 1
1.     Create a registry key HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.0\Crystal Reports\DatabaseOptions\LOV.
NOTE     Alternatively, you can create the registry key HKEY_CURRENT_USER\SOFTWARE\Business Objects\Suite 11.0\Crystal Reports\DatabaseOptions\LOV and that key will override the settings of the HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.0\Crystal Reports\DatabaseOptions\LOV key.
2.     Add a string value "MaxRowsetRecords" and set the value to the maximum number of values that you desire for your report. For example, a value of 2000 will return up to 2000 values in the lowest level of a cascading parameter. NOTE: The value 0 (Unlimited) will not work with BusinessObjects Enterprise XI or Crystal Reports Server XI, you must specify another value.
NOTE     The higher the number of values is, the longer it will take the Enter Values dialog box to populate with values.
3.      After making changes to the registry, restart the affected service or application as required.
Crystal Reports XI Release 2
1.     Create a registry key HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Crystal Reports\DatabaseOptions\LOV.
NOTE     Alternatively, you can create the registry key HKEY_CURRENT_USER\SOFTWARE\Business Objects\Suite 11.5\Crystal Reports\DatabaseOptions\LOV and that key will override the settings of the HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Crystal Reports\DatabaseOptions\LOV key.
2.     Add a string value "MaxRowsetRecords" and set the value to the maximum number of values that you desire for your report. For example, a value of 2000 will return up to 2000 values in the lowest level of a cascading parameter.
NOTE     The value 0 (Unlimited) will not work with BusinessObjects Enterprise XI or Crystal Reports Server XI, you must specify another value.
3.     After making changes to the registry, restart the affected service or application as required.
I hope this helps you.
Regards,
Prashant

Customize Parameter Panel and Labels

Can anyone tell me how to customize the labels in the parameter panel and also change the word "Parameter" to "Search"? I am working on an application that will be accessed by users who do not know what parameters are. Any help will be appreciated.

So get your App to capture the parameter stuff (I use a VB.net program) and then use it to populate the parameters.

What is parameter id and default component in data element? Help!

Hi experts,
In the further characteristics, What is parameter id and default component name in data element? what are they used for?
Example: S_CARR_ID.
Thanks
Gopal

Hi,
Parameter ID :- Is used for assigning value to field.
Suppose u call a transaction in u porgram.
and u want to assign some value to field before executing the transaction.
if the field has parameter id u can assign value to field before calling the transaction.
that is it take the default value from the memmory.
and u set value in the memmory using parameter id.
<b>----
GET PARAMETER -
</b>
Basic form 3
GET PARAMETER ID pid FIELD f.
In some cases, the syntax rules that apply to Unicode programs are different than those for non-Unicode programs. See ABAP Unicode - Other Changes
Effect
First, the value stored under the key pid is transferred from the local SAP memory into the field f. If this key is not available in the local SAP memory, the value stored under the same key pid is transferred from the global user-related SAP memory to the field f.
A parameter ID can have up to 20 characters. You can find an overview of the keys (parameters) used in the SAP system description or the appropriate function in the ABAP Workbench.
The Return Code is set as follows:
SY-SUBRC = 0: A value was read from SAP memory. SY-SUBRC = 4: No value was found in SAP memory under the specified key.
Notes
The global user-related SAP memory is available to each user for the entire duration of a terminal session. For this reason, set values are retained when you leave a program.
You should not use SAP memory for temporary storage because a user's parallel sessions use the same global memory.
Example
Read the program name from SAP memory:
DATA : REPID LIKE SY-REPID.
GET PARAMETER ID 'RID' FIELD REPID.
<b>----
SET PARAMETER -
</b>SET PARAMETER ID pid FIELD f.
In some cases, the syntax rules that apply to Unicode programs are different than those for non-Unicode programs. See ABAP Unicode - Other Changes
Effect
Writes the contents of the field f to the global user-specific SAP memory and the local transaction-specific SAP memory under the ID pid. Any existing values under the same ID are overwritten.
Parameter IDs can be up to 20 characters long. They cannot consist entirely of spaces. The SAP system description contains an overview of parameter IDs. You can also produce a list using the ABAP Workbench.
Notes
The global, user-specific SAP memory is available to a user for the duration of a single terminal session. Values written to it are retained even when the user exits a program.
Do not use SAP memory as a temporary storage area, since parallel sessions belonging to the same user all use the same memory area.
Only store data of the types C, N, D, and T, as well as structures that consist of these types, in the SAP Memory.
You can create new parameter IDs using the ABAP Workbench.
Parameter IDs may have a namespace prefix.
Example
DATA REPID like sy-repid VALUE 'RSPFPAR'.
SET PARAMETER ID 'RID' FIELD REPID.
Message was edited by: Manoj Gupta

Query to get parameter name and value after ran the conccurent program

Hi All,
Query to get the parameter name and value for completed concurrent program using the request id. can any one help me in this regard.
Thanks,
Red.

Red,
I have tried the same query and it works properly here.
I have submitted "Purge Signon Audit data" concurrent program with "Audit Date" parameter set to 01-06-2009, and here is the query output:
SQL> select request_id, phase_code, status_code,
argument_text, argument1
from fnd_concurrent_requests
where request_id = '739664';
REQUEST_ID P S ARGUMENT_TEXT ARGUMENT1
739664 C C 2009/06/01 00:00:00 2009/06/01 00:00:00Regards,
Hussein

Difference between After parameter Trigger and befor report Trigger

hi,
Can anyone tell me Functional difference between After parameter Trigger and Before Report Trigger. with some practical example or scenario.
I did try few things but I couldn't make out any difference.
thanks
ram

Probably none at this point.
We pass parameters from a form (and do not use the report param selection screen), but always run code in the afterpform.
put your parameter form code processing in the afterpform. I rarely ever use before report.
The order is as expected:
before pform
param form
after pform
before report
report
--between pages during report run
after report

Host parameter null and convert SOAP to HTTPUrl

Hi,
We are trying to fire a SOAP request and print the response but its throwing this error
Exception in thread "main" java.lang.IllegalArgumentException: host parameter is null
The piece of code is:
HttpClient hc = new HttpClient();
System.out.println("Came here");
int iResultCode = hc.executeMethod(post);
executeMethod(post) is failing but when I print the value of post, its �org.apache.commons.httpclient.methods.PostMethod@fd54d6�
Can anybody throw some light on this error and how to solve it??
Also, there�s another issue.
We are upgrading from Weblogic 7.2 to 9.1
Earlier we were able to pass the request and get the response in HTTPUrl form but now after upgrading, its getting passed in SOAP format. Is there any way to bypass the SOAP and get it in HTTPUrl format or what are the configurations to be made to adapt to the SOAP format?
connection =(HttpURLConnection) url.openConnection();
This line was returning HTTPUrl format, now its coming in SOAP format

your PostMethod takes the Url as the parameter. Check you are using the proper URl i.e like http://host:port/name?params like that

Reports 6.0 and Parameter Lists and Generate to File

I am using the run_product built in from Forms 6.0 and opening
up a report passing it several parameters via a parameter list.
Everything works great when previewing the report.
There is the option in the report preview under File -> Generate
to File. When I generate a report to file using any type of
format it appears that the report does not use the parameters
that I passed in originally from the form. It appears that it
looses all the parameters I passed in. This is most concerning
to me. Am I doing something wrong or is this a "feature" I
didn't know about? I really would like users to have this
ability.
null

Yes I guess this will work, but the option to generate to file
is extremely misleading if you ask me. This option should
generate the current report with the current parameters. This
is unacceptable as far as I am concerned and should be
considered a bug. Oracle needs to give us more control over
FORMS and REPORTS into all too many situations I have been
frustrated because I am not able to do something that I want to
do.
I feel in general REPORTS object is very limited compared to
crystal reports....
Dan Paulsen (guest) wrote:
: Give the user the option on the calling form whether to save
the
: report to file or just view it. If they want to save to file,
: pass the parameter to save to file when you call the report
and
: suppress the parameter form, this will eliminate the problem.
: Spencer Tabbert (guest) wrote:
: : I am using the run_product built in from Forms 6.0 and
opening
: : up a report passing it several parameters via a parameter
: list.
: : Everything works great when previewing the report.
: : There is the option in the report preview under File ->
: Generate
: : to File. When I generate a report to file using any type of
: : format it appears that the report does not use the
parameters
: : that I passed in originally from the form. It appears that
it
: : looses all the parameters I passed in. This is most
: concerning
: : to me. Am I doing something wrong or is this a "feature" I
: : didn't know about? I really would like users to have this
: : ability.
null

Best Practice For Database Parameter ARCH_LAG_TARGET and DBWR CHECKPOINT

Hi,
For best practice - i need to know - what is the recommended or guideline concerning these 2 Databases Parameter.
I found for ARCH_LAG_TARGET, Oracle recommend to setup it to 1800 sec (30min)
Maybe some one can guide me with these 2 parameters...
Cheers

Dear unsolaris,
First of all if you want to track the full and incremental checkpoints, make the LOG_CHECKPOINT_TO_ALERT parameter TRUE. You will see the checkpoint SCN and the completion periods.
Full checkpoint is being triggered when a log switch happens and checkpoint position in the controlfile is written in the datafile headers. For just a really tiny amount of time the database could be consistent eventhough it is open and in read/write mode.
ARCH_LAG_TARGET parameter is disabled and set to 0 by default. Here is the definition for that parameter;
http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams009.htm
If you want to set this parameter up the Oracle recommends it to be 1800 as you have said. This can subject to change from database to database and it is better for you to check it by experiencing it.
Regards.
Ogan

Open_form with parameter list and execute_query

Hello all.
In a 6i form WBPressed trigger creates the parameter list
begin
    v_paramlist_id := create_parameter_list('FRM_PARM_LIST');
    add_parameter('FRM_PARM_LIST', 'P_CUST_NUM', TEXT_PARAMETER,
                   to_char(:CUSTOMER_INFO.CUST_NUM));
    open_form('CUSTOM_SCORING', ACTIVATE, SESSION,
                     NO_SHARE_LIBRARY_DATA, 'FRM_PARM_LIST');
   destroy_parameter_list('FRM_PARM_LIST');
end;Then in the second form, WNFInstance trigger has:
    if :PARAMETER.P_CUST_NUM is not null
     then
     GET_PARAMETER_ATTR('FRM_PARM_LIST', 'P_CUST_NUM', x, v_cust_num);
     set_block_property('CUST_SCORING', DEFAULT_WHERE,
                     'CUST_NUM = to_number('||v_cust_num||')');
     go_item('cust_scoring.cust_num');
     do_key('execute_query');I get FRM-40505 Unable to perform query. It was working, but I broke it along the way. Does this much seem correct to open the second form and query the specific customer?
Upon opening the second form in the Developer tool, it cannot locate a custom Object Library called PARAMETERS. I deleted it & drug it in again from the original (sub-classed). Sould I do the entire library?
Thanks.

Hey - I think I see the problem today.. (fresh set of eyes)
open_form('CUSTOM_SCORING', ACTIVATE, SESSION,
NO_SHARE_LIBRARY_DATA, 'FRM_PARM_LIST');
Change this to
open_form('CUSTOM_SCORING', ACTIVATE, SESSION,
NO_SHARE_LIBRARY_DATA, v_paramlist_id );
Hello all.
In a 6i form WBPressed trigger creates the parameter
list
begin
v_paramlist_id :=
:= create_parameter_list('FRM_PARM_LIST');
add_parameter('FRM_PARM_LIST', 'P_CUST_NUM',
UM', TEXT_PARAMETER,
                   to_char(:CUSTOMER_INFO.CUST_NUM));
open_form('CUSTOM_SCORING', ACTIVATE, SESSION,
ION,
NO_SHARE_LIBRARY_DATA,
O_SHARE_LIBRARY_DATA, 'FRM_PARM_LIST');
destroy_parameter_list('FRM_PARM_LIST');
end;Then in the second form, WNFInstance trigger has:
if :PARAMETER.P_CUST_NUM is not null
     then
GET_PARAMETER_ATTR('FRM_PARM_LIST', 'P_CUST_NUM', x,
, v_cust_num);
     set_block_property('CUST_SCORING', DEFAULT_WHERE,
                     'CUST_NUM = to_number('||v_cust_num||')');
     go_item('cust_scoring.cust_num');
     do_key('execute_query');I get FRM-40505 Unable to perform query. It was
working, but I broke it along the way. Does this
much seem correct to open the second form and query
the specific customer?
Upon opening the second form in the Developer tool,
it cannot locate a custom Object Library called
PARAMETERS. I deleted it & drug it in again from the
original (sub-classed). Sould I do the entire
library?
Thanks.

Parameter CPU_PER_SESSION and CPU_PER_CALL

Similar Messages

Maybe you are looking for