Parameter Transaction Code for Function Group based Tcodes

Hi,
I have created a function group for a single screen 1000 having only 2 screen fields with input/output enabled, one of them being a flag field. Have also created a Transaction code to point to the screen 1000.
My requirement is to create another Tcode(Parameter Transaction Code) with the previous created Tcode and pass default values to the screens flag element. I have entered the below :
Name of the screen field
Value
FLAG
X
Still i am not able to get the value of FLAG as X when i debug the program. I am confused what mistake have i done. It will be helpful if someone can guide on this. I know its simple and i believe me i have tried all possible ways to check my mistake. Couldn't find any.
Thanks and Regards,
Vadid Valiulla

Yes, Basically i am calling TCODE1 from TCODE2.
I am using the same Function Group and yes a global variable is defined for the screen fields.
I actually do not want to go by the Parameter ID method. But still i can use it if that is easier. Currently there is no Parameter ID for the screen field as i wanted the Tcode2 also to be called independently.
Thanks for your time Prakash
Regards,
Vadid

Similar Messages

Code regeneration for function group MGAD

Hi,
I have added new fields into table MARA and structure BMMH1, after that using RMDATING i have generated code for function group MGAD...
now, i want to remove those newly added fields from MARA and BMMH1, deletion happend...but, still the code generated in function group MGAD is present...please let me know how to delete this code.
Regards,
Ram.

Hello,
Take a look at the following SAP Note :
Note 120104 - Deleting fields from structure CI_MMH1
I know the version of the SAP Note is probably obsolete but read the manual actions carefully.
We had the same error and used these SAP Note corrections in an ECC 6.0 system with success.
Succes.
Wim

How to create a transaction code for a function group with screen 100 as st

Hello ,
I have requirement where I need to create a function group and create screen 100, 200, 300 and include the function in the screens.
Customer asked me to create a transaction with the screen 100 as the starting screen.
Can you please let me know how to create a transaction code for a function group with screen 100 as starting screen.
[ It is not a module pool program ].
Thanks
Prashanth.
Moderator message - Please ask a specific question and do not ask the forum to do your work for you - post locked
Edited by: Rob Burbank on Jun 2, 2009 11:49 AM

Go to transaction SE93, enter a transaction code that you want and click on "create". Enter a text and select the "Transaction with Parameters" button. In the Default Values section, enter START_REPORT in the transaction field. Check the "skip initial screen" box. In the Name of Screen field section enter the following lines:
Name of screen field:                               Value
D_SREPOVARI-REPORTTYPE                RW
D_SREPOVARI-REPORT                        ZPCA
Save and transport accordingly.

How to create Transaction code for Table Maintanance generator.?

Hi,
I have created a Z Table. and I maintained the Table maintenance generator for the same. Now, my requirement is.. I have to create Transaction code for maintain and Display of this Z table.
Can someone help me how to create the transaction code for Maintain and Display of the table. I know that we have to create a Transaction code for 'SM30'. Can someone tell me the steps to do the same. When I goto SE93 and say CREATE transaction, I get 5 options, Which one to select and what are the details should I provide in the subsequent screens.
Thanks in advance.
Best Regards,
Paddu,

Hi,
     Check the below steps......
1. Go to Tcode u2018se93u2019.
2. Select ' Transaction with parameters'.
3. Then Transaction 'SM30' with click on skip initial screen
      VIEWNAME : XXX9tABLE NAME)
      UPDATE   : X
4. Maintain the Table maintenance generator
Authorization group : &NC&
Authorization object :
Function group : name(xxx)
Maintenance Screens :
Maintenance type : One step
Maint Screen No : Overview screen (2)
If still u have problem I will send u steps with Screen shot ...send me Yr id.
Regards,
Biswanath

How to Create Transaction code for a Report

Hi Gurus,
I created some reports and I wants those reports
should be placed in the SAP Menu(initial screen) not
in the User menu in the form of Transaction codes.
I would really appreciate if any one can please send the process to create transaction codes for the User reports/Report groups in R/3 and how to add those created Transaction codes to the SAP MENU.
Thanks in Advance
Danial

Try to insert it into the main menu if you must change S000 (there is a function module for everything)? Perhaps SAP protects their menu trees from foreign subnodes in SE43?
Also note that for report transactions you do not need to give the user transaction code start_report. If you do, then they could enter it directly and potentially start many other reports too. The system will call start_report for submitting the report internally without authorizations for it required (unless start_report is maintained in SE97).
Regarding DE, this also confuses me sometimes and I noticed that it generally indicates that I am doing something which has an implication for a SAP standard object. Try either hitting the enter button to see what the next screen is, or, choose original language in the previous screen, or, logon in sy-langu = DE and (remember the path if you dont speak German) change it, or, follow JCs advice to create your own menu.

How to create transaction code for a Z-table

How to create transaction code for a Z-table?
Se93 --> then which radio button to be selected? and what is the program nam e to be given

Hi Sam,
Procedure to create a TCODE for ZTABLE:
Create a table maintainance/View for the Z* Table.
Once you create the view goto SE93>Select Parameter transaction and give the short desc.>
Give the transaction as SM30(Skip the first screen-optional)>Check all check boxes under GUI support>In the default values(grid)section first row give the VIEWNAME as you created initially and the second row UPDATE as X.
Se93 --> then which radio button to be selected
Select the parameter transaction as a radio button.
what is the program nam e to be given
no need to give any program name. Instead you have to give the transaction code name as SM30.
Pls mark the helpful answers.
Thanks
Eswar

How to create transaction code for maintenance view

hai friends,
i hope every thing goes good.
i have doubt, how to create transaction code for maintenance view. I created view for tranperant table and now i want to create transaction code for the view.
i tried and i donot know the screen number and program name and where can i give the view name.
if any one know please post in details.
thanks in advance.

Hi Elam,
You need to create a "Parameter Transaction".
What this means is that you will have a transaction (let's call it "ZMAINT") which calls "SM30" and passes in your table name.
Go to transaction SE93 and enter your new transaction code. Enter in the Tcode description and choose "Transaction with Parameters" (it shouldbe the last radio button).
Enter in the default transaction "SM30" and tick the "Skip Initial Screen" check box. Hit Enter.
Now scroll to the bottom of the screen and you will see a Table Control where you will need to enter in the values to the SM30 selection screen.
Because you hit ENTER, the program will have loaded in the Selection Screen parameters into it's memory. Hit the drop down for "Name of Screen Field" and select "VIEWNAME" and then enter in your Z Table in the "Value" column.
Now go to the next line and hit the drop down and select "UPDATE" in the "Name of Screen Field". Enter in a "X" in the value column.
Now save the transaction and there you have it.
Hope this helps.
Cheers,
Pat.
PS. Kindly assign Reward Points to the posts you find helpful.

Transaction code for Table Maitainence for table

Hi all,
i have created Table Maintainece for Table and also i need to create transaction code
for table maintainence.
there when i create transaction code with TRANSACTION with PARAMETERS and SKIP FIRST SCREEN.
I can see all the records in the table into table Maintainence.
Is ther is any possibility like i can restrict records on the key fields (like selection screen).
Will anybody let me know how to goahead with this requirement.
Regards,
Madhavi

You can build a small report that call the maintenance view. In the report, convert the SELECT-OPTIONS input to the [DBA_SELLIST|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=dba_sellist&adv=false&sortby=cm_rnd_rankvalue] parameter of function module [VIEW_MAINTENANCE_CALL|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=view_maintenance_call&adv=false&sortby=cm_rnd_rankvalue].
If you have "pertinent" key to filter the data, you may define these as sub-key in a mainetance view, those fields will be asked for when entering the maintanance dialog. Or you can build a [view cluster|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=se55&adv=false&sortby=cm_rnd_rankvalue] using these sub-set keys.
Regards

Transaction code for Custom report

Hi,
How to create transaction code for Custom report ?
the custom report is a drilldown report of COPA, which can seen in tcode FDI3.
then how to add this new transaction to the menu path Easy assess->FI->AR->Information system->Reports->customers:items.
Thanks,
Swetha

Hi Swetha,
There is a special way to assign tcodes to such reports. Normally you create the report via report painter/writer. These reports are part of library and report group.
Create the tcode in SE93. Then at the bottom of the screen you would find option to specify report group, report name, variant to lauch with. Don't have system to specify the exact way of specifying, if you need I can provide on monday. You can take some existing COPA standard report and check from SE93.
--Ram

Transaction code for SAP query reports

Hi All,
I am trying to create transaction code for sap query report but couldn't go further.
1) Created User group in SQ03
2) Created infoset in SQ03 and assigned that to the user group
3) Created query in SQ01 using the infoset.
I executed the report in SQ01 and it is working fine.
Now I try to create a transaction code in SE93 using the steps mentioned in the following link:
Assign transaction code to SAP Query (created via SQ01)
But when try to execute the report using the transaction code, it is giving error message 'User group xxxxxx is not yet created'
Could any one advice me if I miss something? Or please help me to create this transaction code and transport to production?
Thanks in advance

HI,
based on the thread you've already mentioned:
In SE93, Create a Paramter Transaction
-> Transaction = Start_report
-> In default values, give the below details:
D_SREPOVARI-REPORTTYPE = AQ
D_SREPOVARI-EXTDREPORT = Name of the Query
D_SREPOVARI-REPORT = User Group
So check if the user group is typed correct in SE93 and check also if the user group exits in the system where you are trying to run the transaction.
best regards, Christian

Is there any transaction code for uploding logo in ALV reports.

is there any transaction code for uploding logo in ALV reports.

hi,
call function 'REUSE_ALV_COMMENTARY_WRITE'
       exporting
            it_list_commentary = t_header.
            i_logo             = 'Z_LOGO'.
endform.
Upload Logo for REUSE_ALV_COMMENTARY_WRITE
For those who wish to upload and use a picture in your ALV abap reports.
Steps for uploading Logo :-:
1. Goto the transaction OAER
2. Enter the class name as 'PICTURES'
3. Enter the class type as 'OT'
4. Enter the object key as the name of the logo you wish to give
5. Execute
6. Then in the new screen select Standard doc. types in bottom window
Click on the Screen icon
Now, it will ask for the file path where you have to upload the logo
7. Now you can use this logo in REUSE_ALV_COMMENTARY_WRITE
or
Import Logo and Background Picture for Reporting
In this step, you can import a customer-specific logo and a background picture into the R/3 System. These will be displayed in the header area of reports in HR Funds and Position Management.
From the SPRO:
HR Funds and Position Management --> Dialog Control --> Customize Reporting Interface --> Import Logo and Background Picture for Reporting.
Activities
1. Enter the Name of your logo/background picture as an object key in the initial screen.
2. Make sure that the class name is PICTURES, and the class type is OT.
3. Choose Execute.
4. Double-click the document type Picture on the Create tab page. A dialog box will appear in which you can enter the path in which the logo/background picture can be found.
5. Enter the path and choose Open. The logo will be uploaded into the current R/3 System. If the logo/background picture is to be transported into other systems as well, choose Transport.
6. Return to the initial screen and repeat the procedure after having entered the Name of your background picture as an object key.
Please note that the logo/background picture can only be displayed in ALV-based reports with an HTML header. Manually programmed reports such as business distribution plans are not based on the ALV.
If you have selected several initial objects, ALV-based reports in HR Funds and Position Management will automatically use a hiearchical-sequential display. A logo is not displayed here either. Note also that the logo cannot be printed (see print preview in program).
Make sure that the logo does not exceed a height of 100 pixels because it would mean that the header of the report will be scrollable.

How to create a new request for function group?

Hi Friends,
My client has changed their development server. Now all the objects in old DEV server are transfered to new one. Except for function group objects, we have created new change request number for all others. Now I need to create a new request for function group objects. Can anyone suggest which transaction code I have to use for this purpose?
Thanks,
Kaarthick.V

Hi Karthick,
If you want to Change the request for your FG means,
1. Go to SE80 -> work bench -> Edit object.
Here you have the option two change the request.
or If you want to create the Function Group means,
Go to SE80 -> Select Function Group -> Enter name -> press Enter
Thanks,
Reward If Helpful.

User has no RFC authorization for function group.

Hi expert,
I am calling a new function module from the WebDynpro Java that is causing an issue that User has no RFC authorization for function group. if the user doesnt have proper authorization like SE37 Transactions Code and others.
But there is some more existing function module in the same application that is working fine without having above issues with same access.
I am passing the USERID as input in the function Module and execute simply.
So can you please tell me the Way to handle it?
I will really appreciate your answer.
Thanks
Ali

Hi Rali,
I think,there is problem with ur JCO connection..
Please check the following steps -
1. Go to transaction SM59.
2. Choose Create.
3. Enter the following:
RFC destination: SAPSLDAPI
Connection type: T (Start an external program via TCP/IP).
4. Choose Enter.
5. Choose Technical settings and specify the following data:
a. Select Registered Server Program as the activation type.
b. Enter the program ID of the SAP J2EE Engine that acts as the RFC server. Enter SAPSLD_xyz (xyz is the SID of SAP J2EE Engine Server.)
c. Enter the gateway host and the gateway service of R/3 server
d. If the system is a Unicode system, navigate to Special Options and select the option
Non-Unicode or Unicode in the section Character Width in Target System according to the gateway
server.
6. Save your entries.
Now
1. Go transaction SLDAPICUST.
2. Switch to editing mode and choose Insert Row. Specify the connection parameters of the J2ee server ,
Host name, port Number, user and password - and set this SLD server as Primary.
Only the entry marked as Primary is active.
Please check whether there is entryof r/3 server in the j2ee server /etc/services folder.If no entry is there then add -
R/3server port/TCP
in the service file.
Please check the r/3server service folder and host folder - do they have entry of java server, if no add the entry in the same way as done above for j2ee server.
Also check the Group ,that u have entered for r/3 server in SLD exist in R/3 server or not if not add it....
I hope this will help you ...
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Thanks,
Gunja
Edited by: Armin Reichert on Apr 26, 2008 6:35 PM

Transaction Code for Smartforms...

Hi All,
i have created smartform and now i want to create Transaction code for that..how can i do that, i knew tcode 93 for creating transaction code..but after creating transaction code while executing it is giving error...
Pls help..
Regards,
yunus

Hi,
first u create the driver program.
then call the smart from from that driver program. driver program is simply an exceutable report program.
from that use the FM - > SSF_FUCTION_MODULE_NAME
give the t-code for this report program.
eg: code
DATA: FM_NAME TYPE RS38L_FNAM.
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
* VARIANT = ' '
* DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
*at first give the 'Environment' menu-->'Function Module *Name' in the below code and call 'PATTERN'.
*then Remove that number with FM_NAME
call function FM_NAME
* EXPORTING
* ARCHIVE_INDEX =
* ARCHIVE_INDEX_TAB =
* ARCHIVE_PARAMETERS =
* CONTROL_PARAMETERS =
* MAIL_APPL_OBJ =
* MAIL_RECIPIENT =
* MAIL_SENDER =
* OUTPUT_OPTIONS =
* USER_SETTINGS = 'X'
* IMPORTING
* DOCUMENT_OUTPUT_INFO =
* JOB_OUTPUT_INFO =
* JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
rgds
Anver
pls mark all hlpful answers

What is transaction code for shipping point determination

what is transaction code for shipping point determination in a plant

Shipping point determination happens based on,
1. Shipping condition from customer master
2. Loading group from material master and
3. Delivering plant.
You can define all of them in OVL2.
Thank you
ANil

Parameter Transaction Code for Function Group based Tcodes

Similar Messages

Maybe you are looking for