Parameters from abap web dynpro to visual composer

Hello ,
Can we pass output parameters from abap web dynpro to visual composer?
<i><u>For Example:</u></i>
ID NUMBER that we got in the application (Abap web...)
and we want to pass it to import parameter of visual composer (start-point)
I know about the mapping(in GP) but how we can see the output parameter of the abap web dynpro in GP-callable object(output parameters).
When we use GP (callable object), we have input/output parameters.
I need to map from abap web dynpro <b>(output)</b> to visual composer <b>(input)</b>
Thank You,
Boaz.

Hi Boaz,
Unfortunately it's one of the GP restrictions that it's not possible to transport parameter values from an ABAP web dynpro UI into the GP context. Vice versa is feasible, i.e. you can use an ABAP web dynpro UI and fill it with parameter values from GP context.
Regards,
   Jan

Similar Messages

  • Exiting from ABAP Web Dynpro application

    Hi,
    In ESS portal we have one tab Personal info, there I have created one link and integrated my ABAP web dynpro application.
    I want to exit from the application and go back to the Personal info sub area. created one exit button in my application on press of that i need take this action.
    Please guide me with this
    Thanks!
    Piyush

    Piyush,
    I am not sure whether it works or not just get the navigation url of personalinfo subarea and using portal APIs navigate to that url when you click on exit button
    Thanks
    Bala Duvvuri

  • Get portal user logon details from abap web dynpro

    Hi all,
    I am developing an abap web dynpro which will be added via an iview to our ees/mss portal. What i need to know is how do i get the current user logon details in my web dynpro! i.e. if a user is loged into the portal using personnel number 111111 i need to be able to capture this value so that i can retrieve hr data for this personel number! any information would be much appreciated!
    Regards
    Mart

    Hi Mart,
    You can pass "iv_user=<User.LogonUid>" as application parameter in iview.
    add iv_user parameter in HANDLEDEFAULT method of default window of webdynpro component.
    that's it.
    when u run your webdynpro application, you can have value of portal logged on userid in iv_user.
    hope this will help u a lot.
    [Visit this thread|Re: WD4A: pass portal logged in userID to WebDynpro ABAP IView.]
    -Haresh Khandal

  • Consuming Web Service from ABAP Web Dynpro

    I have written program to consume KM Web Service through ABAP as well as ABAP Dynpro in SAP R/3 by calling Consumer Proxy.
    When I run the program from SE38, it prompts me for user-id & password. If I pass KM Server user-id and password I am able to execute the web service successfully.
    However, while I execute the same code through Web Dyn-pro , it does not ask for user-id and password & terminates with CX_AI_SYSTEM_FAULT : SOAP:1,007 SRT: Unsupported xstream found: ("HTTP Code 401  : Unauthorized")
    I have created a Logical Port in R/3 & I am using this Logical Port while creating an Object of Consumer Proxy.
    Kindly let me know how to resolve this issue.

    The dialog that is produced by HTTP Destination object of the logical port is designed only for use within Classic Dynpro applications.  There is no prompt produced when running in Web Dynpro.  If possible assign a generic user within the logical port definition and this will be used automatically by all users.

  • Change properties of Roles in Abap web dynpro

    Hello Gurus,
    I need to hid or unhide a role based on a condition in my abap web dynpro.
    Can anyone please update me how I can access it from abap web dynpro.
    Is there an API call from abap to set or reset the invisible in navigation area value in portal?
    Regards,
    Dale

    End of days play, this is what I was able to achieve.
    Realised the masthead jsp is the best place to call my abap web dynpro as it is just after the login and at the load of default framework page.
    I was able to call my abap web dynpro and on success, I am calling the homepage role.
    What I have done in the jsp is written an if else statement:
    1) If it is the first call to the jsp call my abap web dynpro in navigation mode 3. This ensures the roles are not visible and the redirection works before the page loads.
    2) Else load the framework page as usual.
    The only issue I have at this point is, I cannot depend on the first visit of the user.
    I need to know in the jsp where the call to jsp is coming from, if it is coming from login page, i will direct the user to WDA else if the call is from my WDA, the normal load should work.
    It would be ideal if my abap web dynpro could write something in the http header which the jsp could read as success. Still close but dont have the solution working yet
    Regards,
    Dale

  • Can the role info be passed from portal to ABAP web dynpro application

    Hi,
    We have some roles in the portal. We call the ABAP web dynpro applications from the portal. Is it possible to pass on the role from the portal to the Web dynpro ABAP application so that we can use this role information in the application.
    Thanks,
    Pooja

    Hi,
    you can try to add the expression
      role=<IView.PCDUnit>
    as part of the Application Parameters in the iView. This will be the role in 99%. However not all iViews started in the Portal must belong to a role. You can start iViews using page navigation that are not part of a role. Therefore the PCD does not talk about roles but about "units" which is the superordinate term.
    the value will be the PCD path of the role - e.g:
      portal_content/myFolder/roles/myRole

  • How to pass field symbol or table from one view to another view in abap web dynpro?

    I am creating an Inbound Outbound ALV report in ABAP Web Dynpro. However at selection-screen I have select options and fetching is done at view2. Problem is we can pass parameter using inbound outbound parameters but how to pass internal table or field-symbols from one view to another view? I made use of Assistance Class too but its not very clear to me. Please give me some example or code to sort this problem out.

    I am creating an Inbound Outbound ALV report in ABAP Web Dynpro. However at selection-screen I have select options and fetching is done at view2. Problem is we can pass parameter using inbound outbound parameters but how to pass internal table or field-symbols from one view to another view? I made use of Assistance Class too but its not very clear to me. Please give me some example or code to sort this problem out.

  • Launch ABAP Web Dynpro from UWL

    I have developed an ABAP Web Dynpro application. The application needs to be launched from the UWL. This is not working. I get the message 404 Not found The requested resource does not exist. I think the problem is with the WebDynproNamespace setting in the UWL config file but i am not sure. Anyone have any ideas? Full points to the working answer
    Application Properties (SE80):
    Description     DJ: Link AR Invoice to AP Invoice                                      
    Component       ZDJLINKINV                                                             
    Interface View  MAIN_WINDOW                                                            
    Plug Name       DEFAULT                                                                
    Help Menu Text                                                                         
    Help Link                                                                               
    Show Message Component on Demand                                                      
    Always Display Message Component                                                                               
    Package         ZSAPPHIRE_SUB_01                                                      
    Language        EN                                                                    
    URL             http://<removed for security reasons>/sap/bc/webdynpro/sap/zdjlinkinv
    Transaction SWFVISU:
    (task visualization)
    TS90100177 ABAP Web Dynpro
       (visualization parameters)
       APPLICATION  ZDJLINKINV
       DYNPARAM     WI_ID=$(item.externalid)
       NAMESPACE   SAP
    UWL Configuration:
    <ItemType name="uwl.task.webflow.TS90100177.FISystem" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchWebDynPro" executionMode="default">
          <ItemTypeCriteria systemId="FISystem" externalType="TS90100177" connector="WebFlowConnector"/>
          <Actions>
            <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproABAPLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
              <Properties>
                <Property name="WebDynproApplication" value="ZDJLINKINV"/>
                <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
                <Property name="DynamicParameter" value="WI_ID=$(item.externalid)"/>
                <Property name="openInNewWindow" value="yes"/>
                <Property name="WebDynproNamespace" value="SAP"/>
                <Property name="display_order_priority" value="5"/>
              </Properties>
              <Descriptions default=""/>
            </Action>
          </Actions>
        </ItemType>

    Check out the below links:
    1) [UWL work item not launching |http://www.surfingincognito.com/index.php?q=aHR0cHM6Ly9mb3J1bXMuc2RuLnNhcC5jb20vdGhyZWFkLmpzcGE%2FdGhyZWFkSUQ9MTYxMzA2OA%3D%3D]
    2) [Calling Web Dynpro ABAP application as work item|Calling Web Dynpro ABAP application as work item through workflow.;
    3) [Integrating WebDynpro ABAP applications with UWL for workflow in Portal|http://wiki.sdn.sap.com/wiki/display/WDABAP/IntegratingWebDynproABAPapplicationswithUWLforworkflowin+Portal]
    Hope it helps you..

  • How to send Variable from a web dynpro abap application to anthor

    HI all:
        I have two web dynpro abap applications .
        I want to send a Variable from a web dynpro abap application to another  web dynpro abap application  using post method.
        Because, now I have used append_field_url  to send Variable,but this method will display the Variable in the URL.
        I do not need this result.
        I need the Variable from a web dynpro abap application to another  web dynpro abap application  and the Variable will not display in the URL.
        Can you give me an example?
        Thanks.

    HI Nawal Kishor Mittal :
    I have tried your method,but I can not get the value of variable.
    My code is as follows:
    The first web dynpro abap application:
    DATA:BEGIN OF l_send,
         l_value TYPE string,
         END OF l_send.
    l_send-l_value = '400001'.
    EXPORT l_send-l_value FROM l_send TO SHARED MEMORY indx(aa) ID 'YTEST_MATNR'.
    The second web dynpro abap application:
    DATA:BEGIN OF m_send,
         s_value TYPE string,
         END OF m_send.
    IMPORT m_send-s_value TO m_send FROM SHARED BUFFER indx(aa) ID 'YTEST_MATNR'.
    DELETE FROM MEMORY  ID 'YTEST_MATNR'.
    Thanks.

  • Access Portal Parameter from within ABAP-Web Dynpro

    Hi all,
    I have an ABAP Web Dynpro which is executed via an Web Dynpro iView in Enterprise Portal.
    How can I read the UserID of the portal user within the web dynpro? (the portal user will not be the user who called the Web Dynpro)
    Any suggestions on this?
    Thanks in advance.
    Kind Regards,
    Martina
    ~~~~~~~~~~~~~~~~
    ABAP Web Dynpro developed within CRM 5.0 system
    Enterprise Portal 6.0

    Hi Diz,
    I tried doing the same thing by following the steps as mentioned by you. Just to re iterate,
    1. Created a DC "Portal Application Standalone" project by the name myservice.
    2. Created a portal service inside myservice by the ame AmitsService.
    3. Exposed IAmitsService.class in the public part.
    4 Build and deployed the DC on server and tested it through an abstract portal component and it worked FINE !!
    Now..
    5. Created anoter DC of type WebDynPro
    6. Added SAP_JTECHS -> epbc.prtapi._api as a "Used DC" with dependency build time and runtime
    7. Specified the sharing reference in the properties as PORTAL:sap.com/myservice
    8. Tried to reference the service using the following code..
    IAmitsService portalservice=(IAmitsService)WDPortalUtils.getServiceReference(IAmitsService.KEY);
    9.Build and deployed the DC.
    10. When I run the application I am getting the following error
    Processing HTTP request to servlet [dispatcher] finished with error.
    The error is: com.sap.engine.frame.core.load.SAPNoClassDefFoundError: com/sapportals/portal/prt/service/IService
    Exception id: [000D6008418B005C0000002C00000D200004163CE6719E1D]
    PLEASE ADVISE

  • IView not found error when excuting ABAP Web Dynpro iView

    Hi Experts,
    I have created one ABAP Web Dynpro iView for an existing Application.
    Parameters I have passed for iView creation.
    Namespace : sap
    Application Name: SampleApp
    System Name: R3_SYS.
    Can any one please pass on me the details what are the mandatory parameters need to be passed.
    Thanks in Advance,
    Chinna.

    Hi Chinna,
    You need to check the following parameters like
    Namespace - should be 'sap' as this is root node in SICF
    Application Name: - check name of WD application in se80
    Please refer to below thread for creating WD ABAP iview.
    Re: Webdynpro ABAP iView Blank Page
    Web Dynpro for ABAP iVIew's Namespace parameter
    how to create iview from webdynpro application  abap
    Hope it helps
    Regards
    Arun

  • How to execute a BI query/view from a web dynpro application?

    Hi all,
    I am trying to connect to a BI system from a Web Dynpro application. I have to execute a view/query and process the output in my application. Please guide me about how to establish the connection to the BI system from my web dynpro application and then execute the query/view.
    I have tried executing/modelling the BI query/view using Visual Composer but I get an error saying 'QueryView Instantiation failed' when I try to drag the view/query on to the design board.
    Please guide me and help me achieve this.
    Thanks & Regards,
    Kishan

    Hi Kishan,
    Define system for BI in portal and define JCo destination, then from WDJ application use can query BI.
    Create the Technical System and connect with JCO Destinations
    or
    Connecting through the BI Connecters (ex: XMLA Connecter)
    Refer below link:-
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60f35908-ecd4-2910-6c89-e75e1054d9d1?quicklink=index&overridelayout=true
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/60f35908-ecd4-2910-6c89-e75e1054d9d1
    In this document you will get details related to connector and other admin activity.
    Hope this may help you.
    Deepak!!!

  • ABAP Web Dynpro - OfficeControl - Word Integration

    Hi,
    i have a problem concerning the office control of the abap web dynpro.
    I have a textedit box on the view of a web dynpro. Now i want to transfer the data from the textedit box to the word document. I used the "IOS_TEST_WORDPROCESSING" as an example.
    Everything works fine, if there is only one line of text in the textedit box. If i put for example three lines in it, word opens and now i have the choice for a data seperator.
    The word document contains only one field as a "MergeField" like the field of the word document used in the "IOS_TEST_WORDPROCESSING". 
    Could anyone give me a hint how to solve the problem.
    With best regards
    Markus

    I have the same problem. I want to integrate an ABAP Web Dynpro in GP, but there is no way to implement an Interface from GP like it is in JAVA. That means you cannot maintain input , output parameters and give a status back to GP. Seems that in ABAP the WD is not integrated in GP.
    I went to the relevant developement departement an they gave me the following answer.
    In GP you can maintain input parameters for a ABAP Web Dynpro Application manually which will be displayed in the apllication UI URL . Then you need a function module to map the input parameters inside the url to the ABAP Web Dynpro context. Output parameters are not possible in GP with ABAP Web Dynpro. It is also not possible to give back the processing state to GP from your ABAP web Dynpro Application like it is in JAVA. Only the GP framework provides a button to complete this Step manually by the user.
    Regards
    Rainer

  • ABAP Web Dynpro Guided Procedures integration

    Hello,
      does anyone know if there is a way for an ABAP Web Dynpro to expose input and output parameters for use in Guided Procedures?
      Thanks in advance
        Gabor

    I have the same problem. I want to integrate an ABAP Web Dynpro in GP, but there is no way to implement an Interface from GP like it is in JAVA. That means you cannot maintain input , output parameters and give a status back to GP. Seems that in ABAP the WD is not integrated in GP.
    I went to the relevant developement departement an they gave me the following answer.
    In GP you can maintain input parameters for a ABAP Web Dynpro Application manually which will be displayed in the apllication UI URL . Then you need a function module to map the input parameters inside the url to the ABAP Web Dynpro context. Output parameters are not possible in GP with ABAP Web Dynpro. It is also not possible to give back the processing state to GP from your ABAP web Dynpro Application like it is in JAVA. Only the GP framework provides a button to complete this Step manually by the user.
    Regards
    Rainer

  • Create Logical Link to ABAP Web Dynpro

    Hello,
    Within my Direct Link Group, I would like to create a Logical Link to a custom ABAP Web Dynpro.
    Is this possible?  If so, does anyone know how I can accomplish this?
    Thanks,
    Matt

    Hi Matt,
          Please follow the following steps.
    1. find out the URL for the launching BSP Webdynpro application
    2. create a URL in the spro.
    SPRO->CRM->UI framework->Technical Role Definition->Transaction launcher->Define URLs and parameters
    create a new entry and give the following entries.
    a) give the url id
    b)request method -> GET ( select from Drop down )
    c)  click on the 'Non-BSP' URL
    click the checkbox 'Determine Host/Port'  ( it will determine automatically clent and system when launch )
    Mapped LogSys - 'OWNLOGSYS'
    URL = 'sap/bc/webdynpro/sap/XXXXXX'    XXXXXX = ur webdynpro application name
    save the URL.
    3. Create a Transaction launcher and give the above created URL id in step 'Further Technical Details'
    select Transaction Type as 'URL Transaction' and enter the ID.
    4. Create a logical link and assign the transaction launcher id to it.
    5. assign the logical link to direct logical link.
    6. assign direct link to nav bar profile
    7. assign nav bar profile to Business role
    Hope this helps.
    Regards,
    Sandeep

Maybe you are looking for