Parameters not available for run MAKT

Our system produced the above error message when running Dunning batch programs.
The program was cancelled (terminated) after this message.
Program is RFKK_MASS_ACT_SINGLE_JOB
How do ensure that all the dunning parameters are OK in Transaction Code FPVA?
Or is this problem related to user not authorize?
Thank you dear generous SAP experts.
S Bandtas

Can you please clarify this statement? What exactly do I need to do to run msi as Admin?
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

Similar Messages

Crystal report parameters not available when running from within SAP B1

Hi
I have found this problem a few times already and I think it is now about time I find a solution for it.
On my latest Crystal report, I have 2 parameters.
The 1e is a dynamic parameter, allowing the user to select multiple groups.
The 2nd is also a dynamic parameter, allowing the user to select only a single item.
These parameters works fine in Crystal and do what they are supposed to do.
After publishing the report in SAP Busines One (SBO) and viewing it from within SBO, the 2 parameter prompts are still there but without the dynamic list to select any data from.
On a previous report where a parameter has been defined as "Any value can be entered for the parameter" once again worked fine in crystal but from within SBO the parameter allowed no value to be entered.
Have anyone got a solution for this.
Regards
Burger

Sorry guys
You have lost me. I have searched the form and I have worked through the whole pdf you suggested.
I have no idea what I am supposed to do or see or use "ItemGroup@ SELECT ItmsGrpCod, ItmsGrpNam FROM OITB ORDER BY ItmsGrpCod"
As a test I created a test report with the following parameters to test how it would present itself in B1
1.     A static parameter with no list. Allow custom Values = True, Allow Multiple Values = True u2013 B1 result. A box that I could enter anything. Defeating the object as I wanted a list of valid options
2.     A static parameter with no list. Allow custom Values = True, Allow Multiple Values = False u2013 B1 result. A box that I could enter anything. Defeating the object as I wanted a list of valid options
3.     A static parameter with a list. Allow custom Values = True, Allow Multiple Values = True u2013 B1 result. A box that I could select multiple values from a list. I could not add my own value. Defeating the object as the list is static
4.     A static parameter with a list. Allow custom Values = True, Allow Multiple Values = False u2013 B1 result. A drop down box where I could select one of the values. Defeating the object as the list is static
5.     A static parameter with a list. Allow custom Values = False, Allow Multiple Values = False u2013 B1 result. Same as in point 4
6.     A Dynamic parameter. Allow custom Values = True, Allow Multiple Values = False u2013 B1 result. Same as in point 1 & 2. No Dynamic list returned and can not add own option
As mentioned. All the parameters work in Crystal as one expect it to. What I am after is what should I change in B1 so that the report works the same as in Crystal.
Where in B1 should it be changes and to what should it be changed.
If the changes should be done in crystal to cater for B1 then what should be changes where to what
I am not that familiar with B1.
In my test report I use B1 table OITM.
My parameter is Item (Crystal syntax {?Item}) and I use it in a filter to say {OITM.ItemCode} = {?Item}
Regards
Burger

HT4972 software update help for 1st gen iPad, currently running 5.1.1 - is iOS6 not available for the first generation iPad?

my first gen ipad says that there isn't a software update, currently running 5.1.1 - is iOS6 not available for the first generation iPad

That's right. The iPad 1 maxes out at 5.1.1

Valid size not available for this creation when using Greeting Card feature

Using PSE9 with a Mac. When attempting to create a greeting card, after selecting the photo, the Greeting Card, I receive a pop up error message as follows:
"Valid Size Not Available For This Creation". (All other Create functions such as Photo Book, Photo Calendar, and Photo Collage appear to be working). I have been in contact with Adobe Support and have been instructed to do a number of things from creating a new preferences file to uninstalling and re-installing the PSE software, with no result. Has anyone else run into this problem, and if so have found a fix? Thanks.

I've been tearing my hair out over this one also. I've been on hold for over 10 hrs with Adobe Support waited over almost 2 weeks and still no resolution. I'm trying to create the Save the Date cards for my wedding and I can't wait for Adobe. Removing the preferences file and uninstalling/reinstalling does not fix the problem.
That said I did figure out a workaround for this. It's easy but it does require Windows. For me this was no big deal as I do own a Windows box.
Get the free trial version of PE9 for Windows and install it. If you don't have a Windows computer get to a friend that has one
Upload some of your photos to the PE9 Windows Organizer (it's identical to the mac version)
Select Create and then Greeting card. Photoshop will launch the guided edit feature for greeting cards.
Select the Layout feature and once you find out that you like save it as Photoshop project. Repeat this step for as many layouts as necessary.
Copy your Photoshop project files (and any folders) to your mac.
Open the project files as you would with any other Photoshop file.
You can now select the Create feature. You will be able add your pictures and resize them, you will be able to add/remove text, you'll be able to change the backgound/borders, add graphics...pretty much anything...EXCEPT automatically modify the layout. If you click on Layout, PE9 returns nothing. You can however go into full edit mode and if you have decent Photoshop skills you can make any changes to the layout manually.
If I had to put money on this I'd say that there is a problem with the PE9 Mac installation package. For some reason it is not deploying the layout data/files or it is not putting them in the right place. For this reason the program can't find the layouts when the user selects the greeting card guided edit.
Good luck.

Macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was cancelled

macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.

I only have 1 apple ID and the same was used to set up this early 2011 macbook pro and iPhoto app. I don't want to loose out on any photos. I tried logging out of app store and back in but no luck. PLEEAASEE HELPP!!!
This problem has been reported by quite a few forum members, who skipped the update to iPhoto 9.5.1 while running Mavericks. In that case try to purchase iPhoto again instead of updating.
After making your backup try the following:
Uninstall iPhoto by deleting it from the applications folder, but do not empty the Trash.
Launch the App Store, click the "Store" menu, and sign in with your AppleID.
Open the main page of the App Store and search for iPhoto.
If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
If it is not showing as free, there is no help but contacting the App Store Support, as Niel pointed out: http://www.apple.com/support/mac/app-store/contact/

IBooks 1.3 on iPod Touch 2G (4.2.1) dictionary not available for this language

I have an iPod Touch 2G, running 4.2.1. I also have iBooks 1.3. Everything is running well, but unfortunately I do not have the built in dictionary for ebooks that I have bought on the iBooks store. I have 14 books from their store, but I am not able to look up definitions of words with the iPod Touch. I also have an iPad 2, but the dictionary works on it (with the same books). Could someone help me with this situation? Or, could someone point me in the right direction. I cannot contact Apple, since my iPod Touch is no longer in warranty. Thank you.

I have the same problem with the same iPod Touch 2G. It keeps saying "Dictionary is not available for this language". Before the update, it was working fine...
Somebody knows how can we go back to an older version of iBooks?

Finder is not available for standard user

Hi,
I recently installed OS X (10.8.2) from app store. We created "Data" folder and created few admin and non admin users. Granted access to both users to same folder. When admin logged off and standard user logged in, he could not find Finder. Repeated this with 8 standard users and Finder is not available for all 8 standard users. For 2 admin users Finder is available.
We did not change any settings whatsoever, so not sure this behavier is by design or I am missing something.
Please help
Thanks in advance.

Are you running OS X 10.8 client or Server (is Server.app installed)? If you are using OS X Server, are these local accounts or network accounts?
What do you mean by "could not find Finder?" As in could not log in? Could not access this 'Data' folder in Finder?

Sql 2008 r2 property size is not available for database

Nightly whenever index rebuild process runs My data file and log file gets full and when right click properties on database then I get the error: Property size is not available for database.This property may not exist for this object.
What is the error means? What is my database state at that time?
Thanks

Nightly whenever index rebuild process runs My data file and log file gets full and when right click properties on database then I get the error: Property size is not available for database.This property may not exist for this object.
What is the error means? What is my database state at that time?
Thanks
Hi Ajay
Firstly, I have seen this before. Even though you have permissions to the database, when there is heavy load (Index rebuilds), I cannot access the database. Usually in this case, I just query the system tables for whatever I need.
Secondly, your transaction log should not be filling up.
What recovery model are you using?
Do you have regular log backups? How often do they run?
You need to plan properly for your transaction log growth.
The data file fills up because the immediate sort of the index rebuild is being done in the database itself. You can change this to run in TempDB, provided your TempDB has been configured properly.
Regards

Why do I get message "back up disc is not available" for Time Machine? It

why do I get message "back up disc is not available" for Time Machine? It's plugged in.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message that corresponds to a failed backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showning, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the text field.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

System profiler "information is not available" for PCI cards

After swapping two cards in their slots, I get the message system profiler "information is not available" for all PCI cards. Mac Pro 4 core 2.66, OS X 4.11 server. The cards are still working. I tried clearing PRAM, etc. Is this a hardware problem or just system profiler being difficult? Is there any way to tell?

That is a bit odd. Maybe try forcing kextd to run can resolve. You might be working off cached info and it is giving System Profiler a hard time. Run this command and then reboot:
sudo touch /System/Library/Extensions
That will update the modify time of the Extensions folder and trick the system into thinking you installed new drivers. This will force an update of the kernel caches when you reboot.
Not sure it this will do it, but best I could think of.
Hope it helps.

'invalid class-java beans not available for import

Hi Experts,
i am using java bean model in my Web Dynpro Application.
for that one i have created command bean(Customer) and in my command bean i am using some other class(CustomerInfo) as reference. this CustomerInfo class contains 4 attribtes(name ,id ,etc all are of type String)
when i try to import these 2 class into web dynpro (using java bean model),for the Customer class it
is giving an error message 'invalid class-java beans not
available for import'.but 2nd class(CustomerInfo) is imported successfully with out giving the error.what might be reason.
any help will be appriciated
Thanks in advance
With Regards
Naidu

Naidu,
Please try to repeat JavaBean model import when running IDE in console mode (correspondign short-cut should be available in Windows Start menu, otherwise just copy original short-cut, edit it and change in command string "javaw" to java).
Post here what is shown on console during import.
VS

Preview not available for this file on import

I just transferred all my stuff from a vista computer to a new Windows 7. Lightroom 3.3 is now running as a 64 bit. I am importing tiff scans which were done on the Vista computer. At first everything was going fine, but now when I select files for import, all I can see are greyed out boxes which say "preview not available for this file". If I import the file, all is well, but I would like to see them in preview as well. Also, the program has crashed twice in the middle of an import.
Thanks for any help!

Yes, the larger preview is viewable. I'm using Vuescan to scan the files. Nothing has changed with the scanning from the previous scans which worked fine...same settings, same computer (not the new one).

HT2499 why does my dvd player all of sudden say "supported disc not available" for dvds i have played in the past

My dvd player has been displaying "support disc not available" for all dvd's that i put in that just weeks ago were playing fine. ive tried cleaning the player and that did nothing...dont know what to do

I'm having the same problem lately. I have a mid 2010 21.5" iMac with an internal SuperDrive running Yosemite. I tried putting in "Dawn of the Planet of the Apes" and "The Giver" rented from RedBox. Both spin sputter for a bit and then eject the disk back out. So, it never mounts and no software (Finder, Disk Utility, DVD Player) ever gets a chance to see it. Both play fine in a 15 year old DVD player, and my purchased copy of "The Dark Knight" mounts just fine in the iMac. So, I have to assume that something is being done to the DVD's that rental companies are given to prevent them from mounting or something.
Not having any luck on Google trying to confirm that.
I guess I need to amend this. Both DVD's play fine in a early 2011 13" Macbook Pro with the internal SuperDrive. It's running Mavericks still and has a "MATSHITA DVD-R UJ-8A8". The iMac has a "OPTIARC DVD RW AD-5680H". Not sure if it's the drive, the OS, or what (although I will say I'm fairly certain I was having this problem on the iMac before Yosemite, so it's probably not the OS).

Refnum Not Available For RT

I am attempting to get a refnum to the Owning VI from an XYGraph
refnum. The catch is that I am running as a standalone exe (in debug
mode) and the refnum that is passed into the property node to obtain
the Owning VI is shown as "Refnum Not Available For RT." The Owning VI
refnum returned is invalid and when I pass it to the FP.Close I get an
error. What can I do to overcome this?
Thanks,Joel

Kyle- you asked to see what was before. Here goes:
I have a "Initialize Graph" VI that I call - that's where I first obtain the reference to the XYGraph.
Then I call a VI to write XY data to the graph. This one works when I'm running as an exe, despite the graph ref showing "Refnum Not Available for RT" when I place a probe on the ref.

Movela netflix queue manager not available for download from blackberry app world

I got a message for an upgrade available for this app, every time I try to run the upgrade it gives me "movela netflix queue manager not available for download from blackberry app world" message. I deleted appworld reinstalled it twice have the same issue. I had this problem before with another app when I deleted the app to reinstall it I had to pay for it again. I already contacted the vendor and they said the issue is with appworld. Is there any solution for this

Hello randykico and welcome to the BlackBerry Support Community Forums.
When you purchase an application in BlackBerry App World, you should be able to delete it and reinstall it without having to repurchase it.
When you reinstall App World to refresh your purchases:
Open BlackBerry App World.
Click the Menu key, and then click
My World
Enter in your BlackBerry ID email and password, then click Login
The application list will refresh automatically
For each application that needs to be reinstalled, select it under the Uninstalled section and click
Reinstall.
Let me know how yo make out
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Parameters not available for run MAKT

Similar Messages

Maybe you are looking for