Parameters tab missing

I am attempting to use an FLVPlayback component, but the
parameters tab is missing from my property inspector in AS3! Is it
possible that I haveI done something to make it disappear, or is
this a sign that I need to re-install Flash (AS3).
Many thanks for your time.

SiHoop,
> I am attempting to use an FLVPlayback component, but the
> parameters tab is missing from my property inspector in
AS3!
Only when your document is configured for ActionScript 3.0?
If so,
that's kind of odd, but my hunch is that you meant CS3. In
any case, you
may have accidentally clicked the X that closes that
tab/panel. To get it
back, use the file menu:
Window > Properties > Parameters.
Write back if that doesn't do it!
David Stiller
Co-author, Foundation Flash CS3 for Designers
http://tinyurl.com/2k29mj
"Luck is the residue of good design."

Similar Messages

Widget Parameters Tab Missing (Certificate.swf) AS2

Hi,
I have hit an unusual problem.
When I insert the AS2 version certificate.swf into a slide, the Widgets Parameter tab does not show up anymore. The result is that I cannot insert the Course name or set the certificate to automatically insert the name of the person onto the certificate, apart from it not showing the scores and grade. The swf file is more like a jpg file, rather than a a widget that automatically inserts data into its boxes.
I don't understand if the AS2 version of the file (certificate.swf) is corrupted. I even tried exporting a new swf from the 'certificate.fla' file but no luck.
Wonder if anyone has come across this before and if so how did you resolve it.
Alternatively, I will be grateful if someone out there is gracious enough to upload a working version of the 'certificate.fla' and 'certificate.swf' file (both AS2 versions) from where I can download the same.
Many Many thanks!
John

Hi there
Perhaps try the following. Create a single slide blank project and try inserting the widget. Do you see the area? If so, it means you have something causing the issue in the other project and you may need to sort of redo the project. Don't let that cause you grief, usually it's pretty straightforward to create a new blank project sized identically, copy paste slides and re-link any links. That's not too bad.
If you don't see a change, it means you have a general Captivate issue. In this case you may wish to try blowing away your Captivate_40.dat file. Close Captivate > Navigate to where the file is found (usually it's in the location below:)
?:\Documents and Settings\??\Application Data\Adobe\Adobe Captivate
? = Your drive letter
?? = Your logged in user name
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Error in Delivery using ME2O : "essential transfer parameters are missing"

Hi All
We have a subcontracting PO for which when trying to create Delivery using ME2O we are getiing error "essential transfer parameters are missing in record 000001". I understand that this error is coming because shpping point is not ap[earing when click on create delivery tab.
Any pointer in this regrd.
Would like to inform that we have already connected the Vendor and Customer in respective master. Apart from that
we have checked that shipping condition, loading group and plant is also set which determines the shipping point.
Would appreciate usefule pointer as this is very urgent.
Rgrds
Yogesh

Hi,
Check following;
OVX6 - Assign sales organization - distribution channel - plant
SPRO > MM > Purchasing > Purchase Order > Set Up Subcontract Order > Here assign Delivery Type "LB" to Plant
SPRO > MM > Purchasing > Purchase Order > Set Up Stock Transport Order > Define Shipping Data for Plants > Here assign the Customer Code of Plant and Sales Area to the Plant
Note: - Customer Code of Plant is to be created in XD01.
Check whether Material Master is extended to the Sales Area.
OVL2 - Cross-check Shipping Point Determination

API gateway/NWadmin/Require parameters tab

I installed the API gateway. When I create the API object and attempt to
configure it, the "required parameters" tab does not appear where I can edit
paths. Am I missing something?

You need the GW5.5 snapins to make that work. Do you have a full set?
On Mon, 10 Sep 2007 18:37:59 GMT, "Jim Alexiou" <[email protected]>
wrote:
>I installed the API gateway. When I create the API object and attempt to
>configure it, the "required parameters" tab does not appear where I can edit
>paths. Am I missing something?
>
Tim
Tim Heywood (SYSOP)
NDS8
Scotland
(God's Country)
www.nds8.co.uk
In theory, practice and theory are the same
In Practice, they are different

Crystal Report: ERROR - Some parameters are missing values

          mine report it possesses a single parameter ....
          this is the example of like tries of to change the value set up in the report...
          ERROR: Some parameters are missing values
          thanks help...
          EXAMPLE:
          <%@ page import="com.crystaldecisions.report.web.viewer.*"%>
          <%@ page import="com.crystaldecisions.report.htmlrender.*"%>
          <%@ page import="com.crystaldecisions.reports.reportengineinterface.*"%>
          <%@ page import="com.crystaldecisions.sdk.occa.report.reportsource.*"%>
          <%@ page import="com.crystaldecisions.sdk.occa.report.data.*"%>
          <%@ page import="com.crystaldecisions.common.keycode.*"%>
          <%@ page import="java.util.*"%>
          <%
          try {
          IReportSourceFactory2 rptSrcFactory = new JPEReportSourceFactory();
          String report = "report/ReportParametro1.rpt";
          IReportSource reportSource = (IReportSource) rptSrcFactory.createReportSource(report,
          request.getLocale());
          Fields fields = new Fields();
          ParameterField pfield1 = new ParameterField();
          Values vals1 = new Values();
          ParameterFieldDiscreteValue pfieldDV1 = new ParameterFieldDiscreteValue();
          pfield1.setName("CICCIA");
          pfieldDV1.setValue("SELECT descrizione, validoDa, validoA FROM tariffari");
          pfieldDV1.setDescription("Query Dinamica....");
          vals1.add(pfieldDV1);
          pfield1.setCurrentValues(vals1);
          fields.add(pfield1);
          CrystalReportViewer viewer = new CrystalReportViewer();
          viewer.setReportSource(reportSource);
          // layout
          viewer.setOwnPage(true);
          viewer.setBestFitPage(true);
          viewer.setHasLogo(false);
          viewer.setHasRefreshButton(true);
          // group navigation
          viewer.setHasToggleGroupTreeButton(false);
          viewer.setDisplayGroupTree(false);
          // page navigation:
          viewer.setHasGotoPageButton(false);
          // print/export
          viewer.setHasExportButton(true);
          //viewer.setPrintMode(CrPrintMode.PDF);
          viewer.setPrintMode(CrPrintMode.ACTIVEX);
          viewer.setIgnoreViewStateOnLoad(true);
          viewer.setParameterFields(fields);
          viewer.setEnableParameterPrompt(false);
          viewer.refresh();
          viewer.processHttpRequest(request, response, getServletConfig().getServletContext(),
          out);
          viewer.dispose();
          }catch(Exception e){
          out.println("Errore " + e.getMessage());
          %>


I am facing the same problem. After selecting an export option (PDF/RTF), the same error message is coming up.
          Also, what needs to be done for displaying export option of EXCEL?
          Thanks,
          Farzal

Download manager and download tab missing in options box.

The download manager and download tab missing in options box when I dropdown tool in menu bar.

The default Firefox Options window doesn't have a separate tab for Downloads, those prefs are on the General tab below Startup.

IDOC in 51 status.Essential transfer parameters are missing in record

Hi All,
Essential transfer parameters are missing in record: 8701 000001
Message no. VL561
I am not understanding what is missing in the IDOC.
Please help me in resolving the issue.
Thanks,
Forum

hi,
Do check whether the below points are mentioned or not...
Outbound delivery
Shipping point
Sales organization
Distribution channel
Division
Material number
Delivery quantity
Ship-to party
Base unit of measure
Inbound Delivery
Base Unit of Measure
Conversion factors for converting base and sales units
Goods Receiving Point
If it is given here in the doc, then check whether these are getting saved into the table or not..
Tables are :
LIKP, LIPS, VTTP...
Hope it helps..
Regards
Priyanka.P

Itunes artwork tab missing for movies in version 11.1.3.8

For some reason recently I am noticing the artwork tab missing when I import in a movie into my itunes directory. This just started happening and the movie formats are exactly the same as ones which have the artwork tab available. These are all MPEG-4 Video Files at 124 kbps. Typical iTunes 'anomoly' but on this one I am baffled. Anyone have a clue as to how to fix this? I even tried completely removing the movie from the itunes file directory and then reimporting into iTunes but same issue.

No need to scream at me.
You can access the apps by clicking the iPad thingy on top right of the screen (when the iPad is connected) and then select Apps and scroll down to file sharing apps...
Or....
As I said....
EXACT SAME WAY AS BEFORE

Default parameters are missing in the cloned EUL

we have discoverer up and running perfectly on our existing instance - SIGMA
now we have a new instance - ALPHA,
we cloned the whole EUL from old instance(SIGMA),
IN ALPHA every thing is working fine, we have all the BA,folders and all the workbooks seem to work fine, but we have a issue with the default parameters.
the default parameters are missing from the workbooks, now this has become an big issue, because we have hundreds of reports and user want need them all with the default parameters
could somebody please help me on this issue
few questions:
when cloned does the default parameters get erased??
Does the default parameters entered in the workbook get saved anywhere in the EUL_Tables??
Could you please give me a best approach to bring in thoese default parameters??
any thoughts are highly appreciated
note: i can edit the worksheet and enter the default parameter and save the worksheet but we have got some hundreds of workbooks

Hi,
when cloned does the default parameters get erased??I would be surprised if the default parameters are erased. More likely is that they are not being used because the default value is not valid anymore or because Discoverer is trying to use the last parameter value. Check the value of the SaveLastUsedParamValue preference setting. Is this the same on Desktop, viewer and Plus?
Does the default parameters entered in the workbook get saved anywhere in the EUL_Tables??The default parameters will be save along with the workbook in the EUL5_DOCUMENTS table. The field is of type LONG RAW so you won't easily be able to see this field. You can use the workbook dump utility to check whether there are default parameters actually set up in the workbook.
Could you please give me a best approach to bring in thoese default parameters??You could try exporting and importing the workbooks into the new environment to see whether this fixes the issue.
Rod West

Crystal Report "some parameters are missing values" while exporting/printin

I am able to pass parameters from a JSP to a crystal report through CrystalReportViewer and view the report. (I tried doing it using the code provided on this help forum. I was getting a message: "Some Parameters are missing values". I had to add 1 line: pfield1.setReportName(""); for every parameter field. And It worked..)
Now I can see the "Print" and "Export" buttons. But when I try to print or export the report, I get the same message "Some Parameters are missing values".

see posting "parameter driven export to excel" on April 26th

CRYSTAL XI SOME PARAMETERS ARE MISSING VALUES

I have a huge problem with parameters in crystal reports XI.
Iam developing using jdeveloper 10g and a jndi connection
I use th following code into my jsp
the report filelds are set correctly and they HAVE values
but after the execution of the following code
i get the following message
ERROR SOME PARAMETERS ARE MISSING VALUES
also I install both commonwinXI_chf and cXIwin_chf fixes from crystal and still nothing .Any solutions to this problem because Iam freaking out
for once more crystal reports XI supports sucks
my code:
IReportSource reportSource= (IReportSource)session.getAttribute("reportSource");
Fields fields=(Fields)session.getAttribute("reportFields");
CrystalReportViewer crViewer=new CrystalReportViewer();
crViewer.setReportSource(reportSource);
crViewer.setParameterFields(fields);
crViewer.setEnableParameterPrompt(false);
crViewer.refresh();
// my fields have values
crViewer.setOwnPage(true);
crViewer.setOwnForm(true);
crViewer.setPrintMode(CrPrintMode.ACTIVEX);
// if i set fields=crViewer.getParameterField then filelds variable is empty!!
try{
crViewer.processHttpRequest(request,response,getServletConfig().getServletContext(),out);
crViewer.dispose();
}catch(ReportSDKException e){
out.println(e);
}

Sorry man sometimes i forget even my self!!
In order to connect crystal with JNDI you have to set the correct parameters
into CRConfig.xml
for example
<JDBCURL>jdbc:oracle:thin:@somewhere:ORA_DB</JDBCURL>
     <JDBCClassName>oracle.jdbc.driver.OracleDriver</JDBCClassName>
     <JDBCUserName>username</JDBCUserName>
     <JNDIURL>t3://somewhere:7001</JNDIURL>
     <JNDIConnectionFactory>weblogic.jndi.WLInitialContextFactory</JNDIConnectionFactory>
     <JNDIInitContext>/</JNDIInitContext>
     <JNDIUserName>weblogic</JNDIUserName>
also
you have to provide the same info into file
CRDB_JavaServer.ini
[CRDB_JDBC]
CacheRowSetSize = 100
JDBCURL =
JNDIURL =t3://somewhere:7001
JDBCUserName = guest
JNDIUserName = weblogic
JNDIConnectionFactory = weblogic.jndi.WLInitialContextFactory
JNDIInitContext = /
I put both files into WEB-INF classes directory
and finaly in both cases you have to include in your project the driver libs
in my case I use weblogic therefore I have included weblogic.jar into my classpath

Some parameters are missing values

I am trying to invoke a crystal report using JRC API. I am using Business Objects XI.
When I try to invoke the report after setting all parameters I am getting an error message "Some parameters are missing values ". Here is how my JSP code looks like
ReportClientDocument oReportClientDocument = new ReportClientDocument();
oReportClientDocument.open(reportName, 0);
CrystalReportViewer oCrystalReportViewer = new CrystalReportViewer();
//set the reportsource property of the viewer
oCrystalReportViewer.setReportSource(reportSource);
//set viewer attributes
oCrystalReportViewer.setOwnPage(true);
oCrystalReportViewer.setOwnForm(true);
//set the CrystalReportViewer print mode
oCrystalReportViewer.setPrintMode(CrPrintMode.ACTIVEX);
//refresh the CrystalReportViewer if necessary (only required once)
if (session.getAttribute("refreshed") == null)
oCrystalReportViewer.refresh();
session.setAttribute("refreshed", "true");
String userid="emagia";
String password="emagia";
String rptuserid="tjordan";
String fromdate="07/01/2008";
String todate="07/12/2008";
ConnectionInfo ci = new ConnectionInfo();
ci.setUserName(userid);
ci.setPassword(password);
ConnectionInfos connections = new ConnectionInfos();
connections.add(ci);
oCrystalReportViewer.setEnableLogonPrompt(false);
oCrystalReportViewer.setDatabaseLogonInfos(connections);
ParameterFieldDiscreteValue val1 = new ParameterFieldDiscreteValue();
val1.setValue(rptuserid);
Values vals1 = new Values();
vals1.add(val1);
ParameterField param1 = new ParameterField();
param1.setName("User Id");
param1.setReportName("");
param1.setCurrentValues(vals1);
Fields fields = new Fields();
fields.add(param1);
ParameterFieldDiscreteValue val2 = new ParameterFieldDiscreteValue();
val2.setValue(fromdate);
Values vals2 = new Values();
vals2.add(val2);
ParameterField param2 = new ParameterField();
param2.setName("Date Range from");
param2.setReportName("");
param2.setCurrentValues(vals2);
fields.add(param2);
ParameterFieldDiscreteValue val3 = new ParameterFieldDiscreteValue();
val3.setValue(todate);
Values vals3 = new Values();
vals3.add(val3);
ParameterField param3 = new ParameterField();
param3.setName("Date Range To");
param3.setReportName("");
param3.setCurrentValues(vals3);
fields.add(param3);
oCrystalReportViewer.setEnableParameterPrompt(false);
oCrystalReportViewer.setParameterFields(fields);
oCrystalReportViewer.processHttpRequest(request, response,getServletConfig().getServletContext(), null);
oCrystalReportViewer.dispose();
In the Tomcat log this is what I get
- JRCAgent3 received request: refreshData
- JRCAgent3 attempting to acquire license
- JRCAgent3 successfully acquired license
- JRCAgent3 releasing license
- JRCAgent3 received request: getPromptConnInfos
- JRCAgent3 received request: compoundRequest
- JRCAgent3 received request: setSQLLogonInfoRequest
- JRCAgent3 received request: setSQLLogonInfoRequest
- JRCAgent3 received request: fetchReportPageRequest
- JRCAgent3 attempting to acquire license
- JRCAgent3 successfully acquired license
- Logon: Connecting to database using local JNDI server ...
- Connection Opened null
- Connection opened (Connection: databaseType=JDBC serverName=reports_dsn.dsn state=open databaseDriverName=crdb_odbc.dll).
- Report parameters is not valid
- Report parameters is changed
- Handling report parameters changes
- Validating report parameters
- com.crystaldecisions.reports.dataengine.l: Some parameters are missing values
- The report requires parameter values that need to be supplied by the client before further processing
com.crystaldecisions.reports.dataengine.l: Some parameters are missing values
     at com.crystaldecisions.reports.dataengine.j.a(Unknown Source)
     at com.crystaldecisions.reports.dataengine.a9.a(Unknown Source)
Can anybody tell me why I am getting this error??
Any help will be appreciated.

The problem may be that you are setting your report date parameters as a string when you pass the value to the report.   If the JRC does not recognize the parameter value as the correct type, it will throw the error you see when trying to pass them to the report.
If they are a date type or a date time type in the report, they must be set as such using the Java Calendar object.
Below is an example of how one would pass a date parameter to a report:
//DATE VALUE PARAMETER.
     Calendar calendar = Calendar.getInstance();
     calendar.clear();
     calendar.set(2004, 1, 17);
     Date dateParamVal = calendar.getTime();
     pfieldDate.setName("dateParam");
     pfieldDVDate.setValue(dateParamVal);
     //Add the parameter field values to the Values collection object.
     vals5.add(pfieldDVDate);
     //Set the current Values collection for each parameter field.
     pfieldDate.setCurrentValues(vals5);
     //Add each parameter field to the Fields collection.
     //The Fields object is now ready to be used with the viewer.
     parameterFields.add(pfieldDate);
     //DATE-TIME VALUE PARAMETER.
     Calendar calendar2 = Calendar.getInstance();
     calendar2.clear();
     calendar2.set(2002, 5, 12, 8, 23, 15);
     Date dateTimeParamVal = calendar2.getTime();
     pfieldDateTime.setName("dateTimeParam");
     pfieldDVDateTime.setValue(dateTimeParamVal);
     //Add the parameter field values to the Values collection object.
     vals6.add(pfieldDVDateTime);
     //Set the current Values collection for each parameter field.
     pfieldDateTime.setCurrentValues(vals6);
     //Add each parameter field to the Fields collection.
     //The Fields object is now ready to be used with the viewer.
     parameterFields.add(pfieldDateTime);
     //TIME VALUE PARAMETER.
     Calendar calendar3 = Calendar.getInstance();
     calendar3.clear();
     calendar3.set(2002, 5, 12, 13, 44, 59);
     Date timeParamVal = calendar3.getTime();
     pfieldTime.setName("timeParam");
     pfieldDVTime.setValue(timeParamVal);
     //Add the parameter field values to the Values collection object.
     vals7.add(pfieldDVTime);
     //Set the current Values collection for each parameter field.
     pfieldTime.setCurrentValues(vals7);
     //Add each parameter field to the Fields collection.
     //The Fields object is now ready to be used with the viewer.
     parameterFields.add(pfieldTime);
Edited by: Merry Enns on Aug 5, 2008 8:11 PM

Boot Image properties...tabs missing

I updated our SCCM system to R2 yesterday...today when I went in to edit a boot image I no longer see the "drivers" tab...it seems like there are other tabs missing as well, just can't remember. Don't know how to add drivers to a boot image
now.
Server 2008 R2
SCCM 2012 R2

This is a common problem. It came up on the forum yesterday as well.
http://social.technet.microsoft.com/Forums/en-US/a42ab116-63f1-431b-a42c-f31f2bdf0896/upgrade-to-sccm-r2-have-to-recreate-boot-image-and-ts?forum=configmanagergeneral
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Essential transfer parameters are missing in record: 000001

I have been trying to create a delivery ( Type LB) trough ME2O and get
this error .
Essential transfer parameters are missing in record: 000001
Message no. VL 561
Diagnosis
Information necessary for this delivery is missing.
System Response
Depending on the category of the delivery being created, the system
needs the following transfer data:
Outbound delivery::::::::
Shipping point
Sales organization
Distribution channel
Division
Material number
Delivery quantity
Ship-to party
Base unit of measure
Inbound Delivery::::::::::::::::::
Base Unit of Measure
Conversion factors for converting base and sales units
Goods Receiving Point
Outbound and inbound deliveries from goods movements::::::
Plant and sales unit transfer data is always mandatory..
Please help me how to fix this issue.
Thanks in advance

hi,
Do check whether the below points are mentioned or not...
Outbound delivery
Shipping point
Sales organization
Distribution channel
Division
Material number
Delivery quantity
Ship-to party
Base unit of measure
Inbound Delivery
Base Unit of Measure
Conversion factors for converting base and sales units
Goods Receiving Point
If it is given here in the doc, then check whether these are getting saved into the table or not..
Tables are :
LIKP, LIPS, VTTP...
Hope it helps..
Regards
Priyanka.P

Ssis data flow item and ssis control flow item tab missing in choose toolbox item from ssdt 2010

ssis data flow item and ssis control flow item tab missing in choose toolbox item from ssdt 2010

I have the same problem.
When i click on tools -> choose tools Items dialog box, Control Flow and Data Flow Tab are missing.
I've just worked with SQL Server Data Tools and SQL Server 2012 and these tabs are not missing.
i think this is a problem installing SQL Server.
I've not yet found a solution.

Parameters tab missing

Similar Messages

Maybe you are looking for