Parsing cell contents

In excel I used the command "text to columns" to parse the contents of a single cell. The result would be to have the cell contents stretched across a series of cells. The separation was user defined based on common delimiters eg. comma, tab, space, etc. Can this function be performed in Numbers?

Hello
Welcome to the club.
I didn't met this kind of function when I looked at the 168 functions available in Numbers.
Some of them have a range of cells as operand but all of them apply to a single cell.
*Go to "Provide Numbers Feedback" in the "Numbers" menu*, describe what you wish.
Then, cross your fingers, and wait at least for iWork'09
Yvan KOENIG (from FRANCE vendredi 11 janvier 2008 20:50:30)

Similar Messages

Cell contents in the condition of SUMIFS

the function SUMIFS(sum-values, test-values, condition, test-values..., condition...) i am not able to use cell contents for the "condition" (=C2) because it says syntax error.
anyone can help on this?
best regards, Paulo

A condition that includes a cell reference would be like this:
"operator"&C2 where you replace the word operator (keeping the quotes) with a less than, greater than or equals symbol or any valid combination of those operators. I would provide examples but the parser for this forum messes up my examples.
The exception is "equals" which does not require the operator, it would simply be C2

Is it possible to use wildcards to match cell contents in an if statement?

I need to return a ID along with some other information on a page by page basis, so that the information comes out linked by position. I use a couple of loops and if statements to navigate through the document. I am able to use exact matches of cell contents which is fine when the contents doesn't vary. But the IDs, though they have a similar pattern, are all different. In a menu driven search, I am able to find what I need with '150^9^9^9^9^9-^9^9^9' But when I try putting this (or any number of [0-9], *, ? combinations) it fails. Is it possible to use wildcards? The symbol used for the match (==) makes me suspect that it is not possible and that only literal, exact matches will work. But I wanted to check with the experts before giving up.
Thanks
pcbaz

Thanks for the input. You're right, a GREP search is much more efficient. But what I'm trying to do and the circumstances here don't allow me, I think, to go that route. I am trying to generate a list of values coming from several textframes on a single page and have them come out so that I can tell which values belong together.
I'm using an inherited document with masters that were created 'manually'; the index numbering for textframes and tables is random. I navigate through the pages, looping through textframe indices asking ' does this textframe exist?' If so, I ask if it is a table -- if no, it is a simple textframe and I ask about the ID, if yes, I ask if the contents of cell (0,0) (invariant position and contents) are equal to the table I want.. I am sending the ID and other pieces of information from the table to one row of a new table on a new page. So the ID and other information from a single page are linked by being in the same row.
I know this a little 'off-normal' -- I'm using the search to navigate through the document and find things by location the way you do with a spreadsheet. I have devised a work-around that helps me get around the fact that the ID is not invariant. I create a list of the (exact) IDs from another document, equating them to a variable ('a'). I then loop through the list of IDs and ask if the contents of the textframe is equal to 'a'..This works o.k, unless there happens to be an extra space, a different kind of hyphen, etc. It would be so much easier if I could use the wildcards that work in a menu-driven text or GREP search in script just to ask about the contents of the textframe.
Thanks again
pcbaz (Peter BIerly)
P.S. we have since rewritten the masters so this problem will not exist in the future -- we now know exactly which textframe and/or table indices to refer to to get any particular bits of information and don't need to ask questions about the contents.

Drag and Drop of cell content between 2 tables

Hi Guys,
Iam into implementing drag and drop of cell contents between 2 different tables,say Table1 and Table2.(Iam not dragging and dropping rows or cells,Just copying the content of one cell to another).
Have extended the java tutorial class "TableTransferHandler" and "StringTransferHandler" under http://java.sun.com/docs/books/tutorial/uiswing/examples/dnd/index.html#ExtendedDndDemo to satisfy my needs.
The drag is enabled for Table1 and table2 as follows.
jTable1.setDragEnabled(true);
jTable1.setTransferHandler(new TableTransferHandler());
jTable2.setDragEnabled(true);
jTable2.setTransferHandler(new TableTransferHandler());
Dont be taken aback with the code I have put.It just to show what I have done..
My questions are put at the end of the post..
//String Transfer Handler class.
public abstract class StringTransferHandler extends TransferHandler {
    protected abstract String exportString(JComponent c);
    protected abstract void importString(JComponent c, String str);
    protected abstract void cleanup(JComponent c, boolean remove);
    protected Transferable createTransferable(JComponent c) {
        return new StringSelection(exportString(c));
    public int getSourceActions(JComponent c) {
        return COPY_OR_MOVE;
    public boolean importData(JComponent c, Transferable t) {
        if (canImport(c, t.getTransferDataFlavors())) {
            try {
                String str = (String)t.getTransferData(DataFlavor.stringFlavor);
                importString(c, str);
                return true;
            } catch (UnsupportedFlavorException ufe) {
            } catch (IOException ioe) {
        return false;
    protected void exportDone(JComponent c, Transferable data, int action) {
        cleanup(c, action == MOVE);
    public boolean canImport(JComponent c, DataFlavor[] flavors) {
          JTable table = (JTable)c;
         int selColIndex = table.getSelectedColumn();
        for (int i = 0; i < flavors.length; i++) {
            if ((DataFlavor.stringFlavor.equals(flavors))&& (selColIndex !=0)) {
return true;
return false;
}//TableTransferHandler classpublic class TableTransferHandler extends StringTransferHandler {
private int[] rows = null;
private int addIndex = -1; //Location where items were added
private int addCount = 0; //Number of items added.
protected String exportString(JComponent c) {
JTable table = (JTable)c;
rows = table.getSelectedRows();
StringBuffer buff = new StringBuffer();
int selRowIndex = table.getSelectedRow();
int selColIndex = table.getSelectedColumn();
String val = table.getValueAt(selRowIndex,selColIndex).toString();
buff.append(val);
return buff.toString();
protected void importString(JComponent c, String str) {
JTable target = (JTable)c;
DefaultTableModel model = (DefaultTableModel)target.getModel();
//int index = target.getSelectedRow();
int row = target.getSelectedRow();
int column = target.getSelectedColumn();
target.setValueAt(str, row, column);
protected void cleanup(JComponent c, boolean remove) {
}Now I want to put in the following functionality into my program...
[1]prevent dragging and dropping text in to the same table.That means I dont want to drag a cell content from Table1 and drop to another cell in Table1. Want to drag and drop cell content only from Table1 to Table2.
[2]Change cursor on a un-defined Target. That means how to prevent a drag from a particular column in Table1.Also how to prevent a drop to a particular column in Table2. How to change the cursor to a "NO-DRAG" cursoror "NO-DROP" cursor.
Could it be done using Drag Source Listener and drop Target Listener?.
If yes,How can these listeners attached to the table and how to do it?
If No,How Could it be done?
[3]Want to change the background colour of the cell being dragged and also the background colour of the target cell where the drop is made...
[4]Is there any out of the box way to make an undo in the target cell(where drop was made) so that the old cell value is brought back.
How can I extend my code to take care of the above said things.
Any help or suggestions is greatly appreciated.....
Edited by: Kohinoor on Jan 17, 2008 10:58 AM

Hi Guys,
Iam into implementing drag and drop of cell contents between 2 different tables,say Table1 and Table2.(Iam not dragging and dropping rows or cells,Just copying the content of one cell to another).
Have extended the java tutorial class "TableTransferHandler" and "StringTransferHandler" under http://java.sun.com/docs/books/tutorial/uiswing/examples/dnd/index.html#ExtendedDndDemo to satisfy my needs.
The drag is enabled for Table1 and table2 as follows.
jTable1.setDragEnabled(true);
jTable1.setTransferHandler(new TableTransferHandler());
jTable2.setDragEnabled(true);
jTable2.setTransferHandler(new TableTransferHandler());
Dont be taken aback with the code I have put.It just to show what I have done..
My questions are put at the end of the post..
//String Transfer Handler class.
public abstract class StringTransferHandler extends TransferHandler {
    protected abstract String exportString(JComponent c);
    protected abstract void importString(JComponent c, String str);
    protected abstract void cleanup(JComponent c, boolean remove);
    protected Transferable createTransferable(JComponent c) {
        return new StringSelection(exportString(c));
    public int getSourceActions(JComponent c) {
        return COPY_OR_MOVE;
    public boolean importData(JComponent c, Transferable t) {
        if (canImport(c, t.getTransferDataFlavors())) {
            try {
                String str = (String)t.getTransferData(DataFlavor.stringFlavor);
                importString(c, str);
                return true;
            } catch (UnsupportedFlavorException ufe) {
            } catch (IOException ioe) {
        return false;
    protected void exportDone(JComponent c, Transferable data, int action) {
        cleanup(c, action == MOVE);
    public boolean canImport(JComponent c, DataFlavor[] flavors) {
          JTable table = (JTable)c;
         int selColIndex = table.getSelectedColumn();
        for (int i = 0; i < flavors.length; i++) {
            if ((DataFlavor.stringFlavor.equals(flavors))&& (selColIndex !=0)) {
return true;
return false;
}//TableTransferHandler classpublic class TableTransferHandler extends StringTransferHandler {
private int[] rows = null;
private int addIndex = -1; //Location where items were added
private int addCount = 0; //Number of items added.
protected String exportString(JComponent c) {
JTable table = (JTable)c;
rows = table.getSelectedRows();
StringBuffer buff = new StringBuffer();
int selRowIndex = table.getSelectedRow();
int selColIndex = table.getSelectedColumn();
String val = table.getValueAt(selRowIndex,selColIndex).toString();
buff.append(val);
return buff.toString();
protected void importString(JComponent c, String str) {
JTable target = (JTable)c;
DefaultTableModel model = (DefaultTableModel)target.getModel();
//int index = target.getSelectedRow();
int row = target.getSelectedRow();
int column = target.getSelectedColumn();
target.setValueAt(str, row, column);
protected void cleanup(JComponent c, boolean remove) {
}Now I want to put in the following functionality into my program...
[1]prevent dragging and dropping text in to the same table.That means I dont want to drag a cell content from Table1 and drop to another cell in Table1. Want to drag and drop cell content only from Table1 to Table2.
[2]Change cursor on a un-defined Target. That means how to prevent a drag from a particular column in Table1.Also how to prevent a drop to a particular column in Table2. How to change the cursor to a "NO-DRAG" cursoror "NO-DROP" cursor.
Could it be done using Drag Source Listener and drop Target Listener?.
If yes,How can these listeners attached to the table and how to do it?
If No,How Could it be done?
[3]Want to change the background colour of the cell being dragged and also the background colour of the target cell where the drop is made...
[4]Is there any out of the box way to make an undo in the target cell(where drop was made) so that the old cell value is brought back.
How can I extend my code to take care of the above said things.
Any help or suggestions is greatly appreciated.....
Edited by: Kohinoor on Jan 17, 2008 10:58 AM

SAP GUI Java 7.10 rev 5: Copy cells content from ALV does not work (OSX)

Hi all,
I'm trying rev 5 for OSX. ALV aesthetics is really great but: copy cells content is not possible anymore.
Nothing happens with command+C.
I cannot copy anymore just a part of the cell content.
Trying all possible key combinations, something is copied with Ctrl+C. When I paste it, the pasted content is something like this:
(0100),RID(),CID(),RIDN(0),E(true),RO(false),CTL(-1) (0000012338),RID(),CID(),RIDN(0),E(true),RO(false),CTL(-1) (),RID(),CID(),RIDN(0),E(true),RO(false),CTL(-1) (),RID(),CID(),RIDN(0),E(true),RO(false),CTL(-1) (),RID(),CID(),RIDN(0),E(true),RO(false),CTL(-1) (),RID(),CID(),RIDN(0),E(true),RO(false),CTL(-1)
where "0000012338" is the content I wanted to copy.
Any suggestion?
Thanks,
Lorenzo

Hello Lorenzo,
thanks for the feedback. We are working on it and if all goes well, a solution will be provided with 7.10 rev 6.
Best regards
Rolf-Martin

Space in table cell content

Hi,
I want to add some space before and after the table cell content. I am using setIntercellSpacing() method to achieve that and I could get the required functionality. But its adding space in the Table Header also which looks odd. Is there any way to set the spacing only for the cell and not for the table header.
Let me know if anyone has solution for this.
Thanks and Regards,
R.Vishnu Varadhan.

I find this behaviour of setIntercellSpacing() very annoying, too. Why the hell did the Swing developers implement it that way?
Nevertheless, you can create the desired effect by writing a custom cell renderer, but that is if course more work than that single method call.

Problem in cell content of alv grid ...

hi all,
     i want to get the cell content of alv grid in the handle method of event data_changed of cl_gui_alv_grid,
i using the following code ...
METHOD on_data_changed.
DATA : lv_value(30) TYPE c.
CALL METHOD ER_DATA_CHANGED->GET_CELL_VALUE
EXPORTING
    I_ROW_ID    = 3
   I_TABIX     =
    I_FIELDNAME = 'cname'                                                                                "" my column table
IMPORTING
    E_VALUE     = lv_value.
MESSAGE lv_value TYPE 'I'.
    ENDMETHOD.
endclass.
but i cant get the value of cell content
Edited by: parashuram on Oct 21, 2011 3:49 PM

Try this way
    method handle_data_changed.
      perform handle_data_changed using er_data_changed.
    endmethod.
form handle_data_changed using p_data_changed type ref to
                               cl_alv_changed_data_protocol.
data: ls_mod_cell type lvc_s_modi,
          lv_value_dni type lvc_value.
loop at p_data_changed->mt_mod_cells into ls_mod_cell.
    call method p_data_changed->get_cell_value
      exporting
        i_row_id    = ls_mod_cell-row_id
        i_fieldname = 'FINI_SUST' <== Your field
      importing
        e_value     = lv_value_dni .
endloop.
endform.

Copy and paste cell content of web form of Hyperion Planning

Our end users encountered performance issues in using the web forms of Hyperion Planning. We have some large web form with 60 columns and 100 rows i.e. around 6000 cells. When end user move around the cell they feel a slow response in the web form especially when copy and paste some cell content from one row to another, or a few cells from one position to other position.
Anyone got similar experience in using web form? Also we understand that Hyperion design will check the cell content of each cell and generate a SQL query to the backend metadata database. It is quite time consuming and waste CPU resource because most of the time our end user will not keep the text information under each cell. We have consulted Oracle team and understand that we cannot disable the cell content checking via SQL query.
Any workaround solution exists to reduce or remove the performance issue in cell content copy and paste?
Thanks!

Hyperion user wrote:
Alp Burak wrote:
Hi,
We had faced the same issue a few years ago. One of our geeks had done a change in either Enterdata.js or Enterdata.jsp which disabled form cell validation. I don't currently have the code with me but it wasn't a big change really, remarking a function could be doing the trick.
I don't think this is officially recommended by Oracle though.
AlpThanks for your advice. We will try to locate the enterdata.jsp and enterdata.js and found out where the SQL being executed.We found out the Enterdata.js under the deployment directory of Weblogic. However it is over 400KB size and many many lines of codes. We think that it is very difficult to locate where should be customized to remove the SQL checking on cell content.
\\Hqsws04\hyperion\deployments\WebLogic9\servers\HyperionPlanning\webapps\HyperionPlanning

Customizing the Cell Content of a Pivot Table

Hi,
I have been away from ADF for a few years (since 10g v 1.3.1) and am quite impressed with all the Faces functionality added to the 11g release. The application I wrote relied heavily on pivot tables which back then, I had to use stored procedures in the database and dynamically views to display information. I am very interested in moving this application to 11g and taking advantage of the PivotTable component. One thing the application does is change the style of cells based upon the object being presented. I have been reading:
Oracle® Fusion Middleware
Web User Interface Developer's Guide for Oracle Application
Development Framework
11g Release 1 (11.1.1)
B31973-03
And am very interested in section 26.8 Customizing the Cell Content of a Pivot Table.
I easily created a pivot table and would like to change the formatting of various cells. I created a backing bean for a test page and added the Example 26–4 Sample Code to Change Style and Text Style in a Pivot Table to the bean.
public CellFormat getDataFormat(DataCellContext cxt)
CellFormat cellFormat = new CellFormat(null, null, null);
QDR qdr = cxt.getQDR();
//Obtain a reference to the product category column.
Object productCateg = qdr.getDimMember("ProductCategory");
//Obtain a reference to the product column.
Object product = qdr.getDimMember("ProductId");
if (productCateg != null && productCateg.toString().equals("Sales Total"))
cellFormat.setTextStyle("font-weight:bold")
cellFormat.setStyle("background-color:#C0C0C0");
else if (product != null && product.toString().equals("Sales Total")
cellFormat.setTextStyle("font-weight:bold");
cellFormat.setStyle("background-color:#C0C0C0");
return cellFormat;
Almost verbatim except changed the literals to select data in my use case domain. My question is: How do I invoke this message from my pivot table? I need to pass it a instance of the DataCellContext. The example is great and illustrates what I am looking to do but does not go into the implementation details required. Is there a sample app available for download that demonstrates these capabilities?
Thanks,
Jeff
Edited by: jcapzz on Jun 9, 2011 3:56 PM

Hello,
I haven't fully understood your question.
Is it: How do I call the getDataFormat() method from my pivot table?
If so , you need to set the dataFormat attribute of your pivot table.
ex: <dvt:pivotTable id="pt2" var="cellData" varStatus="cellStatus"
value="#{bindings.YourView.pivotTableModel}"
headerFormat="#{viewScope.yourBean.getHeaderFormat}"
*dataFormat="#{viewScope.yourBean.getDataFormat}"*
contentDelivery="immediate" pivotEnabled="false"
columnFetchSize="-1" rowFetchSize="-1"
/>
I also put the *headerFormat* attribute which allows to customize the headers
I hope I understood your question ;)
Jack

Adjusting Space between table - cell border and cell content ?

Hi all,
Need a quick help.
I am using a static table. By default, I have some space between the cell content and the text (yes, the cell margins).
I wanted to reduce this space to '0'.
Is there any option to adjust the cell margins? Thanks in advance !!
1 more Q:-
There are no options to merge 2 cells, are there ?
Thanks,
Navin.
Edited by: 890074 on Mar 4, 2012 10:17 PM

Hi Naveen,
Until Documaker 11.5, there are no options to reduce the cell margin and no options to merge cells as well.
Thanks.

Does JMS parse xml content in TextMessages

          Hi
          I am working on WLS 6.1sp2 and I am using jms TextMessage type of message to
          send XML messages from one subsystem to another. I have added an XML registry
          for my version of XML parser. Now I do not have any entries for the entity declarations
          nor for the parser entries in the registry.
          When I send in an XML message in a TextMessage envelope I find the following
          errors in the log.
          <Jun 9, 2003 3:56:57 PM PDT> <Error> <XML> <Failed to parse given XML document.
          Failed to retrieve PUBLIC id. The root element is required in a well-formed docu
          ment.>
          <Jun 9, 2003 3:56:57 PM PDT> <Error> <XML> <Failed to open XML document. Failed
          to retrieve PUBLIC id or SYSTEM id from the document. Decrease the number of cha
          r between the beginning of the document and its root element.>
          <Jun 9, 2003 3:56:57 PM PDT> <Error> <XML> <Failed to parse given XML document.
          Failed to retrieve SYSTEM id. The root element is required in a well-formed docu
          ment.>
          <Jun 9, 2003 3:56:57 PM PDT> <Error> <XML> <Failed to open XML document. Failed
          to retrieve PUBLIC id or SYSTEM id from the document. Decrease the number of cha
          r between the beginning of the document and its root element.>
          <Jun 9, 2003 3:56:57 PM PDT> <Error> <XML> <Failed to parse given XML document.
          Failed to retrieve root tag. The root element is required in a well-formed docum
          ent.>
          <Jun 9, 2003 3:56:57 PM PDT> <Error> <XML> <Could not instantiate factory class
          specified in the Server console. Invalid parameters: at least one of publicId,
          s
          ystemId, rootTag must be non-null>
          [ChangeAwareClassLoader] : Name is : META-INF/services/org.apache.xerces.xni.par
          ser.XMLParserConfiguration
          <Jun 9, 2003 3:56:57 PM PDT> <Error> <XML> <Failed to open XML document. Failed
          to retrieve PUBLIC id or SYSTEM id from the document. Decrease the number of cha
          r between the beginning of the document and its root element.>
          <Jun 9, 2003 3:56:57 PM PDT> <Error> <XML> <Failed to parse given XML document.
          Failed to retrieve PUBLIC id. The root element is required in a well-formed docu
          ment.>
          Now from the logs I understand that the message is being parsed and since the
          parser does not find any PUBLIC ID or SYSTEM id it dumps the error, since I am
          using schemas there is none of the PUBLIC and SYSTEM ids in my xml, also this
          is not logged by any component of my subsystems, this is a weblogic XML Service
          log and when I trace through the code I find that it comes up after the first
          subsystem sends the message and before the second subsystem receives it.
          The question then is does JMS parse XML content in TextMessages and if so how
          can I disable that parsing?
          Thanks
          Sandeep


JMS does not automatically parse TextMessages. Check the XML declaration in
          your application's deployment descriptors. That's often the source of this
          error.
          FYI, you can use XMLMessage for xml payloads. As far as I can remember, the
          XMLMessage is an extension of the TextMessage with xml parsing built in.
          Adarsh
          "Sandeep Nayak" <[email protected]> wrote in message
          news:[email protected]...
          >
          > Hi
          >
          > I am working on WLS 6.1sp2 and I am using jms TextMessage type of message
          to
          > send XML messages from one subsystem to another. I have added an XML
          registry
          > for my version of XML parser. Now I do not have any entries for the entity
          declarations
          > nor for the parser entries in the registry.
          >
          > When I send in an XML message in a TextMessage envelope I find the
          following
          > errors in the log.
          >
          > <Jun 9, 2003 3:56:57 PM PDT> <Error> <XML> <Failed to parse given XML
          document.
          > Failed to retrieve PUBLIC id. The root element is required in a
          well-formed docu
          > ment.>
          > <Jun 9, 2003 3:56:57 PM PDT> <Error> <XML> <Failed to open XML document.
          Failed
          > to retrieve PUBLIC id or SYSTEM id from the document. Decrease the number
          of cha
          > r between the beginning of the document and its root element.>
          > <Jun 9, 2003 3:56:57 PM PDT> <Error> <XML> <Failed to parse given XML
          document.
          > Failed to retrieve SYSTEM id. The root element is required in a
          well-formed docu
          > ment.>
          > <Jun 9, 2003 3:56:57 PM PDT> <Error> <XML> <Failed to open XML document.
          Failed
          > to retrieve PUBLIC id or SYSTEM id from the document. Decrease the number
          of cha
          > r between the beginning of the document and its root element.>
          > <Jun 9, 2003 3:56:57 PM PDT> <Error> <XML> <Failed to parse given XML
          document.
          > Failed to retrieve root tag. The root element is required in a well-formed
          docum
          > ent.>
          > <Jun 9, 2003 3:56:57 PM PDT> <Error> <XML> <Could not instantiate factory
          class
          > specified in the Server console. Invalid parameters: at least one of
          publicId,
          > s
          > ystemId, rootTag must be non-null>
          > [ChangeAwareClassLoader] : Name is :
          META-INF/services/org.apache.xerces.xni.par
          > ser.XMLParserConfiguration
          > <Jun 9, 2003 3:56:57 PM PDT> <Error> <XML> <Failed to open XML document.
          Failed
          > to retrieve PUBLIC id or SYSTEM id from the document. Decrease the number
          of cha
          > r between the beginning of the document and its root element.>
          > <Jun 9, 2003 3:56:57 PM PDT> <Error> <XML> <Failed to parse given XML
          document.
          > Failed to retrieve PUBLIC id. The root element is required in a
          well-formed docu
          > ment.>
          >
          > Now from the logs I understand that the message is being parsed and since
          the
          > parser does not find any PUBLIC ID or SYSTEM id it dumps the error, since
          I am
          > using schemas there is none of the PUBLIC and SYSTEM ids in my xml, also
          this
          > is not logged by any component of my subsystems, this is a weblogic XML
          Service
          > log and when I trace through the code I find that it comes up after the
          first
          > subsystem sends the message and before the second subsystem receives it.
          >
          > The question then is does JMS parse XML content in TextMessages and if so
          how
          > can I disable that parsing?
          >
          > Thanks
          >
          > Sandeep

Copy cell content in OBIEE 11g

I am unable to copy the cell content from OBI dashboard.
Is this OBIEE 11g bug? I am using OBIEE 11.1.1.6.0
Any way to resolve this ??
Thanks in Advance !!

Hi,
This workaround may not be the best but might serve the purpose.
I selected a cell and created a group for the value. Then I selected that group and viewed it's definition. This showed me a single value (which I wanted to copy). I copied the value and pasted to another application.
This worked in analysis as well as on dashboard. I could create a group of more than one cell and copy all the values of that new group to paste to another application.
I then deleted the groups. While using dashboard, I simply clicked 'Back' or 'Return' to remove the groups automatically.
Manoj.

Change the default setting of 'Match entire cell contents' in Excel 2007

Hi,
I am using Excel 2007 on Windows 7 and need to search the contents of cells in a large spreadsheet on a regular basis.
When I open the Find and Replace dialogue box, the Match entire cell contents option is always checked. I deselect this to search for the cell contents I require. If I then enter any values into a cell and try to search for another cell,
the Match entire cell contents option is activated again.
Is there a way to change the default setting for this checkbox to be off rather than on?
Thank you,
Nitin Suneja

Hi Chad,
I will check if it is something localised to the spreadsheet itself as it is shared by a number of people and all are having this problem with this sheet.
Thanks for looking into this for me.
Nitin.

How to extract characters or digits from cell content

Hi,
I'm trying to find out how I can grab a part of a cell content. Example: The cell has the content "1.22.333".
Now, I need to just grab the last part of that (and sometimes also the middle part). I tried to use the FIND and RIGHT function but the problem is that they need the amount of digits which can be different (1.2.3 or 1.22.333).
How can I grab/calculate just the "1" or "22" or "333" from that?
p.

Hi papa,
Here is a workaround, but it involves a word processor such as Pages or Word.
Copy your cells and paste into a blank word processor document.
In Pages, go to:
Menu > Edit > Find > Find...
Click on the Advanced button.
Type a full stop ('period' in AmericanSpeak) in the Find box.
In the Replace box, use the 'Insert' Pop-up menu to insert a Tab.
Replace All.
Copy and paste into blank cells in Numbers:
How can I grab/calculate just the "1" or "22" or "333" from that?
Grab what you want!
Regards,
Ian.

Re-name worksheet tabs from cell contents?

Is is possible to re-name worksheet tabs automatically from cell contents in another sheet within the same workbook?
I have a workbook with 30 sheets all feeding data into sheet 31 - the Master Worksheet where all the data is collated etc.
There are occasions when I'll need to rename the individual sheets, but is there a way to change this in my 'master worksheet' without having to go back and individually re-name all the other sheets?

General,
At this time there is no way to do what you want. If you can formulate a clear feature request you can post your idea to Apple using the menu item "Numbers > Provide Numbers Feedback".
There is a way, however, to use a function called indirect() that can take input from a table to construct a cell reference. Not know your specific setup it is hard to provide a specific suggestion.

Parsing cell contents

Similar Messages

Maybe you are looking for