Part appraisal document for self and subordinates

Hi All
I have created a part appraisal document , for self and sub ordinates. When I logged in to portal , the subordinates are able to view the document whereas document created for self are unable to. For self as well as for subordinates , we have configured the document in ESS only. It may be due to some powl query issue but am unable to identify if its powl issue or some authorization issue,In either case , how to identify the same. Please suggest.
Thanks
Smriti

Hello Smriti,
Can you clarify the issue for me - you have created one appraisal document and in the header data have defined the part appraisers as the employee and subordinates, and only the employee is unable to access the part appraisal document?
When you created the appraisal template, on the 'Roles' tab, is the role for 'Self' ticked?
Can the employee access any of his other appraisal documents from the portal?
Is IT0105 data maintained for the employee's SY-UNAME?
Regards,
Kendall

Similar Messages

Configuration documents for Training and event management &apprisals?

hello xperts
can anyone forward me configuration documents for treaining and event management and apprisal? to [email protected]

Thanks for your suggestions.
i can't go through new appraisal model with catalog & template, because client is not having ESS,MSS. appraisal has to done in the ECC only.
Done the customization like this :
created scales
created appraisal model and assign the scales
for appraisal, Employee can do from APPCREATE transaction rate his own ratings and save.
Now Appraiser (Manager) from APPCHANGE complete the appraisal.
now my requirement is (1) after saving the APPCREATE by the employee, notification has to go to his reporting manager only. (2) Manager can do review/change and complete the process to his Employees only (who are reporting to him)
how can i do this, standard functionality is there or i have to go for ABAP coding ? if ABAP coding what i have to ask them to do.
Please help in this requirement.
Thanks and Best Regards,
Praneeth kumar

I would like to print out the icon and title of each of my apps to another document for printing and sharing within my family

I would like to print out the icon and title of each of my IOS apps to another document for printing and sharing within my family. My son has my old iPod touch so I erased it so he could put whatever games he wants to play on that I used to play with. It is difficult to download every game at one time because there is too much to download at one time. I have many hundreds of apps. One way I found was to create a screen grab of each page in iTunes then open it in Preview contact sheet but that is really tiny unreadable image of each screen. I also tried importing a screen shot of the contact sheet into Paint 2 and magnifying it on several pages but that is really blurry. The ideal solution would be to import the icon and text to another app or to provide a print list of apps solution within iTunes.

Create iPad screen shots by briefly pressing the home and on/off buttons together. You will hear a shutter click sound and find a screen shot on your iPad's Camera Roll. You can then print these screen shots as you would any iPad photos.
UPDATE: I assumed you had an iPad. Hopefully your iOS device does have an on/off and home button and is capable of producing screen shots.

Different segment in same document for leading and non-leading ledger

Hi,
Is it possible to have different segments derived in the same document for Leading and Non-leading ledgers.
Is there an exit where we can substitute the segment originally derived so as to update only in one particular ledger
Please suggest.

Thanks Alex for your response.
But would it be possible to update the segment only in one ledger, the other one carrying the default values coming from profit center?

Help Document for Keyfigures and Characteristics

Hello,
Using BEx Browser I'm generating reports so i need to create help documents for Keyfigues and characteristics that way user will know by looking documentation they will know what is what
How can we create help documentation?
Experts help would be appreciated
Thanks

actually we are using BI7.0 version but we don't have portal and web that is the reason we are using old BEx browser for front end but ETL we are using BI7.0.
so using old BEx browser can we create documentation for keyfigures or not?
if so How?
Thanks

How to take check print out for self and in favour of Bank for DD payment

HI
I have a requirement to take check print out for self and in favour of Bank for DD payment from AP module, how it is possible.
Syam

hi syam,
Step 1: Create a down payment request: F-47
Step 3: Make payment through : F-58
While entering the input parameters, Enter amount: 1050,
For 50 Rs, you take Bank Charges account through GL Fast entry.
Account Entry
Vendor Dr (Spl GL): 1000
Bank Charges Dr 50
SBI Cheque Issue clearing Account Cr 1050
Regards,
Ramakrishna

Max number of part appraiser allowed for a 360d appraisal

Hi, experts,
i am trying to implement a 360 degree appraisal using OSA framework(part appraisal).
according to F1 help:
If you have selected only the Part Appraiser (PAPP) and/or Importance
Part Appraisal (PWGT) columns in an appraisal template, this is a 360°
appraisal, and the SAP system does not restrict the number of part
appraisers allowed.
in my template, only have PAPP column , but the maximun number of part appraisers allowed is still set to 18. what's wrong? it should be no limit.
i tried to create a document(using phap_create_pa) , the 18 limitation stop me to add more part appraiser.
i am so confused, does that mean we can not have a REAL 360 appraisal without limitation for part appraiser?
thanks and best regards.
Jun

hi,
i traced into the program, in funciton module
HRHAP_0DOC_MAX_NO_PART_APPER
it's quite clear, there is no special logic for 360 appraisal , the formula is always set to :
no_of_part_appraisers = ( c_column_max_number - l_total_columns )
DIV l_part_columns.
so i think it's not possible to use OSA to depict an REAL 360 appraisal without maximum appraiser limitation.
the maxi number is (18 -1) / 1 = 17
which is really a pitty...
br.
zj

Changing Header data in the part appraisal document

I have implemented a BADI using the definition HRHAP00_ACC_HEADER. The next step is to ensure that at Category level the Changes to Part Appraisal enhancements is selected on the Enhancements tab page. However, the enhancement is not displayed in the tab selection - please tell me how to display it or do i need to add it to a specific table?

Hello,
the enhancement areas allowed under "further template behaviour" are:
BA         Column Access
BB         Pushbutton Access
BC         Business Check
D1         Default Appraiser
D2         Default Appraisee
DE         Default Execution Period
DN         Default Appraisal Name
DP         Default Part Appraiser
DR         Default Review Date
DV         Default Validity Period
PM         Maximum Number of Part Appraisers
So:
1) choose one of these areas for your enhancement
2)Locate this area in T77HAP_EX_AR, double click on it and add a new entry with the filter value for the BADI you want (note that the matchcode will not show it, but you can enter the name of the filter in field "enhancement". When you hit "enter" it will be recognized and the descriptive text will be automatically entered in field "text").
3) Enable your enhancement at category level
4) Select it from "further template behaviour" (you should add a row in the pop-up window, note that first the system asks for the enhancement area so be sure to choose the one you chose before in T77HAP_EX_AR).
5) Enjoy!
Hope it helps
Regards,
Rodrigo

History of Appraisal Document for an Employee MSS

Dear Expert.
I am implementing PM (Appraisal Document) ESS/MSS with BP 1.41. However I have the following doubt:
When an employee had a "Organizational Change" and the boss want see the appraisals that were did for this emplooyee.
My question is: With the MSS The boss can see this appraisal also ?
Thanks in advance
Regards
Carmen

In order to display an appraisal document, access to the template, the
appraiser and the appraisee is needed. Besides the two ways outlined
above, you can also disable the authority check against the appraiser.
You can do this in the appraisal template in the 'Processing' tab; the
setting is called 'No Authorization Check for Appraiser'. Despite the
slightly misleading description, this option disables the check against
the appraiser, so for accessing a document only the objects of the
template and the appraisee are checked. This is convenient, if managers
should be able to see old documents of their employees, no matter who
did the appraisal.
To enable that flag in the template, you might need to unrelease the
template first. In your test system you can either set the flag directly
in table 'HRP5025' or take a look at note '888650'. The report included
in that note allows you to temporary unrelease a template. If you use
that report, please only change this flag, since changing other
settings, might result in data inconsistency. When you are finished,
release the template again.
or if you dont want to set this parameter, you can consider the BADI
In order to see or find an appraisal document, you need to have
structural authorization for the objects involved; for all employees and
the appraisal template.
In case 1, the appraiser of department 2 does not have the authorization
to display the personal data of appraiser 1.
In case 2, appraiser 2 does not have the necessary authorization to
display the appraisee of the document.
Thus this is the expected system behavior. I can think of two possible
solutions:
1) You could enhance the structural authorization of the affected
appraisers.
2) Implement the BAdI 'HRHAP00_AUTHORITY'. With this BAdI you can
whitelist certain documents by adding them to 'T_APPRAISAL_ID'. If you
set 'NO_STANDARD_CHECK', these documents pass the authorization check
and can be displayed.
Edited by: Siddharth Rajora on Aug 30, 2011 3:41 PM

Need Single Billing Document for Materials and Services in Sales Order

Hello Friends,
I am selling FERT items and DIEN items in the Sales Order.
Document flow as follows:
Finished goods - Order-Delivery-Billing
Services - Order-Billing
In this process 2 seperate billing documents are created
i. Delivery Related Billing document for Finished goods.
ii. Order related Billing document for services.
I want to create a single billing document for both the items (FG & Services) in the sales order.
Please suggest.
Thnx.

Sorry for the delay friends.
Somebody suggested me to make services 'relevant for delivery' to ensure single billing document.
What I did were the following steps:
1. Copy Item Category TAD to ZTAD and make is 'relevant foir delivery'
2. Assign Item Category ZTAD to Sales Order type and Item Cat Group 'LEIS'
3. Go to Deliveries Item Categories and through new Entries add ZTAD. Make ZTAD relevant for Picking.
4. Go to copy control 'Order to Delivery' and insert ZTAD in Item Categories relevant for this combination.
Now when I create sales order with materials and services, they pass over to the delivery document and in the Services item, storage location/plant is greyed out. Only the picking quantity is required to be filled.
PROBLEM :
I am not getting the price of Services item in the billing document.
Billing document copies all line items (tangible and intangible) from Delivery Document
It takes the services item details/quantities etc. to VF01 but the price comes '00.00'
Any suggestions.
Is this legally viable? Someone told me its not legally correct.
Thanks.
Mohammed

Changes documents for BOM and Routing

How Can I find the change documents for a BOM and routing?

Change Documents For BOM
CS80 - Material BOM
CV80 - Document Structure
IB80 - Equipment BOM
IB81 - Functional Location BOM
CS81 - Standard BOM
CS82 - Order BOM
CS83 - WBS BOM
Change Documents for Routings
CA60 - Task List Changes
CA61 - Routing
CA62 - Reference Operation Set
CA63 - Rate Routing
CA64 - Reference Rate Routing
Hope the above may help you.

Submit a document for approval and accompany with supporting documents

Frequently, the document that is being submitted for approval, requires to be accompanied by supporting documents which may be Excel spreadsheets and/or Word documents and/or Autocad Drawings and/or PDF documents.
How can I route these supporting documents along with the document being processed for approval?
Thank you very much for your guidance.

Do you have Sharepoint Standard License?
I think what you need is start working with Document Sets. You can create workflow to Documents sets that treat multiple documents as if it's an archive.
http://blogs.technet.com/b/vedant/archive/2010/04/21/using-the-document-set-feature-in-sharepoint-2010-part-1.aspx

How to setup a document for tabloid and letter printing?

Hello,
I need to make a brochure. It is 4 pages. We need it for two different end products:
1) Printed onto double-sided 11 x 17 tabloid in a landscape orientation. It will then be folded in the middle (so a 4 page brochure).
2) A 4-page 8.5 x 11 PDF, for clients to print out themselves.
I originally had a 2 page tabloid document (no facing pages). It worked great when I sent it to our printers, but I couldn't PDF it properly to 8.5 x 11. What I ended up doing was making a brand new 8.5 x 11 document, then laying out each individual letter-sized page.
When changes are required, I have to make changes to both documents, which is annoying and open to error/mistakes from me (e.g. change in one document not in the other).
Is there any way I can have a single document setup so that I only need to change output/export/print settings when making my two different end products?
My skill level in InDesign is beginner, so alot of terminology is beyond me.

Did you know that you can place an InDesign document into another InDesign document?
Start with your letter-size version, and make sure it's up-to-date. Save it, close it, then start a new empty tabloid document. Go to File -> Place and place the four pages of your letter-size document into your tabloid document.
When you need to update both docs, then make the text changes in the lettersize doc. Save and close, then open up the tabloid doc and update the links. In fact, unless you've changed the way your install of ID is set up, then the moment you open the tabloid doc, it should ask you if you want to update your out-of-date links.

Need documents for interfaces and extensions and forms...

hai friends,,
i need to assist my functional team..for creation of functonal design for reports , interfaces and extensions and forms...
can aby body send me the documents or post here??
Thanks in advance...
regards
anand

Hello,
try these:
Universe Design on RDBMS:
http://help.sap.com/businessobject/product_guides/boexir31/en/xi31_designer_en.pdf
Universe Design on OLAP:
http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_sap_olap_universes_en.pdf
WebI:
http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_web_intelligence_java_report_panel_en.pdf
http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_web_intelligence_formulas_functions_calculations_en.pdf
Regards
-Seb.

Document for forms and report

Could someone guide me to a metalink document Id that has Oracle 10g Forms and report guide.

Any site where I can download PDF for Oracle form and report 10g version apart from oracle.com

Part appraisal document for self and subordinates

Similar Messages

Maybe you are looking for