Part I register

hi friends,
           while posting excise invoice in J1iex..for stock material, i am getting an error
                "No Part I exists for availing credit in excise invoice 20000012 2008"
                       can any one tell me the reason and solution for this...
thank u in advance...

hi
at time of gr use no excise
step1 go to j1iex and capture the excise with ref of gr doc
step2 then update the part 1 entry manually in j1i5
step 3 then post excise in j1iex with ref of int invoice no given in step 1
as the part 1 is not updated u r getting the error
hope it help
regards
kunal

Similar Messages

Excise Invoice Cancellation did not update RG23A Part-II Register ?

Hi, Dear's
I have cancelled Excise Invoice (T.Code J1IIN), system shows reversal accounting entry generated thru J1IH
BUT did not update RG23A Part-II register
Thanks
SR

HI
As far as i know there is no part 1 or part 2 for RG1 register.
regards
Prashanth

RG23A PARTI & PARTII register & tab is not updating in MIGO by 103 105 mvt

Hi Experts,
I am doing MIGO by 103 & 105 movements. My problem is RG23A PARTI & PARTII register is not updating & also in Detail DATA (below the header details tab) Excise ITEM tab is also not coming.
I have done the configuration like LOG GEN->Tax on Goods Movements ->under business transcations->Incoming excise details->specify movement types involve in excise invoices.
Actually, after doing MIGO PARTI is updated in table J_1IPART1 but no values updated for J_1IPART2.
Can anybody help me?
Thanks
Trupti

Hello
as per you part1 values updationg while doing the time of migo and part2 values not updating while doing the j1iex post .
your not getting the excise tab on details so check the tax code mentioned in po assigned the co code or not ?
if your using the TAXINN procedure check the condition records in fv12.
check the j1id settings for material and vendor.
Regards
Laxman

Opening Balnce is not showing correctly in RG23A PART II register print

Dear All,
I am using J2I6 transaction for printing RG23A PART II register. I had maintained initially the correct Opening balances two year back in table J_2IACCBAL . But currently in register print out,, the figures coming is not matching with GL Balance .
I tried to correct Opening balances in table J_2IACCBAL and again exctrating data using J2I5 but balances as per GL is not getting corrected.
regards,
Sanjay

Hi,
Check table J_2iaccbal, whether the opening balance is updated or not. This table must have entries in order to reflect on the register.
Regards,
SAPFICO

Reg:RG 23 A Part ii Register

Hi Guru,
Refer Enclosed word screenshot. I am testing a Import Procurement.
Error has been encountered while testing RG23A Part II Register. The SHE. Cess Duty Component is getting debited (Subtracted) instead of getting Credited(Added).
With reference to testing for SSP I have found there are a number of errors in regards to RG23A Part II register.
I have problems in RG23A Part II register while doing import booking, local purchase , JV Posting, Reversal of assembly Production invoices.
please give me the information on this issue.
Best Regards
sivakumar

Hi,
Please check the account key for the tax code inOB40for the SHECess and find whether it is VS3 or not for which the GL account mainatained or not.
Regards,
Gangadhar

RG 23 A Part ii Register

Hi sap,
Refer Enclosed word screenshot. I am testing a Import Procurement.
Error has been encountered while testing RG23A Part II Register. The SHE. Cess Duty Component is getting debited (Subtracted) instead of getting Credited(Added).
With reference to testing for SSP I have found there are a number of errors in regards to RG23A Part II register.
I have problems in RG23A Part II register while doing import booking, local purchase , JV Posting, Reversal of assembly Production invoices.
please give me the information on this issue.
Best Regards
karan

Hi john,
Follow the following check list.
1. check the account key for the tax code in OB40 for the SHECess and which the GL account mainatained.
2. Check the Account Determination configuration in Tax on Goods movement -> India--> Account Determination.
I doubt that you have prob. with standard config. only. check it throughly.
Cheers.......
manoj singh

Change opening balance RG 23A part II register

Dear Expert,
I want to change Opening balance for RG 23 A part II register for both the field excise duty and Education cess,
while i am executing this transaction J2I6 the amount need to change.
CIN configuration already done from 2006 and that time some balance is laying on opening balance for excise duty and no balance for Edu cess. So i want to change for both the amount, Please advice.
I have attached the screen shot for reference with marked yellow colors for those fields .Please advice.

Dear Mani/Sampat,
Thank you for your answer,
Sorry for delay in response as per your comment now i can able to modification the opening balance with table J_2IACCBAL.
I have one more query regarding outgoing excise capturing in RG 23 A part II register.
Could you please advice how can the report capture the debit balance for outgoing excise invoices.
The incoming excise invoices captures perfectly in this register.i have attached screen shot for your reference.

Debit entries in part 2 register for rejected materials

Hi,
GR posted, part1 and part2 posted. Later material rejected, and with reference to rejected material document we have created Excise invoice (thru T.Code J1IS).
We observed part1 register get updated, but part 2 register has not updated. But entries observed in the table J_1Ipart2(but with register type is 'D' despatch type).
Please advice, how can we get updated in part2 register??
Regards,
Sattuj

Hi Satuj,
Process you are following is absolute fine. If you see accouting entries in J1is these are reversed entries from register part 2.Only you need to check the proper GL code if they are assigned in customizing.This you can check in IMG>logistic general> tax on goods movement path --> India --> Account determination --> Specify excise gl code as per escise TT .
Here you check the GL entries with respect to excise TT OTHR
I hope you will find your solution
Regards
Vivek Sharma
-- Reward if helpful

Movement Type 161, posts receipt in RG23A Part I Register

Hi Experts !
While making Goods Issue against Return P.O. , Movment Type 161 trigers Receipt part of RG23 A Part I Register .
MMBE shows the stock reduced from Stock, but why it is updating as receipt in RG23 A Part I instead of Issue part.
Can anybody help me ?
Is there any configuration in CIN to be done against Movement Type 161 ?

.

Cancel Part 1 register

Dear All;
In this scenario We have received goods to quality inspection now the goods is moved to Unrestricted stock ,after that it required to return the material to vendor ,we have done the Material Return through MBRL ,The quntity in stock is reversed ,I have observed that the Part register is reversed .how to reverse the entry for part one register .Kindly suggest
Regards;
Joydeep Mukherjee

hi,
Check in J1IEX - display > vendor invoice and check the Part 1 entry as see that 1st line item is Receipt and there should be a 2nd line item issue then only you can cancel this document.
Select Cancel option > select vendor invoice no and give the rejection code in misc. tab and save it will cancel the entry.
If you get an error message cancel material document first means that you have to cancel the GR document first before canceling this vendor invoice entry in Part 1 register.
kiran

Accounting document no. in Excise part II register

What work around needs to be done to get accounting document no. in excise registers or part II sl. No. in Accounting document.
BSR

Hi,
Check table J_2iaccbal, whether the opening balance is updated or not. This table must have entries in order to reflect on the register.
Regards,
SAPFICO

RG 23 Part A II Register Query Report

Dear Experts,
Kindly provide RG 23 A Part II Register Query based Report.
Regards
Amol

Hi Amol
You can try the sap RG Report in following path you can import and check.
Go to SAP Installation Folder-->Packages-->Country Specific Content-->Indian Legal Report.
With Regards
Balaji Sampath

Updation of RG23A register (PART II) with Vendor Rejection

Dear ALL
We are doing the Vendor Rejection with mvmt type '122' with good issue indicator 'IPD' . The Part I register is updated perfectly. after MIGO , we create excise Invoice thru J!IS (Posting of Excise Invoice). Here perfectly the GLs are getting effected but the Part II register is not carrying the effect. The J_1iPart2 table hold these entry with Register Type 'D' , and the same is not located in Part II print out .
Can any one help me to resolve this issue , the user wants the details of Vendor Return Excise in the PART II register .
Regards
AVS

Hi Anjali,
Go to SPRO-Log Gen-Tax on goods movement-India-Account determination
-Specify excise accounts per transactions
Here check whether Debit/Credit & Account name are maintained properly for OTHR.
Also check whether you are using subtransaction type for Return to vendor, if yes then OTHR with that sub trax type should have been maintained.
Now-Specify G/L acct per trax-
Here check the G/L assignments for yous excise group & trax type 'OTHR' (Also sub trax type, if it is there).
Also make sure, you are selecting 'Only part 1' option at the time of 122.
Check all these settings,
Regards,
Piyush

Excise Invoice (J1IIN) Cancelltion did not update RG23A Part-II

Hi, Dear's
I have cancelled Excise Invoice (T.Code J1IIN), system shows reversal accounting entry generated thru J1IH
BUT did not update RG23A Part-II register
Thanks
SR

Hi,
1)Have U created Master Data in J1ID,If U are allready Created Master Data pls Check Mtrl Type(It should not Non Cenvatable)
2)If you are following TAXINN,Then u should maintain Tax code to Company code.
If u are Using TAXINJ,U should maintain Excise Defaults.
3)In Excise Group,U should Activate MIGO transactions.
4)Check ur TAX code,Tax code is Deductable or non dedctable.
Raghu

Excise Goods Receipt Without Only Part I

Hi,
We have done a goods receipt for an excisable material.
At the time of goods receipt, we could not select "Only Part I"
Now we want to post the Vendor Excise Invoice,
I just ran the T Code J1I5 with Classification ROP and I am able to update the RG Part I Register,
Now I want to post the excise value using T Code J1IH. Here I am confused which button to select . Here we get options like Additional excise, Other adjustment.
Request you to please guide.
What is the best way to handle this type of situation.
Regards,

Hi PK,
The amount what u are seeing in the top is the cumulative amount for that month. What u have to do before doing the MMPV that select the value based on the account for e.g RG23BED then select the line and press the create menu button in the tool bar and then it ask in which account need to post it (i.e) at the bottom account. u have to select the top and bottom are the same one then if u save it once the system take entire amount in the top and deduct the same from the bottom account.
That means the amount in the register will get reduce. The amount what ever u did the utilisation that will go and sit in the PLA account. From the PLA account the amount will be disbursed to the excise department. If u have not done then your PLA account will be more that means u have to pay more to your excise department without set-off amount.Loss to company.
a. we are in back-log mode right now, if we don't run J2IUN, what will happen?. Is this statutory? Or will it impact our financial?
Not a problem all back -log can be utilised at one shot and if u not run the J2IUn your set-off amount cannot be get back from excise.It is statutory.Yes it will impact your financial means your paying the both input and out put tax to the excise.
b. what if I run J2IUN after we complete all the backlogs or year end?
You have to do as a monthly basis not a year basis.Last financial year back log cannot be utllised for this year.
c. What query should I put across to our client to know about their existing process?
Whether they have a set-off process (Earlier they used to call Modvet) or all input taxes are inventories. Only this transaction is right for all the set-off invoices.i am sure all the OEM will have the set-off requirement
d What query should I put across to our FI Consultant regarding this T Code.
Ask him whether he checked all the GL balance for all these registers for ex RG23ABED get Zero. whether he is checking the PLA account. The output tax and input tax is properly got off-set.All the Excise GL Need to be reconcile at the month end. This is very very important activities.
e. Is this the job of MM User or FI User (so that I can accordingly impart the KT)
Utilisation is MM activity but FI consultant need to be with u because the posting date what ever u are giving in the input selection screen for the J2iUN that he has to tell . What ever date u give them system will post the accounting doc for that period. so be carfrul.
Thanks
Ganesh

Part I register

Similar Messages

Maybe you are looking for