Partial result set in LOV

I am working with BO XI R3 and back end as DB2.
I am facing a partial LOV results set:
From my analysis I have the following:
1)This error occurs with a particular table
2)The number of rows that are being fetched from the database are 44,018,911 rows (nearly 44 million) out of which 178,940 rows are unique ones
3)These rows are not cached/stored daily. Hence each and everytime the report is run it has to fetch from the DB and bring it to the report.
4)On the Universe front, checked with the Universe File-->Parameters tab and "Limit size and time" are unchecked
5)On the report front there is no limiter for the number of rows.
I am not sure but where the tuning has to be done? At the DB front (DB2 is my back end) or on the Universe front (BO XIR3). 1 ) Which would better 2) In case the tuning has to be done on the Universe front how does it need to be done?

Are you getting this one on the Webi report Lovis or Deski Report
If its a webi report you need to change in the Webintelligence Processing server Properties.
The Default vales fro the Maximum List of values size entries is 50000 Lovs

Similar Messages

Af:inputListOfValues sets value of first item in result set when using enter key or tab and component set to autosubmit=true

I'm using JDev 11.1.1.6 and when I type a value into an af:inputListOfValues component and hit either the enter key or the tab key it will replace the value I entered with the first item in the LOV result set. If enter a value and just click out of the af:inputListOfValues component it works correctly. If I use the popup and search for a value it works correctly as well. I have a programmatic view object which contains a single transient attribute (this is the view object which is used to create the list of value component from) and then I have another entity based view object which defines one of its attributes as a list of value attribute. I tried using an entity based view object to create the LOV from and everything works as expected so I'm not sure if this is a bug when using programmatic view objects or if I need more code in the VOImpl. Also, it seems that after the first time of the value being replaced by the first value in the result set that it will work correctly as well. Below are some of the important code snippets.
Also, it looks like it only doesn't work if the text entered in the af:inputListOfValues component would only have a single match returned in the result set. For instance given the result set in the code: Brad, Adam, Aaron, Fred, Charles, Charlie, Jimmy
If we enter Cha, the component works as expected
If we enter A, the component works as expected
If we enter Jimmy, the component does not work as expected and returns the first value of the result set ie. Brad
If we enter Fred, the component does not work as expected and returns the first value of the result set ie. Brad
I also verified that I get the same behavior in JDev 11.1.1.7
UsersVOImpl (Programmatic View Object with 1 transient attribute)
import java.sql.ResultSet;
import java.util.ArrayList;
import java.util.Iterator;
import java.util.List;
import oracle.adf.share.logging.ADFLogger;
import oracle.jbo.JboException;
import oracle.jbo.server.ViewObjectImpl;
import oracle.jbo.server.ViewRowImpl;
import oracle.jbo.server.ViewRowSetImpl;
// ---    File generated by Oracle ADF Business Components Design Time.
// ---    Wed Sep 18 15:59:44 CDT 2013
// ---    Custom code may be added to this class.
// ---    Warning: Do not modify method signatures of generated methods.
public class UsersVOImpl extends ViewObjectImpl {
    private static ADFLogger LOGGER = ADFLogger.createADFLogger(UsersVOImpl.class);
    private long hitCount = 0;
     * This is the default constructor (do not remove).
    public UsersVOImpl () {
     * executeQueryForCollection - overridden for custom java data source support.
    protected void executeQueryForCollection (Object qc, Object[] params, int noUserParams) {
         List<String> usersList = new ArrayList<String>();
         usersList.add("Brad");
         usersList.add("Adam");
         usersList.add("Aaron");
         usersList.add("Fred");
         usersList.add("Charles");
         usersList.add("Charlie");
         usersList.add("Jimmy");
         Iterator usersIterator = usersList.iterator();
         setUserDataForCollection(qc, usersIterator);
         hitCount = usersList.size();
         super.executeQueryForCollection(qc, params, noUserParams);
    } // end executeQueryForCollection
     * hasNextForCollection - overridden for custom java data source support.
    protected boolean hasNextForCollection (Object qc) {
         Iterator usersListIterator = (Iterator)getUserDataForCollection(qc);
         if (usersListIterator.hasNext()) {
             return true;
         } else {
             setFetchCompleteForCollection(qc, true);
             return false;
         } // end if
    } // end hasNextForCollection
     * createRowFromResultSet - overridden for custom java data source support.
    protected ViewRowImpl createRowFromResultSet (Object qc, ResultSet resultSet) {
         Iterator usersListIterator = (Iterator)getUserDataForCollection(qc);
         String user = (String)usersListIterator.next();
         ViewRowImpl viewRowImpl = createNewRowForCollection(qc);
         try {
             populateAttributeForRow(viewRowImpl, 0, user.toString());
         } catch (Exception e) {
             LOGGER.severe("Error Initializing Data", e);
             throw new JboException(e);
         } // end try/catch
         return viewRowImpl;
    } // end createRowFromResultSet
     * getQueryHitCount - overridden for custom java data source support.
    public long getQueryHitCount (ViewRowSetImpl viewRowSet) {
         return hitCount;
    } // end getQueryHitCount
    @Override
    protected void create () {
         getViewDef().setQuery(null);
         getViewDef().setSelectClause(null);
         setQuery(null);
    } // end create
    @Override
    protected void releaseUserDataForCollection (Object qc, Object rs) {
         Iterator usersListIterator = (Iterator)getUserDataForCollection(qc);
         usersListIterator = null;
         super.releaseUserDataForCollection(qc, rs);
    } // end releaseUserDataForCollection
} // end class
<af:inputListOfValues id="userName" popupTitle="Search and Select: #{bindings.UserName.hints.label}" value="#{bindings.UserName.inputValue}"
                                              label="#{bindings.UserName.hints.label}" model="#{bindings.UserName.listOfValuesModel}" required="#{bindings.UserName.hints.mandatory}"
                                              columns="#{bindings.UserName.hints.displayWidth}" shortDesc="#{bindings.UserName.hints.tooltip}" autoSubmit="true"
                                              searchDesc="#{bindings.UserName.hints.tooltip}"
                                              simple="true">
                          <f:validator binding="#{bindings.UserName.validator}"/>
</af:inputListOfValues>

I have found a solution to this issue. It seems that when using a programmatic view object which has a transient attribute as its primary key you need to override more methods in the ViewObjectImpl so that it knows how to locate the row related to the primary key when the view object records aren't in the cache. This is why it would work correctly sometimes but not all the time. Below are the additional methods you need to override. The logic you use in retrieveByKey would be on a view object by view object basis and would be different if you had a primary key which consisted of more than one attribute.
@Override
protected Row[] retrieveByKey (ViewRowSetImpl viewRowSetImpl, Key key, int i) {
    return retrieveByKey(viewRowSetImpl, null, key, i, false);
@Override
protected Row[] retrieveByKey (ViewRowSetImpl viewRowSetImpl, String string, Key key, int i, boolean b) {
    RowSetIterator usersRowSetIterator = this.createRowSet(null);
    Row[] userRows = usersRowSetIterator.getFilteredRows("UserId", key.getAttribute(this.getAttributeIndexOf("UserId")));
    usersRowSetIterator.closeRowSetIterator();
    return userRows;
@Override
protected Row[] retrieveByKey (ViewRowSetImpl viewRowSetImpl, Key key, int i, boolean b) {
    return retrieveByKey(viewRowSetImpl, null, key, i, b);

Create a CF Query Result Set in Java

I'd like to programatically build a ColdFusion query resultset inside of a Java class and return it to the calling application. See the Java psudocode below to see what I'm talking about:
public class MyClass {
     public coldfusion.sql.QueryTable getQuery() {
          // Create a query table object
          QueryTable myTable = ..?
          // Loop through some set of instance data for my class
          for(int c = 0; c < this.myWigets.length; c++) {
               int row = c+1;
               myTable.setField(row, nameCol, this.myWigets[c].name);
               myTable.setField(row, colorCol, this.myWigets[c].color);
          return myTable;
I've had stuff like this partially working in the past but had issues with things like query of queries and such probably due to the hacks used to create the QueryTable object. I'm mainly just checking in to see if there has been any progress made in this area. To me this seems like such an obvious thing for a Java developer working within CF to want to do. I'm surprised Adobe doesn't have an officially supported API for doing this sort of thing (or maybe I'm just too dumb to find it.) A few other notes... I'm not using CFX, and I'm not starting with a java.sql.ResultSet otherwise I would use the QueryTable(java.sql.ResultSet) constructor. I need to build this thing from scratch programatically.
Thanks for your time. I hope this question makes sense to someone out there.
- Mike

I appologize. I wasn't very clear with my original question.
I'm creating an instance of my Java class from within CF using createObject("java", "com.example.MyClass"). So based on the sample code in my original post on the CF side I'd like to do something like this:
<cfscript>
     myObj = createObject("java", "com.example.MyClass");
     myObj.doSomeStuff();
     myCFQuery = myObj.getQuery(); // Return a CF query from my java class
</cfscript>
... then do stuff like ...
<cfquery name="mySortedQuery" dbtype="query">
     select     *
     from       myCFQuery
     order      by color
</cfquery>
I appriciate your suggestions so far. I have other solutions working already but they are not ideal. I was just hoping someone had a clean and as-hack-free-as-possible way of creating a ColdFusion query result set in Java and passing it back to CF.
Thanks again,
Mike

SUP 2.1 LDAP error "Partial results returned."

Hi everybody,
I'm configuring a SUP 2.1 server to authenticate users using a MS Active Directory server.
I'm facing the following issue: whenever I try to login to my test app I get the following error:
Partial results returned. Operation not completed (Unprocessed Continuation Reference(s)).
even if I set referral=follow and scope=subtree. The strange thing is that I get the same error with a java-based Ldap broser (JXplorer) but not with a non-java one.
Anyone faced the same issue before?
Thank you very much,
Francesco

Hi,
thank you for your answer.
We tried as you suggested but no luck.
I suspect that this error is due to some AD configuration on this (DEV) server. We tried connecting the LoginModule to a PROD server (with a lot of users) and everything works fine.
The AD teams told me that the only difference is that the DEV server is not behind a DNS so I have to use the IP address in the configuration.
Thank you again,
F

Partial results sign Webi

Hie Guys,
My report has a yellow triangle sign at the bottom right of the report for partial results. The database for the Universe was recently migrated to a new engine and server. Could this be the reason for the partial results in the report? Thanks.

Can you do below check.
Fire the same query in database and see the number of records count.
Check the record count in BO.
As you have said, you have already unchecked the universe limit and report limit options, check for below options also.
What is set as Limit execution time in your universe connection and universe control tab.
And also in the query properties of report related to execution.

Getting Partial Results

Hi all,
I'm executing a big report in webi, and I'm getting the partial results message.
I changed the Universe parameters to 10,000 rows and time limit to 10min but I'm getting just 3 rows, and I know the report has more rows, because I ran it from SQL developer I'm working with Oracle.
I can not disable the limits, because the standards of my environment don't allow it.
Do you know why I'm getting just 3 rows? if the limit is 10,000.
Thank you,
Marcela

Were you receiving more records before you put the limit to 10000 records at the universe level?
If it was the case, increase the limit to 1000000 records.
The problem with returning only 3 records when the limit is 10000, the record set being returned might be 10000 but due to filters or joins in the front end the records being displayed might be only 3
About checking if your account/group has custom restriction on it, that needs to be checked under Tools -> Manage Security -> Manage Access Restrictions
See if there are any entires in that section.
Edited by: Gaurav Patel on Sep 16, 2008 6:56 PM

BW Web Report Issue - Result set too large

Hi,
When I execute a BEx Query on Web I am getting “Result set too large ; data retrieval restricted by configuration (maximum = 500000 cells)”.
Following to my search in SDN I understood we can remove this restriction either across the BW system globally or for a specific query at WAD template.
In my 7x Web template I am trying to increase default max no of rows parameters, As per the below inputs from SAP Note: 1127156.
But I can’t find parameter “Size Restriction for Result Sets” for any of the web items (Analysis/Web Template properties/Data Provider properties)….in the WAD Web template
Please advise where/how can I locate the properites
Instructions provided in SAP Note…
The following steps describe how to change the "safety belt" for Query Views:
1. Use the context menu Properties / Data Provider in a BEx Web Application to maintain the "safety belt" for a Query View.
2. Choose the register "Size Restriction for Result Sets".
3. Choose an entry from the dropdown box to specify the maximum number of cells for the result set.
The following values are available:
o Maximum Number
o Default Number
o Custom-Defined Number
Behind "Maximum Number" and "Default Number" you can find the current numbers defined in the customizing table RSADMIN (see below).
4. Save the Query View and use it in another Web Template.
Thanks in advance

Hi Yasemin,
Thanks for all help...i was off couple of days.
To activate it I can suggest to create a dummy template, add your query in it, add a menu bar component add an action to save the query view. Then you run the template and change the size restriction for result set then you can save it by the menu.
Can you please elaborate on the solution provided,I created dummy template with analysis and Menu bar item...i couldn't able to configure menu bar item...
Thanks in advance

How can I use ONE Text search iView to event/affect mutliple Result Sets?

hello everyone,
i have a special situation in which i have 6 flat tables in my repository which all have a common field called Location ID (which is a lookup flat to the Locations table).
i am trying to build a page with a free-form text search iView on Table #1 (search field = Location ID). when I execute the search, the result set for Table #1 is properly updated, but how do I also get Result Set iViews for Tables #2-6 to also react to the event from Text Search for Table #1 so that they are updated?
i don't want to have to build 6 different text search iViews (one for each table). i just want to use ONE text search iView for all the different result set tables. but, in the documentation and iView properties, the text search iView doesn't have any eventing.
if you have any suggestions, please help.
many thanks in advance,
mm

hello Donna,
that should not be a problem, since you are detailw with result sets and detail iviews because custom eventing can be defined for those iviews.
Yes, it says "no records" found because an active search and record selection havent' been performed for it (only your main table does).
So, yes, define a custom event, and pass the appropriate parameters and you should be fine.
Creating a custom event between a Result Set iView and an Item Details iView is easy and works. I have done it.
See page 35 of the Portal Content Development Guide for a step-by-step example, which is what I used.
For my particular situation, the problem I'm having is that I want the Search Text iView's event (i.e., when the Submit button is pressed) to be published to multiple iViews, all with different tables. Those tables all share some common fields, which is what the Search iView has, so I'd like to pass the search critera to all of the iViews.
-mm

Access Subform - Can the Subforms Source Object be defined by an SQL SP result set?

Hi Guys,
I can't clearly answer this question with a yes or no.
I have an Access Sub Form that I am populating with a record set from a Store Procedure. Fairly early on I discovered that for this to work correctly the Source Object for the Sub Form Control must be set first, and most examples (including a working version
of my own) achieve this by defining an Access Query and setting the Source Object to this.
What I would really like to do is define the Source Object using the results of a SQL Store Procedure using ONLY code within VBA.
Now before anyone starts providing alternatives "why don't you just..." I'm noting now that I have a semi complex solution that makes most non-VBA based approaches ineffective. While it does work at present with an Access Query I'm needing
to make the result set more dynamic meaning in future I will not know how many columns will be returned or the name of them, only the SP will have this information.
Thanks in advance!

Well after much trial and error I've got something which does what I want, although I'm not thrilled that I couldn't do this via my existing ADODB connections, in any case example provided below;
    Dim db As DAO.Database
    Dim qdf As New DAO.QueryDef
    Set db = CurrentDb()
   'qryMyTest refers to a dummy Access query (non pass through).
    With db.QueryDefs("qryMyTest")
        .Connect = CurrentDb.TableDefs("tblSomeTestSQLTable").Connect
        .SQL = "exec sp_MyTestSP"
        Me.subfrmTest1.SourceObject = "Query.qryMyTest"
    End With
    Set qdf = Nothing
I've also marked your response Alphonse as an answer as it lead me onto the right path.

SCROLL_SENSITIVE result set can't see the data inserted.

hi all ,
I am trying to display all the latest data available in the table through SCROLL_SENSITIVE and UPDATABLE result set after inserting a new record in the table.
But the result set obtained after executing the query initially is not able to see the newly inserted record in the table and hence same result is getting printed out in both the cases.
Can u explain me what's happening in this case ?? And how can i get the updated record also without executing the statement query twice to get the latest result set.
My full code is given below.
import java.sql.Connection;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.sql.Statement;
public class Misc3 {
public static void main(String[] args) {
Connection con = null;
Statement stmt = null;
ResultSet rs = null;
try {
int empid;
String lname;
String fname;
int deptno;
int mngrid;
con = JDBCUtil.getOracleConnection();
stmt = con.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_UPDATABLE);
String query = "select employee_id , last_name , first_name , department_number , manager_id from employees ";
rs = stmt.executeQuery(query);
System.out.println("Before inserting the new record.....");
while (rs.next()) {
empid = rs.getInt(1);
lname = rs.getString(2);
fname = rs.getString(3);
deptno = rs.getInt(4);
mngrid = rs.getInt(5);
System.out.println(empid + "\t" + lname + "\t" + fname + "\t" + deptno + "\t" + mngrid);
System.out.println("Going to insert the new record.....");
rs.moveToInsertRow();
rs.updateInt(1, 10);
rs.updateString(2, "Clark");
rs.updateString(3, "John");
rs.updateInt(4, 2);
rs.updateInt(5, 2);
rs.insertRow();
System.out.println("New record inserted successfully.....");
System.out.println("After inserting the new record.....");
rs.beforeFirst();
while (rs.next()) {
empid = rs.getInt(1);
lname = rs.getString(2);
fname = rs.getString(3);
deptno = rs.getInt(4);
mngrid = rs.getInt(5);
System.out.println(empid + "\t" + lname + "\t" + fname + "\t" + deptno + "\t" + mngrid);
} catch (SQLException ex) {
System.out.println("error code : " + ex.getErrorCode());
System.out.println("error message : " + ex.getMessage());
} finally {
JDBCUtil.cleanUp(con, stmt);
*** JDBCUtil Class ****
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.ResultSet;
import java.sql.Statement;
public class JDBCUtil {
public static Connection getOracleConnection(){
Connection con = null;
try{
// Load the driver
Class.forName("oracle.jdbc.driver.OracleDriver");
//Establish Connection
con = DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:XE","ex","ex");
}catch(Exception ex){
ex.printStackTrace();
return con;
public static void cleanUp (Connection con , Statement stmt){
// Release the resource
try{
if(con != null){
con.close();
if(stmt != null){
stmt.close();
}catch(Exception ex){
ex.printStackTrace();
Edited by: user12848632 on Aug 13, 2012 2:06 PM

>
Can u explain me what's happening in this case ?? And how can i get the updated record also without executing the statement query twice to get the latest result set.
>
Sure - but you could have answered your own question if you had read the doc link I gave you in your other thread and next time you post code use \ tags on the lines before and after the code - see the FAQ for info
17076 : Invalid operation for read only resultset
{quote}
•Internal INSERT operations are never visible, regardless of the result set type.
{quote}
See •Seeing Database Changes Made Internally and Externally in the JDBC Dev doc I pointed you to
http://docs.oracle.com/cd/B28359_01/java.111/b31224/resltset.htm#i1024720
Did you notice the words 'never visible'? You won't see them as part of the result set unless you requery.

How to Create a new column from two different result sets

How to Create a new column from two different result sets, both the result set uses the different date dimensions.

i got solutions for this is apply filters in column formula it self, based on the requirement.

How do I create an Event Handler for an Execute SQL Task in SSIS if its result set is empty

So the precedence on my entire package executing is based on my first SELECT of my Table and an updatable column. If that SELECT results in an empty result set, how do I create an Event Handler to handle an empty result set?
A Newbie to SSIS.
I appreciate your review and am hopeful for a reply.
PSULionRP

Depends upon what you want to do in the eventhandler. this is what you can do
Store the result set from the Select to a user variable.
Pass this user variable to a Script task.
In the Script task do whatever you want to do including failing the package this can be done by failing the script task, which in turns fails the package. something like
Dts.TaskResult = Dts.Results.Failure
Abhinav http://bishtabhinav.wordpress.com/

Problem in Retrive values from result set

I have a class where i do all database operation .First i fire select query and take values from result set and based on that value i fire update query.
Problem is that i am not getting all values from result set . i get only last value and when i fire update query i get error as :Resultset is closed.
I am using acess and java.

You probably are using the same Statement object for both queries? Try creating separate Statement objects for each query. (My guess is this a problem with the way you're using JDBC, not a Servlet issue.)

Report Control and Multiple Datasets/Result Sets

I have four results sets, Plan, Forecast, Actual and SPLY per eight different product lines. I want to add conditional formatting of background color if actual is above or below Plan and/or Forecast. The report needs to export properly to Excel.
Is there a way I can use one control rather than multiple text boxes to display the data, allow for conditional formatting and export to Excel.? Thanks!
Environment:
SSRS 2010
SQL Server 2012

Hi blairv,
If I understand correctly, you have a dataset in the report which include four fields: Plan, Forecast, Actual and SPLY. Each filed contains eight values.
In SQL Server Reporting Services (SSRS), we can use table, matrix or list display report data in cells. The cells typically contain text data such as text, dates, and numbers but they can also contain gauges, charts, or report items such as images.
Reference: http://technet.microsoft.com/en-us/library/dd220592.aspx
In your case, we can use expression to configure these items background color. Please refer to the following steps:
Click a specific text box in the report. Click BackgroundColor prompt in the Properties dialog box.
Click Expression prompt. And fill with expression below:
=IIF(Fields! Actual.Value>Fields! Plan.Valeu Or Fields! Actual.Value>Fields! Forecast.Valeu,”Red”,”Blue”)
Reference: http://msdn.microsoft.com/en-us/library/ms157328.aspx
If there are any miunderstanding, please feel free to let me know.
Regards,
Alisa Tang
If you have any feedback on our support, please click
here.
Alisa Tang
TechNet Community Support

Query Error Information: Result set is too large; data retrieval ......

Hi Experts,
I got one problem with my query information. when Im executing my report and drill my info in my navigation panel, Instead of a table with values the message "Result set is too large; data retrieval restricted by configuration" appears. I already applied "Note 1127156 - Safety belt: Result set is too large". I imported Support Package 13 for SAP NetWeaver 7. 0 BI Java (BIIBC13_0.SCA / BIBASES13_0.SCA / BIWEBAPP13_0.SCA) and executed the program SAP_RSADMIN_MAINTAIN (in transaction SE38), with the object and the value like Note 1127156 says... but the problem still appears....
what Should I be missing ?????? How can I fix this issue ????
Thank you very much for helping me out..... (Any help would be rewarded)
David Corté

You may ask your basis guy to increase ESM buffer (rsdb/esm/buffersize_kb). Did you check the systems memory?
Did you try to check the error dump using ST22 - Runtime error analysis?
Edited by: ashok saha on Feb 27, 2008 10:27 PM

Partial result set in LOV

Similar Messages

Maybe you are looking for