Pass clob data

I am trying to debug a function and passing a clob column into it as parameter
decalre
val number;
begin
myrecord.myclob := 'abcdefg..............'; -- huge data, i cannot even say select length(myclob)
val := myfunction(myrecord);
end;
How can I pass in myclob (clob column) data into this function to debug ?

If the clob is huge, you can always try to pass the clob by reference instead of by value. See ORACLE-BASE - NOCOPY Hint to Improve Performance of OUT and IN OUT Parameters in PL/SQL Code

Similar Messages

Trying to pass xml data to a web service

I'm working on an Apex application that is required to pass data to a web service for loading into another (non Oracle) system. The web service expects two stings as input, the first string is simply an ID, the second string is an xml document. I generate an xml 'string' using PL/SQL in an on-submit process prior to invoking the web service. If I pass regular text for the second parameter, the web service returns an error message which is stored in the response collection and displayed on the page as expected. When I pass the the xml data, I get a no data found error and the response collection is empty. I have tried this in our development environment on Apex 3.1.2 (database version 10.2). I also tried this on our Apex 4.0.2 sandbox (with the same Oracle 10.2 database). I have found that once I have nested xml, I get the no data found message, if I pass partial xml data, I get the error response from the web service. Perhaps I am not generating the xml correctly to pass to the web service (this only just occurred to me as I write this)? Or is there an issue passing xml data from Apex to the web service? Any help will be greatly appreciated! here is the code I use to generate the xml string:
declare
cursor build_data is
    select u_catt_request_buid,u_catt_request_name,u_catt_cassette_buid,u_catt_cassette_name
      ,u_project_name,u_sub_project,replace(u_nominator,'ERROR ','') u_nominator
      ,replace(replace(u_going_to_vqc,'Yes','true'),'No','false') u_going_to_vqc
      ,u_promoter,u_cds,u_terminator
      ,u_primary_trait,u_source_mat_prvd,u_pro_resistance_1,u_vector_type
      ,nvl(u_my_priority,'Medium') u_my_priority
      ,replace(replace(u_immediate_trafo,'Yes','true'),'No','false') u_immediate_trafo
      ,replace(replace(u_new_bps_cmpnt,'Yes','true'),'No','false') u_new_bps_cmpnt
      ,u_compnt_name,u_new_cmpt_desc,initcap(u_target_crop) u_target_crop,u_corn_line
      ,u_plant_selection,u_num_of_ind_events,u_num_plants_per_event,u_molecular_quality_events
      ,replace(replace(u_field,'Yes','true'),'No','false') u_field
      ,u_t1_seed_request,u_potential_phenotype,u_submission_date
      ,u_sequence_length,u_trait,u_frst_parent,u_frst_parent_vshare_id,u_cds_vshare_id
      ,constructid,cassetteid,description
    from temp_constructs_lims
    order by constructid,description;
v_xml_info         varchar2(350);
v_xml_header       varchar2(1000);
v_xml_data         clob;
v_xml_footer       varchar2(50);
v_create_date      varchar2(10);
v_scientist_name   v_users.full_name%type;
v_scientist_email v_users.email_address%type;
v_primas_code      construct.fkprimas%type;
v_nominator_name   v_nominators.full_name%type;
v_file_length      number;
begin
-- initialize variables
v_create_date := to_char(sysdate,'YYYY-MM-DD');
v_xml_data := null;
-- get name and email address
begin
    select full_name,email_address
    into v_scientist_name,v_scientist_email
    from v_users
    where ldap_account = :F140_USER_ID;
exception when no_data_found then
    v_scientist_name := '';
    v_scientist_email := '';
    v_scientist_name := 'Test, Christine';
    v_scientist_email := '[email protected]';
end;
-- set up xml file
if :OWNER like '%DEV%' then
    v_xml_info := '
      <?xml version="1.0" encoding="utf-8"?>
      <exchange xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
                xmlns="deService"
                xsi:schemaLocation="deService http://mycompany.com/webservices/apexdataexchange/schemas/RTPCATT.xsd">
else
    v_xml_info := '
      <?xml version="1.0" encoding="utf-8"?>
      <exchange xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
                xmlns="deService"
                xsi:schemaLocation="deService http://mycompanyprod.com/webservices/apexdataexchange/schemas/RTPCATT.xsd">
end if;
-- populate xml header records
v_xml_header := '<header xmlns="">
    <stdXmlVer>2.0</stdXmlVer>
    <sendingUnit>'||:P36_UNIT_NUMBER||'</sendingUnit>
    <sendingPerson>'||v_scientist_name||'</sendingPerson>
    <notification>'||v_scientist_email||'</notification>
    <creationDate>'||v_create_date||'</creationDate>
</header>
<entities xmlns="">
for rec in build_data loop
    begin
      -- get primas code for current construct
      select fkprimas
      into v_primas_code
      from construct
      where constructid = rec.constructid;
    exception when no_data_found then
      v_primas_code := null;
    end;
    begin
      -- get nominator name for current construct
      select full_name
      into v_nominator_name
      from v_nominators
      where nominator_id = rec.u_nominator;
    exception
      when no_data_found then
        v_nominator_name := null;
      when invalid_number then
        v_nominator_name := catt_pkg.full_name_from_user_id(p_user_id => rec.u_nominator);
        v_nominator_name := 'Test, Christine';
    end;
    v_xml_data := v_xml_data||'
      <Construct>
      <requestBUID>'||rec.u_catt_request_buid||'</requestBUID>
      <requestName>'||rec.u_catt_request_name||'</requestName>
      <cassetteBUID>'||rec.u_catt_cassette_buid||'</cassetteBUID>
      <cassetteName>'||rec.u_catt_cassette_name||'</cassetteName>
      <scientist>'||v_scientist_name||'</scientist>
      <projectNumber>'||v_primas_code||'</projectNumber>
      <subProject>'||rec.u_sub_project||'</subProject>
      <comments>'||rec.description||'</comments>
      <nominator>'||v_nominator_name||'</nominator>
      <goingToVqc>'||rec.u_going_to_vqc||'</goingToVqc>
      <primaryTrait>'||rec.u_primary_trait||'</primaryTrait>
      <sourceMatPrvd>'||rec.u_source_mat_prvd||'</sourceMatPrvd>
      <prokaryoticResistance>'||rec.u_pro_resistance_1||'</prokaryoticResistance>
      <vectorType>'||rec.u_vector_type||'</vectorType>
      <priority>'||rec.u_my_priority||'</priority>
      <immediateTrafo>'||rec.u_immediate_trafo||'</immediateTrafo>
      <newComponent>'||rec.u_new_bps_cmpnt||'</newComponent>
      <componentName>'||rec.u_compnt_name||'</componentName>
      <newComponentDescription>'||rec.u_new_cmpt_desc||'</newComponentDescription>
      <targetCrop>'||rec.u_target_crop||'</targetCrop>
      <Line>'||rec.u_corn_line||'</Line>
      <plantSelection>'||rec.u_plant_selection||'</plantSelection>
      <numOfIndEvents>'||rec.u_num_of_ind_events||'</numOfIndEvents>
      <numOfPlantsPerEvent>'||rec.u_num_plants_per_event||'</numOfPlantsPerEvent>
      <molecularQualityEvents>'||rec.u_molecular_quality_events||'</molecularQualityEvents>
      <toField>'||rec.u_field||'</toField>
      <potentialPhenotype>'||rec.u_potential_phenotype||'</potentialPhenotype>
      </Construct>
end loop;
-- complete xml data
v_xml_footer := '
      </entities>
    </exchange>
-- complete submission data
:P36_XML_SUBMISSION := null;
:P36_XML_SUBMISSION := v_xml_info||v_xml_header||v_xml_data||v_xml_footer;
:P36_XML_SUBMISSION := trim(:P36_XML_SUBMISSION);
end;Here is an example of :P36_XML_SUBMISSION:
<?xml version="1.0" encoding="utf-8"?> <exchange xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="deService" xsi:schemaLocation="deService http://mycompany.com/webservices/apexdataexchange/schemas/RTPCATT.xsd"> <header xmlns=""> <stdXmlVer>2.0</stdXmlVer> <sendingUnit>10</sendingUnit> <sendingPerson>Test, Christine</sendingPerson> <notification>[email protected]</notification> <creationDate>2011-12-20</creationDate> </header> <entities xmlns=""> <Construct> <requestBUID>150000123</requestBUID> <requestName>AA0000123</requestName> <cassetteBUID>160000123</cassetteBUID> <cassetteName>AB000123</cassetteName> <scientist>Test, Christine</scientist> <projectNumber>T000123</projectNumber> <subProject>Discovery Plus</subProject> <comments>AA0000123 From CATT on 20-DEC-11 </comments> <nominator>Test, Christine</nominator> <goingToVqc>true</goingToVqc> <primaryTrait>promoter::intron::transit:gene::terminator</primaryTrait> <sourceMatPrvd>seed - stuff</sourceMatPrvd> <prokaryoticResistance></prokaryoticResistance> <vectorType>Plant Vector</vectorType> <priority>Medium</priority> <immediateTrafo>true</immediateTrafo> <newComponent></newComponent> <componentName>gene</componentName> <newComponentDescription>unknown function; sequence has some similarity to others</newComponentDescription> <targetCrop>Crop</targetCrop> <Line>Inbred</Line> <plantSelection>smidge ver2</plantSelection> <numOfIndEvents>6</numOfIndEvents> <numOfPlantsPerEvent>1</numOfPlantsPerEvent> <molecularQualityEvents>NA</molecularQualityEvents> <toField>true</toField> <potentialPhenotype></potentialPhenotype> </Construct> </entities> </exchange>My application page is accessed by an action from another page. The user reviews the data in a sql report region. When the use clicks on the Upload (SUBMIT) button, the xml string is generated first and then the web service is invoked. I have tried passing a simple string as the second parameter ("dummydata") and partial data in the xml string ("<sendingPerson>Test, Christine</sendingPerson>") the web service returns this error in both cases:
Error[Validate Data]: (XML) = Data at the root level is invalid. Line 1, position 1.. Cannot validate the XML! Data Exchange not accepted!Once I pass the entire xml string above, I get an Oracle-01403: no data found error. I have opened the web service in IE and pasted my xml input string and received a valid, verified result, so I am sure that the generated xml is correct. I have spoken with the web service developer; there are no log entries created by the web service when I submit the full xml string, so I suspect the failure is in the Apex application.
Thanks,
Christine
I should add that once I have nested tags in the xml, I get the Oracle no data found error ("<header xmlns=""> <stdXmlVer>2.0</stdXmlVer> <sendingUnit>10</sendingUnit> </header>"). I f I do not have nested tags in the xml ("<notification>[email protected]</notification> <creationDate>2011-12-20</creationDate>"), I get the web service response (error).
Edited by: ChristineD on Dec 20, 2011 9:54 AM

Ok, I think I'm getting closer to thinking this all the way through. When I have used clobs in the past, I've always used the DBMS_CLOB package. I use this to create a temp clob and then make the above calls. I had to go find an example in my own code to remember all of this. So, here is another suggestion... feel free to disregard all the previous code snippets..
declare
cursor build_data is
    select u_catt_request_buid,u_catt_request_name,u_catt_cassette_buid,u_catt_cassette_name
      ,u_project_name,u_sub_project,replace(u_nominator,'ERROR ','') u_nominator
      ,replace(replace(u_going_to_vqc,'Yes','true'),'No','false') u_going_to_vqc
      ,u_promoter,u_cds,u_terminator
      ,u_primary_trait,u_source_mat_prvd,u_pro_resistance_1,u_vector_type
      ,nvl(u_my_priority,'Medium') u_my_priority
      ,replace(replace(u_immediate_trafo,'Yes','true'),'No','false') u_immediate_trafo
      ,replace(replace(u_new_bps_cmpnt,'Yes','true'),'No','false') u_new_bps_cmpnt
      ,u_compnt_name,u_new_cmpt_desc,initcap(u_target_crop) u_target_crop,u_corn_line
      ,u_plant_selection,u_num_of_ind_events,u_num_plants_per_event,u_molecular_quality_events
      ,replace(replace(u_field,'Yes','true'),'No','false') u_field
      ,u_t1_seed_request,u_potential_phenotype,u_submission_date
      ,u_sequence_length,u_trait,u_frst_parent,u_frst_parent_vshare_id,u_cds_vshare_id
      ,constructid,cassetteid,description
    from temp_constructs_lims
    order by constructid,description;
v_xml_info         varchar2(350);
v_xml_header       varchar2(1000);
v_xml_data         clob;
v_xml_footer       varchar2(50);
v_create_date      varchar2(10);
v_scientist_name   v_users.full_name%type;
v_scientist_email v_users.email_address%type;
v_primas_code      construct.fkprimas%type;
v_nominator_name   v_nominators.full_name%type;
v_file_length      number;
v_xml_body    varchar2(32767); --added by AustinJ
v_page_item    varchar2(32767); --added by AustinJ
begin
-- initialize variables
v_create_date := to_char(sysdate,'YYYY-MM-DD');
--v_xml_data := null;   --commented out by AustinJ
dbms_lob.createtemporary( v_xml_data, FALSE, dbms_lob.session ); --added by AustinJ
dbms_lob.open( v_xml_data, dbms_lob.lob_readwrite ); --added by AustinJ
-- get name and email address
begin
    select full_name,email_address
    into v_scientist_name,v_scientist_email
    from v_users
    where ldap_account = :F140_USER_ID;
exception when no_data_found then
    v_scientist_name := '';
    v_scientist_email := '';
    v_scientist_name := 'Test, Christine';
    v_scientist_email := '[email protected]';
end;
-- set up xml file
if :OWNER like '%DEV%' then
    v_xml_info := '
      <?xml version="1.0" encoding="utf-8"?>
      <exchange xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
                xmlns="deService"
                xsi:schemaLocation="deService http://mycompany.com/webservices/apexdataexchange/schemas/RTPCATT.xsd">
else
    v_xml_info := '
      <?xml version="1.0" encoding="utf-8"?>
      <exchange xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
                xmlns="deService"
                xsi:schemaLocation="deService http://mycompanyprod.com/webservices/apexdataexchange/schemas/RTPCATT.xsd">
end if;
-- populate xml header records
v_xml_header := '<header xmlns="">
    <stdXmlVer>2.0</stdXmlVer>
    <sendingUnit>'||:P36_UNIT_NUMBER||'</sendingUnit>
    <sendingPerson>'||v_scientist_name||'</sendingPerson>
    <notification>'||v_scientist_email||'</notification>
    <creationDate>'||v_create_date||'</creationDate>
</header>
<entities xmlns="">
for rec in build_data loop
    begin
      -- get primas code for current construct
      select fkprimas
      into v_primas_code
      from construct
      where constructid = rec.constructid;
    exception when no_data_found then
      v_primas_code := null;
    end;
    begin
      -- get nominator name for current construct
      select full_name
      into v_nominator_name
      from v_nominators
      where nominator_id = rec.u_nominator;
    exception
      when no_data_found then
        v_nominator_name := null;
      when invalid_number then
        v_nominator_name := catt_pkg.full_name_from_user_id(p_user_id => rec.u_nominator);
        v_nominator_name := 'Test, Christine';
    end;
    v_xml_body := '
      <Construct>
      <requestBUID>'||rec.u_catt_request_buid||'</requestBUID>
      <requestName>'||rec.u_catt_request_name||'</requestName>
      <cassetteBUID>'||rec.u_catt_cassette_buid||'</cassetteBUID>
      <cassetteName>'||rec.u_catt_cassette_name||'</cassetteName>
      <scientist>'||v_scientist_name||'</scientist>
      <projectNumber>'||v_primas_code||'</projectNumber>
      <subProject>'||rec.u_sub_project||'</subProject>
      <comments>'||rec.description||'</comments>
      <nominator>'||v_nominator_name||'</nominator>
      <goingToVqc>'||rec.u_going_to_vqc||'</goingToVqc>
      <primaryTrait>'||rec.u_primary_trait||'</primaryTrait>
      <sourceMatPrvd>'||rec.u_source_mat_prvd||'</sourceMatPrvd>
      <prokaryoticResistance>'||rec.u_pro_resistance_1||'</prokaryoticResistance>
      <vectorType>'||rec.u_vector_type||'</vectorType>
      <priority>'||rec.u_my_priority||'</priority>
      <immediateTrafo>'||rec.u_immediate_trafo||'</immediateTrafo>
      <newComponent>'||rec.u_new_bps_cmpnt||'</newComponent>
      <componentName>'||rec.u_compnt_name||'</componentName>
      <newComponentDescription>'||rec.u_new_cmpt_desc||'</newComponentDescription>
      <targetCrop>'||rec.u_target_crop||'</targetCrop>
      <Line>'||rec.u_corn_line||'</Line>
      <plantSelection>'||rec.u_plant_selection||'</plantSelection>
      <numOfIndEvents>'||rec.u_num_of_ind_events||'</numOfIndEvents>
      <numOfPlantsPerEvent>'||rec.u_num_plants_per_event||'</numOfPlantsPerEvent>
      <molecularQualityEvents>'||rec.u_molecular_quality_events||'</molecularQualityEvents>
      <toField>'||rec.u_field||'</toField>
      <potentialPhenotype>'||rec.u_potential_phenotype||'</potentialPhenotype>
      </Construct>
    ';    --modified by AustinJ
    dbms_lob.writeappend( v_xml_data, length(v_xml_body), v_xml_body);   --added by AustinJ
end loop;
-- complete xml data
v_xml_footer := '
      </entities>
    </exchange>
-- complete submission data
v_page_item := null;
v_page_item := v_xml_info||v_xml_header||wwv_flow.do_substitutions(wwv_flow_utilities.clob_to_varchar2(v_xml_data))||v_xml_footer;   --added by AustinJ
:P36_XML_SUBMISSION := trim(v_page_item);   --added by AustinJ
    dbms_lob.close( v_xml_data); --added by AustinJ
    if v_xml_data is not null then
        dbms_lob.freetemporary(v_xml_data);   --added by AustinJ
    end if; --added by AustinJ
end;This code will use the Database to construct your clob and then convert it back to a varchar2 for output to your webservice. This makes more sense to me now and hopefully you can follow what the process is doing.
You don't technically need the two varchar2(36767) variables. I used two for naming convention clarity sake. You could use just one multipurpose variable instead.
If you have any questions, just ask. I'll help if I can.
Austin
Edited by: AustinJ on Dec 20, 2011 12:17 PM
Fixed spelling mistakes.

Passing XMLType Data into oracle stored procedure using JDBC

Hi Friends,
I have requirement where my oracle stored procedure accepts XML file as an input. This XML File is generated in runtime using java, I need to pass that xml file using JDBC to oracle stored procedure. Please let me know the fesibile solution for this problem.
Following are the environment details
JDK Version: 1.6
Oracle: 10g
Server: Tomcat 6.x
Thanks in Advance

user4898687 wrote:
I have requirement where my oracle stored procedure accepts XML file as an input. This XML File is generated in runtime using java, I need to pass that xml file using JDBC to oracle stored procedure. Please let me know the fesibile solution for this problem.As stated - no.
A 'file' is a file system entity. There is no way to pass a 'file' anywhere. Not PL/SQL. Not java.
Now you can pass a file path (a string) in java and to PL/SQL.
Or you can pass xml data (a string) in java and to PL/SQL. For PL/SQL you could use eithe a varchar2, if the xml is rather small, or a blob/clob.

Unable to retrieve CLOB data from oracle

hello I am trying to retreive a clob data from database. I am passing "country" to get "information". after submitting data it is showing SQLException caught: General error .
whatz wrong.? can anybody help?
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.sql.*;
public class ClobTest2 extends HttpServlet{
     public void doGet( HttpServletRequest req, HttpServletResponse res )
          throws ServletException, IOException
               Connection conn = null;
               Statement st = null;
               ResultSet rs = null;
               res.setContentType( "text/html" );
               PrintWriter out = res.getWriter();
               String coun$ = "";
               coun$ = req.getParameter( "coun" );
               try{
                  Class.forName( "sun.jdbc.odbc.JdbcOdbcDriver");
                  conn = DriverManager.getConnection( "jdbc:odbc:clobtester",    "temp", "sol" );
                  st = conn.createStatement();
                  rs = st.executeQuery( "SELECT information FROM testclob WHERE country = '"+coun$+"' ");
                    while( rs.next() )
                     out.println(rs.getClob(1) );
                  catch( ClassNotFoundException e )
                       out.println( "Could not load database driver" + e.getMessage() );
                  catch( SQLException e )
                       out.println("SQLException caught: " + e.getMessage() );
                e.printStackTrace();
               catch( Exception e )
                   System.err.println( "Problem closing the database" );
             try{
                         st.close();
                         conn.close();
                     }catch( Exception e )
                        System.err.println( "Problem closing the database" );
     }

certainly but this problem can go on several
category. and I am the needy one to get the solutionHowever I don't need to answer cross-posted questions. And I don't.

How to pass the data from a input table to RFC data service?

Hi,
I am doing a prototype with VC, I'm wondering how VC pass the data from a table view to a backend data service? For example, I have one RFC in the backend system with a tabel type importing parameter, now I want to pass all the data from an input table view to the RFC, I guess it's possible but I don't know how to do it.
I try to create some events between the input table and data service, but seems there is no a system event can export the whole table to the backend data service.
Thanks for your answer.

Thanks for your answer, I tried the solution 2, I create "Submit" button, and ser the mapping scope to be "All data rows", it only works when I select at least one row, otherwise the data would not be passed.
Another question is I have serveral imported table parameter, for each table I have one "submit" event, I want these tables to be submitted at the same time, but if I click the submit button in one table toolbar, I can only submit the table data which has a submit button clicked, for other tables, the data is not passed, how can I achieve it?
Thanks.

Not able pass the data from component to other component.

Hello All
I am not able pass the data from component to other component.
I have done like this.
1 Main Component (Parent component ) having below two child components.Embeded as used components.
2)     Search Component and Details Component
3)     In the Search Component having buttons, Say : Button u201CXu201D on click of button I am navigating to Details component view through FPM.
4)     When I am clicking above button u201CXu201D raising the event to call the parent   business logic method, there I am getting Structure with values and binded this structure to the node and Mapped this node to the Details component interface node. FYI : I kept the debugging point Structure is having data , I had set static attributes table to node instance.
5)     In the Details component node data is not coming mean empty.
Thanks in Advance.
Br-
CW
Edited by: CarlinWilliams on Jul 4, 2011 9:21 AM

Hi,
When you use input Ext. check that the parent component should not be used as used component in child component.
Only in the parent component the child components should be used as used components and the usage has to be created for the
Child Components and the binding of the Node should be done from comp. controller of parent component to child node
by which you will be able to see double arrow against the node.This should work
Thanks,
Shailaja Ainala.

Can not Load CLOB data 32k to target table

SQL> DESC testmon1 ;
Name Null? Type
FILENAME VARCHAR2(200)
SCANSTARTTIME VARCHAR2(50)
SCANENDTIME VARCHAR2(50)
JOBID VARCHAR2(50)
SCANNAME VARCHAR2(200)
SCANTYPE VARCHAR2(200)
FAULTLINEID VARCHAR2(50)
RISK VARCHAR2(5)
VULNNAME VARCHAR2(2000)
CVE VARCHAR2(200)
DESCRIPTION CLOB
OBSERVATION CLOB
RECOMMENDATION CLOB
SQL> DESC test_target;
Name Null? Type
LOCALID NOT NULL NUMBER
DESCRIPTION NOT NULL CLOB
SCANTYPE NOT NULL VARCHAR2(12)
RISK NOT NULL VARCHAR2(6)
TIMESTAMP NOT NULL DATE
VULNERABILITY_NAME NOT NULL VARCHAR2(2000)
CVE_ID VARCHAR2(200)
BUGTRAQ_ID VARCHAR2(200)
ORIGINAL VARCHAR2(50)
RECOMMEND CLOB
VERSION VARCHAR2(15)
FAMILY VARCHAR2(15)
XREF VARCHAR2(15)
create or replace PROCEDURE proc1 AS
CURSOR C1 IS
SELECT FAULTLINEID,VULNNAME,scanstarttime, risk,
dbms_lob.substr(DESCRIPTION,dbms_lob.getlength(DESCRIPTION),1) "DESCR",dbms_lob.substr(OBSERVATION,dbms_lob.getlength(OBSERVATION),1) "OBS",
dbms_lob.substr(RECOMMENDATION) "REC",CVE
FROM testmon1;
c_rec C1%ROWTYPE;
descobs clob;
FSCAN_VULN_TRANS_REC VULN_TRANSFORM_STG%ROWTYPE;
TIMESTAMP varchar2(50);
riskval varchar2(10);
pCTX PLOG.LOG_CTX := PLOG.init (pSECTION => 'foundscanVuln Procedure',
pLEVEL => PLOG.LDEBUG,
pLOG4J => TRUE,
pLOGTABLE => TRUE,
pOUT_TRANS => TRUE,
pALERT => TRUE,
pTRACE => TRUE,
pDBMS_OUTPUT => TRUE);
amount number;
buffer varchar2(32000);
BEGIN
---INITIALIZE THE LOCATOR FOR CLOB DATA TYPE
select observation into descobs from testmon1 where rownum=1;
OPEN C1;
loop
fetch C1 INTO c_rec;
exit when C1%NOTFOUND;
--LOAD THE DESCRIPTION FIELD FROM CURSOR AND WRITE IT TO THE CLOB LOCATOR descobs.
dbms_lob.Write(descobs,dbms_lob(c_rec.DESCR),1,c_rec.DESCR);
------APPEND THE OBSERVATION FIELD FROM CURSOR TO THE CLOB LOCATOR descobs.
dbms_lob.Writeappend(descobs,dbms_lob(c_rec.DESCR),c_rec.OBS);
-- dbms_output.put_line ('the timestamp is :'||c_rec.scanstarttime);
--dbms_lob.write(descobs,amount,1,buffer);
descobs:=c_rec.OBS;
--dbms_lob.read(descobs,amount,1,buffer);
--dbms_lob.append(c_rec.DESCR,c_rec.OBS);
--descobs:=c_rec.OBS;
--dbms_output.put_line ('the ADDED DESCROBS is :'||dbms_lob.substr(c_rec.DESCR,dbms_lob.getlength(c_rec.DESCR),1));
dbms_output.put_line ('the ADDED DESCRIPTION AND OBSERVATION is :'||descobs);
--dbms_output.put_line ('the DESCROBS buffer is :'||buffer);
SELECT DESCRIPTION INTO FSCAN_VULN_TRANS_REC.DESCRIPTION
FROM TESTMON1 WHERE ROWNUM=1;
---------LOAD THE DESCRIPTION+ observation value into the target table description
DBMS_LOB.WRITE(FSCAN_VULN_TRANS_REC.DESCRIPTION, dbms_lob.getlength(descobs),1,descobs);
TIMESTAMP:=substr(c_rec.scanstarttime,1,10)||' '|| substr(c_rec.scanstarttime,12,8);
IF c_rec.risk <3
THEN riskval:='Low';
ELSIF c_rec.risk <6
THEN riskval:='Medium';
ELSIF c_rec.risk <10
THEN riskval:='High';
END IF;
FSCAN_VULN_TRANS_REC.TIMESTAMP:=TO_DATE(TIMESTAMP, 'YYYY/MM/DD HH24:MI:SS');
FSCAN_VULN_TRANS_REC.risk:= riskval;
--dbms_lob.append(c_rec.DESCR,c_rec.OBS);
FSCAN_VULN_TRANS_REC.DESCRIPTION:=c_rec.DESCR;
FSCAN_VULN_TRANS_REC.RECOMMEND:=c_rec.REC;
FSCAN_VULN_TRANS_REC.LocalID:=to_number(c_rec.FAULTLINEID);
FSCAN_VULN_TRANS_REC.SCANTYPE:='FOUNDSCAN';
FSCAN_VULN_TRANS_REC.CVE_ID:=c_rec.CVE;
FSCAN_VULN_TRANS_REC.VULNERABILITY_NAME:=c_rec.VULNNAME;
-- dbms_output.put_line ('the plog timestamp is :'||timestamp);
-- dbms_output.put_line ('the timestamp is :'||riskval);
--dbms_output.put_line ('the recommend is :'||FSCAN_VULN_TRANS_REC.RECOMMEND);
--dbms_output.put_line ('the app desc is :'||FSCAN_VULN_TRANS_REC.DESCRIPTION);
insert into test_target values FSCAN_VULN_TRANS_REC;
End loop;
close C1;
commit;
EXCEPTION
WHEN OTHERS THEN
-- dbms_output.put_line ('Data not found');
-----------dbms_output.put_line (sqlcode|| ':'||sqlerrm);
end proc1;
using dbms_lob package is not helping. Either DB stops responding. Or the Observation field ( which has max length >300000) can not be loaed into a CLOB variable.
Please help or give me a sample code that helps.

select
     BANKING_INSTITUTION.BANK_REF_CODE     C1_BANK_ID,
     BANKING_INSTITUTION.NAME_BANK     C2_BANK_NAME,
     BANKING_INSTITUTION.BANK_NUMBER     C3_BANK_NUMBER,
     BANKING_INSTITUTION.ISO_CODE     C4_GBA_CODE,
     BANKING_INSTITUTION.STATUS     C5_STATUS,
     BANKING_INSTITUTION.SOURCE     C6_SOURCE,
     BANKING_INSTITUTION.START_DATE_BANK     C7_START_DATE,
     BANKING_INSTITUTION.ADDRESS_BANK     C8_BANK_ADDRESS1
from     REF_DATA_DB.BANKING_INSTITUTION BANKING_INSTITUTION
where     (1=1)
insert /*+ append */ into XXSVB.C$_0XXSVB_BANKS_STAGING
     C1_BANK_ID,
     C2_BANK_NAME,
     C3_BANK_NUMBER,
     C4_GBA_CODE,
     C5_STATUS,
     C6_SOURCE,
     C7_START_DATE,
     C8_BANK_ADDRESS1
values
     :C1_BANK_ID,
     :C2_BANK_NAME,
     :C3_BANK_NUMBER,
     :C4_GBA_CODE,
     :C5_STATUS,
     :C6_SOURCE,
     :C7_START_DATE,
     :C8_BANK_ADDRESS1
)

BLOB and CLOB data in BI Publisher

Hello,
I have an XML file with blob and clob data in it. I am using BI desktop publisher to load the xml file and create the rtf template. I am getting the following error:
ConfFile: C:\Program Files\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\config\xdoconfig.xml
Font Dir: C:\Program Files\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\fonts
Run XDO Start
Template: C:\work\employee.rtf
RTFProcessor setLocale: en-us
FOProcessor setData: C:\work\employee.xml
FOProcessor setLocale: en-us
Do i need to install anything or am i missing any configuration to read the blob and clob? Please advise
thanks

Check this out, hopefully it'll help you
http://oraclebizint.wordpress.com/2007/11/12/oracle-bi-ee-101332-working-with-clob-fields/
Fiston

The ADO NET Source was unable to process the data. ORA-64203: Destination buffer too small to hold CLOB data after character set conversion.

We developed a SSIS Package to pull the data From Oracle source to Sql Server 2012. Here we used ADO.Net source to pull the records from Source but getting the below error after pulling some 40K records.
[ADO NET Source [2]] Error: The ADO NET Source was unable to process the data. ORA-64203: Destination buffer too small to hold CLOB data after character set conversion.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.
The PrimeOutput method on ADO NET Source returned error code 0xC02090F5.
The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component,
but the error is fatal and the pipeline stopped executing.
There may be error messages posted before this with more
information about the failure.
Anything that we can do to fix this?

Hi,
Tried both....
* Having schema type as Nvarchar(max). - Getting the same error.
* Instead of ADO.Net Source used OLEDB Source with driver as " Oracle Provide for OLE DB" Getting error as below.
[OLE DB Source [478]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on OLE DB Source returned error code 0xC0202009. The component returned a failure
code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the
failure.
Additional Info:
* Here the Source task is getting failed not the conversion or destination task.
Thanks,
Loganathan A.

How to pass a date parameter(from a procedure IN) to a API

Hi,
CREATE OR REPLACE package body xxal_basic_sal_increment_pkg1 as
procedure emp_pro_inc1(ERRBUF VARCHAR2,RETCODE OUT NUMBER,
p_business_group_id_enter in number,p_change_date in varchar2) is
CURSOR STAFF IS
SELECT pp.ASSIGNMENT_ID
,peo.EMPLOYEE_NUMBER employee_no
,pp.OBJECT_VERSION_NUMBER
,pp.PAY_PROPOSAL_ID
,pp.PROPOSED_SALARY_N basic_salary
,pp.PROPOSAL_REASON
,pp.change_date
,pp.BUSINESS_GROUP_ID
,pg.name
,pr.PERFORMANCE_RATING,
'' v_effective_start_date,
'' v_effective_end_date
FROM per_all_people_f peo,
per_all_assignments_f pa,
per_pay_proposals pp,
per_grades_tl pg,
per_performance_reviews_v pr
where pa.person_id = peo.PERSON_ID
and pa.ASSIGNMENT_ID = pp.ASSIGNMENT_ID
and peo.PERSON_ID=pr.PERSON_ID
and pg.GRADE_ID=pa.GRADE_ID
--and peo.EMPLOYEE_NUMBER=STAFF_VAR.employee_no
and sysdate between peo.EFFECTIVE_START_DATE and peo.EFFECTIVE_END_DATE
and sysdate between pa.EFFECTIVE_START_DATE and pa.EFFECTIVE_END_DATE
and peo.BUSINESS_GROUP_ID = p_business_group_id_enter
and pp.change_DATE = (select max(change_DATE) from per_pay_proposals temp
where ASSIGNMENT_ID =pp.ASSIGNMENT_ID);
--L_BUSINESS_GROUP_ID NUMBER:=5128;
L_ASSIGNMENT_ID NUMBER;
L_PAY_PROPOSAL_ID NUMBER;
L_OBJECT_VERSION_NUMBER NUMBER;
L_pyp_proposed_sal_warning BOOLEAN;
L_additional_comp_warning boolean;
l_person_id number;
L_COMMON boolean;
L_ELEMENT_ENTRY_ID NUMBER;
TEMP NUMBER;
L_EFFECTIVE_START_DATE DATE;
L_MULTI VARCHAR2(30):='N';
L_APPROVED VARCHAR2(30):='Y';
L_CHANGE_DATE DATE:=TO_DATE('31-JAN-2008','DD-MON-YYYY');
BEGIN
v_disp_output:='EMPLOYEE_NUMBER'||','||
'BASIC'||','||
'EFF START DATE'||','||
'EFF END DATE';
fnd_file.put_line(FND_FILE.output,v_disp_output);
FOR STAFF_VAR IN STAFF LOOP
L_ELEMENT_ENTRY_ID:=null;
begin
select assign.assignment_id,assign.effective_start_date into
l_assignment_id,l_change_date_new
from per_people_f peo,per_assignments_f assign
where peo.person_id=assign.person_id
and sysdate between peo.effective_start_date and peo.effective_end_date
and sysdate between assign.effective_start_date and assign.effective_end_date
and current_employee_flag='Y'
and primary_flag='Y'
and peo.business_group_id=l_business_group_id
and peo.employee_number=staff_var.employee_no;
L_CHANGE_DATE_new:=L_CHANGE_DATE;
--L_CHANGE_DATE_new:=STAFF_VAR.v_effective_start_date;
begin
HR_MAINTAIN_PROPOSAL_API.INSERT_SALARY_PROPOSAL
P_PAY_PROPOSAL_ID=>L_PAY_PROPOSAL_ID
,P_ASSIGNMENT_ID=>staff_var.ASSIGNMENT_ID
,P_BUSINESS_GROUP_ID=>staff_var.BUSINESS_GROUP_ID
,P_CHANGE_DATE=>L_CHANGE_DATE_new
,P_PROPOSED_SALARY_N=>STAFF_VAR.basic_salary
,P_OBJECT_VERSION_NUMBER=>STAFF_VAR.OBJECT_VERSION_NUMBER
,p_multiple_components=>L_MULTI
,p_approved=>L_APPROVED
,P_VALIDATE=>false
,p_element_entry_id =>L_ELEMENT_ENTRY_ID
,P_INV_NEXT_SAL_DATE_WARNING=>l_common
,P_PROPOSED_SALARY_WARNING=>L_COMMON
,P_APPROVED_WARNING=>L_COMMON
,P_PAYROLL_WARNING=>L_COMMON
in the above code the variable L_CHANGE_DATE DATE is hard coded .
but we need to supply this variable value as dynamic, means (p_change date--procedure IN Parameter )
i tried like below ,
CREATE OR REPLACE package body xxal_basic_sal_increment_pkg1 as
procedure emp_pro_inc1(ERRBUF VARCHAR2,RETCODE OUT NUMBER,
p_business_group_id_enter in number,p_change_date in varchar2) is
CURSOR STAFF IS
SELECT pp.ASSIGNMENT_ID
,peo.EMPLOYEE_NUMBER employee_no
,pp.OBJECT_VERSION_NUMBER
,pp.PAY_PROPOSAL_ID
,pp.PROPOSED_SALARY_N basic_salary
,pp.PROPOSAL_REASON
,pp.change_date
,pp.BUSINESS_GROUP_ID
,pg.name
,pr.PERFORMANCE_RATING,
'' v_effective_start_date,
'' v_effective_end_date
FROM per_all_people_f peo,
per_all_assignments_f pa,
per_pay_proposals pp,
per_grades_tl pg,
per_performance_reviews_v pr
where pa.person_id = peo.PERSON_ID
and pa.ASSIGNMENT_ID = pp.ASSIGNMENT_ID
and peo.PERSON_ID=pr.PERSON_ID
and pg.GRADE_ID=pa.GRADE_ID
--and peo.EMPLOYEE_NUMBER=STAFF_VAR.employee_no
and sysdate between peo.EFFECTIVE_START_DATE and peo.EFFECTIVE_END_DATE
and sysdate between pa.EFFECTIVE_START_DATE and pa.EFFECTIVE_END_DATE
and peo.BUSINESS_GROUP_ID = p_business_group_id_enter
and pp.change_DATE = (select max(change_DATE) from per_pay_proposals temp
where ASSIGNMENT_ID =pp.ASSIGNMENT_ID);
--L_BUSINESS_GROUP_ID NUMBER:=5128;
L_ASSIGNMENT_ID NUMBER;
L_PAY_PROPOSAL_ID NUMBER;
L_OBJECT_VERSION_NUMBER NUMBER;
L_pyp_proposed_sal_warning BOOLEAN;
L_additional_comp_warning boolean;
l_person_id number;
L_COMMON boolean;
L_ELEMENT_ENTRY_ID NUMBER;
TEMP NUMBER;
L_EFFECTIVE_START_DATE DATE;
L_MULTI VARCHAR2(30):='N';
L_APPROVED VARCHAR2(30):='Y';
L_CHANGE_DATE DATE:=TO_DATE(p_change_date,'DD-MON-YYYY');
BEGIN
v_disp_output:='EMPLOYEE_NUMBER'||','||
'BASIC'||','||
'EFF START DATE'||','||
'EFF END DATE';
fnd_file.put_line(FND_FILE.output,v_disp_output);
FOR STAFF_VAR IN STAFF LOOP
L_ELEMENT_ENTRY_ID:=null;
begin
select assign.assignment_id,assign.effective_start_date into
l_assignment_id,l_change_date_new
from per_people_f peo,per_assignments_f assign
where peo.person_id=assign.person_id
and sysdate between peo.effective_start_date and peo.effective_end_date
and sysdate between assign.effective_start_date and assign.effective_end_date
and current_employee_flag='Y'
and primary_flag='Y'
and peo.business_group_id=l_business_group_id
and peo.employee_number=staff_var.employee_no;
L_CHANGE_DATE_new:=L_CHANGE_DATE;
--L_CHANGE_DATE_new:=STAFF_VAR.v_effective_start_date;
begin
HR_MAINTAIN_PROPOSAL_API.INSERT_SALARY_PROPOSAL
P_PAY_PROPOSAL_ID=>L_PAY_PROPOSAL_ID
,P_ASSIGNMENT_ID=>staff_var.ASSIGNMENT_ID
,P_BUSINESS_GROUP_ID=>staff_var.BUSINESS_GROUP_ID
,P_CHANGE_DATE=>L_CHANGE_DATE_new
,P_PROPOSED_SALARY_N=>STAFF_VAR.basic_salary
,P_OBJECT_VERSION_NUMBER=>STAFF_VAR.OBJECT_VERSION_NUMBER
,p_multiple_components=>L_MULTI
,p_approved=>L_APPROVED
,P_VALIDATE=>false
,p_element_entry_id =>L_ELEMENT_ENTRY_ID
,P_INV_NEXT_SAL_DATE_WARNING=>l_common
,P_PROPOSED_SALARY_WARNING=>L_COMMON
,P_APPROVED_WARNING=>L_COMMON
,P_PAYROLL_WARNING=>L_COMMON
but we are getting the error Cause: FDPSTP failed due to ORA-01839: date not valid for month specified
ORA-06512: at "APPS.XXAL_BASIC_SAL_INCREMENT_PKG1", line 45
ORA-06512: at line 1
we tried the solution available in the metalink still its giving error ..
pl help us to solve this issue ...
how should we pass the date parameter while we run the concurrent program(we used date value set).
also we tried with some other value set also ..
Regards,
kumar

dear,
I have the following code to create proposal, but the API create salary proposal for all record s and does not create entry for all records it just creates for the first record
any advice
the code ....
/* Formatted on 2007/08/29 16:20 (Formatter Plus v4.8.8) */
----------------------- P R O P O S A L -------------------------
DECLARE
l_rows_processed NUMBER := 0;
l_commit_point NUMBER := 500;
l_business_group_id NUMBER
:= fnd_profile.VALUE ('PER_BUSINESS_GROUP_ID');
l_proposal_salry NUMBER;
l_approved CHAR (1);
l_rowid VARCHAR2 (30);
l_errmessage VARCHAR2 (400);
l_entry_indecator NUMBER;
l_assignment_id NUMBER;
p_ctr_object_version_number NUMBER;
-- Out Parameters --
l_element_entry_id NUMBER;
p_element_entry_id NUMBER;
l_ctr_object_version_number NUMBER;
l_pay_proposal_id NUMBER;
l_inv_next_sal_date_warning BOOLEAN;
l_proposed_salary_warning BOOLEAN;
l_approved_warning BOOLEAN;
l_payroll_warning BOOLEAN;
CURSOR crs_dc_mn
IS
SELECT xdp.ROWID, xdp.assignment_id, xdp.change_date,
xdp.proposal_reason, xdp.proposed_salary,
xdp.assignment_number, xdp.employee_number, xdp.person_id,
xdp.new_asg_id
FROM apps.xx_dc_proposal xdp
WHERE xdp.assignment_id <> -1
AND xdp.processed = 'N'
AND xdp.change_date =
(SELECT MIN (xdc.change_date)
FROM xx_dc_proposal xdc
WHERE xdc.assignment_id = xdp.assignment_id
AND xdc.processed = 'N')
ORDER BY assignment_id, change_date ASC;
pro_rcrd crs_dc_mn%ROWTYPE;
CURSOR crs_dc_proposal1 (p_asg_id IN NUMBER)
IS
SELECT xdp.ROWID, xdp.assignment_id, xdp.change_date,
xdp.proposal_reason, xdp.proposed_salary,
xdp.assignment_number, xdp.employee_number, xdp.person_id,
xdp.new_asg_id
FROM apps.xx_dc_proposal xdp
WHERE xdp.assignment_id <> -1
AND xdp.processed = 'N'
AND xdp.assignment_id = p_asg_id
ORDER BY assignment_id, change_date ASC;
BEGIN
OPEN crs_dc_mn;
FETCH crs_dc_mn
INTO pro_rcrd;
LOOP
BEGIN
hr_maintain_proposal_api.insert_salary_proposal
(p_pay_proposal_id => l_pay_proposal_id,
p_assignment_id => pro_rcrd.assignment_id,
p_business_group_id => l_business_group_id,
p_change_date => pro_rcrd.change_date,
p_comments => NULL,
p_next_sal_review_date => NULL,
p_proposal_reason => NULL,
p_proposed_salary_n => pro_rcrd.proposed_salary,
p_forced_ranking => NULL,
p_performance_review_id => NULL,
p_attribute_category => NULL,
p_attribute1 => NULL,
p_attribute2 => NULL,
p_attribute3 => NULL,
p_attribute4 => NULL,
p_attribute5 => NULL,
p_attribute6 => NULL,
p_attribute7 => NULL,
p_attribute8 => NULL,
p_attribute9 => NULL,
p_attribute10 => NULL,
p_attribute11 => NULL,
p_attribute12 => NULL,
p_attribute13 => NULL,
p_attribute14 => NULL,
p_attribute15 => NULL,
p_attribute16 => NULL,
p_attribute17 => NULL,
p_attribute18 => NULL,
p_attribute19 => NULL,
p_attribute20 => NULL,
p_object_version_number => l_ctr_object_version_number,
p_multiple_components => 'N', -- 918219
p_approved => 'Y',
p_validate => FALSE,
p_element_entry_id => l_element_entry_id,
p_inv_next_sal_date_warning => l_inv_next_sal_date_warning,
p_proposed_salary_warning => l_proposed_salary_warning,
p_approved_warning => l_approved_warning,
p_payroll_warning => l_payroll_warning
UPDATE xx_dc_proposal
SET processed = 'Y'
WHERE ROWID = pro_rcrd.ROWID;
l_rows_processed := l_rows_processed + 1;
IF l_rows_processed = l_commit_point
THEN
COMMIT;
l_rows_processed := 0;
END IF;
EXCEPTION
WHEN OTHERS
THEN
l_errmessage := SQLERRM;
UPDATE xx_dc_proposal
SET err_message = l_errmessage
WHERE ROWID = pro_rcrd.ROWID;
END;
END LOOP;
CLOSE crs_dc_mn;
COMMIT;
END;
..............................

How to pass a date parameter from report builder query designer to oracle database

i'm using report builder 3.0 connected to oracle database. i'm trying to pass a date parameter in the query with no success, i don't
know the exact syntax. I've tried :
SELECT * FROM igeneral.GCL_CLAIMS where CREATED_BY IN (:CREATED_BY) AND CLAIM_YEAR IN(:UW_YEAR) AND (LOSS_DATE) >To_Date('01/01/2014','mm/dd/yyyy')
it worked perfectly.
However if i try to put a date parameter "From" instead of 01/01/2014 it will not work, a Define Query Parameter popup window appear and error occurred after i fill
the values (usually i shouldnt get this popup i should enter the value when i run the report)
SELECT * FROM igeneral.GCL_CLAIMS where CREATED_BY IN (:CREATED_BY) AND CLAIM_YEAR IN(:UW_YEAR) AND (LOSS_DATE) >To_Date(:From,'mm/dd/yyyy')
appreciate your assistance

Hi Gorgo,
According to your description, you have problem when in passing a parameter for running a Oracle Query. Right?
Based on my knowledge, it use "&" as synax for parameter in Oracle, like we use "@" in SQL Server. In this scenario, maybe you can try '01/01/2014' when inputing in "From". We are not sure if there's any limitation for To_Date()
function. For your self-testing, you can try the query in sqlplus/sql delveloper. Since your issue is related to Oracle query, we suggest you post this thread onto Oracle forum.
Best Regards,
Simon Hou

Passing table data to pl sql procedure oaf

Hi All,
I have a requirement where i have to pass table data to plsql procedure.
In the first page i select the REQUISITION and click on RETURN button and it will take me to the next page.
and in the Next page i will click on APPLY button.
When i click on APPLY, it will call the procedure and will give input to the procedure whatever has been selected when i have selected requisition.
Please help. Please tell me the approach how to get this task done. A sample code will work.
Hope the requirement is clear.
Thanks in Advance.

Hi Chinmay,
Refer below code for Your Requirement.
//Code For Quering Data
import java.sql.PreparedStatement;
import java.sql.ResultSet;
Connection conn = pageContext.getApplicationModule(webBean).getOADBTransaction().getJdbcConnection();
String Query = "SELECT organization_id FROM hr_operating_units WHERE organization_id = fnd_global.org_id";
PreparedStatement stmt = conn.prepareStatement(Query);
resultset=stmt.executeQuery();
while (resultset.next())
orgId = (String)resultset.getString("ORGANIZATION_ID").toString();
conn.commit();
catch(Exception e)
e.printStackTrace();
//Code for Pass Resulted column to Procedure Input for delete Particular Record
Execute parameterized PL SQL procedure from OAF page
Let us try to call PL/SQL package from OAF page. We will try to remove selected line from Database.
Package Spec
CREATE OR REPLACE PACKAGE APPS.genpack_pkg
AS
PROCEDURE roll_delete_proc (orgId IN VARCHAR2);
END genpack_pkg;
Package Body
CREATE OR REPLACE PACKAGE BODY APPS.genpack_pkg
AS
PROCEDURE roll_delete_proc (orgId IN VARCHAR2)
AS
BEGIN
DELETE FROM pklist_roll_details_temp
WHERE roll_line_id = orgId;
COMMIT;
END roll_delete_proc;
END genpack_pkg;
//in Controller PFR
import java.sql.CallableStatement;
if (pageContext.getParameter("ActionsButton") != null)
String val = pageContext.getParameter("ActionsChoice");
if ("DELLN".equals(val))
CallableStatement cstmt = null;
for (OAViewRowImpl row = (OAViewRowImpl)tempvo.first(); row != null; row = (OAViewRowImpl)tempvo.next()) {
if ((row.getAttribute("Selectflag") == null) ||
(!row.getAttribute("Selectflag").toString().equals("Y"))) continue;
try {
int rollid = Integer.parseInt((String)row.getAttribute("orgId"));
Connection conn = am.getOADBTransaction().getJdbcConnection();
if (rollid == 1)
temphm.put(row.getAttribute("orgId").toString(), row.getAttribute("PoNumber").orgId());
tempvo.removeCurrentRow();
else
try
StringBuilder sb = new StringBuilder();
sb.append(rollid);
String strI = sb.toString();
System.out.println("Inside else in delete");
cstmt = conn.prepareCall("{call GENPACK_PKG.tpc_roll_delete_proc(?)}");
cstmt.setString(1, strI);
System.out.println("Oracle Callable Statment Execution Init for Delete");
cstmt.execute();
catch (SQLException e) {
throw new OAException(e.toString(), (byte)0);
}tempvo.removeCurrentRow();
catch (OAException e) {
throw new OAException("No row selected", (byte)3);
Thanks,
Dilip

How do you pass the data from a SBO process to a crystal report laout

Hi Everyone
Can someone please assist or direct me to documentation that could be of help.
I do production orders in SBO.
I have a crystal report that I have imported as a layout to print these production orders.
The report was developed the normal way, linking to the tables and returning data(all data for all production orders ever done)
The production print option is set to make use of this layout.
What I would like to see is that when I create production order 12345 and click on print preview I get the data of the mentioned order only displayed in my crystal layout(that is set to default)
What I get however is all the data from the tables.
Where am I going wrong. With my design already or is there a different way to pass the data to my report/layout direct from my SBO production order screen
This is quite urgen
Regards
Burger

Hi All
The solution i was looking for is:
In Crystal create the parameter called DocKey@
This is recognized by sap and the active document number is passed to the report layout.
In crystal itself also do a filter {<Table>.<Column Name>} = {?DocKey}
So simple once you know how.
Hope this help someone else that is as stuck as I was.
Regards
Burger

Problem in using CLOB Data from a Data and exporting into File

Hi,
UTL_FILE Error Occured while using UTL_FILE with CLOB Data.
UTL_FILE: A write error occurred.
The Below Code is for reference:
DECLARE
C_AMOUNT CONSTANT BINARY_INTEGER := 32767;
L_BUFFER VARCHAR2(32767);
L_CHR10 PLS_INTEGER;
L_CLOBLEN PLS_INTEGER;
L_FHANDLER UTL_FILE.FILE_TYPE;
L_POS PLS_INTEGER := 1;
BEGIN
     FILE_NAME:=UTL_FILE.FOPEN('EXPORT_DIR','EXPORT_FILE'||'.sql','W');
     FOR C1_EXP IN (SELECT INSERT_STRING FROM EXPORTED_DUMP) LOOP
     L_CLOBLEN := DBMS_LOB.GETLENGTH(C1_EXP.INSERT_STRING);
     DBMS_OUTPUT.PUT_LINE('THE CLOB LEN '||L_CLOBLEN);
     DBMS_OUTPUT.PUT_LINE('THE POSITION '||L_POS);
     WHILE L_POS < L_CLOBLEN LOOP
L_BUFFER := DBMS_LOB.SUBSTR(C1_EXP.INSERT_STRING, C_AMOUNT, L_POS);
     DBMS_OUTPUT.PUT_LINE('THE BUFFER IS '||L_BUFFER);
EXIT WHEN L_BUFFER IS NULL;
UTL_FILE.PUT_LINE(FILE_NAME, C1_EXP.INSERT_STRING);
L_POS := L_POS + LEAST(LENGTH(L_BUFFER)+1,c_amount);
END LOOP;
     END LOOP;
UTL_FILE.FCLOSE(FILE_NAME);
EXCEPTION
WHEN UTL_FILE.INTERNAL_ERROR THEN
DBMS_OUTPUT.PUT_LINE ('UTL_FILE: An internal error occurred.');
UTL_FILE.FCLOSE_ALL;
WHEN UTL_FILE.INVALID_FILEHANDLE THEN
DBMS_OUTPUT.PUT_LINE ('UTL_FILE: The file handle was invalid.');
UTL_FILE.FCLOSE_ALL;
WHEN UTL_FILE.INVALID_MODE THEN
DBMS_OUTPUT.PUT_LINE ('UTL_FILE: An invalid open mode was given.');
UTL_FILE.FCLOSE_ALL;
WHEN UTL_FILE.INVALID_OPERATION THEN
DBMS_OUTPUT.PUT_LINE ('UTL_FILE: An invalid operation was attempted.');
UTL_FILE.FCLOSE_ALL;
WHEN UTL_FILE.INVALID_PATH THEN
DBMS_OUTPUT.PUT_LINE ('UTL_FILE: An invalid path was give for the file.');
UTL_FILE.FCLOSE_ALL;
WHEN UTL_FILE.READ_ERROR THEN
DBMS_OUTPUT.PUT_LINE ('UTL_FILE: A read error occurred.');
UTL_FILE.FCLOSE_ALL;
WHEN UTL_FILE.WRITE_ERROR THEN
DBMS_OUTPUT.PUT_LINE ('UTL_FILE: A write error occurred.');
UTL_FILE.FCLOSE_ALL;
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE ('Some other error occurred.');
UTL_FILE.FCLOSE_ALL;
END;

Hi user598986!
OK, I understood that there is a problem with your code. But please would you be so kindly to tell us here what error exactly happens (the errormessage). Mabay after that someone will be able to help you.
yours sincerely
Florian W.
P.S. If you enclose your code into tags it will be shown formated.

How can you SELECT via Database Link CLOB data using Application Express?

Customer Issue:
Developer using Oracle's Application Express 3.1. The Developer is trying to SELECT a CLOB datatype column from a remote (10.2.0.3) database, via a database link on her 10.2.0.4 based client Application. The Developer wants to be able to select CLOB data from the remote database which has limitation that she can't make any changes to the remote database.
Developer's Comments:
I do a select and get the error. Getting error ORA-22992: cannot use LOB locators selected from remote tables. So she feels she can't use dbms_lob.substr in this configuration I can do a "select into" but that is for one value. I am trying to run a select statement for a report that brings back more than one row. I do not have permission to change anything on the remote database. I want to access the remote database and multiple tables.
This is not something I work with, would greatly appreciate help or ideas. Is this a limitation of the 3.1; or does she just not have this set up correctly; or should she be using a Collection (if yes, please share example)
Thanks very much,
Pam
Edited by: pmoutrie on Jun 4, 2009 12:01 PM
Hello???
Would really appreciate an answer.
Thanks,
Pam

This may not be a perfect solution for you but it worked for my situation.
I wanted to grab some data from Grid Control's MGMT$JOB_STEP_HISTORY table but I couldnt' create an Interactive Report due to the existance of a CLOB column. I cheated this by creating a view on the GC DB, grabbing the first 4000 characters and turning it into a varchar2 column:
create view test_job_step_history as
select job_Name, target_name, status, start_time, end_time, to_char(substr(output,1,4000)) output
from MGMT$JOB_STEP_HISTORY where trunc(end_time) > trunc(sysdate)-90
In an APEX Interactive Report:
select * from test_job_step_history@GCDB
Granted, the output looks aweful right now but I am only looking for a very particular output (failed, denied, ORA-, RMAN-, etc) so the formatting isn't the most important thing to me right now.
If anyone can improve -- and I'm sure you can -- on this I'd love to hear about it.
Thanks,
Rich

Pass clob data

Similar Messages

Maybe you are looking for