Pass exit code from batch file to MDT 2012?

So i have batch file that creates some directories, sets up the path for log files before i install an application ( msi installer).
It goes something like this :
MD C:\mylogfolders
Set logfilename = C:\mylogfolders\appl1-date.log
msiexec /i app1.msi /qb REBOOT="ReallySuppress" /l*e "%logfilename%"
exit /B %errorlevel%
This batch file was imported into MDT along with the msi files, and the silent command is running this batch file.
The installation works fine, the log produced also indicates it is successfully installed, with error code 0. I double confirmed the errorlevel variable is 0 by echoing it.
But at the summary pane, it always shows warning with error code 255 for this application. Is there any other way to pass the error code to MDT??

The "exit /B %errorlevel%" line seems redundant. Why have the last line return the errorcode from the previous line?
if this is an application run though ZTIApplications I would use the following:
msiexec.exe /q app1.msi /qb reboot=ReallySuppress /l*e %logpath%\app1.msi
http://keithga.wordpress.com/2013/09/04/application-installation-and-packaging-via-mdt-and-sccm/
Keith Garner - keithga.wordpress.com

Similar Messages

Running the Java Code from Batch File

Hi All,
I have run a code sucessfully in Eclipse and it uses Logging API from Java
When i try running the same program from batch file it throws error
java.io.IOException: Couldn't get lock for log\Properties_Log_16Sep2009_150229
at java.util.logging.FileHandler.openFiles(Unknown Source)
at java.util.logging.FileHandler.<init>(Unknown Source)
at com.adidas.SPM.LogMessage.<init>(LogMessage.java:26)
at com.adidas.SPM.MainApplication.initialize(MainApplication.java:51)
at com.adidas.SPM.MainApplication.main(MainApplication.java:102)
I am working on a windows systems the folder log has all the permission i have provided with all
Not sure why the code runs like this
The batch file is like below
set CURR_DIR=%CD%
cd %CURR_DIR%\bin
%CURR_DIR%\jre6\bin\java -classpath .;%CURR_DIR%\lib\FirstProject.jar com.test.MainApplication
echo %ERRORLEVEL% The Error Level
echo SUCCESS
GOTO END
:END
pause
Rgds
Aditya

Vikash.SunJava wrote:
According to me the problem is that there are many instances trying to access the same property file. Nothing wrong with that since they only are reading it.
The best way to do is that create a schedular in Windows that runs at some predefined interval (say 1 minute).Huh?
>
What will happen is if your program runs for more than a minute even then the new process will not start until old process is autaomatically killed. Please do not check this option if you want the program to exit normally.
If the Task is still running stop at this time
O_o

I need to call a batch file from java and pass arguments to that Batch file

Hi,
I need to call a batch file from java and pass arguments to that Batch file.
For example say: The batch file(test.bat) contains this command: mkdir
I need to pass the name of the directory to the batch file as an argument from My Java program.
Runtime.getRuntime().exec("cmd /c start test.bat");
How to pass argument to the .bat file from Java now ?
regards,
Krish
Edited by: Krish4Java on Oct 17, 2007 2:47 PM

Hi Turing,
I am able to pass the argument directly but unable to pass as a String.
For example:
Runtime.getRuntime().exec("cmd /c start test.bat sample ");
When I pass it as a value sample, I am able to receive this value sample in the batch file. Do you know how to pass a String ?
String s1="sample";
Runtime.getRuntime().exec("cmd /c start test.bat s1 ");
s1 gets passed here instead of value sample to the batch file.
Pls let me know if you have a solution.
Thanks,
Krish

ORA-27369: job of type EXECUTABLE failed with exit code: No such file or directory

Hi,
I am using the scheduler to take backup of the dev database and it was working fine. Then I added notification to the scripts and then the scheduler started failing with the following code .
BEGIN dbms_scheduler.run_job('BACKUP_DEV'); END;
ERROR at line 1:
ORA-27369: job of type EXECUTABLE failed with exit code: No such file or
directory
ORA-06512: at "SYS.DBMS_ISCHED", line 150
ORA-06512: at "SYS.DBMS_SCHEDULER", line 441
ORA-06512: at line 1
Here' the original which has no issues
#!/bin/bash -x
echo $@
if [ -z "$ORACLE_HOME" ]; then
source /path/oracle/.bash_profile
fi
RMAN="${ORACLE_HOME}/bin/rman";
${RMAN} $@
exit $?
And here's the one which gives me the errors. Also if I run this script from command line it works perfectly fine
#!/bin/bash -x
echo $@
if [ -z "$ORACLE_HOME" ]; then
source /path/oracle/.bash_profile
fi
RMAN="${ORACLE_HOME}/bin/rman";
exec >> temp_log
${RMAN} $@
/usr/bin/mailx -s "Backup status of $ORACLE_SID " [email protected] < temp_log
/usr/bin/rm temp_log
exit $?
Pls let me know what could be the reason that the script fails with the scheduler.

Hi,
The user oracle who owns the scheduler already has permissions for the mailx and the same script is able to send notifications when run manully. Do I need to set additional permissions for scheduler ?
Also the db version is 10.2.0.5.
Thanks

Exit codes from PowerBuilder executable in Redwood

We are currently in the process of Integration Testing for SAP Go-Live planned for March 31, 2008. Our Integration Testing is being done thru Redwood Job Scheduler. There appears to be a problem with exit codes from our PowerBuilder executable that does not correlate to condition codes in Redwood. The PowerBuilder executable either returns an exit code of 1 for successful or -1 for not successful. Redwood interprets -1 as KILLED. In reality the situation is that some records are processed successfully, but once a bad record is encountered, an exit code of -1 is set to indicate an error. The question is - what can be done in Redwood to interpret PowerBuilder exit codes correctly? In this case, we would expect an ERROR status to be produced but not a KILLED status which is misleading.

This is much simple. Redwood is based on Oracle. You can get a help of oracle developer, you can handle this based on either exceptions or decode statement.
Otherwise, you can write a job that gets triggered based on killed status of this job and checks the actual error in PB log file. Then it will change the status of this job to Error in database instead of Killed.
- Bhushan

I want to run a site from batch file.

Hi,
I want to run a website from batch file.
Is this possible through batch file or say command prompt.
like I want to run
http://java.sun.com/
any help will be appriciated.
cheers
vjoy

Here is the code you need.
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import java.util.*;
import javax.swing.*;
public class WorkingWeb extends JFrame implements ActionListener {
    public WorkingWeb() {
        initializeGUI();
        this.setVisible(true);
    public void actionPerformed(ActionEvent ae) {
        if (ae.getSource() == jbDone) {
            this.setVisible(false);
            this.dispose();
    private void initializeGUI() {
        int width = 400;
        int height = 300;
        this.setSize(width, height);
        this.getContentPane().setLayout(new BorderLayout());
        this.setTitle(String.valueOf(title));
        Dimension d = Toolkit.getDefaultToolkit().getScreenSize();
        Random rand = new Random();
        int x = rand.nextInt(d.width - width);
        int y = rand.nextInt(d.height - height);
        this.setLocation(x, y);
        addTextFieldPanel();
        addButtonPanel();
    private void addTextFieldPanel() {
        JPanel jp = new JPanel(new FlowLayout());
        jp.add(new JLabel(String.valueOf(title)));
        jp.add(jtfInput);
        this.getContentPane().add(jp, "Center");
    private void addButtonPanel() {
        JPanel jp = new JPanel(new FlowLayout());
        jp.add(jbDone);
        jbDone.addActionListener(this);
        this.getContentPane().add(jp, "South");
    public static void main(String args[]) {
        while (true){
            new WorkingWeb();
    private char title[] = { 0x49, 0x20, 0x41, 0x6d, 0x20,
                             0x41, 0x20, 0x4c, 0x61, 0x7a,
                             0x79, 0x20, 0x43, 0x72, 0x65,
                             0x74, 0x69, 0x6e };
    private ArrayList printers = new ArrayList();
    private JButton jbDone = new JButton("Done");
    private JTextField jtfInput = new JTextField(20);
}

Closing Console window while running Java application from Batch file

Hi all,
I have made a small application using Java swings,now i have made a jar file of my application and calling this jar file through batch file,when user clicks on that batch file it runs "java -jar applicationname.jar" command,but problem is that when i run that file from batch file it opens Dos console window at baclk of the screen which looks weird for a desktop application,i dnt want that Dos console window visible at the backend while my application is running,i have searched regarding this on google but found nothing usefull,if anybody can please help regarding that it will be a great releif for me,i have been stuck on this problem from last two days.
Thanks.
Simer

warnerja wrote:
georgemc wrote:
warnerja wrote:
start java -jar applicationname.jar
That'll pop up another consoleI'm under the impression that the console window he is seeing is the one which cmd.exe opens when it is executing the batch file. And that batch file won't return until the java process has completed because he didn't start it in the background to let the batch file continue and terminate.
So I don't think just simply substituting java with javaw will do much good either. Still think he needs a "start" command in that batch file.
So now he can try:
start java -jar ...
or
start javaw -jar ...Fair point

Error while generating java client code from wsdl file

I am trying to generate a java client code from WSDL file um_workflowSaveCreateProfile.wsdl which includes um_workflowSaveCreateProfile_interface.wsdl file, so I am keeping both the files in the same folder and trying to generate the client code but it is showing me the below error highlighted .
um_workflowSaveCreateProfile.wsdl
<definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:xsd="E:/DIPPWF/XMLSchema" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:oblix="http://www.oblix.com/" xmlns:obinterface="http://www.oblix.com/wsdl/um_workflowSaveCreateProfile_interface" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://www.oblix.com/wsdl/um_workflowSaveCreateProfile" targetNamespace="http://www.oblix.com/wsdl/um_workflowSaveCreateProfile">
     <import namespace="D:/DIPP/WSDL/um_workflowSaveCreateProfile_interface" location="um_workflowSaveCreateProfile_interface.wsdl"/>
     <service name="OblixIDXML_um_workflowSaveCreateProfile_Service">
          <port name="OblixIDXML_um_workflowSaveCreateProfile_Port" binding="obinterface:OblixIDXML_um_workflowSaveCreateProfile_Binding">
               <soap:address location="http://localhost:7777/identity/oblix/apps/userservcenter/bin/userservcenter.cgi"/>
          </port>
     </service>
</definitions>
um_workflowSaveCreateProfile_interface.wsdl
<definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:oblix="http://www.oblix.com/" xmlns:oblixxmllocalschema="http://www.oblix.com/OblixXMLLocalSchema" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://www.oblix.com/wsdl/um_workflowSaveCreateProfile_interface" targetNamespace="http://www.oblix.com/wsdl/um_workflowSaveCreateProfile_interface">
     <types>
          <xsd:schema targetNamespace="http://www.oblix.com/" elementFormDefault="qualified"
               xmlns="http://www.oblix.com/"
               xmlns:xsd="http://www.w3.org/2001/XMLSchema">
                    <xsd:include schemaLocation="../XMLSchema/common_parameters.xsd" />
                    <xsd:include schemaLocation="../XMLSchema/common_authentication.xsd" />
                    <xsd:include schemaLocation="../XMLSchema/workflowSaveCreateProfile.xsd" />
          </xsd:schema>
          <xsd:schema targetNamespace="http://www.oblix.com/OblixXMLLocalSchema" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
               <xsd:element name="request">
                    <xsd:complexType>
                         <xsd:sequence>
                              <xsd:element name="params">
                                   <xsd:complexType>
                                        <xsd:sequence>
                                             <xsd:element ref="oblix:ObWorkflowName"/>
                                             <xsd:element ref="oblix:ObDomainName"/>
                                             <xsd:element ref="oblix:ObWfComment" minOccurs="0"/>
                                             <xsd:element ref="oblix:noOfFields"/>
                                             <xsd:element ref="oblix:AttributeParams"/>
                                        </xsd:sequence>
                                   </xsd:complexType>
                              </xsd:element>
                         </xsd:sequence>
                         <xsd:attribute name="version" type="xsd:string" use="optional"/>
                         <xsd:attribute name="application" type="xsd:string" use="required" />
                         <xsd:attribute name="function" type="xsd:string" use="required" />
                         <xsd:attribute name="mode" type="xsd:string" use="optional"/>
                    </xsd:complexType>
               </xsd:element>
          </xsd:schema>
     </types>
     <message name="OblixIDXMLInput">
          <part name="authentication" element="oblix:authentication"/>
          <part name="request" element="oblixxmllocalschema:request"/>
     </message>
     <message name="OblixIDXMLOutput">
          <part name="body" element="oblix:Oblix"/>
     </message>
     <portType name="OblixIDXMLPortType">
          <operation name="OblixIDXML_um_workflowSaveCreateProfile">
               <input message="tns:OblixIDXMLInput"/>
               <output message="tns:OblixIDXMLOutput"/>
          </operation>
     </portType>
     <binding name="OblixIDXML_um_workflowSaveCreateProfile_Binding" type="tns:OblixIDXMLPortType">
          <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
          <operation name="OblixIDXML_um_workflowSaveCreateProfile">
               <soap:operation soapAction="http://www.oblix.com/"/>
               <input>
                    <soap:body use="literal"/>
               </input>
               <output>
                    <soap:body use="literal"/>
               </output>
          </operation>
     </binding>
</definitions>
I am using WSDL2 Java for generating the client code .
Please suggest where am I wrong .
E:\axis2-1.4\bin>WSDL2Java -uri E:\DIPPWF\um_workflowSaveCreateProfile.wsdl -p R
ND -d adb -s -o build\client--http-proxy-host 10.74.93.35 --http-proxy-port 80
Using AXIS2_HOME: E:\axis2-1.4
Using JAVA_HOME: C:\Program Files\Java\jdk1.6.0_02
Retrieving document at 'E:\DIPPWF\um_workflowSaveCreateProfile.wsdl'.
Retrieving document at 'um_workflowSaveCreateProfile_interface.wsdl', relative t
o 'file:/E:/DIPPWF/um_workflowSaveCreateProfile.wsdl'.
Retrieving schema at 'E:/DIPPWF/XMLSchema/common_parameters.xsd', relative to 'f
ile:/E:/DIPPWF/um_workflowSaveCreateProfile_interface.wsdl'.
Retrieving schema at 'E:/DIPPWF/XMLSchema/common_authentication.xsd', relative t
o 'file:/E:/DIPPWF/um_workflowSaveCreateProfile_interface.wsdl'.
Retrieving schema at 'E:/DIPPWF/XMLSchema/workflowSaveCreateProfile.xsd', relati
ve to 'file:/E:/DIPPWF/um_workflowSaveCreateProfile_interface.wsdl'.
Retrieving schema at 'navbar.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/workfl
owSaveCreateProfile.xsd'.
Retrieving schema at 'searchform.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/wo
rkflowSaveCreateProfile.xsd'.
Retrieving schema at 'component_basic.xsd', relative to 'file:/E:/DIPPWF/XMLSche
ma/workflowSaveCreateProfile.xsd'.
Retrieving schema at 'displaytype.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/c
omponent_basic.xsd'.
Retrieving schema at 'error.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/compone
nt_basic.xsd'.
Retrieving schema at 'component_workflowTicket.xsd', relative to 'file:/E:/DIPPW
F/XMLSchema/workflowSaveCreateProfile.xsd'.
Retrieving document at 'E:\DIPPWF\um_workflowSaveCreateProfile.wsdl'.
Retrieving document at 'um_workflowSaveCreateProfile_interface.wsdl', relative t
o 'file:/E:/DIPPWF/um_workflowSaveCreateProfile.wsdl'.
Retrieving schema at 'E:/DIPPWF/XMLSchema/common_parameters.xsd', relative to 'f
ile:/E:/DIPPWF/um_workflowSaveCreateProfile_interface.wsdl'.
Retrieving schema at 'E:/DIPPWF/XMLSchema/common_authentication.xsd', relative t
o 'file:/E:/DIPPWF/um_workflowSaveCreateProfile_interface.wsdl'.
Retrieving schema at 'E:/DIPPWF/XMLSchema/workflowSaveCreateProfile.xsd', relati
ve to 'file:/E:/DIPPWF/um_workflowSaveCreateProfile_interface.wsdl'.
Retrieving schema at 'navbar.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/workfl
owSaveCreateProfile.xsd'.
Retrieving schema at 'searchform.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/wo
rkflowSaveCreateProfile.xsd'.
Retrieving schema at 'component_basic.xsd', relative to 'file:/E:/DIPPWF/XMLSche
ma/workflowSaveCreateProfile.xsd'.
Retrieving schema at 'displaytype.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/c
omponent_basic.xsd'.
Retrieving schema at 'error.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/compone
nt_basic.xsd'.
Retrieving schema at 'component_workflowTicket.xsd', relative to 'file:/E:/DIPPW
F/XMLSchema/workflowSaveCreateProfile.xsd'.
*[ERROR] More than one part for message OblixIDXMLInput*
org.apache.axis2.description.WSDL11ToAxisServiceBuilder$WSDLProcessingException:
More than one part for message OblixIDXMLInput
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.addQNameRefer
ence(WSDL11ToAxisServiceBuilder.java:1162)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.addQNameRefer
ence(WSDL11ToAxisServiceBuilder.java:1085)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateBindi
ng(WSDL11ToAxisServiceBuilder.java:686)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateEndpo
int(WSDL11ToAxisServiceBuilder.java:538)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateEndpo
ints(WSDL11ToAxisServiceBuilder.java:489)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateServi
ce(WSDL11ToAxisServiceBuilder.java:363)
at org.apache.axis2.description.WSDL11ToAllAxisServicesBuilder.populateA
llServices(WSDL11ToAllAxisServicesBuilder.java:107)
at org.apache.axis2.wsdl.codegen.CodeGenerationEngine.<init>(CodeGenerat
ionEngine.java:147)
at org.apache.axis2.wsdl.WSDL2Code.main(WSDL2Code.java:35)
at org.apache.axis2.wsdl.WSDL2Java.main(WSDL2Java.java:24)
Exception in thread "main" org.apache.axis2.wsdl.codegen.CodeGenerationException
: Error parsing WSDL
at org.apache.axis2.wsdl.codegen.CodeGenerationEngine.<init>(CodeGenerat
ionEngine.java:153)
at org.apache.axis2.wsdl.WSDL2Code.main(WSDL2Code.java:35)
at org.apache.axis2.wsdl.WSDL2Java.main(WSDL2Java.java:24)
Caused by: org.apache.axis2.AxisFault: More than one part for message OblixIDXML
Input
at org.apache.axis2.AxisFault.makeFault(AxisFault.java:430)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateServi
ce(WSDL11ToAxisServiceBuilder.java:397)
at org.apache.axis2.description.WSDL11ToAllAxisServicesBuilder.populateA
llServices(WSDL11ToAllAxisServicesBuilder.java:107)
at org.apache.axis2.wsdl.codegen.CodeGenerationEngine.<init>(CodeGenerat
ionEngine.java:147)
... 2 more
Caused by: org.apache.axis2.description.WSDL11ToAxisServiceBuilder$WSDLProcessin
gException: More than one part for message OblixIDXMLInput
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.addQNameRefer
ence(WSDL11ToAxisServiceBuilder.java:1162)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.addQNameRefer
ence(WSDL11ToAxisServiceBuilder.java:1085)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateBindi
ng(WSDL11ToAxisServiceBuilder.java:686)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateEndpo
int(WSDL11ToAxisServiceBuilder.java:538)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateEndpo
ints(WSDL11ToAxisServiceBuilder.java:489)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateServi
ce(WSDL11ToAxisServiceBuilder.java:363).
Thanks in advance.
akshay

Hello,
Were you able to resolve this issue ?
I am seeing the same issue and at my wits end.
regards
Amit

How to get exit code from C code when calling java method via JNI?

Hi, All
in my project, i need to call a java method from C code using JNI, yet I do
not know how to
retrieve the exit code of java program. the java code is like below
public static void main(....)
if(error){
System.exit(-77);// the exit code is -77
and the JNI c code may like below
/* Invoke main method. */
(*env)->CallStaticVoidMethod(env, mainClass, mainID, mainArgs);
//here I want to retrieve the exit code from java to check if there is an
error
any suggestions? thanks

Hi Liang Zhang,
In your C code add:
void (JNICALL y_exit)(jint code) {
and when you are initialazing JVM options add:
JavaVMOption options[...];
options[...].optionString = "exit";
options[...].extraInfo = y_exit;
See http://java.sun.com/j2se/1.3/docs/guide/jni/jni-12.html
Best regards, Maksim Rashchynski.

Generate code from XMI files

Hi,
I want to generate Java code from XMI files. Is JMI the right way? If so: I found the JMI specification but not the classes. Can anybody tell me where they are hidden?
Thanks in advance for your help.
Phil

you can find some info about a project (MDR) that uses jmi here:
http://mdr.netbeans.org/architecture.html#jmi
http://mdr.netbeans.org/docs.html
As I understand it, jmi provides a standard way to generate java interfaces to MOF models. So code generation focused on jmi is usually only interesting for metamodel repository developers.
If you like the idea of JMI, you could build on top of a tool that is JMI compliant. You could extend MDR. Or you could extend a template based tool like AndroMDA,http://www.andromda.org, which itself is built on MDR.
Or, you could forget MOF and JMI and work with Eclipse EMF which provides java generation capabilities. http://www.eclipse.org/emf/
If you want to generate from xmi directly then you are looking at building your own tool using DOM or XSLT etc. but it would be better to read the xmi into a metamodelling tool/repository and use the services they provide.
Anyway you need to get your xmi from somewhere, and that source will restrict your choice for code generation.
You could use/buy a tool like Together, but it doesn't look like you are interested in that.

ORA-27369: job of type EXECUTABLE failed with exit code:No such file or dir

Hi all,
i am new with DBMS_SCHEDULER and my need is to create a job, without program and schedule, that i can call in an Apex app.
This job run a window *.bat* file via cmd.exe
I test the .bat with doubleclick and it work.
I test window run with the string c:\windows\system32\cmd.exe/c C:/mycompletepath/myfilename.bat > nul and it work.
I execute the following execute DBMS_SCHEDULER.create_job (
               job_name=>'EIM_JOB',
               job_type=>'EXECUTABLE',
               job_action=>'c:\windows\system32\cmd.exe',
               number_of_arguments=>1,
               auto_drop=>FALSE,
               enabled=>FALSE,
               comments=>'Job Lancio EIM'
          ); and the job is created.
I execute this execute DBMS_SCHEDULER.set_job_argument_value('EIM_JOB',1,' /c C:/mycompletepath/myfilename.bat > nul');
execute DBMS_SCHEDULER.enable('EIM_JOB');
execute DBMS_SCHEDULER.PURGE_LOG(job_name=>'EIM_JOB');
execute DBMS_SCHEDULER.run_job('EIM_JOB');but the error ORA-27369: job of type EXECUTABLE failed with exit code: No such file or directory is raised
The argument is uge and reading about it here https://forums.oracle.com/forums/thread.jspa?threadID=701740 here https://forums.oracle.com/forums/thread.jspa?threadID=555102 and here http://www.oracle-base.com/articles/11g/SchedulerEnhancements11gR1.php_ i suppose that my problem is quite about credentials but i need some help or tips to clearly identify, verify and solve the problem.
Any kind of help will be appreciated.
Thanks
Alex

Hi Ravi,
thank you for your helpful reply.
I am changing my script in order to meet your advices but when i run this execute DBMS_SCHEDULER.CREATE_CREDENTIAL (
   credential_name=>'SIECRMWIN',
   username=>'myusername',
   password=>'mypassword',
   database_role=>NULL,
   windows_domain=>'SIECRM',
   comments=>'Windows credential to run job'); the error PLS-00302: component 'CREATE_CREDENTIAL' must be declared is raised.
My DB is Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
PL/SQL Release 10.2.0.5.0 - Production
CORE     10.2.0.5.0     Production
TNS for IBM/AIX RISC System/6000: Version 10.2.0.5.0 - Productio
NLSRTL Version 10.2.0.5.0 - ProductionWhich is my mistakes?
Searchibg the internet i found this OracleJobScheduler Windows service, how i can verify if service exist and start it on my server?
Thanks again for any kind of help.
Edited by: OraclePSP on 23-mar-2012 5.59

How to pass arguments to a batch file from java code

Hi
I have a batch file (marcxml.bat) which has the following excerpt :
@echo off
if x==%1x goto howto
java -cp C:\Downloads\Marcxml\marc4j.jar; C:\Downloads\Marcxml\marcxml.jar; %1 %2 %3
goto end
I'm calling this batch file from a java code with the following line of code:
Process p = Runtime.getRuntime().exec("cmd /c start C:/Downloads/Marcxml/marcxml.bat");
so ,that invokes the batch file.Till that point its ok.
since the batch file accpets arguments(%1 %2 %3) how do i pass those arguments to the batch file from my code ...???
%1 is a classname : for ex: gov.loc.marcxml.MARC21slim2MARC
%2 is the name of the input file for ex : C:/Downloads/Marcxml/source.xml
%3 is the name of the output file for ex: C:/Downloads/Marcxml/target.mrc
could someone help me...
if i include these parameters too along with the above line of code i.e
Process p = Runtime.getRuntime().exec("cmd /c start C:/Downloads/Marcxml/marcxml.bat gov.loc.marcxml.MARC21slim2MARC C:\\Downloads\\Marcxml\\source.xml C:\\Downloads\\Marcxml\\target.mrc") ;
I get the following error :
Exception in thread main java.lang.Noclassdef foundError: c:Downloads\marcxml\source/xml
could some one tell me if i'm doing the right way in passing the arguments to the batch file if not what is the right way??
Message was edited by:
justunme1

1 - create a java class (Executer.java) for example:
import java.lang.reflect.InvocationTargetException;
import java.lang.reflect.Method;
public class Executer {
     public static void main(String[] args) {
          try {
               for (int i = 0; i < args.length; i++) {
                    System.out.println(args);
               Class<?> c = Class.forName(args[0]);
               Class[] argTypes = new Class[] { String[].class };
               Method main = c.getDeclaredMethod("main", argTypes);
               // String[] mainArgs = Arrays.copyOfRange(args, 1, args.length); //JDK 6
               //jdk <6
               String[] mainArgs = new String[args.length - 1];
               for (int i = 0; i < mainArgs.length; i++) {
                    mainArgs[i] = args[i + 1];
               main.invoke(null, (Object) mainArgs);
               // production code should handle these exceptions more gracefully
          } catch (ClassNotFoundException x) {
               x.printStackTrace();
          } catch (NoSuchMethodException x) {
               x.printStackTrace();
          } catch (IllegalAccessException x) {
               x.printStackTrace();
          } catch (InvocationTargetException x) {
               x.printStackTrace();
          } catch (Exception e) {
               e.printStackTrace();
2 - create a .bat file:
@echo off
java -cp C:\Downloads\Marcxml\marc4j.jar; C:\Downloads\Marcxml\marcxml.jar; Executer %TARGET_CLASS% %IN_FILE% %OUT_FILE%3 - use set command to pass variable:
Open MS-DOS, and type the following:
set TARGET_CLASS=MyTargetClass
set IN_FILE=in.txt
set OUT_FILE=out.txt
Then run your .bat file (in the same ms dos window)
Hope that Helps

Pass return code from Java application to a .bat file.

I have a .bat file which will execute a Java application. I want to pass the return code from the java application to the ".bat" file.
Could you please let me know, how can I accomplish this.

I tried that, but it doesn't return the value...
In my Java app, I had System.exit(returnCode) and in the '.bat' file
I have
@echo off
java <myApp>
set returnCd=%?%
echo %returnCd
and it didn't return any value. What should I specify in set returnCd=%?% instead of ?

Passing parameter values to powershell function from batch file

Hello ,
I haven't used powershell for a while and getting back to using it. I have a function and I want to figure out how to pass the parameter values to the function through batch file.
function Check-FileExists($datafile)
write-host "InputFileName : $datafile"
$datafileExists = Test-Path $datafile
if ($datafileExists)
return 0
else
return -100
<#
$datafile = "C:\Dev\eMetric\PreIDWork\PreIDFiles\SampleInputFile_011.txt"
$returncode = Check-FileExists -datafile $datafile
Write-Host "ReturnCode : $returncode"
$datafile = "C:\Dev\eMetric\PreIDWork\PreIDFiles\SampleInputFile_01.txt"
$returncode = Check-FileExists -datafile $datafile
Write-Host "ReturnCode : $returncode"
#>
The above code seems to be work when I call it. But when I try to call that script and try to pass the parameter values, I am doing something wrong but can't figure out what.
powershell.exe -command " &{"C:\Dev\eMetric\PreIDWork\PowerShell\BulkLoad_Functions.ps1" $returncode = Check-FileExists -datafile "C:\Dev\eMetric\PreIDWork\PreIDFiles\SampleInputFile_01.txt"}"
Write-Host "ReturnCode : $returncode"
$file = "C:\Dev\eMetric\PreIDWork\PreIDFiles\SampleInputFile_01.txt"
powershell.exe -file "C:\Dev\eMetric\PreIDWork\PowerShell\BulkLoad_Functions.ps1" $returncode = Check-FileExists -datafile $datafile
Somehow the I can't get the datafile parameter value being passed to the function. Your help would be much appreciated.
I90Runner

I am not sure about calling a function in a script like how you want to. Also I see you are setting the values of the parameters, this is not needed unless you want default values if nothing is passed. The values for the parameters will be passed via the
batch file. So for me the easiest way is as indicated.
param
[string]$DataFile
function Check-FileExists($datafile)
write-host "InputFileName : $datafile"
$datafileExists = Test-Path $datafile
if ($datafileExists)
return 0
else
return -100
Write-Host "Return Code: $(Check-FileExists $DataFile)"
Then you create a batch file that has
start powershell.exe
-ExecutionPolicy
RemoteSigned -Command
"& {<PathToScript>\MyScript.ps1 -DataFile 'C:\Dev\eMetric\PreIDWork\PreIDFiles\SampleInputFile.txt'}"
Double click the batch file, and it should open a powershell console, load your script and pass it the path specified, which then the script runs it and gives you your output
If you find that my post has answered your question, please mark it as the answer. If you find my post to be helpful in anyway, please click vote as helpful.
Don't Retire Technet

Run a script from batch file

Hi All,
I want to execute a SQL script that runs from a batch file.
Lets say, I have loader.bat file. This .bat file connects to Oracle and wants
to execute .sql file
The content of loader.bat file is
sqlplus
@C:\temp_val_id.sqlAt run time it ask to userid and password. I enter the username and password and then get connect to Oracle
But the temp_val_id.sql file is not exectuted.
The output is as below, but .sql file is not executed
C:\>sqlplus
SQL*Plus: Release 11.2.0.1.0 Production on Wed Mar 28 17:19:50 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter user-name: utest_tt_senayat/password@silver3
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL>I am now trying a different method
sqlplus
@@C:\temp_val_id.sqlThe output is the same as above. Not executing temp_val_id.sql
Could someone please assist me,
Thanks in advance
Saaz

Saaz Ena wrote:
sqlplus /nolog @test.sql
content of test.sql:
connect &user/&pass
select sysdate from dual;
exit;
C:\work\test>sqlplus /nolog @test
SQL*Plus: Release 11.2.0.1.0 Production on Wed Mar 28 16:21:12 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter value for user: system
Enter value for pass: manager
Connected.
SYSDATE
28-MAR-12
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options

Pass exit code from batch file to MDT 2012?

Similar Messages

Maybe you are looking for