Pass parameters to custom application from launchpad

Hi!
I have custom WD-application which is launched from "Related links" menu in standard application (bid, srm 7.0).
I've added my item the menu with LPD_CUST transaction, but it is not clear how to pass some parameter to the application being launched.

Hi,
Have you created that guide?
can you share it?

Similar Messages

How to invoke ADF custom application from existing R12 EBS application

Hi Guru's,
We have a requirement to invoke ADF custom application from existing EBS R12.1.3 application.
Is there any documentation provided by ORACLE or any online help on how to integrate/invoke ADF pages from existing EBS application?
And can we pass any EBS session level parameters like(user info, language, operating unit etc) to ADF layer while invoking the ADF application?
I have thoroughly searched the forums and got some info related to JAAS security links and all. but i am looking for exact integration specific steps.
Any help in this regard is a great help!!
Thanks alot for your help!!
Subba.

lets raise your question over here
JDeveloper and ADF
Thanks
vamshi.

How to call & pass values to custom page from seeded page table region

Hi All,
can anyone tell me how to call & pass values to custom page from seeded page table region(Attribute is not available in seeded page VO)
it is urgent. plssss
Regards,
purna

Hi,
Yes, we do this by extending controller, but you can also try this without extending controller.
1. Create Submit Button on TableRN using personalization.
2. Set "Destination URI" property to like below
OA.jsp?page=/<yourname>/oracle/apps/ak/employee/webui/EmpDetailsPG&employeeNumber={@EmployeeId}&employeeName={@EmployeeName}&retainAM=Y&addBreadCrumb=Y
Give your custom page path instead of EmpDetailsPG.
EmployeeId and EmployeeName are VO attributes(Table Region)
If you dont have desired attribute in VO, then write logic in your custom page controller to get required value using parameters passed from URL path.
In this case, only personalization will do our job. Hope it helps.
Thanks,
Venkat Y.

Is it possible to pass parameters to custom search portlet?

Hello!
I use custom search to display automatically results.
But I need to dynamically add some conditions or change sort order based on user selection in another portlet.
So, is it possible to pass parameters to custom search portlet?
Boris
P.S. I am use Portal 9.0.4

Hello!
Ok, I find how to hack it and find out parameters (p_mainsearch, p_order_by_attribute...), but is there any documentation or notes about it?
And is it possible to change order by list & add there my attributes?
Kind regards,
Boris

Passing Parameters via Post Method from Webdynpro Java to a web application

Hello Experts,
I want to pass few parameters from a web dynpro application to an external web application.
In order to achieve this, I am referring to the below thread:
HTTP Post
As mentioned in the thread, I am trying to create an additional Suspend Plug parameter (besides 'Url' of type String) with name 'postParams' and of type Map.
But when I build my DC, I am getting the same error which most of the people in the thread have mentioned:
Controller XXXCompInterfaceView [Suspend]: Outbound plug (of type 'Suspend') 'Suspend' may have at most two parameters: 'Url' of type 'string' and 'postParams' of type 'Map'.
I am using SAP NetWeaver Developer Studio Version: 7.01.00
Kindly suggest if this is the NWDS version issue or is it something else that I am missing out.
Also, if it is the NWDS version issue please let me know the NWDS version that I can use to avoid this error.
Any other suggestion/alternative approach to pass the parameters via POST method from webdynpro java to an external web application apart from the one which is mentioned in the above thread is most welcome.
Thanks & Regards,
Anurag

Hi,
This is purely a java approach, even you can try this for your requirement.
There are two types of http calls synchronous call or Asynchronous call. So you have to choose the way to pass parameters in post method based on the http call.
if it is synchronous means, collect all the values from users/parameters using UI element eg: form and pass all the values via form to the next page is nothing but your web application url.
If it is Asynchronous means, write a http client in java and integrate the same with your custom code and you can find an option for sending parameters in post method.
here you go and find the way to implement Asynchronous scenario,
http://www.theserverside.com/news/1365153/HttpClient-and-FileUpload
http://download.oracle.com/javase/tutorial/networking/urls/readingWriting.html
http://digiassn.blogspot.com/2008/10/java-simple-httpurlconnection-example.html
Thanks & Regards
Rajesh A

Passing parameters to oracle rports from oracle forms

Dear all,
Can anyone tell me how to pass parameters from oracle forms 10g to oracle reports 10g ,i want to hide my connection string and parameteres while open the report through web
can anyone plese help me out to solve this problem.

Hi,
I had trail as advised, but anticipated results were not observed.
Here is the named configuration in formsweb.cfg
[NMPT]
form=D:\NMPT\FORMS\FHOPENFORM.fmx
userid=hmsprod/hmsprod@hindalco
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
imageBase=CodeBase
separateFrame=True
lookandfeel=oracle
logo=none
splashScreen=no
pageTitle =Test Application
background=no
colorScheme=blue
archive_jini=f90all_jinit.jar,icons.jar,frmwebutil.jar,jacob.jar
archive=f90all.jar
height=768
width=1024
envFile=nmpt.env
otherparams=useSDI=yesLOCATIONID=NMPT # new parameter which I want to access in my form
the URL is as follows:
http://MyPC:8888/forms90/f90servlet?config=NMPT
But I am unable to open the login page

Getting and passing parameters in standalone application

Hi,
I am calling one java standalone application from another standalone application like the following
Class c=Class.forName("Ivr");
Object obj=c.newInstance();
Ivr h=(Ivr)obj;
h.service(request,channel);I want to pass and get parameters in both the application.Is it possible in standalone application?
Thanks.
Edited by: preethaayyappan on Aug 13, 2008 10:15 PM

DrLaszloJamf wrote:
Why didn't you do this?
Ivr h= new Ivr();
Indeed much of the posted code in the OP looks like a failed attempt to be "enterprisey".
@OP Why don't you look at the Javadocs for this Ivr or whatever thing you have there?

How to run and pass parameters to exe file from the .txt file

hi,
i am facing problem with passing parameters to the .exe file which is run by labview.firstly i have .txt script with parameters which i have to pass to .exe file. This .exe file is also a software and that script is written for it.And now i have to create programm in labview which should fullfill following points.
1. I have to use one knob named 'Run script'.If i pressed the knob ,it should open the Browser where i can choose .txt script file.
2. .exe application should open(Path already chossen).
3. after passing the parameters .exe application should closed.
4.And labview now should update his parameter
I can just open .exe file using Exce.vi but i dont getting any idea to do more than this.can somebody please help me?
Solved!
Go to Solution.

This depends on the exe file. Does it retrieve the information as standard input or does it require the information as command line arguments?
Depending on this, you can read the txt-file in LV (using the file functions) and pass the content to the System Exec.vi.
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

How do you remove non-App Store apps that are not in Applications from Launchpad?

Hi, this is my first post to the Apple forums...
     So, I use the Steam game app a lot to manage my different games on my computer. Recently, I cleaned out the games I no longer wanted or had lost interest in, and all of their files, INCLUDING the .app files stored in Application Support, were successfully deleted. But, Steam also automatically adds app shortcuts to the Launchpad when you download a game, which is an option I always left checked during the download process- because why not, right?
     The problem is that now, even after completely deleting ALL TRACE of these apps, they remain on my Launchpad. Just keeping them there isn't a solution; as a very neat, organized person, it would annoy me to the end of time to have random apps on my Launchpad that don't do anything. And since these apps aren't from the App store, they don't have an (X) in the upper left hand corner when you hold down on them.
     I don't know tons about Macs, but after a quick scan of things online people have recommended deleting all the files for your Dock under Application Support, because apparently Launchpad is based on your dock. But that doesn't sound right to me. I thought Launchpad was based on Applications? Again, I'm more savvy with Windows but I just got this thing a year ago so I'm doing what I can.
     On a side note, these game applications were stored in a folder titled "Games", which was originally identical within both Applications and Launchpad. Once I began deleting apps from the folder in Applications, however, they got stuck in the folder within Launchpad.
     I also cannot move Game Center out of the folder in Launchpad, and when I do so it says "This app cannot be modified/deleted", even though I originally had Game Center outside of the folder.
Computer specs:
MacBook Pro 15 Inch (mid 2009)
Running OS X Yosemite (10.10.1) [I updated just last night, I had been running 10.9 before and still had this problem]
Processor: 2.8 GHz Intel Core 2 Duo
Memory: 4 GB 1067 MHz DDR3
Graphics: NVIDIA GeForce 9600M GT 512 MB

I found the following in the Macbook Help, and the last bullet worked for me.
"You can uninstall apps you got from the Mac App Store, from other websites, or from discs. You can’t uninstall apps that are part of OS X, such as Safari and Mail.
Apps downloaded from the Mac App Store: Click the Launchpad icon in the Dock, hold down an app’s icon until all the icons begin to jiggle, then click an app’s delete button . If you later want the app, you can reinstall it from the Mac App Store.If an icon doesn’t have a delete button, it can’t be uninstalled in Launchpad. For more information about Launchpad, see Use Launchpad to view and open apps.
Apps that have an uninstaller: In the Finder sidebar, click Applications. If an app is inside a folder, it might have an Uninstaller. Open the app’s folder. If you see Uninstall [App] or [App] Uninstaller, double-click it and follow the onscreen instructions.
Apps that don’t have an uninstaller: In the Finder sidebar, click Applications. Drag the app from the Applications folder to the Trash (located at the end of the Dock), then choose Finder > Empty Trash.If you change your mind, before emptying the Trash, select the app in the Trash, then choose File > Put Back.WARNING: When you empty the Trash, the app is permanently removed from your Mac. If you have any files that you created with the app, you may not be able to open them."

How to migrate custom application from AK to MDS ?

I have got a custom application in Apps 11.5.8 where the data is stored in the AK_REGIONS table, etc. and the custmo application is registered in FND_APPLICATION table correctly. When applying the OAF 5.7 patch, the data is not migrated to MDS.
Answer:
This is because the OAF 5.7 patch does not migrate product data automatically. It is up to the development teams to do this.
With Custom applications, there is apparently no documented or supported mechanism to migrate this data from AK to MDS.
Solution:
OA Framework 5.7 (or OAF 5.10) can read the page definitions out of AK, so there is no pressing need to migrate the page definitions anyway. (See Metalink Note 216823.1 for example of this) When a page needs to be changed, the page will need to be changed via AK Developer as before, or manually recreated using JDeveloper which will then be using the MDS repository.

Do you mind telling me how you do it from the client ? All the libraries for the import utilities seem to be present in the application server. How (and what) to bring to the client where my jdeveloper resides ?
Thanks in advance...

How to pass parameters/atrributes to Servlet from ALBPM

HI Friends,
I am invoking servlet from bpm using server configuration, i am able to invoke servlet, but not able to pass parameters dynamically,
Also I like to receive response parameters/attributes from servlets?
Can any body help me on this?
Look forward for response.
Cheers

Some helpful Docs on the WebServer component for you:
The WebServer component is used to send HTTP requests to an HTTP server and capture the responses. It supports HTTP methods GET and POST.
The body of the HTTP response is available in the WebServer.response attribute (String).
Note: This component is superseded by the Fuego.NetX.AdvancedWebServer component, which provides better performance and more functionality like support for proxies and for more HTTP methods (like PUT and DELETE).
Example: Get Oracle's website home page and save it to a file.
getFrom(WebServer, url : "http://oracle.com", args : null)
binaryResponse = Binary(text: WebServer.response,
encoding: "UTF8")
BinaryFile.writeFromBinaryTo(data : binaryResponse,
name : "/tmp/oracle_index.html",
append : false)

Unable to run extended Approve Requests Application from Launchpad

We are implementing the approve request application for custom workflows and we have set up our eclipse environment and made the necessary changes to run our application locally in the Fiori Sandbox provided as part of the UI5 toolkit. We have extended the application by creating an extension project and fiori extensions in this extension project.
We are able to run this extended application also in the Sandbox and test it there.
When we upload the extended application to the ABAP server and change the URL in the Launchpad transaction LPD_CUST to point to the extended application we are getting an error.
I suspect it is related to how we have set up our component.js file for the extended application since it is responsible for merging the extended application with the parent one at runtime and displaying the extended application.
The error I am getting in the console is
Error - found in negative cache: 'cross/fnd/approve/requests/Component.js' from /sap/bc/ui5_ui5/sap/yca_all_apve/Component.js: TypeError: Cannot call method 'extend' of undefined core.js:78
u core.js:78
error core.js:78
sap.ui.controller.openApp core.js:663
sap.ui.core.EventBus.publish core.js:307
sap.ui.controller.openSomething core.js:663
f3 core.js:55
n core.js:55
o.fireWith core.js:55
o.fire core.js:55
(anonymous function) ushell-preload.js:45
(anonymous function) core.js:439
n9
Has anyone run into similar error and found a resolution?
Regards
Puneet

I'm sorry I can't help, but you might be better of posting this in the Reports forum at Reports

Unable to Pass Parameters to Custom PopUp Window ??

Hi
Please help in passing Data from an MXML file to my POPUp window mxml
MainMXML File :
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" width="100%" height="100%" horizontalAlign="left" verticalAlign="middle">
    <mx:Script>
        <![CDATA[
            import mx.events.FlexMouseEvent;
            import MyPopUpWindow;
            import mx.events.FlexEvent;
            import mx.managers.PopUpManager;
            private var popup:MyPopUpWindow;
            private function openPopUpWindow():void {
                popup = PopUpManager.createPopUp(this,MyPopUpWindow,true) as MyPopUpWindow;
                PopUpManager.centerPopUp(popup);
        ]]>
    </mx:Script>
    <mx:Canvas width="288" height="177">
       <mx:HBox id="jai">
        <mx:Image source="images/canvas.png" visible="true" height="100%" width="100%"/>
        <mx:Label id="kkk" text="Ravi"/>
        <mx:Button label="Edit" click="openPopUpWindow()"/>
    </mx:HBox>
    </mx:Canvas>
</mx:Application>
=======
MyPopuWindow.mxml
<?xml version="1.0" encoding="utf-8"?>

<mx:TitleWindow xmlns:mx="http://www.adobe.com/2006/mxml"
        layout="vertical"
        title="My Custom PopUp Window"
        showCloseButton="true"
        close="PopUpManager.removePopUp(this)">
        <mx:Script>
            <![CDATA[
                import mx.managers.PopUpManager;
            ]]>
        </mx:Script>
        <mx:Form>
            <mx:FormHeading label="User"/>
            <mx:FormItem label="Username">
                <mx:TextInput id="un" />
            </mx:FormItem>
        </mx:Form>
</mx:TitleWindow>
On to the TextInput i need to have the value of Label kkk value . I tried with inline binding but it didn't worked
<mx:TextInput id="un" text= {kkk.text}/> isn't working . please help

Thanks for the idea, I did this way . Its working but worried as what happens if its not present inside Main Appliction.mxml
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" width="100%" height="100%" horizontalAlign="left" verticalAlign="middle">
    <mx:Script>
        <![CDATA[
            import mx.events.FlexMouseEvent;
            import MyPopUpWindow;
            import mx.events.FlexEvent;
            import mx.managers.PopUpManager;
            private var popup:MyPopUpWindow;
            [Bindable]
            public var str:String ;
            private function openPopUpWindow():void {
                popup = PopUpManager.createPopUp(this,MyPopUpWindow,true) as MyPopUpWindow;
                str = kkk.text;
                PopUpManager.centerPopUp(popup);
        ]]>
    </mx:Script>
    <mx:Canvas width="288" height="177">
       <mx:HBox id="jai">
        <mx:Image source="images/canvas.png" visible="true" height="100%" width="100%"/>
        <mx:Label id="kkk" text="Pavan"/>
        <mx:Button label="Edit" click="openPopUpWindow()"/>
    </mx:HBox>
    </mx:Canvas>
</mx:Application>
========
<?xml version="1.0" encoding="utf-8"?>

<mx:TitleWindow xmlns:mx="http://www.adobe.com/2006/mxml"
        layout="vertical"
        title="My Custom PopUp Window"
        showCloseButton="true"
        close="PopUpManager.removePopUp(this)">
        <mx:Script>
            <![CDATA[
                import mx.core.Application;
                import mx.managers.PopUpManager;
            ]]>
        </mx:Script>
        <mx:Form>
            <mx:FormHeading label="User"/>
            <mx:FormItem label="Username">
                <mx:TextInput id="un" text="{Application.application.str}"/>
            </mx:FormItem>
        </mx:Form>
</mx:TitleWindow>
please sugest correct approach .

Pass parameters into a method from other methods.

I m testing 2 related applications with coded ui test and wanna pass a parameter from one method into another.
how can i do that?
Thank you in advance.

Hi mah ta,
Could you please tell us what about this problem now?
If you have been solved the issue, would you mind sharing us the solution here? So it would be helpful for other members who get the same issue.
If not, please let us know the latest information about it.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Passing Parameters to Discoverer report from ORacle Forms

Hi All,
Can I pass a value to a parameter defined in the discoverer page from a D2k form? I want to call a discovere page from fmb while passing a parameter.
This is extremely urgent for me. Pl help .
Thank you and Regards,
Vaibhav M. Shah.

Hi ,
Are you saying I should create a new workbook that is not based on my custom folder for setting and showing the context value? You don't need to create a new workbook, you can just create a new worksheet in your report workbook, but you will need two sheets to use contexts. The sheet that sets the contexts should not be based on your custom folder, but on a folder that returns a single row. You cannot set and check contexts in a single SQL statement, so you have to have 2 worksheets.
You can default the contexts using a trigger or initialisation SQL so that the user only has to set the contexts if they are not using the defaults.
Rod West

Pass parameters to custom application from launchpad

Similar Messages

Maybe you are looking for