Passing a value to htmld form from a static internet page.
i have a static internet page in which trea are a lot of articles with their code.
can i call a HTMLDB20 page in which there i a form and a field (CODE_ARTICLE) I WANT TO PUT the code of the static page.
i have try this :
http://myserver.com/pls/htmldb/f?p=107:2:1734753335818451389:::::var_codart,21
but what i do in the form to recive this value ??
or it is not possible ???
Thank again.
i have found the solution :
must be the end of calling
::::::P2_CODICE_ART:21
intstead of ","
now work well.
Thanks
Similar Messages
-
I am trying to pass the value of a field from the seeded page /oracle/apps/
I am trying to pass the value of a field from the seeded page /oracle/apps/asn/opportunity/webui/OpptyDetPG. The value I want is in the VO oracle.apps.asn.opportunity.server.OpportunityDetailsVO and the field PartyName.
I have created a button on the page whose destination URL is
OA.jsp?OAFunc=XX_CS_SR_QUERY&CustName={#PartyName}
It opens the correct page, but in the URL it shows this
http://aa.com:8005/OA_HTML/OA.jsp?OAFunc=XX_CS_SR_QUERY&CustName=&_ti=1897289736&oapc=177&oas=x5E2TIfP1Y0FykBt1ek4ug..
You can see that &CustName is not getting the proper value. Do I need to do something different?You cannot call the form with OA.jsp . This is applicable only for OAF based pages registered as a function.
For calling a Form, use the below example:
You have to change the application responsibility key and form function name .
"form:PN:PN:STANDARD:XXPNTLEASE:QUERY_LEASE_ID={@QueryLeaseNumber}"
Regards,
Sudhakar Mani
http://www.oraclearea51.com -
How to retrieve the procedure value and pass the value to a form field
How to retrieve the procedure value and pass the value to a form field?
Set property for the field and the value is the actual procedure/function.
Cheers -
I am facing a problem in passing multiple values as out parameters from fo
Hi All,
i am facing a problem in passing multiple values as out parameters from for loop.
EX:
i have a select statment inside a loop like.....
PACKAGE SPEC:
create or replace PACKAGE EMP_PKG AS
TYPE TAB_NUM IS TABLE OF SCOTT.EMP.EMPNO%TYPE;
TYPE TAB_NAME IS TABLE OF SCOTT.EMP.ENAME%TYPE;
TYPE TAB_JOB IS TABLE OF SCOTT.EMP.JOB%TYPE;
temp_table TAB_NUM;
procedure test(temp_TAB_e_no OUT TAB_NUM,
temp_TAB_e_name OUT TAB_NAME,
temp_TAB_e_job OUT TAB_JOB);
END EMP_PKG;
PACKAGE BODY:
create or replace PACKAGE BODY EMP_PKG AS
v_e_no NUMBER;
procedure test(temp_TAB_e_no OUT TAB_NUM,
temp_TAB_e_name OUT TAB_NAME,
temp_TAB_e_job OUT TAB_JOB) IS
BEGIN
select EMPNO bulk collect into temp_table from emp;
for i in 1..temp_table.count loop
v_e_no := temp_table(i);
select empno,
ename,
job
into temp_TAB_e_no(i),
temp_TAB_e_name(i),
temp_TAB_e_job(i)
from emp
where empno = v_e_no;
end loop;
end test;
END EMP_PKG;
PROBLEM FACING IS:
I am expecting all rows returning from bellow select statment ...
select empno,
ename,
job
into temp_TAB_e_no(i),
temp_TAB_e_name(i),
temp_TAB_e_job(i)
from emp
where empno = v_e_no;
But,while running the SP , i am getting error like
ORA-06531: Reference to uninitialized collection
ORA-06512: at "SCOTT.EMP_PKG", line 16
why i am not getting all values as out parameters.please provide a solution for me.
Thanks in advance my friend.user9041629 wrote:
Hi All,
i am facing a problem in passing multiple values as out parameters from for loop.
EX:
i have a select statment inside a loop like.....
PACKAGE SPEC:
create or replace PACKAGE EMP_PKG AS
TYPE TAB_NUM IS TABLE OF SCOTT.EMP.EMPNO%TYPE;
TYPE TAB_NAME IS TABLE OF SCOTT.EMP.ENAME%TYPE;
TYPE TAB_JOB IS TABLE OF SCOTT.EMP.JOB%TYPE;
temp_table TAB_NUM;
procedure test(temp_TAB_e_no OUT TAB_NUM,
temp_TAB_e_name OUT TAB_NAME,
temp_TAB_e_job OUT TAB_JOB);
END EMP_PKG;
PACKAGE BODY:
create or replace PACKAGE BODY EMP_PKG AS
v_e_no NUMBER;
procedure test(temp_TAB_e_no OUT TAB_NUM,
temp_TAB_e_name OUT TAB_NAME,
temp_TAB_e_job OUT TAB_JOB) IS
BEGIN
select EMPNO bulk collect into temp_table from emp;
for i in 1..temp_table.count loop
v_e_no := temp_table(i);
select empno,
ename,
job
into temp_TAB_e_no(i),
temp_TAB_e_name(i),
temp_TAB_e_job(i)
from emp
where empno = v_e_no;
end loop;
end test;
END EMP_PKG;
PROBLEM FACING IS:
I am expecting all rows returning from bellow select statment ...
select empno,
ename,
job
into temp_TAB_e_no(i),
temp_TAB_e_name(i),
temp_TAB_e_job(i)
from emp
where empno = v_e_no;
But,while running the SP , i am getting error like
ORA-06531: Reference to uninitialized collection
ORA-06512: at "SCOTT.EMP_PKG", line 16
why i am not getting all values as out parameters.please provide a solution for me.
Thanks in advance my friend.Probably not a bad thing that this isn't working for you.
This is a horrible way to return the contents of a table.
Are you doing this for educational purpose, or ... what is your goal here? If you just want to return a result set to a client you'd want to look in to using a REF CURSOR and not a bunch of arrays combined with horribly procedural (slow) code. -
I want to post the values of the form in the same Jsp Page
I want to post the values of the form in the same Jsp page.
Was that a question? Or are you just informing the world of your grand intentions?
But yeah, all you need to do is direct your action to the same page you're in. So, if this is your foo.jsp, it'd be something like...
<%
if(request.getParameter("bar") != null) out.println("Hello");
%>
<form method="post" action="foo.jsp">
<input type="text" name="bar" value="baz">
<input type="submit">
</form>When you submitted your form, it would post the value to the same JSP page as you're already in, and print out Hello to the screen. "Hello" would not print out on the first visit, as the request would obviously not contain the parameter "bar" yet. -
Hi, I got iMac and I can not open file "doc" when I have downloaded from distance learning internet page. I have office program, but when I try to open file it shows: u1-assesment.doc uses a file type that is blocked from opening in this version.?
I have tryed to change just extension from doc to docx, but it doesn't work. I am new user, please helpConsider the Mcrosoft Office:Mac forums as well:
Office for Mac forums
Here is an MS page that deals with that error message:
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/bs0811doc-use s-a-file-type-that-is-blocked-from/548ce159-8157-419e-9552-1789594fafe9 -
Passing a value for date parameter from Oracle Forms to BIP
Hi
I have created a report with the following SQL query:
select
d_tables.d_seq,
to_date(d_tables.d_created) creation_date,
d_tables.d_created_by created_by,
d_tables.d_pk,
d_tables.table_name,
d_tables.comments
from
d_tables, d_applications
where
d_tables.d_ppk = d_applications.d_pk
and to_date(d_tables.d_created) >= nvl(:P_CRE_DATE_FROM, to_date(d_tables.d_created))
and to_date(d_tables.d_created) <= nvl(:P_CRE_DATE_TO, to_date(d_tables.d_created))
The parameters P_CRE_DATE_FROM and P_CRE_DATE_TO have been set up as date in BI Publisher with format dd-MMM-yyyy
The report works fine when launched in BI Publisher.
I want to call this report from Oracle Forms and I'm trying to pass the values for both the parameters. However, the report does not generate output based on values passed.
Does it have to do with datatype? Does anyone know a solution for this?
Kind regards,
AparnaThanks for your suggestion. I am already referring to the whitepaper and have integrated Forms with BI Publisher. The parameter passing is working fine for a varchar2 type of parameter. However, for a date type, there seems to be some problem.
-
Passing non-key field values to a form from a tree link
I'd like to be able to link to a record form from a tree, and to pre-populate certain fields in the form from values available in the tree, even if there isn't a record matching the primary key value on the tree.
I hope that makes sense.
Let me fill in some more detail. I have dummy nodes in the tree, which don't correspond to data items, but to types of data items ( underneath which I have the real items ). I've made the dummy nodes a link to the form in the same way as the real items, so that when you click on the dummynode, you go to the form ( which is blank) and can create a new record. I'd like to populate the form with as much information as possible when this happens. I've tried adding the fieldname/formvalue to the link string but with no effect.
Thanks, Mark.
If the forum allowed screenshots to be posted I could show you what I'm trying to achieve.If your form items are of source database column, than it will not work. However, you may create a custom form and have no source for the items. For that, you will need to create a custom procedure to fetch, update and delete the records.
If I understood your question properly...
Denes Kubicek -
Pass a value to a form to be used as a label/readonly
I have a link between a report and an update form. I want to pass the value of a report column to the form to be used as a label. The report column does not exist in the table that the form is based on. How can I do this? I added an item to the form, but that item does not show up in the link details for assignment of a value. Is this a refresh problem?
How do I get the value (VAC_ID) to the form from the link? When you edit the link you can assign column values to the parameters. How can I get the parameter (VAC_ID) to show up as a parameter when it is not in the record?
-
ATrouble in passing parameter to PO Form from a Custom OAF Page
Hi All,
I have created a custom OAF page from where I am calling the standard purchase order screen, the URL which i am using is as below;
form:Respapplshortname:Respkey:STANDARD:PO_POXPOEPO:po_header_id={@PoHeaderId}
I have done the below Form Personalization for the same
Create a when-new-form-instance personalization and create following actions
1)
Type: Builtin
Builtin Type: DO_KEY
Argument: ENTER_QUERY
Create a WHEN NEW ITEM INSTANCE personalisation and create the following actions
1)
Type: Builtin
Builtin Type: GO_ITEM
Argument: PO_HEADERS.SEGMENT1
2)
Type: Property
Object Type: Item
Target Object: PO_HEADERS.SEGMENT1
Property Name: VALUE
Value :==:'PO_HEADER_ID'
3)
Type: Builtin
Builtin Type: DO_KEY
Argument: EXECUTE_QUERY
Here in the below mentioned step
Type: Property
Object Type: Item
Target Object: PO_HEADERS.SEGMENT1
Property Name: VALUE
Value =:253253
If I hard code the value 253253(which is the header_id for PO_NUMBER 10031791) in the field 'value' then the PO_NUMBER form works as expected(PO Form opens up in queried mode and all the data of the PO_NUMBER is pre-populated)
My query here is how do I pass a parameter from OAF page to PO_NUMBER form so that we are able to pass the value dynamically instead of hard coding the value(253253 as mentioned above).
Please revert back as soon as possible in case anyone has inputs or better ways of achieving the above problem statementDid you ever figure out how to resolve this issue. We are facing the same issue and developer is not able to figure out.
Thanks. -
SSIS-How to pass multiple value to stored procedure from table row one by one using ssis package??
I want to execute a stored procedure using ssis.But the problem I am having is that there is a table with 200 rows with only
single column.Now i want to execute stored procedure using value one by one from table .once the stored procedure is executed with top value from table i also want to delete that topmost column value and execute with next table value.and store the result in
text file.
please help me..or provide a package.If you want to do it in SSIS, a way to do this is by using For Each Loop as mentioned above.
Create 1 OBJECT type variable (list of values) and one STRING type variable (one value at a time)
Use EXE SQL Task with ResultSet = FULL RESULT SET and query = SELECT COL FROM TABLE ORDER BY COL ASC...output this to the OBJECT type variable
Next, a For Each loop container with Foreach ADO Enumerator, ADO object source variable = Object type variable and map that to String type variable with index = 0.
Within your for each loop container, select another EXEC SQL Task and pass in an input parameter (the String type variable) and query = EXEC PROC ? -- WHERE ? = String type variable.
This will execute your store procedure just for that one value out of the whole list.
Now within the same For Each loop, select another EXEC SQL Task and again pass in an input parameter (the same String type variable) and query = DELETE FROM TABLE WHERE COL = ? -- WHERE ? = the current value
The above process should A) get the list of values from the table B) pick one value at a time and execute the proc and delete and right after delete that value from the table.
Hope this helps.
-- some further investigation/tweaking may require but it should help you get started. -
How to pass the value of the form element "SR ID" on the URL in Apex
Hi All Good Day!!
I am new to Oracle Application Express, i have been started working from past 2 months. I have a request from client, how we can achieve the same in Apex. Please find the
deatils below.
In my application we have a text item as "SR Number", for that filed they want below scenerio to be work around, could some one help me for the below request.
Check the incoming request for a passed parameter and set it to a value using something like this Request.querystring(“p_t10”). If nothing is passed the form is set up with a blank in the SR ID field, if a value was passed you populate the field, perhaps the log-in page can pick-up the parameter and store it in the session to later be put on the form after successful log-in.
Label: SR ID
Name: p_t10
ID: P1_ENG_SID
URL: http://sampletest.com:6666/pls/temp/f?p=123:1&p_t10=495694-94583875
Below are the deatils of mine Apex versions#
Apex Build: 3.0.1.00.08
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
Schema Compatibility: 2007.05.25
PL/SQL Release 10.2.0.4.0
CORE 10.2.0.4.0
TNS for Solaris: Version 10.2.0.4.0
Internet EXplorer-7
Firefox-12.0
Regards,
Sruthi!!hai Sruthi,
if you know the emply item creation and set vlaue?
Create new item as dummy in target page.
set current value and pass to that dummy item, then can use that value at target page.
f?p=&APP_ID.:20:&SESSION.::&DEBUG.:RP,20:P20_XUSER_SECTION,P20_XROW:&P17_NWM_ACCES_SECTION.,&P17_NWM_DOC_ID.
=Means=
target Page # 20
Target items P20_XUSER_SECTION and ,P20_XROW
Values from current page: &P17_NWM_ACCES_SECTION. for P20_XUSER_SECTION
&P17_NWM_DOC_ID. for P20_XROW
If Tablar form/IR page use the following
#P17_NWM_ACCES_SECTION# for P20_XUSER_SECTION
#P17_NWM_DOC_ID# for P20_XROW -
Pass a value to the procedure from jsp
Hi I need a help..
I have a jsp page which has the value , And I have one stored procedure in a java file. I have to pass this
selected month to that stored procedure. there are 2 input parameters and one out parameter which returns a date files. If i hard code the input parameters i am able to get the date field. the first parameter is in session, that is divisionCode. So no problem with that... but other value the selectedMoth "12/2003" should be passed from the jsp.
help me how to achive this....
my jsp code is
<%
String selectedMonth = request.getParameter("selectedMonth");
String monthLastDate = callPLSQLFunc.getmonthLastDate(divisionCode);
System.out.println("Month Last date is " +monthLastDate);
%>my calling procedure
public String monthLastDate(String divisionCode, String selectedMonth) {
CallableStatement stmt = null;
ResultSet rs=null;
String lastDate ="";
try {
System.out.println("calling the procedure for month end date");
// stmt = con.prepareCall ("{?= call easmsa_front_end_routines_pkg.get_month_end_date(?,?)}");
System.out.println("calling the procedure for month end date");
stmt = con.prepareCall("begin easmsa_front_end_routines_pkg.get_month_end_date_prc(?,?,?); end;");
stmt.setString(1,divisionCode);
System.out.println("division Code is " +divisionCode);
System.out.println("The last_date 1 ");
// stmt.registerOutParameter(2, oracle.jdbc.OracleTypes.VARCHAR);
stmt.setString(2,selectedMonth);
System.out.println("The last_date 2 " +selectedMonth);
stmt.registerOutParameter(3, oracle.jdbc.OracleTypes.DATE);
System.out.println("The last_date 3 ");
stmt.execute();
System.out.println("getting the value");
// lastDate = stmt.getDate(3);
System.out.println(stmt.getDate(3));
// System.out.println("The last_date " +lastDate);
} catch (SQLException e) {
e.printStackTrace();
return lastDate;
public String getmonthLastDate(String divisionCode,String selectedMonth){
String monthLastDate = monthLastDate(divisionCode,selectedMonth);
return monthLastDate;Well, you'd just pass the parameter ....
String monthLastDate = callPLSQLFun.getmonthLstDate(divisionCode, selectedMonth);
[/code[
... or am I totall misunderstanding your question??
Also, you have two methods which are public, and all one does is call the other with exactly the same parameters passed. Why not just call monthLastDate() instead of getmonthLastDate() ... it does exactly th same thing, only without the extra call.
I think maybe you need to grasp the basics of Java a little better before delving into the world of JSP. -
How can I pass parameter value into first form?
hello all
I have one form called logon.fmx
I have parameter in that form called "common_home".
when I run that form browser I need to trasfer the value for parameter "common_home".
how can I do this?
From
Chirag PatelHi all
1) I am used to config='myconfig' in my application to run the application from browser.
2) in formsweb.cfg I have add one more parameter like as follows
otherparams=common_home=c:\chirag\erp
3) you can add n number of user defined parameter here.
it is working fine.
From
Chirag Patel -
Passing array values to an Applet from JSP
Hi,
I have a JSP page in which I've arrays that are populated from a DB. I want to pass these array values from the JSP page to a Applet in the same page. Is it possible ?
Any help will be appreciated.
:-) PraveenThen the answer is no. The Applet doesn't exist until it is instanciated by the browser so the JSP running on the server can not pass Java Objects. You can either set up a javascript array, set the parameter tags in the HTML Applet tag or have the Applet open a URLConnection back to the server.
Maybe you are looking for
-
I recently upgraded to itunes 10.6 on my MacBook Pro and since then, whenever i'm in album view, itunes crashes as you try to scroll down the view. I have not loaded any plug-ins to my knowledge and have just loaded my CD collection over a few years.
-
hello please review this website. www.princemoe.com the webpage seems not to load the way it should be in firefox. and music doesn;t work.. why? how do i fix this problem. would appreciate. thank you. moe
-
Web layout displays fine in Safari, Firefox but not in IE6
HI there Am new to this forum and really hope you can help. I have designed a website for someone integrating various flash files into dreamweaver 2004 MX. Each flash file represents, top nav bar, side nav bar, right nav bar, title of body, and body
-
I have a large application (project) that has been deployed. I have a new application but want to be able to pull the old app into the new one. Im hoping i could just use some sort of includeProject and pass it a few variables. Is this possible? Than
-
I am trying to update my Garmin GPS. The new download plugin won't install.